Date post: | 14-Jan-2016 |
Category: |
Documents |
Upload: | lizeth-milby |
View: | 216 times |
Download: | 0 times |
JM RhinoPlate Overview
JM RhinoPlate Roofing Concept
• INDUCTION– Electromagnetic induction
is an invisible force used to generate heat in a conductor
– This heat can be used to activate a powerful bond between thermoplastic roofing materials and coated plates, without penetrating the membrane
– Induction heating is used safely in many industrial and consumer applications
Components
• RhinoPlate Welder• Magnetic cooling
clamps– Set of 6 / tool
• JM RhinoPlates– TPO
• JM Roofing Fasteners
Five Steps to a Better Roof
• Install Insulation… screw down with coated RhinoPlates
• Roll out the Membrane…• Weld Seams… with
standard tool• Attach Field… at each
insulation fastener with RhinoBond tool
• Clamp In Place… squeeze membrane – only 1 minute and its totally secure
System ComparisonTraditional System• 10’ Roofing Membrane: field• 5’ Roofing membrane: 15’ from
parapet in perimeter zone.• Insulation attachment: 6/per board
using standard plate • Membrane attachment: Seams
mechanically Fastened 6” O.C.• Seam attachment; Heat welded end
laps• Corner zone attachment: Half-
sheets and additional fastening required in corners
• Meets FM 1-90 requirements
Rhinoplate System• 10’ Roofing Membrane: field and
perimeter zones• Insulation attachment: 6/board using
Rhinoplate• Membrane attachment: Membrane
inducted to Insulation plates• Seam attachment: Heat welded end
laps• Corner zone attachment: Additional
plates required in insulation only.• Meets FM 1-90 requirements
JM RhinoPlate Advantages
• No seam fasteners / No penetrations• No half sheets / Fewer seams• 25-50% fewer fasteners• Best in class wind uplift resistance• Dry-in larger areas faster• Even load distribution• Reduced flutter (not dependent on sheet width)• Great looking roof!
The JM RhinoPlate Advantage
RhinoPlate distributes wind loads evenly across the roof
High Performance
RhinoPlate resists over 500 pounds of force
Performance is Proven
UEATC and Dynamic Testing
RhinoPlate is SAFER & GREENER
1. No adhesives… eliminates solvents and pollutants
2. No fumes… stops complaints from people using the facility
3. No hazardous materials… Removes logistics hassles storing flammables
JM RhinoPlate Recap
• Reduces fasteners• Eliminates half sheets• Gets rid of flutter• Drys-in faster• Works from 0 - 120F• Environmentally friendly
Thank you