Date post: | 13-Apr-2017 |
Category: |
Business |
Upload: | josts-engineering-company-limited |
View: | 143 times |
Download: | 1 times |
Product
Sectional Details
Stages of Component Formation
Manufacturing Capabilities
Call : 1800 274 5661 Visit: www.josts.com
Racking Systems
PRODUCTS
Medium Duty Racking
Multi-Tier Racking
Textile Racking
Mezzanine Racking
Cantilever Racking
Light Duty Racking
Heavy Duty Racking
Drive-In-Jorack
Call : 1800 274 5661 Visit: www.josts.com
Slotted Angle Racking
Versatile storage of variety of products.
Easily installable and convenient to use.
We can provide multi tier slotted angle system with catwalks.
Available in various dimensions.
Call : 1800 274 5661 Visit: www.josts.com
Heavy & Medium Duty Racking
Racking includes palletized storage as well as shelf storage.
Major components are upright, beam, bracings, foot plate, decking panel.
Call : 1800 274 5661 Visit: www.josts.com
Cantilever Racking System
Customize solution for Rolls Storage.
Easily installable and convenient to use .
Available in various dimensions.
Call : 1800 274 5661 Visit: www.josts.com
Drive-In-Racking system
High compact storage is possible in drive-in racking where the space is limited.
Drive-in and drive-through systems can be provide by us.
Call : 1800 274 5661 Visit: www.josts.com
Mezzanine Floor Racking System
Very suitable where the space is less.
We can provide multi-tier mezzanine systems
Mezzanine systems are designed according to load per square meter on mezzanine.
Call : 1800 274 5661 Visit: www.josts.com
Medium Duty Upright
Our Medium duty upright is 6 bend roll formed section, powder coated finish, available in the range of 1.6, 2 and 2.4 mm thk.
Loading level can be Adjusted in the pitch of 85mm.
Call : 1800 274 5661 Visit: www.josts.com
Heavy Duty Upright
Our Heavy duty upright is 12 bend roll formed section, powder coated finish, available in the range of 1.6, 2 and 2.4 mm thk.
Loading level can be Adjusted in the pitch of 85mm.
100
80
Call : 1800 274 5661 Visit: www.josts.com
Heavy Duty Beam
Our Heavy duty beam is a roll formed Box section.
Beams available with the end connectors which gives the versatility of varying the heights.
Ends of the beam is provided with 3 & 4 lips and two bolts to ensure rigidity.
“X” dimension vary depends upon the load
Call : 1800 274 5661 Visit: www.josts.com
Medium Duty Beam
50
X
Our medium duty beam is a roll formed sigma section.
Beams available with the end connectors which gives the versatility of varying the heights.
Ends of the beam is provided with 3 lips and two bolts to ensure rigidity.
“X” Dimensions vary depends on the load.
Call : 1800 274 5661 Visit: www.josts.com
Standard Accessories
Bracing
Decking panel
Base Plate
Call : 1800 274 5661 Visit: www.josts.com
Brace Details
HORIZONTAL BRACE
DIAGONAL BRACE
BRACES 30 x 30 x 1.6 thk are FIXED WITH UPRIGHT FASTENERS M8 X 75
UPRIGHT
Call : 1800 274 5661 Visit: www.josts.com
Basic Components Details
1
3
5
4
6
ELEVATION DOUBLE FACE SIDEVIEW
SINGLE FACE SIDEVIEW
UPRIGHT1
2 BEAM
3
4
BASE PLATE
HORIZONTAL BRACE
DIAGONAL BRACE
5
56
7
ROW CONNECTOR
AISLE CONNECTOR
7
Call : 1800 274 5661 Visit: www.josts.com
Stages of Components Formation
Material properties verification
Punching, Roll forming, Cutting, welding
Cleaning (7 stage)Degrease, Derust, Zinc Phosphate, Passivation
Powder coating
Visual Inspection
Packing
Raw material
Call : 1800 274 5661 Visit: www.josts.com
Raw Material
Raw material for our variety of products are obtained from the leading industries like,
1. TATA steel
2. SAIL
3. ISPAT
4. ESSAR
5. JINDAL
Material Of Construction – ST42
Call : 1800 274 5661 Visit: www.josts.com
Roll Forming
1. After the verification of the material properties, sheet metal is roll formed to get the required structure.
2. Roll forming ensures no residual stresses, dimensional accuracy and precision.
1. Roll formed structures will be subjected to 7 stage cleaning process which removes oil, water and other impurities.
1. Degrease
2. Cold Water Rinse
3. De-rust
4. Cold Water Rinse
5. Zinc phosphatizing
6. Cold Water Rinse
7. Passivation
2. Then structures are powder coated which ensures non rusting at critical moisture conditions.
Powder Coating
Call : 1800 274 5661 Visit: www.josts.com
Manufacturing Capabilities
1. We can produce single continuous upright of 17.5m.
1. Galvanized – 17.5m
2. Powder coated – 12m
2. We can produce single continuous Beam of 5m.
3. We can Produce Galvanized racks.
4. Powder coating process with 7 tank cleaning
5. Then final finishing of the component is powder coated, done through automated, with electro-static spray, to attain uniform finish.
6. Upright and beam are designed with guidelines given in Indian standard IS 801:1975 code of practice for use of cold formed light gauge steel structural member in general construction.
Call : 1800 274 5661 Visit: www.josts.com
Procedure to select upright section
Upright design for given loading conditions depends on the following,
Load per level
Number of levels
Upright height or system height
Un supported length
Load per upright can be calculated from the above inputs
Beams are selected according to the load per level.
Racking isle is decided based on MHE being used.
Parameters required for designing racking system are stated in
“ENQUIRY COLLECTION FORM”
Call : 1800 274 5661 Visit: www.josts.com
Date: Enquiry Received On:
To From:
Josts Engg.Co.Ltd Mr.:
Thane.
ENQUIRY COLLECTION FORM
Jorack – HEAVY DUTY RACKING SYSTEM
Company Name -
Address -
Phone & Fax Nos -
E_Mail ID
Contact Person
Type Of Industry -
MATERIAL TO BE STORED
Palletized Non Palletized Both
For Palletized Load
Type Of Pallets-Reversible/Non-Reversible (Kindly tick mark in the attached sheet.)
Pallet Size - Fork Entry (W) x Depth (D) x Pallet Height (H)
(W) x (D) x (H)
Pallet Size With Load - Fork Entry (W) x Depth (D) x Pallet Height (H)
(W) x (D) x (H)
Type Of Load – Distributed
Carton Boxes – Size
Bags – Size
Drums – Size
Other – Size
Max Weight Of Each Pallet –
Layout Sketch -
Mark Area in which Racking is Requires
Indicate Door Size & Material Movement.
Type of flooring & Ceiling Height
Check all dimensions are given in drawing (Pillar / Column Size
Pillar to Pillar, Wall to Wall, Door Dimensions etc.)
Equipment – Existing / New
Details Of Existing Equipment – Aisle Width / Straddle Width etc.
Kindly Indicate Any Accessories Required
Column Guard Shelf Panels / Pallet Support Bar
Any Other Skid Channel / Fork Spacer / Drum Cradle
Attach
1. Drawing of Warehouse – Ask for AutoCAD Drawing .
2. Rough sketch of products with dimension.
3. Sketch of existing racks (for similar requirement)
4. List of Materials, Sizes, Weight (for multi product storage)
23
Jost’s Engineering Company Limited
• 1800 274 5661 / +91 779 888 1701
• [email protected] / [email protected]
• www.josts.com
Contact Us – 1800 274 5661
Call : 1800 274 5661 Visit: www.josts.com