Date post: | 31-Oct-2014 |
Category: |
Technology |
Upload: | i4mseu |
View: | 100 times |
Download: | 3 times |
SUMMARY
1. VERSATILITY OF DIODE LASERS
1.1. “Diode Lasers for everything”
1.2. Diode lasers in the market
2. MONOCROM DIODE LASERS
3. LASHARE PROJECT
1.1. Overview
1.2. Facts and figures
1.1. Monocrom diode laser characteristics
1.1. Monocrom clamping owned-technology
1.2. Monocrom product portfolio
1. VERSATILITY OF DIODE LASERS
� MOST EFFICIENT LIGHT SOURCES
UP TO DATE (Electro-optical
1.1. “Diode lasers for everything”
I4MS: FOSTERING DIGITAL INDUSTRIAL INNOVATION IN EUROPE
UP TO DATE (Electro-optical
efficiency up to 70%)
� Involved in almost every type
LASER SOURCE, either as direct
application, or as the optical
pumping source.
1. VERSATILITY OF DIODE LASERS
1.1. Diode lasers in the market
I4MS: FOSTERING DIGITAL INDUSTRIAL INNOVATION IN EUROPE
1. VERSATILITY OF LASER DIODES
Diode laser
I4MS: FOSTERING DIGITAL INDUSTRIAL INNOVATION IN EUROPE
2.1. MONOCROM diode laser characteristics
� Robustness � No soldering of laser bars, No
microchannels. Regular industrial-grade water
can be used
� Low maintenance � No obstruction of
cooling channels.
� High brightness � Low „smile“ (below 0.5
2. MONOCROM DIODE LASERS
I4MS: FOSTERING DIGITAL INDUSTRIAL INNOVATION IN EUROPE
� High brightness � Low „smile“ (below 0.5
microns) enchances brightness of the laser
beam.
� Flexibility and Integrability � Mechanical,
optical and electrical design combined with
instant fabrication capabilities.
� Simplicity and low-cost� On a large
production scale, our mounting technology
ensures probably the most cost-effective
fabrication process.
Clamping
cathode
isolator
wire bonding cathode
wire bonding
2.2. MONOCROM clamping owned-technology
2. MONOCROM LASER DIODES
I4MS: FOSTERING DIGITAL INDUSTRIAL INNOVATION IN EUROPE
gold-tin solder
tin solder preform
Cu anode
Cu cathode
Clamping
CuW substrate
Cu heastink
Indium solder
Cu heastink
isolator
Hard soldering Indium soldering Clamping
2.3. MONOCROM diode laser port-folio
2. MONOCROM DIODE LASERS
I4MS: FOSTERING DIGITAL INDUSTRIAL INNOVATION IN EUROPE
3. LASHARE PROJECT
3.1. Overview
LASHARE will allow this highly innovative
equipment to be demonstrated as enabler
of the laser assisted roll-forming process.
This new process will allow zero spring-back
I4MS: FOSTERING DIGITAL INDUSTRIAL INNOVATION IN EUROPE
This new process will allow zero spring-back
fabrication of complex profiles in a standard
roll-forming machine, with minimal
adaptation, thanks to the mechanism of
local yielding, which forces the material to
concentrate the plastic deformation only
under the area being hit by the laser
radiation.9
3. LASHARE PROJECT
3.2. Facts and figures
� Laser based equipment : Plug-in Diode Module for Improving Sheet Metal forming with Laser
Assisted Technology
� Partners involved
� Supplier (SUP) Monocrom (Spain)
(Jordi García Céspedes)
I4MS: FOSTERING DIGITAL INDUSTRIAL INNOVATION IN EUROPE
(Jordi García Céspedes)
� Industrial User (USR) Johnson Controls GmbH (Germany)
(Andreas Dannheisig)
� Research Institute (RTD) AIMEN (Spain)
(Pablo Romero Romero)
� LEA start date month 7
� LEA duration 14 month
� LEA budget € 321,339
THANK YOUTHANK YOUFOR YOUR ATTENTION