Jspl Product

WORLD-CLASS PRODUCTS WORLD-CLASS PRODUCTS UNRIVALLEDUNRIVALLED TECHNOLOGIESTECHNOLOGIES

JINDAL STEEL & POWER LIMITED 1

OVERVIEW

JINDAL STEEL & POWER LIMITED

The US $ 2.1 billion Jindal Steel & Power Limited (JSPL), part of the US $ 12 billion OP Jindal

group is a leading transnational player in the steel, power, mining, infrastructure and oil and gas

sectors straddling across Asia, Africa, South America and Georgia. For further consolidation

and growth, the group is diversifying its investment strategies, relentlessly pursuing

opportunities to expand in its core areas and moving into high growth markets.

The JSPL success story is a testimony to the country's new economic scenario shaped by

reforms and entrepreneurial energy in India. JSPL enters a decade of exceptional promise with

modern and state-of-the-art facilities and large projects in the pipeline that would help it drive its

steel production capacity up to 34 MTPA.

From widest flat products and a range of long products including contemporary parallel flange

beams, JSPL offers a product to answer every need and niche in the steel market. JSPL also

produces world's longest 121 metre rails. On the offing are, plate mill to produce upto 4.85 metre

wide plates at Angul, Odisha, a bar and wire rod mill at Patratu, Jharkhand and a medium and

light structural mill at Raigarh, Chhattisgarh. In future, JSPL aims to grow even faster and

contribute more substantially to India's growth and prosperity.

JSPL has powered many ground-breaking initiatives, the latest being the Coal to Liquid project.

The company is investing close to US $ 8.4 billion on the Ramchandi Promotional Coal Block in

Odisha to produce an estimated 80,000 barrels per day (4.0 MMTPA) crude using environment-

friendly Indirect Coal Liquefaction technology from M/s. Lurgi of Germany.

JSPL is running a 358 MW captive power generation plant at Raigarh with waste heat recovered

from rotary kilns and coal middlings. Jindal Power Limited, subsidiary of JSPL is a power

generation company with a fully operational 1000 MW Thermal Power project at Tamnar, Raigarh

in the state of Chhattisgarh. Currently, JPL is expanding the capacity of its existing power plant at

Tamnar by setting up a 2400 MW (4 x 600 MW) Thermal Power Plant in the state of Chhattisgarh at

an estimated cost of Rs. 13,410 crore. The company is executing business expansion and

capacity addition programmes in thermal and hydro segments of power sector in the states of

Chhattisgarh, Jharkhand and Arunachal Pradesh being developed through Joint Venture with

Hydro Power Development Corporation of Arunachal Pradesh Limited (HPDCAPL) besides

establishing a presence in other forms of power generation such as gas, hydro, wind, nuclear

and solar power, with a focus on hydro and other forms of environment friendly renewable

energy sources.

Together with Jindal Power Limited (JPL), the company will muster a combined generation

capacity of 15,000 MW of power over the next ten years, helping the government deliver on its

vision of “Affordable Power for All by 2012”.

2 PRODUCT BROCHURE

GLOBAL REACH

Jindal Steel & Power Limited has acquired the development rights for 20 billion tonne of El

Mutun Iron Ore Reserves in Bolivia, South America. Jindal Steel Bolivia S.A. (JSB) will invest

US$ 2.1 billion on building steel, sponge iron, iron ore pellet and a power plant. The company

proposes to set up mining and steel making facilities, and establish the necessary

infrastructure through JSB. This is the largest investment by an Indian company in Latin

America and also the largest foreign investment on a single project in Bolivia. With coal

reserves in Indonesia and South Africa, the search for mines continues from Mozambique to

Madagascar and for diamonds in Democratic Republic of Congo and the states of

Chhattisgarh & Jharkhand in India.

FLAGSHIP PRODUCTS

Although JSPL's footprint covers the entire steel space, its two standout products are Medium

and Large size Hot Rolled Parallel Flange Beams and the world's longest (121-metre) rails.

World over parallel flange beams are the only accepted standard for large constructions

because they result in superior strength, savings in costs, are more durable and offer higher

load-bearing capacity. The rails are made to international specifications and support

comfortable and high speed rail travel. JSPL is the only integrated steel maker in the country

offering these two products.

Among other products, JSPL rolls out the widest steel plates in coil form of up to 2.5 metre width

and the full range of semi-finished products: billets, blooms, beam blanks, slabs and rounds in

wide ranging steel grades and sizes.

With our exclusive rage of products, we act as “one stop shop” for all structural steel requirements of a project/customer.

OVERVIEW


PRODUCTS

SEMI FINISHED PRODUCTS

Semi-finished products like Slabs, Billets, Blooms, Beam Blank and Rounds can be delivered

in a very wide range of carbon steel and alloy steel grades with ultra low gas and sulphur

contents and come assured with high internal soundness and dimensional uniformity.

Besides captive use, semi-finished products from Jindal Steel and Power Limited are being

widely used by the forging industry, rolling units and seamless pipe manufacturers in India as

well as International markets of Europe, South-East Asia, West Asia and the Middle East.

Product Specifications

SQUARE BILLETS AND BLOOMS

130 mm, 150 mm, 165 mm, 200 mm, 250 mm

RECTANGULAR BLOOMS

285 mm x 390 mm and 280 mm x 320 mm

BEAM BLANKS

480 x 420 x 120 mm, 355 x 280 x 90 mm

ROUNDS

140 mm, 160 mm, 200 mm, 220 mm, 255 mm, 280 mm, 305 mm, 355 mm diametre

SLABS

Width : 1500 mm to 2600 mm

Thickness : 215 mm, 250 mm & 280 mm

Length : 3.0 metre to 8 metre

Max. Weight : 24 MT per slab

4 PRODUCT BROCHURE

PRODUCTS

BEAMS/COLUMNS/CHANNELS

We have pioneered the production of Medium and Large size Hot Rolled Parallel Flange Beams and Columns in India

Considered a revolutionary product, Parallel Flange Beams from JSPL are most sought after

by structural engineers, architects and construction companies globally. The beams have

standard nominal depths with different flange and web thicknesses, thereby offering cost

competitive options in terms of unit weights and sectional properties. Manufactured as per

Indian and International standards, these are superior in terms of strength, efficiency, higher

axial and bending load bearing capacity, workability and economy vis-à-vis outdated tapered

flange beams.

JSPL's Parallel Flange Beams & Columns enable complex fabrications in high volumes due to

inherent functional advantages of these sections. When used under bending load, steel

savings between 10-25% are achieved, as beams of lower sectional weight can be used.

ApplicationsRefineries, Airports, Flyovers, Metro Rail Projects, Shopping Malls, Power Plants, Stadiums,

Cement & Steel Plants & Industrial Sheds, etc

Product Specifications

PARALLEL FLANGE BEAMS

UB 203 mm x 133 mm to 610 mm x 229 mm

NPB/IPE 300 mm x 150 mm to 600 mm x 220 mm

WPB/HE 600 mm x 300 mm to 900 mm x 300 mm

COLUMNS

UC 152 mm x 152 mm to UC 356 mm x 368 mm

CHANNELS

ISMC 250/300/400 mm

Steel GradesIS 2062 : E250A, E250B, E300, E350, E410

EN 10025 : S235JR, S275JR, S275JO, S275J2, S355JR, S355JO, S355J2

ASTM : A 36, A572 Gr. 50

JIS : SS 400, SM 490

*Other grades can also be supplied with prior agreement

Certifications• ISO 9001 & ISO 14001

• BIS certification for most of the sections.

• Certification for CE marking, mandatory for supply of sections to the construction industry in Europe and other export destinations.

• JSPL sections are also certified by ABS for supply to ship building industry.

• Certification from LRS and IRS are under process.

JSPL today rolls 32 different series and 91 different variants (unit-weights) of H-Beams & Columns in 150 mm to 900 mm size (UB and UC, NPB/ IPE, WPB/HE, sections).


RAILS

We have pioneered the manufacturing of 121 metre long track rails in the Indian sub-continent

JSPL manufactures the world's longest rails. These 'A' class rails ranging from 13 m to 121 m

length will make introduction of high speed rails in India, a reality. The availability of 121 metre

long rails ensures a drastic reduction of weld population in Indian rail tracks, resulting in better

riding comfort, enhanced safety and substantial savings in costs.

JSPL rails are rolled in sections IRS 52, UIC 54 & UIC 60 conforming to Indian Railways

specifications IRS T-12/2009 as well as various other international railway specifications. Rails

can be supplied in customized finished lengths upto 121 metre and Flash Butt welded rail

panels up to a length of 484 metre.

JSPL is also a preferred supplier for Crane Rails which find widespread usage in EOT Cranes

as well as for Gantry Crane Operations.

Applications• Rail Tracks for High Speed Trains, Sidings of Power Plants, Refineries, Cement, Fertiliser &

Steel Plants, etc.

• Crane Rails for Ports & Harbors, Factories, Mines, Launch Pads, Shipyards etc.

Product Dimensions

TRACK RAILS

UIC 54, UIC 60, IRS 52 sections

CRANE RAILS

CR 80, CR 100 sections

Steel Grades

TRACK RAILS

IRS T-12-2009 : Gr 880 Class A, Class B, IU

UIC 860 (0) : Gr 900A, 900 B, others as per prior agreement

EN 13674-1 : R 200, R 220, R 260

JSPL can also supply Electrical Conductivity Rails (ECR)

CRANE RAILS

IS 3443 : 55 C11, 50 C12

Certifications

• BSI-London for Quality (BS: EN 9002:2000)

• Environmental Management System (BS EN14001: 1996)

• RDSO (Indian Railways)

6

JSPL's Plate Mill produces plates in wide ranging dimensions up to 3.5 metre in width and in various steel grades as per Indian and International standards such as BS, EN, ASTM, JIS, LRS, ABS, DNV.

Manufactured in JSPL's Plate Mill using cutting-edge technology, these flat products are of

premium quality owing to sound steel refining properties such as LRF, VD and RH-Degasser

and very close rolling tolerances.

Production range includes entire spectrum of grades for various applications such as structural

usage, pressure vessels and boilers, heavy equipment, automobiles, corrosion resistant

applications, line pipe and shipbuilding etc.

ApplicationsGeneral Engineering, Structural Fabrication, Bridges & Flyovers, Shipbuilding, Boilers &

Pressure Vessels, Railway Wagons, Oil & Gas pipelines, etc.

Product Dimensions

DISCRETE PLATES

Thickness : 7 mm – 120 mm

Width : 1500 mm – 3500 mm

Max. weight : 24 MT per plate

FURNACE NORMALIZED PLATES

Thickness : 40 to 80 mm

CUT TO LENGTH PLATES


Width : 1500 mm – 2500 mm

Length : 6000 mm – 12500 mm

HOT ROLLED COILS


Width : 1500 mm – 2500 mm

Coil ID/OD : 700 mm min. 2000 mm max.

Max. Weight : 25 MT per coil

Grades

IS 2062 : E250A,E250BR/B0, E250C,E350A, E350BR/B0, E350C, E410A to E

IS 2002 : 1, 2, 3

IS 8917 : -

JSPL HT : 350/350 HI, 410/410 HI, 450/450 HI

JSPL HARD : -

IRS M41/97 : Corten A


ASTM : A36, A572, A573, A633, A242 Type I, A588 M-93 Gr A, A283, Gr A/B/C/D

EN 10025 : S 235, S 275, S 355

DIN 17100 : St. 37, 44, 52

ASTM A 515 : Grades 60 (415), 65 (450), 70 (485)

ASTM A 516 : Grades 55 (380), 60 (410), 65 (450), 70 (485)

ASTM A 537 class I : -

ASTM A 387 M : Gr 2 Cl.1, Cl.2, Gr 11 Cl.1, Cl.2, Gr 12 Cl.1, Cl.2, Gr 22 Cl.1, Cl.2

ASTM A 204 M : A, B, C

LRS/ABS/DNV : A, B, D, AH27, DH27, AH32, DH32, AH36, DH36 and equivalent

API 5L : Gr B, X-42, X-46, X-52, X-56, X-60, X-65, X-70

Certifications• BSI-London for Quality (BS: EN 9002:2000)

• Environmental Management System (BS EN14001: 1996)

• ISO 9001:2000 & ISO14001:2004

• CE, ADW-2000

• LRS, ABS & DNV certifications for shipbuilding (GL & NK certifications under process)

7

FABRICATED SECTIONS

Jindal Steel and Power Limited (JSPL) have recently added Fabricated Sections to its growing basket of quality products by offering:

• H-type Beams

• I-type Beams

• Box Sections

Manufacturing of these sections is completely as per user's specifications. Our fabricated

sections meet the quality standards demanded by the industry. Plates for the beams come from

our plate mill and are thoroughly inspected through various quality checks fully backed by mill

certificates.

FABRICATED BEAMS FROM JSPL (LARGE AND JUMBO)• Beams can be fabricated to very precise dimensions on account of automatic/mechanised

processing as compared to on-site fabrication

• The welding is done using submerged arc welding machines which enhances the quality of

weld far superior to on-site weld

• Beam sections as per user specification can be fabricated

• Very large size beams can be fabricated

• Finishes of beams are better than the site fabricated beams

• No manual handling of the beams in the process line and hence the possibilities of

mechanical damage is eliminated

• Beams can be delivered factory finished, face milled, shot-blasted and/or primer coated

condition.

• We can give finished products with stiffeners, drills, base plates etc.

ApplicationsLarge support columns and beams for Manufacturing & Process Plants, Airports, High Rise

Buildings, Power Plants, Stadiums, Flyovers etc.

Product DimensionsDepth : 350 to 2000 mm

Flange Width : 200 to 800 mm

Length : 4.0 to 18.0 metre

Web Thickness : 5 to 50 mm

Flange Thickness : 6 to 80 mm

8

In line with our corporate philosophy of continuing efforts to expand our product range to

offer a complete product basket to the customer, JSPL now also offers Wire Rods from its

state-of-the-art MORGAN make Wire Rod mill having a capacity of 0.6 million tonne per

annum at Patratu, Jharkhand.

Wire Rods from JSPL come with a promise of high quality and dimensional precision.

JSPL is able to offer Wire Rods in diametres starting from 5.2 mm upto 22.00 mm in a wide

range of steel grades from this facility to cater to customers' requirements.

Product DimensionsSize : 5.2 mm, 5.5 - 22.00 mm in 0.5 mm increments

Coil Outside Dia : 1250 mm

Coil Inside Dia : 850 mm

Coil Weight : 2,480 kg (nominal)

ApplicationsFasteners, Bolts, Rivets & Screws, General Purpose Wires, Nails, Electrode Wires, Industrial

Wires, Agriculture Wires, Chains and Upholstery Wires, Tyre Bead and Hose reinforcement

Wires, Pre-Stressed Concrete Strand Wires, Spring Wires, Wire Ropes etc.

Steel Grades

Low carbon grades : IS 7887, IS 2879, SAE 1008/1010/1012/1015/1018/1020

Medium carbon grades : SAE 1205/1030/1040, C45, EN-8D

High Carbon grades : 42A/B, 47A/B, 52A/B, 62A/B, 72B, 77A/B, 82A/B

PCI 10, PCI 15

CHQ grades : IS 1169, IS 2255, SAE 10B21, 15B25, 19MnB4

Alloy Steel : IS 4432, 16MnCr5, 20MnCr5, SAE8620


WIRE RODS

10 PRODUCT BROCHURE

FUTURE PROJECTS

TMT Bars from Rebar Mill PATRATU, JHARKHAND - Capacity 1 MT

• TMT Bars Upto Fe 550 grade

• Easy Bendability

• Easy Weldability

• High elongation (18-25% in all grades)

• Better strength

• Excellent ductility due to uniform elongation

• Most appropriate for earthquake prone areas

• Higher Corrosion Resistance than CTD bars

• Computerized & uniform ribs

• Savings of 8-15% compared to CTD bars

• BIS certified

ApplicationsWide spread construction purposes

GradesFE 415/FE 500 / FE 550

FE 500 D also being developed for seismic activity prone areas

Sizes (in mm) – 8,10,12,16,20,25,28 & 32

Certifications Planned

- BIS

- ISO 9001, ISO 14001

- CARES, UK

- BSI


PLATE MILL, ANGUL – CAPACITY 1.5 MT

The upcoming plate mill of Siemens VAI make at Angul will produce plates upto a width of 4.85

metre. With this plate mill being commissioned, Jindal Steel and Power Limited will pioneer the

production of ultra wide plates in India. The state-of-the-art plate mill will have facility for TMCR,

On-line & Off-line normalizing, Quenching & Self Tempering.

Applications

Ship Building, Line Pipe, Automotive, Pressure Vessel, Boilers, Pen Stocks, General Engineering

& Fabrication etc.

Grades

Wide ranging grades catering to above areas of applications are planned for development

Size Range


Width Range : 1500 mm – 4850 mm

Plate Weight : Max. 30 MT

MEDIUM & LIGHT STRUCTURAL MILL RAIGARH – CAPACITY 0.65 MT

Product Size Range

IPN Beams 240 – 300 mm

ISMB Beams 125 – 225 mm

IPEA & IPEB Beams 100 – 300 mm

HEA & HEB Beams 100 x 100 mm – 200 x 200 mm

ISMC Channels 175 – 400 mm

ISA Angles 100 – 200 mm X 8/10/12/16/18/20 mm

Unequal Angles 150 – 100 mm – 200 x 100 mm

Flats 50 x10 mm – 300 x 25 mm

Rails 30 lb/yard & 24 kg/m

NETWORK & ADDRESS

Head Office DCM Building, 3rd Floor, Plot No-94, Sec-32, Near Exit-9, Gurgaon - 122 001, Haryana. INDIAPh: +91 124 6689000 (Board)E-mail: [email protected]

EastRoom No. 61 & 63, 6th Floor,Circular Court, 8 A.J.C.Bose Road,Kolkata - 700017, West Bengal. INDIATel: +91 33 40218100Fax: +91 33 40218116E-mail : [email protected]

International Sales DivisionDCM Building, 3rd Floor, Plot No-94, Sec-32, Near Exit-9, Gurgaon - 122 001, Haryana. INDIAPh: +91 124 6689000 (B) 6689235 (D) E mail: [email protected]

WestJindal EnclaveBehind Marathe Udyog BhawanNew Prabhadevi Road, PrabhadeviMumbai - 400 025. INDIATel: +91 22 24238304/24238314Fax: +91 22 24238312E-mail: [email protected]

Central13 K. M. StoneG.E. Road, Mandir HasaudRaipur - 492 101Chhattisgarh. INDIATel: +91 771 2471205-7Fax: +91 771 3054671/2471001E-mail: [email protected]

Marketing Offices

NorthDCM Building, 3rd Floor, Plot No-94, Sec-32, Near Exit-9, Gurgaon-122 001, Haryana. INDIATel: +91 124 6689000 (B), 6689234 (D)E-mail: [email protected]

South2D, Century Plaza560 - 562, Anna SalaiChennai 600 018. INDIATel: +91 44 43546723/4,42172334, 43446950Fax: +91 44 42132334E-mail: [email protected]

Jindal Centre, 12, Bhikaiji Cama Place,New Delhi - 110 066. INDIATel: +91 11 26188340-50, Fax: +91 11 26161271

Corporate Office

OP Jindal RoadHisar - 125 005Haryana. INDIATel: +91 1662 222471- 84Fax: +91 1662 220476

Registered Office

RaigarhKharsia RoadRaigarh - 496 001 Chhattisgarh. INDIATel: +91 7762 227001-05Fax: +91 7762 227022-23E-mail: [email protected]

Works Offices

Raipur13 K. M. Stone, G.E. Road, Mandir Hasaud, Raipur - 492 101Chhattisgarh. INDIATel: +91 771 2471205-07Fax: +91 771 2471214, 2471120E-mail: [email protected]

AngulPlot No. 751, Near Panchmukhi Chhaka,Similipada, Angul - 759122, Odisha. INDIATel: +91 6761 254191-95Fax: +91 6761 254141/2E-mail: [email protected]

AhmedabadPlot No. 156/157, Mouje Eyava Near Hipolin Ltd.,Opp. Super Atta Sanand, Viramgam HighwaySanand, Ahmedabad - 382 110. INDIATel.: +91 2717 284116Fax : +91 2717 284216Mob.: 9638811555; 9099944001Email : [email protected]

ChennaiPlot No.4, Survey No. 110/2Kadappakkam Village, ManaliChennai - 600 103. INDIATelefax: +91 44 25930487

Stockyards

FaridabadBhakri, Badkhal - Pali RoadFaridabad - 121 009Haryana. INDIATelefax: +91 129 2484847

HyderabadSurvey No. 66-E, 67-E, 68-AShankarpally RoadNandigama VillagePatancheruvu, Medak Distt. - 502 319Andhra Pradesh. INDIATel: +91 8455 200309/310

KolkataC/o. Blue Moon Commercial (P) Ltd. Jaladhulagori, Sankrail, Opp. Ambuja Bengal FactoryDistt. Howrah - 711 313. INDIATelefax: +91 33 26791905

Nagpur17.5 K.M. Stone, Bhandara RoadMauza Kadoli, Tehsil KampteeDistt. Nagpur - 441104. INDIATel: +91 7109 270486

PatratuBalkudra, Patratu, Distt. Ramgarh, Jharkhand 829143. INDIATel: +91 6553 275724/275726Fax: +91 6553 275744

BarbilIron Ore Pellet PlantCommercial Office, Plot No. 507/365Barbil-Joda HighwayBarbil 758 035, Orissa. INDIATel: +91 6767 277300/349, 275511Fax: +91 6767 275617

JSPL IN INDIA

Hisar Delhi

Faridabad

Ahmedabad

Mumbai

Hyderabad

Chennai

Nagpur

Dongamahua

RaigarhRaipur

Angul

Patratu

Kolkata

Barbil

Tensa

Registered Ofice

Corporate Office, Marketing Head Office & International Sales

Works

Mines

Regional Marketing Offices

Stock Yards

Jindal Centre, 12, Bhikaiji Cama Place,New Delhi - 110066. India

Tel: +91 11 26188340-50, Fax: +91 11 26161271

www.jindalsteelpower.com


STRUCTURAL SECTIONS*

Beams Designation and Sectional Weights (kg/m)

1 UB 203 x 133 x 25/30

2 UB 254 x 146 x 31/37/43

3 UB 305 x 165 x 40/46/54

4 UB 356 x 171 x 45/51/57/67

5 UB 406 x 178 x 54/60/67/74

6 UB 457 x 152 x 52/60/67/74/82

7 UB 457 x 191 x 67/74/82/89/98

8 UB 533 x 210 x 82/92/101/109/122

9 UB 610 x 229 x 101/113/125/140

10 NPB/IPE 360 X 50.2 / 57.1 / 66

11 NPB/IPE 400 x 180 x 57.4/66.3/75.7

12 NPB/IPE 450 x 190 x 67.2/77.6/92.4

13 NPB/IPE 500 x 200 x 79.4/90.7/107.3

14 NPB/IPE 600 x 220 x 107.6/122.4/154.5

15 WPB / HE 320 X 97.6 / 127 / 245

16 WPB/HE 600 x 300 x 128.8/177.8/211.9/285.5

17 WPB/HE 700 x 300 x 149.9/204.5/240.5/300.7

18 WPB/HE 800 x 300 x 172/224/262/317

19 WPB/HE 900 x 30 x 198/252/291/333

Columns Designation and Sectional Weights (kg/m)

1 UC 152 x 152 x 23/30/37

2 UC 203 x 203 x 46/52/60/71/86

3 UC 254 x 254 x 73/89/107/132/167

4 UC 305 x 305 x 97/118/137/158/198/240/283

5 UC 356 X 368 X 129 / 153 / 177 /202

Channels Designation and Sectional Weights (kg/m)

1 ISMC 250 x 82 x 34.2

2 ISMC 300 x 90 x 36.3

3 ISMC 400 x 100 x 50.1

PRODUCT BROCHURE

*RAILS

Rail : IRS 52, UIC 60, UIC 54

Crane Rail : CR 80, CR 100

* Please refer Annexure A for dimensional details & sectional properties of these products.

PLATES

Thickness Range : 7 mm to 120 mm

Width Range : 1500 mm to 3500 mm

Length : 3 metre to 12.5 metre (as per requirement)

Standard Lengths : 5 metre, 5.6 metre, 6.3 metre, 7.1 metre, 8 metre, 9.3 metre, 10 metre, 12 metre, 12.5 metre

COILS

Thickness Range : 7 mm to 25 mm

Width Range : 1500 mm to 2500 mm

Coil Weight : 16 to 25 MT

FABRICATED SECTIONSDepth : 350 to 2000 mm

Flange Width : 200 to 800 mm

Length : 4.0 to 18.0 metre

Web Thickness : 5 to 50 mm

Flange Thickness : 6 to 80 mm

t f

tw

UB 203 x 133 x 25 25.1 203.2 133.2 5.7 7.8 7.6 31.97 2340 307.6 230.3 46.2 8.56 3.10

UB 203 x 133 x 30 30.0 206.8 133.9 6.4 9.6 7.6 38.21 2896 384.7 280 57.5 8.71 3.17

UB 254 x 146 x 31 31.1 251.4 146.1 6 8.6 7.6 39.68 4413 447.5 351.1 61.3 10.55 3.36

UB 254 x 146 x 37 37.0 256 146.4 6.3 10.9 7.6 47.17 5537 570.6 432.6 78 10.83 3.48

UB 254 x 146 x 43 43.0 259.6 147.3 7.2 12.7 7.6 54.77 6544 677.4 504.1 92 10.93 3.52

UB 305 x 165 x 40 40.3 303.4 165 6 10.2 8.9 51.32 8503 764.4 560.5 92.6 12.87 3.86

UB 305 x 165 x 46 46.1 306.6 165.7 6.7 11.8 8.9 58.75 9899 895.7 645.7 108 12.98 3.90

UB 305 x 165 x 54 54.0 310.4 166.9 7.9 13.7 8.9 68.77 11700 1063 753.6 127 13.04 3.93

UB 356 x 171 x 45 45.0 351.4 171.1 7 9.7 10.2 57.33 12070 811.1 686.7 94.81 14.51 3.76

UB 356 x 171 x 51 51.0 355 171.5 7.4 11.5 10.2 64.91 14140 968.3 796.4 112.9 14.76 3.86

UB 356 x 171 x 57 57.0 358 172.2 8.1 13 10.2 72.56 16040 1108 896 128.7 14.87 3.91

UB 356 x 171 x 67 67.1 363.4 173.2 9.1 15.7 10.2 85.49 19460 1362 1071 157.3 15.09 3.99

UB 406 x 178 x 54 54.1 402.6 177.7 7.7 10.9 10.2 68.95 18720 1021 930 115 16.48 3.85

UB 406 x 178 x 60 60.1 406.4 177.9 7.9 12.8 10.2 76.52 21600 1203 1063 135 16.8 3.97

UB 406 x 178 x 67 67.1 409.4 178.8 8.8 14.3 10.2 85.54 24330 1365 1189 153 16.87 3.99

UB 406 x 178 x 74 74.2 412.8 179.5 9.5 16 10.2 94.51 27310 1545 1323 172 17 4.04

UB 457 x 152 x 52 52.3 449.8 152.4 7.6 10.9 10.2 66.64 21370 645 950 84.64 17.91 3.11

UB 457 x 152 x 60 59.8 454.6 152.9 8.1 13.3 10.2 76.23 25500 794.6 1122 103.9 18.29 3.23

UB 457 x 152 x 67 67.2 458 153.8 9 15 10.2 85.55 28930 912.6 1263 118.7 18.39 3.27

UB 457 x 152 x 74 74.2 462 154.4 9.6 17 10.2 94.48 32670 1047 1414 135.6 18.6 3.33

UB 457 x 152 x 82 82.1 465.8 155.3 10.5 18.9 10.2 104.5 36590 1185 1571 152.5 18.71 3.37

UB 457 x 191 x 67 67.1 453.4 189.9 8.5 12.7 10.2 85.51 29380 1452 1296 152.9 18.54 4.12

UB 457 x 191 x 74 74.3 457 190.4 9 14.5 10.2 94.63 33320 1671 1458 175.5 18.76 4.20

UB 457 x 191 x 82 82.0 460 191.3 9.9 16 10.2 104.5 37050 1871 1611 195.6 18.83 4.23

UB 457 x 191 x 89 89.3 463.4 191.9 10.5 17.7 10.2 113.8 41020 2089 1770 217.8 18.99 4.29

UB 457 x 191 x 98 98.3 467.2 192.8 11.4 19.6 10.2 125.3 45730 2347 1957 243.5 19.11 4.33

ANNEXURE - A

Remarks

PRODUCT RANGEUniversal Beams & Columns, Channels and Rails

PARALLEL FLANGE BEAMS; UB SERIES

DescriptionBeams

SectionalWeight

Total Depth

FlangeWidth

Thicknessof Web

Thicknessof Flange

Rootradius

Area of section

Moment of Inertia

SectionalModulus

Radius of gyration

X Axis Y Axis X Axis Y Axis X Axis Y Axis

w H B t w t f r A Ixx Iyy Zxx Zyy rxx ryy

Kg/m mm mm mm mm mm cm2 cm4 cm4 cm3 cm3 cm cm

UB 533 x 210 x 82 82.2 528.3 208.8 9.6 13.2 12.7 104.7 47540 2007 1800 192.3 21.31 4.38

UB 533 x 210 x 92 92.1 533.1 209.3 10.1 15.6 12.7 117.4 55230 2389 2072 228.3 21.69 4.51

UB 533 x 210 x 101 101.0 536.7 210 10.8 17.4 12.7 128.7 61520 2692 2292 256.4 21.87 4.57

UB 533 x 210 x 109 109.0 539.5 210.8 11.6 18.8 12.7 138.9 66820 2943 2477 279.2 21.94 4.60

UB 533 x 210 x 122 122.0 544.5 211.9 12.7 21.3 12.7 155.4 76040 3388 2793 319.7 22.12 4.67

UB 610 x 229 x 101 101.2 602.6 227.6 10.5 14.8 12.7 128.9 75780 2915 2515 256 24.24 4.75

UB 610 x 229 x 113 113.0 607.6 228.2 11.1 17.3 12.7 143.9 87320 3434 2874 301 24.63 4.88

UB 610 x 229 x 125.1 125.1 612.2 229 11.9 19.6 12.7 159.3 98610 3932 3221 343 24.88 4.97

UB 610 x 229 x 139.9 139.9 617.2 230.2 13.1 22.1 12.7 178.2 111800 4505 3622 391 25.05 5.03

IPEA 300/NPB 300 x 150 x 36.5 36.5 297 150 6.1 9.2 15 46.53 7173 519 483.1 69.2 12.42 3.34

IPE 300/NPB 300 x 150 x 42.2 42.2 300 150 7.1 10.7 15 53.81 8356 603.8 557.1 80.5 12.46 3.35

IPEO 300/NPB 300 x 150 x 49.3 49.3 304 152 8 12.7 15 62.83 9994 745.7 657.5 98.12 12.61 3.45

IPE A360/NPB 350 x 170 x 50.2 50.2 357.6 170.0 6.6 11.5 18.0 64.0 14520 944.3 811.8 111.1 15.06 3.84

IPE 360/NPB 350 x 170 x 57.1 57.1 360.0 170.0 8.0 12.7 18.0 72.7 16270 1043 903.6 122.8 14.95 3.79

IPEO 360/NPB 350 x 170 x 66 66.0 364.0 172.0 9.2 14.7 18.0 84.0 19050 1251 1047 145.5 15.05 3.86

IPEA 400/NPB 400 x 180 x 57.4 57.4 397 180 7 12 21 73.1 20293 1170.6 1022.3 130.1 16.66 4.00

IPE 400/NPB 400 x 180 x 66.3 66.3 400 180 8.6 13.5 21 84.5 23128 1317.8 1156.4 146.4. 16.55 3.95

IPEO 400/NPB 400 x 180 x 75.7 75.7 404 182 9.7 15.5 21 96.5 26747 1564.2 1324.1 171.9 16.66 4.03

IPEA 450/NPB 450 x 190 x 67.2 67.2 447 190 7.6 13.1 21 85.5 29759 1502.4 1331.5 158.1 18.65 4.19

IPE 450/NPB 450 x 190 x 77.6 77.6 450 190 9.4 14.6 21 98.8 33743 1675.9 1499.7 176.4 18.48 4.12

IPEO 450/NPB 450 x 190 x 92.4 92.4 456 192 11 17.6 21 117.7 40923 2085.4 1794.9 217.2 18.65 4.21

IPEA 500/NPB 500 x 200 x 79.4 79.4 497 200 8.4 14.5 21 101.3 42933 1939.2 1727.7 193.9 20.61 4.38

IPE 500/NPB 500 x 200 x 90.7 90.7 500 200 10.2 16 21 115.5 48199 2141.7 1927.9 241.2 20.43 4.31

IPEO 500/NPB 500 x 200 x 107 107.0 506 202 12 19 21 136.7 57777 2621.7 2283.7 259.6 20.56 4.38

IPEA 600/NPB 600 x 220 x 108.0 108.0 597 220 9.8 17.5 24 137 82919 3116.3 2777.8 283.3 24.6 4.77

IPE 600/NPB 600 x 220 x 122.0 122.0 600 220 12 19 24 156 92083 3387.3 3069.4 307.9 24.3 4.66

IPEO 600/NPB 600 x 220 x 154.0 154.0 610 224 15 24 24 196.8 118302 4520.8 3678.8 403.6 24.52 4.79

HEAA 320/WPB 320 x 300 x 74.2 74.2 301 300 8.0 11 27 94.58 16450 4959 1093 330.6 13.19 7.24

HEA 320/WPB 320 x 300 x 97.6 97.6 310 300 9.0 15.5 27 124.4 22930 6985 1479 465.7 13.58 7.49

HEB 320/WPB 320 x 300 x 127 127.0 320 300 11.5 20.5 27 161.3 30820 9239 1926 615.9 13.82 7.57

HEM 320/WPB 320 x 300 x 245 245.0 359 309 21 40 27 312 68130 19710 3796 1276 14.78 7.95

HEAA 600/WPB 600 x 300 x 129 129.0 571 300 12 15.5 27 164.1 91872 6993.4 3217.9 466.2 23.66 6.53

HEA 600/WPB 600 x 300 x 178 178.0 590 300 13 25 27 226.5 141208 11271.3 4786.7 751.4 24.97 7.05

HEB 600/WPB 600 x 300 x 212 212.0 600 300 15.5 30 27 270 171041 13530.2 5701.4 902 25.17 7.08

HEM 600/WPB 600 x 300 x 285 285.0 620 305 21 40 27 363.7 237447 18975.5 7659.6 1244.3 25.65 7.22

PARALLEL FLANGE BEAMS; UB SERIES CONTD...

RemarksDescription

Beams

SectionalWeight

Total Depth

FlangeWidth

Thicknessof Web

Thicknessof Flange

Rootradius

Area of section

Moment of Inertia

SectionalModulus

Radius of gyration



Kg/m mm mm mm mm mm cm2 cm4 cm4 cm3 cm3 cm cm

PARALLEL FLANGE BEAMS; WPB/HE SERIES

PARALLEL FLANGE BEAMS; NPB/IPE SERIES

Equivalent to WPB 150 x 150 x 23



tf

tw

HEAA 700/WPB 700 x 300 x 150 150.0 670 300 13 17 27 190.9 142721 7673.1 4260.3 511.5 27.34 6.34

HEA 700/WPB 700 x 300 x 204 204.0 690 300 14.5 27 27 260.5 215301 12178.8 6240.6 811.9 28.75 6.65

HEB 700/WPB 700 x 300 x 241 241.0 700 300 17 32 27 306.4 256888 14440.8 7339.7 952.7 28.96 6.68

HEM 700/WPB 700 x 300 x 301 301.0 716 304 21 40 27 383 329278 18797.4 9197.7 1236.7 29.32 7.01

HEAA 800/WPB 800 x 300 x 172 172.0 770 300 14 18 30 218.5 208882 8133.7 5425.5 542.2 30.92 6.10

HEA 800/WPB 800 x 300 x 224 224.0 790 300 15 28 30 285.8 303442 12638.7 7682.1 842.6 32.58 6.65

HEB WPB 800 x 300 x 262 262.0 800 300 17.5 33 30 334.2 359083 14903.7 8977.1 993.6 32.78 6.68

HEM 800/WPB 800 x 300 x 317 317.0 814 303 21 40 30 404.3 442598 18627.4 10875 1229.5 33.09 6.79

HE 800 x 373* 373.0 826 308 25 46 30 474.6 523900 22530 12690 1463 33.23 6.89

HEAA 900/WPB 900 x 300 x 198 198.0 870 300 15 20 30 252.2 301145 9041.4 6922.9 602.8 34.55 5.99

HEA 900/WPB 900 x 300 x 252 252.0 890 300 16 30 30 320.5 422075 13547.5 9484.8 903.2 36.29 6.50

HEB 900/WPB 900 x 300 x 291 291.0 900 300 18.5 35 30 371.3 494065 15815.9 10979 1054.4 36.48 6.53

HEM 900/WPB 900 x 300 x 333 333.0 910 302 27 40 30 423.6 570400 18450 12540 1222 36.7 6.60

UC 152 x 152 x 23 23.0 152.4 152.2 5.8 6.8 7.6 29.25 1250 399.9 164 52.55 6.54 3.70

UC 152 x 152 x 30 30.0 157.6 152.9 6.5 9.4 7.6 38.26 1748 560.5 221.8 73.31 6.76 3.83

UC 152 x 152 x 37 37.0 161.8 154.4 8 11.5 7.6 47.11 2210 706.2 273.2 91.48 6.85 3.87

UC 203 x 203 x 46 46.1 203.2 203.6 7.2 11 10.2 58.73 4568 1548 449.6 152.1 8.82 5.13

UC 203 x 203 x 52 52.0 206.2 204.3 7.9 12.5 10.2 66.28 5259 1778 510.1 174 8.91 5.18

UC 203 x 203 x 60 60.0 209.6 205.8 9.4 14.2 10.2 76.27 6125 2065 584.4 200.6 8.96 5.20

UC 203 x 203 X 71 71.0 215.8 206.4 10 17.3 10.2 90.43 7618 2537 706 245.9 9.18 5.30

UC 203 x 203 x 86 86.1 222.2 209.1 12.7 20.5 10.2 109.6 9449 3127 850.5 299.1 9.28 5.34

UC 254 x 254 x 73 73.1 254.1 254.6 8.6 14.2 12.7 93.1 11420 3908 897.9 307 11.07 6.48

UC 254 x 254 x 89 88.9 260.3 256.3 10.3 17.3 12.7 113.3 14270 4857 1096 379 11.22 6.55

UC 254 x 254 x 107 107.1 266.7 258.8 12.8 20.5 12.7 136.4 17510 5928 1313 458.1 11.33 6.59

UC 254 x 254 x 132 132.0 276.3 261.3 15.3 25.3 12.7 138.1 22530 7531 1631 576.4 11.58 6.69

UC 254 x 254 x 167 167.1 289.1 265.2 19.2 31.7 12.7 212.9 30000 9870 2075 744.3 11.87 6.81

UC 305 x 305 x 97 96.9 307.9 305.3 9.9 15.4 15.2 123.4 22250 7308 1445 478.7 13.42 7.69

UC 305 x 305 x 118 117.9 314.5 307.4 12 18.7 15.2 150.2 27670 9059 1760 589.4 13.57 7.77

UC 305 x 305 x 137 136.9 320.5 309.2 13.8 21.7 15.2 174.4 32810 10700 2048 692.2 13.72 7.83

UC 305 x 305 x 158 158.1 327.1 311.2 15.8 25 15.2 203.4 38750 12570 2369 807.8 13.87 7.90

UC 305 x 305 x 198 198.1 339.9 314.5 19.1 31.4 15.2 252.4 50900 16300 2995 1037 14.2 8.04

UC 305 x 305 x 240 240.0 352.5 318.4 23 37.7 15.2 305.8 64200 20310 3643 1276 14.49 8.15

UC 305 x 305 x 283 282.9 365.3 322.2 26.8 44.1 15.2 360.4 78870 24630 4318 1529 14.79 8.27

UC 356 x 368 x 129 129.0 355.6 368.6 10.4 17.5 15.2 164.3 40250 14610 2264 792.8 15.65 9.43

UC 356 x 368 x 153 152.9 362 370.5 12.3 20.7 15.2 194.8 48590 17550 2684 947.5 15.79 9.49

UC 356 x 368 x 177 177.0 368.2 372.6 14.4 23.8 15.2 225.5 57120 20530 310.3 1102 15.91 9.54

UC 356 x 368 x 202 201.9 374.6 374.7 16.5 27 15.2 257.2 66260 23690 3538 1264 16.05 9.60

PARALLEL FLANGE COLUMNS; UC SERIES

PARALLEL FLANGE BEAMS; WPB/HE SERIES CONTD...

RemarksDescription

Beams

SectionalWeight

Total Depth

FlangeWidth

Thicknessof Web

Thicknessof Flange

Rootradius

Area of section

Moment of Inertia

SectionalModulus

Radius of gyration



Kg/m mm mm mm mm mm cm2

cm4

cm4

cm3

cm3

cm cm

ISMC 250 x 82 34.2 250 82 9 14.1 2.23 43.5 4080 244 326 40.9 9.68 2.37

ISMC 300 x 90 36.3 300 90 7.8 13.6 2.35 46.3 6420 313 428 47.1 11.8 2.60

ISMC 400 x 100 50.1 400 100 8.8 15.3 2.42 63.8 15200 508 760 67 15.4 2.82

INDIAN CHANNELS

Description

RemarksSectionalWeight

Total Depth

FlangeWidth

Thicknessof Web

Thicknessof Flange

Area of section

Moment of Inertia

SectionalModulus

Radius of gyration



Kg/m mm mm mm mm mm2cm 4cm cm

4cm

3cm

3cm cm

Cyy*

*Cyy is centre of gravity along YY Axis

TRACK RAILS

UIC 54 54.43As per IRS-T-12-2009, UIC-860-R, or EN-13674-1

UIC 60 60.34

IRS 52 51.89 As per IRS-T-12-2009

INDIAN CRANE RAILS Sectional Weight (Kg/m)

CR-80 64.2

As per IS : 3443 -1980 (INDIAN SPECIFICATION FOR CRANE RAIL SECTIONS)

CR-100 89.0

Sectional Weight (Kg/m)

As per IS 808 & tolerance as per IS 1852

For Structurals For Rails

Delivery Conditions for Beams/ Columns/ Channels and Rails

13 meter, length tolerance as per norm

As per UIC/ EN/ IRS norm as applicable

Bare, Loose and / or in bundles of max 5 MT each

As per norms

As per mutual agreement

For domestic sales : On actual weight basis

For exports : On theoretical weight basis

10 - 13 meter (-0/+100mm)

10 - 13 meter (-0/+100mm)

As per lot information

As per BS4-1:1993

As per IS:12778/ equivalance with EN-19-57

As per IS:12778/ equivalance with EN-53-62

Blue or with slight atmospheric rust

Superficial rust to slight rusted material to be acceptable

Size length / Grade / Heat no., Order no., Desired shipping marks

As per mutual agreement

For domestic sales : 5 MT per size per length and 22 MT in total. (In case of lesser order quantitiy, freight for full trailor/truck to buyer’s account)

For exports : 30 MT per size per length per grade for grades S275JR/equivalent and lower; Total order quantity : Min 500 MT50 MT per size per length and 100 MT per grade for grades S355JR/equivalent and higher; Total order quantity : Min 500 MT

For domestic sales : On actual weight basis or as per mutual agreement

For exports : On theoretical weight basis on nominal size & length

Length :

Dimensional Norms : (for prime & short-length material only)

Surface Condition :

Packing :

Marking :

Minimum Order Qty. :

Invoicing :

For prime

For non-prime

For short length

For UB/UC sections

For IPE/NPB sections

For prime

For non-prime / short length

Bare, Loose and / or in bundles of max 5 MT each

For prime

For non-prime / short length

For HE/WPB sections

Date post:	22-Oct-2014
Category:	Documents
Upload:	nileshmadankar
View:	95 times
Download:	5 times

Jspl Product

Documents