48
Ultimate Machining Power High Performance Turning Center Journal 05
Ultimate Machining PowerHigh Performance Turning Center
Journal 05
Machining for Large Work-piecesHA Series
High rigidity structure with powerful cutting performance
Can easily overcome any machining tasks
Work-piece Balancing Analyzer ( WBA )Applicable to all series
Increasing e�ciency and streamlining working process
Brining the multi-tasking turning centers to the next level
G.LINC 350Applicable to all series
Combination of advanced hardware and intelligent software
Making your machine smarter
Machining for Small Work-piecesTLV Series
Fast feed rate and tool change capability
Best solution for increasing productivity
REVOLUTION
R&D Devotion Quality Persistency
Machine tools performance and technology innovation
「 G.LINC 350 New Generation Intelligent Control System 」
Bringing revolution to the machine tools industry
REVOLUTION
Operation CentersProfessional ManufacturingCore TechnologyCRM / Human ResourcesGV-1 SeriesGV-1000 SeriesGV-780 SeriesSW SeriesSD Series
Contents05 - 06
07 - 08
09 - 16
17 - 18
19 - 20
21 - 22
23 - 24
25 - 26
27 - 28
29 - 30
31 - 32
33 - 34
35 - 36
37 - 38
39 - 40
41 - 42
43 - 44
45 - 46
GTX SeriesGTS SeriesGMS SeriesHA SeriesGS-8000 SeriesGS-3000 SeriesGLS-1500 SeriesTLV SeriesThe Product Line-up
22
HONORARY PRESIDENT OF PRECISION MACHINERY DEVELOPMENT ASSOCIATION OF TAIWAN
HONORARY PRESIDENT OF TAIWAN MACHINE TOOL AND ACCESSORY BUILDER'S ASSOCIATION
HONORARY PRESIDENT OF MANUFACTURERS ASSOCIATION OF TAICHUNG INDUSTRIAL PARK
Goodway Machine Corp.EDWARD TE-HWA YANG, PRESIDENT
Goodway Machine Corp. has been specializing in the production and development
of multi-tasking turning centers for 40 years. Throughout these years, we strive to innovate
and improve our technology and products. We greatly appreciate all the support and effort
from our dealers located around the world. Most importantly, we would like to thank our
customers for the constant feedback; for without your suggestions, we would not be where
we are today. We are constantly seeking to improve our technology every year, each and
every day to better serve our customers.
Currently, we are improving and developing new technologies for each series. We
have several series available for the Turning Center. First is the Multi-Axis Turning Centers
which includes: 5-axis, Swiss-Type, Twin-Spindle & Twin Turrets Turning Centers. We are also
famous for developing large turning centers and are currently working on: Vertical Turning
Center with turning table that are 2 m ~ 5 m, Horizontal Turning Center with 320 mm in Y-Axis,
and Flat-Bed Turning Center with 2 m turning diameter and 10m turning length.
We are proud to announce the continuous improvement of the NC intelligence
systems which include the self-developed G.NET system, 3D Simulation and Collision
Avoidance System, Load Monitor System, and Monitoring and Maintenance Program. We
strive to improve our development in specialized machines that include: Automatic Balance
Function, Grinding function, Custom Screen on Control, and crankshaft turning function.
We also want to advance our technology in Automation by innovating our: Built-in Robot
Arm, Loading/Unloading system, Gantry Loading system, and Bar Feeder.
Our ultimate goal is to provide high quality and high capability machine tools to the
industry. This allows our customers to produce high end products in order to compete
in this aggressive market. We have the ambition and courage to move forward and are
confident to see our growth in the future.
Strive to Innovate
44
Consistent Global Distribution Quality Customer Service
CTSP Branch Manufacturing and sales of turning CTSP Branch centers / 26,600 m2
Taichung Headquarters Processing and assembly of key components / 18,600 m2
Over 20% of the entire staff is composed of our R&D team 70% of the R&D members either have a domestic or a foreign Mechanical Engineering master's degree
Research and Development Center
With over 38 years of machine tools manufacturing experience, Goodway has gradually
expanded its network throughout the world with companies in, Central Taiwan, United
States, and mainland China. Furthermore, the new factory in southern Taiwan will be in
operation this year, which will add new energy to our group.
Operation Centers
India
EgyptItaly
Spain
Portugal
United KindomNetherland
Germany
France
Slovenia
Croatia
IsraelTurkey
RomaniaUkraine
Bulgaria
Pakistan
RussiaFinland
Denmark
Sweden
Poland
SwizerlandCzech Republic
Australia
SingaporeMalaysia
Tailand
JapanYAMA SEIKI USA, INC.
New Zealand
Canada
South Africa
Brazil
Argentina
Indonesia
Suzhou Branch
Dongguan Branch
Wujiang Branch
Suzhou BranchYAMA SEIKI USA, INC.
Wujiang Branch Dongguan Branch
Market Distribution
America
15 %Europe
30 %Asia
40 %Taiwan
10 %O ther
5 %
World Wide Sales & Service Network
Sales of turning centers / 20,000 m2
Manufacturing and sales of turning centers and machining centers / 66,800 m2
Sales of turning centers / 500 m2
Manufacturing and sales of turning center / 13,600 m2
66
Spindle test runs are fully monitored
Using NSK GN gauges for the double-row, cylindrical roller, and spindle bearings helps promote the accuracy in the assembly
G1 class spindle dynamic balancing test ( ISO 1940 )
Key components such as spindle bearing, gears, and curvic couplings are imported from major companies throughout the world.
Professional ManufacturingAll production procedures are strictly controlled in-house to ensure consistent quality
Casting machining We use MITSUI SEIKI & TOSHIBA horizontal machiningcenter to our parts
Critical Parts Inspection ZEISS 3D measuring
Casting agingTop grade casting components are aged for 3~6 months to ensure maximum structural stability.
Critical Parts InspectionTAYLOR HOBSON roundness instruments
Air conditioned production line – CTSP branch
88
Features
New Generation Intelligent Control System
LED light is installed in the control panel
for easy operation in dim environments
1
19 inch full color TFT LCD2
NC Function Key3
Fast-key area4
AUX-key area5
CF card / USB port6
QWERTY Keyboard7
Mouse pad8
LED light display9
36 soft-key for convenient operation1
2
3 4 5
6 78
9
Advanced hardware
The G.LINC 350 uses reliable and high performance industrial computers to provide stable operation under harsh conditions.
Outstanding Operability
The large high resolution monitor, keyboard and touch pad provides easy operating access.
Streamlined Programming
The streamlined programming function greatly saves programming time.
High Security and Shortened Machining Setting
The 3D simulation and collision avoidance system r e d u c e s m a c h i n e d a m a g e o p p o r t u n i t y w h i l e increasing machining setting efficiency.
Reliable Continuous Operation
The load monitor system increases the machine reliability for continuous operation.
Shortened Troubleshooting Time
The maintenance and motoring program provides up-to-date machine data for easy maintenance and troubleshooting enabling the machine to always perform at its best condition.
Improved Utilization Rate
T h e u t i l i z a t i o n r a t e a n a l y s i s p r o v i d e s u s e f u l reference for machine usage improvement.
Core Technology NC Intelligence
Brand New Inspection Strategy for Safer and More E�cient Working ExperienceFSI Inspection
Simulation Inspection
Create Simulation
Interference Inspection
1
2
3
1
2
3
Tool database creates tool selection
The feeding will stop when i n t e r f e r e n c e h a p p e n s between the turret and tailstock
General Production Process Setting
Setting
Test-Run
Test-Run
Actual Production
Actual ProductionUtilization Rate 30 %
Using 3D Simulation Inspection
The 3D simulation inspection can greatly reduce test-run time and improve overall utilization rate
The 2D parameter definite t h e c o o r d i n a t i o n a n d creates chuck selection
Inspecting interference between the tool and chuck
Inspecting interference during turret indexing
The 2D parameter definite the spindle and creates 3D material selection
After finishing the setting, then start the coordination positioning and turning simulation
Inspecting interference between the tool and material during spindle stop
I.D. Tool
Chuck
Material
NC Intelligence
1010
Free Android APP
3D Check Tool Management Senesor Status Load Monitor
Alarm DetailTool Build Productive Management Position Screen
ALM Message / Command /
Request / Information
High Intelligent Machine Control
Monitoring machine condition in real timeMT-Line Messages
Core Technology NC Intelligence
GS-6000M
GS-6000M
O001(GLS2000LYS);G291;N1(O.D ROUGH);G54 ;G28U0.;G0 Z200.;T0101;G50S2500;G96 S250 M3;G99G0Z5.;X38.;G1 Z0. F0.3;X-2.;G0 X35. Z5.;G71 U2. R0.5;G71 P111Q112U0.3W0.1F0.3;N111 G0 X25.;G1Z0.;X27.Z-1.;G1Z-22.;X33.Z-26.6;Z-52.;N112X38.;G70P111Q112F0.12; G28U0.M9;G0Z200.;M1;N2(THREAD);G28U0.Z200.;T0202;
Real-time Monitoring CenterThe system integrates information from all machines including
operating status, machine ID, work-piece count, operator ID, and
accumulated cycle time. The machines are marked with different
colors for easy identification.
Data Statistics and AnalysisThe data and mileage captured by the system are automatically
saved into the database. It can provide easy access for the operator
to browse any machine information.
Program TransmissionThe machining program can be transmitted between the control
and machine. It can also be transmitted between the servo and
machine by using the control interface.
Machine 3D display and operating simulation are
synchronized with the actual machine
Providing functions including fast program inspection,
machining simulation and machine interference inspection
Shortens test-run time and increases production efficiency
User friendly interface
Reduces operator's burden
Reduces machine malfunction opportunity and
maintenance cost
Optimizes machining area
Economical simulation solution
Expandable modules
Material cutting simulation
Data acquisition
To do real
machining Quickly
Machining simulation、Program verification、and interference check CAM
Verified NC program Unconfirmed program
Manual EditMachine information
Wi-Fi Data server Mobile device
G.Net Ⅱ
SVI Suite
NC Intelligence
1212
High efficiency, High precision, Suitable for short / thin workpieces
We use a vertical turning center with WBA installed as an example. After the disk brake is finished, it will be inspected online. Then
the C-axis will eliminate the unbalanced volume. The machine do not need to be stopped from start to finish, which saves loading
and unloading time and also prevents accuracy error from the process.
On-line Vibration Inspection The sensor installed inside the machine can pick up the vibration during machining operation
Real time Work-piece Balancing Analyzer
Provides information for designing the mold counterweight
The unbalanced volume can be eliminated automatically
Move to Move toPrepareworkpiece
Prepare workpiece
Prepareworkpiece
PrepareworkpieceTurning process
Machining process
Milling processDetecting process
Balancing analyzer Eliminating unbalanced amountDual facing
Dual facing+
Workpiece balancing analyzer+
Eliminating unbalanced amount
Work-piece Balancing Analyzer ( WBA )
Normal
WBA
Cycle time 50%
Core Technology
3
6
9
12
Combine Multiple Machines Into One
Goodway has proudly brought turning centers into a new generation. We have successfully
developed a series of live tooling turret, Y-axis, sub-spindle and B-axis to combine with
our vertical, horizontal and Swiss type machines, turning them into multi-tasking turning
centers. From a work-piece to a finished product, it can be done in one single setting.
ManpowerTimeReduces procurement cost
Work-piece Balancing Analyzer Multi-tasking Turning Capabilities
Live Tooling Turret with C-axis
Sup-spindle
Y-axis
Simultaneous 5-axis Turning Capability
W i t h t h e Y- a x i s , c o m p l e x t u r n i n g
applications including high precision
grooving and radial offset drilling can
be done easily with high accuracy and
efficiency.
Turning and milling, drilling, tapping,
hobbing, grinding, slant and complex
surface machining can be easily done
in one single machine.
By combining disk brake system with
live tooling turret and C-axis, drilling,
m i l l i n g a n d t a p p i n g a p p l i c a t i o n s
including cylinder and contour turning
can be done easily.
The sub -spindle can s imultaneously
a c c e p t a w o r k- p i e c e f r o m t h e m a i n
spindle to work on the back of the work
piece ( 2nd operation ). It not only saves
transporting and setting time but also
reduces accuracy error.
1414
Automatic live center with position sensor provides fast and accurate positioning Unloading system with large parts catcher
The parts catcher can be customized for easy loading and unloading
Infrared automatic door increases safety during operations
The control panel can be customized providing consistency in the production line
With our well experienced customization capability, our engineer team can provide support for developing molds and accessories based on different machining requirements for each industry, which allows the machines to be fully applicable.
Project Examples
Loading andunloading Time
GeneralMachines
SpecializedMachine
10 sec.
4 ~ 5 sec.
50% 50% Manpower cost
We provide strong R&D capability to fulfill customers' actual needs
Modular gauge design makes f a s t a n d p r e c i s i o n m a s s production possible
Core TechnologyCustomization and Application Capabilities
Automation
Articulated robot
Gantry Loading System ( FMS )
Loading / Unloading System
Gantry Loading System ( Stand-alone )
High In Production Efficiency Low in Man Power
1616
Mobile feedback
E-mail feedback
Examining the case
Q&A
E-mail reply
Examining the satisfaction
Return visit list
Automatically inform service staff for overdue e-mail
Customer Service staff
Login e-service
Services case management
Customer Relationship Management System
Service
ServiceProfessional, swift, responsible
Basic trouble-shooting on-line
Sufficient spare parts
Professional technicians
High efficient service
Maintenance staff should check-in when arrive customer's factory immediately, then upload some photos about maintenance process onto our database to guarantee the quality and efficiency.
CRM system is implemented to improve our customers' satisfaction. With CRM complete solution and Cloud database, we can provide integrated sales activity from inquiry to after-sales service.
APPCRM Characteristic
Based on the type of maintenance problems, automatically notify the commissioner to provide more professional service.
Complete machine maintenance history, accurate understanding of the machine status.
Comprehensive technical service database to provide faster and reliable solutions.
Instantly upload a survey about client's satisfaction to enhance service quality.
Service support framework
To increase more talented human resource in machine to industry, Goodway & National Chung-Hsing
University started a CNC machine tool technology competition project. This project was participated by all
universities in Taiwan with very fruitful results.
After the competition President Yang instructed to continue same program in the future for bigger scale.
With goals aiming for more professional machine tool industry talents would be generated.
Human resources development「精密工具機技術」專題實作獎
"Precision machining center technology" thematic award
Under GraduateGraduate School
1st
Place
high accuracy micro CNC M/C and 3D measurement development.
National ChangHua University of Education / Electric Engineering Dept.
Research combining of Image-capturing & micro machining on micro shift movement
National ChangHua University of Education / Electric Engineering Dept.
Intellectual micro machine tool and optical glass micron structure machining
National Taiwan Normal University / Electric Engineering Dept.
Development for Non-contact energy transportation super sonic vibration aid taper
National Chung-Hsing University / Mechanical Engineering Dept.
Precision aerostatic rotary tableNational ChangHua University of Education / Electric Engineering Dept.
Development for Advanced 5 axes machining center controller
National Chung-Cheng University / Mechanical Engineering Dept.
3th
Place
3th
Place
3th
Place
2nd
Place
1st
Place
1818
GV-1Ver tical Turning Centers
High torque gear type tooling spindle / work- piece spindle.
Meehanite large scale column and bed structure.
Thermally balanced and precision grinded high-rigidity box way design.
Bridge type structure with W-axis travel of 800 mm.
Reliable 16-tool carousel type tool magazine.
Heavy duty working table of maximum load up to 8,000 kg.
Optional precision grinded accessories which can provide extra turning, milling and grinding capabilities.
Heavy Duty Vertical Turning Center
2020
Vertical Turning Centers
Spindle System for Heavy Weight Work Pieces
Models GV-1200 GV-1600Table diameter Ø 1,250 mm Ø 1,600 mm
Max. swing diameter Ø 1,600 mm Ø 2,000 mm
Max. turning diameter Ø 1,350 mm Ø 1,800 mm
Max. turning length 1,300 mm
Max. table load 5,000 Kg 8,000 Kg
Work-piece spindle output 37 / 45 kW ( Cont. / 30 min. )
Work-piece spindle speed range 25 ~ 350 rpm 18 ~ 250 rpm
Live tooling spindle output 7.5 / 11 kW ( Cont. / 30 min. )
X / Z axes travel 935 / 900 mm 1,165 / 900 mm
W-axis travel 800 mm
BT50 2-speed gear type spindle provides 361 N-m of
torque to fulfill heavy cutting needs.
Big diameter NN TYPE high-precision roller bearings
provide high-rigidity and low-wear advantages.
T h e 1 6 T / 2 4 T c a r o u s e l t o o l m a g a z i n e p r o v i d e s
reliable tool change and less damage to the spindle.
The optional milling spindle allows the GV-1 series to
become a multi-tasking vertical turning center, which
can provide high efficiency machining capabilities.
The high rigidity, high rotation accuracy cross roller
bearing can sustain radial, axial and torque compound
loads to ensure machining accuracy under long-term
heavy work loads and extend the service life of the spindle.
With the FANUC servo motor and high deceleration
ratio 2-speed gear box generating up to 23,900 N-m of
torque ( GV-1600 ), all heavy cutting requirements can
be easily fulfilled.
E x t r e m e l y r i g i d c r o s s r a i l i s d e s i g n e d w i t h b o x - s h a p e d
s t r u c t u r e t o p r e v e n t t h e r m a l d i s p l a c e m e n t a n d a s s u r e
machining stability.
The column is designed with a high-low box way to firmly
support the crossrail while minimizing structural distortion
and increasing rigidity.
The closed type square ram on the tooling spindle
is fixed with 4 sets of powerful wedges which gives
the GV-1 series with greater structural rigidity and
machining accuracy compared to peer models with a
semi-closed type square ram structure.
Semi-closed Type Square Ram Closed Type Square Ram
Tooling Spindle Work-Piece Spindle
Specifications are subject to change without notice.
GV-1000Ver tical Turning Centers
High torque gear type spindle.
Standard 12-tool turret or live tooling turret.
Meehanite large scale column and bed structure.
X / Z axes are adopted with compound linear guide ways.
Compact structure design.
High Rigidity Vertical Turning Center
2222
Vertical Turning Centers
L a r g e s c a l e b e d w i t h o n e - p i e c e c o l u m n p r o v i d e s
abundant structural rigidity
The Z-axis braking system is equipped with Japan
m a d e e l e c t r o m a g n e t i c b r a k i n g d e v i c e a n d i s
separated with the servo motor to ensure braking
performance and operator's safety.
The box way mixed with roller type linear guide ways
provide both high speed and high rigidity advantages.
All series are equipped with FANUCαi servo motors and
αPi spindle motors providing ultimate performance
and precision.
Models GV-1000Max. swing diameter Ø 1,020 mm
Max. turning diameter Ø 1,000 mm
Max. turning length 760 mm
Chuck sizeØ 15" ~ 24" ( Opt. : Bearing diameter Ø 160 mm ) Ø 21" ~ 32" ( Opt. : Bearing diameter Ø 200 mm )
Spindle bearing diameter Ø 160 mm ( Opt. Ø 200 mm )
Spindle nose A2-11 ( Opt. A2-15 )
Spindle motor output 22 / 30 kW ( Cont. / 30 min. )
X / Z axes travel 525 / 765 mm
X / Z axes rapids 24 / 20 m/min.
Live Tooling Turret Gear Type Spindle
GV-1000 GV-1000 GV-1000
2,975 mm
2,595 mm
2,930 mm
4,490 mm
Compact size machine structure takes 60% less floor space than peer machines.
Ø 320 mm diameter Japan made super high precision curvic
couplings accurately position the Ø 600 mm turret disk
ensures abundant turret rigidity for all cutting conditions.
Working with the optional live tooling turret and C-axis
enables the machine to perform multiple tasks. The live
tooling turret is equipped with 12 ER50 live toolings, which
only the tooling at work spins while the others are paused.
With the 30 kW high horse power spindle motor and
high deceleration ratio 2-speed gear box generating up
to 3,135 N-m of torque, all heavy cutting requirements
can be easily fulfilled.
Specifications are subject to change without notice.
High Rigidity, High Performance Key Components
GV-500GV-780Ver tical Turning Centers
Modular spindle design.
8 - to o l s e r vo i n d e x i n g t u r re t o r 1 2 - to o l l i ve tooling turret.
High speed linear guide way design.
Compact structure with less floor space usage.
Diverse packages to choose from.
High Speed Vertical Turning Center
2424
Vertical Turning Centers
Models GV-780 GV-500Max. swing diameter Ø 850 mm Ø 650 mm
Max. turning diameter Ø 820 mm Ø 620 mm
Max. turning length 660 mm 520 mm
Chuck size Ø 15"/ 18" ( Opt. ) Ø 12"/ 15" ( Opt. )
Spindle bearing diameter Ø 160 mm Ø 130 mm
Spindle nose A2-11 A2-8
Spindle motor output ( Cont. / 30 min. ) H : 18.5 / 22 kW ; L : 13 / 22 kW H : 15 / 18.5 kW ; L : 11 / 18.5 kW
X / Z axes travel 500 / 670 mm 350 / 550 mm
X / Z axes rapids 20 m/min. 20 m/min.
The GV-500 i s equipped
with standard 8-tool servo
i n d e x i n g t u r r e t . I t c a n
a l s o b e e q u i p p e d w i t h
optional 12-tool live tooling
turret, which can achieve
0 . 2 s e c o n d i n d e x i n g f o r
adjacent stations and 0.5
second for stations at the
opposite end of the disk.
The Goodway dual-face turning
holder al lows both s ides of a
work piece to be machined at
the same time while ensuring
parallel precision of the surface,
which makes the cutting time 50%
shorter compared to regular tools.
It is applicable for disk brakes or
automotive related components.
Work-piece Balancing Analyzer
Twin Spindles & Twin Turrets Series
Dual-Face Turning Holder Live Tooling Turret
The twin spindles & twin turrets series can also be equipped with optional load &
unloading systems and work-piece �ipping device. From bar feeding, machining, �ipping,
machining and discharging, can be completed in one process. It not only saves manual
�ipping time but also reduces positioning error and increases production e�ciency.
The twin spindles & twin turrets series uses a single
NC control to monitor the twin systems, which
reduces operating time ( when working on two
machines ) and also increases production e�ciency.
The GV-500 series can be equipped with optional twin spindles & twin turrets system to
provide maximum output e�ciency.
The WBA can accurately detect the vibration caused
by the centrifugal force under high speed rotation
f r o m t h e w o r k - p i e c e . I t c a n b e a p p l i e d t o " N o n -
concentric asymmetry work pieces" and work pieces
that needed to be evaluated after machining. The
unbalanced volume can be el iminated by the l ive
tooling turret during the finishing process.
Specifications are subject to change without notice.
Multifunction, High Efficiency Machining Method
SWSwiss Turning Centers
4 axes simultaneous machining, up to 9 axes control.
Main & sub-spindle simultaneous machining on both ends and can equip with bar feeder.
T h e S W- 3 2 / S W- 4 2 s p i n d l e u s e s ro t a r y hyd r a u l i c cylinder which can firmly clamp the work-piece. The rotary hydraulic cylinder provides fast response and flexible clamping force advantages.
Compact structure with less floor space usage.
Diverse packages to choose from.
Multi-tasking SWISS Turning Center
2626
Models SW-20 SW-32 SW-42
Working range
Max. machining diameter Ø 20 mm Ø 32 mm Ø 42 mm
Max. chuck movementBush 207 mm 315 mm
110 mm ( Bushless )Bushless 120 mm 315 mm
Backwork processing length 80 mm 130 mm 110 mm
Max. speedSpindle 10,000 rpm 7,000 rpm 6,000 rpm
Sub-spindle 8,000 rpm 7,000 rpm 6,000 rpm
O.D. toolsNumber of tools 6 6 5 / 6 ( Opt. )Dimension □ 12 mm □ 16 mm □ 20 mm
Number of I.D. tools 4 4 5
Side live toolNumber of tools 5 ~ 10 5 ~ 10 4 ~ 6Cross tool speed 8,000 rpm 6,000 rpm 6,000 rpm
Back working
tooling
Number of tools 4Back tool speed 8,000 rpm 5,000 rpm 5,000 rpm
Axes rapids 30 m/ min.
Swiss Turning Centers
High speed hard whirling milling Main & sub-spindle simultaneous drilling and tapping
Side milling & tapping
Front offset drilling and tapping Rear offset drilling and tapping Main & sub-spindle simultaneous milling
U-drill Device
T h e s u b - s p i n d l e c a n b e e q u i p p e d w i t h 2 U - d r i l l d e v i c e s , w h i c h i n c r e a s e s t h e t o o l capacity and makes machining application more flexible. ( Only applied to SW-32 )
50 mm185 mm
The bushless design is suitable for machining cold forge bar and the remaining bar length can be less than 50 mm which saves material costs.
Take SW-32 as an example
Bush type spindle configuration Bushless type spindle configuration
Remaining bar length Remaining bar length
Spindle Construction
The SW-32 spindle can be equipped with bush or bushless type structure depending on different machining conditions.
Specifications are subject to change without notice.
Machining Variations
Tool System
超值型走心式車銑複合機
SDSwiss Turning Centers
4 axes simultaneous machining, up to 8 axes control.
10,000 rpm high speed spindle.
Compact machine size takes less floor space.
Compact SWISS Turning Center
2828
The SD series provides with high efficiency, easy operation and less floor space usage advantages and features such as
abundant tool capacity, live tooling and C-axis functions to provide the best machining combination.
X and ZB axes, the guide ways is dovetail box way that made under heat treatment and super high precision grinding. And
the slide ways are bonded with Turcite B to eliminate stick-slip, minimize wear and maintain long term accuracy.
Swiss Turning Centers
Models SD-16 SD-20
Working range
Max. machining diameter Ø 16 mm Ø 20 mm
Max. chuck movement 175 mm 175 mm
Backwork processing length 80 mm 80 mm
Max. speedSpindle 10,000 rpm 10,000 rpm
Sub-spindle 8,000 rpm 8,000 rpm
O.D. toolsNumber of tools 6 5 ( Opt. ) 6Dimension □ 12 mm □ 10 mm □ 12 mm
Number of I.D. tools 4 4
Side live toolNumber of tools 2 4 ( Opt. ) 4Cross tool speed 8,000 rpm 6,000 rpm
Back working tooling Number of tools 4 4
Axes rapids 30 m/ min. 30 m/ min.
Tool System Chart
Machining Modes
Z-axis
X-axis
Z-axis
X-axis
Side drilling
and milling
Main & sub-spindle
simultaneous drilling
and tapping
Tool Post
O.D. tool
*1 O.D. tool □ 12 mm ，Live Tool ER11
*2 O.D. tool □ 10 mm ，Live Tool ER11 ( x2 ) + ER16 ( x2 )
I.D. tool Side live tool Back working tool
SD-20
6
4
4 ( Max. )
4
SD-16
6*1 5*2
4
4 ( Max. )
2*1 4*2
SD-20
4
SD-16
4
O.D Tool
Front-end working Tool
Rear-end working Tool
Radial live tool
Rear-end working tool
Standard Tooling System
Rear-end tooling system
Specifications are subject to change without notice.
High Speed, High Reliable Tool System
GTXMulti-axis Turning Centers
F lexible Machining Combinations
Brand new multiple axes multi-tasking structure enables the work-piece to be done in one setting.
U p p e r a n d l o w e r t u r r e t c a n b e adjusted based on different machining requirements.
All series are of high rigidity roller linear guide ways.
W i t h t h e o p t i o n a l b a r f e e d e r a n d automatic unloading device, manpower can be greatly reduced.
Multi-taking Turning Center
3030
Multi-axis Turning Centers
Models GTX-2000 GTX-2600Max. swing diameter Ø 270 mm
Max. turning diameter Ø 240 mm
Max. turning length 436 mm 436 / 419 mm
Chuck size Ø 8" Ø 8" ( Big-bore) / 10"
Spindle motor output ( Cont. / 30 min. ) 11 / 15 kW
Turret / Live tooling turret station 12 + 12 ( Opt. 16 + 16 )
X1 / X2 / Z1 / Z2 / Y axes travel 185 / 210 / 470 / 470 / ± 50 mm
X / Z axes rapids 24 m/min.
Y-axis rapids 10 m/min.
Highly efficient and flexible machining combinations
Upper turret working on left spindle
Lower turret working on right spindle
Both turrets can work on the workpiece simultaneously
Upper turret working on right spindle
Lower turret working on left spindle
Upper / Lower Turret Structure
With the optional 16-station turrets, maximum tool station capacity is up to 32 tools, which can easi ly fulfill various machining requirements.
The production capacity of the GTX series is 1.5 times
larger than average models.
Specifications are subject to change without notice.
Mass Production
GTX-2000
H i g h Q u a l i t y H i g h Productivity
Standard Model
Mu
lti-tasking
Mach
inin
g
GTSMuti-axis Turning Centers
The multi-axis & multi-tasking structure enables the whole machining process to be completed in one setup.
Simultaneous turning on both spindles. The second spindle can be used to support extra long work-pieces, thus increasing machining accuracy.
T h e h i g h r i g i d i t y s l a n t b e d d e s i g n e n s u r e s structural rigidity.
The optional Y-axis can per form multi-tak ing machining for complex work-pieces.
G TS - 1 5 0 i s d e s i gn e d w i t h h i g h s p e e d l i n e a r guide way. GTS-200 is designed with high rigidity box way.
Twin spindles & Twin Turrets Turning Center
3232
High Efficiency Machining Strategy for Complex Work-Pieces
Models GTS-150 GTS-150XY GTS-200 GTS-200XYMax. turning diameter Ø 180 mm Ø 280 mm
Max. turning length 180 ~ ∞ mm 200 ~ ∞ mm
Chuck size Ø 6" Ø 8" / 10"
Bar capacity Ø 42 mm Ø 51 / Ø 65 mm
Spindle nose A2-5 A2-6 / A2-8
Spindle motor output ( Cont. / 30 min. ) 5.5 / 7.5 kW 11 / 15 kW
X1 / X2 axes travel 155 mm 160 mm 190 mm 220 mm
Z1 / Z2 axes travel 180 / 500 mm 210 / 600 mm 270 / 740 mm
Y-axis travel — ± 30 mm — ± 60 mm
X1X2 / Y1Y2 / Z1Z2 axes rapids 15 / – / 36 m/min. 15 / 10 / 36 m/min. 20 / – / 24 m/min. 20 / 20 / 24 m/min.
Multi-axis Turning Centers
X2-axisX1-axis
Z1-axis
C1 軸
Y1-axis
Z2-axisC2 軸
Y2-axis
Both spindles can perform simultaneous turning to work on extra long work pieces, which can prevent machining error caused by the rotating de�eciton.
Th e Y- a x i s s t r u c t u re i s o f o r t h o g o n a l d e s i g n t o e n s u re m a x i m u m a c c u r a c y when working on complex work-pieces.
B o t h s p i n d l e s c a n o p e r a t e separately, which can replace two t u r n i n g ce nte r s w h i l e i n c re a s i n g automation capabilities, thus saving more floor space.
High Performance Machining Capability Twin Y-axis Structure
H1 Drilling H2 Workpiece Support
TURRET#1
TURRET#1
TURRET#2
TURRET#2
H2H1
H1 Turn Operation H2 Turn / Drill Operation
C-axis
H2H1C-axis
Specifications are subject to change without notice.
The high rigidity 45˚ slant bed design provides smooth chip disposal and easier operator access.
Both spindles are of the same bar capacity and are driven by wide -range FANUC αP i motor. I t p r o v i d e s f u l l p o w e r w i t h s t a b l e o u t p u t within the speed range of the spindle. The fast acceleration/ deceleration cutting capability can greatly reduce the cycle time.
The combination of twin spindles, t w i n t u r r e t s a n d t w i n Y- a x i s c a n reach up to 8-axis control.
GMSMulti-axis Turning Centers
9-axis control with 5-axis simultaneous turning.
Diverse machining programs enables maximum accuracy and efficiency.
Designed with high speed high precision built-in spindle ( 1st & 2nd spindle obtains the same specification ).
Compound guide way bed structure ensures both high rigidity and fast movement advantages.
Tool Spindle Type Multi-taking Turning Center
3434
High Speed High Performance 5-axis Simultaneous Machining
Multi-axis Turning Centers
Models GMS-2000ST GMS-2600STMax. swing diameter Ø 900 mm
Max. turning diameter Tool spindle：Ø 550 ( KM63 ) ；Turret：Ø 340 mm
Max. turning lengthTool spindle：1,100 mm ( 8" ) ‚ 1,094 mm ( 10" ) Turret：1,053 mm ( 8" ) ‚ 1,043 mm ( 10" )
Chuck size Ø 8" Ø 10"
Bar capacity Ø 51 mm Ø 65 mm
Hole through spindle Ø 61 mm Ø 76 mm
Spindle motor output ( cont. / 30 min. ) H : 22 / 25 ; L : 11 / 15 kW
B-axis rapids 30 rpm
Machining capacity Face mill：Ø 80 mm , End mill：Ø 20 mm , Drill：Ø 37 mm , Tap：M27
Tool spindle taper / Shank of Tool Tool spindle : KM63 ; Turret : □ 25 / Ø 40 mm
Magazine capacity / Turret station 24 ( 40 Opt. ) / 15
Tool Spindle Live Tooling Turret 9-axis Control
Tool Spindle
Second Spindle
Live tooling spidle
Arm type ATC
First Spindle
Z2-axis
Zs-axis
X2-axis
X1-axis
Z1-axis
C1-axis
Y1-axis
C2-axis
B-axis
Specifications are subject to change without notice.
Tool spindle uses tr iple plate cur vic c o u p l i n g w i t h w o r m g e a r d r i v e structure. Swivel ing range : ± 120˚, Indexing resolution : 0.001°
1 5 - s t a t i o n l i v e t o o l i n g t u r r e t equipped with Ø 250 mm diameter high precision curvic couplings
T h e s u p e r h i g h p e r fo r m a n c e 9 - a x i s co nt ro l l i n g m e c h a n i s m i s e q u i p p e d w i t h FA N U C 3 1 i A 5 c o n t r o l w h i c h c r e a t e s 5 - a x i s s i m u l t a n e o u s m u l t i -tasking turning capability.
T h e 3 D s i m u l a t i o n p r o g r a m provides real time environment s i m u l a t i o n w h i c h m a i n t a i n s operation safety while saving run-in testing costs.
3D Simulation
Double low center of gravity slant bed design provides 30% rigidity than average slant beds.
HAHorizontal Turning Centers
Super large working range is applicable for large tube type or spindle t y p e w o r k p i e c e s . D i v e r s e m a c h i n i n g p r o g r a m s e n a b l e s m a x i m u m accuracy and efficiency.
The optional live tooling turret, four-way toolpost, boring tooling and steady rest fulfills various machining requirements.
Twin chip conveyor system with separated large coolant tank provides smooth chip disposal and excel lent coolant effect.
Flat-bed Turning Center
3636
Horizontal Turning Centers
Models HA-1400 HA-1600 HA-2000Max. swing diameter Ø 1,400 mm Ø 1,600 mm Ø 2,000 mm
Max. turning diameter Ø 1,100 mm Ø 1,300 mm Ø 1,700 mm
Max. turning length 2,000 / 3,000 / 4,000 / 5,000*1 mm
Max. table load 10,000 ~ 12,000 kg ( Need to be supported by steady rest )
Flat bed width 1,350 mm
Spindle motor output ( cont. / 30 min. ) 37 / 45 kW
Turret / Live tooling turret station 8 / 12 ( Opt. )
X-axis travel 595 mm 695 mm 895 mm
Z-axis travel 2,150 / 3,150 / 4,150 / 5,150 mm
Tailstock base travel 2,150 / 3,150 / 4,150 / 5,150 mm
*1 Please contact Goodway Sales Dept. for larger size requirements
Excellent machining strategy for super large workpieces
Heavy-duty steady rest
Flat-bed with 4 box way designStrong structural design for heavy duty cutting
Live Tooling Turret & C-axis
The structure of the steady rest is designed based on the actual
working requirement. When the workpiece diameter is not more
than Ø 600 mm, the saddle and steady rest will not interfere
each other, thus the machine does not need to be stopped for
removing the steady rest.
Working with the optional live tooling turret, the
Cf-axis and disk brake system enables the machine
to perform multiple tasks, such as drilling, milling,
and tapping operations which greatly increases
machining efficiency.( Manual ) Ø500 ~ 800 mm ( Manual ) Ø800 ~1,000 mm
( Hydraulic ) Ø125 ~ 460 mm ( Manual ) Ø300 ~ 600 mm
One-piece flat-bed with 4 box way casting is designed
with a large span structure to provide maximum strength
and accuracy.
The saddle and tailstock travel are separated, which
allows the tailstock to support the workpiece without
crossing the saddle to ensure structural rigidity.
T h e H A s e r i e s i s s t a n d a r d w i t h
12-station servo indexing turret .
T h e o p t i o n a l f o u r - w a y t o o l p o s t
can be used for heavy cutting and
the boring tooling can be used for
specific machining conditions.
3 - s t e p g e a r s p i n d l e
provides 8,320 N-m torque
under 52 rpm speed.
Specifications are subject to change without notice.
GS-8000Horizontal Turning Centers
Ø 320 mm hole through spindle and turret is suitable for all sorts of large size work-pieces.
320 mm super long Y-axis travel to fulfill machining conditions for complex work-pieces.
The steady rest and high rigidity tailstock can ensure machining accuracy for long work-pieces.
High torque 3-step gear t ype spindle provides powerful cutting capability.
Heavy duty Turning Centers
3838
Horizontal Turning Centers
Models GS-8000Max. swing diameter Ø 1,030 mm
Max. turning diameter Ø 810 mm
Max. turning length 1,150 / 2,150 / 3,150 mm
Chuck size Ø 21" ~ 32"
Hole through spindle Ø 205 / 260 / 320 mm
Spindle nose A2-15 / A2-15 / A2-20
Spindle motor output 30 / 45 kW ( cont. / 30 min. )
X / Y axes travel 525 / 320 mm
Z-axis travel 1,200 / 2,200 mm
X / Z / Y axes rapids 16 / 12 / 16 m/min.
By using the Y-axis with l ive tooling turret and C-axis, it can greatly
increase machining capability for complex work pieces while increasing
multi-process machining accuracy.
Super long Y-axis travel can easily fulfill machining conditions for large
size work pieces such as aerospace, shipbuilding and energy industries.
B y u s i n g F i n i t e E l e m e n t M e t h o d s ( F E M ) , o p t i m a l r e i n f o r c e
ribbings are directly cast into the one-piece bed structure which
greatly increases structural rigidity.
The modern slant wedge box way
bed design provides great support
for the large size X-axis saddle with
smooth chip disposal.
T h e 3 - s t e p g e a r t y p e s p i n d l e
provides up to 7,330 N-m of torque.
Super Long Y-axis Travel
Grooving with Y-axis can result in
higher accuracy
Rough Grooving
Fine Grooving
The 30°angle of X and Y axis al lows the center of gravity of the
t u r r e t t o r e m a i n i n t h e s a d d l e g u i d e w a y t o e n s u r e m a c h i n i n g
accuracy and decrease distortion.
Grooving with Y-axis
320 ( ±160 ) mm Y-axis travel
Max. Ø320mm
Ø 320 mm hole through spindle
Specifications are subject to change without notice.
Ø800mm
GS-3000GS-2000臥式車銑複合機
The GS-2000/3000 series provide full sizes and specification with multi-tasking capability to fulfill various machining requirements.
The low center of gravit y heav y- dut y bed and 30˚ s lant bed design provides optimal heavy cutting capability.
Modular spindle design provides flexibility for various machining conditions.
The optional servo tailstock increases machining e�ciency.
Maximum Performance CNC Turning Centers
4040
Comprehensive Machining Capability
Horizontal Turning Centers
Models GS-2000 GS-2600 GS-2800 GS-3300 GS-3600Max. swing diameter Ø 630 mm
Max. turning diameter Ø 570 mm
Max. turning length 780 / 1,530 mm 780 / 1,530 mm 780 / 1,530 mm 780 / 1,530 mm 746 / 1,496 mm
Chuck size Ø 8" Ø 10" Ø 10" Ø 12" Ø 15"
Bar capacity Ø 51 mm Ø 65 mm Ø 75 mm Ø 90 mm Ø 105 mm
Spindle nose A2-6 A2-8 A2-8 A2-8 A2-11
Spindle motor output ( cont. / 30 min. ) 15 / 18.5 kW 15 / 18.5 kW 15 / 18.5 kW 18.5 / 22 kW 18.5 / 22 kW
X / Y axes travel 300 / ±50 mm
Z-axis travel 780 / 1,530 mm
X / Z / Y axes rapids 30 / 30 / 10 m/min.
Outstanding Multi-tasking Machining Capability Brand New Reinforced Structure Design
Specifications are subject to change without notice.
A
B
With the optional live tooling turret, C-axis, Y-axis and sub-spindle, The
GS-2000/3000 series can provide multi-tasking machining capability
such as turning, milling, drilling, tapping, rear machining, high precision
grooving and X-axis o�set drilling. It can prevent machining error caused
by moving between machines and also save time and man power.
Extra wide hardened and precision grinded box ways
are widely spaced, and directly cast on to the machine
bed and saddle for maximum strength and precision.
Generating twice the torque output of standard motor,
the wide-range FANUC αP series provides the ability to
take heavier cuts in the lower RPM ranges.
The optional high speed high precision built- in type
spindle and high torque German ZF gear type spindle
are also available.
Standard 12-tool servo turret. The
optional 12-tool live tooling turret
is also available.
GS-2000 / GS-3000 Series Previous Model
Ø 250 mm Ø 210 mm
19%Diameter Increased
Bed Floor Space Increased Slideway Span Increased
Slideway Width Increased
11% 23%
14% 25%Slideway Thickness Increased
A
CurvicCoupling
B
C D
CD
GLS-1500Horizontal Turning Centers
High Speed CNC Turning Centers
Co m p a c t m a c h i n e s i ze . Prov i d e s f u l l m u l t i -tasking turning capabilities.
30˚ slant-bed Meehanite casting structure.
3 axes linear guide way design. Maximum feed rate up to 30 m/min.
4242
Compact Machine Size with Powerful Cutting Capability
Horizontal Turning Centers
Models GLS-1500 GLS-2000
Max. swing diameter Ø 560 mm
Max. turning diameter Ø 430 mm
Max. turning length 330 / 630 mm
Chuck size Ø 6" Ø 8"
Bar capacity Ø 45 mm Ø 51 mm
Spindle nose A2-5 A2-6
Spindle motor output 7.5 / 11 kW ( cont. / 30 min. )
X / Y axes travel 230 / ±35 mm
Z-axis travel 330 / 630 mm
X / Z / Y axes rapids 30 / 30 / 10 m/min.
Compact machine size takes less floor
space which greatly increases factory
space usage.Specifications are subject to change without notice.
GLS-1500
2,124 mm1,523 mm
1,680 mm
Diverse Modular Turret Selection
High Performance Spindle System
Full Multi-tasking Machining Capability
Standard 12-station servo indexing turret
achieves 0.2 sec indexing time for adjacent
stations and 0.4 sec for stations at the
opposite end on the disk. The optional
24-station servo indexing turret, gang type
turret and live tooling turret modules are
also available.
The modern 30˚ s lant-bed Meehanite casting
structure provides smooth chip disposal and
easier operator access.
3 axes are designed with high performance linear
guide way which provides high precision, fast
movement and low wear advantages. X / Z axes
rapids can reach up to 30 m/min.
The high performance V-Belt driven spindle
system can reduce the heat generated by the
motor which will affect the accuracy of the
spindle. With the precision deceleration ratio
of the belt wheel, the motor and spindle can
simultaneously reach to maximum speed and
reduce the horse power during low speed
and increase torque.
With the optional live tooling turret, Y-axis
and sub-spindle, The GLS-1500 series can
provide multi-tasking machining capability
such as turning, milling, drilling, tapping, slant
surface machining and rear-end machining.
It can prevent machining error caused by
moving between machines and also save
time and man power.
TLVTapping Centers
Provides 10,000 / 12,000 rpm high speed direct-drive spindle to choose from.
Can be equipped with SIEMENS, MITSUBISHI or FANUC control based on different requirements.
C o m p a c t m a c h i n e s i z e p r o v i d e s h i g h f l o o r space usage.
Chip cart and coolant tank are detachable for easy maintenance.
Circular coolant nozzle provides optimal chip removal.
High Speed Tapping Center
4444
Tapping Centers
Models TLV-500 TLV-700X-axis travel 500 mm 700 mm
Y-axis travel 400 mm
Z-axis travel 300 mm
Dist. from spindle nose to table top 180 ~ 480 mm
Table size ( X x Y ) 600 x 400 mm
Table load capacity 250 Kg
Spindle taper BT30
Spindle motor ( SIEMENS ) 4 / 14 kW ( cont. / peak )
Spindle speed 10,000 / 12,000 rpm
Machine weight 2,500 Kg
Axial Feeding System Front-end Tool Magazine
The 14-station front-end tool magazine provides stable and
fast machining conditions.
The optional servo indexing turret type magazine is also
available. Tool change movements are single step, without
pauses, no matter how many stations are skipped.
3 axes feeding system uses absolute servo direct-
d r i v e m o t o r t o p r o v i d e p o w e r f u l t h r u s t a n d f a s t
acceleration/ deceleration movements, which greatly
d e c r e a s e s m o t o r l o a d a n d h e a t w h i l e e n s u r i n g
optimal performance and accuracy.
All components are used with Finite Element Methods ( FEM ),
which provides advantages of an optimal design and a light-
weighted structure, to ensure overall mechanical rigidity.
The center-symmetric spindle head reduces thermal distortion
while ensuring structural stability and machining accuracy.
The direct-drive spindle provides 45 N-m of torque which can
fulfill high speed machining requirements ( SIEMENS ).
T h e B T 3 0 s p i n d l e p r o v i d e s l o w e n e r g y c o n s u m p t i o n a n d
outstanding surface roughness advantages.
The axial drive system is driven by a direct-drive motor which
provides optimal indexing precision and fast indexing capability.
Large size chip groove with circular coolant nozzle provides
optimal chip removal.
High Speed Tapping Center
High Speed Machining Strategy
Specifications are subject to change without notice.
48 m/min. 1.2 sec.1G 3 axes rapids T-TAxial Acceleration
Ultra Performance MachinesThe Product Line-up
Swiss Turning Centers
GMS Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
High SpeedVertical Turning Center
GV-500
SD-16 SW-20
GMT
High SpeedVertical Turning Center
GV-780
SD-20 SW-32
GTS
High RigidityVertical Turning Center
GV-1000
GTX
Heavy DutyVertical Turning Center
GV-1
Vertical Turning Centers
Multi-axis Turning Centers
Tool Spindle Type5-axis Turning Center
Turret Type 5-axis Turning Center
Twin spindles & Twin Turrets Turning Center
Multi-tasking Turning Center
Chuck size 6" / 8" / 10" Chuck size 8" / 8" ( Ø 65 ) Chuck size 8" / 10" Chuck size 8" / 10"
Chuck size 12" ~ 15" Chuck size 15" / 18" Chuck size 15" ~ 24"
18" ~ 32" Table Diameter Ø 1,250 / 1,600 mm
Max. machining diameter Ø 16 mm Max. machining diameter Ø 20 mm Max. machining diameter Ø 20 mm Max. machining diameter Ø 32 mm
CompactSWISS Turning Center
Multi-taskingSWISS Turning Center
CompactSWISS Turning Center
Multi-taskingSWISS Turning Center
4646
VerticalMachining Centers
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Series
Gang Type Turning CenterTS-100
Ultra PerformaceTurning Center
GS-200
Ultra Performace Turning Center
GS-4000
SW-42
High Speed Turning CenterGLS-1500
Maximum Performance Turning Center
GS-2000
Heavy Duty Turning CenterGS-6000
High RigidityVertical Machining Center
MLV
High C/P ValueTurning Center
GCL-2
High PerformanceTurning Center
GA-3000
Heavy Duty Turning CenterGS-8000
High PerformanceWheel Turning Center
GA-3600/W24
High PerformanceTurning Center
GA-2000
Maximum Performance Turning Center
GS-3000
Flat-bed Turning CenterHA
High Speed Tapping Center TLV
Tapping CentersWheelTurning Centers
Horizontal Turning Centers
Chuck size 8"
Chuck size 10" / 12" / 15"
Chuck size 21"~32"
Chuck size 8" / 10" / 10" ( Big-Bore )
Chuck size 12" / 15"
Chuck size 24" ~ 63"
Chuck size 6" / 8"
Chuck size 8" / 10" / 10" ( Big-Bore )
Chuck size 15" ( 18" ) / 24"
Chuck size 6"
Chuck size 8" / 10" / 10" ( Big-Bore )
Chuck size 12" / 15" / 18" / 24"
X-axis Travel 500 ~ 1,020 mm
Y-axis Travel 400 ~ 610 mm
Z-axis Travel 440 ~ 610 mm
X-axis Travel 500、700 mm
Y-axis Travel 400 mm
Z-axis Travel 300 mm
3-jaws hydraulic chuck 12" / 15" Max. machining diameter Ø 42 mm
Multi-taskingSWISS Turning Center
Copyright 2013 by Goodway Machine Corp. All right reservedG-Journal-EN-F-20130227
GOODWAY MACHINE CORP.
GOODWAY (SUZHOU) MACHINE CORP.
Headquarters
Central Taiwan Science Park Branch
No.13, 5Th Road,Taichung Industrial Park,Taichung City, 407, Taiwan, R.O.C.Website : www.goodwaycnc.comE-mail : [email protected]
No. 38, Keyuan Road, Central Taiwan Science Park.Taichung, Taichung City, 407, Taiwan, R.O.C.TEL : + 886-4-2463-6000 FAX : + 886-4-2463-9600
www.GOODWAYCNC.com.
No.589, Chengyang Road,Xiang Cheng Economic Development District Suzhou City, Jiangsu, ChinaTEL : + 86-512-6576-3699 FAX : + 86-512-6576-7299E-mail : [email protected]
