INDOOR retail solutions

Flexibility & sustainability. John Lewis UK

Challenge. UK retail chain John Lewis decidedto move to energy efficient LED technology motivated by its CSR goal to reduce energy consumption in its stores by 20 percent. They required a foture proof solution with excellent quality of light.

GE solution. To meet these requirements John Lewis created their first 100% LED store, incorporating GE Lighting’s Infusion LED modules. The LEDs were installed throughout the store including the shop floor, office spaces and warehouses.

Key Benefits. Ground-breaking energy saving 10W/m2 energy used by lighting

Low maintenance

Future proof solution

Easy replacement

High lumen maintenance

John Lewis UK

GE solution provides.

Outstanding light quality

John Lewis UK

Luminaire type Indoor lighting solutions

Main characteristics New installation

Light source LED Infusion Module

CCT 3.000K

CRI 80+

Lumens 1.000lm

Service life (hours) 50.000hrs

Applied Units 60

GE InfusionTM LED Modules

Future- proof technology

Reduced maintenance & energy cost

Barry Ayling, Lighting Design Manager at John Lewis

Flexibility & sustainability.

„We opted for GE Lighting’s Infusion™ LED module because, not only did it meet all of John Lewis’

lighting criteria, it had a twist and lock capability, which I wanted to embrace. This means we can

re-lamp easily and just replace the LED engines for future energy saving and also if we need to

change the beam angle or colour temperatures to suit the product”

www.gelighting.com