Job Name Contractor Job Location Wholesaler Engineer ... Fittings for HVACR... · Job Name...

page 1 of 7Distributed by Mueller Streamline Co. • 8285 Tournament Drive, Memphis, TN 38125 • 800-846-9750 • www.muellerindustries.com

Product Description: Streamline® Wrot Copper fittings for use in refrigeration applications. Available sizes ranging from ¼” to 8-1/8” in outside diameter. Product is designed to join ASTM B280 and ASTM B88 seamless copper tube.

Material:Streamline® Wrot Copper fittings shall be made from material in compliance with ASTM B75 and of UNS C12200 grade of copper.

Key Specifications:Streamline® Wrot Copper, solder-joint, pressure fittings shall conform to ASME B16.22 and MSS SP104. Streamline® Wrot Copper, solder-joint, pressure fittings are third party verified in select sizes1 through Underwriters Laboratories (UL) for operating pressure of 700psi at 250°F.

Installation:Installations shall comply with the latest applicable building codes for the local jurisdiction. For detailed installation instructions, consult the Copper Developement Association at copper.org.

References:

Product Line Product Type Diameter

Copper FittingsStreamline® Wrot Solder-Joint Pressure 1/8” – 2-5/8”

*700PSI at 250°F in seclect patterns

ASTM B75 Seamless Copper TubeC12200 99.9% Pure Copper ASME B16.22 Wrot Copper and Copper Alloy Solder Joint Pressure FittingsMSS SP104 Wrot Copper Solder and Joint Pressure Fittings

Other Applicable StandardsASTM B88 Seamless Copper Water and Gas Tube (Types K, L, M)ASTM B280 Seamless Copper Tube for Air Conditioning and Refrigeration

COPPER FITTINGS FOR HVACR APPLICATIONSJob Name Contractor

Job Location Wholesaler

Engineer Streamline® Rep

1


COPPER FITTINGS – HVACRSOLDER JOINT PRESSURE WROT & CAST

NOTE: ALL SIZES ARE ODADAPTER

FEMALEWC-402

C x F 1 2

Part Size Box Ctn Wt

W 01204 1/4 x 1/2 100 300 0.1W 01205 x 3/8 100 700 0.05W 01206 x 1/4 100 900 0.04W 01207 x 1/8 100 1,500 0.04W 01214 3/8 x 3/8 50 750 0.06W 01215 x 1/4 50 750 0.04W 01216 x 1/8 100 1,500 0.03W 01223 1/2 x 3/4 50 300 0.16W 01224 x 1/2 50 500 0.1W 01225 x 3/8 50 750 0.07W 01226 x 1/4 50 750 0.06W 01230 5/8 x 3/4 25 250 0.16W 01231 x 1/2 50 500 0.1W 01232 x 3/8 50 500 0.07W 01233 x 1/4 50 500 0.06W 01238 3/4 x 3/4 50 500 0.15W 01239 x 1/2 50 500 0.09W 01245 7/8 x 1 25 250 0.27W 01246 x 3/4 25 250 0.14W 01247 x 1/2 25 250 0.11W 01261 1-1/8 x 1-1/4 10 100 0.28W 01263 x 1 25 250 0.25W 01264 x 3/4 25 250 0.22W 01265 x 1/2 20 200 0.25W 01270 1-3/8 x 1-1/2 10 100 0.5W 01271 x 1-1/4 10 100 0.45W 01272 x 1 10 100 0.33W 01278 1-5/8 x 2 – 60 0.74W 01279 x 1-1/2 10 100 0.53W 01280 x 1-1/4 5 50 0.39W 01287 2-1/8 x 2 – 50 0.57W 01288 x 1-1/2 5 50 0.74W 01296 2-5/8 x 2-1/2 – 25 1.22W 01297 3-1/8 x 3 – 15

ADAPTERFITTINGWC-405

FTG x F 1 2


W 01514 3/8 x 3/8 50 750 0.06W 01524 1/2 x 1/2 50 350 0.1W 01525 x 3/8 50 750 0.05W 01526 x 1/4 50 750 0.06W 01531 5/8 x 1/2 50 450 0.11W 01532 x 3/8 50 750 0.07W 01546 7/8 x 3/4 25 250 0.17W 01547 x 1/2 50 500 0.11W 01563 1-1/8 x 1 25 250 0.24W 01564 x 3/4 25 250 0.18W 01571 1-3/8 x 1-1/4 10 100 0.4W 01579 1-5/8 x 1-1/2 10 100 0.46W 01587 2-1/8 x 2 – 50 0.65W 01596 2-5/8 x 2-1/2 – 25 1.2

ADAPTERMALE WC-401

C x M 1 2

Part Size Box Ctn WtW 01105 † 1/4 x 3/8 50 750 0.06W 01106 † x 1/4 50 1,200 0.03W 01107 † x 1/8 50 2,400 0.02W 01109 † 5/16 x 3/8 50 800 0.07W 01110 † x 1/4 50 1,200 0.03W 01113 † 3/8 x 1/2 50 500 0.08W 01114 † x 3/8 50 750 0.06W 01115 † x 1/4 50 1,200 0.03W 01116 † x 1/8 50 2,000 0.02W 01123 † 1/2 x 3/4 25 250 0.17W 01124 † x 1/2 50 500 0.09W 01125 † x 3/8 50 500 0.06

ADAPTER CONT.W 01126 † x 1/4 50 750 0.05W 01129 † 5/8 x 1 15 150 0.3W 01130 † x 3/4 25 250 0.17W 01131 † x 1/2 50 500 0.06W 01132 † x 3/8 50 500 0.07W 01133 † x 1/4 25 600 0.06W 01138 † 3/4 x 3/4 25 250 0.14W 01139 † x 1/2 25 250 0.12W 01145 † 7/8 x 1 10 100 0.29W 01146 † x 3/4 25 250 0.13W 01147 † x 1/2 25 250 0.12W 01161 † 1-1/8 x 1-1/2 10 100 0.48W 01162 † x 11/4 10 100 0.39W 01163 † x 1 10 100 0.24W 01164 † x 3/4 10 100 0.17W 01165 † x 1/2 10 100 0.18W 01170 † 1-3/8 x 1-1/2 10 100 0.48W 01171 † x 1-1/4 10 100 0.41W 01172 † x 1 10 100 0.24W 01173 † x 3/4 10 100 0.21W 01178 † 1-5/8 x 2 – 50 0.78W 01179 † x 1-1/2 10 100 0.51W 01180 † x 1-1/4 10 100 0.37W 01181 † x 1 10 100 0.38W 01187 † 2-1/8 x 2 5 50 0.57W 01188 † x 1-1/2 – 50 0.64W 01189 † x 1-1/4 – 50 0.57W 01196 † 2-5/8 x 2-1/2 – 20 1.26W 01197 † x 2 – 20 0.98W 01198 † x 1-1/2 – 22 0.98W 01199 3-1/8 x 3 – 20 1.7W 01150 4-1/8 x 4 – 16 3.71

ADAPTER

FITTINGWC-404

FTG x M 1 2


W 01425 † 1/2 x 3/8 50 750 0.05W 01431 † 5/8 x 1/2 50 500 0.09W 01432 † x 3/8 50 750 0.06W 01446 † 7/8 x 3/4 50 500 0.15W 01447 † x 1/2 50 500 0.13W 01463 † 1-1/8 x 1 25 250 0.23W 01464 † x 3/4 25 250 0.19W 01471 † 1-3/8 x 1-1/4 10 100 0.41W 01479 † 1-5/8 x 1-1/2 10 100 0.49W 01487 † 21/8 x 2 – 50 0.76W 01496 † 2-5/8 x 2-1/2 – 20 1.95

BUSHING

FLUSHWC-106

FTG x C 1 2


W 01706 † 3/8 x 1/4 100 4,000 0.01W 01712 † 1/2 x 3/8 100 4,000 0.01W 01714 † x 1/4 100 2,400 0.02W 01715 † 5/8 x 1/2 100 1,500 0.02W 01717 † x 3/8 100 1,500 0.04W 01720 † 3/4 x 5/8 50 750 0.03W 01721 † x 1/2 50 750 0.06W 01722 † x 3/8 50 750 0.08W 01725 † 7/8x 3/4 50 500 0.04W 01726 † x 5/8 50 500 0.07W 01727 † x 1/2 50 500 0.11W 01737 † 1-1/8 x 7/8 50 500 0.12W 01738 † x 3/4 50 500 0.18W 01739 † x 5/8 25 250 0.22W 01743 † 1-3/8 x 1-1/8 10 200 0.16W 01745 † x 7/8 10 200 0.3W 01750 † 1-5/8 x 1-3/8 10 100 0.22W 01751 † x 1-1/8 10 100 0.41W 01758 † 2-1/8 x 1-5/8 10 100 0.68W 01759 † x 1-3/8 5 50 0.94W 01767 † 2-5/8 x 2-1/8 – 50 0.92

BUSHINGFLUSHWC-417(BRASS)

FTG x F


A 07812 5/8 x 1/8 100 1,600 0.04A 07813 x 1/4 50 1,200 0.02A 07814 7/8 x 3/8 50 450 0.08A 07815 1-1/8 x 1/2 50 300 0.17A 07816 1-3/8 x 3/4 10 160 0.25A 07817 1-5/8 x 1 10 90 0.34A 07819 2-1/8 x 1-1/2 10 90 0.48

CAP

FLUSHWC-415

C


W 07002 1/4 50 2,000 0W 07004 3/8 50 2,000 0.01W 07006 1/2 50 1,000 0.01W 07007 5/8 100 1,000 0.02W 07008 3/4 50 2,000 0.03W 07009 7/8 50 500 0.04W 07011 1-1/8 50 500 0.08W 07012 1-3/8 25 250 0.11W 07013 1-5/8 25 250 0.18W 07014 2-1/8 – 100 0.3W 07015 2-5/8 – 50 0.48W 07016 3-1/8 – 50 0.73W 07017 3-5/8 – 25 1.15W 07018 4-1/8 – 20 1.5

COUPLING

NO STOPWC-400NS

C x C


W 01900 † 1/4 100 4,000 0W 01901 † 3/8 50 2,000 0.01W 01902 † 1/2 50 1,700 0.01W 01903 † 5/8 100 1,000 0.03W 01904 † 3/4 25 375 0.04W 01905 † 7/8 50 500 0.06W 01906 † 1-1/8 25 250 0.11W 01907 † 1-3/8 25 250 0.15W 01908 † 1-5/8 10 100 0.25W 01909 † 2-1/8 – 75 0.4W 01910 † 2-5/8 – 50 0.66W 01911 3-1/8 – 25 1.03W 01913 4-1/8 – 15 2.15

COUPLING

ROLLED STOPWC-400

C x C


W 01000 † 1/8 100 4,000 0W 01001 † 3/16 100 4,000 0W 01003 † 1/4 100 4,000 0W 01009 † 3/8 50 2,000 0.01W 01017 † 1/2 50 1,700 0.01W 01022 † 5/8 100 1,000 0.03W 01028 † 3/4 50 500 0.05W 01034 † 7/8 50 500 0.06W 01040 † 1 25 250 0.09W 01047 † 1-1/8 25 250 0.11W 01055 † 1-3/8 25 250 0.15W 01062 † 1-1/2 – 150 0.22W 01063 † 1-5/8 10 100 0.21W 01072 † 2-1/8 – 75 0.4W 01082 † 2-5/8 – 50 0.66W 01092 3-1/8 – 25 1.03W 10100 3-5/8 – 20 1.18W 10107 4-1/8 – 15 2.11

1 2

† UL Recognized to 700 PSI (select sizes)


COUPLING

STACKED STOPWC-400S

C x C


W 10141 † 1/4 100 3,400 0W 10142 † 5/16 100 5,600 0.01W 10143 † 3/8 50 2,000 0.01W 10144 † 1/2 50 1,700 0.01W 10145 † 5/8 100 1,000 0.03W 10157 † 3/4 25 500 0.04W 10146 † 7/8 50 500 0.06W 10147 † 1-1/8 25 250 0.11W 10148 † 1-3/8 25 250 0.15W 10149 † 1-5/8 10 100 0.22W 10150 † 2-1/8 – 75 0.41W 10151 † 2-5/8 – 50 0.66W 10152 3-1/8 – 25 1.02W 10153 3-5/8 – 20 1.03W 10154 4-1/8 – 15 2.15W 10155 5-1/8 – 8 3.34W 10156 6-1/8 – 3 4.61W 10130 8-1/8 – 1 14.13

COUPLING

REDUCINGWC-400R

C x C

1 2


W 01004 † 1/4 x 3/16 50 2,000 0.01W 01005 † x 1/8 50 2,000 0W 01010 † 3/8 x 5/16 50 1,700 0.01W 01011 † x 1/4 50 2,000 0.01W 01019 † 1/2 x 3/8 50 1,700 0.01W 01021 † x 1/4 50 1,200 0.02W 01023 † 5/8 x 1/2 100 1,000 0.03W 01025 † x 3/8 100 1,000 0.03W 01027 † x 1/4 100 1,000 0.03W 01029 † 3/4 x 5/8 100 600 0.05W 01030 † x 1/2 100 600 0.04W 01031 † x 3/8 100 600 0.04W 01035 † 7/8 x 3/4 100 1,000 0.06W 01036 † x 5/8 50 500 0.08W 01037 † 7/8 x 1/2 50 500 0.06W 01038 † x 3/8 50 500 0.06W 01049 † 1-1/8 x 7/8 25 250 0.13W 01050 † x 3/4 25 250 0.11W 01051 † x 5/8 25 250 0.11W 01052 † x 1/2 25 250 0.11W 01056 † 1-3/8 x 1-1/8 10 100 0.2W 01058 † x 7/8 10 100 0.17W 01060 † x 5/8 10 100 0.17W 01064 † 1-5/8 x 1-3/8 10 100 0.23W 01065 † x 1-1/8 10 100 0.23W 01067 † x 7/8 10 100 0.24W 01069 † x 5/8 10 100 0.22W 01073 † 2-1/8 x 1-5/8 – 100 0.43W 01074 † x 1-3/8 – 100 0.43W 01075 † x 1-1/8 – 100 0.46W 01077 † x 7/8 – 100 0.4W 01079 † x 5/8 – 75 0.41W 01083 † 2-5/8 x 2-1/8 – 50 0.65W 01084 † x 1-5/8 – 50 0.75W 01085 † x 1-3/8 – 50 0.7W 01086 † x 1-1/8 – 50 0.71W 01093 3-1/8 x 2-5/8 – 25 1.06W 01094 x 2-1/8 – 25 1.1W 01095 x 1-5/8 – 25 1.01W 10101 3-5/8 x 3-1/8 – 25 1.22W 10108 4-1/8 x 3-5/8 – 20 1.87W 10109 x 3-1/8 – 20 0.76W 10110 x 2-5/8 – 15 1.88W 10111 x 2-1/8 – 20 1.97

45º ELBOW

WE-504 C x C


W 03005 † 1/4 50 2,000 0.01W 03012 † 3/8 50 2,800 0.01W 03021 † 1/2 50 850 0.03W 03026 † 5/8 50 500 0.04W 03030 † 3/4 50 500 0.06W 03034 † 7/8 25 250 0.09W 03044 † 1-1/8 25 250 0.16W 03050 † 1-3/8 10 100 0.25W 03055 † 1-5/8 10 100 0.36W 03059 † 2-1/8 10 50 0.6W 03063 † 2-5/8 5 25 1W 03067 3-1/8 2 20 1.53W 03070 3-5/8 2 10 2.81W 03073 4-1/8 – 5 3.14

45º ELBOW

STREETWE-505

FTG x C


W 03312 † 3/8 100 3,400 0.01W 03321 † 1/2 100 1,500 0.03W 03326 † 5/8 50 500 0.03W 03330 † 3/4 50 500 0.06W 03334 † 7/8 25 250 0.09W 03344 † 1-1/8 25 250 0.15W 03350 † 1-3/8 10 100 0.24W 03355 † 1-5/8 10 100 0.33W 03359 † 2-1/8 5 50 0.61W 03363 † 2-5/8 2 20 1.05W 03368 3-1/8 2 10 1.52W 03373 4-1/8 – 5 3.11

45º ELBOW

WE-507 FTG x FTG


W 03621 † 1/2 50 1,700 0.02W 03626 † 5/8 50 750 0.04W 03634 † 7/8 25 250 0.1W 03644 † 1-1/8 10 100 0.18

90º ELBOW

SHORT RADIUSWE-500

C x C1

2


W 02003 † 1/4 50 2,000 0.01W 02009 † 3/8 50 1,700 0.02W 02017 † 1/2 50 1,000 0.03W 02022 † 5/8 100 1,000 0.05W 02028 † 3/4 50 500 0.08W 02034 † 7/8 50 500 0.11W 02040 † 1 20 200 0.22W 02047 † 1-1/8 25 250 0.24W 02084 † 1-3/8 10 100 0.3W 02085 † 1-5/8 10 100 0.42W 02086 † 2-1/8 10 50 0.76W 02087 † 2-5/8 5 25 1.19W 02088 3-1/8 5 25 1.88W 02089 3-5/8 2 10 2.77W 02090 4-1/8 2 10 4W 02097 6-1/8 – 1 13.73

REDUCING

W 02011 † 3/8 x 1/4 50 750 0.02W 02019 † 1/2 x 3/8 50 750 0.03W 02023 † 5/8 x 1/2 50 500 0.05W 02025 † x 3/8 50 500 0.05W 02029 † 3/4 x 5/8 50 500 0.06W 02030 † x 1/2 50 500 0.07W 02035 † 7/8 x 3/4 50 500 0.11W 02036 † x 5/8 50 500 0.11W 02037 † x 1/2 50 500 0.11W 02049 † 1-1/8 x 7/8 25 250 0.17W 02050 † x 3/4 25 250 0.16W 02051 † x 5/8 25 250 0.18W 02052 † x 1/2 25 150 0.2W 02056 † 1-3/8 x 1-1/8 20 200 0.32W 02077 † 1-5/8 x 1-3/8 5 100 0.33W 02078 † 2-1/8 x 1-5/8 5 50 0.6

90º ELBOW

LONG RADIUSWE-500L

C x C

1

2Part Size Box Ctn Wt

W 02701 † 3/16 50 1,000 0W 02715 † 1/4 50 2,000 0.01W 02710 † 5/16 50 1,700 0.01W 02716 † 3/8 50 1,700 0.02W 02717 † 1/2 50 500 0.04W 02722 † 5/8 50 500 0.06W 02728 † 3/4 50 500 0.09W 02734 † 7/8 25 250 0.13W 02747 † 1-1/8 10 100 0.27W 02055 † 1-3/8 10 100 0.42W 02063 † 1-5/8 5 50 0.6W 02072 † 2-1/8 5 25 1.23W 02082 † 2-5/8 5 25 2.05W 02092 3-1/8 2 10 3.13W 02093 3-5/8 1 5 5.53W 02095 4-1/8 – 1 7.98

REDUCING

W 02711 † 3/8 x 1/4 50 3,000 0.01W 02719 † 1/2 x 3/8 50 2,000 0.03W 02723 † 5/8 x 1/2 50 1,000 0.04W 02725 † x 3/8 50 1,000 0.03W 02735 † 7/8 x 3/4 25 250 0.12W 02736 † x 5/8 50 500 0.09W 02749 † 1-1/8 x 7/8 10 100 0.17W 02756 † 1-3/8 x 1-1/8 10 100 0.31W 02058 † x 7/8 10 100 0.37W 02060 † x 5/8 10 100 0.37W 02064 † 1-5/8 x 1-3/8 5 50 0.44W 02065 † x 1-1/8 5 50 0.52W 02067 † x 7/8 5 50 0.51W 02073 † 2-1/8 x 1-5/8 2 20 0.98W 02074 † x 1-3/8 2 20 0.94W 02075 † x 1-1/8 2 20 0.97W 02083 † 2-5/8 x 2-1/8 2 20 1.53

90º ELBOW

STREET SHORT RADIUSWE-503

FTG x C


W 02305 † 1/4 50 2,000 0.01W 02312 † 3/8 50 1,700 0.02W 02321 † 1/2 50 750 0.03W 02326 † 5/8 50 500 0.05W 02330 † 3/4 25 250 0.09W 02334 † 7/8 25 250 0.11W 02344 † 1-1/8 25 250 0.22W 02384 † 1-3/8 25 125 0.29W 02385 † 1-5/8 10 100 0.44W 02386 † 2-1/8 10 50 0.77W 02387 † 2-5/8 5 25 1.23W 02388 3-1/8 2 20 1.94W 02389 3-5/8 1 10 2.78W 02390 4-1/8 2 10 4.03

90º ELBOW

STREET LONG RADIUSWE-503L

FTG x C


W 02809 † 3/8 50 1,700 0.02W 02817 † 1/2 50 500 0.04W 02822 † 5/8 50 500 0.06W 02828 † 3/4 25 250 0.09W 02834 † 7/8 25 250 0.13W 02847 † 1-1/8 10 100 0.26W 02350 † 1-3/8 10 100 0.42W 02355 † 1-5/8 5 50 0.6W 02359 † 2-1/8 5 25 1.23W 02363 † 2-5/8 5 25 2.08W 02368 3-1/8 2 10 3.12W 02393 3-5/8 1 5 5.52W 02395 4-1/8 – 1 8.07



90º ELBOW

SHORT RADIUSWE-506

FTG x FTG


W 02612 † 3/8 50 2,800 0.02W 02621 † 1/2 50 750 0.03W 02626 † 5/8 50 500 0.05W 02634 † 7/8 25 250 0.11W 02644 † 1-1/8 10 100 0.22W 02684 † 1-3/8 10 100 0.31W 02685 † 1-5/8 5 50 0.43W 02686 † 2-1/8 1 10 0.79W 02687 † 2-5/8 1 10 1.25W 02688 3-1/8 1 10 2.08W 02689 3-5/8 1 10 2.63W 02690 4-1/8 1 5 3.88

90º ELBOW

LONG RADIUSWE-506L

FTG x FTG


W 02650 † 1-3/8 5 50 0.44W 02655 † 1-5/8 5 50 0.63W 02659 † 2-1/8 1 10 1.23

90º ELBOW

FORGED BRASSWE-502

C x F1

2


W 02206 1/4 x 1/4 50 450 0.1W 02207 x 1/8 50 800 0.07W 02214 3/8 x 3/8 50 600 0.1W 02216 x 1/8 50 700 0.08W 02225 x 3/8 25 300 0.11W 02226 x 1/4 25 350 0.1

90º ELBOW

FORGED BRASSWE-501

C x M1

2


W 02106 x 1/4 50 700 0.07W 02107 x 1/8 50 1,200 0.04W 02115 x 1/4 50 800 0.06W 02116 x 1/8 50 800 0.06W 02125 x 3/8 25 400 0.1W 02132 x 3/8 10 240 0.16

FITTING REDUCER

WC-403 FTG x C 1 2


REDUCINGW 01302 † 1/4 x 1/8 50 2,000 0W 01306 † 3/8 x 1/4 50 2,000 0.01W 01312 † 1/2 x 3/8 50 2,000 0.02W 01314 † x 1/4 50 2,800 0.01W 01315 † 5/8 x 1/2 50 750 0.03W 01317 † x 3/8 50 1,700 0.02W 01320 † 3/4 x 5/8 100 1,000 0.04W 01321 † x 1/2 100 900 0.04W 01322 † x 3/8 100 900 0.04W 01325 † 7/8 x 3/4 50 500 0.06W 01326 † x 5/8 50 500 0.06W 01327 † x 1/2 50 500 0.06W 01337 † 1-1/8 x 7/8 25 250 0.11W 01338 † x 3/4 25 250 0.1W 01339 † x 5/8 25 250 0.1W 01340 † x 1/2 20 200 0.1W 01343 † 1-3/8 x 1-1/8 10 100 0.17W 01345 † x 7/8 10 100 0.17W 01347 † x 5/8 10 100 0.16W 01350 † 1-5/8 x 1-3/8 10 100 0.23W 01351 † x 1-1/8 10 100 0.24W 01353 † x 7/8 10 100 0.23W 01355 † x 5/8 10 100 0.22W 01358 † 2-1/8 x 1-5/8 – 100 0.44W 01359 † x 1-3/8 – 100 0.43W 01360 † x 1-1/8 – 100 0.45W 01362 † x 7/8 – 100 0.43W 01364 † x 5/8 – 100 0.42

FITTING REDUCER (CONT.)Part Size Box Ctn Wt

W 01367 † 2-5/8 x 2-1/8 – 50 0.62W 01368 † x 1-5/8 – 50 0.57W 01369 † x 1-3/8 – 50 0.62W 01370 † x 1-1/8 – 50 0.63W 01376 † 3-1/8 x 2-5/8 – 25 1W 01377 x 2-1/8 – 25 0.89W 01379 x 1-3/8 – 50 1.01W 01381 3-5/8 x 3-1/8 – 20 1.28W 01382 x 2-5/8 – 20 1.37W 01383 x 2-1/8 – 20 1.47W 01386 4-1/8 x 3-5/8 – 20 1.74W 01387 x 3-1/8 – 15 1.77W 01388 x 2-5/8 – 15 1.83W 01389 x 2-1/8 – 15 1.86

HANGER

HI-EARW-124

C


A 03167 5/8 100 10,000 0.03A 03168 7/8 25 500 0.04A 03171 1-1/8 25 250 0.04

P-TRAP

SUCTION LINEWE-554P

C x C


W 60999 5/8 10 50 0.38W 61008 3/4 10 50 0.51W 61000 7/8 5 25 0.63W 61001 1-1/8 3 15 0.87W 61002 1-3/8 4 20 1.16W 61003 1-5/8 4 4 2.28W 61009 2-1/8 – 3 3.87

P-TRAP

SUCTION LINELONG RADIUSWE-554PL

C x C


W 60998 5/8 30 150 0.15W 60997 3/4 20 100 0.3W 60996 7/8 15 75 0.36W 60995 1-1/8 15 75 0.58W 60994 1-3/8 5 25 0.97W 60993 1-5/8 – 5 1.84W 60992 2-1/8 – 3 3.61

PLUG

FITTINGWC-416

FTG

(SIZES 1/8 THRU 11/2 BRASS ROD)


A 01402 1/4 50 500 0.01A 01422 3/8 100 4,000 0.01A 01392 1/2 50 2,000 0.02A 01504 5/8 50 1,200 0.03A 01529 7/8 50 600 0.07A 01556 1-1/8 25 375 0.12A 01590 1-3/8 15 180 0.2A 01628 1-5/8 10 120 0.28

RETURN BEND

WE-512 C x C


W 06025 3/8 x 4-1/2 25 150 0.1W 06020 x 1-1/2 25 850 0.02W 06048 1/2 x 6 – 100 0.21W 06045 x 4 – 200 0.14W 06041 x 3 25 250 0.11W 06036 x 2 50 300 0.06W 06035 x 12-9/32 50 300 0.08W 06032 x 1-1/2 50 500 0.06W 06069 5/8 x 6 5 30 0.3W 06062 x 3-3/8 10 100 0.18W 06060 x 3 25 150 0.16

RETURN BEND (CONT.)Part Size Box Ctn Wt

W 06058 x 2-1/2 25 250 0.14W 06056 x 2-1/4 25 250 0.13W 06053 x 1-7/8 25 250 0.11W 06051 x 19/16 25 250 0.1W 06084 3/4 x 4 – 120 0.25W 06081 x 3-3/8 10 90 0.24W 06077 x 2-1/2 10 100 0.17W 06074 x 2-1/8 10 100 0.16W 06073 x 2 10 100 0.15W 06099 7/8 x 12 – 15 0.88W 06095 x 3-3/8 10 100 0.29W 06092 x 2-1/2 10 100 0.23W 60111 1-1/8 x 3-1/4 5 50 0.49W 60110 x 3 5 50 0.47W 60121 1-3/8 x 3-3/4 5 50 0.65W 60131 1-5/8 x 4-1/2 5 25 1W 60140 2-1/8 x 5-1/2 5 25 1.92

TEE

WT-600 C x C x C


W 40302 † 3/16 50 1,700 0.01W 40306 † 1/4 100 2,400 0.01W 40313 † 5/16 50 1,700 0.01W 04000 † 3/8 50 1,700 0.02W 04001 † 1/2 50 500 0.04W 04006 † 5/8 50 500 0.07W 04017 † 3/4 25 250 0.12W 04031 † 7/8 25 250 0.16W 04048 † 1-1/8 10 100 0.29W 04068 † 1-3/8 5 50 0.42W 04084 † 1-5/8 5 50 0.6W 40102 † 2-1/8 5 25 1.14W 40123 † 2-5/8 2 20 1.72W 40152 3-1/8 2 10 2.77W 40190 3-5/8 1 5 5.66W 40200 4-1/8 1 5 5.99W 40400 5-1/8 – 1 12.38W 40500 6-1/8 – 1 20.85

REDUCINGW 40368 † 1/4x1/4x3/8 50 750 0.03W 40308 † x 3/16 50 2,000 0.01W 40334 † 5/16x5/16x3/8 50 750 0.03W 04016 † 3/8x3/8x5/8 50 500 0.08W 04005 † x 1/2 50 500 0.04W 40324 † x 1/4 50 1,700 0.02W 40330 † x 1/4 x 3/8 50 500 0.02W 40332 † x 1/4 50 1,700 0.02W 04015 † 1/2x1/2x5/8 50 500 0.09W 04002 † x 3/8 50 500 0.04W 40350 † x 1/4 50 500 0.04W 04003 † x 3/8x1/2 50 500 0.05W 04004 † x 3/8 50 500 0.04W 40358 † x 1/4 50 750 0.04W 40363 † x 1/4x1/2 50 750 0.05W 40364 † x 3/8 50 750 0.04W 40366 † x 1/4 50 450 0.05W 04067 † 5/8x5/8x1-1/8 10 100 0.35W 04047 † x 7/8 25 250 0.11W 04029 † x 3/4 25 250 0.1W 04007 † x 1/2 50 500 0.08W 04008 † x 3/8 50 500 0.06W 04014 † x 1/4 50 500 0.08W 04009 † x 1/2x5/8 50 500 0.09W 04010 † x 1/2 50 500 0.08W 04011 † x 3/8 50 500 0.08W 04012 † x 3/8x5/8 50 500 0.09W 40367 † x 1/2 50 500 0.08W 04013 † x 3/8 50 500 0.09W 04046 † 3/4x3/4x7/8 25 250 0.15W 04018 † x 5/8 25 250 0.1W 04019 † x 1/2 25 250 0.1W 04020 † x 3/8 25 250 0.1W 04021 † x 5/8x 3/4 25 225 0.13W 04022 † x 5/8 25 250 0.11W 04023 † x 1/2 25 225 0.11W 04025 † x 1/2x3/4 25 250 0.15W 04026 † x 5/8 25 225 0.14W 04027 † x 1/2 25 250 0.11W 04065 † 7/8x7/8x1-1/8 10 100 0.22



TEE (CONT.)Part Size Box Ctn Wt

W 04032 † x 3/4 25 250 0.17W 04033 † x 5/8 25 250 0.12W 04034 † 7/8x7/8x1/2 25 250 0.11W 04035 † x 3/8 25 250 0.11W 04036 † x 3/4 x 7/8 25 250 0.19W 04037 † x 3/4 25 250 0.17W 04041 † x 5/8 x 7/8 25 250 0.16W 04042 † x 3/4 25 150 0.17W 04043 † x 5/8 25 250 0.13W 04044 † x 1/2 25 250 0.12W 04045 † x 3/8 25 225 0.15W 40101 † 1-1/8x1-1/8x1-5/8 5 50 0.47W 04082 † x 1-3/8 5 50 0.31W 04049 † x 7/8 10 100 0.24W 04050 † x 3/4 10 100 0.27W 04051 † x 5/8 10 100 0.21W 04052 † x 1/2 10 100 0.19W 04055 † x 7/8x1-1/8 10 100 0.3W 04056 † x 7/8 10 100 0.25W 04057 † x 3/4 10 90 0.43W 04058 † x 5/8 10 100 0.23W 04059 † x 1/2 10 100 0.21W 40233 † x 3/4x11/8 10 100 0.33W 40234 † x 7/8 10 90 0.3W 40235 † x 3/4 10 100 0.31W 40236 † x 5/8 10 90 0.35W 04061 † x 5/8x1-1/8 10 100 0.3W 04062 † x 7/8 10 100 0.28W 04063 † x 5/8 10 100 0.21W 40122 † 1-3/8x1-3/8x2-1/8 2 20 0.89W 40100 † x 1-5/8 5 50 0.49W 04069 † x 1-1/8 5 50 0.41W 04070 † x 7/8 5 50 0.35W 04071 † x 5/8 5 50 0.32W 04072 † x 1/2 5 50 0.29W 04073 † x 1-1/8 x1-3/8 5 50 0.48W 04074 † x 1-1/8 5 50 0.46W 04075 † x 7/8 5 50 0.38W 04076 † x 5/8 5 50 0.36W 04078 † x 7/8 x 1-3/8 5 50 0.45W 04079 † x 1-1/8 5 50 0.46W 04080 † x 7/8 5 50 0.37W 04081 † x 5/8 5 50 0.34W 04083 † x 5/8 x 1-3/8 5 50 0.57W 40121 † 1-5/8x1-5/8x2-1/8 2 20 1.21W 04085 † x 1-3/8 5 50 0.57W 04086 † x 1-1/8 5 50 0.52W 04087 † x 7/8 5 50 0.47W 04088 † x 5/8 5 50 0.42W 04089 † x 1/2 5 50 0.41W 04090 † x 1-3/8x1-5/8 5 50 0.68W 04091 † x 1-3/8 5 50 0.69W 04092 † x 1-1/8 5 50 0.57W 04093 † x 7/8 5 50 0.57W 04094 † x 5/8 5 50 0.45W 04095 † x 1-1/8x1-5/8 5 50 0.68W 04096 † x 1-3/8 5 50 0.65W 04097 † x 1-1/8 5 50 0.61W 04098 † x 7/8 5 50 0.56W 40237 † x 5/8 5 30 0.45W 04099 † x 7/8 x 1-5/8 5 50 0.67W 40239 † x 1-3/8 5 50 0.75W 40240 † x 1-1/8 5 50 0.52W 40238 † x 7/8 5 50 0.55W 40243 † x 5/8 5 50 0.47W 40244 † x 5/8 x 15/8 5 50 0.66W 40153 † 2-1/8x2-1/8x3-1/8 1 10 2.55W 40144 † x 2-5/8 1 10 1.46W 40103 † x 1-5/8 5 50 0.99W 40104 † x 1-3/8 5 50 0.85W 40105 † x 1-1/8 5 50 0.88W 40106 † x 7/8 5 50 0.83W 40107 † x 5/8 5 50 0.67W 40108 † x 1/2 2 20 0.68W 40109 † x 1-5/8x2-1/8 2 20 1.31W 40110 † x 1-5/8 2 20 1.15W 40111 † x 1-3/8 2 20 0.86W 40112 † x 1-1/8 2 20 1.06W 40113 † x 7/8 2 20 0.75W 40114 † x 5/8 5 50 0.77W 40115 † x 1-3/8x2-1/8 2 20 1.3W 40116 † x 1-5/8 2 20 1.14W 40117 † x 1-3/8 2 20 1.09

TEE (CONT.)Part Size Box Ctn Wt

W 40118 † x 1-1/8 2 20 0.95W 40119 † x 7/8 5 50 0.76W 40120 † x 5/8 5 20 0.78W 40245 † x 1-1/8x2-1/8 5 25 1.64W 40247 † x 1-1/8 5 50 1.06W 40248 † x 7/8 x 2-1/8 5 25 1.71W 40249 † x 5/8 x 2-1/8 5 25 1.66W 40124 † 2-5/8x2-5/8x2-1/8 2 20 1.59W 40125 † x 1-5/8 2 20 1.49W 40126 † x 1-3/8 2 20 1.87W 40127 † x 1-1/8 2 20 1.83W 40128 † x 7/8 1 10 1.83W 40129 † x 5/8 1 10 2.05W 40130 † x 21/8x2-5/8 4 20 2.3W 40131 † x2-1/8 2 20 1.84W 40132 † x 1-5/8 4 20 2.09W 40133 † x 1-3/8 4 20 2.12W 40134 † x 1-1/8 4 20 2.1W 40135 † x 7/8 4 20 2.06W 40136 † x 5/8 4 20 2.2W 40137 † x 1-5/8x2-5/8 4 20 2.32W 40138 † x 2-1/8 4 20 1.84W 40139 † x 1-5/8 4 20 2.11W 40140 † x 1-3/8 4 20 2.17W 40141 † x 1-1/8 4 20 1.83W 40142 † x 7/8 4 20 2.36W 40143 † x 5/8 4 20 2.36W 40220 † x 1-3/8x2-5/8 4 20 2.35W 40250 † x 2-1/8 4 20 1.82W 40251 † x 1-5/8 4 20 2.47W 40252 † x 1-3/8 4 20 1.96W 40253 † x 1-1/8 4 20 2.47W 40254 † x 7/8 4 20 2.18W 40255 † x 5/8 4 20 2.47W 40221 † x 1-1/8x2-5/8 4 20 2.39W 40256 † x 2-1/8 4 20 1.97W 40257 † x 1-5/8 4 20 2.15W 40258 † x 1-3/8 4 20 2.04W 40259 † x 1-1/8 4 20 2.27W 40222 † x 7/8x2-5/8 4 20 2.41W 40151 3-1/8x3-1/8x2-5/8 2 10 2.45W 40150 x 2-1/8 2 20 2.3W 40149 x 1-5/8 2 10 2.18W 40148 x 1-3/8 2 10 2.38W 40147 x 1-1/8 2 20 1.96W 40146 x 7/8 2 20 1.49W 40145 x 5/8 2 20 1.38W 40159 x 2-5/8x3-1/8 2 10 2.96W 40158 x 2-5/8 2 10 4.52W 40157 x 2-1/8 2 10 2.68W 40156 x 1-5/8 2 10 2.63W 40155 x 1-3/8 2 10 2.62W 40154 x 1-1/8 2 20 2.02W 40167 x 2-1/8x3-1/8 2 10 3.07W 40165 x 2-5/8 2 10 4.64W 40164 x 2-1/8 2 10 2.75W 40163 x 1-5/8 2 10 2.57W 40162 x 1-3/8 2 10 2.61W 40161 x 1-1/8 2 20 2.04W 40174 x 1-5/8x3-1/8 2 10 2.97W 40181 x 1-3/8x3-1/8 2 10 3.14W 40178 x 1-1/8x3-1/8 2 10 3.02W 40179 x 7/8x3-1/8 2 10 3.03W 40198 4-1/8x4-1/8x3-1/8 1 5 4.94W 40197 x 2-5/8 1 5 5.16W 40196 x 2-1/8 1 10 4.52W 40195 x 1-5/8 1 10 4.47W 40194 x 1-3/8 1 10 4.55W 40193 x 1-1/8 1 10 3.05W 40192 x 7/8 1 10 2.89W 40191 x 5/8 1 10 2.89W 40208 x 3-1/8x4-1/8 1 5 8.66W 40206 x 3-1/8 1 5 5.12W 40205 x 2-5/8 1 5 5.61W 40204 x 2-1/8 1 5 4.76W 40212 x 2-5/8x4-1/8 1 5 7.79W 40216 x 2-1/8x4-1/8 1 5 8.95W 40215 x 1-5/8x41/8 1 5 8.51W 40214 4-1/8x1-3/8x4-1/8 1 5 8.57W 40213 x 1-1/8x4-1/8 1 5 9.33W 40503 6-1/8x6-1/8x3-1/8 – 1 11W 40504 x 2-5/8 – 1 11.1W 40505 x 2-1/8 – 1 9.54

TEE

FORGED BRASSWT-602

C x C x CBA

C


W 04208 1/4x1/4x1/4 50 450 0.09W 04209 x 1/8 50 1,200 0.04W 04228 3/8x3/8x3/8 25 350 0.15W 04229 x 1/4 25 400 0.1W 04230 x 1/8 10 400 0.11W 04259 1/2x1/2x3/8 10 240 0.15W 04283 5/8x5/8x1/2 10 150 0.33

TEE

FITTINGWT-600F

C x FTG x C


W 04106 † 5/8 50 300 0.1W 04131 † 7/8 25 150 0.19

UNION

WC-407 C x C


W 08001 3/8 25 250 0.12W 08002 1/2 25 250 0.11W 08003 5/8 25 250 0.16W 08004 7/8 25 150 0.37W 08005 1-1/8 10 100 0.52

COPPER TUBE STRAP

2-HOLEWS-1100Part Size Box Ctn Wt

A 01203 1/4 100 4,000 0.01A 01278 3/8 100 5,600 0.01A 01366 1/2 100 3,400 0.01A 02529 5/8 100 1,500 0.01A 01467 3/4 100 2,000 0.01A 02574 7/8 50 750 0.01A 02614 1-1/8 50 750 0.02A 02650 1-3/8 50 500 0.04A 02675 1-5/8 50 500 0.05A 02708 2-1/8 50 500 0.06

PERFORATED COPPER STRAP

WS-1101


A 01211 25 Ft.Roll 1 10 1.63



COPPER FITTING DATA

TEMPERATURE - PRESSURE RATINGS OF SOLDER JOINTS

ALLOYS USED FOR JOINTS

SERVICE TEMPERATURE

ºF

STANDARD TUBE SIZE, TYPES K, L, AND M

WATER AND NON-CORROSIVE LIQUIDS & GASES

1/4 to 1 1-1/4 to 2 2-1/2 to 4 5 to 8

50 / 50 Tin Lead SolderNot to be used in potable water systems

100 200 175 150 135150 150 125 100 90200 100 90 75 70250 85 75 50 45

95 / 5 Tin-Antimony Solder

100 1090 850 705 660150 625 485 405 375200 505 395 325 305250 270 210 175 165

Alloy E Solder

100 710 555 460 430150 475 370 305 285200 375 290 240 225250 320 250 205 195

Alloy HB Solder

100 1035 805 670 625150 710 555 460 430200 440 345 285 265250 430 335 275 260

Brazing Alloys (melting at or above 1000ºF) Pressure-temperature ratings is that of the tubing being used

Note: Ratings are those given in ASME B 16.22 “Wrought Copper and Copper Alloy Solder Joint Pressure Fittings.” (a) Solder alloys are covered by ASTM Standard Specification B32. The Safe Drinking Water Act Amendment of 1986 prohibits the use of any solder having a lead content in excess of 02% for potable water systems.

PRESSURE LOSS IN FITTINGS EXPRESSED AS EQUIVALENT LENGTH OF TUBE, FEET

Normal or Standard in Inches

Wrot Copper Fittings

90 DegreeEll

45 DegreeEll

TeeStraight Run

TeeSide Branch

Coupling180 Degree

Bend

3/8 0.5 0.5 0.5 1 - 0.51/2 0.5 0.5 0.5 1 - 15/8 0.5 0.5 0.5 2 - 13/4 1 0.5 0.5 2 - 21 1 1 0.5 3 - 2

1-1/4 2 1 0.5 4 0.5 31-1/2 2 2 1 5 0.5 4

2 2 2 1 7 0.5 82-1/2 2 3 2 9 0.5 16

3 3 4 - - 1 20


COPPER TUBE AND SOLDER TYPE FITTINGS1. Cut tube to length & remove

burr with file or scraper.

2. Clean outside of tube with sandpaper or sand cloth.

3. Clean inside of fitting with wire brush, sand cloth or sandpaper.

4. Apply flux thoroughly to inside of fitting.

5. Apply flux thoroughly to outside of tube - assemble tube and fitting.

6. Apply heat with torch. When solder melts upon contact with heated fitting, the proper temp for soldering has been reached. Remove flame & feed solder to the joint at one or two points until a ring of solder appears at the end of the fitting.

1. Cut tube square with the cutter or fine hack saw (32 tooth blade is recommended). Remove Burr.

2. Clean outside end of copper tube thoroughly with sand cloth or sandpaper equal depth of fitting. Leave no dark spots.

3. Clean inside of fitting carefully to tube stop with wire brush. Note: Sand cloth or sandpaper may also be used.

4. Using a brush, apply light uniform coat of soldering flux to the outside of the tube and inside of the fitting.

5. Slip tube into fitting to tube stop. Turn tube back and forth once or twice to distribute flux evenly.

6. Apply heat uniformly around the fitting with torch. When solder melts upon contact with heated fitting, the proper soldering temperature has been reached. Remove flame and feed solder slightly off center at the bottom of the joint. Proceed across the bottom of the fitting and up to the top center position. Return to the starting point, and then proceed up the incomplete side to the top, again, overlapping the solder metal. Wipe off surplus solder with a piece of cloth.

CAUTION: No not overheat the joint or direct the flame into the face of the fitting cup. Overheating could burn the flux, which will destroy its effectiveness and the solder will not enter the joint properly.

Date post:	29-Apr-2018
Category:	Documents
Upload:	tranthuy
View:	227 times
Download:	2 times

Job Name Contractor Job Location Wholesaler Engineer ... Fittings for HVACR... · Job Name...

Documents