Date post: | 28-Jul-2015 |
Category: |
Technology |
Upload: | jumpwireio |
View: | 4,330 times |
Download: | 1 times |
Quick start
Setup hardware
● Arduino UNO● ESP8266 wifi module
Download the framework
● https://github.com/jumpwire-io/Arduino-ESP8266/archive/master.zip● Unzip and rename it to Arduino-ESP8266
Open Arduino-ESP8266.ino
Copy & paste sample code
● https://gist.github.com/028a705e7bc4be59f76b
Get your secret token
● https://console.jumpwire.io/
Set token, wifi ssid, wifi password
When uploading the code, temporarily disconnect PIN 0 (Arduino's RX pin) to avoid error.
Upload the code to Arduino
Cut off power and reconnect
● This means resetting Arduino and ESP8266 at the same time● It will be connected to the jumpwire.io server within 15 seconds.
● Throw “1” from the console, LED will turn ON.● Throw “0” from the console, LED will turn OFF.
Test it
Blinking?
Congrats!
● http://docs.jumpwire.io/○ How it works○ How to Throw a message from Arduino○ Troubleshooting
For more info
Thanks