Joseph Kälin jo.kaelin@micronor.ch , direct: +41 44 843 40 25 , mobil: +41 79 413 70 14

For your customers:

MICRONOR

Fiber Optic ProductTo protect my

Investment

MICRONOR

202.07.2012 KJO Fiber Optic Product Part 3

The vibration is a important index showing the performance of a rotating electrical machines. They can be used for early detection of troubles. MICRONOR deliver a Sensor system for Turbo and Hydro Generators 100% in fiber optic.

Features

Application

- 100% fiber optic and Passive Solution- Detecting structural weakness and electrical disruption- Frequency range 1 to 400 Hz or up to 1000 Hz- Signal Sensitivity analog 100mV/g- operating 0° C to 100°C optional to 180°C- Measuring Range to 50g or 100g- Signal transmission over fiber max. 500m - optical feed trough and extension cable available - Standard STPC Connectors easy filed mounting kit.- Sensor in PTFE tube- Monitor box for mounting side of the generator or in the control room- very low noise and flatness over the hole range- compatible to all standard monitor systems and software - flexible installing for new and old generator- one set have 12 one axis sensor but 3 axis sensor available inclusive optical tem. sensors

- Turbo generator user- Hydro generator user- Nuclear Power station user- Wind Power station user- Generator manufacturerer

Product Part. Nr. 9600.30.101

MICRONOR

3

Features

Application

02.07.2012 KJO Fiber Optic Product Part 3

Product Part. Nr. 9600.30.101

Compatible to all Monitoring software

19 “ Rack version

MTBF > 100’000 hours

Various version of remote unit design available

single unit for one sensor version

Box for 7 vibration sensor version

Box for 2 Sensors version

MICRONOR

4

9800.66.101

MICRONOR Vibration Sensor have highest accuracy and lowest self noise.

02.07.2012 KJO Fiber Optic Product Part 3

Product Part. Nr. 9600.30.101

1, 2 and 3 axis Sensor in the same housing available

High linearity over the hole frequency range

Resonance frequency over 1,5 kHz

Weight only 20g

MICRONOR

5

9800.66.101

Product Part. Nr. 9600.30.101

MICRONOR multi channel feed through fit’s on standard hole on the Generator of Siemens, Alstom …

02.07.2012 KJO Fiber Optic Product Part 3

Special feed through high density, very customer friendly

Single connector feed through

Multi channel feed through with Single connector.

MICRONOR

6

9800.66.101

Product Part. Nr. 9600.30.101

02.07.2012 KJO Fiber Optic Product Part 3

Turbo Generator

Wind Power Generator

Hydro Generator

Nuclear Power Generator

Vibration sensor integrated direct in the Winding of the stator

The big generator

To protect y

our investm

ent

MICRONOR

7

MICRONOR your specialist for fiber optic product‘s

02.07.2012 KJO Fiber Optic Product Part 3