+ All Categories
Home > Documents > JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM...

JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM...

Date post: 03-Feb-2018
Category:
Upload: dangliem
View: 217 times
Download: 0 times
Share this document with a friend
94
1 From: Nicholas Ybarra [mailto:[email protected] ] Sent: Tuesday, January 06, 2015 4:06 PM To: [email protected] Subject: Looking for Civil Engineer for El Paso Office Dr. Lowery, We are looking for a civil engineer who is willing to relocate to the El Paso area to work on our Solid waste team. If you could provide recent graduate information it would be appreciated. I have attached the job description for the position in our company. Please see http://Lowery.tamu.edu/announcements/Parkhill.pdf for details and apply at http://www.team-psc.com/c1_opportunities.html . Thanks for your help, Nicholas N. Ybarra, P.E. Project Manager PARKHILL SMITH &COOPER 915.533.6811 | team-psc.com From: Pierre, Patricia [mailto:[email protected] ] Sent: Wednesday, January 14, 2015 9:02 AM Subject: Entry Level Structural Engineer Opportunities at CDM Smith in Dallas, Pittsburgh, and Orlando Good Morning, I wanted to advertise the entry level Structural Engineer opportunities we have in our offices to your students. We’re looking for someone to start immediately (or after graduation in May). The job requires a Master’s degree. If you know of any students who might be a good fit please pass this along to them. Please see http://Lowery.tamu.edu/announcements/CDMSmith.pdf for brochure. Thank You!
Transcript
Page 1: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

1

From: Nicholas Ybarra [mailto:[email protected]] Sent: Tuesday, January 06, 2015 4:06 PMTo: [email protected] Subject: Looking for Civil Engineer for El Paso Office

Dr. Lowery,

We are looking for a civil engineer who is willing to relocate to the El Paso area to work on our Solid waste team.  If you could provide recent graduate information it would be appreciated.  I have attached the job description for the position in our company. 

Please see http://Lowery.tamu.edu/announcements/Parkhill.pdf for details and apply at http://www.team-psc.com/c1_opportunities.html.

Thanks for your help,

Nicholas N. Ybarra, P.E.Project Manager

PARKHILL SMITH & COOPER 915.533.6811 | team-psc.com

From: Pierre, Patricia [mailto:[email protected]] Sent: Wednesday, January 14, 2015 9:02 AMSubject: Entry Level Structural Engineer Opportunities at CDM Smith in Dallas, Pittsburgh, and Orlando

Good Morning,

I wanted to advertise the entry level Structural Engineer opportunities we have in our offices to your students. We’re looking for someone to start immediately (or after graduation in May). The job requires a Master’s degree. If you know of any students who might be a good fit please pass this along to them. Please see http://Lowery.tamu.edu/announcements/CDMSmith.pdf for brochure.

Thank You!

Patricia PierreCollege [email protected]/Fax: 617-452-6692CDM Smith 50 Hampshire StreetCambridge, Ma 02139

Job Title STRUCTURAL ENGINEER 2Location Pittsburgh, PA; Dallas, TX; Orlando, FLWhy CDM CDM Smith provides lasting and integrated solutions in water, environment, transportation,

Page 2: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

2

Smith? energy and facilities to public and private clients worldwide. As a full-service consulting, engineering, construction, and operations firm, we deliver exceptional client service, quality results and enduring value across the entire project life cycle.

Job Description

CDM Smith’s Design Centers are looking for Structural Engineers to join the team! You'll be working with a dynamic team of industry leading engineers on a diverse portfolio of public, federal, and industrial projects. Are you ready to take the next step in your career?

We’re passionate about what we do. We work together—in teams and in partnership with our clients—to solve complex environmental and infrastructure challenges. Together, we create a learning culture, dedicated to always finding a better way for our clients, for the planet, and for each other.

We pride ourselves on providing a unique and stimulating work environment, and are serious about our commitment to every employee—offering competitive benefits, fostering an inclusive workplace, and providing career development.

CDM Smith’s structural engineering experience encompasses a comprehensive array of services, including:

-Existing Structures:-Disaster Response (Flooding, Wind, Earthquake, Snow, Fire)-Design of Stabilization (Temporary Shoring and Bracing)-Structural Condition Surveys & Assessment-Seismic Evaluation & Retrofit

New Structures:-Water Treatment Plants-Pump Stations-Earth Retaining Systems-Shallow & Deep Foundations-Industrial Facilities

In this role you would perform a variety of tasks including:

-CADD production of design drawings including 3D design.-Generation and checking of engineering calculations.-Formulating construction shop drawing reviews and responses to contractor.-Coordinating structural standard details to project and specification requirements.-Assisting with the preparation of Structural specifications using master and guide specs.-Coordinating with other disciplines and functions throughout design.-Making job site visits and inspections as needed.

Minimum Qualifications

Master’s degree in Civil Engineering required (preference to structural emphasis). Position requires registration as an Engineer-in-Training by passing the FE exam, or ability to obtain an EIT within 18 months of hire. Knowledge of commonly used computer software (Word, Excel, AutoCAD) expected. Familiarity with structural analysis programs such as MATHCAD, STAAD, Column, Mats, and spSlab highly desirable. Candidate must have excellent writing and communication skills.

Assignment Category Fulltime-Regular

EEO Statement

We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate—as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

Page 3: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

3

Send resumes to [email protected]

Lee,

Resumes can be sent directly to me at [email protected].  We are looking for a document control / field engineer for the project listed below. Thanks for your quick response.

Thanks,Peggy

Albany Green Energy Biomass CHP Project  is a 50mW gross (net 42 MW) wood-fired renewable energy power facility located in Albany, GA, which is within the forest region of Southwest Georgia.

The project will be designed as a combined heat and power facility which will provide an industrial manufacturing plant with export steam at the same time that power is being generated for Georgia Power.  The objective is to expand the plant’s use of steam from a renewable resource and displace its use of natural gas with biomass-derived steam heat in the manufacturing process.

The CHP facility consists of one (1) biomass CFB boiler, one (1) condensing steam turbine generator, one (1) water cooled condenser, cooling towers, an ash handling system, a wood fuel handling system, flue gas treatment, electrical distribution, instrumentation and balance of plant equipment necessary to provide a fully operable plant.

The CHP Facility will provide export steam to the adjacent Procter and Gamble paper product manufacturing plant.

DCO Albany Energy LLC will be the Engineering, Procurement, and Construction (EPC) Contractor for Albany Green Energy, LLC and will be responsible for the design, purchasing of major equipment, construction and startup of the energy project.

The site address is:512 Liberty Express Way SEAlbany Georgia 31705

Peggy Reager - HR DirectorJoseph Jingoli & Son, Inc.100 Lenox DriveSuite 100Lawrenceville, NJ 08648Tel. 609-896-3111 | Direct 609-512-2244 | Fax. 609-219-0799  [email protected] | www.jingoli.com

Page 4: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

4

1/21/15Dr. Lowery:

After hiring several excellent Aggie EITs over the last few years, we have created a program called the Engineer Development Program here at Yalgo. This unique program puts the recent graduate on the career fast track by giving him or her the opportunity to rapidly gain a broad range of experience in the land development industry. This program is only open to highly qualified candidates, and we are looking for someone from the upcoming spring graduating class. We have created an exciting program that builds on the bedrock of education provided by A&M, preparing the candidate for a successful career in this industry like few others!

Would you mind sending the attached announcement out, please? Thanks again for your help! Please see http://lowery.tamu.edu/announcements/Yalgo2.pdf

Best Regards,Scott A. Brooks, P.E., C.F.M.Yalgo, LLC(254) 953-5353, x-1232 office

1/22/15Dr. Lowery,

I hope this emails finds you well.  We are looking for a Field Engineer to join our growing team in Houston.  I have attached a copy of the job description as well as an e-brochure describing our work. 

The ideal candidate would have a strong interest in geotechnical construction and design along with a willingness to gain valuable field knowledge through “boots on the ground” experience.  Applicants should email a copy of their resume and transcript to [email protected]. I appreciate your help.Please also see http://Lowery.tamu.edu/announcements/Menard1.pdf and http://Lowery.tamu.edu/announcements/Menard2.pdfRegards,

Jonathan Dwight, P.E.Project Manager

Menard USA11767 Katy Freeway. Suite 705 | Houston, TX 77079

Page 5: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

5

      www.menardusa.com

From: Maria Alves <[email protected]>Date: January 25, 2015Subject: Please share with our students - Tenaris International Internship

Could you please share this information with your students?Thanks,Maria Tenaris, the leading global manufacturer and supplier of tubular products, is coming to campus this week to recruit for the summer 2015 International Internship. Tenaris is hosting two Informational & Pre-Assessment Center immediately after the SEC Engineering Career fair. The session will consist of a presentation about Tenaris, a 45-min numerical reasoning test, videos about Tenaris Internship experiences in the US and abroad, and a Q & A session. This is the first and most important step to pursue a career with Tenaris. We want to see you there!

Session 1Date: Tuesday, January 27, 2015 Time: 5:00pm – 9:00pmLocation:  Brown Building  (Chemical Engineering) Room 104 Session 2Date: Wednesday, January 28, 2015 Time:  5:00pm – 9:00pm Location:  Brown Building  (Chemical Engineering) Room 104 More information attached. Please see http://Lowery.tamu.edu/announcements/Tenaris.pdf  Thanks,Maria   

1/26/15Howdy,

I am Sandip Dhanani (A&M Class of ‘09) and I am currently working with Bayer Technology Services. Bayer is currently seeking new/recent graduates (Preferably Spring 2015 Graduates) to fill two full-time positions in Project Controlling group. We are accepting resume of candidates with undergraduate, graduate or PhD degrees in Engineering or related field. Please find attached document for a more detailed job description. The job has been posted on University Career Center (Hireaggies.com) website as well. Also see http://Lowery.tamu.edu/announcements/bayer.pdf

Students can apply for this position through University Career Center website or apply directly at Bayer career webpage which can be found at http://career.bayer.com/en/career/index.html. They can also send me their resume with cover letter and an unofficial transcript at [email protected].

Please let me know if you or any interested student have any questions or need further information.

Page 6: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

6

Gig ‘em!

Freundliche Grüße / Best Regards,--Sandip Dhanani, PMPProject Controls Specialist

Greetings, Dr. Lowry!

Once again we are looking for full-time engineering summer interns, and this year we are trying to get an earlier start so we will be able to interview candidates during spring break if possible. Could you please post this opportunity again for the civil engineering students? Ideally we would like to find students who are interested in pursuing geotechnical engineering or materials engineering as a career, but it is open to all engineering students.

Please see http://Lowery.tamu.edu/announcements/GMEInternship.pdf

Also, we are looking for an engineering student graduating this year who wants to pursue geotechnical engineering and/or soil and materials engineering. What would you recommend as far as finding that sort of candidate?  

Marcia S. Kawalek, Chief Executive OfficerGME Consulting Services, Inc.Geotechnical Engineering, Materials Testing & Environmental ConsultingWBE, HUB214-351-5633

From: Adam Antosh [mailto:[email protected]] Sent: Tuesday, February 10, 2015 8:58 AMTo: Lowery Jr, Lee LSubject: RE: SCA Consulting / Civil Engineering info session

Dr. Lowery,

If you haven’t already, can you please send out the following email on the civil engineering list server:

COMPANY: SCA Consulting EngineersDATE: Tuesday, February 17th

TIME: 4:00pm – 5:00pmLOCATION: Room #219 Civil Engineering building

SCA Consulting Engineers, a structural engineering firm located in Houston, TX, will be hosting a short presentation Tuesday, February 17th at 4:00pm in room #219 of the Civil Engineering building.  Topics to be discussed are current projects under design/construction, current changes within computer aided design, and available employment opportunities.  If you are interested in either a full-time position or internship, please attend and bring a copy of your resume.  To be

Page 7: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

7

considered for a full-time position, you must be graduating with a graduate degree. (I assume that means undergraduates will be considered for the internship positions – L^3).

Students are welcome to browse the company website (www.scaengineers.com) before the info session.  As a courtesy, a request is made that any student interested in attending email Adam Antosh ([email protected]). However, walk-ins are welcome. PIZZA will be provided.  If students have any questions prior to the event, they can be sent to the email address stated above.

Thanks,

Adam AntoshSCA Consulting Engineers12511 Emily Court, Sugar Land, TX 77478P: 713.779.7252/[email protected]

From: Amy Holland [mailto:[email protected]] Sent: Tuesday, February 10, 2015 10:36 AMTo: [email protected]: Looking for a Structural Engineer

Hello Mr. Lowery,

I was just looking at your website, specifically the section  “L. Graduating students I would highly recommend”.  Do you have any updated candidates?  We are a structural engineering firm in Lindale, TX (just north of Tyler, TX).  We have a project engineer working for us who has just let us know he and his wife are moving to Dallas for her nursing job.  He is a great guy and we will miss him.  I need to start looking now for either a recent graduate or someone who is graduating this May w/ emphasis in Structural Engineering. 

I will email you later today w/ a job posting for you to post on your website.  I am assuming you still do that?  Our other project engineer in the office is RJ Brey, PE.  He is a former Texas A&M student, bachelors and masters.  He is the one who told me about your site. 

We are interested in a Texas A&M student/graduate due to the fact that they come out of college w/ more structural engineering classes/background.  Thanks in advance for your help.

You can learn more about us at www.hollandengr.com

Holland Engineering, LLC is a structural engineering consulting firm located in Lindale, TX. Please visit our website to learn more about us and the type of projects we work on at www.hollandengr.com. We are seeking a structural engineer to add to our team. We are interested in a Texas A&M graduate or upcoming graduate who has the structural option. Master of Science preferred but not required. We offer competitive compensation and benefits. Please send your resume to [email protected].

Sincerely,

Page 8: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

8

Amy E. HollandVice President and Project Engineer Holland ENGINEERINGTexas Firm #F-8474Physical Address: 16291 FM 849, Lindale, TXMailing Address: PO Box 2428, Lindale, TX 75771903.882.8503/FAX. [email protected]

Find us on Facebook

2/17/15

From: Moore, Brent [mailto:[email protected]]

…    {General chit chat } 

If you could pass the advertisement on (Ports EIT Position Descriptions 112012.docx) to other prospective students (structural with geotech emphasis) who are graduating in May 2015 that would be great.  They can send resumes directly to me or forward to Celina Walker (copied above).  We typically look for candidates who are above average communicators, can demonstrate good mechanical aptitude (previous work experience, construction, hobbies, etc.) and those who have a solid structural / geotechnical academic foundation.  I have included a few typical project sheets to illustrate why we are interested in those qualifications.  This is the type of work we do on a regular basis.  Large loads, soil structure interaction, non-repetitive engineering. 

See http://lowery.tamu.edu/announcements/Moore1.pdf  And, in return, we would be glad to come help with a class presentation to answer the questions of 1) why do we need to learn calculus? 2) what practical use are these stresses/strains/influence lines/pressure diagrams, etc.  Thanks!  I hope all is well in Aggieland!  Gig ‘Em.

D. Brent Moore, P.E.Class of 1993Ports & Harbors – Gulf Coast Program Manager

HDR 555 N. Carancahua, Suite 1600Corpus Christi, TX 78401D 361.696.3374 M 361.779.6587 [email protected]

Ports Project Engineer:  HDR is seeking a qualified individual to join a group of experts in the Ports and Maritime group as a Project Engineer.  This individual will participate with teams to design small to large

Page 9: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

9

projects (construction values typically from $500K to $100M) and primary focus will be on geotechnical, structural and general civil design elements of projects.  Primary responsibility will involve performing design tasks on projects ranging from limited complexity and scope to those including complex features.  Efforts will be guided by senior level engineers and management.Duties will include:

performing design tasks to clearly illustrate constructible/practical plans, details and technical specifications

Construction field observations to verify general conformance with contract documents Production of documents (studies/reports, designs, details, sketches, opinions of costs)

Other responsibilities will include assisting in the development of best practices.  Active participation in a technical organization(s) relative to the industry and/or assistance (coauthoring) in publication of technical articles will be a secondary expectation of this role.The ideal candidate will have a good mechanical aptitude and prior work experience to illustrate construction observation or administration experience and/or evidence of other mechanical aptitude.  Good to excellent oral and written communications skills will be required for interaction between peers, management and other design and production staff.    Experience/Minimum Requirements:  0 to 4 years of experience involving similar work described above, Master of Science Degree in Civil or Structural Engineering (or foreign equivalent), Engineer in Training license or ability to obtain within six months.Current knowledge of linear, non-linear, large displacement, high end structural analysis and soil-structure interaction analysis and design software is mandatory.  Knowledge and ability to use AutoCad and Microsoft Office software is also required.  Examples include; RISA 3D or SAP 2000, GROUP, LPILE, CWALSHT.

2/20/15Hi Mr. Lowery,

I enjoyed speaking with you earlier today!  I have attached the job description for our Account Manager for the San Antonio region.  InVia Pavement Technologies is a subsidiary of MeadWestvaco.  You can visit more information at www.invia-tech.com.

I would welcome resumes to my email address if you have candidates that are interested in Sales opportunities. Please see http://Lowery.tamu.edu/announcements/Invia.docx 

Thank you for your time. 

Ashley GuinnContract RecruiterMeadWestvaco843-746-8210, Office 843-494-4702, Mobile843-740-2158, Fax

Specialty Chemicals5255 Virginia Avenue

Page 10: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

10

North Charleston, SC 29406www.mwv.com/careers

https://www.youtube.com/watch?v=nPZlI5_5shc

2/18/15Good Afternoon,

Could you please distribute this to your students and recent graduates.

Allen Butler Construction, Inc. is currently looking to hire a recent or upcoming graduate for the position of Superintendent and Foreman.

Allen Butler Construction, Inc. is a heavy-highway, civil contractor that has been in business since 1978. ABCI serves Lubbock and the surrounding areas, working in all facets of civil construction for municipal and commercial customers, as well as being the only locally based TXDOT certified contractor.  ABCI is a growing, mid-sized company that specializes in concrete paving, asphalt paving, bridge building, storm sewer, earth moving, and demolition, and provides opportunity for advancement and career growth.

Responsibilities:          Ensure on time completion of projects         Ensure on budget production         Oversee daily job site operations         Coordinate crews and personnel          Lead and direct crews         Daily reports to project managers         Overall management of jobsite and production

Skills:         Detail oriented         Civil Construction Methods         Strong written and verbal communication         Problem Solving

This position requires a degree in Civil Engineering, Construction Engineering, or Construction Science or Management.   Working knowledge of Microsoft Office, Primavera, AutoCAD. Experienced knowledge of civil construction methods. Must have valid driver’s license.

Work is performed outdoors. While working outdoors, will be exposed to weather conditions. Regional travel to job sites is required. Lifting of equipment up to 30 pounds. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary

Experience: None required, will train.

Page 11: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

11

Travel Required: Regional Travel – 60 mile radius of Lubbock

To apply for this position, apply in person at 2413 Private Road 7320, Lubbock, TX 79423 or email your resume to [email protected].

Best Regards,

Daniel R. Wetzel, P.E.Chief Financial OfficerAllen Butler Construction, Inc.Colossians 3:23Strength & [email protected](m) 806.441.7183(o) 806.745.7498(f) 806.745.7577

2/18/15 second job openingGood Afternoon,

Could you please distribute this to your students and recent graduates.

Allen Butler Construction, Inc. is currently looking to hire a recent or upcoming graduate for the position of Project Manager.

Allen Butler Construction, Inc. is a heavy-highway, civil contractor that has been in business since 1978. ABCI serves Lubbock and the surrounding areas, working in all facets of civil construction for municipal and commercial customers, as well as being the only locally based TXDOT certified contractor.  ABCI is a growing, mid-sized company that specializes in concrete paving, asphalt paving, bridge building, storm sewer, earth moving, and demolition, and provides opportunity for advancement and career growth.

Responsibilities:          Contract & Subcontract Administration         Submittal Preparation and Review         Contract and Job Scheduling         Job performance review         Material procurement          Plan and Spec review         Monthly Billing and Forecasting         Daily Communication both written and verbal         Daily job site visits and reports

Page 12: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

12

         Progress meetings         Problem Solving

This position requires a degree in Civil Engineering, Construction Engineering, or Construction Science or Management.   Working knowledge of Microsoft Office, Primavera, AutoCAD preferred.

Experience: None required, will train. Travel Required: None

To apply for this position, apply in person at 2413 Private Road 7320, Lubbock, TX 79423 or email your resume to [email protected].

Best Regards,

Daniel R. Wetzel, P.E.Chief Financial OfficerAllen Butler Construction, Inc.Colossians 3:23Strength & [email protected](m) 806.441.7183(o) 806.745.7498(f) 806.745.7577

2/18/15 third job openingGood Afternoon,

Could you please distribute this to your students and recent graduates.

Allen Butler Construction, Inc. is currently looking to hire a recent or upcoming graduate for the position of Survey Crew Chief.

Allen Butler Construction, Inc. is a heavy-highway, civil contractor that has been in business since 1978. ABCI serves Lubbock and the surrounding areas, working in all facets of civil construction for municipal and commercial customers, as well as being the only locally based TXDOT certified contractor.  ABCI is a growing, mid-sized company that specializes in concrete paving, asphalt paving, bridge building, storm sewer, earth moving, and demolition, and provides opportunity for advancement and career growth.

Responsibilities:          Construction Staking & Surveying         Construction Layout

Page 13: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

13

         Setting Blue-tops         Field Engineering         Trouble Shooting         Daily reports         Problem Solving

Skills:         AutoCAD         Total Station         Construction Survey Methods         Construction Staking Methods         Read and comprehend plans

This position requires a degree in Civil Engineering, Construction Engineering, or Construction Science or Management.   Working knowledge of Microsoft Office, Primavera, AutoCAD, & TDS Foresight. Experienced knowledge with total station & construction survey methods. Must have valid driver’s license.

Work is performed outdoors. While working outdoors, will be exposed to weather conditions. Regional travel to job sites is required. Lifting of equipment up to 30 pounds. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary

Experience: None required, will train. Travel Required: Regional Travel – 60 mile radius of Lubbock

To apply for this position, apply in person at 2413 Private Road 7320, Lubbock, TX 79423 or email your resume to [email protected].

Best Regards,

Daniel R. Wetzel, P.E.Chief Financial OfficerAllen Butler Construction, Inc.Colossians 3:23Strength & [email protected](m) 806.441.7183(o) 806.745.7498(f) 806.745.7577

2/23/15

Page 14: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

14

Dr. Lowery,

Hello Dr. Lowery,

My name is Jeremy Boyd with RLB Contracting. I stopped by the Civil Engineering department there in College Station a few days ago inquiring about posting a job for a civil engineering student. We are looking for a recent graduate or a soon to graduate student who can help us process survey data by turning the raw data into an autoCAD topo model that can be used to determine quantities. If you would please give me a call at (361) 552-2104 or send me an email at [email protected] I would greatly appreciate it.

Jeremy BoydRLB Contracting Inc.

    I've had a chance to talk with our operations manager, Toby, and he has given me a better idea on the position that we are currently trying to fill. This position would require:     - Being able to take raw field data and convert it into a computer model to preform quantity calculations on.     - Conduct site visits to be able to visualize the surveys they would be processing.     - Plot cross sections from the field data received.      - Experience with a model program to build templates for different jobs in which quantity calculations would be needed     - Full-time, with $45,000-$55,000 starting pay     - Located in Port Lavaca, Texas

Jeremy Boyd     [email protected]

2/26/15Dr. Lowery,

Binkley & Barfield Inc. will be hosting an information session Monday, March 2nd  from 5:15-6:30 p.m. in Rudder room 302. Our company will be looking to hire students for full time job positions and summer internship opportunities, in a variety of our regional offices.

Please forward this through the CVEN List Server to let Civil students know about this opportunity.

Please see http://Lowery.tamu.edu/announcements/BBI2.pdf  

Thank you,

Greg Lanting, Class of 2012Graduate Engineer

Page 15: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

15

                           

3452 Rock Prairie Road WestCollege Station, TX 77845979.314.0953 [email protected]

Serving Texas Communities For 40 Years.HOUSTON HQ   -   Gulf Coast Region   |   RICHARDSON   -   DFW Region   |   AUSTIN   -   Central Texas Region   |   COLLEGE STATION   -   Brazos Valley Region

Hi Dr. Lowery,

Gessner Engineering is looking for more interns! We are losing four interns this May, due to graduation.

Would you mind posting the internship opportunity to your list server again?

http://www.gessnerengineering.com/gessner-careers/

Thank you,

Alyssa S. Wisnoski | Director of Human Resources  Gessner Engineering, LLCwww.gessnerengineering.com t. 979. 680. 8840f. 979. 680. 88412501 Ashford Drive, Suite 102College Station, Texas 77840Civil | Structural | Geotechnical | Land Surveying | Construction Materials Testing State of Texas HUB CertifiedCollege Station | Brenham | Fort Worth | San Antonio

From: Jessica Brown [mailto:[email protected]] Sent: Tuesday, March 10, 2015 4:29 PMTo: [email protected]; Kelly BrumbelowSubject: Job Posting for Entry Level Engineer

Dr. Lowery and Dr. Brumbelow,

Page 16: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

16

I wanted to pass along these two opportunities that we have in our group for May (or August) grads.  Interested candidates should send their resume to me at the email address below and can contact me with any specific questions on the positions or our work. 

Entry Level Engineer PositionThe Water and Wastewater Master Planning Group at Freese and Nichols, Inc. is interested in hiring two entry level engineers (May or August 2015 graduates), one in the Fort Worth office and one in the Austin office, as part of a project team to work on water/wastewater/reuse system modeling, asset management, water quality analysis and other infrastructure planning projects for utilities and municipalities.  Engineers will have the opportunity to work on a wide range of projects, be provided on-the-job training and be a part of a team that is on the cutting edge of water and wastewater planning and technology and committed to helping utilities meet their growth needs along with regulatory requirements.Qualified candidates will have a bachelor’s or master’s degree in civil engineering.  ArcGIS skills are a plus.

Jessica L. Brown, P.E. ’97Principal

Freese and Nichols, Inc.4055 International Plaza, Suite 200Fort Worth, TX 76109817-735-7406 office817-735-7492 [email protected]

3/11/15Dr. Lowery,

I am looking for current civil engineering students who are working towards a career in structural engineering and who might be interested in a summer internship in Amarillo.

To be considered the applicant must be: Working towards a career in structural engineering Interested in developing a relationship with my firm that could lead to full time

employment after graduation A US Citizen

The ideal candidate would be: An upper level undergraduate student or a graduate student Fluent in AutoCad Able to perform structural engineering design tasks such as Frame Analysis, Steel Design

and Concrete Design

Page 17: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

17

Huseman Engineering, LLC is a firm that I personally launched 4 years ago and is growing very quickly. This internship presents a unique learning opportunity for a student to work directly with the engineer who is not only responsible for all projects but also the company as a whole.

Interested students should send their resume to me at [email protected]. I would be happy to interview any interested candidates over spring break.

Students can also view my website at http://husemanengineering.com/ to learn more about the company and the types of projects they will work on.

Thank you!

3/12/14Dr. Lowery,

It was good visiting with you this afternoon.  I have the following two immediate openings.

DESIGN ENGINEER BS Civil Engineering Engineering / Management / Construction Firm – Structural, Environmental, Civil Salary - $50 - $60 Job Description:  Design and Project Management for various municipal, commercial and

industrial projects in the fields of structural, environmental and civil engineering.  Emphasis in structural and CAD experience is a plus.  Must be a disciplined, self-motivate, self-driven individual willing to accept design responsibility (with direction) without being spoon fed.

Immediate opening in Texarkana, TX / AR Send resume to Craig Beckham ’93 at [email protected].  I will provide an

immediate response.

CONSTRUCTION MANAGEMENT BS Civil Engineering / BS Construction Science Engineering / Management / Construction Firm – Structural, Environmental, Civil Salary - $50 - $60 Job Description:  On-site Construction Management / Construction Engineering for

commercial and heavy industrial projects.  Must be a disciplined, self-motivate, self-driven individual willing to accept job site responsibility (with direction) without being spoon fed.  Must possess good verbal and written communication skills.

Page 18: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

18

Immediate project site openings in Louisiana, Texas & Georgia. Send resume to Craig Beckham ’93 at [email protected].  I will provide an

immediate response.

Craig L. Beckham, P.E.Principal

 

CLB ENGINEERS, INC.923 Hickory StreetTexarkana, AR 71854(870) 772-6934 - office(870) 772-6444 - fax(903) 278-2381 - cell

CELEBRATING 14 YEARS!

Dr. Lowery,We are looking to hire an Aggie to fill a full time, civil engineering EIT position at our firm, TRC, in the Arlington, Texas office.  Attached is an ad describing the position.  We’re looking for a recent graduate or upcoming May 2015 graduate.  More information regarding TRC can be found at http://www.trcsolutions.com. See also http://lowery.tamu.edu/announcements/TRC.pdf

We are also interested in hiring a current civil engineering student for a summer internship position.

Could you please forward this to anyone that might be interested?  Applicants can email their resumes directly to me at [email protected].   

Thanks in advance!

Justin Thomas, P.E.Project Manager

700 Highlander Blvd., Suite 210, Arlington, TX 76015T: 817.522.1014

LinkedIn | Twitter | Blog | Flickr | www.trcsolutions.com  TRC Engineers, Inc.  T.B.P.E. # F-8632

Page 19: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

19

3/18/15Hi Dr. Lowery,

Would it be possible for you to post the following positon on the list serve for the May 2015 graduates?

Kindest Regards, Sheena

Sheena BartholdJacobsRecruiter | Talent Acquisition817-347-5386 [email protected] www.jacobs.com

Jacobs World: http://www.jacobs.com/jacobsworld

Land Development Entry Level EIT (Seeking May 2015 Graduates)

Our Dallas, TX office is seeking an EIT with a passion to become a dedicated professional within the land development industry who is interested in joining a team which will foster grow into a leadership position.  This new hire to our team will assist Engineers by performing the routine aspects of civil engineering assignments, subsequently providing familiarity with the programs, staff, and operating procedures of the company.

Principal Duties and Responsibilities

Performs civil design calculations (i.e., grading, drainage, paving, geometric design, utility design), sketches, technical comparisons and similar technical work as required by assignment

Coordinates project assignments with those of other engineers and technicians in his/her discipline group.

Reviews drawings supplied by vendors, clients, and engineers and architects and recommends necessary changes.

Researches code issues and works with City, State, and County officials. Researches design options and documents findings for Project Engineers and/or Project

Managers. Assists with other duties assigned by Project Engineers and/or Project Managers.

Experience Bachelor of Science in Civil Engineering is required At least one summer land development internship is preferred

Page 20: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

20

EIT certificate desirable One summer internship experience with AutoCAD is preferred

Interested candidates should email their resume to [email protected] and visit our website to apply for IRC298675.

3/19/15

Howdy Dr. Lowery!

I hope all is well in Aggieland!  Please find attached an exciting opportunity for a young engineer.  We would greatly appreciate you posting this position to the listserv.  If there is any additional information that you feel needs to be included in the job posting please let me know.

Please see http://Lowery.tamu.edu/announcements/stokes.pdf 

Thanks and Gig ‘em!

Michael Delaney, ‘05STOKES & ASSOCIATES, INC.CONSULTANT ENGINEERS605 S. Main, Suite 200Henderson, Texas 75654Texas Firm Reg. No. F-967Phone: 903 657 7558Fax:     903 657 [email protected]

Hi Dr. Lowery,

Our Water Resources team in Fort Worth, TX just opened an entry level position.  Could you please share this information with the May 2015 graduates? See below.

Thank you, Sheena

Sheena BartholdJacobsRecruiter | Talent Acquisition817-347-5386 [email protected] www.jacobs.com

Jacobs World: http://www.jacobs.com/jacobsworld

Civil EIT Entry Level- Water Resources Engineering (May 2015 graduate)

Page 21: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

21

Our Fort Worth, TX office is seeking a future graduate to join our established Water Resources group.  Responsibilities include but are not limited to;

Performing Hydrologic and Hydraulic design calculations and preparing reports, studies, construction plans and specifications as required by assignments

Coordinating project assignments with others in project team  Researching local, state and federal code requirements

Experience

Bachelor of Science in Civil Engineering is required Appropriate course work in water resources is required EIT is required Prefer previous internships in hydrology and hydraulics in progressive design responsibility

pertaining to a variety of water resources projects Experience in preparing reports and studies Experience in preparing construction plans and specifications   Any experience with the following computer programs considered a plus:  AutoCAD, LDD, Civil

3D, Microstation would be highly beneficial  Experience with HEC-RAS and HEC-HMS is preferred Experience in use and applications of advanced hydrologic and hydraulic modeling software such

as InfoWorks suite for development of both 1D and 2D flow models Any experience with USACE and other federal entities would be a plus   Experience specifically with large channel modeling, analysis, and plan production a plus Personally committed to succeeding on each project and willing to put in extra time and effort

needed to make it successful under difficult time constraints. Must have excellent verbal and written communication skills

Interested candidates should send their resume to [email protected].

From: Tara S. Eschenfelder [mailto:[email protected]] Sent: Tuesday, March 17, 2015 3:14 PMSubject: Job Opening - Delta Airport Consultants, Inc.

Good afternoon, Lona.

I spoke with you last week about a job opening that we have with Delta Airport Consultants, Inc. in Charlotte, North Carolina.  Attached is a job description detailing our 2-year LAUNCH program for college graduates with a civil engineering degree.  Any interest in aviation is a plus.  We are looking for 2-3 strong applicants who will be graduating in spring 2015 and ready to start work at the start of June!  I appreciate your assistance in sharing this information with the students. 

Students with either a BS or MS in Civil Engineering may apply for the Associate, Civil Design Program position by sending me an email with their resume and a one to two-paragraph explanation of why they are interested in the program.  Applications are requested Applications are requested by March 31, 2015.

Page 22: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

22

Please call with any questions.

Thank you for all of the help!Tara

Tara Eschenfelder, P.E., C.M.Human Resources AdministratorDelta Airport Consultants, Inc.9711 Farrar Court , Su i te 100, Richmond, VA, 23236WWW.DELTAAIRPORT.COM

3/25/15Howdy Dr. Lowery!

I hope all is well for you back in Aggieland.  I still can’t believe it is going on 11 years since I graduated.  Even after all this time has passed it still feels like I was just in class yesterday!  Life has been good since we last spoke.  I’ve gone from being the Assistant Area Engineer in Liberty to becoming the Area Engineer last July after my previous AE moved up to become a Director.  It has been a great experience with a lot of unique challenges. 

I’m hiring a 2nd EIT for the office and wanted to see if you could get the word out to the graduating seniors.  The job duties for the EIT would include developing routine maintenance contracts, inspecting construction, assisting in plan development, and any additional day to day duties as they come up.  Our office is on US 90 between Houston and Beaumont.  It is about 45 min each direction to either city and we are experiencing a lot of growth and development with Houston expanding to the east and soon we will have approximately 38 miles of the Grand Parkway (3rd loop around Houston) that will be built in my two counties.  I’ve attached a map of the area office location. 

I am also looking to hire a summer employee to assist us with our summer construction work load and I’ve attached a flyer with some information regarding that program. Please see http://Lowery.tamu.edu/announcements/OmarTxDOT.pdf

Potential candidates can visit www.txdot.gov to fill out an application.  If any candidates have any questions please have them contact me via email or at the office number listed below.

Please let me know if you have any questions and thank you for your assistance!

Omar Xavier De Leon, P.E.Area EngineerLiberty Area Office936/336-2244

Drive Smart in Winter Weather

Page 23: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

23

From: Alyssa Wisnoski [mailto:[email protected]] Sent: Thursday, March 26, 2015 4:31 PMTo: [email protected]: Full-time position

Dr. Lowery,

Gessner Engineering is currently searching for a full-time Geotechnical, EIT. The candidate can be an undergraduate or graduate student that is graduating in May. Would you please spread the word?

http://www.gessnerengineering.com/gessner-careers/

Thank you,

Alyssa S. Wisnoski | Director of Human Resources  Gessner Engineering, LLCwww.gessnerengineering.com 2501 Ashford Drive, Suite 102College Station, Texas 77840Civil | Structural | Geotechnical | Land Surveying | Construction Materials Testing State of Texas HUB CertifiedCollege Station | Brenham | Fort Worth | San Antonio

4/2/15Good morning Dr. Lowery! I hope you are doing well and still keeping everyone in line there!

I’m emailing you today to ask you to pass along a request for resumes to your students – I’m looking for a full time EIT for land development. See below.

Compass Civil Engineering & Consulting, LLC is a growing land development design firm specializing in residential, commercial, and retail projects. The majority of our projects are in the DFW and Waco areas. I am currently accepting resumes for a full time EIT position. Land development experience is preferred.

Job Description:

Learn project management position: Coordinate, monitor, and review engineering projects and preparation of plans for an assigned area of responsibility.

Prepare construction documents for civil infrastructure and site improvements for residential or commercial land developments including: site planning, grading, site hydrology and

Page 24: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

24

drainage, soil erosion control, underground utilities, paving/roadways, and civil/site permitting. 

Coordinate gathering of data and compilation of information necessary to complete project assignments. 

Prepare reports , maintain accurate records, notes and other required documentation for assigned projects. 

Ensure that assigned projects are completed within the guidelines established by local, state, and federal laws, regulations, standards, and/or policies.

Attend meetings with supervising P.E. as needed or requested to address engineering issues related to assigned area of responsibility.

Requirements:

Bachelor's Degree in Civil Engineering from A&MEIT certification (or proof of passing FE Exam if about to graduate)

Great work ethic and a sense of humor Proficiency in Auto CAD and Civil 3D

Feel free to visit the website: www.compassce.com

Thank you,

Clint Lannen, P.E.President: 214-534-5803Compass Civil Engineering & Consulting, LLC

4/3/15

Greetings All

Page 25: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

25

I wanted to reach out to you all and once again request assistance with recruiting several qualified candidates to fill a need we have for Structural Design Engineers and BIM/Revit Technicians.  I hope to increase our recruiting activity by sending this request directly to you all.  Please feel free to pass along this email and have them contact me directly or through the Career Center regarding these positions.  We have a strong contingent of Aggies in our office that are thriving designing and managing our projects.  Contact me with any questions and thank you for your assistance. 

Thank you

James Sneed, Jr., P.E., CPSM, LEED AP

TX Registered Engineering Firm F-8414144 North Central Expressway, Suite 1100Dallas, TX 75204Phone: 214-824-3647Fax: 214-824-2586 E-mail: [email protected]: 214-824-1135 ext. 161Mobile: 972-953-9891

4/3/15Howdy Mr.  Lowery,

Hope you are well.  Annually, we post at Texas A&M, the attached civil engineering internship. See http://lowery.tamu.edu/announcements/Fieldturf.pdf  

We have always been very successful in recruiting quality students with your help and through the career center-Aggies.  Once again, we are looking for a student to join Fieldturf this summer and finding a shortage of applicants to choose from.  Do you know of CE students still looking for an internship that you can refer?  We would appreciate your help as always.

Best regards,

[email protected]

Some offers are very brief, like this student internship notification:

4/6/15

Page 26: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

26

NOAA Internship in Fort Worth

https://www.usajobs.gov/GetJob/ViewDetails/396238000

Frank

4/8/15From: Olivera, Francisco Sent: Wednesday, April 08, 2015 1:15 PMTo: Lowery Jr, Lee LCc: Sukheswalla, Zubin ([email protected])Subject: Job opportunity

See Http://Lowery.tamu.edu/announcements/AECOM.pdf or below for details.

Lee,A former student of mine is looking for an Aggie for his company. See position description below and attached. Could you forward it to our seniors?Thanks,Paco

The Dallas office of AECOM is looking for an entry-level Water Resources Engineer to fill our growing needs.  The  113055BR Entry-Level Civil Engineer (Water Resources) is available for applicants to view and apply to at www.aecom.com>Careers>Search Jobs>Search Openings and by entering 113055BR in the Requisition/Vacancy No. field.

The direct link to the position is below and also attached as a pdf.  113055BR,Entry-Level Civil Engineer (Water Resources)

Alternatively, applicants can also directly email [email protected] their pdf resumes referencing “113055BR Entry-Level Civil Engineer (Water Resources)” in the Subject Line.  Thanks.

Zubin Sukheswalla, PE, CFMManager, West/Gulf Coast RegionD 972.735.3040 C [email protected]

AECOM16000 Dallas Parkway, Suite 350, Dallas, Texas  75248T 972.735.3000 F 972.735.3001 www.aecom.com

4-10-15

Civil Engineering Position Open at McClure & Browne Engineering/Surveying, Inc

Page 27: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

27

I am sending you this email for posting on your listserv to let civil engineering students know that our firm has a full time/part time graduate engineering position available.  We are looking for an individual that will be graduating in May that can start work immediately on a part time basis and full time upon graduating in May.  Although we would like for the individual to begin work immediately, we are still interested in receiving resumes from individuals who are graduating in May but cannot begin work until after graduation.  This is a great opportunity for someone to gain very valuable experience in general civil engineering and a wonderful place to begin their career.  Those interested in the opening should send their resume (in pdf format) to me at [email protected].

I really appreciate your help regarding this matter.  If you have any questions, please feel free to contact me.  Have a great day!

Dale --

J. Dale Browne, Jr., P.E., CFMPresident

McClure & Browne Engineering/Surveying Inc.1008 Woodcreek Drive, Suite 103College Station, TX 77845(979)693-3838www.mcclurebrowne.com

4/15/15Good Afternoon Dr. Lowery,

I hope you are well. My company is looking to fill another position. We did hire a CE undergrad last May who has worked out very well for our team!  Please see the listing beloow.

I’d greatly appreciate if you can include this your CE job listings.

H2B, Inc. is seeking to fill a position for an experienced civil engineer.  The engineer will work as part of a team on projects that will likely include civil site designs (layout, grading, drainage design, detention pond design, etc), transportation related designs (horizontal and vertical alignment design, hydraulic design, traffic control, etc), and building designs (structural design for metal building foundations, and wood, steel, masonry, and concrete superstructures and miscellaneous structures). Tasks may include project design (both calculations and CAD), attending project meetings, obtaining permit approval through various municipalities, and handling client requests.

The ideal candidate will have the skills necessary to work in AutoCAD and MicroStation.  In addition, experience with Geopak software is a plus.  Prefer 2

Page 28: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

28

years of experience, but flexible for the ideal candidate, with pay commensurate to experience.

Please send resumes to:[email protected]

Thank you,

Travis E. James, EITProject Engineer

H2B, Inc.1225 North Loop West, Suite 800Houston, TX 77008

4/23/15Dr. Lowery:Man was I surprised when the young lady gave me your name as the contact for advertising a job opening.  I am so pleased that you are still around!  I hope the years past have been good to you and your family and that future years are glorious.

Now, the point of my contact: 

I have a job opening for an Assistant County Engineer.  Could you help me advertise this opening among your students – those who are nearing graduation?  The work of the County Engineer doesn’t necessarily need the credentials associated with an E.I.T. or P.E.; however, those attributes always bring additional credibility.  At a minimum we need a graduate civil engineer, ideally someone familiar with road/bridge construction means and methods, can review plans, and can schedule work and budget for projects.  I am nearing retirement and will remain here long enough to train a “green” recruit; however, if there is one of those unique students that came into an engineering program after being in the field or grew up around construction --- well, that would be ideal.  Regardless, I’d be happy to consider any smart and energetic graduate who enjoys a challenge.

Let me know if you have any prospects.   

Thank you,Jerry H. Borcherding, P.E.Director of TransportationHays [email protected] 738 2080(Class of ’73)

Page 29: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

29

Dr. Lowery,It was nice talking with you again earlier this afternoon.  Glad to hear you are still with the University.  So we are looking to hire an EIT out of school interested in land development civil engineering here in Austin, TX.  The candidate should be interested in obtaining his or her PE license while working directly under a licensed engineer.   The candidate should have a gpa in the range of 2.5 to 2.8 with extracurricular activities participated in while attending the University.  We are quite busy at the moment working on a number of apartment, hotel, pad site/shopping center and subdivision projects in the central Texas area and are looking for someone who wants to help us grow.  I have also attached a marketing brochure that tells a little bit more about us.  I appreciate any help you can give with passing this on to the graduates you feel would be a good fit. (See http://Lowery.tamu.edu/announcements/Noble.pdf)  Ryan Irion, P.E.Project EngineerNoble Surveying & Engineering Works, LLC7614A Hwy. 71 WestAustin, TX 78735512-535-1820 ofc512-789-1587 cellwww.noble-tx.com

From: Silberstein, Doron [mailto:[email protected]] Subject: Civil Engineering Intern

Good Afternoon Laura,

Thanks for taking the time to speak with me this morning, your help was greatly appreciated. I tried reaching out to Dr. Lowery but his phone has been busy; would you mind passing this email on to him?

I posted the internship information on A&M’s webpage and received an ID # 68829

If you know anyone who would be interested, please have them apply at:

http://www.austincityjobs.org/postings/47916

Again, thank you for your help.

Let me know if you have any questions about the position.

Doron SilbersteinHuman Resources AdvisorCity of Austin - Public Works Department 512-974-7033 (o) 512-974-2391 (f)[email protected]

Page 30: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

30

4/28/15Dr. Lowery - Please post the following job opportunity to the C.E. Listserve. 

Goodwin & Marshall, Inc. (G&M) is currently seeking recent civil engineering graduates or students that are preparing to graduate in May 2015 for a full-time position.  This is an excellent opportunity for students with little or no experience to start their civil engineering career. 

Civil EIT (0-2 years) Required Education and Certificates:

A Bachelor Degree in Civil Engineering EIT or in the process of taking the Fundamentals of Engineering (FE) exam

REQUIRED Experience: Minimum 0-2 years of civil engineering, design and drafting

G&M is a full-service civil engineering consulting firm headquartered in Grapevine, Texas.  Our principal focus is new development and municipal infrastructure, with an emphasis on residential and commercial/industrial projects.  Founded in 1986, G&M provides the full range of engineering and development services required to successfully develop property, including; land planning, zoning, platting, site planning, civil construction plan preparation, and surveying.  Additional information can be found on our website at www.gmcivil.com. 

Students interested in this opportunity can apply by sending their resume to [email protected].

Matt Baacke, P.E., F IGHT IN G TEX A S A GG IE C LA S S OF ‘ 02        

            2405 Mustang Drive                     Grapevine, Texas 76051817.329.4373 (o) | 817.329.4453 (f)   www.gmcivil.com  |  [email protected]

5/5/15Dr. Lowery,

Please pass this on to your students. 

We are looking to hire 1-2 summer interns. It is a paid positon at $12.50 per hour.  Work hours are M-F, 8:00 am – 5:00pm.   If interested; please send resumes to: [email protected]

Engineering Webpage: http://www.ci.san-marcos.tx.us/index.aspx?page=350

Page 31: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

31

JOB SUMMARYUnder the supervision of a licensed Professional Engineer, the intern assists the Project Manager on Capital Improvement projects (primarily water, wastewater, streets, and drainage), updates standard details and specifications, prepares schedules and correspondence and performs development review activities of the division. 

ESSENTIAL FUNCTIONS1.    Assists Project Manager on Capital Improvement projects:

         Collects, analyzes, and interprets engineering, operational, and maintenance data to develop engineering solutions and define project scopes.

         Assist with the management of professional services contracts ensuring design is in conformance with the City’s Design Guidelines; and budgets and schedules are maintained.

         Applying engineering principles, develops and reviews plans, specifications, cost estimates and reports; evaluates proposals, and makes recommendations to ensure projects comply with the City of San Marcos and governmental standards.

         Develops and prepares construction specifications and bid documents.          Assists with the management of construction contracts and monitors compliance with plans

and specifications. 2.    Serves as engineering liaison to the development process:

         Attends meetings with developers to explain city, state and federal regulations         Researches and applies city ordinances         Reviews public infrastructure plans for conformance with the City’s Design Guidelines         Coordinates with other departments, including but not limited to the public operations

departments.3.    Supports senior engineers with various activities, including but not limited to design analysis and

calculations, design drawing production, technical specifications production and review, cost estimation, field investigations, and construction oversight.

4.        Miscellaneous:         Assists with internal and external public awareness efforts through community presentations

and make formal presentations to public boards and commissions         Assists with the development and maintenance of design standards, technical specifications,

and standard construction details         Maintains CIP project schedules in Microsoft Project and provides updates to other

departments.          Responds to customer inquiries and concerns         Performs other routine and/or specialized duties relative to area of assignment as required.

DECISION MAKING         This position works under general supervision.           Must have ability to prioritize workload.

MINIMUM REQUIREMENTS         Pursuing a Bachelor’s Degree in Civil Engineering or related engineering field from a nationally

accrediting agency.         Must possess a valid Class C Texas Driver’s License with an acceptable driving record.         Able to use word processing, spreadsheet, database, and presentation software.

JOB DIMENSIONS         Must be able to read/comprehend regulations, municipal codes, technical specifications, reference

manuals, budgets, contracts, and project/engineering documentation.         Effective verbal and written communication skills are required.

Page 32: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

32

PHYSICAL DEMANDS AND WORKING CONDITIONSPhysical requirements include lifting up to 25 pounds occasionally.  Subject to vision constantly; handling, fine dexterity, hearing and talking frequently; standing, sitting, walking, lifting, carrying, pushing/pulling, reaching, balancing and foot controls occasionally; kneeling, crouching, bending, twisting and climbing rarely.

Working conditions involve exposure to variable and/or extreme weather conditions, vehicle traffic, general construction hazards, heavy equipment, and open trenches when visiting job sites.

Thanks

Shaun Condor, PE, PMP  - Senior EngineerEngineering/Capital Improvements630 East HopkinsSan Marcos, TX 78666City of San Marcos(512)[email protected]

5/10/15Dr. Lowery

Greetings, from one of your former students (circa 1990).  I would like to see if you could distribute a flyer to the undergraduate students.  The Houston office of TTI is looking for a couple of student workers for the summer.  Would you be willing to forward the attached announcement to the student groups or any students that would be interested in working in the Houston office for the summer.

Please see attachment at http://Lowery.tamu.edu/announcements/TTI1.pdf

Thanks,Rob

Robert J. Benz, P.E. Research EngineerTeens in the Driver Seat Regional CoordinatorTexas A&M Transportation Institute

701 North Post Oak Suite 430Houston, Texas 77024 Direct   713-613-9218Main     713-686-2971 x15118 CS       979-845-2515 Email    [email protected] web      http://tti.tamu.edu/

5/15/15From: Ali Aljamili [mailto:[email protected]] Sent: Friday, May 15, 2015 10:11 AMTo: [email protected]: Rachel HaydenSubject: P.E. Job Opening

Page 33: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

33

Dr. Lowery,

I was one of your students that graduated in May 2014 and now I am working for a company called Hayden Consultants in Dallas, Texas. It is fairly small right now but it is increasing in number and we have offices to fill.

I am sure that you know many qualified graduating engineers but my boss has hired lots of EITs and we are looking for an experienced P.E. to join us doing general civil work. Please let me know if you have anyone in mind.

Please see attachment at http://Lowery.tamu.edu/announcements/Hayden.pdf

Best Regards,

Ali Aljamili, EITHayden Consultants, [email protected]

http://www.haydenconsultants.com/

5/20/15Hello All,

I have been contacted by Christopher White, Senior Bridge Engineer, at Volkert <www.volkert.com>. He is looking for applicants for bridge engineering positions in their new office in Houston (located in the Woodlands).

Students should submit their resumes to the human resources department ([email protected]) and copy Chris ([email protected].

Please forward to any students you think may be interested.  I am also asking Stefan to forward to the SEAoT president to distribute to their group.

Thanks,Mary Beth

5/26/15Good afternoon Mr. Lowery,

My name is Angel and I am a project coordinator with ATS Engineers based in Austin, TX. I reached out to the college of engineering earlier today and I was directed to you as the point of contact for engineering careers. Please find attached a letter regarding the position we currently have open at our company. I am happy to answer any questions you may have or please let me know if you need anything further from me.

Page 34: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

34

To apply, please see http://Lowery.tamu.edu/announcements/ats.pdf

Thank you much,

Angeli CamenforteStructural & MEP Project CoordinatorATS Engineers, Inspectors and Surveyors4910 West Hwy 290Austin, Texas 78735www.ats-engineers.com

5/27/15From: Janney, Michael [mailto:[email protected]] Subject: Army Environmental Command - Civil Engineering Fellowship - Dugway, UT

Good Afternoon,

My name is Mike Janney, I am a recruiter for Oak Ridge Associated Universities (ORAU).  I oversee the ORISE fellowship program with the Department of Defense. The U.S. Army Environmental Command at the Dugway Proving Grounds, Dugway UT, has an immediate need for candidates with Civil or Environmental Engineering background.  The appointment is projected to last at least two years and could be extended longer.  Qualified candidates MUST be U.S. Citizens and have completed either a BS or MS in Civil or Environmental Engineering within the past five years.

To apply, the candidates will need to complete an application at www.orau.org/maryland. Once the application is completed, the candidate will submit their created profile to Project ID: AEC-2356687199.

Feel free to contact me if you have any questions! 

Mike Janney, MAScientific Assessment and Workforce DevelopmentRecruiterORAU(410) 306 9217 (office)(410) 618 7981 (cell)

6/2/15Mr. Lowery:

CivilTech Engineering is currently looking to bring on a recent graduate with a Master’s Degree in Water Recourses.  I have attached a job description for you use and would appreciate your assistance in reaching out to the Civil Engineering Students. See attachment at http://Lowery.tamu.edu/announcements/CivilTech.pdf.

Please have them call me directly.  Please call me with any questions and thank you in advance for your assistance.

Page 35: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

35

Best Regards.

Julian Garza Jr., P.E., C.F.M.Sr. Project Manager

CivilTech Engineering, Inc. 11821 Telge Road Cypress, Texas 77429 Office: 281-304-0200 Fax: 281-304-0210 [email protected] www.civiltecheng.com

From: Jordan T. Easterling [mailto:[email protected]] Sent: Wednesday, June 17, 2015 5:48 PMTo: Lowery Jr, Lee LSubject: SGH Hiring in San Francisco

Lee,

Thank you for your response. I have attached the job description for the role at SGH we are looking to fill with a sharp, driven Texas A&M alum. Please see http://lowery.tamu.edu/announcements/SGH.pdf.

Please have the potential candidates copy me in their resume submission so that I can talk directly to our team in San Francisco.

Again, thank you and feel free to call me if you have any further comments or questions.

Regards,

Jordan T. Easterling, P.E. (CA)Staff II - Building Technology

SIMPSON GUMPERTZ & HEGER www.sgh.com

From: Foley, Robert J [mailto:[email protected]]Sent: Wednesday, June 24, 2015 10:40 AMSubject: CIVIL ENGINEER, BUREAU OF LAND MANAGEMENT, DEPARTMENT OF INTERIOR

Please disseminate this job vacancy announcement as you deem appropriate. The announcement is open until July 7, 2015. It is a GS 11 professional engineer position that will require pursuit of a PhD to qualify.

Page 36: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

36

I am available to assist anyone interested in applying.

Bob Foley   ‘69Assistant Director of Experiential Education Texas A&M University209 John J. Koldus Building1233 TAMUCollege Station, TX 77843-1233New Email Address: [email protected] Tel. 979-845-7725  Fax 979-845-2979

-----Original Message-----From: [email protected] [mailto:[email protected]]Sent: Tuesday, June 23, 2015 11:44 PMTo: Foley, Robert JSubject: Diversity Notification

We are pleased to announce a new, exciting position available at BLM - BUREAU OF LAND MANAGEMENT. It is our hope that qualified, career oriented individuals at your organization will actively consider this position and apply accordingly. Efforts on your part to disseminate this information are greatly appreciated.

Position Information:

Job Description: Civil EngineerAnnouncement Number: OR-DEU-2015-0169Location(s) of position: Eugene, OR, USSalary: $58,562 - $76,131Applications will be accepted from 06/23/2015 to 07/07/2015.

For additional information on this job posting, please go to: https://jobs.mgsapps.monster.com/blm/vacancy/viewVacancyDetail!execute.hms?orgId=3&jnum=112685

This is a head-hunter. It might be good for something temporary while you’re looking for a real job at a competitive salary.

6/24/15Hey professor Lowery, this may be a good opportunity (see below) for any graduates looking for work.

Cheers, Ross Ozuna

From: Matthew Johnson Sent: Wednesday, June 24, 2015 9:47 AMTo: DL Houston AllSubject: Fresh Grads

If anyone has any friends or family that recently graduated with a degree related to science, technology, engineering, or mathematics – and has an out-going and assertive personality – let

Page 37: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

37

me know. We have a client that is looking for 30 fresh grads here in Houston. Successful candidates will be working with a Project Manager to ensure delivery on-time and within budget. Technical writing and documentation will be a big part of this job.

Base: low to mid 40s with an annual bonus that will take them into the 50s. Lunches paid for. Onsite gym. Health, dental, and vision 100% paid for by employer.

Call me with any leads or questions.

Regards

Matthew Johnson Branch Manager, Engineering

Addison Group [email protected] West Loop South, Suite 300Houston, TX 77027 713.850.9500 Office 713.561.6311 Direct 

From: Govil Chiranthana [mailto:[email protected]] Sent: Wednesday, July 01, 2015 1:28 PMTo: Lowery Jr, Lee LSubject: Graduate Engineer

Dr. Lowery,

It is with great pleasure I am writing you this email about a graduate engineer position available in our Dallas office. Please forward this information to all my fellow aggies.

The position requires the candidate to have a MS/ME in Civil engineering ( Structural ) and we prefer spring/summer 2015 graduates.

Hoping to hear from you soon.

Thanks and Gig ‘em  Govil ChiranthanaGraduate Engineer - Dallas OfficeRogers Moore Engineers, LLC17950 Preston Road, Suite 950Dallas, TX 75252214.420.0116gchiranthana@rogersmoorellc.comwww.henderson-rogers.com

7/7/15Dr. Lowery,

Page 38: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

38

Hope this email finds you well. We are looking for some summer/December graduates for our Land Development department. I attached both a PDF and a word file with the text for the position description. I was hoping you would be able to get the notice out to the students.  I appreciate any help you can give us.Land Development EIT – 0 Years Experience

Costello, Inc. has an immediate need for summer/December civil engineering graduates for full time positions in our Land Development department as project engineers. These positions will be responsible for the design of paving, sanitary sewer, water systems, and drainage for our residential and commercial master planned community projects. Additionally, these positions are responsible for the preparation of contract documents and technical specifications, including the public bidding and administration of construction contracts associated with the various engineering projects.

Project engineers will also coordinate the civil design with other engineering disciplines including water/wastewater, drainage, geotechnical, electrical, structural, surveying, and transportation as needed for individual projects. Project engineers will also facilitate the review and approval process with the various public agencies. This position requires a BSCE. Actual applicant only should apply. No headhunter referrals. Please send resume to [email protected]. No phone calls please.

Costello Inc. is located in Southwest Houston and is one of the premier land development firms in the Houston area. We offer an excellent salary and benefits package including: medical, dental and life insurance, 401(k) with match, cafeteria plan, casual dress code, vacation pay, sick pay, flexible schedules, 4 ½ day work week, team atmosphere and so much more! Additional information about the company is available on our website at www.costelloinc.com.

Respectfully,J. Stephen Wilcox, P.E., CFMPartner / Project ManagerHydrology & Hydraulics

 Costello Engineering & Surveying  costelloinc.com9990 Richmond Avenue | Suite 450 North Building | Houston Texas 77042

Voted #1 Best Places to Work - Houston Business Journal

7/7/15Hello Dr. Lowery,

I am reaching out to you because I am hiring and would like your help again. I have a new position to fill here in our Dallas office. Hoping you would still have some contacts for us to consider. This is for an EIT with some experience. I personally would consider a graduating senior as well if they demonstrated the maturity. Please share. Interested applicants can apply on our website (www.core-eng.com) and contact me directly ([email protected]) with any questions. Here is the description…

Page 39: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

39

Designer II – Engineer in Training·         Bachelor of Science in Civil Engineering (or equivalent) from ABET accredited University·         3 – 5 years of experience with program based clients·         Proficient with AutoCAD, WaterCAD, ICPR, and other design software·         Working knowledge of Grading and Storm Water Management·         Strong communication and organizational skills·         Practical and Functional Knowledge of Municipal codes and constructability·         Responsibilities Include:

o   Production of Civil Construction Plans and Design Reportso   Coordination with other disciplines in support of deliverable completiono   Maintain task budgetso   Preparation of design calculations and reports under the supervision of a Project Engineer / Managero   Prepare Due Diligence Reports under the supervision of a Project Engineer / Manager

Thank you,

Charles F. Dibrell, III, PE, CFM (Tre’)Core States Group12700 Hillcrest Road, Suite 192, Dallas, TX [email protected]| www.core-eng.comengineering   |   architecture   |   program management   |   development services   |   construction services   |   sustainability_________________________________________________________________________________________                                          georgia | new jersey |  massachusetts  |  missouri  | florida  | north carolina  | arkansas  | california  | pennsylvania | washington | texas | illinois

7/13/15

Good morning Amanda,

We just posted a position for a new CE grad that would involve highway design projects. The opening is in our Austin office. If you know anyone that might be interested, please forward this link or have them contact me at [email protected].

http://careers.atkinsglobal.com/job/highway-engineer-i-jobid-us-002384

Regards,

Rob Bailey, PEHighway Design Manager 

ATKINS

6504 Bridge Point Parkway, Suite 200, Austin, Texas, 78730 |Email: [email protected] | Web: www.atkinsglobal.com/northamerica   www.atkinsglobal.comTwitter: www.twitter.com/atkinsglobal | Facebook: www.facebook.com/atkinsglobal LinkedIn: www.linkedin.com/company/atkins | YouTube: www.youtube.com/wsatkinsplc

Page 40: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

40

From: Adleman, Lindsey [mailto:[email protected]] Sent: Monday, July 13, 2015 5:39 PMTo: Burris, Mark WSubject: Challenge by Cintra- Internship Program

Hello Professor Burris,

My name is Lindsey and I’m part of the HR team here at Cintra US in Austin. I wanted to reach out to you today to share some information about a current internship program for which we are recruiting. Below is a brief description, but more information can be found in the attached brochure.

Challenge by Cintra is an internship program that provides young professionals the opportunity to spend a year working for one the world’s leading private developers of transportation infrastructure. Participants have the opportunity to gain international perspective within the business environment by working in two different countries with internationally diverse colleagues. This is a tremendous opportunity in professional development and a great international learning experience.

During the 1st year of the program (2014-2015), Cintra offered 8 international intern positions:

4 candidates from Spanish universities 3 candidates from US universities 1 candidate from a Portuguese university

The first 6 months of the program will take place at one of Cintra’s corporate and business areas in your home country. After, you will improve your skills with additional practical training for 6 months abroad in one of the international locations where Cintra operates (United States, Canada, Australia, Spain, Ireland, UK or Portugal).

We are in the process of collecting applications for this program, and would so appreciate it if you could pass along this brochure to anyone whom you think may be interested. Applications are due by August 16th and instructions can be found in the brochure. We really appreciate any help that you could offer in assisting us to promote the program to any students who may be interested. If you have any questions at all, please feel free to reach out to me directly.

Kindest Regards,

Lindsey AdlemanHuman Resource Intern9600 Great Hills Trail, Suite 250E | Austin, TX 78759

From: Kwiatkowski, Peter [mailto:[email protected]] Sent: Thursday, July 23, 2015 2:58 PM

Page 41: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

41

To: Warren, Lona SSubject: FW: FSU Career Center and ProfessioNole

To Whom it May Concern:

Can you please post this job opportunity for any recent graduates?

Thanks,Pete Kwiatkowski, P.G.Resource Evaluation ManagerSouth Florida Water Management Districtwww.sfwmd.gov

 Working Title Groundwater Modeler 2Auto req ID 1442BROrganization WR4204233 Groundwater Modeling UnitLocation WPB Adm Headquarters (B2)Job Description This position provides technical support to the Groundwater Modeling Unit

of the Resource Evaluation Section. Primary responsibilities include data compilation, downloading and QA/QC of hydrological data from the SFWMD DBHydro database or other sources, use of Geographic Information System (GIS) applications to develop and review model input and output, groundwater model application, and documentation.

Candidates must possess advanced knowledge of hydrogeologic principles and inter-relationships including all aspects of the hydrologic cycle.  Some experience with groundwater model development and application using MODFLOW computer code is preferred. Familiarity with Microsoft Office products is required. Experience with programming in FORTRAN and scripting languages are preferred. Strong technical writing and communications skills are necessary. The candidate is expected to work independently and in a team environment.

This position requires primarily office work in West Palm Beach, Florida but may include traveling to other parts of the District and rare field work. Offsite work requires meeting with stakeholders and other agencies regarding assigned projects and includes public presentations of groundwater modeling efforts.  

Due to the District's response role and in the total scope of emergency management, this position may at times be required to provide support before, during and after major storm events and emergency situations, such as hurricanes or other declared emergencies, depending on assigned emergency response role.

Employment GuidelinesTypically requires a Bachelor’s Degree from an ABET/EAC accredited program in engineering, or a Bachelor's Degree in geology, hydrogeology, hydrology or related sciences with 1 or more years of related experience. 

LicensesIncumbent continues the process for attaining State of Florida Professional Engineer (PE) license by receiving Engineer-in-Training (EIT) designation and continuing to accumulate acceptable experience for work time

Page 42: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

42

licensure requirements or Professional Geologist (PG) license requirement. NOTE:  This position may be filled at the lower level of Groundwater Modeler 1.Employment Guidelines:  Typically has a Bachelor's Degree from an ABET/EAC accredited program in engineering, or a Bachelor's Degree in geology, hydrogeology, hydrology or related sciences with less than 1 year experience.  Disciplines for engineering education and experience requirements include Civil, Construction, Electrical, Environmental, and Mechanical engineering.  Licenses:  Incumbent begins the process for attaining State of Florida Professional Engineer license by passing the Fundamentals of Engineering (FE) exam and receiving Engineer-in-Training (EIT) designation.  Employee begins to accumulate acceptable experience to meet work time licensure requirements.

Physical Requirements/ Working EnvironmentDue to the District's response role and in the total scope of emergency management, this position may at times, be required to provide support before, during and after major storm events and emergency situations, such as hurricanes or other declared emergencies, depending on assigned emergency response role.

Salary Minimum $42,598.40

Salary Midpoint: $50,648.00

Salary Maximum $73,028.80

Dr. Lowery,

You may not remember me, but I am a former student of yours (CVEN 385 & CVEN 422). I currently work for the Texas Department of Transportation as an Area Engineer in Sulphur Springs. We have an opening in Sulphur Springs, Texas for an engineering graduate (Engineering Assistant) position. A copy of the job description can be found at http://lowery.tamu.edu/announcements/TxDOT4.pdf. Interested applicants may apply at www.workintexas.com, job posting #2827011. Since the posting is listed in Austin, applicants will need to specify Sulphur Springs when they apply. We would like to have this position filled by the end of August. Any assistance you could provide in getting the word out on this position would be greatly appreciated. If you have any questions, please feel free to call or email.

Sincerely,

Daniel Taylor, P.E.Texas Department of TransportationSulphur Springs Area EngineerOffice: (903)-885-9514

Talk. Text. Crash.

Page 43: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

43

8/7/15Lee,

Good morning. Thank you for taking my call.

This is a direct hire, full time position with my client. They are looking for someone who will grow into the role and desires to get P.E. to help them in other areas of the firm.

Here is the job information direct from my client. The main things they are looking for is E.I.T. and working knowledge of Microstation.

SUMMARY:Looking for an entry level recent college graduate to help with Residential Land Development work and help with all the drawings that were designed 10 years ago and help update with latest codes and cut into “phases”.

REQUIRED: B.S. in Civil Engineering Must have E.I.T. 1+ years of Microstation and design work 1+ years of GEOPAK

o StormCADD knowledge would be nice TXTDOT background would be nice

Feel free to contact me directly at (214) 416-9365

Regards,

Michael KnutsonAssociate Account ExecutiveTSP, Inc.17177 Preston Road, Suite 320Dallas, TX 75248 (214) 416-9365www.mytsp.net Follow Us:  Twitter | LinkedIn | YouTube | Blog | FacebookPeople | Technology | SolutionsCertified Minority Owned

Page 44: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

44

8/10/15

Dr. Lowery, it was a pleasure to speak with you over the phone this morning. Attached you will find our Bridge Designer position description and our one page flyer for posting.

Please see http://lowery.tamu.edu/announcements/Figg1.pdf  and  http://lowery.tamu.edu/announcements/Figg.pdf 

As you may gather from the position description and flyer, we are looking for candidates that will be graduating this fall or next spring (and/or candidates that recently graduated) to fill this position. Given the uniqueness of our firm and our projects, I highly recommend candidates with a passion for bridge design and construction apply. The work we do is unique and candidates excited about bridges will find a high level of satisfaction at our firm.

Thank you for your assistance in this matter and please let me know if you have any questions or comment.

I hope that you have a good afternoon and I will talk with you later.

Sincerely,Matt

Matthew J. Lengyel, P.E., S.E., PMPProject Director, Texas OfficeFigg Bridge Engineers, Inc.10,000 North Central Expressway, Suite 1300Dallas TX 75231(214) 363-3444 (office)

8/17/15Dr. Lowery,

I hope all is well, and that you're gearing up for a fresh batch of Aggies who will undoubtedly change the world!  Over the last 10 years I've worked designing master-planned communities as a civil engineer, designing high-rises, bridges, and stadiums as a structural engineer, and traveling all over the world as an international relief worker.  With such a broad range of experience, I honestly feel like I've landed my dream job with Friendswood Development Company.

We are currently looking for several interested candidates to hire as Project Managers (description attached):

         December graduates          Recent graduates (0-2 years experience)         Licensed professional engineers (3+ years or more experience)

Page 45: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

45

If you wouldn't mind forwarding this opportunity to the listserv, I would greatly appreciate it.  We will be present at the Engineering Career Fair in September, but are accepting resumes now.  Applicants may email me directly at [email protected], using "Project Manager" in the subject line.  Candidates are encouraged to visit our website and connect with me directly via email or on LinkedIn.

Website:  www.friendswooddevelopment.com

LinkedIn: https://www.linkedin.com/in/jkolby

Other information: http://lowery.tamu.edu/announcements/Friendswood1.pdf, http://lowery.tamu.edu/announcements/Friendswood2.pdf.

Sincerely,

Jeb Kolby, P.E.LEED AP BD+C

Project Manager Friendswood Development Company

Office: (281) 874-8546Cell: (936) 870-6858 550 Greens Parkway, Suite 100Houston, TX 77067-4526

On Aug 21, 2015, at 7:27 PM, Kate Khavari <[email protected]> wrote:

Hello, Please let me know who I can contact for job posting to be sent out to your recent graduates or upcoming graduates.  We are looking for approximate 10 new graduates.  I have attached the job posting.  

ASEC Inc. has an immediate opening for a recent graduate with a Bachelor or Masters in Civil/Structural Engineering for a full time position in our Dallas/Ft. Worth office.

Founded in 1991. ASEC is a growing consulting engineering company with offices in Colorado, California and Texas.  We specialize in overhead electrical line design and analysis as well as design and analysis of overhead electrical transmission, substation, and communication structures.  Our structure expertise ranges from customized structural design of new families of self-supporting and guyed structures to analysis and upgrade of existing structures.  Our mission is to design aesthetically pleasing, highly efficient structures of the future, to sustain the structures of the past, while being 100% customer focused and to create lasting relationships with our clients.  At ASEC, we use the most current and scientific & research based design and analysis techniques.  We utilize industry standard programs such as PLS-TOWER, PLS-POLE, PL-CADD. We offer competitive pay and a comprehensive benefit package including Flex working hours.

Page 46: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

46

For more information about our company please go to www.asec-engineers.com

For those who are interested please submit resumes and undergraduate and graduate transcripts to [email protected] 

 

Thank you.

Kate KhavariASEC Inc. | 210 N. Main St., P.O. BOX 6895, Breckenridge, CO 80424(970) 423-6004 Direct | (970)333-0050 [email protected] | www.asec-engineers.comhttp://asec-engineers.com/disclaimer/

Hi Dr. Lee, I am again in the market for a CE undergrad student willing to work part time. The opening is for a CE undergraduate, preferably a Junior, for part time work in my office. This job is available now to the end of the 2015-16 school year. Hours are flexible and would amount to a commitment of about 12 to 15 hrs per week. AutoCAD and basic engineering courses are required. Training will take place as he/she performs their work. Commitment and punctuality are a must. Please have those interested call me at the number below. My office is located at  Metro Center Bldg.3833 S. Texas Ave., Ste. 213Bryan, TX  77802 Thanks a bunch! Chris

Christian A. Galindo, PE, RPLSGalindo Engineers & Planners, Inc.Bryan, TX  77802979-846-8868 WEBSITEhttp://gepinc.net

8/25/15

Page 47: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

47

City of College Station is currently seeking individuals for an Engineering Position (either EIT or PE as attached) depending on qualifications, and an Engineering Programs Specialist.  These positions offer various engineering project and programs management, oversight and review.

We invite you to review the attached information referencing these opportunities.  See http://lowery.tamu.edu/announcements/CS1.docx http://lowery.tamu.edu/announcements/CS2.docx

http://lowery.tamu.edu/announcements/CS3.docx

You can also review this and apply online at http://cstx.gov/index.aspx?page=98.  We offer competitive salaries and comprehensive benefits packages; including retirement and medical.

If you know of someone who might be a fit for this role, please pass along this opportunity.  Whether you have lived here all of your life or are looking to make the move, (click https://www.youtube.com/watch?v=SUd3YcHw5MQ&feature=youtu.be) to view more information about the City of College Station and the community that we serve.

Thanks,

Alan Gibbs, P.E., CFMCity EngineerPlanning & Development ServicesOffice: (979) 764-3570

   City of College Station   Home of Texas A&M University ®

8/26/15

Dr. Lowery,Don't know if you're still handling this kind of thing, but if you'd put this out I'd appreciate it.

Sincerely,

Colin DarbyCivil EngineerEngineering PlansUSAG-Hood DPWEM [email protected]

From: White, Jena R CIV USARMY IMCOM (US)Sent: Wednesday, August 26, 2015 10:12 AMTo: USARMY Ft Hood IMCOM Central List DPW ALLUSERSSubject: Vacancy Announcement (UNCLASSIFIED)

CLASSIFICATION: UNCLASSIFIED

The following vacant DPW positions are announced on the Vacancy Announcement Board.

Page 48: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

48

Civil Engineer, GS-0810-05/07, Engineering Division, Announcement No. WTEF158431741464548PR, Open 24 August 2015, Close 8 September 2015. Open to Student/Internship Program Eligibles.

The Vacancy Announcement Board is located at  https://armycivilianservice.usajobs.gov/

It has been designed to look like the USA Jobs website.  Just click on Army Job Search and make the appropriate selections.  Make sure you select Federal Employees, the system defaults to US Citizens.

Jena R. WhiteAdministrative Support SpecialistDirectorate of Public WorksHuman Resources OfficeFort Hood, Texas☎254-287-2816

Dr. Lowery,

How are you doing? We are hiring civil engineering graduates. Just like you had helped me out in the past I was wondering if you could help me reach out to the civil engineering students. I have attached the job requirements and brief description about my company. Please see http://Lowery.tamu.edu/announcements/ASEC.pdf

ASEC Inc. is a consulting firm specializing in transmission line engineering. They are currently expanding and are setting up a new office in Fort Worth area. More information about the company is available at www.asec-engineers.com

Regards,Pankaj Deshmukh, P.E. | Sr. EngineerASEC Inc. | 210 N. Main St., P.O. Box 6895, Breckenridge, CO 80424(970) 423-6007 Direct [email protected] | www.asec-engineers.com

9/7/15Subject: Jacobs Engineering Group: New Hire NeedsKyle: I will post your email to our jobs listserv as listed below.  If you want to make any changes, just email me back.  I will include your contact email, but not phone number unless you email me back to include it.  I will also tell the students to reply using the existing Subject line above.  Tons of email is easier to purge than hundreds of phone calls. 

Page 49: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

49

: ) Thanks for the information, L^3 From: Salzman, Kyle F. [mailto:[email protected]] Sent: Monday, August 31, 2015 11:17 AMTo: Lowery Jr, Lee LSubject: Jacobs Engineering Group: New Hire Needs Dr. Lowery, I am a former student (02’) and am actively recruiting new civil grads and interns for various offices (DFW, Houston, Austin, SA, Little Rock, OKC).  I believe we have posted on the job board you maintain and wanted to confirm that we were still listed and/or update our listing.  I am going to be in-town next week for Career Fair and the following day for interviews and am looking for Interns and Full-Time talent.   I unfortunately miss-placed our correspondence from a few years ago on this topic and forgot how we accomplished this.  What can I do to get listings posted? Jacobs Engineering Group General:The North American Infrastructure (NAI) group within Jacobs has approximately 3,000 employees who provide engineering design, construction, planning, environmental support, survey, design-build, project management and/or program management for our civil infrastructure clients. Recognized a leader in the EPC infrastructure industry, our team consistently receives high rankings from Engineering News-Record (ENR) in their categories of Top Design Firms, Top Contractors, and Top Transportation Companies. Our clients include but are not limited to highway authorities, rail/transit entities, tollway authorities, land developers, energy providers and water departments. At Jacobs, we help prepare people for new opportunities and challenges. With positions at every level, openings in multiple disciplines, expertise in a range of markets and offices around the globe, we create an environment where you can learn, grow, and thrive. From our competitive benefits program to our Health and Safety initiative of Beyond Zero workplace injuries, we believe that you'll find a flourishing career here at Jacobs. Jacobs Engineering Group Inc. is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. Jacobs does not discriminate in employment opportunities or practices on the basis of: race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, veteran status or any other characteristic protected by country, regional or local law.  

Page 50: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

50

Intern: o Position Summary –

Internship positions at Jacobs provide college students an opportunity to gain real-world experience in their specific area of study. Interns will work alongside world-class professionals in a fast-paced, professional setting which provides interns invaluable experiences applying the knowledge and skills learned through education in a business environment 

o Qualifications – Candidate must be currently enrolled in at least their junior year within

a Civil Engineering curriculum is required. Working knowledge of Word and Excel is required Previous design intern experience on land development proejcts is

required. Knowledge of AutoCAD is required Strong analytical, conceptual, communication and organizational

skills. Ability to effectively interface with all levels of personnel and

management. Ability to work and thrive in a team environment. Strong problem solving skills. Ability to self-motivate and work productively without supervision. Excellent oral and written communication skills.

  Land Development EIT:

o Position Summary – Seeking a dedicated professional in the Land Development industry

who wants to grow their career. The individual shall be capable of and responsible for delivering a quality product in a fast-paced environment and is interested in challenging their skills with a wide range of projects.  

Principal Duties and Responsibilities:· Expertise in civil site work and single family/residential design

including grading, water distribution, sanitary sewer, drainage, and paving

· Ability to work on several projects concurrently.· Experience work with inter-related engineering disciplines.· Ability to focus on the details of a project while understanding

the big picture from the project team perspective.· Coordinates project assignments with those of other engineers

and technicians on his/her project team.· Research City, State, and Federal Codes.· Ability to efficiently utilize time in executing assigned tasks

accurately, on schedule, and within the budget.

Page 51: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

51

· Project cost estimating.· Communicating tasks and schedule with the project team.

 o Qualifications –

Bachelors Degree in Civil Engineering is required EIT certification is required Strong Work Ethic and Commitment to Quality Working knowledge of Word and Excel is required Previous design intern experience on land development projects is

required Knowledge of AutoCAD is required Strong analytical, conceptual, communication and organizational skills Ability to effectively interface with all levels of personnel and

management Ability to work and thrive in a team environment Strong problem solving skill Ability to self-motivate and work productively without supervision Excellent oral and written communication skills

 Thank you!

Kyle F. Salzman, P.E. | Jacobs | [email protected] | www.jacobs.com

9/9/15Dr. lowery could you please send this out to those who are graduating in December:

Howdy! 

HMT is looking for civil engineers graduating in December!

Page 52: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

52

HMT has been one of South Texas' leading Engineering and Surveying Firms since 1977. Centrally located in New Braunfels, TX we are the Austin/San Antonio area specialists.

Engineering Solutions that will stand the test of time.

HMT is a leader in providing engineering solutions for the long term. Involved in all phases of project development from feasibility to construction administration, HMT has the expertise you need for planning new construction, renovations and upgrades. We've worked with numerous size corporations on the federal, state and municipal levels that provide a broad understanding of varied project development processes. Our expertise and commitment to quality allow us to give the latest innovative, refined and cost-efficient solutions to our clients.

Our Services Include:Residential Land DevelopmentCommercial Land DevelopmentMunicipal EngineeringCity EngineeringFeasibility StudiesWater – Planning, Permitting, Resources, Modeling Distribution, Storage, Pumping & TreatmentWastewater – Planning, Permitting, Modeling, Collection, Life Stations, Rehabilitation & Treatment, Discharge PermittingRoadway -  Planning & Design, RehabilitationStorm water/Drainage Planning, Design, Design Criteria and Standards/Ordinances, Modeling Analysis, DetentionStorm water Quality Planning, Design, PermittingFlood Impact StudiesFederal, State, and Local PermittingBidding/Negotiations/ContractsSchedulingCost EstimatingProject ManagementConstruction Management If you would like to learn more please visit the following website. http://www.hmtnb.com If you would like to apply for a full time position please email your resume to:  [email protected]

If you have any question or want more information about working there please feel free to email me at [email protected]

Thank you for your time,Caitlynn Morris 

9/15/15

Page 53: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

53

Lee,Thank you again for taking the time to post to your alumni.  I can honestly say this is one of my favorite companies.  Look forward to hearing from your group.  Anyone may contact me directly at anytime. 

Searching for a Degreed Engineer (Ocean Engineering, Civil Engineering or other with work experience listed below - 15 plus years’ experience.

See http://Lowery.tamu.edu/announcements/AGroup.doc

Appreciate the help.

Kindly,

Tammy WhistonManaging Partner614-340-9565 o614-207-8372 [email protected]

9/22/15Dr. Lowery

Joe Schultz and Veronica Morgan thought you could help me.

I'm trying to find an EIT in general civil or H&H.  I'd like him/her to work 40 hours a week (30 would be ok for a graduate student with experience.)   This person would ideally have good Autocad civil 3d skills, some Arc Map experience, and some full time experience in general civil, H&H, and or transportation.

Our company is located in south College Station, about 10 minutes from the university.  We have a friendly relaxed work environment with excellent potential for growth.  Full time employees have a competitive benefit package, and we have a tuition reimbursement program for qualified employees.  And we're fun.

Please have interested candidates email me a resume (and potential work schedule for graduate students.)

Thanks

Joel Mitchell, P.E.Partner

Page 54: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

54

Mitchell & Morgan, LLPMitchell&Morgan.com3204 Earl Rudder Fwy S.College Station, TX 77845(979) 260-6963 (office)(979) 260-3564 (fax)

9/23/15

Hello Dr. Lowery

Jacobs Engineering Energy Services group is looking to staff up and I was asked to put the word out. It’s a general civil position. The prospective hire will be doing a little of everything, but mostly focusing on Hydrology and Site development.

If you could please forward this email to students and recent graduates and have them email me their resume at [email protected] I would very much appreciate it.

A brochure detailing the work can be found at http://Lowery.tamu.edu/announcements/Jacobs1.pdf

Best Regards,

Nathan Ryan MillerCivil EIT | JACOBS | NAI | Energy Services | Houston, TX - USA | Work: +1.832.351.6430 | Cell: 979.997.3023 |

From: Sheri Loven [mailto:[email protected]] Sent: Thursday, September 24, 2015 11:28 AMTo: Sheri Loven <[email protected]>Cc: William Loven <[email protected]>; [email protected]: ACI 440 - FRP Structural Strengthening of Concrete

Good afternoon,

We are searching for a Civil Engineer with knowledge of the above mentioned subject for a Client that is a multi-billion dollar player in the construction chemicals sector.  If you know of any engineering students that just graduated or close to graduating and are knowledgeable on this subject, we would appreciate if you could put them in contact with us.  The position is Business Development Leader – Structural Strengthening with a generous starting salary and bonus plus an excellent benefits package.  No relocation is required; it is a home office based/Road Warrior type job. 

Please have any interested candidates send their resume to our President & CEO, Bill Loven. His contact information is below.

Page 55: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

55

Thank you for your time and attention.

Best,

Sheri Loven

William LovenPresident & CEOGlobal Recruiters of Westlake Hills4611 Bee Caves Road, Suite 208Westlake Hills, TX 78746t) [email protected] 

10/1/15Dr. Lowery:

Can you send out these two job opening announcements, please?  We’re really looking to fill them as soon as possible.  I’ve also attached a company description and some testimonials from recent Aggies we’ve hired.

Announcements are at http://Lowery.tamu.edu/announcements/Yalgo4.pdf.

Thanks,Scott A. Brooks, P.E., C.F.M.Yalgo, LLC(254) 953-5353, x-1232 office

10/5/15Dr. Lowery,

Hope everything is going well for the Civil Engineering department. I was hoping you still sent out job postings to alumni on the network. We have a job opening here at the TxDOT Sinton Area office for a professionally licensed engineer. I have copy and pasted the job posting found online at the link below. The position would be for a project manager role dealing with roadway construction projects going on in the surrounding counties. We have tons of work starting and more to come as the year ends. I would appreciate it if you could forward this along to any Aggie alumni that have received their PE license and are looking for some construction experience.

Page 56: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

56

Anyone interested should go online to apply at the link below, as the department will not accept direct resumes.

Thank you so much,Ernest Longoria c/o ‘11

https://careers.txdot.gov/psc/pshcma1/EMPLOYEE/HRMS/c/HRS_HRAM.HRS_APP_SCHJOB.GBLErnest Longoria, E.I.T.Engineering AssistantTxDOT-Sinton Area Office11571 US HWY 181Sinton, TX 78387Phone: (361) 364-6415Fax: (361) 364-6429Email: [email protected]

10/6/15Dr. Lowery,

Thanks for your time on the phone this morning. I am looking for a highly motivated Structural Engineer to join my Structural Engineering design team in Amarillo, TX.

My company is Huseman Engineering, LLC. We have a reputation in the region as an outstanding Structural Engineering design firm. Our goal is to bring another engineer onto our staff so that we can continue to meet the growing demand for our services in the same manner of excellence for which we have become known.

Our office is small but growing and provides many growth and learning opportunities. Project types generally consist of new building construction, existing building renovations, and industrial structures.

Job responsibilities will include:- Application of Structural Engineering knowledge, principles and procedures to complete

project assignments- Providing Structural Engineering analysis, design and specifications for buildings and

structures consisting of concrete, steel, masonry, and wood- Communication and coordination with other project team members, both inside and

outside of our office- Application of building code design criteria and to complete structural analysis, design

calculations and markups- Working alone and in collaboration with other design team members to prepare

construction documents or other materials to meet project requirements

Page 57: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

57

- Construction administration duties such as the review of shop drawings, handling contractor questions, and field work

Minimum Qualifications:The qualified candidate must have a B.S. or M.S. in Civil Engineering, with an emphasis in Structural Engineering. Additional training and education will be provided to enable the candidate to increase their professional and technical competence to the level needed to provide leadership to our clients and other project team members.

The qualified candidate must also have strong problem solving skills, communication skills, interpersonal skills, the ability to work independently and the ability to work as part of a project team.

Preferred Qualifications- A working knowledge of Microsoft Office- A working knowledge of AutoCAD- Experience using software programs for structural analysis- Experience in the development of construction plans and specifications- Field experience in the construction industry

If a student or recent graduate possesses the minimum qualifications and at least some of the preferred qualifications, then we want to meet them! Please have them email their resume, a cover letter and a copy of their official or unofficial transcript directly to [email protected] so we can schedule an interview. The interview process will likely include an initial interview over the phone or through Skype, followed by an on-site interview at our office.

Amarillo is located in the middle of the Texas Panhandle and is an excellent place to live with an economy that is stable, strong and steadily growing. There are many area activities and events to enjoy, particularly if you enjoy the outdoors. Amarillo is also the only major city in Texas within 4 hours of the Rocky Mountains. Learn more about the area at http://www.visitamarillo.com/.

Thank you!

From: Tara S. Eschenfelder [mailto:[email protected]] Sent: Wednesday, October 07, 2015 10:16 AM

Page 58: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

58

To: Kelly Brumbelow <[email protected]>; [email protected]: Job Opening - Delta Airport Consultants, Inc.

Good morning, Professors Brumbelow and Hueste.

My name is Tara Eschenfelder, and I am with Delta Airport Consultants, Inc. I was referred to you both when I called in to the Zachary Department of Civil Engineering. We are currently seeking candidates for a full-time, entry-level position starting in June 2016 in our Charlotte, NC office. (We currently have only one Aggie on staff, but that may change.)

I would greatly appreciate your help in notifying the civil engineering students about this open position. If there are any particular students who you think might be a good match for this job, please pass this information along to them as well. We are accepting applications this fall through the end of the day on November 2, 2015. I have already posted the job on the Texas A&M Career Center’s HireAggies.com.

We are a 70-person firm that does work exclusively on airports, focusing in on civil site design. In addition to engineering design and construction services, we offer planning services as well as aviation consulting services. Individuals with a strong interest in aviation, land development, and transportation have been the best fits for working with Delta. Our design process includes elements of grading and drainage design, pavement design, erosion and sediment control design, construction phasing, and dealing with specifications. We do not do any structural or geotechnical work.

Thank you for any assistance. If you have any other suggestions on how to reach out to the civil engineering students, please let me know.

For details, please see http://lowery.tamu.edu/announcements/Delta.pdf.

Tara Eschenfelder, P.E.Human Resources Administ ratorDELTA AIRPORT CONSULTANTS, INC.9711 FARRAR COURT, SUITE 100, RICHMOND, V IRGINIA, 23236WWW.DELTAAIRPORT.COM

10/8/15Good Morning Dr. Lowery,

My company has several internship opportunities in Austin available for summer 2016.  We have an active job posting for transportation and water resources internships and would be very grateful if you could share with the students interested in summer internships.  http://careers.atkinsglobal.com/job/technical-intern-jobid-us-002591

Thank you,Michael J. Skoviera, PE Fightin’ Texas Aggie class of 2009Sr Engineer I, Transportation Design

Page 59: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

59

ATKINS

6504 Bridge Point Parkway, Suite 200, Austin, Texas 78730 | Tel: +1 (512) 342 3263 | Fax: +1 (512) 327 2453 |Email: [email protected] | Web: www.atkinsglobal.com/northamerica   www.atkinsglobal.com

From: Jay T. Griffith [mailto:[email protected]] Sent: Friday, October 09, 2015 3:09 PMTo: '[email protected]'Subject: PE candidates

Dear, Dr Lowery,

It was a pleasure talking with you today. Attached please find a job description for the Welty PE job. Any candidate can check us out at our website, http://thinkwelty.com/   or the job flyer at http://lowery.tamu.edu/announcements/Welty.doc.  The job is in Houston.

Regards,

Jay T GriffithVice President Business Integration

o: (330) 867-2400  |  m: (330) 414-55453421 Ridgewood Rd., Suite 200 Akron, OH   44333 Akron  | Cleveland  |  Columbus  |  Houston

E-mail Disclaimer: www.thinkwelty.com/disclaimer Click here to experience our new Website!

From: Stone, Larry [mailto:[email protected]] Sent: Tuesday, October 20, 2015 9:43 AMSubject: Civil Engineers

Thanks for the phone visit today.  We are a 60-year old firm with civil engineers, landscape architects, planners and architects.  Our website gives good information on the various projects that we typically design.

We are looking to add to our civil engineering staff by adding someone to assist with water/sewer projects and one to assist with transportation/drainage projects.  Autocad proficiency is essential.

Anyone interested can forward a resume to me.  We would also be interested in participating in your professional day in February.

Larry Stone, PE, RPLSAssociate  |  Senior Civil Engineer

Page 60: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

60

   Schrickel, Rollins and Associates, Inc.1161 Corporate Drive West, Suite 200 | Arlington, Texas 76006office: 817.649.3216  |  direct: 817.633.0417  | fax: 817.649.7645 |  www.sradesign.com

From: Charles Norman <[email protected]>Date: Thu, Oct 22, 2015 at 11:11 AMSubject: Re: TAMU WEATTo: Keval Satra <[email protected]>

Pump Solutions is an Aggie owned, young, medium sized municipal water & wastewater equipment distributor in Texas w/pumps & controls as our main product line. This would be a great opportunity for a graduate looking to go right into outside sales, in established territories, and grow with the company. We are looking to immediately hire multiple Outside Sales Positions across our (3) branches in Texas (Dallas, Houston, and Austin). Our primary openings consist of (2) DFW Outside Sales Positions and (1) Houston Outside Sales Position, but if someone is particularly interested in Austin, then we can have that discussion. This is a very technical sales role with an opportunity for immediate success. It's important that the candidate be self motivated and obtain a high work ethic. Training will be fast tracked and ongoing throughout the role.  Interested December graduates or recent graduates may email their resume to Charles Norman, Industrial Distribution Class of ’08, at [email protected]  Have a great day. Charles Norman Pump Solutions, IncDallas/Fort Worth, TX(817) 684-0900 Main(817) 684-0905 Fax(214) 770-3589 Cell [email protected] 

Dr. Lowery,We are looking to hire another Aggie to fill a full time, civil engineering EIT position at our firm, TRC, in the Arlington, Texas office.  Attached is an ad describing the position.  We’re looking for an entry level, recent graduate or upcoming December 2015 graduate.  More information regarding TRC can be found at http://www.trcsolutions.com.

Could you please forward this to anyone that might be interested?  Applicants can email their resumes directly to me at [email protected].   

Page 61: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

61

Civil Engineer (EIT) PositionArlington, TexasTRC has an opening for an entry level Civil Engineer-in-Training (EIT) in their Arlington, Texasoffice. Responsibilities and task assignments will generally include engineering plan andspecification document preparation. Candidate will utilize computer aided drafting utilizingAutoCAD and/or MicroStation design software. Candidate will be expected to decipher Civil sitebackgrounds, work with nested External Reference Files (Xrefs), adhere to company draftingstandards, and create design details from sketches and manufacturers data-sheets. Theposition requires daily interface with in-house design and engineering staff, staying current withCAD technology and techniques, and other related tasks as assigned. Technical focus of workwill include the application of Civil Engineering to site development, industrial facilities, andmunicipal infrastructure including design of roadways, drainage facilities, site grading, water andsanitary sewer utilities.RequirementsCandidate must possess a B.S. degree in Civil Engineering, Civil Engineering Technology, orrelated discipline and have passed the EIT exam. Working knowledge of Microsoft Office toolsincluding Word, and Excel is required. Good verbal and written communication skills are alsoimportant.The environment at TRC is fast paced, with numerous overlapping projects and assignments.Candidate must be flexible, well organized, accountable, and able to work successfully withmultiple project teams and personalities.

Thanks in advance!

Justin Thomas, P.E.Arlington CES Practice Leader

700 Highlander Blvd., Suite 210, Arlington, TX 76015T: 817.522.1014 | C: 214.471.4104

LinkedIn | Twitter | Blog | Flickr | www.trcsolutions.com  TRC Engineers, Inc.  T.B.P.E. # F-8632

From: Matt Baacke [mailto:[email protected]] Sent: Thursday, November 05, 2015 10:49 AMTo: Lowery Jr, Lee LSubject: Goodwin & Marshall Co-op Opportunity Spring-Summer 2016

Dr. Lowery,

Please post the following job opportunity to the C.E. Listserve.  Goodwin & Marshall, Inc. attended the recent Engineering Career fair at A&M and met some excellent co-op prospects, but we would like to meet a few more.  We are interested in Aggies in the Civil Engineering program that were unable to speak with us at the Career Fair and would like to pursue a Co-op opportunity with our company.  

Goodwin & Marshall, Inc. (G&M) is currently seeking undergraduate civil engineering students that are interested in a Cooperative Education Opportunity for the 2015 Spring and Summer semesters.  G&M has a well-defined college cooperative education program and for the last 15 years G&M has worked with co-op programs and students from several universities, particularly Texas A&M University.  We are looking for civil engineering students that have a superior work ethic, a great attitude, and the desire to 

Page 62: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

62

gain actual design experience before graduation.  G&M maintains a full-time staff of 15 professional engineers and surveyors.  Due to the size of the company, co-op students are provided with the opportunity to work closely with the professional engineers on staff.  Consequently, co-op students at G&M are integral to the design process and will be working on real projects with real deadlines and budgets.  

The secondary purpose of the co-op program with G&M is to establish long-term relationships with the highest caliber of engineering student.  Several full-time members of our staff began their careers as co-op students, including a handful of Aggies.  Since G&M implemented the co-op program, over 70 college students (nearly half of them Aggies) have gained invaluable experience that they have utilized to begin successful careers in civil engineering. 

The G&M office is located in Grapevine, TX which is centrally located within the DFW Metroplex.  Additional information can be found on our website at www.gmcivil.com.  

Undergraduate civil engineering students interested in this Co-op opportunity can apply by sending their resume to [email protected].  There is also a job posting on the A&M Career Center website.

G&M will also be at the Career Fair in January for students interested in a 2016 Summer-Fall Co-op.

Matt Baacke, P.E., F IGHT IN G TEX A S A GG IE C LA S S OF ‘ 02        

            2405 Mustang Drive                     Grapevine, Texas 76051817.329.4373 (o) | 817.329.4453 (f)   www.gmcivil.com  |  [email protected]

11/10/15Hello Dr. Lowery,

Thank you in advance for your help in this matter.  Please find the Job Description for the Entry-Level Civil Engineer positions that we have open in Dallas.  The client is ready to interview these entry-level candidates before they try to fill their other positions.

JOB DESCRIPTION:

I have a client in Dallas who is looking for two (2) entry-level Civil Engineers with some sort of TxDOT experience (whether it is part of a school project or an internship).  These entry-level engineers will work closely with designers and engineers on various Civil TxDOT roadway projects.  These Engineers will learn the ins and outs of the Civil Engineering industry in Texas and will become fairly proficient in MicroStation. 

This client is looking for 2 motivated graduates who are looking to work for a well-established (and still growing) Civil Engineering firm in Dallas.  They are ready to interview this week and hire as soon as possible.

Page 63: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

63

QUALIFICATIONS:

-Bachelor’s Degree in Civil Engineering (or about to graduate in December 2015)-EIT license, preferred (not required)-TxDOT knowledge (Preferably from an internship, but from a school project is fine)

If you or anyone you know may be qualified and interested in this opportunity, please send resumes to me at the following:

Christy LewisTechniPower, Inc.Ph# 972-432-8500 x. [email protected]

Dr. Lowery-

Thanks for the prompt response. I have attached a “banner” that tells a little bit about what we do here at Bleyl. It also has our website where some more information about us can be seen. We are currently re-building the website, so some of the information is outdated, but a new one will be up in the coming weeks.

As far as the position available, it is for Graduate Engineers, EIT’s, in either our Conroe or Bryan office.  I can be contacted for additional information.

Please post the following, including our banner.

Bleyl & Associates is currently hiring Graduate Engineers, E.I.T.’s, for their Conroe, Texas and Bryan, Texas offices. As a Graduate Engineer with Bleyl & Associates you will aid Professional Engineers in the design and management of various civil engineering related projects. These projects include land planning and development, water and wastewater Engineering, hydraulics and hydrology and more. For more information please contact Travis Walker, [email protected].

Thank you again for your help and I hope all is going well for you.

Regards-

Travis T.K. Walker, E.I.T.Bleyl & Associates

Page 64: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

64

Office:936.441.7833Cell: 832.257.9199Firm No. 678

11/16/15Please forward to the CVEN listserv. I just spoke with Judge Knight, and they may consider summer internships as well as full-time.

From: Diane Hartfield [mailto:[email protected]] To: Kelly Brumbelow <[email protected]>Subject: Employment Opportunity in Liberty County

Dr.  Brumbelow,Please read the attached letter regarding a position open in Liberty County.  Thank you.

See http://Lowery.tamu.edu/announcements/Liberty.pdf

Judge Jay Knight

11/16/15Dr. Lowery,

I am a 2008 graduate from the TAMU Civil Engineering department and was hoping you could post a job opportunity we are looking to fill.  As we are always looking to add Aggie Engineers to our staff, this would be an awesome opportunity for a former student to return to College Station.  Please see our posting below. 

It’s an exciting time to join Jones I Carter. We have an excellent Project Manager- Site Development opportunity in our College Station office. Lots of opportunity for growth and advancement, competitive salary, and excellent benefits! Check it out: https://careers-jonescarter.icims.com/jobs/1204/project-manager/job?mode=view&mobile=false&width=658&height=500&bga=true&needsRedirect=false&jan1offset=-360&jun1offset=-300

Reneé E. Cousins, P.E.Project Engineer [email protected]

JONES | CARTER 6509 Windcrest Drive, Suite 600 Plano, Texas 75024-3074 Tel 972.488.3880 Ext. 7174   Fax 972.488.3882 Direct 972.265.7174              Cell 214.668.2236

Page 65: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

65

One Company. Unlimited Potential.TM

www.jonescarter.com

11/20/15Dr. Lowery,

Another opening at Fort Hood. Promotion potential is up to GS-11. Anyone interested in the details of the work can contact me directly.

Sincerely,

Colin DarbyCivil EngineerEngineering Plans BranchDirectorate of Public WorksUS Army Garrison Ft. Hood, TXEM [email protected]

The following vacant DPW position is announced on the Vacancy Announcement Board.

Civil Engineer (Recent Graduate), GS-0810-07, Engineering Division, Announcement No. WTEF150465951561600PR, Open 23 November 2015, Close 7 December 2015. Open to Student/Internship Program Eligibles.

The Vacancy Announcement Board is located at

https://armycivilianservice.usajobs.gov/

It has been designed to look like the USA Jobs website. Just click on Army Job Search and make the appropriate selections. Make sure you select Federal Employees, the system defaults to US Citizens.

Thanks

Jena R. WhiteAdministrative Support SpecialistDirectorate of Public WorksHuman Resources OfficeFort Hood, Texas☎254-287-2816CLASSIFICATION: UNCLASSIFIED

11/25/15Howdy Dr. Lowery!

I trust you’re doing well and still helping to shape the minds of Aggieland’s newest generations of engineers. Business is good for my company, and we are currently looking to hire another

Page 66: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

66

young civil engineer, ideally someone with some good internship experience and/or up to 2 years of post-graduate experience.  This company has been wonderful to work for, and the work I do is very rewarding. I appreciate if you will add our listing to your job listing database; we had good luck in the past with one graduate engineer who is still with us and is a very important part of our team. Below is our official job listing.

Graduate Engineer (EIT)H2B, Inc. – Houston (Heights), Texas

H2B, Inc. is seeking to fill a position for an entry-level civil engineer. The engineer will work as part of a team on projects that will likely include civil site designs (layout, grading, drainage design, detention pond design, etc.), transportation related designs (horizontal and vertical alignment design, hydraulic design, traffic control, etc.). The Graduate Engineer is responsible for assisting Project Managers, Project Engineers and Project Designers in the preparation and coordination of engineering drawings.

Responsibilities and Tasks:         Project Design (both calculations and CAD)         Attending project meetings         Prepare and submit permitting application packages         Prepare engineering reports and construction specifications         Utilize MicroStation and Geopak as appropriate to address review comments and prepare

plan updates.         Handle client requests         Conduct field visits to understand existing site or building conditionsEducation/Experience:         Bachelor of Science in Engineering         Engineer in Training (EIT) license obtained or scheduled to sit for exam         Prefer 1 to 2 years of experience

The ideal candidate will have the skills necessary to work in AutoCAD and MicroStation.  In addition, experience with Geopak software is a plus.  Prefer 1 to 2 years of experience, but is flexible for the ideal candidate, with pay commensurate to experience.

About H2B, Inc:H2B, Inc. was formed in 2005 when our Owners, Ken Bryant and Tod Henning, saw a need in the market for experienced engineers to provide personalized service to clients, a benefit large firms struggle to deliver. A Civil and Structural firm, H2B, Inc. was founded on the principles of precise design, innovative solutions and client satisfaction. H2B’s commitment to the design process has garnered respect in the industry and we have developed long-standing relationships with our clients.

In addition to working with first class clients our team members enjoy working in open and collaborative work environments. This past year we were ranked by the Houston Business Journal as one of the top 25 small businesses to work for in Houston. Other perks of working at H2B are flexible working hours, fully stocked pantry and fridge, and the daily ping pong matches.

Please send resumes to:[email protected]

Thank you,

Page 67: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

67

Travis E. James, EITProject Engineer

H2B, Inc.1225 North Loop West, Suite 800Houston, TX 77008713-864-2900 Office

11/30/15Dr. Lowery,

Schultz Engineering, LLC is a local Civil Engineering Firm here in College Station, Texas.  We are currently looking for a May 2016 Graduate that wants to stay in this area an pursue a career in Civil Engineering.  Please post our attached flyer and our request for resumes.  Resumes can

be sent to me at [email protected].

Please see http://lowery.tamu.edu/announcements/Schultz.pdf

Thank you,

Deven Doyen, P.E.Civil Engineer

2730 Longmire Drive, Suite ACollege Station, TX 77845(979) 764-3900 – Office (979) 764-3910 – [email protected]

11/30/15Dr. Lowery,

Thank you very much for your response and information.  I used to send items like this to Janice before she retired and didn’t know where to go since I have not had a graduate engineer position open for 8 years.  

Please see our flyer at http://lowery.tamu.edu/announcements/Irving.pdf. 

Interested persons may email questions about the position to Wayne Lee, City Engineer, at [email protected], but they must submit an application on the City of Irving’s web site at http://www.cityofirving.org/2673/Employment-Opportunities in order to be considered.

Thanks again for your assistance in this regard!

Gig ‘em!

Wayne E. Lee, P.E., CFM | City Engineer Class of ‘90

Page 68: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

68

City of Irving  l  Capital Improvement Program Department825 W. Irving Blvd. Irving, TX 75060P: (972) 721-2778   C: (972) [email protected]  l  CityofIrving.org

 11/30/15Dear Dr. Lowery,

Howdy!

My name is Yaoliang Wu, a Master's student at Texas A&M in Structural Engineering. Can you share the following information with our graduate students? Thanks!

I have a friend who works in HR at the Country Garden, which is one of the top 10 Chinese real estate corporations. She is currently recruiting Ph.D. students, either already graduated or going to graduate within 2-3 years, on behalf of the Country Garden Corporation in Shanghai.

Ph.D. students interested in this position, especially those from China, Russia, India, Thailand and USA, can contact me (Email: [email protected]) or the Country Garden HR, Jia, Jiangxuan (E-mail: [email protected]).

For more specific information please see the attachment at

http://lowery.tamu.edu/announcements/CountryGarden.pdf.

Thanks!Yaoliang Wu

Dr. Lowery,

It was nice to meet you over the phone this morning.  You may remember a former student from a few years back named Mark Rollins.  He is Al Rollins, our founder’s, son.  We have a long history with Texas A&M, and we want to keep it going.

Please post or send the job posting below to any new graduate that you think might be interested.  I would also like to be able to contact them personally if that is possible.  This is a good opportunity for the right young graduate.

We also will be very interested in May graduates and summer interns.  We will be back in touch with you in February.

Have a Merry Christmas

VB

Page 69: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

69

Victor W. BaxterPresident

   Schrickel, Rollins and Associates, Inc.1161 Corporate Drive West, Suite 200 | Arlington, Texas 76006office: 817.649.3216  |  direct: 817.633.0429  | mobile: 817.797.6154  |  www.sradesign.comvCARD

Schrickel, Rollins and Associates, Inc. (www.sradesign.com) has an immediate opening for an entry level Civil Engineer / EIT in Arlington, TX.  This position will work with Civil Engineers, Planners and Landscape Architects to provide production support on a wide variety of projects including general civil design, public infrastructure, roadways, utilities, highways, site development, land development, sports facilities, and sustainable development.    Requirements:

Bachelor or Masters degree in Civil Engineering from an accredited university

Leadership, organizational and communication skills Experience with Civil 3D, AutoCad, HEC RAS software a plus New Grads will be considered Must be eager to learn and motivated to accept new

challenges

SRA is a multi-disciplinary office of Civil Engineers, Landscape Architects, and Planners located in Arlington, Texas.  Founded in 1955, the firm has become one of the leaders in the State of Texas in it’s field of expertise.  We work hard to maintain an informal, team oriented, family atmosphere, and we give new employees an opportunity to work directly with seasoned professionals and to expand their horizons of in all aspects of the profession.  SRA’s employees have a history of longevity and

Page 70: JOB SUMMARY - Texas A&M Universityceprofs.tamu.edu/llowery/CEJobs/Jobs2015.docx  · Web viewCDM Smith’s Design Centers are looking for Structural Engineers to ... 112012.docx)

70

stability.  This is an opportunity that doesn’t come along often, so take advantage of it when you have the chance.

Contact:  Larry Stone, P.E.          1161 Corporate Drive West, Suite 200          Arlington, TX 76006          (817) 649-3216          [email protected]


Recommended