Date post: | 21-Feb-2017 |
Category: |
Education |
Upload: | stm-journals |
View: | 11 times |
Download: | 1 times |
ISSN 2229-6972 (Online)
ISSN 2347-7237 (Print)
Journal of Control & Instrumentation
(JoCI)September–December 2016
www.stmjournals.com
STM JOURNALSScientific Technical Medical
STM Journals, a strong initiative by Consortium E-Learning Network Private Ltd. (established 2006), was
launched in the year 2010 under the support and guidance by our esteemed Editorial and Advisory Board
Members from renowned institutes.
Objectives:
Promotion of Scientific, Technical and Medical research.
Publication of Original Research/Review, Short Articles and Case Studies through
Peer Review process.
Publishing Special Issues on Conferences.
Preparing online platform for print journals.
Empowering the libraries with online and print Journals in Scientific, Technical
and Medical domains.
Publishing and distribution of books on various subjects in the category of Nanotechnology,
Scientific and Technical Writing, and Environment, Health and Safety.
Salient Features:
A bouquet of 100+ Journals that fall under Science, Technical and Medical domains.
Employs Open Journals System (OJS)—a journal management and publishing system.
The first and one of the fastest growing publication website in India as well as in abroad
for its quality and coverage.
Rapid online submission and publication of papers, soon after their formal
acceptance/finalization.
Facilitates linking with the other authors or professionals.
Worldwide circulation and visibility.
Journal of Control & Instrumentation
ISSN: 2229-6972(online), ISSN: 2347-7237(print)
Focus and Scope Covers
Advanced Manufacturing Systems
Adaptive Control, Advanced computing for Measurement
Artificial Intelligence and its Applications
Control and Automation, Robotics
Dynamic Simulation
Man/Machine Interface
Sensors & Signal Processing
Journal of Control & Instrumentation is published (frequency: three times a year) in India by STM Journals (division of
Consortium e-Learning Network Private Ltd. Pvt.) The views expressed in the articles do not necessarily reflect of the
Publisher. The publisher does not endorse the quality or value of the advertised/sponsored products described therein.
Please consult full prescribing information before issuing a prescription for any products mentioned in this publication.
No part of this publication may be reproduced, stored in retrieval system or transmitted in any from without written
permission of the publisher.
To cite any of the material contained in this Journal, in English or translation, please use the full English reference at the
beginning of each article. To reuse any of the material, please contact STM Journals ([email protected])
STM Journals
STM Journals (division of Consortium e-Learning Network Private Ltd. ) having its Marketing office located at Office
No. 4, First Floor, CSC pocket E Market, Mayur Vihar Phase II, New Delhi-110091, India is the Publisher of Journal.
Statements and opinions expressed in the Journal reflect the views of the author(s) and are not the opinion of STM
Journals unless so stated.
Subscription Information and Order:
National Subscription:
Print - Rs 3750/- per Journal ( includes 3 print issues), Single Issue copy purchase: Rs 1500.
Online - Rs 3750/- per Journal inclusive Service Tax ( includes 3 online issues), Single Issue purchase: Rs 1500
inclusive Service Tax
Print + Online - Rs 5000/- per Journal inclusive Service Tax ( includes 3 print & online issues).
International Subscription:
Online Only- $199, Print Only-$299 (includes 3 print issues)
Online + Print-$399 (includes 3 print issues + online access of published back volumes )
To purchase print compilation of back issues please send your query at [email protected]
Subscription must be prepaid. Rates outside of India includes delivery. Prices subject to change without notice.
Mode of Payment: At par cheque, Demand draft, and RTGS (payment to be made in favor of
Consortium E-Learning Network. Pvt. ltd., payable at Delhi/New Delhi.
Online Access Policy
A). For Authors:
In order to provide maximum citation and wide publicity to the authors work, STM Journals also have Open Access
Policy, authors who would like to get their work open access can opt for Optional Open Access publication at
nominal cost as follows
India, SARC and African Countries: INR 2500 or 100 USD including single hard copy of Author's Journal.
Other Countries: USD 200 including single hard copy of Author's Journal.
B). For Subscribers:
Online access will be activated within 72 hours of receipt of the payment (working days), subject to receipt of
correct information on user details/Static IP address of the subscriber.
The access will be blocked:
If the user requests for the same and furnishes valid reasons for blocking.
Due to technical issue.
Misuse of the access rights as per the access policy.
Advertising and Commercial Reprint Inquiries: STM Journals with wide circulation and visibility offer an excellent
media for showcasing/promotion of your products/services and the events-namely, Conferences, Symposia/Seminars
etc. These journals have very high potential to deliver the message across the targeted audience regularly with each
published issue. The advertisements on bulk subscriptions, gift subscriptions or reprint purchases for distribution etc. are
also very welcome.
Lost Issue Claims: Please note the following when applying for lost or missing issues:
Claims for print copies lost will be honored only after 45 days of the dispatch date and before publication of the
next issue as per the frequency.
Tracking id for the speed post will be provided to all our subscribers and the claims for the missing Journals will
be entertained only with the proofs which will be verified at both the ends.
Claims filed due to insufficient (or no notice) of change of address will not be honored.
Change of Address of Dispatch should be intimated to STM Journals at least 2 months prior to the dispatch
schedule as per the frequency by mentioning subscriber id and the subscription id.
Refund requests will not be entertained.
Legal Disputes
All the legal disputes are subjected to Delhi Jurisdiction only. If you have any questions, please contact the Publication
Management Team: [email protected]; Tel : +91 0120-4781211.
Gargi Asha Jha
Manager (Publications)
PUBLICATION MANAGEMENT TEAM
Internal Members
External Members
Bimlesh Lochab
Assistant Professor
Department of Chemistry
School of Natural Sciences, Shiv Nadar University
Gautam Buddha Nagar, Uttar Pradesh, India
Dr. Rajiv Prakash
Professor and Coordinator
School of Materials Science and Technology
Indian Institute of Technology (BHU), Varanasi
Uttar Pradesh, India
Dr. Rakesh Kumar
Assistant Professor
Department of Applied Chemistry
BIT Mesra, Patna,
Bihar, India
Prof. S. Ramaprabhu
Alternative Energy and Nanotechnology Technology
Laboratory, Department of Physics
Indian Institute of Technology, Chennai
Tamil Nadu, India
Himani Pandey
Isha Chandra
Senior Associate Editors
Dr. Yog Raj Sood
Dean (Planning and Development)
Professor, Department of Electrical Engineering
National Institute of Technology, Hamirpur
Himachal Pradesh, India
Prof. Chris Cannings
Professor, School of Mathematics and Statistics
University of Sheffield,
Sheffield
United Kingdom
Dr. D. K. Vijaykumar
MS, MCh (Surgical Oncology), Professor and
Head Department of Surgical Oncology
Amrita Institute of Medical Sciences and Research Centre
Ponekkara, Cochin, Kerala, India
Dr. Durgadas Naik
Associate Professor (Microbiology)
Management and Science University,
University Drive, Seksyen13
Selangor, Malaysia
Prof. José María Luna Ariza
Department of Computer Sciences and
Numerical Analysis
Campus of Rabanales
University of Córdoba, Spain
Dr. Khaiser Nikam
Professor, Library and Information Science
Department of Library and Information Science
University of Mysore
Mysore, India
Quaisher J Hossain
Senior Editor
Group Managing Editor Dr. Archana Mehrotra
Managing DirectorCELNET, Delhi, India
Meenakshi Tripathi
Shivani Sharma
Chairman Mr. Puneet Mehrotra
Director
Shambhavi Mishra
Associate Editors
Sugandha Mishra
Prof. Priyavrat TharejaDirector Principal
Rayat Institute of Engineering and Information Technology
Punjab, India
Dr. Baldev RajDirector, National Institute of Advanced Studies
Indian Institute of Science campus Bangalore
Karnataka, India
Former Director
Indira Gandhi Centre for Atomic Research,
Kalpakkam, Tamil Nadu, India
Dr. Pankaj PoddarSenior Scientist
Physical and Materials Chemistry Division,National Chemical Laboratory
Pune, Maharastra India
Prof. D. N. RaoProfessor and Head
Department of BiochemistryAll India Institute of Medical Sciences
New Delhi, India
Dr. Nandini Chatterjee SinghAdditional Professor
National Brain Research CentreManesar, Gurgaon
Haryana, India
Dr. Ashish RunthalaLecturer, Biological Sciences Group
Birla Institute of Technology and SciencePilani, Rajasthan,
India
Dr. Bankim Chandra RayProfessor and Ex-Head of the Department
Department of Metallurgical and Materials Engineering
National Institute of Technology, RourkelaOdisha, India
Prof. Yuwaraj Marotrao GhugalProfessor and Head
Department of Applied MechanicsGovernment College of Engineering
Vidyanagar, Karad Maharashtra, India
Dr. Hardev Singh VirkVisiting Professor, Department of Physics
University of SGGS World UniversityFatehgarh Sahib, Punjab,
IndiaFormer Director Research
DAV Institute of Engineering and TechnologyJallandhar, India
Dr. Shrikant Balkisan DhootSenior Research Scientist, Reliance Industries Limited, Mumbai, India
Former Head (Research and Development)Nurture Earth R&D Pvt Ltd., MIT Campus
Beed Bypass Road, Aurangabad Maharashtra, India
STM JOURNALS
ADVISORY BOARD
Dr. Rakesh KumarAssistant Professor
Department of Applied ChemistryBirla Institute of Technology
Patna, Bihar, India
Prof. Subash Chandra MishraProfessor
Department of Metallurgical and Materials Engineering
National Institute of Technology, RourkelaOdisha, India
Dr. Shankargouda PatilAssistant Professor
Department of Oral PathologyKLE Society's Institute of Dental Sciences
Bangalore, Karnataka, India
Prof. Sundara RamaprabhuProfessor
Department of PhysicsIndian Institute of Technology Madras
Chennai, Tamil Nadu India
Dr. Baskar KaliyamoorthyAssociate Professor
Department of Civil EngineeringNational Institute of Technology, Trichy
Tiruchirappalli, Tamil Nadu, India
STM JOURNALS
ADVISORY BOARD
Editorial Board
Dr. Dipak AdhyaruDepartment of Electrical Engineering,
Indian Institute of Delhi, Hauz Khas,
New Delhi (India)
Dr. Bidyadhar SubudhiProfessor-in-Charge, Centre for Industrial
Electronics & Robotics, Department of
Electrical Engineering National Institute
of Technology, Rourkela, India.
Dr. M V. VaidyanProfessor, Department of Electrical
Engineering, National Institute of
Technology Calicut, Kerala , India.
Dr. Ketan PravinchandraAssistant Professor, Department of
Electrical Engineering, Indian Institute
of Technology Hyderabad,
Yeddumailaram, Andhra Pradesh, India.
M ManimaranScientific officer, IGCAR,
Kanchipuram, Tamil Nadu, India.
Dr. Chandar TsProfessor and Head, Dept. of Electronics
and Communication, PES Institute
of Technology, Bangalore, India.
Dr. Sabura BanuProfessor,Department of Electronics and
Instrumentation Engineering BS
Abdur Rahman University,Vandalur,
Tamilnadu, India.
Dr. J. Mohanalin Raja RathnamProfessor, St. Joseph's College of
Engineering and Technology, Palai, India.
Dr. Kiran ChakravarthulaAssociate Professor, Dept. of Electronics
&Instrumentation Engineering, V.N.R.
Vignana Jyothi Institute of Engineering &
Technology, Hyderabad, India.
Dr. Santhosh K. V.Assistant Professor, Department
of Instrumentation and Control
Engineering, Manipal Institute of
Technology, Manipal India.
Dr. S GaneshkumarAssistant Professor, Department of EEE
Anna University, Sardar Patel Road,
Chennai, Tamil Nadu, India.
Dr. Anand JattiAssociate Professor,
Dept of Instrumentation Technology,
R.V.College of Engineering,
Bengaluru, Karnataka, India.
It is my privilege to present the print version of the [Volume 7 Issue 3] of our Journal of Control &
Instrumentation, 2016. The intension of JoCI is to create an atmosphere that stimulates vision,
research and growth in the area of Control & Instrumentation.
Timely publication, honest communication, comprehensive editing and trust with authors and
readers have been the hallmark of our journals. STM Journals provide a platform for scholarly
research articles to be published in journals of international standards. STM journals strive to publish
quality paper in record time, making it a leader in service and business offerings.
The aim and scope of STM Journals is to provide an academic medium and an important reference
for the advancement and dissemination of research results that support high level learning, teaching
and research in all the Science, Technology and Medical domains.
Finally, I express my sincere gratitude to our Editorial/ Reviewer board, Authors and publication
team for their continued support and invaluable contributions and suggestions in the form of
authoring writeups/reviewing and providing constructive comments for the advancement of the
journals. With regards to their due continuous support and co-operation, we have been able to publish
quality Research/Reviews findings for our customers base.
I hope you will enjoy reading this issue and we welcome your feedback on any aspect of the Journal.
Dr. Archana Mehrotra
Managing Director
STM Journals
Director's Desk
STM JOURNALS
1. Virtual Instrumentation System for 3D Tilt Estimation of Moving Object using MEMS Multi-Sensor Fusion Ramswaroop Yadav, Roop Pahuja 1
2. Design and Implementation of Phase Shift Full Bridge DC-DC Converter for Photovoltaic Application Shamkumar B. Chavan, Mahesh S. Chavan 21
3. Energy Management of a Solar Powered Electric Vehicle with Multiple-Energy Storage via Optimized Fuzzy ControllerSaeed Khoobi Arani, Sayyed Hossein Edjtahed, Abolfazl Halvaei Niasar 28
4. Implementation of Closed Loop Control of Flow in Air Blower System Using PLC and SCADAHiren Patel, Mihir Raval 39
5. Stabilizing Internal Damping in Hydrodynamic Bearings using Elegant Control StrategiesS.J. Siva Abhishek, Niranjan Kumar Gupta, Abhro Mukherjee, Satyabrata Das 44
ContentsJournal of Control & Instrumentation
JoCI (2016) 1-20 © STM Journals 2016. All Rights Reserved Page 1
Journal of Control & Instrumentation ISSN: 2229-6972(online), ISSN: 2347-7237(print)
Volume 7, Issue 3 www.stmjournals.com
Virtual Instrumentation System for 3D Tilt Estimation of
Moving Object using MEMS Multi-Sensor Fusion
Ramswaroop Yadav, Roop Pahuja* Department of Instrumentation and Control Engineering,
Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India
Abstract This paper considers the problem of 3D tilt estimation of moving object and development of virtual instrumentation (VI) based system prototype with motion-user interface using six degree of freedom data from MEMS accelerometer and gyroscope. To overcome the inherent limitations of both the sensors and minimize accelerometer noise error and gyroscope drift error, the sensor signals are fused using established Kalman filter and newer, simple and equally efficient complementary filter. The raw data from the sensors is acquired using embedded controller and online analysed on the dedicated virtual instrument using data fusion algorithms. The estimated tilt angles along X, Y, Z axis caused by roll, pitch or yaw motion of the object are graphically plotted and more interactively displayed on the virtual model of 3D aerial object. Also, comparative study of complementary filter and Kalman filter is considered along with the brief overview of the complex and wide-ranging subject of multi-sensor data fusion. Keywords: MEMS accelerometer, gyroscope, tilt angle, data fusion, virtual motion, interface, virtual instrumentation
INTRODUCTION In the case of dynamic systems, pedestrian or aerial moving vehicles such as ships, submarines, aircraft, guided missiles, such as mini aerial vehicle or unmanned aerial vehicle (UAV), etc., accurate sensing of position, motion and orientation of moving object is required for further control and analysis tasks [1, 2]. This is generally done using on-board inertial navigation system (INS) that is specialized computing system with integrated MEMS (micro-electromechanical system) sensors to provide navigation information about the object in motion, precisely with use of data fusion methods [1]. In this work, virtual instrumentation (VI) based inertial navigation system with graphical motion-user interface for reliable three dimensional tilt estimation of a dynamic system using data fusion of MEMS (micro-electromechanical) inertial sensors has been developed and tested. Virtual instrumentation is a technology that uses general purpose computers, data acquisition devices and graphical programming language to programme the functions and features of the instrument with
soft panel to operate the instrument [3]. It is widely used to create custom defined solutions for variety of measurements, signal processing and control applications that are flexible and easily expandable to suit future needs [4]. BACKGROUND
To address the complex and wide-ranging subject of multi-sensor data fusion, especially for a new reader in this area, a brief overview about the technology describing the definition, classification, methods and techniques and application areas, is presented in this section. Also, related current research work in the area of use of data fusion for navigation is discussed in detail. According to the work group of the joint directors of laboratories (JDL), data fusion is a multilevel process that deals with the automatic detection, estimation, association, correlation, and combination of data from several sources for quality improvement [5]. Multi-sensor data fusion as the term is described in literature, refers to combining of sensory data or data derived from sensory data from disparate homogeneous or heterogeneous sources such
JoCI (2016) 21-27 © STM Journals 2016. All Rights Reserved Page 21
Journal of Control & Instrumentation ISSN: 2229-6972(online), ISSN: 2347-7237(print)
Volume 7, Issue 3 www.stmjournals.com
Design and Implementation of Phase Shift Full Bridge
DC-DC Converter for Photovoltaic Application
Shamkumar B. Chavan1,*, Mahesh S. Chavan
2
1Department of Technology, Shivaji University, Kolhapur, Maharashtra, India 2Department of Electronics Engineering, KIT’s College of Engineering and Technology, Kolhapur,
Maharashtra, India
Abstract Soft switched converters offer merits like lowered switching losses, reduced size of magnetic devices, lowered converter size, etc. Therefore, it is preferred topology in converter’s design. It also allows use of higher switching frequency. This research work focuses on development of 1 kW prototype of phase shift full bridge DC-DC converter for photovoltaic application. This paper discusses component selection criteria, magnetic component design criteria, hardware and software design issues. Simulation results and experimental results performed on 1 kW prototype are presented.
Keywords: Phase shift full bridge DC-DC converter, soft switched full bridge converter, phase shift converter PV application
INTRODUCTION Full bridge DC-DC converters are widely used in medium to large power applications. Hard and soft switching schemes are used in converters to operate power devices. Nowadays trend is to use renewable energy sources for power generation. Photovoltaic modules are in use for power generation in which several types of converters are being experimented. Many researchers have worked on development of different converters for different power ratings. Work of few researchers is discussed here. Liu et al. implemented full bridge converter with current doubler scheme in which ZVS switching scheme is applied [1]. Here, minimum efficiency of 88% is obtained. Shin et al. proposed new technique to avoid circulating energy in ZVS-PSFB converter, which is based on series boost capacitor [2]. Here, output voltage regulation is achieved by varying voltage across capacitor with frequency. Ortiz et al. implemented FBDCDC converter for 11 kW application, here, component selection and design criteria are discussed [3]. Fans are used for cooling and efficiency of 97% is obtained. Yang et al. presented novel
PSFB converter topology in which ZVS is achieved by auxiliary inductor and transformer having finite magnetization inductance [4]. Improvement in efficiency is observed for the prototype developed in this work. Chao et al. developed full bridge converter based on phase shift control for ozone generation application [5]. In this, two power switches and one capacitor are added to obtain ZVS/ZCS schemes. PI algorithm is implemented using TMS320F28335 controller. Chen et al. presented novel switching control method for reduction of losses in conventional PSFB converters [6]. Kim et al. developed converter in which unipolar PWM technique and resonant circuit is used to minimize losses and for efficiency improvement [7]. Chavan et al. designed hard switched FBDCDC converter for PV application [8]. Tsukiyama et al. designed a PS-FBDCDC converter of 5 kW power with secondary side resonance and having higher efficiency for photovoltaic application [9]. Dudrik et al. designed soft switched PWM technique based FBDCDC converter for high power application [10]. Zhao et al. developed an efficient phase shift FBDCDC converter for
JoCI (2016) 28-38 © STM Journals 2016. All Rights Reserved Page 28
Journal of Control & Instrumentation ISSN: 2229-6972(online), ISSN: 2347-7237(print)
Volume 7, Issue 3 www.stmjournals.com
Energy Management of a Solar Powered Electric Vehicle
with Multiple-Energy Storage via Optimized Fuzzy
Controller
Saeed Khoobi Arani*, Sayyed Hossein Edjtahed, Abolfazl Halvaei Niasar
Department of Electrical and Computer Engineering, University of Kashan, Kashan, Iran
Abstract The optimum energy management is the main challenge of powered electric vehicles (EVs) with multiple energy storage systems. The solar powered EVs are enabled with multiple energy sources and storages, and so, achieving the optimum energy management schedule is a complicated optimization problem. This paper develops an optimized fuzzy controller using genetic algorithm (GA) for energy management of solar powered EV equipped with photovoltaic cells as well as two power banks including battery and super-capacitor. Design of fuzzy controllers relies too much on the expert experience and non-optimal design may lead to sub-optimal performance. To overcome this complexity, genetic algorithm (GA) is employed to optimally determine fuzzy rules and membership functions. The proposed approach is modelled in ADVISOR software. Standard driving cycle is used to simulate the proposed approach. Simulation results demonstrate the decrease on consumed power by the proposed optimal GA-Fuzzy controller in comparison with the standard fuzzy controller. Keywords: Electric vehicle (EV), energy management, fuzzy controller, genetic algorithm (GA), solar, ADVISOR
INTRODUCTION The management and control to run the transportation system has become more necessary due to the increasing fuel consumption in recent years. Traditionally, fossil fuels were the major energy resources for transportation system. However, price uncertainties, political issues of oil provider countries and environmental problems of fossil fuels resulted in a need to find other energy resources [1–3]. The transportation system as one of the major energy sectors is changing the internal combustion engines. Electric vehicles as one of the best possible option have been developed in the last decade and new development in battery and storage devices, charge and discharge infrastructures has led to relatively high penetration of these vehicles [4, 5]. According to above mentioned issues, optimum design of EVs is an important task. Optimal modeling and simulation of EVs leads to energy consumption and cost minimization. There are lots of simulation software to model and simulate the EVs in which ADVISOR seems to be more accurate.
Recently, due to the importance of EVs there has been an augmented interest in energy and power management and control field. A control strategy to reduce the energy consumption in super capacitor and fuel cell based EVs have been developed by Azib et al. and Thounthong et al. [6, 7]. Moreover, fuel consumption optimization has been modelled by Jiang et al. and Azib et al. for super capacitor and fuel cell based EVs [8, 9]. The developed method by Jiang et al. has also been examined on real EVs [8]. Azib et al. discussed that the super capacitor’s duty is to supply electric power in case of high power consumption of EV, especially in acceleration mode [9]. Adaptive control method for EVs with parallel pattern has been studied by Chasse et al.; the developed strategy in this article has been adapted with a driving schematic [10]. Azib et al. has modelled an EV system with just one convertor [11], while Dawei Gao et al. has used a fuzzy logic for optimum design of energy consumption in EVs [12].
JoCI (2016) 39-43 © STM Journals 2016. All Rights Reserved Page 39
Journal of Control & Instrumentation ISSN: 2229-6972(online), ISSN: 2347-7237(print)
Volume 7, Issue 3 www.stmjournals.com
Implementation of Closed Loop Control of Flow in Air
Blower System Using PLC and SCADA
Hiren Patel1,*, Mihir Raval
2
1Department of Electrical Engineering, S. V. National Institute of Technology, Surat, Gujarat, India 2Department of Electrical Engineering, NITECH Automation, Surat, Gujarat, India
Abstract
The intention of this paper is to design and implement the closed loop control of air flow rate in the air blower system. Desired value of flow rate is provide from the SCADA (Supervisory Control and Data Acquisition) and actual value of flow rate is measured through the flow sensor. Based on the difference between actual and desired value of flow rate, PLC (Programmable Logic Controller) increases or decreases the speed of three phase induction motor through VVVFD (Variable Voltage Variable Frequency Drive) to maintain the flow rate. Obtained results clearly indicate that desired value of flow rate is achieved nicely even under the influence of external disturbance. Keywords: Programmable Logic Controller (PLC), SCADA, VVVFD, Proportional Integral and Derivative controller (PID)
INTRODUCTION In many industries and in the fields of production practice, the accurate control of flow is very important especially in pharmaceutical, petroleum, metallurgy, chemical, building materials, food, machinery, petroleum and other industries. For the last few decades, Programmable Logic Controller (PLC) has been widely accepted in industries to control various quantities [1, 2]. In an automated system, PLC controller is usually the central part of a process control system. With execution of a program stored in program memory, PLC continuously monitors status of the system through signals from input devices. Based on the logic implemented in the program, PLC determines which actions need to be executed with output instruments. PLC has several known advantages including, flexibility, reliability, low power consumption and ease of expandability [3, 4]. Its flexible configuration will provide users with software tools to quickly build industrial automatic control system. SCADA stands for Supervisory Control and Data Acquisition, which offers graphical visual representation of process parameters even from the remote places through computers. SCADA creates the possibility of controlling as well as monitoring of process parameters through GUI interface. PLC can communicate with SCADA through various modes of communications. In
literature, authors have reported control of varies quantities through PLC and SCADA, for example supervisory control of electrical transmission line was discussed in [5] and dynamic flow controller was discussed in [6]. Temperature control system using fuzzy logic was proposed in [7] and constant pressure irrigation pump was implemented in [8]. But the results are not available for the closed loop control of air flow rate with PLC, SCADA and VVVFD for the air blower system. Hence, here we have implemented the closed loop control of air flow rate through PLC, SCADA and VVVFD. IMPLEMENTATION OF AIR
BLOWER SYSTEM Consider the air blower system as shown in the Figure 1. It consists of the air blower, which is operated by three phase induction motor. This air blower blow the air in the connected pipe, on which flow meter and other sensors are mounted as shown in the Figure 1. Flow rate of air can be easily varied by varying the speed of the three phase induction motor. The speed of induction motor is directly proportional to the supply frequency and no. of poles of motor
JoCI (2016) 44-49 © STM Journals 2016. All Rights Reserved Page 44
Journal of Control & Instrumentation ISSN: 2229-6972(online), ISSN: 2347-7237(print)
Volume 7, Issue 3 www.stmjournals.com
Stabilizing Internal Damping in Hydrodynamic Bearings
using Elegant Control Strategies
S.J. Siva Abhishek1,*, Niranjan Kumar Gupta
1, Abhro Mukherjee
2, Satyabrata Das
2 1Department of Electronics Engineering, Indian Institute of Technology (Indian School of Mines),
Dhanbad, Jharkhand, India 2Department of Electronics and Instrumentation Engineering, National Institute of Science and
Technology, Berhampur, Odisha, India
Abstract The implementation of elegant control strategies to stabilize the internal damping problem in hydrodynamic bearing has been proposed in this paper. This implementation deals or gives an advantage of good stability of hydrodynamic bearing, even at critical or threshold speeds where an unstable whirl occurs leading to instability assisted greatly by this internal damping factor. Related stability graphs have been plotted using MATLAB 2013 and models have been designed using SIMULINK. Keywords: Modelling, internal damping, force coefficients, stiffness coefficients, control law, whirl orbital response
INTRODUCTION Internal damping is a bit of complex phenomenon where the system dynamics are difficult to describe. This internal damping causes instability in hydrodynamic bearings due to effect of anti-symmetric forces, which are of non-potential nature. It is quite a difficult task to design compensators to control this instability for short journal bearings due to complexities in dynamics and difficulty in implementation of actuators in fixed reference. Lots of control strategies were used earlier like sliding mode controllers, robust controllers but due to complexity in dynamics and random nature of instability, the control algorithms have gone complicated and issues got aroused on their practical implementation. So, in this paper we deal with designing a simple elegant controller which can be easily implemented [1–5]. DYNAMICS Velocity Components
𝑉𝑓 = 𝑉𝑟 + 𝜔𝑥𝑟 (1) 𝑉𝑓 = 𝑉𝑟 + 𝜔𝑘 𝑥 (𝑥𝑖 + 𝑦𝑗 ) (2)
𝑉𝑓 = 𝑉𝑟 + 𝜔𝑦𝑖 − 𝜔𝑥𝑗 (3)
𝑉𝑥𝑓𝑉𝑦𝑓
= 𝑉𝑥𝑟𝑉𝑦𝑟
+ 0 𝜔
−𝜔 0 𝑥𝑦 (4)
Displacement Components
𝑋 𝑟𝑌 𝑟
= 𝑋 𝑓
𝑌 𝑓 +
0 −𝜔𝜔 0
𝑋𝑌 (5)
𝐹𝑥𝐹𝑦
= 𝑅𝑖 𝑋 𝑓
𝑌 𝑓 +
0 −𝜔𝑅𝑖
𝜔𝑅𝑖 0
𝑋𝑌 (6)
Let us consider the circulating component of force vector which is 2nd term of the previous equation:
𝐹𝑥𝐹𝑦
= 0 −𝜔𝑅𝑖
𝜔𝑅𝑖 0
𝑋𝑌 (7)
In vector notation,
�̅�𝑐 = −𝜔𝑅𝑖𝑦𝑖 + 𝜔𝑅𝑖𝑥𝑗 (8) Where, i, j are unit vectors in x, y directions. Special feature of this force is it cannot be derived from any potential forces, which implies:
�̅�𝑐 ≠ −∇∅ (9) for any ∅(𝑥,𝑦). This is proved by fact that it has non vanishing curl,
∇𝑥�̅�𝑐 = 2𝜔𝑅𝑖𝑘 ≠ 0 (10) The overall equation of motion will be,