jktLFkku ljdkj - Rajasthanagriculture.rajasthan.gov.in/content/dam... · authorized distributors...

jktLFkku ljdkj

dk;kZy; la;qDr funs'kd d`f"k

¼xq.k fu;U=.k½

nqxkZiqjk] t;iqj &302018

nwjHkk"k ,oa QSDl la[;k% 0141&2554755

Office of the Joint Director Agriculture(Quality Control) Durgapura, Jaipur.302018 Phone No. 0141-2554755

dzekad%&,Q6¼½la-fu-d`-@xq-fu-@2017@1080 fnukad%& 08-02-2017

NOTICE INVITING BID (NIB)

Joint Director, Agriculture (Quality Control), Durgapura, Jaipur (Rajasthan)

invites following e-Bid from the eligible bidders on turnkey basis through

open competitive e-Bid procedure.

S.No. Name of item /works Total Estimated

cost (Rs in lac)

bid start date

& time

bid end date &

time

1 Procurement & installation of

Laboratory equipments from

manufactures or their

authorized distributors

/dealers for use in State

pesticide Testing Laboratory

Bharatpur under Department

of Agriculture, Govt.of

Rajasthan.

22.25

10.02.2017

10.00 AM

27.02.2017

05.00 PM 2. Procurement & installation of

Laboratory equipments from

manufactures or their

authorized distributors

/dealers for use in State Bio-

pesticide Testing Laboratory

Durgapura, Jaipur Under

Department of Agriculture,

Govt. of Rajasthan.

17.92

TOTAL (Rs.) 40.17

Details may be seen in the Bidding Document at the office of Joint Director,

Agriculture(Quality Control),Durgapura, Jaipur or website e-Procurement portal

(http://eproc.rajasthan.gov.in), State Public Procurement Portal (http://sppp.raj.

nic.in), (http://krishi.rajasthan.gov.in) and (http://dipr.rajasthan.gov.in). The

biding document may be downloaded from either of the above websites &

uploaded duly filled in with payment of Rs. 1000/- in cash or through Banker’s

Cheque/Demand Draft in favour of Joint Director, Agriculture (Quality

Control),Durgapura, Jaipur, payable at Jaipur

Joint Director,

Agriculture(Quality Control),

Durgapura, Jaipur

http://eproc.rajasthan.gov.in/

http://krishi.rajasthan.gov.in/

http://dipr.rajasthan.gov.in/

Page 1 of 119

–––––cument History

Overview Procurement Policy Manual for RajCOMP Info Services Limited

Document

Title

RajCOMP Info Services Limited- Manual on Policies and Procedures for

Procurement

Document

Status

Final

Abstract This document provides a broad framework and guidelines for RajCOMP

Info Services Limited Staff in carrying out various procurement activities.

Document Publication History

Date Author Version Remark

17th February 2011 Dr. S.S. Vaishnava V3 Final Version

Distribution

Version Name Location

Final MD RajComp Info Services

Limited

RajComp Info Services Limited office,

Jaipur

Secretary (IT) RajComp Info Services Limited office,

Jaipur

Department of Agriculture Government of Rajasthan (GoR)

RFP documents for supply and installation of Laboratory equipments from Manufacturers or their Authorised Distributors/Dealers for the use in Pesticide& Bio Pesticide Testing Laboratory under Department of Agriculture, Government of Rajasthan.

2017

RFP for supply of Laboratory Equipments

Page 2 of 119

Request for Proposal (RFP) Document for supply and installation of Laboratory equipments from Manufacturers or their

Authorised Distributors/Dealers for the use in Pesticide & Bio PesticideTesting Laboratory Through e- Bidding Procedure

Reference No.: F6( )JDAg/QC/2017/1080 Dated08-02-2017

Mode of Bid Submission Online through e-Procurement/ e-Tendering

system at http://eproc.rajasthan.gov.in

Procuring Authority Joint Director, Agriculture, (Q.C.) Durgapura

,Jaipur

Last Date & Time of Submission of Bid 27.02.2017at 5.00PM

Date & Time of Opening of Technical Bid 28.02.2017at 11.00AM

Bidding Document Fee: Rs. 1000 (Rupees One Thousand only)

Name of the Bidding Company/ Firm:

Contact Person(Authorised Bid Signatory):

Correspondence Address:

Mobile No. Telephone & Fax Nos.:

Website & E-Mail:

Department of Agriculture

Joint Director ,Agri.(Q.C.) ,Durgapura , Jaipur (Rajasthan), 302018

Phone: 0141-2554755; Web: http://krishi.rajasthan.gov.in, Email:

[email protected], [email protected]



Page 3 of 119

Table of Contents

DOCUMENT PUBLICATION HISTORY 2

BIDDING DOCUMENT FEE: RS. 1000 (RUPEES ONE THOUSAND ONLY) 2

TABLE OF CONTENTS 3

ABBREVIATIONS & DEFINITIONS ............................................................................................................ 6

INVITATION FOR BIDS (IFB)& NOTICE INVITING BIDS (NIB) ..................................................................... 9

1. PROJECT PROFILE & BACKGROUND INFORMATION .......................................................................... 11

2.QUALIFICATION/ ELIGIBILITY CRITERIA ............................................................................................... 11

3.SCOPE OF WORK, DELIVERABLES & TIMELINES .................................................................................. 14

4.INSTRUCTION TO BIDDERS (ITB) ............................................................................................................ 18

1) Bid Security 18

2) Downloading of Bidding/ Tender Documents 19

3. i)Pre-bid Meeting/ Clarifications 19

3. ii)Changes in the Bidding Document 20

4) Period of Validity of Bids 20

5) Format and Signing of Bids 21

6) Cost & Language of Bidding 22

7) Alternative/ Multiple Bids 22

8) Deadline for the submission of Bids 22

9) Withdrawal, Substitution, and Modification of Bids 23

10) Opening of Bids 23

11) Selection Method: 24

12) Clarification of Bids 24

13) Evaluation & Tabulation of Technical Bids 24

14) Evaluation & Tabulation of Financial Bids 27

15) Correction of Arithmetic Errors in Financial Bids 27

16) Comparison of rates of firms outside and those in Rajasthan 28

17) Negotiations 28

18) Exclusion of Bids/ Disqualification 29

19) Lack of competition 29

20) Acceptance of the successful Bid and award of contract 30

21) Information and publication of award 31

22) Procuring entity’s right to accept or reject any or all Bids 31

23) Right to vary quantity 31

24) Performance Security 31

25) Execution of agreement 33

26) Confidentiality 33


Page 4 of 119

27) Cancellation of procurement process 34

28) Code of Integrity for Bidders 35

29) Conflict of Interest 36

30) Interference with Procurement Process 36

31) Appeals 36

32) Stay of procurement proceedings 38

33) Vexatious Appeals & Complaints 38

34) Offenses by Firms/ Companies 39

35) Debarment from Bidding 39

36) Monitoring of Contract 40

5. GENERALTERMS AND CONDITIONS OF TENDER &CONTRACT ................................................... 41

Definitions 41

1) Contract Documents 42

2) Interpretation 42

3) Language 43

4) Joint Venture, Consortium or Association 43

5) Eligible Goods and Related Services 43

6) Service of Notice, Documents & Orders 43

7) Scope of Supply 43

8) Delivery & Installation 44

9) Supplier’s/ Selected Bidder’s Responsibilities 44

10) Purchaser’s Responsibilities 44

11) Contract Price 45

12) Recoveries from Supplier/ Selected Bidder 45

13) Taxes & Duties 45

14) Confidential Information 46

15) Specifications and Standards 47

16) Packing and Documents 47

17) Insurance 48

18) Transportation 48

19) Inspection 48

20) Testing charges 49

21) Rejection 49

22) Payments 49

23) Liquidated Damages (LD) 49

24-27) Bidder,Settlement of disputes,Authenticity ofEquipment 50

28) Warranty 51

29) Limitation of Liability 51


Page 5 of 119

30) Force Majeure 52

31) Change Orders and Contract Amendments 52

32) Termination 53

6. SPECIAL TERMS AND CONDITIONS OF TENDER & CONTRACT .................................................... 55

1) Payment Terms and Schedule 55

2) Service Level Standards/ Requirements 56

ANNEXURE-1: BILL OF MATERIAL (BOM) .................................................................................................. 58

ANNEXURE-2: FORMAT FOR TECHNICAL SPECIFICATIONS WITH COMPLIANCE SHEET:...................................... 60

ANNEXURE-3:UNDERTAKING: .................................................................................................................. 81

ANNEXURE-4: PRE-BID QUERIES FORMAT ............................................................................................. 82

ANNEXURE-5: BIDDER’S AUTHORIZATION CERTIFICATE{TO BE FILLED BY THE BIDDER} ........................ 83

ANNEXURE-6: SELF-DECLARATION{TO BE FILLED BY THE BIDDER} ............................................................ 84

ANNEXURE-7: CERTIFICATE OF CONFORMITY/ NO DEVIATION{TO BE FILLED BY THE BIDDER} .............. 85

ANNEXURE-8: DECLARATION BY BIDDER{TO SIGNED BY SELECTED BIDDER} ............................................ 86

ANNEXURE-9: MANUFACTURER’S AUTHORIZATION FORM (MAF){TO BE FILLED BY THE OEMS} ............ 87

ANNEXURE-10: UNDERTAKING ON AUTHENTICITY OF LABORATORY EQUIPMENTS ......................... 88

ANNEXURE-11: ITEMS OFFERED – BOM{TO BE FILLED BY THE BIDDER} ...................................................... 89

ANNEXURE-12: FINANCIAL COVER LETTER & FORMAT ....................................................................... 90

ANNEXURE-13: DRAFT AGREEMENT FORMAT .................................................................................... 109

ANNEXURE-14: MEMORANDUM OF APPEAL UNDER THE RTPP ACT, 2012 ....................................... 111

ANNEXURE-15: BANK GUARANTEE FORMAT ........................................................................................ 112

ANNEXURE-16: BANK GUARANTEE FORMAT – PERFORMANCE SECURITY (PBG) .......................... 115

ANNEXURE-17: COST OF THE TOTAL ITEMS WITH EARNEST MONEY 117

ANNEXURE 18: LIST OF LOCATION WHERE THE EQUIPMENTS ARE TO BE SUPPLIED ............................................. 119


Page 6 of 119

ABBREVIATIONS & DEFINITIONS

RTPP Act The Rajasthan Transparency in Public Procurement Act, 2012 (Act No.

21 of 2012) and Rules thereto

Authorised

Signatory

The bidder’s representative/ officer vested (explicitly, implicitly, or through

conduct) with the powers to commit the authorizing organization to a

binding agreement. Also called signing officer/ authority having the Power

of Attorney (PoA) from the competent authority of the respective Bidding

firm.

Bid A formal offer made in pursuance of an invitation by a procuring entity

and includes any tender, proposal or quotation

Bid Security

A security provided to the procuring entity by a bidder for securing the

fulfilment of any obligation in terms of the provisions of the bidding

documents.

Bidder Any original manufacturer/Proprietor/Partnership

firm/companyparticipating in the procurement/ bidding process with the

procurement entity

Bidding Document

Documents issued by the procuring entity, including any amendments

thereto, that set out the terms and conditions of the given procurement

and includes the invitation to bid

BG Bank Guarantee

BoQ Bill of Quantity

CMC Contract Monitoring Committee

Competent Authority An authority or officer to whom the relevant administrative or financial

powers have been delegated for taking decision in a matter relating

to procurement. Director, Agriculture Govt. of Rajasthan in this bidding

document.

Contract/

Procurement

Contract

A contract entered into between the procuring entity and a successful

bidder concerning the subject matter of procurement

Contract/ Project

Period

The Contract/ Project Period shall commence from the date of issue of

Work order till two years of Maintenance Services after commissioning of

the project.

Day A calendar day as per GoR/ GoI.

DoA Department of Agriculture, Government of Rajasthan.

eGRAS Online Government Receipts Accounting System (e-GRAS) is an e-

Governance Initiative of Government of Rajasthan under Mission Mode

Project category and is part of Integrated Financial Management System

(IFMS). e-GRAS facilitates collection of tax/ non-tax revenue in both the

modes: online as well as manual. All types of government revenue may

be deposited online using this website: https://egras.raj.nic.in/

https://egras.raj.nic.in/


Page 7 of 119

FOR/ FOB Free on Board or Freight on Board

GMP Good Manufacturing Practices

GoI/ GoR Govt. of India/ Govt. of Rajasthan

Goods

All articles, material, commodities, electricity, livestock, furniture, fixtures,

raw material, spares, instruments, software, machinery, equipment,

industrial plant, vehicles, aircraft, ships, railway rolling stock and

any other category of goods, whether in solid, liquid or gaseous form,

purchased or otherwise acquired for the use of a procuring entity as well

as services or works incidental to the supply of the goods if the

value of services or works or both does not exceed that of the goods

themselves

IFB

Invitation for Bids (A document published by the procuring entity inviting

bids relating to the subject matter of procurement and any amendment

thereto and includes notice inviting bid and request for proposal)

INR Indian Rupee

BIS Bureau of Indian Standards

IT Information Technology

ITB Instruction to Bidders

JD Agri. (QC) Shall mean Joint Director Of Agriculture (Quality Control), Durgapura , Jaipur.

LD Liquidated Damages

LoI Letter of Intent

NCB A bidding process in which qualified bidders only from within India are allowed to participate

NIB Notice Inviting Bid

Notification A notification published in the Official Gazette

OEM Original Equipment Manufacturer

PAN Permanent Account Number

PBG Performance Bank Guarantee

PC Procurement/ Purchase Committee

PQ Pre-Qualification

Procurement

Process

The process of procurement extending from the issue of invitation to bid

till the award of the procurement contract or cancellation of the

procurement process, as the case may be

Procurement/ Public

Procurement

The acquisition by purchase, lease, license or otherwise of works, goods

or services, including award of Public Private Partnership projects, by a

procuring entity whether directly or through an agency with which a

contract for procurement services is entered into, but does not include

any acquisition without consideration, and “procure” or “procured” shall


Page 8 of 119

be construed accordingly

Project Site Wherever applicable, means the designated place or places.

PSD/ SD Performance Security Deposit/ Security Deposit

Purchaser/

Tendering Authority/

Procuring Entity

Person or entity that is a recipient of a good or service provided by a

seller (bidder) under a purchase order or contract of sale. Also called

buyer. Department of Agriculture, GoR in this RFP document.

RFP Request For Proposal

RVAT Rajasthan Value Added Tax

SP Service Provider

State Government Government of Rajasthan (GoR)

SPTL State Pesticide Testing Laboratory

SBPTL State Bio Pesticide Testing Laboratory, Durgapura, Jaipur

State Public Procurement Portal

http://sppp.raj.nic.in

Subject Matter of Procurement

Any item of procurement whether in the form of goods, services or works

TIN Tax Identification Number

TPA Third Party Auditors

VAT/ CenVAT Value Added Tax/ Central VAT

WO/ PO Work Order/ Purchase Order

RISL RajCOMP Info Services Limited

http://sppp.raj.nic.in/


Page 9 of 119

INVITATION FOR BIDS (IFB)& NOTICE INVITING BIDS (NIB)

Name & Address of the

Procuring Entity

Name: Joint Director, Agriculture (Q.C.), Department of Agriculture, GoR

Address: ARS ,Durgapura Jaipur (Rajasthan)-302018

Name & Address of the

Project Officer In-charge

(POIC)

Name: K.C.Meena

Designation: Joint Director,Agriculture (QC)

Address:, ARS ,Durgapura Jaipur (Rajasthan)-302018

Email: [email protected], [email protected]

Subject Matter of

Procurement

supply and installation of Laboratory equipment from Manufacturers or their Authorised Distributors/Dealers for the use in Pesticide Testing Laboratory at Bharatpur & Bio pesticide Testing Laboratory at Durgapura, Jaipur under Deptt. of Agriculture ,Govt. of Rajasthan.

Bid Procedure Single-stage: two part (envelop) open competitive e-bid procedure at

http://eproc.rajasthan.gov.in

Bid Evaluation Criteria

(Selection Method)

Lowest evaluated Technically qualified bidder may be awarded the

Contract

Websites for downloading

Bidding Document,

Corrigendum’s, Addendums

etc.

Websites:http://eproc.rajasthan.gov.in,http://sppp.raj.nic.in,

http://dipr.rajasthan.gov.in,http://krishi.rajasthan.gov.in,

Bidding document fee: Rs. 1000/- (Rupees One Thousand only) in

Cash/Banker's Cheque/ Demand Draft in favour of "Joint Director

,Agri.(Q.C.), Durgapura , Jaipur"payable at “Jaipur”.

Period of Sale of Bidding

Document

Start Date:10.02.2017at 11.00 AM

End Date: 27.02.2017at 05.00 PM

Estimated Procurement

Cost

Rs. 22.25 Lacs (Rupees Twenty Two Lacs& twenty five thousands only)

for pesticide lab Bharatpur & Rs. 17.92 lacs ( Rupees seventeen lacs and

ninety two thousand only) for Bio pesticide Testing Lab. Durgapura, Jaipur

Bid Security : Mode of Payment, Date,Timeand Place of submission

Amount (INR): Rs80000/- for all the items(Bid security will be 2% of the estimated cost of the quoted items as per Annexure 17) For small scale industry of Rajasthan amount Rs.20000/- ( 0.5% of the estimated cost of quoted item.) For sick industry other than the small scale industry amount Rs40000/-(1% of the estimated cost of quoted item.) Mode of Payment: Cash/Banker’s Cheque or Demand Draft or Bank guarantee in sprcified format(Annexure 16) , of a scheduled bank or

deposit through eGRAS (http://egras.raj.nic.in/)in favour of "Joint Director of Agriculture,(Q.C.),Durgapura , Jaipur " payable at “Jaipur”

Last Date and Time : 27.02.2017 at 05.00 PM

Place – Office of Joint Director Agriculture.(Q.C.) Durgapura ,Jaipur RISL Processing Fee Amount (INR): Rs. 500/- Demand Draft & Bankers Cheque in favour

of “Managing Director, RajCOMP Info Services Ltd.” payable at

“Jaipur” from any Scheduled Commercial Bank.

Manner & Deadline for the

submission of Bids Manner: : Online at e-Procurement website

(http://eproc.rajasthan.gov.in)

Start Date 10.02.2017 at 11.00 AM

End Date: 27.02.2017 at 05.00 PM

Pre Bid Meeting 15.02.2017 At 2.30 PM in – O/O Joint Dag.(Q.C.) Durgapura

,Jaipur

Manner & Deadline for the

submission of Queries

Manner: : Online at e-Procurement website

(http://eproc.rajasthan.gov.in)

Last date of submitting clarifications requests by the bidder: 15/02/2017

;Response to queries/clarifications by procuring entity: 17/02/2017



http://sppp.raj.nic.in/

http://dipr.rajasthan.gov.in/

http://doitc.rajasthan.gov.in/

http://egras.raj.nic.in/




Page 10 of 119

Date/ Time/ Place of

Technical Bid Opening

Date: 28.02.2017

Time: 11.00 AM

Place: – Committee Room, First Floor, Pant Krishi Bhawan,

Janpath ,Jaipur

Date/ Time/ Place of

Financial Bid Opening Will be intimated later to the Technically qualified bidders

Bid Validity 90 days from the bid submission deadline

Note:

1) Bidder (authorised signatory) shall submit their offer on-line in Electronic formats both for technical and financial proposal. However, DD for Tender Fees, RISL Processing Fees, Bid Security & Annexure-3 (Undertaking) should be submitted physically at the office of Tendering Authority as prescribed in NIB and scanned copy of same should also be uploaded along with the technical Bid/ cover.

2) In case, any of the bidders fails to physically submit the Banker’s Cheque/ Demand Draft for Tender Fee, Bid Security, RISL Processing Fee and Annexure-3(Undertaking) up to time

mentioned in NIB at – O/O Joint Dag.(Q.C.) Durgapura , Jaipur, its bids shall not be opened. The Banker’s Cheque/ Demand Draft for Bidding document fee and Bid Security should be drawn in favour of “Joint Director Agriculture,(Q.C.) , Durgapura ,Jaipur” and the RISL Processing Fee in favour of “Managing Director, RajCOMP Info Services Ltd.” payable at “Jaipur” from any Scheduled Commercial Bank.

3) To participate in online bidding process, Bidders must procure a Digital Signature Certificate (Type III) as per Information Technology Act-2000 using which they can digitally sign their electronic bids. Bidders can procure the same from any CCA approved certifying agency, i.e. TCS, Safecrypt,Node etc. Bidders who already have a valid Digital Signature Certificate (DSC) need not procure a new DSC. Also, bidders must register on http://eproc.rajasthan.gov.in (bidders already registered on http://eproc.rajasthan.gov.in before 30-09-2011 must register again).

4) Joint Director Agriculture,(Q.C.) , DoA will not be responsible for delay in online submission due to any reason. For this, bidders are requested to upload the complete bid well advance in time so as to avoid 11th hour issues like slow speed; choking of web site due to heavy load or any other unforeseen problems.

5) Bidders are also advised to refer "Bidders Manual Kit" available at e-Procurement website for further details about the e-Tendering process.

6) Training for the bidders on the usage of e-Tendering System (e-Procurement) is also being arranged by DoIT&C on a regular basis. Bidders interested for training may contact e-Procurement Cell, DoIT&C for booking the training slot.

Contact No: 0141-4022688 (Help desk 10 am to 6 pm on all working days)

e-mail: [email protected]

Address : e-Procurement Cell, RISL, YojanaBhawan, TilakMarg, C-Scheme, Jaipur

7) The procuring entity reserves the complete right to cancel the bid process and reject any part or all of the bids.

8) No contractual obligation whatsoever shall arise from the bidding document/ bidding process unless and until a formal contract is signed and executed between the procuring entity and the successful bidder.

9) Procurement entity disclaims any factual/ or other errors in the bidding document (the onus is purely on the individual bidders to verify such information) and the information provided therein are intended only to help the bidders to prepare a logical bid-proposal.

10) The provisions of RTPP Act 2012 and Rules thereto shall be applicable for this procurement. Furthermore, in case of any inconsistency in any of the provisions of this bidding document with the RTPP Act 2012 and Rules thereto, the later shall prevail.


Page 11 of 119

1. PROJECT PROFILE & BACKGROUND INFORMATION

Project Profile

As per Cabinet Order No 33/2014 Point No 04 it is directed to set up a New Pesticide Testing

at Bharatpur and to enhance the use of Bio pesticide and quality check, Bio pesticide lab has

been established at Durgapura, Jaipur.

The role of Pesticides and Bio pesticide in increasing productivity and production in fulfilling

the need-based agricultural targets needs hardly emphasized. Pesticides and Bio pesticide are

required in agriculture for protecting crops against pests and disease, enhancing crop

productivity, increasing farm income, . In order to achieve above stated objectives, primarily,

for obtaining optimum level of production and productivity and harvest quality produce, it is

imperative to ensure availability of quality Pesticides and Bio pesticide as per standard laid

down in Insecticide act, 1968.

With the increasing consumption of Pesticides and Bio pesticide, it is also essential to give

impetus to sampling of Pesticides andBiopesticidein order to ascertain quality of pesticides

and Bio pesticide provided to the farmers.

2.QUALIFICATION/ ELIGIBILITY CRITERIA

1) A bidder participating in the procurement process shall possess the following minimum pre-

qualification/ eligibility criteria.

S.

No.

Basic

Requirement

Specific Requirements Documents

Required

1 Legal Entity 1. The bidder should be a Proprietorship firm

duly registered either under the Rajasthan

Shops & Commercial Establishments Act,

1958 or any other Act of State/ Union, as

applicable for dealing in the subject matter

of procurement

(Note: A self-certified declaration regarding the

non-applicability of registration to any Act

should be submitted by the bidder)

OR

2. A company registered under Indian

Companies Act, 1956

OR

3. A partnership firm registered under Indian

Partnership Act, 1932.

(If the bidding party is a partnership

establishment or a partnership company, the

labour license should be in the name of that

1.- Copy of valid

Registration

Certificates

2. Copy of valid

Registration

Certificates

-Copy of

Certificates of

incorporation

3. Copy of valid

Registration

Certificates

List of partners

with partnership


Page 12 of 119

S.

No.

Basic

Requirement


Required

partnership establishment, or in the name of

partnership Company.)

OR

4. An organisation registered under Rajasthan

State Trust Act/Indian Trusts Act

1882/Society Registration Act, 1860/Any

other Trust or Society Act of Government of

India/Department of GOI/GoR

OR

5. Small Scale Industry of Rajasthan and Sick

Industry other than small scale industry

OR

6. Manufacturer, dealer and distributor are

eligible to participate in the bidding process.

(In case bidder is not an OEM then an

authorised undertaking will be required

from the OEM stating that OEM will

discharge all responsibilities under warranty

for the period indicated in the contact, in

case the bidder fails to do the same for any

reason.)

deed,

4) Copy of valid

Registration

Certificates from

Registrar of

Societies

5) Copy of

Registration and

Proof regarding

small scale

industry or sick

industry

6) Manufacturers

Authorization

Certificate as per

annexure 8

2 Financial:

Turnover

1. For Laboratory Equipments:

i. Minimum average annual Turnover from

the bidder during last three financial years,

i.e., for the period of FY 2013-14 to FY

2015-16 should be 2.5 times of the

estimated value of the quoted item/items .

OR

ii. Minimum average annual Turnover from

the bidder during last three financial years,

i.e., for the period of, i.e., for the period of

FY 2013-14 to FY 2015-16 should be 2.5

times of the estimated value of the quoted

item/items .

Note:

i) If any bidder quotes for more than one item,

the turnover should be 2.5 times of the total

estimated cost of the items in the bid

document.

ii) SSI and Sick industry is exempted

1. CA Certificate

with CA’s

Registration

Number/ Seal

2. Valid proof

issued by

competitive

authority


Page 13 of 119

S.

No.

Basic

Requirement


Required

3 Financial:

Net Worth

i) The net worth of the bidder during last

three financial years, i.e., for the period of

FY 2013-14 to FY 2015-16 should be

Positive.

ii) Note: SSI and Sick industry isExempted.

i) CA Certificate

with CA’s

Registration

Number/ Seal

ii) Valid Proof

issued by the

competent

authority

4 Technical

Capability

. For Laboratory Equipments:

The bidder must have successfully executed

two orders of supply and satisfactory working

of similar nature of instruments (scientific

analytical)during the last five years for

government/ semi govt. departments,

government recognized organizations or

institutions.

work order

certificate

And

Work Completion

Certificates from

the client

5 OEM The bidder should be an Original Equipment

Manufacturer or an authorized distributor/

dealer for Maintenance support and services of

the OEM in India. The bidder must attach

Manufacturing Authorization & Back-to-back

support for all the items to be covered through

this tender.

As per Annexure-

8

6 Tax

registration

and

clearance

The bidder should have a registered number of

i. VAT/ CST where his business is located

ii. Pan number.

The bidder should have cleared his VAT/ CST

dues to the Government up to 31/03/2016 or

later.

1 Copies of relevant

certificates of

registration number

VAT/ CST

clearance certificate

from the

Commercial Taxes

Officer of the Circle

concerned

2 Copy of Pan No.

7. Mandatory Undertaking

Bidder should: -

a) not be insolvent, in receivership, bankrupt

or being wound up, not been blacklisted,

not have its affairs administered by a court

or a judicial officer, not have its business

activities suspended and must not be the

subject of legal proceedings for any of the

foregoing reasons;

b) not have, and their directors and officers not

have, been convicted of any criminal

offence related to their professional conduct

A Self Certified

letter as per

Annexure-4: Self-

Declaration


Page 14 of 119

S.

No.

Basic

Requirement


Required

or the making of false statements or

misrepresentations as to their qualifications

to enter into a procurement contract within a

period of three years preceding the

commencement of the procurement

process, or not have been otherwise

disqualified pursuant to debarment

proceedings;

c) not have a conflict of interest in the

procurement in question as specified in the

bidding document.

d) comply with the code of integrity as

specified in the bidding document.

2) In addition to the provisions regarding the qualifications of the bidders as set out in (1) above: -

a. the procuring entity shall disqualify a bidder as per the provisions under “Clause:Exclusion/

Disqualification of bids ITB”; and

b. The procuring entity may require a bidder, who was pre-qualified, to demonstrate its

qualifications again in accordance with the same criteria used to pre-qualify such bidder.

The procuring entity shall disqualify any bidder that fails to demonstrate its qualifications

again, if requested to do so. The procuring entity shall promptly notify each bidder

requested to demonstrate its qualifications again as to whether or not the bidder has done

so to the satisfaction of the procuring entity.

3.SCOPE OF WORK, DELIVERABLES & TIMELINES

1) Details of work for Equipments

a) The supplier shall be responsible to provide required items mentioned in Annexure – 1:

Bill of Material (BoM) and Annexure-2: Technical Specifications of this RFP

document.

The bidding party has the option to apply for tender in one item or more than one item

(details as per the annexure 2). Accordingly, the EMD has to be submitted as per

Annexure 17.

b) Supplier shall deliver the laboratory equipments item no. 1-9 at Pesticide testing lab. At

Bharatpur and item no.at 10-11 at Bio pesticide testing lab Durgapura, Jaipur. ( Annexure -

1) The delivery period will be as per Annexure 17.

c) Supplier shall install, configure the supplied items and provide onsite training.

The Supplier shall be responsible to provide two years on site OEM warranty as per Warranty

clause of Chapter-6 (General terms & Conditions) and five years non comprehensive Annual

Maintenance Contract for item no. 1 (GLC Complete Unit), 2 (Analytical Balance), 5(UV-VIS


Page 15 of 119

Spectrophotometer), 9(Photocopier), 10(ELISA Complete Unit) and 11 (Fluorescent

Microscope with Phase Contrast) at Annexure 1&2from the date of expiry of OEM warranty

period for which separate PSD will be deposited based on the average value of the AMC

contract. Cost of five years Maintenance service after warranty period would be evaluated from the

price schedule and would be taken in to account for evaluation of item no. 1,2,5,9,10 & 11. Average

value of five years AMC cost will be computed into account.

d) The scope of On-site non comprehensive Annual Maintenance Contract (AMC) of equipment at item no.1,2,5,9,10 & 11. (at annexure1&2) installed at SPTL Bharatpur and SBPTL, Durgapura Jaipur in Rajasthan state is as follows:

i. To carryout two preventive and two corrective maintenance visits per year as and when required.

ii. To prepare maintenance report for, each maintenance activity carried out and verified by the laboratory in-charge half yearly and sending a copy to Joint Director, Agriculture, (Quality Control), Durgapura , Jaipur.

iii. To provide and undertake all related software loading (if required) and maintain data backup for the same at the time of maintenance activity.

iv. The firm entered in purchase agreement shall be wholly responsible for entire warranty and AMC period of the equipment.

v. The bidder will be responsible for the maintenance of complete unit of equipment including all the accessories.

A. Preventive Maintenance Services I. Preventive maintenance Services of the equipments are required to be taken up by the

SP on half yearly basis 15 days before the end of each half of the year. However, if recommended by an OEM for any item covered, the frequency will be revised accordingly.

II. The SP has to inform the Purchaser about the schedule of preventive maintenance at least 5 days before. The Purchaser may not approve any request for preventive maintenance not made 5 days before and any delay arising due to such request will be calculated in account of the SP.

III. The Purchaser will make necessary arrangement to communicate to users about the schedule of the preventive maintenance services.

IV. List of spare parts with indicative cost declared by OEM will be supplied by the bidder on original OEM letter-head at the time of entering into AMC agreement and any revision made by OEM thereof.

V. Following preventive maintenance services are required to be taken up by the SP on a regular basis as per decided schedule: -

a) To conduct preventive maintenance (including inspection, cleaning of the equipments, testing, satisfactory execution of all diagnostics, necessary repairing of the equipment etc.) in each half of the year.

b) Other preventive maintenance activities of components as per their manufactures’ recommendation/ advice.

c) The preventive maintenance can be carried out as per the schedule on Saturdays/Sundays/ Government Holidays.

d) Cleaning and removal of dust and dirt from the interior and exterior of the equipments.

e) Preventive Maintenance by the SP may require him to shutdown equipments. For all such requirements, necessary permission of downtime should be taken from the Purchaser. All such downtimes will be treated as “Planned Downtime”.


Page 16 of 119

f) SP shall replace any damaged subsystem/ parts. The cost of the damaged or the spare parts will be provided by the purchaser. The price list of such parts will be provided by the SP (as per the OEM price list).

g) SP shall check that all the screws and fasteners are properly screwed.

h) SP shall replace/repair the faulty cable/cable connectors etc. observed during PM cycle. The required parts will be provided by the purchaser.

i) SP shall carry out greasing of the parts of the respective equipments as and when required.

j) SP shall provide status report on parameters of the sub systems of the equipment. Any problem/deviations/degradations during PM to be reported and corrective actions to be carried out immediately.

B. Corrective Maintenance Services:

a) The SP has to carry out Corrective Maintenance Services as and when required upon receiving information of any fault in the equipment covered under the contract .

b) The SP shall carry out troubleshooting & replacement of faulty equipments/ parts as and when required in co-ordination with the purchaser or its designated agency. The cost of the replaced part will be borne by the purchaser.

c) The purchaser/ designated agency may lodge complaints by any available modes i.e. phone, e-mail, post. The SP shall maintain a complaint register and shall provide a complaint number for each complaint. The SP shall resolve the problem(s) within the stipulated period of ten days and shall record entries of all such activities in the complaint register. The SP shall share the copy of same with purchaser and/ or designated agency.

d) SP shall provide corrective maintenance service from 9 AM. To 7 PM. basis on working days, However during emergency conditions with a prior intimation SP will be required on 24x7 hrs basis to carry out the activities under the purview of the AMC.

e) SP shall attend any fault/breakdown within seven working days and remedial measures to be taken within ten working days after fault reporting to make the equipment fully operational.

f) Service report/Certification towards satisfactory performance after carrying out the breakdown maintenance must be duly signed by site in-charge with a copy to JD, Agriculture (QC),Durgapura ,Jaipur.

2) Project Deliverables, Milestones & Time Schedule for Laboratory Equipments

S.

No.

Project Activity/ Scope

of Work

Deliverables

(Reports/ Docs./ Infra.)

Timelines


Page 17 of 119

1.

Completion of Activity as

mentioned in section 2 (1)

(a) (b) (c)

Delivery Challan for ordered items

Installation Report and onsite training

OEM Warranty Certificates for Hardware & software items (wherever applicable)

Onsite training

T1 = T (date of issuance

of purchase order) + 10

days

2. Completion of Warranty

period in section 2 (1) (d)

Satisfactory performance report signed by OIC/Nodal Officer

T2 = T1 + 2 year

3. Completion of Non

Comprehensive Annual

Maintenance Contract

period in section 2 (1) (e)

Detailed location wise report for preventive and corrective maintenance/ management (twice in a year).

Detailed Call-logging time and Complaint redressal report (twice in a year)

Any other report as desired by the Purchaser

Satisfactory performance report signed by OIC/Nodal Officer

T3 = T2 + 5 years


Page 18 of 119

4.INSTRUCTION TO BIDDERS (ITB)

1) Bid Security

Every bidder, if not exempted, participating in the procurement process will be required to

furnish the bid security as specified in the NIB.

a) In lieu of bid security, a bid securing declaration shall be taken from Departments of the

State Government of Rajasthan, Undertakings, Corporations, Autonomous bodies,

Registered Societies and Cooperative Societies which are owned or controlled or managed

by the State Government and Government of Rajasthan Undertakings of the Central

Government.

b) Bid security instrument or cash receipt of bid security or a bid securing declaration shall

necessarily accompany the technical bid.

c) Bid security of a bidder lying with the procuring entity in respect of other bids awaiting

decision shall not be adjusted towards bid security for the fresh bids. The bid security

originally deposited may, however, be taken into consideration in case bids are re-invited.

d) The bid security may be given in the form of Cash deposit or banker’s cheque or demand

draft or bank guarantee, in specified format, of a scheduled bank or deposited through

eGRAS. The bid security must remain valid 30 days beyond the original or extended

validity period of the bid.

e) The issuer of the bid security and the confirmer, if any, of the bid security, as well as the

form and terms of the bid security, must be acceptable to the procuring entity.

f) Prior to presenting a submission, a bidder may request the procuring entity to confirm the

acceptability of proposed issuer of a bid security or of a proposed confirmer, if required.

The procuring entity shall respond promptly to such a request.

g) The bid security of unsuccessful bidders shall be refunded soon after final acceptance of

successful bid and signing of Agreement and submitting performance security.

h) The Bid security taken from a bidder shall be forfeited, including the interest, if any, in the

following cases, namely: -

a. when the bidder withdraws or modifies its bid after opening of bids;

b. when the bidder does not execute the agreement, if any, after placement of supply/

work order within the specified period;


Page 19 of 119

c. when the bidder fails to commence the supply of the goods or service or execute work

as per supply/ work order within the time specified;

d. when the bidder does not deposit the performance security within specified period after

the supply/ work order is placed; and

e. if the bidder breaches any provision of code of integrity, prescribed for bidders,

specified in the bidding document.

i) Notice will be given to the bidder with reasonable time before bid security deposited is

forfeited.

j) No interest shall be payable on the bid security.

k) In case of the successful bidder, the amount of bid security may be adjusted in arriving at

the amount of the Performance Security, or refunded if the successful bidder furnishes the

full amount of performance security.

l) The procuring entity shall promptly return the bid security after the earliest of the following

events, namely:-

a. the expiry of validity of bid security;

b. the execution of agreement for procurement and performance security is furnished by

the successful bidder;

c. the cancellation of the procurement process; or

d. the withdrawal of bid prior to the deadline for presenting bids, unless the bidding

documents stipulate that no such withdrawal is permitted.

2) Downloading of Bidding/ Tender Documents

The downloading of bidding documents shall be commenced from the date of publication of

NIB and shall be stopped one day prior to the date of opening of Bid. The complete bidding

document shall also be placed on the SPPP and e-Procurement portal. The prospective

bidders shall be permitted to download the bidding document from the websites and pay its

price while submitting the Bid to the procuring entity.

3) (i). Pre-bid Meeting/ Clarifications

a) Any prospective bidder may, in writing, seek clarifications from the procuring entity in

respect of the bidding documents as per Annexure -4 Pre-Bid Queries Format up to date and

time informed during the pre bid meeting.

b) A pre-bid conference is also scheduled by the procuring entity as per the details mentioned

in the NIB and to clarify doubts of potential bidders in respect of the procurement and the


Page 20 of 119

records of such conference shall be intimated to all bidders and where applicable, shall be

published on the respective websites.

c) The period within which the bidders may seek clarifications under (a) above and the period

within which the procuring entity shall respond to such requests for clarifications shall be as

under: -

i. Last date of submitting clarifications requests by the bidder: 14.02.2017

ii. Response to clarifications by procuring entity: 17.02.2017

3(ii) Changes in the Bidding Document

a) At any time, prior to the deadline for presenting bids, the procuring entity may for any

reason, whether on its own initiative or as a result of a request for clarification by a bidder,

modify the bidding documents by issuing an addendum in accordance with the provisions

below.

b) In case, any modification is made to the bidding document or any clarification is issued

which materially affects the terms contained in the bidding document, the procuring entity

shall publish such modification or clarification in the same manner as the publication of the

initial bidding document.

c) In case, a clarification or modification is issued to the bidding document, the procuring entity

may, prior to the last date for submission of bids, extend such time limit in order to allow the

bidders sufficient time to take into account the clarification or modification, as the case may

be, while submitting their bids.

d) Any bidder, who has submitted his bid in response to the original invitation, shall have the

opportunity to modify or re-submit it, as the case may be, within the period of time originally

allotted or such extended time as may be allowed for submission of bids, when changes are

made to the bidding document by the procuring entity:

Provided that the bid last submitted or the bid as modified by the bidder shall be

considered for evaluation.

4) Period of Validity of Bids

a) Bids submitted by the bidders shall remain valid during the period specified in the NIB/

bidding document. A bid valid for a shorter period shall be rejected by the procuring entity

as non-responsive bid.

b) Prior to the expiry of the period of validity of bids, the procuring entity, in exceptional

circumstances, may request the bidders to extend the bid validity period for an

additional specified period of time. A bidder may refuse the request and such refusal shall


Page 21 of 119

be treated as withdrawal of bid and in such circumstances bid security shall not be

forfeited.

c) Bidders that agree to an extension of the period of validity of their bids shall extend or get

extended the period of validity of bid securities submitted by them or submit new bid

securities to cover the extended period of validity of their bids. A bidder whose bid security

is not extended, or that has not submitted a new bid security, is considered to have refused

the request to extend the period of validity of its bid.

5) Format and Signing of Bids

a) Bidders must submit their bids online at e-Procurement portal i.e.

http://eproc.rajasthan.gov.in.

b) All the documents uploaded should be digitally signed with the DSC of authorized signatory

and uploaded only in PDF format with clear readability and prescribed file name as

mentioned in the table below.

c) A Single stage Two part/ cover system shall be followed for the Bid: -

a. Technical Bid, including fee details, eligibility & technical documents

b. Financial Bid

d) The technical bid shall consist of the following documents: -

S. No.

Documents Type Document Format

Fee Details 1. Bidding document Fee (Tender Fee),

RISL Processing Fee (e-Procurement), and Bid Security

Instrument/ Proof of submission

Eligibility Documents 2. Bidder’s Authorisation Certificate As per Annexure-5 and copy of PoA /

Board resolution stating that Auth. Signatory (DSC holder) can sign the bid/ contract on behalf of the firm.

3. Original Scanned Bid Document To be uploaded duly signed and stamped on each page.

4. All the documents mentioned in the “Eligibility Criteria”, in support of the eligibility

As per the format mentioned against the respective eligibility criteria clause

Technical Documents 5. Self Declaration by Bidders As per Annexure-6 6. Certificate of Conformity/No Deviation As per Annexure-7 7. Declaration by Bidders As per Annexure-8 8. Manufacturer’s Authorisation Form

(MAF) As per Annexure-9(Indicative Format)

9. Undertaking on Authenticity of Laboratory Equipments

As per Annexure-10



Page 22 of 119

10. Items Offered + Technical specifications compliance sheet for all items only on OEM’s letter-head

As per Annexure-11

b) Financial bid shall include the following documents: -

S. No.

Documents Type Document Format

1. Financial Bid – Covering Letter On bidder’s letter head duly signed by authorized signatory as per Annexure-12 (FBCOVER.PDF)

2. Financial Bid - Format As per BoQ (.XLS) format available on e-Procurement portal

The bidder should ensure that all the required documents, as mentioned in this bidding

document, are submitted along with the Bid and in the prescribed format only. Non-

submission of the required documents or submission of the documents in a different

format/ contents may lead to the rejections of the Bid submitted by the bidder.

6) Cost & Language of Bidding

a) The Bidder shall bear all costs associated with the preparation and submission of its Bid,

and the procuring entity shall not be responsible or liable for those costs, regardless of

the conduct or outcome of the bidding process.

b) The Bid, as well as all correspondence and documents relating to the Bid exchanged by

the Bidder and the procuring entity, shall be written only in English Language. Supporting

documents and printed literature that are part of the Bid may be in another language

provided they are accompanied by an accurate translation of the relevant passages in

English/ Hindi language, in which case, for purposes of interpretation of the Bid, such

translation shall govern.

7) Alternative/ Multiple Bids

Alternative/ Multiple bids shall not be considered at all.

8) Deadline for the submission of Bids

a) Bids shall be received online at e-Procurement portal and up to the time and date specified

in the NIB.

b) Normally, the date of submission and opening of bids would not be extended. In

exceptional circumstances or when the bidding document are required to be substantially

modified as a result of discussions in pre-bid meeting/ conference or otherwise and the

time with the prospective bidders for preparation of bids appears insufficient, the date may

be extended by the procuring entity. In such case the publicity of extended time and date

shall be given in the manner, as was given at the time of issuing the original NIB and shall


Page 23 of 119

also be placed on the State Public Procurement Portal, if applicable. It would be ensured

that after issue of corrigendum, reasonable time is available to the bidders for preparation

and submission of their bids. The procuring entity shall also publish such modifications in

the bidding document in the same manner as the publication of initial bidding document. If,

in the office of the bids receiving and opening authority, the last date of submission or

opening of bids is a non-working day, the bids shall be received or opened on the next

working day.

9) Withdrawal, Substitution, and Modification of Bids

a) If permitted on e-Procurement portal, a Bidder may withdraw its Bid or re-submit its Bid

(technical and/ or financial cover) as per the instructions/ procedure mentioned at e-

Procurement website under the section "Bidder's Manual Kit".

b) Bids withdrawn shall not be opened and processed further.

c) No bid shall be withdrawn, substituted, or modified after the last time and date fixed for

receipt of bids.

10) Opening of Bids

a) The Bids shall be opened by the bid opening & evaluation committee on the date and time

mentioned in the NIB in the presence of the bidders or their authorised representatives

who choose to be present.

b) The committee may co-opt experienced persons in the committee to conduct the process

of Bid opening.

c) The committee shall prepare a list of the bidders or their representatives attending the

opening of Bids and obtain their signatures on the same. The list shall also contain the

representative’s name and telephone number and corresponding bidders’ names and

addresses. The authority letters, if any, brought by the representatives shall be attached to

the list. The list shall be signed by all the members of Bid opening committee with date and

time of opening of the Bids.

d) All the documents comprising of technical Bid/ cover shall be opened & downloaded from

the e-Procurement website (only for the bidders who have submitted the prescribed fee(s)

to DoA & RISL).

e) The committee shall conduct a preliminary scrutiny of the opened technical Bids to assess

the prima-facie responsiveness and ensure that the: -

a. bid is accompanied by bidding document fee, bid security or bid securing

declaration, and processing fee (if applicable);


Page 24 of 119

b. bid is valid for the period, specified in the bidding document;

c. bid is unconditional and the bidder has agreed to give the required performance

security; and

d. other conditions, as specified in the bidding document are fulfilled.

e. any other information which the committee may consider appropriate.

f) No Bid shall be rejected at the time of Bid opening except the Bids not accompanied with

the proof of payment or instrument of the required price of bidding document, processing

fee and bid security.

g) The Financial Bid cover shall be kept unopened and shall be opened later on the date and

time intimated to the bidders who qualify in the evaluation of technical Bids.

11) Selection Method:

Lowest evaluated technically responsive bidder may be considered for award of contract.

12) Clarification of Bids

a) To assist in the examination, evaluation, comparison and qualification of the bids, the bid

evaluation committee may, at its discretion, ask any bidder for a clarification regarding its

bid. The committee’s request for clarification and the response of the bidder shall be in

writing.

b) Any clarification submitted by a bidder with regard to its bid that is not in response to a

request by the committee shall not be considered.

c) No change in the prices or substance of the bid shall be sought, offered, or permitted,

except to confirm the correction of arithmetic errors discovered by the committee in the

evaluation of the financial bids.

d) No substantive change to qualification information or to a submission, including changes

aimed at making an unqualified bidder, qualified or an unresponsive submission,

responsive shall be sought, offered or permitted.

13) Evaluation & Tabulation of Technical Bids

a) Preliminary Examination of Bids

The bid evaluation committee constituted by the bidding entity shall conduct a preliminary

scrutiny of the opened bids to assess the prima-facie responsiveness and ensure that the -

a. bid is signed, as per the requirements listed in the bidding document;

b. bid has been sealed as per instructions provided in the bidding document;

c. bid is valid for the period, specified in the bidding document;


Page 25 of 119

d. bid is accompanied by bidding document fee, bid security or bid securing

declaration, and processing fee (if applicable);

e. bid is unconditional and the bidder has agreed to give the required performance

security; and

f. other conditions, as specified in the bidding document are fulfilled.

b) Determination of Responsiveness

g. The bid evaluation committee shall determine the responsiveness of a Bid on the basis

of bidding document and the provisions of pre-qualification/ eligibility criteria of the

bidding document.

h. A responsive Bid is one that meets the requirements of the bidding document without

any material deviation, reservation, or omission where: -

i. “deviation” is a departure from the requirements specified in the bidding document;

ii. “reservation” is the setting of limiting conditions or withholding from complete

acceptance of the requirements specified in the bidding document; and

iii. “Omission” is the failure to submit part or all of the information or documentation

required in the bidding document.

i. A material deviation, reservation, or omission is one that,

i. if accepted, shall:-

1. affect in any substantial way the scope, quality, or performance of the subject

matter of procurement specified in the bidding documents; or

2. limits in any substantial way, inconsistent with the bidding documents, the

procuring entity’s rights or the bidder’s obligations under the proposed contract;

or

ii. if rectified, shall unfairly affect the competitive position of other bidders presenting

responsive Bids.

j. The bid evaluation committee shall examine the technical aspects of the Bid in

particular, to confirm that all requirements of bidding document have been met without

any material deviation, reservation or omission.


Page 26 of 119

a) The procuring entity shall regard a Bid as responsive if it conforms to all requirements set

out in the bidding document, or it contains minor deviations that do not materially alter or

depart from the characteristics, terms, conditions and other requirements set out in the

bidding document, or if it contains errors or oversights that can be corrected without

touching on the substance of the Bid.

b) Non-material Non-conformities in Bids

a. The bid evaluation committee may waive any non-conformities in the Bid that do not

constitute a material deviation, reservation or omission, the Bid shall be deemed to be

substantially responsive.

b. The bid evaluation committee may request the bidder to submit the necessary

information or document like audited statement of accounts/ CA Certificate,

Registration Certificate, VAT/ CST clearance certificate etc. within a reasonable period

of time. Failure of the bidder to comply with the request may result in the rejection of its

Bid.

c. The bid evaluation committee may rectify non-material nonconformities or omissions on

the basis of the information or documentation received from the bidder under (b)

above.

c) Technical Evaluation Criteria Bids evaluation shall be based on the documents submitted as a part of technical bid.

Technical bid shall contain all the documents as asked in the clause “Format and Signing

of Bids”

d) Tabulation of Technical Bids

a. If Technical Bids have been invited, they shall be tabulated by the bid evaluation

committee in the form of a comparative statement to evaluate the qualification of the

bidders against the criteria for qualification set out in the bidding document.

b. The members of bid evaluation committee shall give their recommendations below the

table as to which of the bidders have been found to be qualified in evaluation of

Technical Bids and sign it.

e) The number of firms qualified in technical evaluation, if less than three and it is considered

necessary by the procuring entity to continue with the procurement process, reasons shall

be recorded in writing and included in the record of the procurement proceedings.

f) The bidders who qualified in the technical evaluation shall be informed in writing about the

date, time and place of opening of their financial Bids.


Page 27 of 119

14) Evaluation & Tabulation of Financial Bids

Subject to the provisions of “Acceptance of Successful Bid and Award of Contract” below, the

procuring entity shall take following actions for evaluation of financial Bids:-

a) The financial Bids of the bidders who qualified in technical evaluation shall be opened

online at the notified time, date and place by the bid evaluation committee in the presence

of the bidders or their representatives who choose to be present;

b) the process of opening of the financial Bids shall be similar to that of technical Bids.

c) conditional Bids are liable to be rejected;

d) the evaluation shall include all costs and all taxes and duties applicable to the bidder as

per law of the Central/ State Government/ Local Authorities except VAT, and the evaluation

criteria specified in the bidding documents shall only be applied;

e) the offers shall be evaluated and marked L1, L2, L3 etc. L1 being the lowest offer and then

others in ascending order in case price is the only criteria.

f) the bid evaluation committee shall prepare a comparative statement in tabular form in

accordance with rules along with its report on evaluation of financial Bids and recommend

the lowest offer for acceptance to the procuring entity, if price is the only criterion, or most

advantageous Bid in other case;

g) The members of bids evaluation committee shall give their recommendations below the

table regarding lowest Bid or most advantageous Bid and sign it.

h) it shall be ensured that the offer recommended for sanction is justifiable looking to the

prevailing market rates of the goods, works or service required to be procured.

15) Correction of Arithmetic Errors in Financial Bids

The bid evaluation committee shall correct arithmetical errors in substantially responsive bids,

on the following basis, namely: -

a) if there is a discrepancy between the unit price and the total price that is obtained by

multiplying the unit price and quantity, the unit price shall prevail and the total price shall

be corrected, unless in the opinion of the bid evaluation committee there is an obvious

misplacement of the decimal point in the unit price, in which case the total price as quoted

shall govern and the unit price shall be corrected;

b) if there is an error in a total corresponding to the addition or subtraction of subtotals, the

subtotals shall prevail and the total shall be corrected; and


Page 28 of 119

c) if there is a discrepancy between words and figures, the amount in words shall prevail,

unless the amount expressed in words is related to an arithmetic error, in which case the

amount in figures shall prevail subject to clause (a) and (b) above.

16) Comparison of rates of firms outside and those in Rajasthan

While tabulating the financial bids of those firms which are not entitled to price preference, the

element of Rajasthan Value Added Tax (RVAT) shall be excluded from the rates quoted by the

firms of Rajasthan and the element of Central Sales Tax (CST) shall be included in the rates of

firms from outside Rajasthan for financial bid evaluation purpose.

17) Negotiations

a) Except in case of procurement by method of single source procurement or procurement by

competitive negotiations, to the extent possible, no negotiations shall be conducted after

the pre-bid stage. All clarifications needed to be sought shall be sought in the pre-bid stage

itself.

b) Negotiations maybe undertaken only with the lowest or most advantageous bidder when

the rates are considered to be much higher than the prevailing market rates.

c) The bid evaluation committee shall have full powers to undertake negotiations. Detailed

reasons and results of negotiations shall be recorded in the proceedings.

d) The lowest or most advantageous bidder shall be informed in writing either through

messenger or by registered letter and e-mail (if available). A minimum time of seven days

shall be given for calling negotiations. In case of urgency the bid evaluation committee,

after recording reasons, may reduce the time, provided the lowest or most advantageous

bidder has received the intimation and consented to regarding holding of negotiations.

e) Negotiations shall not make the original offer made by the bidder inoperative. The bid

evaluation committee shall have option to consider the original offer in case the bidder

decides to increase rates originally quoted or imposes any new terms or conditions.

f) In case of non-satisfactory achievement of rates from lowest or most advantageous bidder,

the bid evaluation committee may choose to make a written counter offer to the lowest or

most advantageous bidder and if this is not accepted by him, the committee may decide to

reject and re-invite Bids or to make the same counter-offer first to the second lowest or

most advantageous bidder, then to the third lowest or most advantageous bidder and so on

in the order of their initial standing and work/ supply order be awarded to the bidder who

accepts the counter-offer. This procedure would be used in exceptional cases only.


Page 29 of 119

g) In case the rates even after the negotiations are considered very high, fresh Bids shall be

invited.

18) Exclusion of Bids/ Disqualification

a) A procuring entity shall exclude/ disqualify a Bid, if: -

a. the information submitted, concerning the qualifications of the bidder, was false or

constituted a misrepresentation; or

b. the information submitted, concerning the qualifications of the bidder, was materially

inaccurate or incomplete; and

c. the bidder is not qualified as per pre-qualification/ eligibility criteria mentioned in the

bidding document;

d. the Bid materially departs from the requirements specified in the bidding document or it

contains false information;

e. the bidder, submitting the Bid, his agent or any one acting on his behalf, gave or

agreed to give, to any officer or employee of the procuring entity or other governmental

authority a gratification in any form, or any other thing of value, so as to unduly

influence the procurement process;

f. a bidder, in the opinion of the procuring entity, has a conflict of interest materially

affecting fair competition.

b) A Bid shall be excluded/ disqualified as soon as the cause for its exclusion/ disqualification

is discovered.

c) Every decision of a procuring entity to exclude a Bid shall be for reasons to be recorded in

writing and shall be: -

a. communicated to the concerned bidder in writing;

b. published on the State Public Procurement Portal, if applicable.

19) Lack of competition a) A situation may arise where, if after evaluation of Bids, the bid evaluation committee may

end-up with one responsive Bid only. In such situation, the bid evaluation committee would

check as to whether while floating the NIB all necessary requirements to encourage

competition like standard bid conditions, industry friendly specifications, wide publicity,

sufficient time for formulation of Bids, etc. were fulfilled. If not, the NIB would be re-floated

after rectifying deficiencies. The bid process shall be considered valid even if there is one

responsive Bid, provided that: -

a. the Bid is technically qualified;


Page 30 of 119

b. the price quoted by the bidder is assessed to be reasonable;

c. the Bid is unconditional and complete in all respects;

d. there are no obvious indicators of cartelization amongst bidders; and

e. the bidder is qualified as per the provisions of pre-qualification/ eligibility criteria in

the bidding document

b) The bid evaluation committee shall prepare a justification note for approval by the next

higher authority of the procuring entity, with the concurrence of the accounts member.

c) In case of dissent by any member of bid evaluation committee, the next higher authority in

delegation of financial powers shall decide as to whether to sanction the single Bid or re-

invite Bids after recording reasons.

d) If a decision to re-invite the Bids is taken, market assessment shall be carried out for

estimation of market depth, eligibility criteria and cost estimate.

20) Acceptance of the successful Bid and award of contract

a) The procuring entity after considering the recommendations of the bid evaluation

committee and the conditions of Bid, if any, financial implications, trials, sample testing and

test reports, etc., shall accept or reject the successful Bid. If any member of the bid

evaluation committee has disagreed or given its note of dissent, the matter shall be

referred to the next higher authority, as per delegation of financial powers, for decision.

b) Decision on Bids shall be taken within original validity period of Bids and time period

allowed to procuring entity for taking decision. If the decision is not taken within the original

validity period or time limit allowed for taking decision, the matter shall be referred to the

next higher authority in delegation of financial powers for decision.

c) Before award of the contract, the procuring entity shall ensure that the price of successful

Bid is reasonable and consistent with the required quality.

d) A Bid shall be treated as successful only after the competent authority has approved the

procurement in terms of that Bid.

e) The procuring entity shall award the contract to the bidder whose offer has been

determined to be the lowest or most advantageous in accordance with the evaluation

criteria set out in the bidding document and if the bidder has been determined to be

qualified to perform the contract satisfactorily on the basis of qualification criteria fixed for

the bidders in the bidding document for the subject matter of procurement.

f) Prior to the expiration of the period of bid validity, the procuring entity shall inform the

successful bidder, in writing, that its Bid has been accepted.


Page 31 of 119

g) As soon as a Bid is accepted by the competent authority, its written intimation shall be sent

to the concerned bidder by registered post or email and asked to execute an agreement in

the format given in the bidding documents on a non-judicial stamp of requisite value and

deposit the amount of performance security or a performance security declaration, if

applicable, within a period specified in the bidding documents or where the period is not

specified in the bidding documents then within fifteen days from the date on which the

letter of acceptance or letter of intent is dispatched to the bidder.

h) If the issuance of formal letter of acceptance is likely to take time, in the meanwhile a Letter

of Intent (LOI) may be sent to the bidder. The acceptance of an offer is complete as soon

as the letter of acceptance or letter of intent is posted and/ or sent by email (if available) to

the address of the bidder given in the bidding document. Until a formal contract is

executed, the letter of acceptance or LOI shall constitute a binding contract.

i) The bid security of the bidders who’s Bids could not be accepted shall be refunded soon

after the contract with the successful bidder is signed and its performance security is

obtained.

21) Information and publication of award

Information of award of contract shall be communicated to all participating bidders and

published on the respective website(s) as specified in NIB.

22) Procuring entity’s right to accept or reject any or all Bids

The Procuring entity reserves the right to accept or reject any Bid, and to annul (cancel) the

bidding process and reject all Bids at any time prior to award of contract, without thereby

incurring any liability to the bidders.

23) Right to vary quantity

a) If the procuring entity does not procure any subject matter of procurement or procures less

than the quantity specified in the bidding documents due to change in circumstances,

the bidder shall not be entitled for any claim or compensation.

b) Repeat orders for extra items or additional quantities may be placed on the rates and

conditions given in the contract (if the original order was given after inviting open

competitive Bids). Delivery or completion period may also be proportionately increased.

24) Performance Security

a. Prior to execution of agreement, Performance security shall be solicited from all successful

bidders except the departments of the State Government and undertakings, corporations,

autonomous bodies, registered societies, co-operative societies which are owned or


Page 32 of 119

controlled or managed by the State Government and undertakings of the Central

Government. However, a performance security declaration shall be taken from them. The

State Government may relax the provision of performance security in particular

procurement or any class of procurement.

b. The amount of performance security shall be 5% of the amount of offered value/supply

order. In case of small scale industry of Rajasthan it shall be 1% of the amount of quantity

of the offered value/supply order and in case of sick industry other than the small scale

industry whose cases are pending before the board of Industrial and Financial

Reconstruction it shall be 2 % of the amount of the offered value/supply order.

c. Performance security shall be furnished in any one of the following forms: -

i. deposit though e-GRAS;

ii. Bank Draft or Banker's Cheque of a scheduled bank;

iii. National Savings Certificates and any other script/ instrument under

National Savings Schemes for promotion of small savings issued by a Post Office

in Rajasthan, if the same can be pledged under the relevant rules. They shall be

accepted at their surrender value at the time of bid and formally transferred in the

name of procuring entity with the approval of Head Post Master;

iv. Bank guarantee/s of a scheduled bank. It shall be got verified from the issuing

bank. Other conditions regarding bank guarantee shall be same as mentioned in

the bidding document for bid security;

v. Fixed Deposit Receipt (FDR) of a scheduled bank. It shall be in the name of

procuring entity on account of bidder and discharged by the bidder in advance.

The procuring entity shall ensure before accepting the FDR that the bidder

furnishes an undertaking from the bank to make payment/premature payment of

the FDR on demand to the procuring entity without requirement of consent of the

bidder concerned. In the event of forfeiture of the performance security, the Fixed

Deposit shall be forfeited along with interest earned on such Fixed Deposit.

d. Performance security furnished in the form specified in clause [II] to [V] of (c) above shall

remain valid for a period of 60 days beyond the date of completion of all contractual

obligations of the bidder, including warranty obligations and maintenance and defect

liability period. Performance security will be returned after the successful completion of

warranty period and satisfactory performance report signed by OIC/nodal officer.

e. Forfeiture of Security Deposit: Security amount in full or part may be forfeited, including interest, if any, in the following cases:-

1. When any terms and condition of the contract is breached.


Page 33 of 119

2. When the bidder fails to make complete supply satisfactorily.

3. if the bidder breaches any provision of code of integrity, prescribed for bidders, specified in the bidding document.

4. If the bidder fails to provide satisfactory warranty

f. Notice will be given to the bidder with reasonable time before PSD deposited is forfeited.

g. No interest shall be payable on the PSD.

h. Performance security will be refund after 3 month of satisfactory compilation of warranty period.

25) Execution of agreement

a) A procurement contract shall come into force from the date on which the letter of

acceptance or letter of intent is despatched to the bidder.

b) The successful bidder shall sign the procurement contract within 5 days from the date on

which the letter of acceptance or letter of intent is despatched to the successful bidder.

c) If the bidder, who’s Bid has been accepted, fails to sign a written procurement contract or

fails to furnish the required performance security within specified period, the procuring

entity shall take action against the successful bidder as per the provisions of the bidding

document and Act. The procuring entity may, in such case, cancel the procurement

process or if it deems fit, offer for acceptance the rates of lowest or most advantageous

bidder to the next lowest or most advantageous bidder, in accordance with the criteria and

procedures set out in the bidding document.

d) The bidder will be required to execute the agreement on a non-judicial stamp of specified

value at its cost to be purchased from anywhere in Rajasthan only.

26) Confidentiality

a) Notwithstanding anything contained in this bidding document but subject to the provisions

of any other law for the time being in force providing for disclosure of information, a

procuring entity shall not disclose any information if such disclosure, in its opinion, is likely

to: -

a. impede enforcement of any law;

b. affect the security or strategic interests of India;

c. affect the intellectual property rights or legitimate commercial interests of bidders;

d. affect the legitimate commercial interests of the procuring entity in situations that

may include when the procurement relates to a project in which the procuring entity

is to make a competitive bid, or the intellectual property rights of the procuring

entity.


Page 34 of 119

b) The procuring entity shall treat all communications with bidders related to the procurement

process in such manner as to avoid their disclosure to competing bidders or to any other

person not authorised to have access to such information.

c) The procuring entity may impose on bidders and sub-contractors, if there are any for

fulfilling the terms of the procurement contract, conditions aimed at protecting information,

the disclosure of which violates (a) above.

d) In addition to the restrictions specified above, the procuring entity, while procuring a

subject matter of such nature which requires the procuring entity to maintain confidentiality,

may impose condition for protecting confidentiality of such information.

27) Cancellation of procurement process

a) If any procurement process has been cancelled, it shall not be reopened but it shall not

prevent the procuring entity from initiating a new procurement process for the same subject

matter of procurement, if required.

b) A procuring entity may, for reasons to be recorded in writing, cancel the process of

procurement initiated by it -

a. at any time prior to the acceptance of the successful Bid; or

b. after the successful Bid is accepted in accordance with (d) and (e) below.

c) The procuring entity shall not open any bids or proposals after taking a decision to cancel

the procurement and shall return such unopened bids or proposals.

d) The decision of the procuring entity to cancel the procurement and reasons for such

decision shall be immediately communicated to all bidders that participated in the

procurement process.

e) If the bidder who’s Bid has been accepted as successful fails to sign any written

procurement contract as required, or fails to provide any required security for the

performance of the contract, the procuring entity may cancel the procurement process.

f) If a bidder is convicted of any offence under the Act, the procuring entity may: -

a. cancel the relevant procurement process if the Bid of the convicted bidder has been

declared as successful but no procurement contract has been entered into;

b. rescind (cancel) the relevant contract or forfeit the payment of all or a part of the

contract value if the procurement contract has been entered into between the procuring

entity and the convicted bidder.


Page 35 of 119

28) Code of Integrity for Bidders

a) No person participating in a procurement process shall act in contravention of the code of

integrity prescribed by the State Government.

b) The code of integrity include provisions for: -

a. Prohibiting

i. any offer, solicitation or acceptance of any bribe, reward or gift or any material

benefit, either directly or indirectly, in exchange for an unfair advantage in the

procurement process or to otherwise influence the procurement process;

ii. any omission, including a misrepresentation that misleads or attempts to mislead

so as to obtain a financial or other benefit or avoid an obligation;

iii. any collusion, bid rigging or anti-competitive behaviour to impair the transparency,

fairness and progress of the procurement process;

iv. improper use of information shared between the procuring entity and the bidders

with an intent to gain unfair advantage in the procurement process or for personal

gain;

v. any financial or business transactions between the bidder and any officer or

employee of the procuring entity;

vi. any coercion including impairing or harming or threatening to do the same, directly

or indirectly, to any party or to its property to influence the procurement process;

vii. any obstruction of any investigation or audit of a procurement process;

b. disclosure of conflict of interest;

c. disclosure by the bidder of any previous transgressions with any entity in India or any

other country during the last three years or of any debarment by any other procuring

entity.

c) Without prejudice to the provisions below, in case of any breach of the code of integrity by

a bidder or prospective bidder, as the case may be, the procuring entity may take

appropriate measures including: -

a. exclusion of the bidder from the procurement process; b. calling-off of pre-contract negotiations and forfeiture or encashment of bid security;

c. forfeiture or encashment of any other security or bond relating to the procurement;

d. recovery of payments made by the procuring entity along with interest thereon at

bank rate;

e. cancellation of the relevant contract and recovery of compensation for loss incurred

by the procuring entity;

f. debarment of the bidder from participation in future procurements of the procuring

entity for a period not exceeding three years.


Page 36 of 119

29) Conflict of Interest

A Bidder may be considered to be in conflict of interest with one or more parties in a bidding

process if, including but not limited to:-

a) they have controlling partners in common;

b) they receive or have received any direct or indirect subsidy from any of them;

c) they have the same legal representative for purposes of the bid;

d) they have a relationship with each other, directly or through common third parties,

that puts them in a position to have access to information about or influence on the

bid of another;

e) A bidder participates in more than one bid in the same bidding process. However,

this does not limit the inclusion of the same sub-contractor, not otherwise

participating as a bidder, in more than one bid; or

f) A bidder or any of its affiliates participated as a consultant in the preparation of the

design or technical specifications of the subject matter of procurement of the

bidding process. All bidders shall provide in Eligibility Criteria documents, a

statement that the bidder is neither associated nor has been associated directly or

indirectly, with the consultant or anyother entity that has prepared the

design, specifications and other documents for the subject matter of procurement or

being proposed as Project Manager for the contract.

30) Interference with Procurement Process

A bidder, who: -

a) withdraws from the procurement process after opening of financial bids;

b) withdraws from the procurement process after being declared the successful

bidder;

c) fails to enter into procurement contract after being declared the successful bidder;

d) fails to provide performance security or any other document or security required in

terms of the bidding documents after being declared the successful bidder,

without valid grounds,

shall, in addition to the recourse available in the bidding document or

the contract, be punished with fine which may extend to fifty lakh rupees or ten

per cent of the assessed value of procurement, whichever is less.

31) Appeals a) Subject to “Appeal not to lie in certain cases” below, if any bidder or prospective bidder is

aggrieved that any decision, action or omission of the procuring entity is in

contravention to the provisions of the Act or the rules or guidelines issued thereunder, he

may file an appeal to such officer of the procuring entity, as may be designated by it for the


Page 37 of 119

purpose, within a period of 10 days from the date of such decision or action, omission, as

the case may be, clearly giving the specific ground or grounds on which he feels

aggrieved:

a. Provided that after the declaration of a bidder as successful in terms of “Award of

Contract”, the appeal may be filed only by a bidder who has participated in

procurement proceedings:

b. Provided further that in case a procuring entity evaluates the technical Bid before

the opening of the financial Bid, an appeal related to the matter of financial Bid may

be filed only by a bidder whose technical Bid is found to be acceptable.

b) The officer to whom an appeal is filed under (a) above shall deal with the appeal as

expeditiously as possible and shall endeavour to dispose it of within 30 days from the date

of filing of the appeal.

c) If the officer designated under (a) above fails to dispose of the appeal filed under that sub-

section within the period specified in (b) above, or if the bidder or prospective bidder or the

procuring entity is aggrieved by the order passed, the bidder or prospective bidder or the

procuring entity, as the case may be, may file a second appeal to an officer or authority

designated by the State Government in this behalf within 15 days from the expiry of the

period specified in (b) above or of the date of receipt of the order passed under (b) above,

as the case may be.

d) The officer or authority to which an appeal is filed under (c) above shall deal with the

appeal as expeditiously as possible and shall endeavour to dispose it of within 30 days

from the date of filing of the appeal:

e) The officer or authority to which an appeal may be filed under (a) or (d) above shall be :

First Appellate Authority: Director of Agriculture, Pant Krishi Bhawan, Jaipur

Second Appellate Authority: Principal Secretary, Department of Agriculture, GoR

f) Form of Appeal:

a. Every appeal under (a) and (c) above shall be as per Annexure-14 along with as

many copies as there are respondents in the appeal.

b. Every appeal shall be accompanied by an order appealed against, if any, affidavit

verifying the facts stated in the appeal and proof of payment of fee.

c. Every appeal may be presented to First Appellate Authority or Second Appellate

Authority, as the case may be, in person or through registered post or authorised

representative.


Page 38 of 119

g) Fee for Appeal: Fee for filing appeal:

a. Fee for first appeal shall be rupees two thousand five hundred and for second

appeal shall be rupees ten thousand, which shall be non-refundable.

b. The fee shall be paid in the form of bank demand draft or banker’s cheque of a

Scheduled Bank payable in the name of Appellate Authority concerned.

h) Procedure for disposal of appeal:

a. The First Appellate Authority or Second Appellate Authority, as the case may be,

upon filing of appeal, shall issue notice accompanied by copy of appeal, affidavit

and documents, if any, to the respondents and fix date of hearing.

b. On the date fixed for hearing, the First Appellate Authority or Second Appellate

Authority, as the case may be, shall,-

i. hear all the parties to appeal present before him; and

ii. peruse or inspect documents, relevant records or copies thereof relating to

the matter.

c. After hearing the parties, perusal or inspection of documents and relevant records

or copies thereof relating to the matter, the Appellate Authority concerned shall

pass an order in writing and provide the copy of order to the parties to appeal free

of cost.

d. The order passed under (c) shall also be placed on the State Public Procurement

Portal.

i) No information which would impair the protection of essential security interests of India, or

impede the enforcement of law or fair competition, or prejudice the legitimate commercial

interests of the bidder or the procuring entity, shall be disclosed in a proceeding under an

appeal.

32) Stay of procurement proceedings

While hearing of an appeal, the officer or authority hearing the appeal may, on an application

made in this behalf and after affording a reasonable opportunity of hearing to the parties

concerned, stay the procurement proceedings pending disposal of the appeal, if he, or it, is

satisfied that failure to do so is likely to lead to miscarriage of justice.

33) Vexatious Appeals & Complaints

Whoever intentionally files any vexatious, frivolous or malicious appeal or complaint under the

“The Rajasthan Transparency Public Procurement Act 2012”, with the intention of delaying or

defeating any procurement or causing loss to any procuring entity or any other bidder, shall be

punished with fine which may extend to twenty lakh rupees or five per cent of the value of

procurement, whichever is less.


Page 39 of 119

34) Offenses by Firms/ Companies

a) Where an offence under “The Rajasthan Transparency Public Procurement Act 2012” has

been committed by a company, every person who at the time the offence was committed was

in charge of and was responsible to the company for the conduct of the business of the

company, as well as the company, shall be deemed to be guilty of having committed the

offence and shall be liable to be proceeded against and punished accordingly:

Provided that nothing contained in this sub-section shall render any such person liable for

any punishment if he proves that the offence was committed without his knowledge or that he

had exercised all due diligence to prevent the commission of such offence.

b) Notwithstanding anything contained in (a) above, where an offence under this Act has been

committed by a company and it is proved that the offence has been committed with the

consent or connivance of or is attributable to any neglect on the part of any director,

manager, secretary or other officer of the company, such director, manager, secretary or

other officer shall also be deemed to be guilty of having committed such offence and shall be

liable to be proceeded against and punished accordingly.

c) For the purpose of this section-

a. "company" means a body corporate and includes a limited liability partnership, firm,

registered society or cooperative society, trust or other association of individuals;

and

b. "director" in relation to a limited liability partnership or firm, means a partner in the

firm.

d) Abetment of certain offenses: Whoever abets an offence punishable under this Act, whether

or not that offence is committed in consequence of that abetment, shall be punished with the

punishment provided for the offence.

35) Debarment from Bidding

a) A bidder shall be debarred by the State Government if he has been convicted of an offence

a. under the Prevention of Corruption Act, 1988 (Central Act No. 49 of 1988); or

b. under the Indian Penal Code, 1860 (Central Act No. 45 of 1860) or any other law for

the time being in force, for causing any loss of life or property or causing a threat to

public health as part of execution of a public procurement contract.

b) A bidder debarred under (a) above shall not be eligible to participate in a procurement

process of any procuring entity for a period not exceeding three years commencing from the

date on which he was debarred.


Page 40 of 119

c) If a procuring entity finds that a bidder has breached the code of integrity prescribed in terms

of “Code of Integrity for bidders” above, it may debar the bidder for a period not exceeding

three years.

d) Where the entire bid security or the entire performance security or any substitute thereof, as

the case may be, of a bidder has been forfeited by a procuring entity in respect of any

procurement process or procurement contract, the bidder may be debarred from participating

in any procurement process undertaken by the procuring entity for a period not exceeding

three years.

e) The State Government or a procuring entity, as the case may be, shall not debar a bidder

under this section unless such bidder has been given a reasonable opportunity of being

heard.

36) Monitoring of Contract

a) An officer or a committee of officers named Contract Monitoring Committee (CMC) may be

nominated by procuring entity to monitor the progress of the contract during its delivery

period.

b) During the delivery period the CMC shall keep a watch on the progress of the contract and

shall ensure that quantity of goods and service delivery is in proportion to the total delivery

period given, if it is a severable contract, in which the delivery of the goods and service is to

be obtained continuously or is batched. If the entire quantity of goods and service is to be

delivered in the form of completed work or entire contract like fabrication work, the process of

completion of work may be watched and inspections of the selected bidder’s premises where

the work is being completed may be inspected.

c) If delay in delivery of goods and service is observed a performance notice would be given to

the selected bidder to speed up the delivery.

d) Any change in the constitution of the firm, etc. shall be notified forth with by the contractor in

writing to the procuring entity and such change shall not relieve any former member of the

firm, etc., from any liability under the contract.

e) No new partner/ partners shall be accepted in the firm by the selected bidder in respect of the

contract unless he/ they agree to abide by all its terms, conditions and deposits with the

procuring entity through a written agreement to this effect. The bidder’s receipt for

acknowledgement or that of any partners subsequently accepted as above shall bind all

of them and will be sufficient discharge for any of the purpose of the contract.

f) The selected bidder shall not assign or sub-let his contract or any substantial part thereof

to any other agency without the permission of procuring entity.


Page 41 of 119

5.GENERALTERMS AND CONDITIONS OF TENDER &CONTRACT

Bidders should read these conditions carefully and comply strictly while sending their bids.

Definitions

For the purpose of clarity, the following words and expressions shall have the meanings hereby

assigned to them: -

a) “Contract” means the Agreement entered into between the Purchaser and the successful/

selected bidder, together with the Contract Documents referred to therein, including all

attachments, appendices, and all documents incorporated by reference therein.

b) “Contract Documents” means the documents listed in the Agreement, including any

amendments thereto.

c) “Contract Price” means the price payable to the successful/ selected bidder as specified in the

Agreement, subject to such additions and adjustments thereto or deductions there from, as

may be made pursuant to the Contract.

d) “Day” means a calendar day.

e) “Delivery” means the transfer of the Goods from the successful/ selected bidder to the

Purchaser in accordance with the terms and conditions set forth in the Contract.

f) “Completion” means the fulfilment of the related services by the successful/ selected bidder in

accordance with the terms and conditions set forth in the Contract.

g) “Goods” means all of the commodities, raw material, machinery and equipment, and/or other

materials that the successful/ selected bidder is required to supply to the Purchaser under the

Contract.

h) “Purchaser” means the entity purchasing the Goods and related services, as specified in the

bidding document.

i) “Related Services” means the services incidental to the supply of the goods, such as

insurance, installation, training and initial maintenance and other similar obligations of the

successful/ selected bidder under the Contract.

j) “Subcontractor” means any natural person, private or government entity, or a combination of

the above, including its legal successors or permitted assigns, to whom any part of the Goods

to be supplied or execution of any part of the related services is subcontracted by the

successful/ selected bidder.


Page 42 of 119

k) “Supplier/ Successful or Selected bidder” means the person, private or government entity, or a

combination of the above, whose Bid to perform the Contract has been accepted by the

Purchaser and is named as such in the Agreement, and includes the legal successors or

permitted assigns of the successful/ selected bidder.

l) “The Site,” where applicable, means the designated project place(s) named in the bidding

document.

Note: The bidder shall be deemed to have carefully examined the conditions, specifications,

size, make and drawings, etc., of the goods to be supplied and related services to be

rendered. If the bidder has any doubts as to the meaning of any portion of these

conditions or of the specification, drawing, etc., he shall, before submitting the Bid and

signing the contract refer the same to the procuring entity and get clarifications.

1) Contract Documents

Subject to the order of precedence set forth in the Agreement, all documents forming the

Contract (and all parts thereof) are intended to be correlative, complementary, and mutually

explanatory.

2) Interpretation

a) If the context so requires it, singular means plural and vice versa.

b) Entire Agreement: The Contract constitutes the entire agreement between the Purchaser

and the Supplier/ Selected Bidder and supersedes all communications, negotiations and

agreements (whether written or oral) of parties with respect thereto made prior to the

date of Contract.

c) Amendment: No amendment or other variation of the Contract shall be valid unless it is

in writing, is dated, expressly refers to the Contract, and is signed by a duly authorized

representative of each party thereto.

d) Non-waiver: Subject to the condition (f) below, no relaxation, forbearance, delay, or

indulgence by either party in enforcing any of the terms and conditions of the Contract or

the granting of time by either party to the other shall prejudice, affect, or restrict the rights

of that party under the Contract, neither shall any waiver by either party of any breach of

Contract operate as waiver of any subsequent or continuing breach of Contract.

e) Any waiver of a party’s rights, powers, or remedies under the Contract must be in writing,

dated, and signed by an authorized representative of the party granting such waiver, and

must specify the right and the extent to which it is being waived.

f) Severability: If any provision or condition of the Contract is prohibited or rendered invalid

or unenforceable, such prohibition, invalidity or unenforceability shall not affect the

validity or enforceability of any other provisions and conditions of the Contract.


Page 43 of 119

3) Language

a) The Contract as well as all correspondence and documents relating to the Contract

exchanged by the successful/ selected bidder and the Purchaser, shall be written in

English language only. Supporting documents and printed literature that are part of the

Contract may be in another language provided they are accompanied by an accurate

translation of the relevant passages in the language specified in the special conditions of

the contract, in which case, for purposes of interpretation of the Contract, this translation

shall govern.

b) The successful/ selected bidder shall bear all costs of translation to the governing

language and all risks of the accuracy of such translation.

4) Joint Venture, Consortium or Association

Joint Venture, Consortium or Association is not allowed for the bid.

5) Eligible Goods and Related Services

a) For purposes of this Clause, the term “goods” includes commodities, raw material,

machinery, equipment, and industrial plants; and “related services” includes services

such as insurance, transportation & supply.

6) Service of Notice, Documents & Orders

a) A notice, document or order shall be deemed to be served on any individual by -

a. delivering it to the person personally; or

b. leaving it at, or sending it by post to, the address of the place of residence

or business of the person last known;

c. on a body corporate by leaving it at, or sending it by post to, the registered office of

the body corporate.

b) When the procedure laid down in (a) above is followed, service shall be deemed to be

effected by properly addressing, preparing and posting the document, notice or order, as

the case may be.

7) Scope of Supply

a) Subject to the provisions in the bidding document and contract, the goods and related

services to be supplied shall be as specified in the bidding document.

b) Unless otherwise stipulated in the contract, the scope of supply shall include Laboratory

Equipment not specifically mentioned in the contract but that can be reasonably inferred

from the Contract as being required for attaining delivery and completion of the goods

and related services as if such items were expressly mentioned in the contract.


Page 44 of 119

8) Delivery

a) Subject to the conditions of the contract, the delivery of the goods shall be in accordance

with the delivery period specified in the bidding document. The details of supply/ shipping

and other documents to be furnished by the successful/ selected bidder are specified in

the bidding document and/ or contract.

b) The contract for the supply can be repudiated at any time by the purchase officer, if the

supplies are not made to his satisfaction after giving an opportunity to the bidder of being

heard and recording the reasons for repudiation.

c) The Supplier/ Selected Bidder shall arrange to supply the ordered materials as per

specifications within the specified delivery/ completion.

d) The bidder shall also be responsible to ensure adequate regular supply of spare parts

needed for a specific type of machinery and equipment.

e) Extent of quantity – Repeat orders : If the orders are placed in excess of the quantities

shown in bid notice, the bidder shall be bound to meet the required supply. Repeat

orders may also be placed on the rate and conditions given in the bid provided that the

repeat orders are up to 50% of the quantity originally purchased and the period is not

more than one month from the date of expiry of last supply. If the bidder fails to do so,

the Purchase Officer shall be free to arrange for the balance supply by limited tender or

otherwise and the extra cost incurred shall be recoverable from the bidder.

f) If the Purchase Officer does not purchase any of the NIB articles or purchases less than

the quantity indicated in the bid notice, the bidder shall not be entitled to claim any

compensation.

9) Supplier’s/ Selected Bidder’s Responsibilities

The Supplier/ Selected Bidder shall supply all the goods and maintenance during the

warranty period included in the scope of supply in accordance with the provisions of bidding

document and/ or contract.

10) Purchaser’s Responsibilities

a) Whenever the supply of equipments and related services requires that the Supplier/

Selected Bidder obtain permits, approvals, and import and other licenses from local

public authorities, the Purchaser shall, if so required by the Supplier/ Selected Bidder,

make its best effort to assist the Supplier/ Selected Bidder in complying with such

requirements in a timely and expeditious manner.

b) The Purchaser shall pay all costs involved in the performance of its responsibilities, in

accordance with the general and special conditions of the contract.


Page 45 of 119

11) Contract Price

a) The Contract Price shall be paid as specified in the contract or deductions there from, as

may be made pursuant to the Contract.

b) Prices charged by the Supplier/ Selected Bidder for the Goods delivered and the Related

Services performed under the Contract shall not vary from the prices quoted by the

Supplier/ Selected Bidder in its bid.

12) Recoveries from Supplier/ Selected Bidder

a) Recoveries of liquidated damages, short supply, breakage, rejected articles shall

ordinary be made from bills.

b) Amount may also be withheld to the extent of short supply, breakages, and rejected

articles and in case of failure in satisfactory replacement by the supplier along with

amount of liquidated damages shall be recovered from his dues and security deposit

available with the department.

c) In case, recovery is not possible recourse will be taken under Rajasthan PDR Act or any

other law in force.

13) Taxes & Duties

a) The TDS, Raj-VAT, Service Tax etc., if applicable, shall be deducted at source/ paid by

Department of Agriculture as per prevailing rates.

b) For goods supplied from outside India, the successful/ selected bidder shall be entirely

responsible for all taxes, stamp duties, license fees, and other such levies imposed

outside the country.

c) For goods supplied from within India, the successful/ selected bidder shall be entirely

responsible for all taxes, duties, license fees, etc., incurred until delivery of the

contracted Goods to the Purchaser.

d) If any tax exemptions, reductions, allowances or privileges may be available to the

successful/ selected bidder in India, the Purchaser shall use its best efforts to enable the

successful/ selected bidder to benefit from any such tax savings to the maximum

allowable extent.


Page 46 of 119

14) Confidential Information

a) The Purchaser and the Supplier/ Selected Bidder shall keep confidential and shall not,

without the written consent of the other party hereto, divulge to any third party any

drawings, documents, data, or other information furnished directly or indirectly by the

other party hereto in connection with the Contract, whether such information has been

furnished prior to, during or following completion or termination of the Contract.

b) The Supplier/ Selected Bidder may furnish to its Subcontractor, if permitted, such

documents, data, and other information it receives from the Purchaser to the extent

required for the Subcontractor to perform its work under the Contract, in which event the

Supplier/ Selected Bidder shall obtain from such Subcontractor an undertaking of

confidentiality similar to that imposed on the Supplier/ Selected Bidder.

c) The Purchaser shall not use such documents, data, and other information received from

the Supplier/ Selected Bidder for any purposes unrelated to the Contract. Similarly, the

Supplier/ Selected Bidder shall not use such documents, data, and other information

received from the Purchaser for any purpose other than the design, procurement, or

other work and services required for the performance of the Contract.

d) The obligation of a party under sub-clauses above, however, shall not apply to

information that: -

i. the Purchaser or Supplier/ Selected Bidder need to share with other institutions

participating in the Contract;

ii. now or hereafter enters the public domain through no fault of that party;

iii. can be proven to have been possessed by that party at the time of disclosure and

which was not previously obtained, directly or indirectly, from the other party; or

iv. otherwise lawfully becomes available to that party from a third party that has no

obligation of confidentiality.

e) The above provisions shall not in any way modify any undertaking of confidentiality given

by either of the parties hereto prior to the date of the Contract in respect of the supply or

any part thereof.

f) The provisions of this clause shall survive completion or termination, for whatever

reason, of the Contract.


Page 47 of 119

15) Specifications and Standards

a) All articles supplied shall strictly conform to the specifications, trademark laid down in the

bidding document and wherever articles have been required according to ISI/ ISO/ other

applicable specifications/ certifications/ standards, those articles should conform strictly

to those specifications/ certifications/ standards. The supply shall be of best quality and

description. The decision of the competent authority/ purchase committee whether the

articles supplied conform to the specifications shall be final and binding on the supplier/

selected bidder.

b) Technical Specifications and Drawings

i. The Supplier/ Selected Bidder shall ensure that the goods and related services

comply with the technical specifications and other provisions of the Contract.

ii. The Supplier/ Selected Bidder shall be entitled to disclaim responsibility for any

design, data, drawing, specification or other document, or any modification thereof

provided or designed by or on behalf of the Purchaser, by giving a notice of such

disclaimer to the Purchaser.

iii. The goods and related services supplied under this Contract shall conform to the

standards mentioned in bidding document and, when no applicable standard is

mentioned, the standard shall be equivalent or superior to the official standards

whose application is appropriate to the country of origin of the Goods.

c) Wherever references are made in the Contract to codes and standards in accordance

with which it shall be executed, the edition or the revised version of such codes and

standards shall be those specified in the bidding document. During Contract execution,

any changes in any such codes and standards shall be applied only after approval by the

Purchaser and shall be treated in accordance with the general conditions of the contract.

16) Packing and Documents

a) The Supplier/ Selected Bidder shall provide such packing of the Goods as is required to

prevent their damage or deterioration during transit to their final destination, as indicated

in the Contract. During transit, the packing shall be sufficient to withstand, without

limitation, rough handling and exposure to extreme temperatures, salt and precipitation,

and open storage. Packing case size and weights shall take into consideration, where

appropriate, the remoteness of the final destination of the Goods and the absence of

heavy handling facilities at all points in transit.

b) The packing, marking, and documentation within and outside the packages shall comply

strictly with such special requirements as shall be expressly provided for in the Contract,

including additional requirements, if any, specified in the contract, and in any other

instructions ordered by the Purchaser.


Page 48 of 119

17) Insurance

a) The goods will be delivered at the destination go-down in perfect condition. The Goods

supplied under the Contract shall be fully insured against loss by theft, destruction or

damage incidental to manufacture or acquisition, transportation, storage, fire, flood,

under exposure to weather and delivery at the designated project locations, in

accordance with the applicable terms. The insurance charges will be borne by the

supplier and Purchaser will not be required to pay such charges if incurred.

b) The goods will be delivered at the FOR destination in perfect condition.

18) Transportation

The supplier/ selected bidder shall be responsible for transport by sea, rail and road or air

and delivery of the material in the good condition to the consignee at destination. In the

event of any loss, damage, breakage or leakage or any shortage the bidder shall be liable to

make good such loss and shortage found at the checking/ inspection of the material by the

consignee. No extra cost on such account shall be admissible.

19) Inspection

a) As soon as the goods arrive at the designated place for supply, an inspection Committee

constituted by The procuring entity shall inspect the material for its conformity with

technical specification mentioned.

b) The Purchase Officer or his duly authorized representative shall at all reasonable time

have access to the suppliers premises and shall have the power at all reasonable time to

inspect and examine the materials and workmanship of the goods/equipment/ machineries

during manufacturing process or afterwards as may be decided.

c) The bidder shall furnish complete address of the premises of his office, go-down and

workshop where inspection can be made together with name and address of the person

who is to be contacted for the purpose. In case of those dealers who have newly entered

in business, a letter of introduction from their bankers will be necessary.

d) Supplies when received shall be subject to inspection to ensure whether they conform to

the specifications. Inspection will be conducted by a committee constituted by the

Purchase Officer.

e) After successful inspection, it will be supplier’s/ selected bidder’s responsibility to dispatch

the equipment at respective locations without any financial liability to the Purchaser.

However, supplies when received at respective locations shall be subject to inspection to

ensure whether they conform to the specification.


Page 49 of 119

20) Testing charges

Testing charges shall be borne by the Government. In case of test results showing that

supplies are not up to the prescribed standards or specifications, the testing charges shall be

payable by the selected bidder.

21) Rejection

a) Articles not approved during inspection or testing shall be rejected and will have to be

replaced by the selected bidder at his own cost within the time fixed by the Purchase

Officer.

b) If, however, due to exigencies of DoA work, such replacement either in whole or in part,

is not considered feasible, the Purchase Officer after giving an opportunity to the

selected bidder of being heard shall for reasons to be recorded, deduct a suitable

amount from the approved rates. The deduction so made shall be final.

c) The rejected articles shall be removed by the supplier/ bidder/ selected bidder within 15

days of intimation of rejection, after which Purchase Officer shall not be responsible for

any loss, shortage or damage and shall have the right to dispose of such articles as he

thinks fit, at the selected bidder’s risk and on his account.

22) Payments

a) Unless otherwise agreed between the parties, payment for the delivery of the items will

be made on submission of bill in proper form by the bidder to the procurement entity in

accordance with G.F.& A.R all remittance charges will be borne by the bidder.

b) In case of disputed items, 10% to 25% of the bill amount shall be withheld and will be

paid on settlement of the dispute.

c) The bill/invoice (In Triplicate) shall be submitted to procurement entity along with service

report/Certificate duly signed by site coordinator /Authority.

d) No advance will be made under any circumstances.

23) Liquidated Damages (LD)

a) In case of extension in the delivery period with liquidated damages the recovery shall be

made on the basis of following percentages of value of Stores with the bidder has failed

to supply complete:-

delay up to one fourth period of the prescribed delivery period: 2.5%

delay exceeding one fourth but not exceeding half of the prescribed period: 5.0%

delay exceeding half but not exceeding three fourth of the prescribed period: 7.5%

delay exceeding three fourth of the prescribed period: 10%


Page 50 of 119

b) Fraction of a day in reckoning period of delay in supplies shall be eliminated if it is less

than half a day.

c) The maximum amount of liquidated damages shall be 10% of the contract value.

d) If the supplier requires an extension of time in completion of contractual supply on

account of occurrence of any hindrance, he shall apply in writing to the authority, which

has placed the supply order, for the same immediately on occurrence of the hindrance

but not after the stipulated date of completion of supply.

e) Delivery period may be extended with or without liquidated damages if the delay in the

supply of goods is on account of hindrances beyond the control of the bidder.

24) Bidders must make their own arrangements to obtain import licence, if necessary. If a bidder

imposes conditions which are in addition to or in conflict with the conditions mentioned herein,

his bid is liable to summary rejection. In any case none of such conditions will be deemed to

have been accepted unless specifically mentioned in the letter of acceptance of bid issued by

the Purchase Officer.

25) Settlement of Disputes:

All disputes pertaining to the Contract shall be decided as per the provision of Arbitration &

Conciliation act, 1996.

26) All legal proceedings, if necessary arise to institute may by any of the parties (Government

or Contractor) shall have to be lodged in courts situated in Jaipur (Rajasthan) and not

elsewhere.

27) Authenticity of Equipment

a) The selected bidder shall certify (as per Annexure-9) that the supplied goods are brand

new, genuine/ authentic, not refurbished, conform to the description and quality as

specified in this bidding document and are free from defects in material, workmanship

and service.

b) If during the contract period, the said goods be discovered counterfeit/ unauthentic or not

to conform to the description and quality aforesaid or have determined (and the decision

of the Purchase Officer in that behalf will be final and conclusive), notwithstanding the

fact that the purchaser may have inspected and/ or approved the said goods, the

purchaser will be entitled to reject the said goods or such portion thereof as may be

discovered not to conform to the said description and quality, on such rejection the goods

will be at the selected bidder’s risk and all the provisions relating to rejection of goods

etc., shall apply. The selected bidder shall, if so called upon to do, replace the goods

etc., or such portion thereof as is rejected by Purchase Officer, otherwise the selected

bidder shall pay such damage as may arise by the reason of the breach of the condition


Page 51 of 119

herein contained. Nothing herein contained shall prejudice any other right of the

Purchase Officer in that behalf under this contract or otherwise.

c) Goods accepted by the purchaser in terms of the contract shall in no way dilute

purchaser’s right to reject the same, later if found deficient in terms of the this clause of

the contract.

28) Warranty

a) The bidder must supply laboratory equipment with OEM warranty valid for two years and

accepted at the final destination(s) indicated in the bidding document. However, if delay in

delivery is more than 30 days time due to the reasons ascribed to the bidder, the warranty

shall start from the date of last delivery of the items covered under the PO.

b) The warranty shall cover repair/replacement of all defective parts if any, with the same or

equivalent make for any part removed.

c) At the time of goods delivery, the selected bidder shall submit a certificate/ undertaking

from the respective OEM mentioning the fact that the goods supplied are covered under

comprehensive warranty & support for the prescribed period.

d) The purchaser shall give a written notice to the selected bidder stating the nature of any

defect together with all available evidence thereof, promptly following the discovery thereof.

The purchaser shall afford all reasonable opportunity for the selected bidder to inspect

such defects. Upon receipt of such notice, the selected bidder shall expeditiously cause to

repair the defective goods or parts thereof or replace with brand new genuine/ authentic

ones having similar or higher specifications from the respective OEM, at no cost to the

Purchaser. Any goods repaired or replaced by the selected bidder shall be delivered at the

respective location without any additional costs to the purchaser.

e) If having been notified, the selected bidder fails to remedy the defect within the period

specified, the purchaser may proceed to take within a reasonable period such remedial

action as may be necessary, in addition to other recourses available in terms and

conditions of the contract and bidding document.

f) During the warranty period, the bidder shall also be responsible to ensure adequate and

timely availability of spare parts needed for repairing the supplied goods.

29) Limitation of Liability

Except in cases of gross negligence or wilful misconduct: -

a) neither party shall be liable to the other party for any indirect or consequential loss or

damage, loss of use, loss of production, or loss of profits or interest costs, provided that


Page 52 of 119

this exclusion shall not apply to any obligation of the supplier/ selected bidder to pay

liquidated damages to the Purchaser; and

b) the aggregate liability of the supplier/ selected bidder to the Purchaser, whether under

the Contract, in tort, or otherwise, shall not exceed the amount specified in the Contract,

provided that this limitation shall not apply to the cost of repairing or replacing defective

equipment, or to any obligation of the supplier/ selected bidder to indemnify the

Purchaser with respect to patent infringement.

30) Force Majeure

a) The supplier/ selected bidder shall not be liable for forfeiture of its PSD, LD, or

termination for default if and to the extent that it’s delay in performance or other failure to

perform its obligations under the Contract is the result of an event of Force Majeure.

b) For purposes of this Clause, “Force Majeure” means an event or situation beyond the

control of the supplier/ selected bidder that is not foreseeable, is unavoidable, and its

origin is not due to negligence or lack of care on the part of the supplier/ selected bidder.

Such events may include, but not be limited to, acts of the Purchaser in its sovereign

capacity, wars or revolutions, fires, floods, epidemics, quarantine restrictions, and freight

embargoes.

c) If a Force Majeure situation arises, the supplier/ selected bidder shall promptly notify the

procuring entity in writing of such conditions and cause thereof within 15 days of

occurrence of such event. Unless otherwise directed by procuring entity, the supplier/

selected bidder shall continue to perform its obligations under the contract as far as

reasonably practical.

d) If the performance in whole or part or any obligation under the contract is prevented or

delayed by any reason of Force Majeure for a period exceeding 60 days, either party at

its option may terminate the contract without any financial repercussion on either side.

e) In case a Force Majeure situation occurs with the procuring entity, the procuring entity

may take the case with the supplier/ selected bidder on similar lines.

31) Change Orders and Contract Amendments

a) The Purchaser may at any time order the supplier/ selected bidder through Notice in

accordance with clause “Notices” above, to make changes within the general scope of

the Contract in any one or more of the following: -

i. drawings, designs, or specifications, where Goods to be furnished under the

Contract are to be specifically manufactured for the Purchaser;

ii. the method of shipment or packing;


Page 53 of 119

iii. the place of delivery; and

iv. the related services to be provided by the supplier/ selected bidder.

b) If any such change causes an increase or decrease in the cost of, or the time required for,

the supplier’s/ selected bidder’s performance of any provisions under the Contract, an

equitable adjustment shall be made in the Contract Price or in the Delivery and Completion

Schedule, or both, and the Contract shall accordingly should be amended. Any claims by

the supplier/ selected bidder for adjustment under this clause must be asserted within thirty

(30) days from the date of the supplier’s/ selected bidder’s receipt of the Purchaser’s

change order.

c) Prices to be charged by the supplier/ selected bidder for any related services that might be

needed but which were not included in the Contract shall be agreed upon in advance by

the parties and shall not exceed the prevailing rates charged to other parties by the

supplier/ selected bidder for similar services.

32) Termination

a) Termination for Default

i. The procuring entity may, without prejudice to any other remedy for breach of

contract, by written a written notice of default of at least 30 days sent to the supplier/

selected bidder, terminate the contract in whole or in part: -

a. If the supplier/ selected bidder fails to deliver any or all quantities of the service

within the time period specified in the contract, or any extension thereof granted

by procuring entity ; or

b. If the supplier/ selected bidder fails to perform any other obligation under the

contract within the specified period of delivery of service or any extension granted

thereof; or

c. If the supplier/ selected bidder, in the judgement of the Purchaser, is found to be

engaged in corrupt, fraudulent, collusive, or coercive practices in competing for or

in executing the contract.

d. If the supplier/ selected bidder commits breach of any condition of the contract.

ii. If procuring entity terminates the contract in whole or in part, amount of PSD may be

forfeited.

b) Termination for Insolvency

The procuring entity may at any time terminate the Contract by giving a written notice of

at least 30 days to the supplier/ selected bidder, if the supplier/ selected bidder becomes

bankrupt or otherwise insolvent. In such event, termination will be without compensation


Page 54 of 119

to the supplier/ selected bidder, provided that such termination will not prejudice or affect

any right of action or remedy that has accrued or will accrue thereafter to procuring

entity.

c) Termination for Convenience

i. The procuring entity, by a written notice of at least 30 days sent to the supplier/

selected bidder may terminate the Contract, in whole or in part, at any time for its

convenience. The Notice of termination shall specify that termination is for the

Purchaser’s convenience, the extent to which performance of the supplier/ selected

bidder under the Contract is terminated, and the date upon which such termination

becomes effective.

ii. Depending on merits of the case the supplier/ selected bidder may be appropriately

compensated on mutually agreed terms for the loss incurred by the contract if any

due to such termination.

iii. The Goods that are complete and ready for shipment within twenty-eight (28) days

after the supplier’s/ selected bidder’s receipt of the Notice of termination shall be

accepted by the Purchaser at the Contract terms and prices. For the remaining

Goods, the Purchaser may elect:

a. To have any portion completed and delivered at the Contract terms and prices;

and/or

b. To cancel the remainder and pay to the supplier/ selected bidder an agreed

amount for partially completed Goods and Related Services and for materials and

parts previously procured by the supplier/ selected bidder.


Page 55 of 119

6.SPECIAL TERMS AND CONDITIONS OF TENDER & CONTRACT

1) Payment Terms and Schedule

a) Payment schedule – Payments to the bidder, after successful completion of the target milestones

(including specified project deliverables), would be made as under: -

S.

No.

Milestone/ Phase Deliverables Payable Amount

1.

Completion of Activity as

mentioned in section 2.

(1) (a),(b)

Completion of

installation and on site

training

Delivery Challan for ordered items

OEM Warranty Certificates for Equipments, Hardware & software items (wherever applicable)

Report on Verification of items in presence of representative of the bidder/authorised service engineer

Satisfactory installation Report & training report

Full payment

2. Completion of two

year comprehensive

onsite warranty

period for Laboratory

Equipments which

are not under AMC.

for Laboratory

Equipments which

are under AMC

Satisfactory performance report

Satisfactory performance report

Return of PSD

Return of PSD after execution of AMC agreement

3. Completion of five years

non comprehensive

maintenance period for

laboratory equipment no.

1,2,5,9,10 and 11

Half yearly Call Logs and Satisfactory preventive and corrective performance report

Half yearly payment

b) The supplier’s/ selected bidder’s request for payment shall be made to the purchaser in

writing, accompanied by invoices describing, as appropriate, the goods delivered and related

services like maintenance performed, and by the required documents submitted pursuant to

general conditions of the contract and upon fulfilment of all the obligations stipulated in the

Contract. The bill/invoice (In Triplicate) shall be submitted in the name of Joint Director

Agri.(Quality Control) ,Durgapura, Jaipur along with relevant reports/Certificates duly

signed by site coordinator /Authority.

c) The currency or currencies in which payments shall be made to the supplier/ selected bidder

under this Contract shall be Indian Rupees (INR) only.

d) All remittance charges will be borne by the supplier/ selected bidder.

e) In case of disputed items, the disputed amount shall be withheld and will be paid only after

settlement of the dispute.


Page 56 of 119

f) Payment in case of those goods which need testing shall be made only when such tests have been

carried out, test results received conforming to the prescribed specification.

g) Any penalties/ liquidated damages, as applicable, for delay and non-performance, as mentioned in this

bidding document, will be deducted from the payments for the respective milestones.

h) Taxes, as applicable, will be deducted/ paid, as per the prevalent rules and regulations.

i) The AMC payment is payable half yearly after completion of satisfactory service on pro-rata basis for

Laboratory Equipments no. 1,2,5,9,10,11.

j) Actual payment of spare parts for AMC will be made by the procuring entity.

2) Service Level Standards/ Requirements/ Agreement

a) Service level plays an important role in defining the Quality of Services (QoS). The prime

objective of service levels is to ensure high quality of services from selected bidder, in an

efficient manner to the identified users under this procurement.

b) The bidder shall submit reports on all the service levels to the Purchaser, if required. The

service levels defined below provide for target level of services required, measurements

thereof and associated penalties.

S. No.

Measurement Parameter

Service Level Penalty

1. Time taken for resolving issue

Within 15 calendar days of lodging the complaint

No penalty

2. Time taken for resolving issue

After 15 calendar days of lodging the complaint

Rs. 100/- per day per equipment.

In case the supplier fails to rectify the defect(s) within 20 calendar days, it may be considered as

breach of contract. Maximum applicable penalty shall be 5% of the order value of the current year.

3) Price Validity

The quoted price will remain valid and unchanged during the entire contract period.

4) Other terms and Conditions:

The duration of AMC period for the item no. 1,2,5,9,10 and 11 at Annexure -1 shall be of five years.

The Service Provider (SP) shall provide certificates from the OEM (Original Equipments Manufacturer) or authorized Indian representative to support maintenance activity related to these equipments during AMC period. Offer received from the SP without providing above certificates will be treated as cancelled. The SP shall coordinate the AMC related activities with Joint Director, Agriculture (QC),Durgapura Jaipur.

The term on site non comprehensive maintenance means SP will diagnose, repair/replace the faulty component/system/peripherals/software installed at all sites using its own resources within the given time frame. The required hardware, spares and softwares will be provided by the procuring entity.

During maintenance activity, if any component / equipment is found non – operational because of mishandling by user agency or if found stolen, SP will replace the same on chargeable basis by mutually agreed terms with quotation by procuring entity DoA,

AMC includes both preventive and corrective maintenance activities.

SP shall be a single contact point and available from 9 AM. To 6:30 PM on working days, having Land line/Cell Phone, Fax No, E-mail and address etc. SP must confirm complain/docket number to user and maintain the logbook. However during emergency operations (with prior intimation) or on a special event for required Sites service shall


Page 57 of 119

be made available on 24x7 hrs basis to carry out the activities under the purview of the AMC.

SP shall follow the maintenance guidelines as specified in the service manuals of the respective equipments supplied by OEM.

SP shall arrange their own manpower & bear the charges towards maintenance, transportation, shifting of equipment, lodging, boarding, etc. insurance, during any transit of the deliverables.

SP shall use their own test equipment and tools for carrying out maintenance activities.

Spares: As the maintenance is non comprehensive in nature the purchaser should keep sufficient spares of essential/critical items or as recommended by manufacturer (OEM) to meet the down time of the system.

Re-commissioning: Once the repair work is over during maintenance, SP should ensure that entire system is operational by re-commissioning the system again.

SP shall adjust time schedules for preventive maintenance of equipment in coordination with the site In - charge.

SP has to send a quarterly report as to what breakdown maintenance has been done on the equipment with current status of each equipment; Summary of Daily log is to be used for generation of maintenance report and send to In-Charge at Jaipur.

SP shall send the service report/certificates of conduct of satisfactory systems performance duly signed by the person/Authority on duty to in-charge, Jaipur.

SP shall be wholly responsible for any accident and compensation payable to the personnel employed by SP and working under their control. SP shall keep the department fully indemnified against any claim in this regard.

Jdag.(Q.C.),DoA, Govt. of Rajasthan shall not be responsible for any loss incurred by the SP for their equipments etc., however the SP shall be responsible for any loss or damage to equipments incurred by the SP or their representatives while executing the AMC.

Payments like custom duties, Octroi, sales tax, etc. towards spares procurement shall be the sole responsibility of the SP.

Jdag.(Q.C.),DoA, Govt. of Rajasthan shall have no role to play in the import of replacement parts during the maintenance period. It is distinctly understood that the SP shall be entirely responsible for carrying out the imports of spares/components required for fulfilling their commitment regarding uptime for the equipments throughout the period of the contract.

SP has to coordinate the AMC related activities with site coordinator and Joint Director, Agriculture (Quality Control).

It is mandatory for SP to complete the first year AMC. However during the first year, if the services are not up to satisfactory level, the purchaser can stop the AMC immediately.

On successful completion of first year AMC, both the parties i.e. procuring entity DoA & SP can terminate the AMC by giving six -month notice to the other party in writing.

Jdag.(Q.C.),DoA, GoR reserves the rights to break the contract any time during contract period if the AMC provided by vendor is not up to satisfactory level.


Page 58 of 119

ANNEXURE-1: BILL OF MATERIAL (BoM)

A. Items for supply:

S.No. Item (as per Technical Specification provided in

Annexure-2)

Quantity Compliance from

MAF required (as

per the annex- 8.)

(Y/N)

1

Gas Liquid Chromatograph with components / accessories 1 set Y

components / accessories No.

Computer 1 Y

Laser Printer 1 Y

Gas Purification Unit 1 Y

Gas Cylinder ( Nitrogen , Hydrogen , Air) 2 each Y

Columns :- Y

1 . 5% OV 101 - 100 cm. and 50 cm. 1 each Y

2. 3%OV 101 - 100 cm 1 Y

3. 3%Dexyl 300 Chroms. 1 Y

4. SE 30 SS 1 Y

5. OV - 210 and 17 1 each

6. Fused silica Capillary column -30meter

X0.25mm i.d.X 0.25um film thickness trb-5 or

equivalent

1 Y

Bracket for cylinder holding , cylinder trolley 1 Y

Hamilton Liquid syringe 10 µl capacity . 5 Y

2 Analytical Balance 1 Y

3 Top Pan Balance 1 Y

4 Sonicator 1 Y

5 UV - VIS Spectrophotometer 1 Y

6 Air Conditioner 1 Y

7 Distilled Water Plant (S.S.) 1 Y

8 Refrigerator 2 Y


Page 59 of 119

9 Photocopier 1 Y

10 ELISA (Enzyme Linked Immune Sorbent Assay 1 Y

11 Fluorescent Microscope with phase contrast attachment 1 Y

Page 60 of 119

Annexure 2: Format for Technical Specifications with Compliance Sheet:

Note: All the specifications below are minimum specifications and higher specifications shall be used wherever necessary/ required. Deviation on

higher side shall only be considered and no extra weightage shall be awarded for such deviations. Also, the bidder is required to submit the technical

compliance statement for each item on the respective OEM’s letter-head.

Item No. 1 Name :- GLC

1 2. 3. 4. 5. 6. 7.

S.

N

o.

Tender technical specifications Features

available in

Equipment

YES /NO

Any Deviation

from

Specifications

Correspon

ding

Page No,

Para No of

Literature /

Catalogue

Encl.

Technical

Committee

Report

Remar

ks If

Any

1. Microprocessor controlled Gas Chromatography system With Dual FID,

Dual Channel chromatography software and standard accessories ,

installation kit, working on 220 V AC, 50Hz.

1. Oven

(a)Temp Range : Ambient to minimum 400o C in . steps of 0.1o C with accuracy

±0.2 o C with decimal display.

(b)Temp. Programming : 0.1o C to 40o C /min in steps

. 0.1o C/min

(c)Ramps : 9 Ramps , 10-Plateus with

hold time in single method

(d)Auto Diagnostic : Should be available on standard.

(e)Oven Capacity :S.S. body with 13-15 litre

. capacity or better

to accept Packed ( S.S., Glass


Page 61 of 119

Column ), all type of capillary

columns, Three injectors, Three

columns, 3- Detectors

simultaneously installed.

(f)Display :Large LCD display of set & actual status of temp., flow, pressure current simultaneously. (g)Auto Cooling :Cooling Rate 400oC to 70oC in

<6 minuts

2. Injector : on column packed injector (2

Nos)+ One capillary injector

With split/ split less facility

(b) Temp Range :Ambient to 450o C in step of

0.1o C with accuracy of ± 0.2o C

with decimal display, Can Accept S.S/ Glass column

upto 12 meter length,

wide bore capillary column upto 110 meter

length.

3. On column capillary injector with split /split less facility. (01

No.)

(a) Temp Range :Ambient to 450o C in steps of

0.1oC with accuracy

of ±0.2oc. can accept all type of capillary column up to

110 length.

4. Pneumatic System :EFC/EPC for carrier, fuel, & Air

gas, entry through key board

with Simultaneous display of


Page 62 of 119

gas flow / pressure for set and

actual parameter with gas

name. For Carrier Electronic

Flow Controller (EFC),

Hydrogen, Air, Helium Gas

Pressure Range for

N2/H2/Air :

0-60 psi

Total Flow Setting for

N2/H2 : 0-100

ml/min.

Total Flow Setting for

Air : 0-800

ml/min.

6. Flame Ionization Detector(FID) (Dual Type)

(a) Type :Quartz jet 0.32 mm id.

(b) Temp. Range :Ambient to 450oC in step of

0.1oC with accuracy of

±0.2 0C with decimal display.

(c) Range :X1, X10, X100, X1000.

(d) Linear Dynamic Range :Greater than 1X107

(e) Flame Detection :Automatic detection of flame

out and Re-ignition

7. Chromatography Software :Dual channel Microsoft

windows based Chromatography software for Quantitative & Qualitative


Page 63 of 119

end Results, % Area, % Height, Data Storage, Overlay for Multi

Chromatograms, Re-intrigation, Report Generation, Component Name,

Calibration etc.

8.Computer (International Branded) :Core i-7, 4 GB RAM, 1TB-

HDD, 18.5”TFT monitor, CD-Drive,

16GB pen drive, Pad mouse,

Key Board. Anti Virus Software

(b) Printer :Laser Printer

9. UPS: An uninterruptable power supply system (of reputed brand with

proven performance record) of 5 KVA online capacity, with one hour

backup supported by maintenance free sealed batteries (64AH batteries

or better) should be supplied one unit common for the system.

10. Gas purification panel for nitrogen, Hydrogen & air with oxy filter

(Imported) and control box.

11. Nitrogen, Hydrogen & Zero Air Gas cylinder Filled with ultrapure

grade gases with explosive certificate & Double stage S.S.

diaphragm Pressure regulator 2 No each ( Total 6 Nos)

12. Bracket for cylinder holding 6 Nos, cylinder trolley (1 No)

13. Hamilton Liquid syringe 10 µl capacity 5 Nos.

Columns


Page 64 of 119

1 . 5% OV 101 - 100 cm.& 50 cm- each one

2. 3%OV 101 - 100 cm- one

3. 3%Dexyl 300 Chroms.- one

4. SE 30 SS- one

5. OV - 210 , 17 -each one

6. Fused silica Capillary column -30meter X0.25mm i.d.X 0.25um film thickness trb-5 or equivalent

Item No.2 Name:- Analytical Balance

1. 2. 3. 4. 5. 6. 7.

S.

N

o


available in

Equipment

YES /NO

Any Deviation

from

Specifications

Correspondin

g Page No,

Para No of

Literature /

Catalog Encl.

Technical

Committee

Report

Remarks

If Any

1. Weighing Capacity : 0.0 to 210 g Minimum load: 0.01mg readability: up to 5 decimals (0.00001) repeatability: up to 5 decimals (0.00001) response time: is less than 3-4 seconds Weighing balance should have internal calibration facility Pan size 90 mm and above The balance should have overload protection Based on E.M.F.C Technology Linearity: ± 0.2mg


Page 65 of 119

Interface: 2 × RS 232, USB-type A, USB-type B

Display : 5'' colour LCD Backlight

Sensitivity drift: 1 ppm/°C in temperature +10° ÷ +40°C

Item No. 3: Top Pan Balance

1. 2. 3. 4. 5. 6. 7.

S.

No


available in

Equipment

YES /NO

Any

Deviation

from

Specificatio

ns

Corresponding

Page No, Para No

of Literature /

Catalog Encl.

Technical

Committee

Report

Remarks

if Any

1. Max. Capacity 1 kg

Readability (g) 0.5g

Pan Size 220x270 mm

Display LED Display

Feature:

Auto External Calibration

30,000 High resolution

LED Display

Auto power save mode

Inbuilt Rechargeable Battery

Low battery indication

Optional RS 232 Interface


Page 66 of 119

Tare Range Facility

Item No. 4: Sonicator

1. 2. 3. 4. 5. 6. 7.

S.

No


available in

Equipment

YES /NO

Any

Deviation

from

Specificatio

ns

Corresponding

Page No, Para

No of Literature

/ Catalog Encl.

Technical

Committee

Report

Remarks

If Any

1. Electric Supply :220V, A.C, 50 Hz 1 phase. Ultrasonic

Power :100 watt ,

Ultrasonic Frequency : 40 K Hz +/- 3 KHz Ultrasonic Generator : With latest MOSFET base technology. With Auto Degassing facility. Automatic frequency tuning for maximum output Modular generator for easier modification/servicing

Timer : Two Digit LED display 5 to 60 minutes Timer with settable & On / Off keys. Auto Degassing : Preset 10 min., to remove dissolved gases from solution to increase Ultrasonic efficiency.

Heater : S.S sheathed cartridge type immersion heater approx. power capacity 100 watts

Micro Controller base Temperature Control Digital Timer : Digital Temp. Controller with two Digit LED Display , Up / Down Keys for setting Settable temp. : Ambient temperature to 60°C Maximum allowable Temp is 65°C

Transducers : PZT Sandwich type, bonded on the base of S.S Tank, Crystal used of PZT4, of matrock /Morgon Make. High temp. & good quality wires for connection & epoxy for bonding of transducers are used.

Tank Clear Size : 2300x130x150

Tank MOQ : S.S 304grade, 1.6mm thick & buffed form inside

Tank Drain Valve : 1/2" Ball Valve is provided for cleaning the tank

Tank Housing MOQ : S.S 304 grade

. Accessory : Basket , Lid , Manual is Provided


Page 67 of 119

Item No. 5 :UV-VIS Spectrophotometer

1. 2. 3. 4. 5. 6. 7.

S.

No


available in

Equipment

YES /NO

Any

Deviation

from

Specificati

ons

Corresponding

Page No, Para

No of Literature

/ Catalog Encl.

Technical

Committe

e

Report

Remarks

If Any

1. UV-Vis Spectrophotometer should be microprocessor based with latest external

computer with following specifications.

Photometric System True Double beam optics

Monochromator Czerny-Turner mounting monochromatic

system

Detector Photomultiplier tube

Light source Halogen lamp, Deuterium lamp, auto

position adjustment of light source

Wave length range 190 to 1100nm

Wavelength accuracy ± 0.1nm at 656.1nm D2


Page 68 of 119

Wavelength repeatability ± 0.05nm

Scanning speed Wavelength slew rate: about 14000nm/min

Wavelength scan rate about 4000 to 0.5nm/min

Spectral bandwidth Variable spectral band width from 0.5, to

4nm adjustable

Resolution 0.1nm

Photometric modes Absorbance(Abs), Transmittance(%T) ,

Reflectance(%R), Energy(E)

Photometric range Absorbance -2 to 2 Abs or better

Photometric accuracy ±0.003 Abs(at 1 Abs) or better with NIST

standard.

Photometric Repeatability ±0.001 Abs (at 0.5Abs) or better

Computer system Latest Personal computer with 4 GB Ram,

LCD monitor and laser printer(multi mode)

- Latest original Microsoft windows

operating software

-Latest Spectroscopy software which

enables the scanning, wavelength program,

kinetics, single wave and multi wave length

measurements- quantisation of unknowns

in percentage from single point and

multiple point (calibration curve), scanning,

etc.,


Page 69 of 119

Accessories All the required accessories for smooth

operation of the spectrophotometer and

essential consumable and non consumable

spares also be supplied.

Item No. 6: Split Air conditioner

1. 2. 3. 4. 5. 6. 7.

S.

No


available in

Equipment

YES /NO

Any Deviation

from

Specifications

Corresponding

Page No, Para

No of Literature /

Catalog Encl.

Technical

Committe

e

Report

Remarks

If Any

1. 1.5 Ton (5 star Rating)

2 Copper wire

3 With stabilizer stand & Auto clean

4 28% faster cooling

5 26% energy saving

6 Monsoon comfort

7 Dual protection Filter

8 Auto Air swing with Auto operation & sleep Mode


Page 70 of 119

Item No. 7 :Distilled water Plant (S.S.)

1. 2. 3. 4. 5. 6. 7.

S.

No


available in

Equipment

YES /NO

Any Deviation

from

Specifications

Corresponding

Page No, Para

No of

Literature /

Catalog Encl.

Technical

Committee

Report

Remarks If

Any

1. Water still table mounting whole body SS 304

with fitted high energy efficient industrial grade

heating elements

Output capacity : 2 litter /hr


Page 71 of 119

Item No.: 8 Refrigerator

1. 2. 3. 4. 5. 6. 7.

S.

No


available in

Equipment

YES /NO

Any Deviation

from

Specifications

Corresponding

Page No, Para

No of Literature

/ Catalog Encl.

Technical

Committee

Report

Remarks If

Any

1. 260 Ltr. With double door

2 Complete Frost free

3 Quick Ice making

4 Door colling working without stabilizer

5 Tough Glass

6 10 years warranty on compressor

7 4 star rating

8 194 units – 365 days


Page 72 of 119

Item No. 9 :Photocopier

1. 2. 3. 4. 5. 6. 7.

S.

N

o


available

in

Equipment

YES /NO

Any

Deviation

from

Specification

s

Correspondi

ng

Page No,

Para No of

Literature /

Catalog

Encl.

Technical

Committee

Report

Remarks

If Any

1. 20PPM Machine

2 Networking

3 Printer Resolution ( 1200x1200) DPI

4 Mobile Printing

5 Duplexing

6 Single Tray with byepass

7 Enhanced Scaning (4800x4800) DPI


Page 73 of 119

Item No. 10 :ELISA (Enzyme Linked Immune Sorbent Assay) complete unit

1. 2. 3. 4. 5. 6. 7.

S.

N

o


available in

Equipment

YES /NO

Any Deviation

from

Specifications

Corresponding

Page No, Para

No of

Literature /

Catalogue

Encl.

Technical

Committee

Report

Remarks If

Any

A.ELISA READER

1. Fully automatic microprocessor Controlled; Micro-Strip type,Touch

screen, on board thermal printer& have option of external printer

and five roll of thermal should be supplied along with the unit

2 Wavelength: 405, 450, 492, 630 nm and 3 optional (550, 595, 690

nm, automatic filter selection).

3 Filters : It should have Halogen lamp &high quality interfere 4 filters

( 405, 450, 492, 620 nm) and 3 optional (550, 595, 690 nm,

automatic filter selection).

4 Linear measurement range: 0.000 to 3.500 Absorbance Units(A).

5 should have 96 well and have reading capabilty 1 to 96 wells

individually It should be read type of plate like U,V, Flat Bottom&

standard 12x8 format 96 wells Microplate.

6 photometric accuracy: 2% From 0 to 1.5 A, 3% From 1.5A to 3.5 A

7 Read time: should be less than 8 seconds.

8 Linearity: 0-3.0Abs 2%,96-well plate ( at 405 nm and 450 nm).


Page 74 of 119

9 Should have programmable time and speed shaking ( shaker

facility- stepper or continuous mode) , Should have data transfer

facility to the computer

10 Measurement should be Bichromatic as wellas Trichromatic.

11 Analysis mode should be cutt off, Multi point Linear, Multi point

non Linear,4 parameter.

12 Battery back up for 250 tests and more than 2500 results.

13 Should have external Computer with printer, capable of printing complete results and graphs etc. directly from the ELISA Reader. Computer system having Intel 3rd gen. core i5 processor with 3.0 MHz . HRD500GB, RAM

4GB , with 21” LED monitor, window7, 1GB graphics cord, USB mouse,

key board, fine wire point, on line UPS with 30 minutes to one hours

backup.

14 Repeatability: 0.5% @ 2.00.

15 It should be CE, 13485&ISO certified.

16 Voltage stabiliser should be provided.

17 Should work on 180-220V AC.and voltage stablizer should be provided.

18 Resolution: 0.001 Abs.

19 Detector: LED / Photodiode.

B. Washer

1 It should have specially designed 8/12 channel Manifold assembly to prevent any scratching on bottom of well. User friendly touch screen display.

2 Auto rinse facility while shut down and should have capability to flat, U or V bottomed microplates or 8/12 wells strip plates.

3 User programmable soak time , wash cycles and dispensing volume. Programmable wash cycle up to 20.

4 On board two plate incubator at 37°c with programmable timer.


Page 75 of 119

5 Choice to use any of the 2 wash buffers while washing. On line connection for four bottles. Waste bottle full warning with audible alarm.

6 Memory- 65 open tests /Programs.

7 Dispenser speed controller Integrating vacuum dispensing pumps to ensure accurate and quite washing

8 Programmable washing sequences , long short rinsing and priming. Programs: user programmable protocols (aspirate, dispense , and soak).

9 Autoclavable manifold with Removable plate carrier to perform decontamination.

10 Residual Volume less than 5µl

11 Should work with input 180 to 240 V AC 50 Hz supply with UPS of 30 min back up time capacity

12 Aerosol cover for user safety.

13 The company should be CE/ 13485 ISO Certified.


Page 76 of 119

Item No. 11 Fluorescent Microscope with phase Contrast attachment

1. 2. 3. 4. 5. 6. 7.

S.

N

o


available in

Equipment

YES /NO

Any Deviation

from

Specifications

Corresponding

Page No, Para

No of

Literature /

Catalogue

Encl.

Technical

Committee

Report

Remarks If

Any

1. .Frame :- Rigid and vibration free frame, Single mold

sturdy stand with antirust material. Extended base for

better stability.

2 Illumination :-Built in Full Koehler illumination quartz

Halogen 12V-100 W or Koehler illumination LED with

life time of 30,000hrs.

3 Eyepiece :-Siedentopf type wide field eyepiece 10x /

20mm with diopter adjustment on both eye piece


Page 77 of 119

should have trinocular tube with 20mm field of view.

4 Stage :-Large graduated mechanical movable

(up/down and longitudinal Y-direction) stage and

Range of movement 75mm × 50mm with two slide

holding capacity.

5 Nosepiece :- Reverse angle quadruple nosepiece (ball

bearing) with click stops and rubber grips.

6 Objectives :- The microscope specially the phase

contrast &Fluorescence facility consisting of objective

10x,20x,40x,and 100x(oil). Fluorescence with semi

apochromat / PLAN FLUOR, phase contrast objective

10x,20x,40x,and 100x(oil)

7 Condenser/Filters :- Fluorescence light Condenser

with condenser movement knob Fluorescence

light field diapharagm with centering adjustment

knob, bright field 1.25 N. A. Abbe. Iris diaphragm,

swing out filter holder and condenser alignment

screws. Bright field filters:- Blue, green, Ultra

violet.

8 Focusing:- Coaxial fine and coarse focusing knob on

both side and microscope, coarse adjustment travel

range 20 mm (stage movement distance up/down)

9 observation tube:-wide field trinocular observation


Page 78 of 119

head inclined rotation of 360 degree with field no 20

mm

10 Fluorescence unit:-Consisting of blue or green

excitation light observation and rotating turret with a

capacity to hold up 2-4 Fluorescence filter block.

Objectives provide bright fluorescence images with no

aberrations when changed from transmitted light to

fluorescence.

11 Camera:-CCD Monochrome camera, 5.0 mega pixel

for high resolution images, progressive scan inter lens

CCD. Pixel size 6.45 mm/pixel/1360x1024 pixel, 12

bit. and have capture and measurement software.

Camera-USB camera for connection to computers.

Simple to use plug camera into campus’s USB port

load the software, Great for viewing specimens and

displaying on a computer. System should be capable

of handling bright field and fluorescence object.

Software: system should supply with Licensed

imaging software with feature image acquisition ,

fluorescence mixing / un-mixing . AVI acquisition ,Real

Time Live display , Measurement etc. Quoted

Microscope , camera and imaging software should be

from same manufacturer.

12 Computer with Software :- Suitable latest branded


Page 79 of 119

system having i5 processor with 3.0 MHz or more.

HRD 750GB or more 8GB RAM or more, with 21”

LED monitor, window7, 1GB graphics cord, USB

mouse, key board, fine wire point, on line UPS

with 30 minutes to one hours backup & coloured

printer (Laser printer).

Software should provide control to all the functions of

the microscope and have features to acquire

multidimensional images and should be capable of

driving the camera for capture of image in real time

13 Packaging Contents :- power cord, Instruction

manual, dust cover, STYROFOAM MOLDED BOX

14 Certification: Microscope should have international

quality standard .CE , ISO , FDA enlistment.

Document like certificate , user list and compliance

should enclosed in bid.


Page 80 of 119

Page 81 of 119

Annexure- 3

Undertaking

i. I/We,........................................................................................................................(Name of Proposer) address................................................................................................. do hereby solemnly affirm and declare as under

ii. I/we have read carefully the term and conditions of Purchase of Laboratory Equipments, document issued by Joint Director, Agriculture (QC) , Durgapura, Jaipur. I / we agree with all term and conditions.

iii. I / we are participated as a manufacturer in Purchase of Laboratory Equipments process . iv. The approved rate will be valid for the financial year 2016-17 and I/we will not sale the

product below the approved rate in Rajasthan State. v. I/We will be fully responsible for any irregularities like supply of inferior quality product, fake

billing etc. and I/we would accept the any legal / administrative action taken by Department.

The detail of documents submitted by me/us are as follows:

S.No. Enclosure

Page No.

Yes/No

1 Original Document with terms and conditions signed with seal

2 Bidding Document Fee Rs. 1000/,RISL Processing Fee Rs. 500/- and Bid Security (Scan copy of DD and bank guarantee)

3 Legal Entity-Copy of Certificates of incorporation / partnership deed/ affidavit of proprietorship

4 The document regarding turn-over of last 3 years as per Annexure -1

5 Net worth of bidder in the last financial year (CA certificate)

6 Statement of previous Govt. supply and performance certificate / Work order of the firm for the last 3 years.

7 Original Equipment manufacturer as per Annexure - 9

8 Sale tax/VAT registration certificate and sale tax/VAT clearance certificate of year 2016-17 (up to 31.03.2016) PAN No.-

9 List of distributors/ dealer network of manufacturer in the State is essential, if bidder made supply through distributor or dealer

10 Copy of manufacturing licence

11 Undertaking on his letter -pad regarding two years warranty with spare parts for the equipments.

12 Undertaking on his letter- pad regarding to provide training to our technical staff or other persons nominated by the department

13 BIS Certificate or Test Report of any GoI approved Testing Centre.

14 Declaration in Annexure-5. as per section 7 of RPPT Act, 2012

15 Certificate issued by competent authority for small scale industries of Rajasthan and sick industries other than small scale industries as per RTTP Rule 2013

Signature of proposer with Seal


Page 82 of 119

ANNEXURE-4 : PRE-BID QUERIES FORMAT

Name of the Company/Firm:

Bidding Document Fee Receipt No. ___________ Dated___________ for Rs. _____________/-

Name of Person(s) Representing the Company/ Firm:

Name of Person Designation Email-ID(s) Tel. Nos. & Fax Nos.

Company/Firm Contacts:

Contact Person(s) Address for

Correspondence

Email-ID(s) Tel. Nos. & Fax Nos.

Query / Clarification Sought:

S.No. RFP

Page No.

RFP Rule

No.

Rule Details Query/ Suggestion/

Clarification

Note: - Queries must be strictly submitted only in the prescribed format (.XLS/ .XLSX/ .ODF).

Queries not submitted in the prescribed format will not be considered/ responded at all by the

procuring entity. Also, kindly attach the coloured scanned copy of the receipt towards the

submission of the bidding/ tender document fee.

Page 83 of 119

ANNEXURE-5: BIDDER’S AUTHORIZATION CERTIFICATE{to be filled by the bidder}

To,

{Procuring entity},

______________________________,

______________________________,

I/ We {Name/ Designation} hereby declare/ certify that {Name/ Designation} is hereby authorized

to sign relevant documents on behalf of the company/ firm in dealing with NIB reference No.

______________________ dated _________. He/ She is also authorized to attend meetings &

submit technical & commercial information/ clarifications as may be required by you in the course

of processing the Bid. For the purpose of validation, his/ her verified signatures are as under.

Thanking you,

Name of the Bidder: - Verified Signature:

Authorised Signatory: -

Seal of the Organization: -

Date:

Place:


Page 84 of 119

ANNEXURE-6: SELF-DECLARATION{to be filled by the bidder}

To,

{Procuring entity},

______________________________,

In response to the NIB Ref. No. _____________________________ dated ___________ for

{Project Title}, as an Owner/ Partner/ Director/ Auth. Sign.of

____________________________________, I/ We hereby declare that presently our Company/

firm _________________, at the time of bidding,: -

a) possess the necessary professional, technical, financial and managerial resources and

competence required by the Bidding Document issued by the Procuring Entity;

b) have fulfilled my/ our obligation to pay such of the taxes payable to the Union and the

State Government or any local authority as specified in the Bidding Document;

c) is having unblemished record and is not declared ineligible for corrupt & fraudulent

practices either indefinitely or for a particular period of time by any State/ Central

government/ PSU/ UT.

d) does not have any previous transgressions with any entity in India or any other country

during the last three years

e) does not have any black listing or debarment by any other procuring entity

f) is not insolvent in receivership, bankrupt or being wound up, not have its affairs

administered by a court or a judicial officer, not have its business activities suspended

and is not the subject of legal proceedings for any of the foregoing reasons;

g) does not have, and our directors and officers not have been convicted of any criminal

offence related to their professional conduct or the making of false statements or

misrepresentations as to their qualifications to enter into a procurement contract within a

period of three years preceding the commencement of the procurement process, or not

have been otherwise disqualified pursuant to debarment proceedings;

h) does not have a conflict of interest as mentioned in the bidding document which

materially affects the fair competition.

i) will comply with the code of integrity as specified in the bidding document.

If this declaration is found to be incorrect then without prejudice to any other action that may be

taken as per the provisions of the applicable Act and Rules thereto prescribed by GoR, my/ our

security may be forfeited in full and our bid, to the extent accepted, may be cancelled.

Thanking you,

Name of the Bidder: -



Date:

Place:


Page 85 of 119

ANNEXURE-7: CERTIFICATE OF CONFORMITY/ NO DEVIATION{to be filled by the bidder}

To,

{Procuring Entity},

______________________________,

CERTIFICATE

This is to certify that, the specifications of Laboratory equipments which I/ We have mentioned in

the Technical bid, and which I/ We shall supply if I/ We am/ are awarded with the work, are in

conformity with the minimum technical specifications of the bidding document and that there are

no deviations of any kind from the requirement specifications.

Also, I/ we have thoroughly read the bidding document and by signing this certificate, we hereby

submit our token of unconditional acceptance to all the terms & conditions of the bidding

document without any deviations and assumptions.

I/ We also certify that the price I/ we have quoted is inclusive of all the cost factors involved in the

end-to-end implementation and execution of the project, to meet the desired Standards set out in

the bidding Document.

Thanking you,




Date:

Place:


Page 86 of 119

ANNEXURE-8: DECLARATION BY BIDDER{to signed by selected bidder}

I/ We declare that I am/we are Manufacturer in the equipments for which I/ We have quoted.

If this declaration is found to be incorrect then without prejudice to any other action that may be

taken, my/ our security may be forfeited in full and the bid, if any, to the extent accepted may be

cancelled.




Date:

Place:


Page 87 of 119

ANNEXURE-9: MANUFACTURER’S AUTHORIZATION FORM (MAF){to be filled by the OEMs on

his original letter head}

(Indicative Format)

To,

{Procuring Entity},

______________________________,

Subject: Issue of the Manufacturer’s Authorisation Form (MAF)

Reference: NIB/ RFP Ref. No. _____________________ dated ________

Sir,

We {name and address of the OEM} who are established and reputed original equipment

manufacturers (OEMs) having factories at {addresses of manufacturing location} do hereby

authorize {M/s __________________________} who is our {Distributor/ Channel Partner/

Retailer/ Others <please specify>} to bid, negotiate and conclude the contract with

Jdag.(Q.C.) , DoA against the aforementioned reference for the following

equipment/Hardware/Software manufactured by us: -

{OEM will mention the details of all the proposed product(s) with their make/

model.}

We undertake to provide OEM Warranty with spare parts for the offered Equipment, as

mentioned above, for 2 Years for laboratory equipments. The authorised distributer/dealer

shall during the warranty period replace the parts if any, or rectify any manufacturing defect

found during the above period so as to make the machinery operative and in perfect

condition.

They are also authorised to carry out Annual Maintenance Contract and repairs contract for

the period as desired by the purchase officer after the expiry of two years comprehensive

warranty. They will be responsible to ensure adequate regular supplies of spare parts,

consumables, non- consumables needed for the same whether under AMC or otherwise.

In case of change of authorised distributor/dealer, we will inform the purchase officer

accordingly. The new dealer/distributor will be responsible for after sales & service and annual

maintenance and repairs contract as above. In case of failure of authorised dealer/distributor

we will be responsible for providing after sales service of the equipment as per terms and

conditions of tender and contract.

We hereby confirm that the offered Equipment/Hardware/ Software is not likely to be declared

as End-of-Sale within next 3 months from the date of bid submission.

We hereby confirm that the offered Equipment/Hardware/ Software is not likely to be declared

as End-of-Service/ Support within next 5 years from the date of bid submission.]

Yours faithfully,

For and on behalf of M/s (Name of the manufacturer)

(Authorized Signatory)

Name, Designation & Contact No.:

Address: ___________________________________

Seal:


Page 88 of 119

ANNEXURE-10: UNDERTAKING ON AUTHENTICITY OF LABORATORY EQUIPMENTS

{To be filled by the bidder on his original letter head)

To,

{Procuring Entity},

______________________________,

Reference: NIB No. : ___________________________________ Dated: __________

This has reference to the items being supplied/quoted to you vide bid ref. no. ___________ dated

___________.

We hereby undertake that all the components/parts/assembly used in the equipment shall be

genuine, original and new components /parts/assembly from respective OEMs of the products

and that no refurbished/duplicate/ second hand components/ parts/ assembly are being used or

shall be used. In respect of licensed operating system, we undertake that the same shall be

supplied along with the authorized license certificate with our name/logo. Also, that it shall be

sourced from the authorized source for use in India.

In case, we are found not complying with above at the time of delivery for the equipment already

billed, we agree to take back the equipment already supplied at our cost and return any amount

paid to us by you in this regard and that you will have the right to forfeit our Bid Security/ SD/ PSD

for this bid or debar/ black list us or take suitable action against us.

Authorized Signatory

Name:

Designation:


Page 89 of 119

ANNEXURE-11: ITEMS OFFERED – BOM{to be filled by the bidder}

Please fill the following BOM for all the offered components.

S.No. Product Details

(Only one make and model)

Detailed

Technical Specification

Reference**

OEM Details

(Name, Address, E-Mail, Mobile Nos.)

1. {Item No. xx}

2. {Item No. xx}

3. {Item No. xx}

4. {Item No. xx}

5. {Item No. xx}

6. {Item No. xx}

7. {Item No. xx}

8. {Item No. xx}

9. {Item No. xx}

10. {Item No. xx}

11. {Item No. xx}

** Please attach Technical specifications compliance sheet (only on OEM’s letter-head) and

provide reference number in this column. (Deviations, if any, should be appropriately mentioned &

highlighted in the compliance/ deviation column of the respective table as provided in Annexure-2:

Technical Specifications of this bidding document)


Page 90 of 119

ANNEXURE-12: FINANCIAL COVER LETTER &FORMAT (Indicative)

{to be submitted by the bidder on his Letter head}

To,

{Procuring Entity},

______________________________,

Reference: NIB No. :___________________________________ Dated:__________

Dear Sir,

We, the undersigned bidder, Having read & examined in detail, the Bidding Document, the receipt

of which is hereby duly acknowledged, I/ we, the undersigned, offer to supply/ work as mentioned

in the Scope of the work, Bill of Material, Technical specifications, Service Level Standards & in

conformity with the said bidding document for the same.

I / We undertake that the prices are in conformity with the specifications prescribed. The quote/

price are inclusive of all cost likely to be incurred for executing this work. The prices are inclusive

of all type of govt. taxes/duties.

I / We undertake, if our bid is accepted, to deliver the goods in accordance with the delivery

schedule specified in the schedule of Requirements.

I/ We hereby declare that in case the contract is awarded to us, we shall submit the contract

performance guarantee as prescribed in the bidding document.

I / We agree to abide by this bid for a period of _____ days after the last date fixed for bid

submission and it shall remain binding upon us and may be accepted at any time before the

expiry of that period.

Until a formal contract is prepared and executed, this bid, together with your written acceptance

thereof and your notification of award shall constitute a binding Contract between us.

I/ We hereby declare that our bid is made in good faith, without collusion or fraud and the

information contained in the bid is true and correct to the best of our knowledge and belief.

We understand that you are not bound to accept the lowest or any bid you may receive.

We agree to all the terms & conditions as mentioned in the bidding document and submit that we

have not submitted any deviations in this regard.

Date:

Authorized Signatory

Name:

Designation:

Page 91 of 119

GOVERNMENT OF RAJASTHAN Office of Joint Directorate , Agriculture(Q.C.), Durgapura,

Jaipur, Rajasthan-302018 FINANCIAL BID FORMAT (INDICATIVE)

{to be submitted by the bidder only in BoQ format (.XLS) available at e-Procurement portal}

Tender Inviting Authority: Joint Director Agri.(Q.C.), Durgapura Jaipur.

Name of Work: Supply and Installation of Laboratory Equipments

NIT Ref. No. NIT No. : F6( )JDAg/QC/2016-17/ Dated:

Bidder

Name:

PRICE SCHEDULE

(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent

columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

Sl.

No

Item Description Qty

(No.)

Per Unit Price

(In Rs.)

(Inclusive of all

govt. taxes and

other levies

except CST

&RVAT)

Applicable

CST (in Rs.)

per unit

RVAT

Amount

(in Rs.)

per unit

Per Unit Price

(In Rs.)

(Inclusive of CST/

excluding RVAT)

Total

Cost Rs.

(Inclusive

of CST/

excluding

RVAT)

1 2 3 4 5 6 7=(4+5) 8= (3X7)

3

Top Pan Balance 1


Page 92 of 119

4 Sonicator 1

6 Air Conditioner 1

7 Distilled Water

Plant (S.S.)

1

8 Refrigerator 2

Total in Figures

Total in Words


Page 93 of 119

Tender Inviting Authority: Joint Director,Agri.(Q.C.),Durgapura ,Jaipur

Name of Work: Supply & installation of Laboratory Equipments

NIT Ref. No. NIT No. : F6() Dag/QC/2016-17 Dated:

Bidder

Name:

PRICE SCHEDULE

(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the

bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

Sl.

No

Item

Description

Qty

(No.)

Uints Unit

Price

(In Rs.)

(Inclusive

of all

govt.

taxes and

other

levies

except

CST &

RVAT)

Applicable CST (in

Rs.) per unit

RVAT

Amount

(in

Rs.)per

unit

Unit

Price

(In Rs.)

(Inclusive

of CST/

excluding

RVAT)

Total

Amount

In Rs.

(Inclusive

of CST/

excluding

RVAT)

1 2 3 4 5 6 7 8=(5+6) 9=(3x8)=A

1 A Gas Liquid

Chromatograph

1 1 set

0.00


Page 94 of 119

Non

Comprehensive

Annual

Maintenance

Charges (AMC)

per unit

All taxes

& levies

excluding

service

tax per

unit

Per unit Non

Comprehensive

Annual Maintenance

Charges (AMC)

including All taxes &

levies excluding

service tax per unit

Total Cost in INR

1 2 3 4 5 6 7=5+6 8=3X7= B

1 B GLC, Non

Comprehensive

Annual

Maintenance

1 1st

year

0.000 0.000 0.000 0.00

2nd

year

0.000 0.000 0.000

3rd

year

0.000 0.000 0.000

4th 0.000 0.000 0.000

5th

year

0.00 0.00 0.00

Total AMC

cost

0.00 0.00

Average

AMC cost for

5 years

0.00 0.00

Total in Figures for item no. 1

(A+B)

0.00

Total in Words for item no. 1

(A+B)


Page 95 of 119

Note:-

Service tax will be paid extra as per prevailing rates for AMC only.

Least financial quote will be considered as L1 based on item wise Total cost and average of AMC charges excluding service tax quoted by the bidder.

The rates for AMC will be average value of the contract for five years. Cost of five years Maintenance service after warranty period would be evaluated from the price schedule and would be taken in to account for evaluation.

Average value of five years AMC cost will be computed into account.

Page 96 of 119




Bidder

Name:

PRICE SCHEDULE



Sl.

No


(No.)

Uints Unit

Price

(In Rs.)

(Inclusive

of all

govt.

taxes and

other

levies

except

CST &

RVAT)

Applicable CST (in

Rs.) per unit

RVAT

Amount

(in

Rs.)per

unit

Unit

Price

(In Rs.)

(Inclusive

of CST/

excluding

RVAT)

Total

Amount

In Rs.

(Inclusive

of CST/

excluding

RVAT)

1 2 3 4 5 6 7 8=(5+6) 9=(3x8)=A

2 A Analytical Balance 1 Nos

0.00

Non

Comprehensive

All taxes

& levies

Per unit Non

Comprehensive

Total Cost in INR


Page 97 of 119

Annual

Maintenance

Charges (AMC)

per unit

excluding

service

tax per

unit

Annual Maintenance

Charges (AMC)


levies excluding


2 B Analytical Balance

Non

Comprehensive

Annual

Maintenance

1 1st

year

0.000 0.000 0.00

2nd

year

0.000 0.000 0.000

3rd

year

0.000 0.000 0.000

4th 0.000 0.000 0.000

5th

year

0.00 0.00 0.00

Total AMC

cost

0.00 0.00

Average

AMC cost for

5 years

0.00 0.00


(A+B)

0.00


(A+B)


Page 98 of 119

Note:-





Page 99 of 119




Bidder

Name:

PRICE SCHEDULE

(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder

is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

Sl.

No


(No.)

Uints Unit

Price

(In Rs.)

(Inclusive

of all

govt.

taxes and

other

levies

except

CST &

RVAT)

Applicable CST (in

Rs.) per unit

RVAT

Amount

(in

Rs.)per

unit

Unit

Price

(In Rs.)

(Inclusive

of CST/

excluding

RVAT)

Total

Amount

In Rs.

(Inclusive

of CST/

excluding

RVAT)

1 2 3 4 5 6 7 8=(5+6) 9=(3x8)=A

5 A UV-VIS

Spectrophotometer

1 Nos

0.00

Non

Comprehensive

Annual

All taxes

& levies

excluding

Per unit Non

Comprehensive

Annual Maintenance

Total Cost in INR


Page 100 of 119

Maintenance

Charges (AMC)

per unit

service

tax per

unit

Charges (AMC)


levies excluding


1 2 3 4 5 6 7=5+6 8=3X7= B

5B UV-VIS

Spectrophotometer

Non

Comprehensive

Annual

Maintenance

1 1st year 0.000 0.000 0.00

2nd year 0.000 0.000 0.000

3rd year 0.000 0.000 0.000

4th 0.000 0.000 0.000

5th year 0.00 0.00 0.00

Total AMC

cost

0.00 0.00

Average

AMC cost for

5 years

0.00 0.00

Total in Figures for item no.

5(A+B)

0.00

Total in Words (A+B)


Page 101 of 119

Note:-








Bidder

Name:

PRICE SCHEDULE

(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else

the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

Sl.

No

Item

Description

Qty

(No.)

Uints Unit Price

(In Rs.)

(Inclusive

of all

govt.

taxes and

other

levies

except

CST &

RVAT)

Applicable CST (in

Rs.) per unit

RVAT

Amount

(in

Rs.)per

unit

Unit

Price

(In Rs.)

(Inclusive

of CST/

excluding

RVAT)

Total

Amount

In Rs.

(Inclusive

of CST/

excluding

RVAT)


Page 102 of 119

1 2 3 4 5 6 7 8=(5+6) 9=(3x8)=A

9 A Photocopier 1 Nos

0.00

Non

Comprehensive

Annual

Maintenance

Charges (AMC)

per unit

All taxes

& levies

excluding

service

tax per

unit

Per unit Non

Comprehensive

Annual Maintenance

Charges (AMC)


levies excluding


Total Cost in INR

1 2 3 4 5 6 7=5+6 8=3X7= B

9 B Photocopier 1 1st

year

0.000 0.000 0.00

2nd

year

0.000 0.000 0.000

3rd

year

0.000 0.000 0.000

4th 0.000 0.000 0.000

5th

year

0.00 0.00 0.00

Total AMC

cost

0.00 0.00

Average

AMC cost for

5 years

0.00 0.00


Page 103 of 119

Total in Figures for item

no. 9 (A+B)

0.00

Total in Words for item

no. 9 (A+B)

Note:-








Bidder

Name:

PRICE SCHEDULE




Page 104 of 119

Sl.

No


(No.)

Uints Unit

Price

(In Rs.)

(Inclusive

of all

govt.

taxes and

other

levies

except

CST &

RVAT)

Applicable CST (in

Rs.) per unit

RVAT

Amount

(in

Rs.)per

unit

Unit

Price

(In Rs.)

(Inclusive

of CST/

excluding

RVAT)

Total

Amount

In Rs.

(Inclusive

of CST/

excluding

RVAT)

1 2 3 4 5 6 7 8=(5+6) 9=(3x8)=A

10 A ELISA 1 Nos

0.00

Non

Comprehensive

Annual

Maintenance

Charges (AMC)

per unit

All taxes

& levies

excluding

service

tax per

unit

Per unit Non

Comprehensive

Annual Maintenance

Charges (AMC)


levies excluding


Total Cost in INR

1 2 3 4 5 6 7=5+6 8=3X7= B

10 B ELISA 1 1st

year

0.000 0.000 0.00

2nd

year

0.000 0.000 0.000

3rd

year

0.000 0.000 0.000


Page 105 of 119

4th 0.000 0.000 0.000

5th

year

0.00 0.00 0.00

Total AMC

cost

0.00 0.00

Average

AMC cost for

5 years

0.00 0.00


(A+B)

0.00


(A+B)

Note:-





Page 106 of 119




Bidder

Name:

PRICE SCHEDULE



Sl.

No


(No.)

Uints Unit

Price

(In Rs.)

(Inclusive

of all

govt.

taxes and

other

levies

except

CST &

RVAT)

Applicable CST (in

Rs.) per unit

RVAT

Amount

(in

Rs.)per

unit

Unit

Price

(In Rs.)

(Inclusive

of CST/

excluding

RVAT)

Total

Amount

In Rs.

(Inclusive

of CST/

excluding

RVAT)

1 2 3 4 5 6 7 8=(5+6) 9=(3x8)=A

11 A Fluorescent

Microscope

1 Nos

0.00

Non

All taxes

Per unit Non

Total Cost in INR


Page 107 of 119

Comprehensive

Annual

Maintenance

Charges (AMC)

per unit

& levies

excluding

service

tax per

unit

Comprehensive

Annual Maintenance

Charges (AMC)


levies excluding


1 2 3 4 5 6 7=5+6 8=3X7= B

11 B Fluorescent

Microscope

1 1st

year

0.000 0.000 0.00

2nd

year

0.000 0.000 0.000

3rd

year

0.000 0.000 0.000

4th 0.000 0.000 0.000

5th

year

0.00 0.00 0.00

Total AMC

cost

0.00 0.00

Average

AMC cost for

5 years

0.00 0.00


(A+B)

0.00

Total in Words (A+B)


Page 108 of 119

Note:-






Page 109 of 119

ANNEXURE-13: DRAFT AGREEMENT FORMAT{to be mutually signed by selected

bidder and procuring entity}

This Contract is made and entered into on this ______day of ________, 2017 by and

between Joint Director ,Agriculture (Q.C.),Department of Agriculture, Govt. of Rajasthan,

having its office at Durgapura, Jaipur-302018, Rajasthan (herein after referred to as

Purchaser/ Department of Agriculture) which term or expression, unless excluded by or

repugnant to the subject or context, shall include his successors in office and assignees on

ONE PART

And

M/s__________________, a company registered under _______________ with its

registered office at _____________________ (herein after referred as the “Successful

Bidder/ Supplier”) which term or expression, unless excluded by or repugnant to the subject

or context, shall include his successors in office and assignees on the OTHER PART.

And whereas

The supplier represents that it has the necessary experience for carrying out the overall

work as referred to herein and has submitted a bid and subsequent clarifications for

providing the required services against said NIB and RFP document issued in this regard, in

accordance with the terms and conditions set forth herein and any other reasonable

requirements of the Purchaser from time to time.

And whereas

The supplier has deposited a sum of Rs. ________________/- (Rupees

_________________) in the form of __________________ ref no. _________________

dated ______________ of ____________ Bank and valid up to _____________ as security

deposit for the due performance of the contract.

Now it is hereby agreed to by and between both the parties as under: -

1. The NIB Ref. No. ____________________________ dated ___________ and RFP

document dated _________ issued by JDag.(Q.C.), Department of Agriculture along with

its enclosures/ annexures, wherever applicable, are deemed to be taken as part of this

contract and are binding on both the parties executing this contract.

2. In consideration of the payment to be made by Jdag.(Q.C.), Department of Agriculture to

supplier at the rates set forth in the schedule here appended approved supply will duly

supply the said articles set forth in thereof and provide related services in the manner set

forth in the RFP, along with its enclosures/annexures and Technical Bid along with

subsequent clarifications submitted by supplier.

3. Jdag.(Q.C.),The Department of Agriculture do hereby agree that if supplier shall duly

supply the said articles and provide related services in the manner aforesaid observe

and keep the said terms and conditions of the RFP and Contract, the Jdag.(Q.C.),

Department of Agriculture will pay or cause to be paid to supplier, at the time and the

manner set forth in the said conditions of the RFP, the amount payable for each and

every project milestone & deliverable. The mode of Payment will be as specified in the

RFP document.

4. The timelines for the prescribed Scope of Work, requirement of services and deployment

of technical resources shall be affected from the date of work order i.e. ____________

and completed by supplier within the period as specified in the RFP document.


Page 110 of 119

5. Letter Nos. ----------------------------- dated ------------------------ received from Bidder and

Letter no. F6(

6. In case of extension in the delivery and/completion period with liquidated damages, the

recovery shall be made on the basis of following percentages of value of stores/ works

which supplier has failed to supply/ install/ complete: -

a) Delay up to one fourth period of the prescribed delivery period. 2.5%

b) Delay exceeding one fourth but not exceeding half of the prescribed

delivery period. 5.0%

c) Delay exceeding half but not exceeding three fourth of the prescribed

delivery period. 7.5%

d) Delay exceeding three fourth of the prescribed delivery period. 10.0%

Note:

i. Fraction of a day in reckoning period of delay in supplies/ maintenance services

shall be eliminated if it is less than half a day.

ii. The maximum amount of agreed liquidated damages shall be 10%.

iii. If supplier requires an extension of time in completion of contractual supply on

account of occurrence of any hindrances, he shall apply in writing to the authority

which had placed the work order, for the same immediately on occurrence of the

hindrance but not after the stipulated date of completion of supply.

iv. Delivery period may be extended with or without liquidated damages if the delay in

the supply of goods in on account of hindrances beyond the control of supplier.

7. All disputes arising out of this agreement and all questions relating to the interpretation of

this agreement shall be decided as per the procedure mentioned in the RFP document.

In witness whereof the parties have caused this contract to be executed by their Authorized

Signatories on this _____day of _______________, 2017.

Signed By: Signed By:

()

Designation:,

Company:

(Authorized Signatory)

Jdag.(Q.C.),Department of Agriculture,

Govt. of Rajasthan

In the presence of:

In the presence of:

()

Designation:

Company:

()

Designation:


Govt. of Rajasthan

( )

Designation:

Company:

()

Designation:


Govt. of Rajasthan


Page 111 of 119

ANNEXURE-14: MEMORANDUM OF APPEAL UNDER THE RTPP ACT, 2012

Appeal No ………of ……………

Before the ………………………… (First/ Second Appellate Authority)

1. Particulars of appellant:

a. Name of the appellant: <please specify>

b. Official address, if any: <please specify>

c. Residential address: <please specify>

2. Name and address of the respondent(s):

a. <please specify>

b. <please specify>

c. <please specify>

3. Number and date of the order appealed against and name and designation of the officer/

authority who passed the order (enclose copy), or a statement of a decision, action or

omission of the procuring entity in contravention to the provisions of the Act by which the

appellant is aggrieved:<please specify>

4. If the Appellant proposes to be represented by a representative, the name and postal

address of the representative:<please specify>

5. Number of affidavits and documents enclosed with the appeal:<please specify>

6. Grounds of appeal (supported by an affidavit):<please specify>

7. Prayer:<please specify>

Place …………………………………….

Date ……………………………………

Appellant's Signature


Page 112 of 119

ANNEXURE-15: BANK GUARANTEE FORMAT

{to be submitted by the bidder’s bank}

BANK GUARANTEE FORMAT – BID SECURITY

(To be stamped in accordance with Stamp Act and to be issued by a Nationalised/

Scheduled bank having its branch at Jaipur and payable at par at Jaipur, Rajasthan)

Guarantee No. ..............

Amount of Garantee. .................

To,

The Joint Director Agriculture,(Q.c.)


Durgapura, Jaipur.

Sir,

1. In accordance with your Notice Inviting Bid for <please specify the project title> vide NIB

reference no. <please specify> M/s. …………………………….. (Name & full address of

the firm) (Hereinafter called the “Bidder”) hereby submits the Bank Guarantee to

participate in the said procurement/ bidding process as mentioned in the bidding

document.

It is a condition in the bidding documents that the Bidder has to deposit Bid Security

amounting to <Rs. ______________ (Rupees <in words>)> in respect to the NIB Ref.

No. _______________ dated _________ issued by Jdag.(Q.C.), Department of

Agriculture, Durgapura , Jaipur, Rajasthan (hereinafter referred to as Jdag.(Q.C.),

“DoA”) by a Bank Guarantee from a Nationalised Bank/ Scheduled Commercial Bank

having its branch at Jaipur irrevocable and operative till the bid validity date (i.e.

<please specify> days from the date of submission of bid). It may be extended if

required in concurrence with the bid validity.

And whereas the Bidder desires to furnish a Bank Guarantee for a sum of <Rs.

______________ (Rupees <in words>)> to the Jdag.(Q.C.),DoA as earnest money

deposit.

2. Now, therefore, we the ……………………………….…… (Bank), a body corporate

constituted under the Banking Companies (Acquisition and Transfer of Undertaking) Act.

1969 (delete, if not applicable) and branch Office at…………………... (Hereinafter

referred to as the Guarantor) do hereby undertake and agree to pay forthwith on

demand in writing by the Jdag.(Q.C.), DoA of the said guaranteed amount without any

demur, reservation or recourse.

3. We, the aforesaid bank, further agree that the Jdag.(Q.C.),DoA shall be the sole judge

of and as to whether the Bidder has committed any breach or breaches of any of the

terms costs, charges and expenses caused to or suffered by or that may be caused to

or suffered by the DoA on account thereof to the extent of the Earnest Money required

to be deposited by the Bidder in respect of the said bidding document and the decision

of the Jdag.(Q.C.),DoA that the Bidder has committed such breach or breaches and as

to the amount or amounts of loss, damage, costs, charges and expenses caused to or


Page 113 of 119

suffered by or that may be caused to or suffered by the Jdag.(Q.C.),DoA shall be final

and binding on us.

4. We, the said Bank further agree that the Guarantee herein contained shall remain in full

force and effect until it is released by the Jdag.(Q.C.),DoA and it is further declared that

it shall not be necessary for the DOA to proceed against the Bidder before proceeding

against the Bank and the Guarantee herein contained shall be invoked against the

Bank, notwithstanding any security which the Jdag.(Q.C.), DoA may have obtained or

shall be obtained from the Bidder at any time when proceedings are taken against the

Bank for whatever amount that may be outstanding or unrealized under the Guarantee.

5. Any notice by way of demand or otherwise hereunder may be sent by special courier,

telex, fax, registered post or other electronic media to our address, as aforesaid and if

sent by post, it shall be deemed to have been given to us after the expiry of 48 hours

when the same has been posted.

6. If it is necessary to extend this guarantee on account of any reason whatsoever, we

undertake to extend the period of this guarantee on the request of our constituent under

intimation to you.

7. The right of the Jdag.(Q.C.),DoA to recover the said amount of <Rs. ______________

(Rupees <in words>)> from us in manner aforesaid will not be precluded/ affected, even

if, disputes have been raised by the said M/s. ……….………………(Bidder) and/ or

dispute or disputes are pending before any court, authority, officer, tribunal, arbitrator(s)

etc..

8. Notwithstanding anything stated above, our liability under this guarantee shall be

restricted to <Rs. ______________ (Rupees <in words>)> and our guarantee shall

remain in force till bid validity period i.e. <please specify> days from the last date of bid

submission and unless a demand or claim under the guarantee is made on us in writing

within three months after the Bid validity date, all your rights under the guarantee shall

be forfeited and we shall be relieved and discharged from all liability there under.

9. This guarantee shall be governed by and construed in accordance with the Indian Laws

and we hereby submit to the exclusive jurisdiction of courts of Justice in India for the

purpose of any suit or action or other proceedings arising out of this guarantee or the

subject matter hereof brought by you may not be enforced in or by such count.

10. We hereby confirm that we have the power/s to issue this Guarantee in your favour

under the Memorandum and Articles of Association/ Constitution of our bank and the

undersigned is/are the recipient of authority by express delegation of power/s and

has/have full power/s to execute this guarantee under the Power of Attorney issued by

the bank in your favour.

Date ………………… (Signature) ……………………………………….

Place ………………… (Printed Name) ………………………………….

(Designation) ……………………………………

(Bank’s common seal) ………………………….

In presence of:

WTTNESS (with full name, designation, address & official seal, if any)


Page 114 of 119

(1) ………………………………………

………………………………………

(2) ………………………………………

………………………………………

Bank Details

Name & address of Bank:

Name of contact person of Bank:

Contact telephone number:

GUIDELINES FOR SUBMISSION OF BANK GUARANTEE

The Bank Guarantee shall fulfil the following conditions in the absence of which they cannot

be considered valid: -

1. Bank Guarantee shall be executed on non- judicial stamp paper of applicable value

purchased in the name of the bank.

2. Two persons should sign as witnesses mentioning their full name, designation, address

and office seal (if any).

3. The Executor (Bank Authorities) may mention the power of attorney No. and date of

execution in his/ her favour authorizing him/ her to sign the document. The Power of

Attorney to be witnessed by two persons mentioning their full name and address.

4. The Bank Guarantee should be executed by a Nationalised Bank/ Scheduled

Commercial Bank only.

5. Non – Judicial stamp paper shall be used within 6 months from the date of Purchase of

the same. Bank Guarantee executed on the non-judicial stamp paper after 6 (six)

months of the purchase of such stamp paper shall be treated as non-valid.

6. The contents of Bank Guarantee shall be strictly as per format prescribed by

Jdag.(Q.C.),DoA

7. Each page of Bank Guarantee shall bear signature and seal of the Bank and B.G.

number.

8. All corrections, deletions etc. in the Bank Guarantee should be authenticated by

signature of Bank Officials signing the Bank Guarantee.

9. Bank should separately send through registered post/courier a certified copy of Bank

Guarantee, mentioning Bid reference, Bid title and bidder name, directly to the

Purchaser at the following address:


Page 115 of 119

ANNEXURE-16: BANK GUARANTEE FORMAT – PERFORMANCE SECURITY (PBG)

(To be stamped in accordance with Stamp Act and on a Stamp Paper purchased from

Rajasthan State only and to be issued by a Nationalised/ Scheduled bank having its branch

at Jaipur and payable at par at Jaipur, Rajasthan)

Gurantee No....................................

Amount of Guarantee Rs..........................

Guarantee cover from..........................to ...............

Last date of lodgement of claim ...........................

To,

TheJoint Director of Agriculture,(Q.C.)


Durgapura, Jaipur.

1. In consideration of the Department of Agriculture (hereinafter called Jdag.(Q.C.), “DoA”)

having agreed to exempt M/s ..........................(hereinafter called “the said Contractor(s)”

from the demand, under the terms and conditions of an Agreement

No..................................dated .....................made between the Jdag.(Q.C.),DoA through

…………………… and .......................(Contractor) for the work .................(hereinafter

called “the said Agreement”) of Security Deposit for the due fulfilment by the said

Contractor (s) of the terms and conditions contained in the said Agreement, on

production of a Bank Guarantee for Rs...................(rupees

........................................only), we ...................(indicate the name of the Bank),

(hereinafter referred to as “the Bank”) at the request of ..................Contractor(s) do

hereby undertake to pay to the Jdag.(Q.C.), DoA an amount not exceeding

Rs...................(Rupees..................................only) on demand.

2. We................. (Indicate the name of Bank), do hereby undertake to pay Rs....................

(Rupees............................only), the amounts due and payable under this guarantee

without any demur or delay, merely on a demand from the Jdag.(Q.C.), DoA. Any such

demand made on the bank by the Jdag.(Q.C.), DoA shall be conclusive as regards the

amount due and payable by the Bank under this guarantee. The Bank Guarantee shall

be completely at the disposal of the Jdag.(Q.C.), DoA and We....................... (Indicate

the name of Bank), bound ourselves with all directions given by Jdag.(Q.C.),DoA

regarding this Bank Guarantee. However, our liability under this guarantee shall be

restricted to an amount not exceeding Rs...................... (Rupees....................only).

3. We.......................(indicate the name of Bank), undertake to pay to the Jdag.(Q.C.), DoA

any money so demanded notwithstanding any dispute or disputes raised by the

contractor(s) in any suit or proceeding pending before any Court or Tribunal or Arbitrator

etc. Relating thereto, our liability under these presents being absolute, unequivocal and

unconditional.

4. We.....................(indicate the name of Bank) further agree that the performance

guarantee herein contained shall remain in full force and effective up to <DATE> and

that it shall continue to be enforceable for above specified period till all the dues of

Jdag.(Q.C.),DoA under or by virtue of the said Agreement have been fully paid and its

claims satisfied or discharged or till the Jdag.(Q.C.), DoA certifies that the terms and


Page 116 of 119

conditions of the said Agreement have been fully and properly carried out by the said

Contractor(s) and accordingly discharges this guarantee.

5. We ...........................(indicate the name of Bank) further agree with the Jdag.(Q.C.), DoA that the

Jdag.(Q.C.), DoA shall have the fullest liberty without our consent and without affecting in any

manner our obligations hereunder to vary any of the terms and conditions of the said Agreement

or to extend time of performance by the said Contractor(s) from time to time or to postpone for

any time or from time to time any of the powers exercisable by the Jdag.(Q.C.),DoA against the

said Contractor(s) and to forbear or enforce any of the terms and conditions relating to the said

Agreement and we shall not be relieved from our liability by reason of any such variation, or

extension being granted to the said Contractor(s) or for any forbearance, act or omission on the

part of the Jdag.(Q.C.),DoA or any indulgence by the Jdag.(Q.C.),DoA to the said Contractor(s) or

by any such matter or thing whatsoever which would but for this provision, have effect of so

relieving us.

6. The liability of us ............................. (indicate the name of Bank), under this guarantee will not be

discharged due to the change in the constitution of the Bank or the contractor(s).

7. We .............................. (indicate the name of Bank), lastly undertake not to revoke this guarantee

except with the previous consent of the Jdag.(Q.C.), DoA in writing.

8. This performance Guarantee shall remain valid and in full effect, until it is decided to be

discharged by the Jdag.(Q.C.),DoA. Notwithstanding anything mentioned above, our liability

against this guarantee is restricted to Rs........................... (Rupees..............................only).

9. It shall not be necessary for the Jdag.(Q.C.), DoA to proceed against the contractor before

proceeding against the Bank and the guarantee herein contained shall be enforceable against the

Bank notwithstanding any security which the Jdag.(Q.C.), DoA may have obtained or obtain from

the contractor.

10. We .............................. (indicate the name of Bank) verify that we have a branch at Jaipur. We

undertake that this Bank Guarantee shall be payable at any of its branch at Jaipur. If the last day

of expiry of Bank Guarantee happens to be a holiday of the Bank, the Bank Guarantee shall

expire on the close of the next working day.

11. We hereby confirm that we have the power(s) to issue this guarantee in your favor under the

memorandum and articles of Association/constitution of our bank and the undersigned is/are the

recipient of authority by express delegation of power(s) and has/have full power(s) to execute this

guarantee for the power of attorney issued by the bank.

Dated..........................day of....................For and on behalf of the <Bank> (indicate the Bank)

Signature

(Name & Designation)

Bank’s Seal

The above performance Guarantee is accepted by the Jdag.(Q.C.),DOA

For and on behalf of the DOA

Signature

(Name & Designation)


Page 117 of 119

Annexure 17: Cost of the total Items with Earnest Money:

S.N. Name of the

Instrument

Quantity Estimated

Cost of the

unit item

Total cost Required

Earnest

Money

Delivery

Period

1

Gas Liquid

Chromatograph

with

Computer

Laser Printer

Gas Purification

Unit

Gas Cylinder (

Nitrogen ,

Hydrogen , Air)

Bracket for

cylinder holding

6 Nos, cylinder

trolley (1 No)

Hamilton Liquid

syringe 10 µl

capacity 5 Nos.

Coulmns :-

1 . 5% OV 101 - 100

cm. n 50 cm.

2. 3%OV 101 - 100

cm

3. 3%Dexyl 300

Chroms.

4. SE 30 SS

5. OV - 210 , 17

6. Fused silica

Capillary column -

30meter X0.25mm

i.d.X 0.25um film

One Set 1600000 1600000 32000 10 Days


Page 118 of 119

thickness trb-5 or

equivalent

2 Analytical Balance 1 100000

100000

2000

10 Days

3 Top Pan Balance 1 25000 25000 500 10Days

4 Sonicator 1 40000 40000 800 10Days

5

UV - VIS

Spectrophotometer

1 250000 250000 5000 10Days

6 Air Conditioner 1 50000 50000 1000 10Days

7

Distilled Water

Plant (S.S.)

1 10000 10000 200 10Days

8 Refrigerator 2 25000 50000 1000 10Days

9 Photocopier 1 100000 100000 2000 10Days

10

ELISA (Enzyme

Linked Immune

Sorbent Assay

1 700000 700000 14000 10Days

11

Fluorescent

Microscope with

phase contrast

attachment

1 1092000 1092000 21840 10Days


Page 119 of 119

Annexure 18: List of Locations where the equipments are to be supplied

S.N. Name ofequipments Name and address of the laboratory

1

Gas Liquid Chromatograph with

Computer

Laser Printer

Gas Purification Unit

Gas Cylinder ( Nitrogen , Hydrogen , Air)

Bracket for cylinder holding 6 Nos, cylinder trolley

(1 No)

Hamilton Liquid syringe 10 µl capacity 5 Nos

Coulmns :-

1 . 5% OV 101 - 100 cm. n 50 cm.

2. 3%OV 101 - 100 cm

3. 3%Dexyl 300 Chroms.

4. SE 30 SS

5. OV - 210 , 17

6. Fused silica Capillary column -30meter X0.25mm

i.d.X 0.25um film thickness trb-5 or equivalent

SPTL,BHARATPUR

2 Analytical Balance

3 Top Pan Balance

4 Sonicator

5 UV - VIS Spectrophotometer

6 Air Conditioner

7 Distilled Water Plant (S.S.)

8 Refrigerator

9 Photocopier

10 ELISA (Enzyme Linked Immune Sorbent Assay SBPTL,DURGAPURA,Jaipur

11

Fluorescent Microscope with phase contrast

attachment

Date post:	26-Jul-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times