+ All Categories
Home > Education > Jigs fixtures

Jigs fixtures

Date post: 12-Jun-2015
Category:
Upload: yashwant-raj-verma
View: 2,138 times
Download: 12 times
Share this document with a friend
Description:
Here i have presented a brief detail about jigs and fixture along with picture.
Popular Tags:
15
Definition What are jigs and fixtures? • Used to hold and guide work pieces • Used to accurately manufacture duplicate parts
Transcript
Page 1: Jigs fixtures

Definition

What are jigs and

fixtures?

• Used to hold and guide work pieces

• Used to accurately manufacture duplicate parts

Page 2: Jigs fixtures

Why Use Jigs & Fixtures?

• Quality

• Safety

Page 3: Jigs fixtures

Common Fixture Systems

Hold down clamp on a compound miter saw

Jig adjustable fence found on most table saws

Page 4: Jigs fixtures

Common Fixture Systems

Page 5: Jigs fixtures

Common Fixture Systems

Page 6: Jigs fixtures

Common Fixture Systems

Simple aftermarket vice system, shown on the bed of a milling machine

Page 7: Jigs fixtures

Strap Clamps

Page 8: Jigs fixtures

Strap Clamps

Strap clamps holding a piece of stock for cutting

Page 9: Jigs fixtures

The V-Block

V-Blocks can be used to hold cylindrical stock for machining or drilling operations

Page 10: Jigs fixtures

The V-Block

Strap clamps affix v-blocks to the mill table

V-block setup holding a piece of copper tubing

Page 11: Jigs fixtures

More Advanced Fixtures

Pneumatic vice

Page 12: Jigs fixtures

More Advanced Fixtures

Air vice

Page 13: Jigs fixtures

More Advanced Fixtures

• Rubber stoppers

• Aluminum bushing rods

• Size limitations

• Cutting speed limitations

• No base obstructions

Page 14: Jigs fixtures

More Advanced Fixtures

Venture System releases air through the nozzle, which in turn creates a vacuum in the base of the air vice

Nozzle

Air supply

Air pressure regulator

This end attaches to the base

Page 15: Jigs fixtures

Image Resources

Inside Woodworking. Retrieved June 12, 2008, from http://www.insidewoodworking.com/tools/images/woodworking-jigs-tennoning-jig.jpg

Rockler. Retrieved June 12, 2008, from http://www.rockler.com/gallery.cfm?Offerings_ID=17367&TabSelect=Details


Recommended