Date post: | 07-Apr-2016 |
Category: |
Documents |
Upload: | konstantinos-kokologiannis |
View: | 213 times |
Download: | 0 times |
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs.
Danpatherm K7 Danpatherm K7 is a unique pre-assembled building system offering excellent light transmission and thermal insulation. Composed of two skins of Danpalon® separated by an air gap, Danpatherm K7 achieves high thermal performances with U-values as low as 0.39W/m2K whilst providing an excellent aesthetic. Each Danpatherm K7 module is cut to size and assembled in the factory to match the individual building requirements and constraints. The system may also be delivered to site in sequential order of installation reducing site cutting, waste and greatly increasing the efficiency of the installation process. Depending on the level of thermal insulation required, an additional translucent insulation fiber may be incorporated for increased thermal performance. This insulation is inserted inside the module without any additional labor required on site.
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs.
Market needs
• Energy saving
• High quality glazing products
• Clean appearance
• Fast and easy installation
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Energy saving
• 40% of the worlds energy consumption is used in buildings*.
• Roughly 40% of heat and cold in buildings comes in/out through windows**
* According to the IEA (international energy agency)
** American Solar Energy Society (ASES)
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Energy saving
According to the guidelines given by the DIN 4701 standard, an average annual saving of between 0.9-1.3 liters of oil per m² of glazing area will be obtained by decreasing the U-value by 0.1W/m² K.
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
High quality glazing products.
Better control over final outcome.
Unprofessional installer.
Weather interruptions.
Unitized system – require no further additions.
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Clean appearance
• No visible structure from outside or inside.
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Fast and easy installation
• Quick and easy to install
• Reducing labor costs and construction times
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
DPT 12mm Honeycomb panel
Aluminum glazing bars
Unitized High Insulation System For Facade
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
U value – per customer needs between 1.2 to 0.39
Unitized High Insulation System For Facade
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Thermal break Frame
Purlin’s connection
Unitized High Insulation System For Facade
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Product Description
Air gap + Light Diffuser Air gap + Polycarbonate sheets Air gap only Type of insulation
12+12+LD 12+12+ up to 7 layers of 6 mm PC sheets 12mm+12mm Walls structure
12mm Honeycomb panels, forming double glazing Structure
120 mm Thickness
603 mm Module for installation
Standard up to 8 meters Length
Down to 0.52 Down to 0.39 (7 layers) 1.2 U value
24% 19% 46% Light transmission
300 [KG\m2] Load resistance
Up to 3 meter Span between supports
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Main Advantages
• Exceptional thermal insulation
• U value can be adjusted to project’s needs • Factory Prefabricated unit
• Quick and easy to install
Danpatherm K12
Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Main Advantages
• Soft, diffused light
• Excellent spanning capabilities and load resistance
• No visible aluminium except frame
• Superior protection against water and air infiltration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Specification Points
• Excellent U value
• Large Distance between supports
• Unitized glazing system
• Absolute Water and Air infiltration proof
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Inspiration
Inspiration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Inspiration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Inspiration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Inspiration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Inspiration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Inspiration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Inspiration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Inspiration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
Inspiration
Inspiration
Danpatherm K12 Unitized System
Danpatherm is a unique, factory assembled building system designed to achieve high thermal performance, good light transmission and superb spanning capability. Danpatherm system is easy to install and can be factory cut or raked on-site for more challenging designs
j n christofides lighting limited 3, elenis palaiologis street, 1016 – nicosia, cyprus
t. +357 22813043 www.jnc.com.cy