K Deposition Materials
DDeeppoossiittiioonn MMaatteerriiaallss
SSppuutttteerr TTaarrggeettss TTaarrggeett BBoonnddiinngg SSeerrvviiccee MMaatteerriiaall RReeccllaaiimm SSeerrvviiccee
K Deposition Materials
CCOONNTTEENNTTSS
Sputter Targets | Circular
Page
K1 Aluminium Al Aluminium Copper AlCu Aluminium Nitride AlN
K2 Aluminium Oxide Al2O3
Antimony Sb Barium Ba Barium Titanate BaTiO3
Barium Fluoride BaF K3 Barium Oxide BaO
Barium Strontium Titanate BaSrTiO3
Bismuth Bi Bismuth Oxide Bi2O3
K4 Bismuth Selenide Bi2Se3
Bismuth Titanate Bi4Ti3O12
Boron B Boron Nitride BN Boron Carbide B4C
K5 Cadmium Cd Cadmium Selenide CdSe Cadmium Sulfide CdS Cadmium Telluride CdTe Carbon (Graphite) C
K6 Cerium Ce Cerium Fluoride CeF3
Cerium Oxide CeO2 Chromium Cr
K7 Chromium Oxide Cr2O3
Cobalt Co Cobalt Oxide CoO Copper Cu
K8 Copper Oxide CuO Dysprosium Dy Erbium Er Europium Eu Gadolinium Gd
K9 Germanium Ge Gold Au Hafnium Hf Hafnium Carbide HfC
K10 Hafnium Nitride HfN Hafnium Oxide HfO2
Holmium Ho Indium In
K11 Indium Oxide In2O3 Indium Tin Oxide (ITO) In2O3/SnO2
Iridium Ir Iron Fe
K12 Iron Oxide Fe2O3 Lanthanum La Lanthanum Aluminate LaAlO3 Lanthanum Oxide La2O3 Lead Pb
Page
K13 Lead Telluride PbTe Lead Titanate PbTiO3 Lead Zirconate PbZrO3
Lead Zirconate Titanate (PZT) ` PbZr1-xTixO3 Magnesium Mg
K14 Magnesium Fluoride MgF2 Magnesium Oxide MgO Manganese Mn Manganese Oxide MnO Molybdenum Mo
K15 Molybdenum Carbide MoC2 Molybdenum Oxide MoO3 Molybdenum Disulfide MoS2 Neodymium Nd
K16 Nickel Ni Nickel Chromium NiCr
K17 Nickel Iron NiFe Nickel Oxide NiO Nickel Vanadium NiV Niobium Nb
K18 Niobium Carbide NbC Niobium Nitride NbN Niobium Oxide Nb2O5 Palladium Pd Permalloy Ni/Fe/Mo/Mn
K19 Platinum Pt Platinum Cobalt PtCo Platinum Gadolinium PtGd Platinum Lanthanum PtLa Platinum Scandium PtSc Platinum Yttrium PtY
K20 Praseodymium Pr Rhenium Re Rhodium Rh Ruthenium Ru Samarium Sm
K21 Selenium Se Silicon Si Undoped Silicon Si N-type Silicon Si P-type Samarium Sm
K22 Silicon Dioxide SiO2 Silicon Monoxide SiO Silicon Nitride Si3N4 Silver Ag Silver Titanium AgTi
K23 Strontium Sr Strontium Titanate SrTiO3 Tantalum Ta Tantalum Carbide TaC Tantalum Nitride TaN
Page
K24 Tantalum Oxide Ta2O5 Tantalum Silicide TaSi2 Tellerium Te Terbium Tb Tin Sn
K25 Tin Oxide SnO2 Titanium Ti Titanium Boride TiB2 Titanium Carbide TiC
K26 Titanium Monoxide TiO Titanium Disilicide TiSi2 Titanium Dioxide TiO2 Titanium Nitrie TiN
K27 Tungsten W Tungsten Carbide WC Tungsten Oxide WO3 Tungsten Disilicide WSi2 Tungsten Disulfide WS2
K28 Tungsten Titanium WTi Vanadium V Vanadium Carbide VC Vanadium Oxide V2O5 Ytterbium Yb
K29 Ytterbium Oxide Yb2O3 Yttrium Y Yttrium Oxide Y2O3 Zinc Zn
K30 Zinc Oxide ZnO Zinc Selenide ZnSe Zinc Sulfide ZnS Zinc Telluride ZnTe
K31 Zirconium Zr Zirconium Carbide ZrC Zirconium Nitride ZrN Zirconium Oxide ZrO2
Backing Plates & Bonding K32
Circular Backing Plates Linear Backing Plates
K33 Indium Bonding
K34 Elastomer Bonding
K35 Nanofoil Bonding
Materials Reclaim Service
K36 Precious Metal Reclaim
De
po
sition
Ma
teria
ls
K1 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Aluminium Al
1.00” (25.4) 3 99.99
MT-AL25X3-4N 1.00” (25.4) 6 99.99 MT-AL25X6-4N 1.00” (25.4) 3 99.999 MT-AL25X3-5N 1.00” (25.4) 6 99.999 MT-AL25X6-5N 1.00” (25.4) 3 99.9999 MT-AL25X3-6N 1.00” (25.4) 6 99.9999 MT-AL25X6-6N 2.00” (50.8) 3 99.99 MT-AL51X3-4N 2.00” (50.8) 6 99.99 MT-AL51X6-4N 2.00” (50.8) 3 99.999 MT-AL51X3-5N 2.00” (50.8) 6 99.999 MT-AL51X6-5N 2.00” (50.8) 3 99.9999 MT-AL51X3-6N 2.00” (50.8) 6 99.9999 MT-AL51X6-6N 3.00” (76.2) 3 99.99 MT-AL76X3-4N 3.00” (76.2) 6 99.99 MT-AL76X6-4N 3.00” (76.2) 3 99.999 MT-AL76X3-5N 3.00” (76.2) 6 99.999 MT-AL76X6-5N 3.00” (76.2) 3 99.9999 MT-AL76X3-6N 3.00” (76.2) 6 99.9999 MT-AL76X6-6N 4”, 6” & 8” available
Aluminium Copper AlCu
1.00” (25.4) 3 99.999
99-Al/1-Cu, wt%
MT-ALCU25X3-5N 1.00” (25.4) 6 99.999 MT-ALCU25X6-5N 2.00” (50.8) 3 99.999 MT-ALCU51X3-5N 2.00” (50.8) 6 99.999 MT-ALCU51X6-5N 3.00” (76.2) 3 99.999 MT-ALCU76X3-5N 3.00” (76.2) 6 99.999 MT-ALCU76X6-5N 4”, 6” & 8” available
Aluminium Nitride AlN
1.00” (25.4) 3 99.8
Bonding Advised
MT-ALN25X3-2N8 1.00” (25.4) 6 99.8 MT-ALN25X6-2N8 2.00” (50.8) 3 99.8 MT-ALN51X3-2N8 2.00” (50.8) 6 99.8 MT-ALN51X6-2N8 3.00” (76.2) 3 99.8 MT-ALN76X3-2N8 3.00” (76.2) 6 99.8 MT-ALN76X6-2N8 4” available
De
po
sition
Ma
teria
ls
K2 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Aluminium Oxide Al2O3
1.00” (25.4) 3 99.99
Bonding Advised
MT-AL2O325X3-4N 1.00” (25.4) 6 99.99 MT-AL2O325X6-4N 2.00” (50.8) 3 99.99 MT-AL2O351X3-4N 2.00” (50.8) 6 99.99 MT-AL2O351X6-4N 3.00” (76.2) 3 99.99 MT-AL2O376X3-4N 3.00” (76.2) 6 99.99 MT-AL2O376X6-4N 4”, 6” & 8” available
Antimony Sb
1.00” (25.4) 3 99.999
Some Porosity
MT-SB25X3-5N 1.00” (25.4) 6 99.999 MT-SB25X6-5N 2.00” (50.8) 3 99.999 MT-SB51X3-5N 2.00” (50.8) 6 99.999 MT-SB51X6-5N 3.00” (76.2) 3 99.999 MT-SB76X3-5N 3.00” (76.2) 6 99.999 MT-SB76X6-5N 4” available
Barium Ba
1.00” (25.4) 3 99.5
Oil Packed
MT-BA25X3-2N5 1.00” (25.4) 6 99.5 MT-BA25X6-2N5 2.00” (50.8) 3 99.5 MT-BA51X3-2N5 2.00” (50.8) 6 99.5 MT-BA51X6-2N5 3.00” (76.2) 3 99.5 MT-BA76X3-2N5 3.00” (76.2) 6 99.5 MT-BA76X6-2N5 4” and 6” available
Barium Titanate BaTiO3
1.00” (25.4) 3 99.9
Bonding Advised
MT-BATIO325X3-3N 1.00” (25.4) 6 99.9 MT-BATIO325X6-3N 2.00” (50.8) 3 99.9 MT-BATIO351X3-3N 2.00” (50.8) 6 99.9 MT-BATIO351X6-3N 3.00” (76.2) 3 99.9 MT-BATIO376X3-3N 3.00” (76.2) 6 99.9 MT-BATIO376X6-3N 4” available
Barium Fluoride BaF
1.00” (25.4) 3 99.9
Bonding Advised
MT-BAF25X3-3N 1.00” (25.4) 6 99.9 MT-BAF25X6-3N 2.00” (50.8) 3 99.9 MT-BAF51X3-3N 2.00” (50.8) 6 99.9 MT-BAF51X6-3N 3.00” (76.2) 3 99.9 MT-BAF76X3-3N 3.00” (76.2) 6 99.9 MT-BAF76X6-3N 4” available
De
po
sition
Ma
teria
ls
K3 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Barium Oxide BaO
1.00” (25.4) 3 99.9
Bonding Advised
MT-BAO25X3-3N 1.00” (25.4) 6 99.9 MT-BAO25X6-3N 2.00” (50.8) 3 99.9 MT-BAO51X3-3N 2.00” (50.8) 6 99.9 MT-BAO51X6-3N 3.00” (76.2) 3 99.9 MT-BAO76X3-3N 3.00” (76.2) 6 99.9 MT-BAO76X6-3N 4”, 6” & 8” available
Barium Strontium Titanate BaSrTiO3
1.00” (25.4) 3 99.9
Ba0.5/Sr0.5
Bonding Advised
MT-BASRTIO325X3-3N 1.00” (25.4) 6 99.9 MT-BASRTIO325X6-3N 2.00” (50.8) 3 99.9 MT-BASRTIO351X3-3N 2.00” (50.8) 6 99.9 MT-BASRTIO351X6-3N 3.00” (76.2) 3 99.9 MT-BASRTIO376X3-3N 3.00” (76.2) 6 99.9 MT-BASRTIO376X6-3N 4” available
Bismuth Bi
1.00” (25.4) 3 99.9
Some Porosity
Bonding Advised for 3” and above
MT-BI25X3-3N 1.00” (25.4) 6 99.9 MT-BI25X6-3N 1.00” (25.4) 3 99.99 MT-BI25X3-4N 1.00” (25.4) 6 99.99 MT-BI25X6-4N 1.00” (25.4) 3 99.999 MT-BI25X3-5N 1.00” (25.4) 6 99.999 MT-BI25X6-5N 2.00” (50.8) 3 99.9 MT-BI51X3-3N 2.00” (50.8) 6 99.9 MT-BI51X6-3N 2.00” (50.8) 3 99.99 MT-BI51X3-4N 2.00” (50.8) 6 99.99 MT-BI51X6-4N 2.00” (50.8) 3 99.999 MT-BI51X3-5N 2.00” (50.8) 6 99.999 MT-BI51X6-5N 3.00” (76.2) 3 99.9 MT-BI76X3-3N 3.00” (76.2) 6 99.9 MT-BI76X6-3N 3.00” (76.2) 3 99.99 MT-BI76X3-4N 3.00” (76.2) 6 99.99 MT-BI76X6-4N 3.00” (76.2) 3 99.999 MT-BI76X3-5N 3.00” (76.2) 6 99.999 MT-BI76X6-5N 4” available
Bismuth Oxide Bi2O3
1.00” (25.4) 3 99.99
Bonding Advised
MT-BI2O325X3-4N 1.00” (25.4) 6 99.99 MT-BI2O325X6-4N 2.00” (50.8) 3 99.99 MT-BI2O351X3-4N 2.00” (50.8) 6 99.99 MT-BI2O351X6-4N 3.00” (76.2) 3 99.99 MT-BI2O376X3-4N 3.00” (76.2) 6 99.99 MT-BI2O376X6-4N 4” and 6” available
De
po
sition
Ma
teria
ls
K4 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Bismuth Selenide Bi2Se3
1.00” (25.4) 3 99.999
Bonding Advised
MT-BI2SE325X3-5N 1.00” (25.4) 6 99.999 MT-BI2SE325X6-5N 2.00” (50.8) 3 99.999 MT-BI2SE351X3-5N 2.00” (50.8) 6 99.999 MT-BI2SE351X6-5N 3.00” (76.2) 3 99.999 MT-BI2SE376X3-5N 3.00” (76.2) 6 99.999 MT-BI2SE376X6-5N 4” available
Bismuth Titanate Bi4Ti3O12
1.00” (25.4) 3 99.9
Bonding Advised
MT-BITIO25X3-3N 1.00” (25.4) 6 99.9 MT-BITIO25X6-3N 2.00” (50.8) 3 99.9 MT-BITIO51X3-3N 2.00” (50.8) 6 99.9 MT-BITIO51X6-3N 3.00” (76.2) 3 99.9 MT-BITIO76X3-3N 3.00” (76.2) 6 99.9 MT-BITIO76X6-3N 4” available
Boron B
1.00” (25.4) 3 99.9
Bonding Advised
MT-B25X3-3N 1.00” (25.4) 6 99.9 MT-B25X6-3N 2.00” (50.8) 3 99.9 MT-B51X3-3N 2.00” (50.8) 6 99.9 MT-B51X6-3N 3.00” (76.2) 3 99.9 MT-B76X3-3N 3.00” (76.2) 6 99.9 MT-B76X6-3N 4”, 6” and 8” available
Boron Nitride BN
1.00” (25.4) 3 99.99
Bonding Advised
MT-BN25X3-4N 1.00” (25.4) 6 99.99 MT-BN25X6-4N 2.00” (50.8) 3 99.99 MT-BN51X3-4N 2.00” (50.8) 6 99.99 MT-BN51X6-4N 3.00” (76.2) 3 99.99 MT-BN76X3-4N 3.00” (76.2) 6 99.99 MT-BN76X6-4N 4”, 6” and 8” available
Boron Carbide B4C
1.00” (25.4) 3 99.5+
Bonding Advised
MT-B4C25X3-2N5 1.00” (25.4) 6 99.5+ MT-B4C25X6-2N5 2.00” (50.8) 3 99.5+ MT-B4C51X3-2N5 2.00” (50.8) 6 99.5+ MT-B4C51X6-2N5 3.00” (76.2) 3 99.5+ MT-B4C76X3-2N5 3.00” (76.2) 6 99.5+ MT-B4C76X6-2N5 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K5 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Cadmium Cd
1.00” (25.4) 3 99.999
Some Porosity
MT-CD25X3-5N 1.00” (25.4) 6 99.999 MT-CD25X6-5N 2.00” (50.8) 3 99.999 MT-CD51X3-5N 2.00” (50.8) 6 99.999 MT-CD51X6-5N 3.00” (76.2) 3 99.999 MT-CD76X3-5N 3.00” (76.2) 6 99.999 MT-CD76X6-5N 4” and 6” available
Cadmium Selenide CdSe
1.00” (25.4) 3 99.99
Bonding Advised
MT-CDSE25X3-4N 1.00” (25.4) 6 99.99 MT-CDSE25X6-4N 2.00” (50.8) 3 99.99 MT-CDSE51X3-4N 2.00” (50.8) 6 99.99 MT-CDSE51X6-4N 3.00” (76.2) 3 99.99 MT-CDSE76X3-4N 3.00” (76.2) 6 99.99 MT-CDSE76X6-4N 4” available
Cadmium Sulfide CdS
1.00” (25.4) 3 99.99
Bonding Advised
MT-CDS25X3-4N 1.00” (25.4) 6 99.99 MT-CDS25X6-4N 2.00” (50.8) 3 99.99 MT-CDS51X3-4N 2.00” (50.8) 6 99.99 MT-CDS51X6-4N 3.00” (76.2) 3 99.99 MT-CDS76X3-4N 3.00” (76.2) 6 99.99 MT-CDS76X6-4N 4” available
Cadmium Telluride CdTe
1.00” (25.4) 3 99.999
Bonding Advised
MT-CDTE25X3-5N 1.00” (25.4) 6 99.999 MT-CDTE25X6-5N 2.00” (50.8) 3 99.999 MT-CDTE51X3-5N 2.00” (50.8) 6 99.999 MT-CDTE51X6-5N 3.00” (76.2) 3 99.999 MT-CDTE76X3-5N 3.00” (76.2) 6 99.999 MT-CDTE76X6-5N 4” available
Carbon C
1.00” (25.4) 3 99.999
(Graphite)
Bonding Advised
MT-C25X3-5N 1.00” (25.4) 6 99.999 MT-C25X6-5N 2.00” (50.8) 3 99.999 MT-C51X3-5N 2.00” (50.8) 6 99.999 MT-C51X6-5N 3.00” (76.2) 3 99.999 MT-C76X3-5N 3.00” (76.2) 6 99.999 MT-C76X6-5N 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K6 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Cerium Ce
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-CE25X3-3N 1.00” (25.4) 6 99.9 TREM MT-CE25X6-3N 2.00” (50.8) 3 99.9 TREM MT-CE51X3-3N 2.00” (50.8) 6 99.9 TREM MT-CE51X6-3N 3.00” (76.2) 3 99.9 TREM MT-CE76X3-3N 3.00” (76.2) 6 99.9 TREM MT-CE76X6-3N 4” available
Cerium Fluoride CeF3
1.00” (25.4) 3 99.99
Bonding Advised
MT-CEF325X3-4N 1.00” (25.4) 6 99.99 MT-CEF325X6-4N 2.00” (50.8) 3 99.99 MT-CEF351X3-4N 2.00” (50.8) 6 99.99 MT-CEF351X6-4N 3.00” (76.2) 3 99.99 MT-CEF376X3-4N 3.00” (76.2) 6 99.99 MT-CEF376X6-4N 4”, 6” and 8” available
Cerium Oxide CeO2
1.00” (25.4) 3 99.99
Bonding Advised
MT-CEO225X3-4N 1.00” (25.4) 6 99.99 MT-CEO225X6-4N 2.00” (50.8) 3 99.99 MT-CEO251X3-4N 2.00” (50.8) 6 99.99 MT-CEO251X6-4N 3.00” (76.2) 3 99.99 MT-CEO276X3-4N 3.00” (76.2) 6 99.99 MT-CEO276X6-4N 4” available
Chromium Cr
1.00” (25.4) 0.5 99.99
Magnetic
MT-CR25X05-4N 1.00” (25.4) 1 99.99 MT-CR25X1-4N 1.00” (25.4) 2 99.99 MT-CR25X2-4N 1.00” (25.4) 3 99.99 MT-CR25X3-4N 2.00” (50.8) 0.5 99.99 MT-CR51X05-4N 2.00” (50.8) 1 99.99 MT-CR51X1-4N 2.00” (50.8) 2 99.99 MT-CR51X2-4N 2.00” (50.8) 3 99.99 MT-CR51X3-4N 3.00” (76.2) 0.5 99.99 MT-CR76X05-4N 3.00” (76.2) 1 99.99 MT-CR76X1-4N 3.00” (76.2) 2 99.99 MT-CR76X2-4N 3.00” (76.2) 3 99.99 MT-CR76X3-4N 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K7 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Chromium Oxide Cr2O3
1.00” (25.4) 3 99.9
Bonding Advised
MT-CR2O325X3-3N 1.00” (25.4) 6 99.9 MT-CR2O325X6-3N 2.00” (50.8) 3 99.9 MT-CR2O351X3-3N 2.00” (50.8) 6 99.9 MT-CR2O351X6-3N 3.00” (76.2) 3 99.9 MT-CR2O376X3-3N 3.00” (76.2) 6 99.9 MT-CR2O376X6-3N 4” available
Cobalt Co
1.00” (25.4) 0.5 99.95
Magnetic
MT-CO25X05-3N5 1.00” (25.4) 1 99.95 MT-CO25X1-3N5 1.00” (25.4) 2 99.95 MT-CO25X2-3N5 1.00” (25.4) 3 99.95 MT-CO25X3-3N5 2.00” (50.8) 0.5 99.95 MT-CO51X05-3N5 2.00” (50.8) 1 99.95 MT-CO51X1-3N5 2.00” (50.8) 2 99.95 MT-CO51X2-3N5 2.00” (50.8) 3 99.95 MT-CO51X3-3N5 3.00” (76.2) 0.5 99.95 MT-CO76X05-3N5 3.00” (76.2) 1 99.95 MT-CO76X1-3N5 3.00” (76.2) 2 99.95 MT-CO76X2-3N5 3.00” (76.2) 3 99.95 MT-CO76X3-3N5 4”, 6” and 8” available
Cobalt Oxide CoO
1.00” (25.4) 3 99.9
Bonding Advised
MT-CEO225X3-3N 1.00” (25.4) 6 99.9 MT-CEO225X6-3N 2.00” (50.8) 3 99.9 MT-CEO251X3-3N 2.00” (50.8) 6 99.9 MT-CEO251X6-3N 3.00” (76.2) 3 99.9 MT-CEO276X3-3N 3.00” (76.2) 6 99.9 MT-CEO276X6-3N 4” available
Copper Cu
1.00” (25.4) 3 99.99
MT-CU25X3-4N 1.00” (25.4) 6 99.99 MT-CU25X6-4N 1.00” (25.4) 3 99.999 MT-CU25X3-5N 1.00” (25.4) 6 99.999 MT-CU25X6-5N 2.00” (50.8) 3 99.99 MT-CU51X3-4N 2.00” (50.8) 6 99.99 MT-CU51X6-4N 2.00” (50.8) 3 99.999 MT-CU51X3-5N 2.00” (50.8) 6 99.999 MT-CU51X6-5N 3.00” (76.2) 3 99.99 MT-CU76X3-4N 3.00” (76.2) 6 99.99 MT-CU76X6-4N 3.00” (76.2) 3 99.999 MT-CU76X3-5N 3.00” (76.2) 6 99.999 MT-CU76X6-5N 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K8 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Copper Oxide CuO
1.00” (25.4) 3 99.9
Bonding Advised
MT-CUO25X3-3N 1.00” (25.4) 6 99.9 MT-CUO25X6-3N 2.00” (50.8) 3 99.9 MT-CUO51X3-3N 2.00” (50.8) 6 99.9 MT-CUO51X6-3N 3.00” (76.2) 3 99.9 MT-CUO76X3-3N 3.00” (76.2) 6 99.9 MT-CUO76X6-3N 4” available
Dysprosium Dy
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-DY25X2-3N 1.00” (25.4) 6 99.9 TREM MT-DY25X3-3N 2.00” (50.8) 3 99.9 TREM MT-DY51X2-3N 2.00” (50.8) 6 99.9 TREM MT-DY51X3-3N 3.00” (76.2) 3 99.9 TREM MT-DY76X2-3N 3.00” (76.2) 6 99.9 TREM MT-DY76X3-3N 4” available
Erbium Er
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-ER25X3-3N 1.00” (25.4) 6 99.9 TREM MT-ER25X6-3N 2.00” (50.8) 3 99.9 TREM MT-ER51X3-3N 2.00” (50.8) 6 99.9 TREM MT-ER51X6-3N 3.00” (76.2) 3 99.9 TREM MT-ER76X3-3N 3.00” (76.2) 6 99.9 TREM MT-ER76X6-3N 4” available
Europium Eu
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-EU25X3-3N 1.00” (25.4) 6 99.9 TREM MT-EU25X6-3N 2.00” (50.8) 3 99.9 TREM MT-EU51X3-3N 2.00” (50.8) 6 99.9 TREM MT-EU51X6-3N 3.00” (76.2) 3 99.9 TREM MT-EU76X3-3N 3.00” (76.2) 6 99.9 TREM MT-EU76X6-3N 4”, 6” and 8” available
Gadolinium Gd
1.00” (25.4) 3 99.9 TREM
Magnetic
Oil Packed
MT-GD25X3-3N 1.00” (25.4) 6 99.9 TREM MT-GD25X6-3N 2.00” (50.8) 3 99.9 TREM MT-GD51X3-3N 2.00” (50.8) 6 99.9 TREM MT-GD51X6-3N 3.00” (76.2) 3 99.9 TREM MT-GD76X3-3N 3.00” (76.2) 6 99.9 TREM MT-GD76X6-3N 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K9 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Germanium Ge
1.00” (25.4) 3 99.999
Bonding Advised
MT-GE25X3-5N 1.00” (25.4) 6 99.999 MT-GE25X6-5N 2.00” (50.8) 3 99.999 MT-GE51X3-5N 2.00” (50.8) 6 99.999 MT-GE51X6-5N 3.00” (76.2) 3 99.999 MT-GE76X3-5N 3.00” (76.2) 6 99.999 MT-GE76X6-5N 4” available
Gold Au
1.00” (25.4) 0.5 99.99
Bonding of larger/thinner targets advised
Reclaim Service
MT-AU25X05-4N 1.00” (25.4) 1 99.99 MT-AU25X1-4N 1.00” (25.4) 2 99.99 MT-AU25X2-4N 1.00” (25.4) 3 99.99 MT-AU25X3-4N 1.00” (25.4) 6 99.99 MT-AU25X6-4N 2.00” (50.8) 0.5 99.99 MT-AU51X05-4N 2.00” (50.8) 1 99.99 MT-AU51X1-4N 2.00” (50.8) 2 99.99 MT-AU51X2-4N 2.00” (50.8) 3 99.99 MT-AU51X3-4N 2.00” (50.8) 6 99.99 MT-AU51X6-4N 3.00” (76.2) 0.5 99.99 MT-AU76X05-4N 3.00” (76.2) 1 99.99 MT-AU76X1-4N 3.00” (76.2) 2 99.99 MT-AU76X2-4N 3.00” (76.2) 3 99.99 MT-AU76X3-4N 3.00” (76.2) 6 99.99 MT-AU76X6-4N 4”, 6” and 8” available
Hafnium Hf
1.00” (25.4) 3 99.9
MT-HF25X3-3N 1.00” (25.4) 6 99.9 MT-HF25X6-3N 2.00” (50.8) 3 99.9 MT-HF51X3-3N 2.00” (50.8) 6 99.9 MT-HF51X6-3N 3.00” (76.2) 3 99.9 MT-HF76X3-3N 3.00” (76.2) 6 99.9 MT-HF76X6-3N 4”, 6” and 8” available
Hafnium Carbide HfC
1.00” (25.4) 3 99.5
Bonding Advised
MT-HFC25X3-2N5 1.00” (25.4) 6 99.5 MT-HFC25X6-2N5 2.00” (50.8) 3 99.5 MT-HFC51X3-2N5 2.00” (50.8) 6 99.5 MT-HFC51X6-2N5 3.00” (76.2) 3 99.5 MT-HFC76X3-2N5 3.00” (76.2) 6 99.5 MT-HFC76X6-2N5 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K10 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Hafnium Nitride HfN
1.00” (25.4) 3 99.5
Bonding Advised
MT-HFN25X3-2N5 1.00” (25.4) 6 99.5 MT-HFN25X6-2N5 2.00” (50.8) 3 99.5 MT-HFN51X3-2N5 2.00” (50.8) 6 99.5 MT-HFN51X6-2N5 3.00” (76.2) 3 99.5 MT-HFN76X3-2N5 3.00” (76.2) 6 99.5 MT-HFN76X6-2N5 4”, 6” and 8” available
Hafnium Oxide HfO2
1.00” (25.4) 3 99.95
Bonding Advised
MT-HFO225X3-3N5 1.00” (25.4) 6 99.95 MT-HFO225X6-3N5 2.00” (50.8) 3 99.95 MT-HFO251X3-3N5 2.00” (50.8) 6 99.95 MT-HFO251X6-3N5 3.00” (76.2) 3 99.95 MT-HFO276X3-3N5 3.00” (76.2) 6 99.95 MT-HFO276X6-3N5 4”, 6” and 8” available
Holmium Ho
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-HO25X3-3N 1.00” (25.4) 6 99.9 TREM MT-HO25X6-3N 2.00” (50.8) 3 99.9 TREM MT-HO51X3-3N 2.00” (50.8) 6 99.9 TREM MT-HO51X6-3N 3.00” (76.2) 3 99.9 TREM MT-HO76X3-3N 3.00” (76.2) 6 99.9 TREM MT-HO76X6-3N 4” available
Indium In
1.00” (25.4) 3 99.99
Reclaim Service
MT-IN25X3-4N 1.00” (25.4) 6 99.99 MT-IN25X6-4N 1.00” (25.4) 3 99.999 MT-IN25X3-5N 1.00” (25.4) 6 99.999 MT-IN25X6-5N 2.00” (50.8) 3 99.99 MT-IN51X3-4N 2.00” (50.8) 6 99.99 MT-IN51X6-4N 2.00” (50.8) 3 99.999 MT-IN51X3-5N 2.00” (50.8) 6 99.999 MT-IN51X6-5N 3.00” (76.2) 3 99.99 MT-IN76X3-4N 3.00” (76.2) 6 99.99 MT-IN76X6-4N 3.00” (76.2) 3 99.999 MT-IN76X3-5N 3.00” (76.2) 6 99.999 MT-IN76X6-5N 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K11 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Indium Oxide In2O3
1.00” (25.4) 3 99.99
Bonding Advised
MT-IN2O325X3-4N 1.00” (25.4) 6 99.99 MT-IN2O325X6-4N 2.00” (50.8) 3 99.99 MT-IN2O351X3-4N 2.00” (50.8) 6 99.99 MT-IN2O351X6-4N 3.00” (76.2) 3 99.99 MT-IN2O376X3-4N 3.00” (76.2) 6 99.99 MT-IN2O376X6-4N 4”, 6” and 8” available
Indium Tin Oxide ITO
1.00” (25.4) 3 99.99
In2O3/SnO2, 90/10 wt%
Bonding Advised
MT-ITO25X3-4N 1.00” (25.4) 6 99.99 MT-ITO25X6-4N 2.00” (50.8) 3 99.99 MT-ITO51X3-4N 2.00” (50.8) 6 99.99 MT-ITO51X6-4N 3.00” (76.2) 3 99.99 MT-ITO76X3-4N 3.00” (76.2) 6 99.99 MT-ITO76X6-4N 4”, 6” and 8” available
Iridium Ir
1.00” (25.4) 3 99.9
Some Porosity
Reclaim Service
MT-IR25X3-3N 1.00” (25.4) 6 99.9 MT-IR25X6-3N 2.00” (50.8) 3 99.9 MT-IR51X3-3N 2.00” (50.8) 6 99.9 MT-IR51X6-3N 3.00” (76.2) 3 99.9 MT-IR76X3-3N 3.00” (76.2) 6 99.9 MT-IR76X6-3N 4” available
Iron Fe
1.00” (25.4) 0.5 99.99
Magnetic
MT-FE25X05-4N 1.00” (25.4) 1 99.99 MT-FE25X1-4N 1.00” (25.4) 2 99.99 MT-FE25X1-4N 1.00” (25.4) 3 99.99 MT-FE25X1-4N 2.00” (50.8) 0.5 99.99 MT-FE51X05-4N 2.00” (50.8) 1 99.99 MT-FE51X1-4N 2.00” (50.8) 2 99.99 MT-FE51X1-4N 2.00” (50.8) 3 99.99 MT-FE51X3-4N 3.00” (76.2) 0.5 99.99 MT-FE76X05-4N 3.00” (76.2) 1 99.99 MT-FE76X1-4N 3.00” (76.2) 2 99.99 MT-FE76X2-4N 3.00” (76.2) 3 99.99 MT-FE76X3-4N 4” and 6” available
De
po
sition
Ma
teria
ls
K12 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Iron Oxide Fe2O3
1.00” (25.4) 3 99.99
Bonding Advised
MT-FE2O325X3-4N 1.00” (25.4) 6 99.99 MT-FE2O325X6-4N 2.00” (50.8) 3 99.99 MT-FE2O351X3-4N 2.00” (50.8) 6 99.99 MT-FE2O351X6-4N 3.00” (76.2) 3 99.99 MT-FE2O376X3-4N 3.00” (76.2) 6 99.99 MT-FE2O376X6-4N 4” available
Lanthanum La
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-LA25X3-3N 1.00” (25.4) 6 99.9 TREM MT-LA25X6-3N 2.00” (50.8) 3 99.9 TREM MT-LA51X3-3N 2.00” (50.8) 6 99.9 TREM MT-LA51X6-3N 3.00” (76.2) 3 99.9 TREM MT-LA76X3-3N 3.00” (76.2) 6 99.9 TREM MT-LA76X6-3N 4” available
Lanthanum Aluminate LaAlO3
1.00” (25.4) 3 99.9
Bonding Advised
MT-LAALO325X3-3N 1.00” (25.4) 6 99.9 MT-LAALO325X6-3N 2.00” (50.8) 3 99.9 MT-LAALO351X3-3N 2.00” (50.8) 6 99.9 MT-LAALO351X6-3N 3.00” (76.2) 3 99.9 MT-LAALO376X3-3N 3.00” (76.2) 6 99.9 MT-LAALO376X6-3N 4” available
Lanthanum Oxide La2O3
1.00” (25.4) 3 99.99
Bonding Advised*
MT-LA2O325X3-4N 1.00” (25.4) 6 99.99 MT-LA2O325X6-4N 2.00” (50.8) 3 99.99 MT-LA2O351X3-4N 2.00” (50.8) 6 99.99 MT-LA2O351X6-4N 3.00” (76.2) 3 99.99 MT-LA2O376X3-4N 3.00” (76.2) 6 99.99 MT-LA2O376X6-4N 4” available
*not guaranteed subject to fabrication constraints 1.0
Lead Pb
1.00” (25.4) 3 99.99+
Some Porosity
MT-PB25X3-4N+ 1.00” (25.4) 6 99.99+ MT-PB25X6-4N+ 2.00” (50.8) 3 99.99+ MT-PB51X3-4N+ 2.00” (50.8) 6 99.99+ MT-PB51X6-4N+ 3.00” (76.2) 3 99.99+ MT-PB76X3-4N+ 3.00” (76.2) 6 99.99+ MT-PB76X6-4N+ 4” available
De
po
sition
Ma
teria
ls
K13 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Lead Telluride PbTe
1.00” (25.4) 3 99.99
Bonding Advised
MT-PBTE25X3-4N 1.00” (25.4) 6 99.99 MT-PBTE25X6-4N 2.00” (50.8) 3 99.99 MT-PBTE51X3-4N 2.00” (50.8) 6 99.99 MT-PBTE51X6-4N 3.00” (76.2) 3 99.99 MT-PBTE76X3-4N 3.00” (76.2) 6 99.99 MT-PBTE76X6-4N 4”, 6” and 8” available
Lead Titanate PbTiO3
1.00” (25.4) 3 99.9
Bonding Advised
MT-PBTIO325X3-3N 1.00” (25.4) 6 99.9 MT-PBTIO325X6-3N 2.00” (50.8) 3 99.9 MT-PBTIO351X3-3N 2.00” (50.8) 6 99.9 MT-PBTIO351X6-3N 3.00” (76.2) 3 99.9 MT-PBTIO376X3-3N 3.00” (76.2) 6 99.9 MT-PBTIO376X6-3N 4” available
Lead Zirconate PbZrO3
1.00” (25.4) 3 99.5+
Bonding Advised
MT-PBZRO325X3-2N5+ 1.00” (25.4) 6 99.5+ MT-PBZRO325X6-2N5+ 2.00” (50.8) 3 99.5+ MT-PBZRO351X3-2N5+ 2.00” (50.8) 6 99.5+ MT-PBZRO351X6-2N5+ 3.00” (76.2) 3 99.5+ MT-PBZRO376X3-2N5+ 3.00” (76.2) 6 99.5+ MT-PBZRO376X6-2N5+ 4” available
Lead Zirconate Titanate PZT
1.00” (25.4) 3 99.99
PbZr1-xTixO3
Bonding Advised
MT-PZT25X3-3N 1.00” (25.4) 6 99.99 MT-PZT25X6-3N 2.00” (50.8) 3 99.99 MT-PZT51X3-3N 2.00” (50.8) 6 99.99 MT-PZT51X6-3N 3.00” (76.2) 3 99.99 MT-PZT76X3-3N 3.00” (76.2) 6 99.99 MT-PZT76X6-3N 4” available
1
Magnesium Mg
1.00” (25.4) 3 99.95
MT-MG25X1-3N5 1.00” (25.4) 6 99.95 MT-MG25X1-3N5 2.00” (50.8) 3 99.95 MT-MG51X1-3N5 2.00” (50.8) 6 99.95 MT-MG51X3-3N5 3.00” (76.2) 3 99.95 MT-MG76X2-3N5 3.00” (76.2) 6 99.95 MT-MG76X3-3N5 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K14 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Magnesium Fluoride MgF2
1.00” (25.4) 3 99.9
Bonding Advised
MT-MGF225X3-3N 1.00” (25.4) 6 99.9 MT-MGF225X6-3N 2.00” (50.8) 3 99.9 MT-MGF251X3-3N 2.00” (50.8) 6 99.9 MT-MGF251X6-3N 3.00” (76.2) 3 99.9 MT-MGF276X3-3N 3.00” (76.2) 6 99.9 MT-MGF276X6-3N 4”, 6” and 8” available
Magnesium Oxide MgO
1.00” (25.4) 3 99.5
Bonding Advised
MT-MGO25X3-2N5 1.00” (25.4) 6 99.5 MT-MGO25X6-2N5 2.00” (50.8) 3 99.5 MT-MGO51X3-2N5 2.00” (50.8) 6 99.5 MT-MGO51X6-2N5 3.00” (76.2) 3 99.5 MT-MGO76X3-2N5 3.00” (76.2) 6 99.5 MT-MGO76X6-2N5 4”, 6” and 8” available
Manganese Mn
1.00” (25.4) 3 99.95
Bonding Advised
MT-MN25X3-3N5 1.00” (25.4) 6 99.95 MT-MN25X6-3N5 2.00” (50.8) 3 99.95 MT-MN51X3-3N5 2.00” (50.8) 6 99.95 MT-MN51X6-3N5 3.00” (76.2) 3 99.95 MT-MN76X3-3N5 3.00” (76.2) 6 99.95 MT-MN76X6-3N5 4”, 6” and 8” available
Manganese Oxide MnO
1.00” (25.4) 3 99.99
Bonding Advised
MT-MNO25X3-3N 1.00” (25.4) 6 99.99 MT-MNO25X6-3N 2.00” (50.8) 3 99.99 MT-MNO51X3-3N 2.00” (50.8) 6 99.99 MT-MNO51X6-3N 3.00” (76.2) 3 99.99 MT-MNO76X3-3N 3.00” (76.2) 6 99.99 MT-MNO76X6-3N 4”, 6” and 8” available
1
Molybdenum Mo
1.00” (25.4) 3 99.95
MT-MO25X1-3N5 1.00” (25.4) 6 99.95 MT-MO25X1-3N5 2.00” (50.8) 3 99.95 MT-MO51X1-3N5 2.00” (50.8) 6 99.95 MT-MO51X3-3N5 3.00” (76.2) 3 99.95 MT-MO76X2-3N5 3.00” (76.2) 6 99.95 MT-MO76X3-3N5 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K15 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Molybdenum Carbide MoC2
1.00” (25.4) 3 99.5
Bonding Advised
MT-MOC225X3-2N5 1.00” (25.4) 6 99.5 MT-MOC225X6-2N5 2.00” (50.8) 3 99.5 MT-MOC251X3-2N5 2.00” (50.8) 6 99.5 MT-MOC251X6-2N5 3.00” (76.2) 3 99.5 MT-MOC276X3-2N5 3.00” (76.2) 6 99.5 MT-MOC276X6-2N5 4” available
Molybdenum Oxide MoO3
1.00” (25.4) 3 99.9
Bonding Advised
MT-MOO325X3-3N 1.00” (25.4) 6 99.9 MT-MOO325X6-3N 2.00” (50.8) 3 99.9 MT-MOO351X3-3N 2.00” (50.8) 6 99.9 MT-MOO351X6-3N 3.00” (76.2) 3 99.9 MT-MOO376X3-3N 3.00” (76.2) 6 99.9 MT-MOO376X6-3N 4”, 6” and 8” available
Molybdenum Disulfide MoS2
1.00” (25.4) 3 99.9
Bonding Advised
MT-MOS225X3-3N 1.00” (25.4) 6 99.9 MT-MOS225X6-3N 2.00” (50.8) 3 99.9 MT-MOS251X3-3N 2.00” (50.8) 6 99.9 MT-MOS251X6-3N 3.00” (76.2) 3 99.9 MT-MOS276X3-3N 3.00” (76.2) 6 99.9 MT-MOS276X6-3N 4” available
Neodymium Nd
1.00” (25.4) 3 99.9
Oil Packed
MT-ND25X3-3N 1.00” (25.4) 6 99.9 MT-ND25X6-3N 2.00” (50.8) 3 99.9 MT-ND51X3-3N 2.00” (50.8) 6 99.9 MT-ND51X6-3N 3.00” (76.2) 3 99.9 MT-ND76X3-3N 3.00” (76.2) 6 99.9 MT-ND76X6-3N 4” available
1
De
po
sition
Ma
teria
ls
K16 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Nickel Ni
1.00” (25.4) 0.5 99.9
Magnetic
MT-NI25X05-3N 1.00” (25.4) 1 99.9 MT-NI25X1-3N 1.00” (25.4) 2 99.9 MT-NI25X2-3N 1.00” (25.4) 3 99.9 MT-NI25X3-3N 1.00” (25.4) 0.5 99.99 MT-NI25X05-4N 1.00” (25.4) 1 99.99 MT-NI25X1-4N 1.00” (25.4) 2 99.99 MT-NI25X2-4N 1.00” (25.4) 3 99.99 MT-NI25X3-4N 2.00” (50.8) 0.5 99.9 MT-NI51X05-3N 2.00” (50.8) 1 99.9 MT-NI51X1-3N 2.00” (50.8) 2 99.9 MT-NI51X2-3N 2.00” (50.8) 3 99.9 MT-NI51X3-3N 2.00” (50.8) 0.5 99.99 MT-NI51X05-4N 2.00” (50.8) 1 99.99 MT-NI51X1-4N 2.00” (50.8) 2 99.99 MT-NI51X2-4N 2.00” (50.8) 3 99.99 MT-NI51X3-4N 3.00” (76.2) 0.5 99.9 MT-NI76X05-3N 3.00” (76.2) 1 99.9 MT-NI76X1-3N 3.00” (76.2) 2 99.9 MT-NI76X2-3N 3.00” (76.2) 3 99.9 MT-NI76X3-3N 3.00” (76.2) 0.5 99.99 MT-NI76X05-4N 3.00” (76.2) 1 99.99 MT-NI76X1-4N 3.00” (76.2) 2 99.99 MT-NI76X2-4N 3.00” (76.2) 3 99.99 MT-NI76X3-4N 4”, 6” and 8” available
Nickel Chromium NiCr
1.00” (25.4) 0.5 99.9
Ni80/Cr20 wt%
Magnetic
MT-NICR25X05-3N 1.00” (25.4) 1 99.9 MT-NICR25X1-3N 1.00” (25.4) 2 99.9 MT-NICR25X2-3N 1.00” (25.4) 3 99.9 MT-NICR25X3-3N 2.00” (50.8) 0.5 99.9 MT-NICR51X05-3N 2.00” (50.8) 1 99.9 MT-NICR51X1-3N 2.00” (50.8) 2 99.9 MT-NICR51X2-3N 2.00” (50.8) 3 99.9 MT-NICR51X3-3N 3.00” (76.2) 0.5 99.9 MT-NICR76X05-3N 3.00” (76.2) 1 99.9 MT-NICR76X1-3N 3.00” (76.2) 2 99.9 MT-NICR76X2-3N 3.00” (76.2) 3 99.9 MT-NICR76X3-3N 4” available
1.00”
De
po
sition
Ma
teria
ls
K17 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Nickel Iron NiFe
1.00” (25.4) 0.5 99.95
Ni81/Fe19 wt%
Magnetic
MT-NIFE25X05-3N5 1.00” (25.4) 1 99.95 MT-NIFE25X1-3N5 1.00” (25.4) 2 99.95 MT-NIFE25X2-3N5 1.00” (25.4) 3 99.95 MT-NIFE25X3-3N5 2.00” (50.8) 0.5 99.95 MT-NIFE51X05-3N5 2.00” (50.8) 1 99.95 MT-NIFE51X1-3N5 2.00” (50.8) 2 99.95 MT-NIFE51X2-3N5 2.00” (50.8) 3 99.95 MT-NIFE51X3-3N5 3.00” (76.2) 0.5 99.95 MT-NIFE76X05-3N5 3.00” (76.2) 1 99.95 MT-NIFE76X1-3N5 3.00” (76.2) 2 99.95 MT-NIFE76X2-3N5 3.00” (76.2) 3 99.95 MT-NIFE76X3-3N5 4” available
Nickel Oxide NiO
1.00” (25.4) 3 99.99
Bonding Advised
MT-NIO25X3-4N 1.00” (25.4) 6 99.99 MT-NIO25X6-4N 2.00” (50.8) 3 99.99 MT-NIO51X3-4N 2.00” (50.8) 6 99.99 MT-NIO51X6-4N 3.00” (76.2) 3 99.99 MT-NIO76X3-4N 3.00” (76.2) 6 99.99 MT-NIO76X6-4N 4” available
Nickel Vanadium NiV
1.00” (25.4) 3 99.95
Ni93/V7 wt%
MT-NIV25X3-3N5 1.00” (25.4) 6 99.95 MT-NIV25X6-3N5 2.00” (50.8) 3 99.95 MT-NIV51X3-3N5 2.00” (50.8) 6 99.95 MT-NIV51X6-3N5 3.00” (76.2) 3 99.95 MT-NIV76X3-3N5 3.00” (76.2) 6 99.95 MT-NIV76X6-3N5 4”, 6” and 8” available
Niobium Nb
1.00” (25.4) 3 99.95
MT-NB25X3-3N5 1.00” (25.4) 6 99.95 MT-NB25X6-3N5 2.00” (50.8) 3 99.95 MT-NB51X3-3N5 2.00” (50.8) 6 99.95 MT-NB51X6-3N5 3.00” (76.2) 3 99.95 MT-NB76X3-3N5 3.00” (76.2) 6 99.95 MT-NB76X6-3N5 4”, 6” and 8” available
1.00
De
po
sition
Ma
teria
ls
K18 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Niobium Carbide NbC
1.00” (25.4) 3 99.5
Bonding Advised
MT-NBC25X3-2N5 1.00” (25.4) 6 99.5 MT-NBC25X6-2N5 2.00” (50.8) 3 99.5 MT-NBC51X3-2N5 2.00” (50.8) 6 99.5 MT-NBC51X6-2N5 3.00” (76.2) 3 99.5 MT-NBC76X3-2N5 3.00” (76.2) 6 99.5 MT-NBC76X6-2N5 4” available
Niobium Nitride NbN
1.00” (25.4) 3 99.5
Bonding Advised
MT-NBN25X3-2N5 1.00” (25.4) 6 99.5 MT-NBN25X6-2N5 2.00” (50.8) 3 99.5 MT-NBN51X3-2N5 2.00” (50.8) 6 99.5 MT-NBN51X6-2N5 3.00” (76.2) 3 99.5 MT-NBN76X3-2N5 3.00” (76.2) 6 99.5 MT-NBN76X6-2N5 4” available
Niobium Oxide Nb2O5
1.00” (25.4) 3 99.995
Bonding Advised
MT-NB2O525X3-4N5 1.00” (25.4) 6 99.995 MT-NB2O525X6-4N5 2.00” (50.8) 3 99.995 MT-NB2O551X3-4N5 2.00” (50.8) 6 99.995 MT-NB2O551X6-4N5 3.00” (76.2) 3 99.995 MT-NB2O576X3-4N5 3.00” (76.2) 6 99.995 MT-NB2O576X6-4N5 4” available
Palladium Pd
1.00” (25.4) 3 99.99
Reclaim Avaliable
MT-PD25X3-4N 1.00” (25.4) 6 99.99 MT-PD25X6-4N 2.00” (50.8) 3 99.99 MT-PD51X3-4N 2.00” (50.8) 6 99.99 MT-PD51X6-4N 3.00” (76.2) 3 99.99 MT-PD76X3-4N 3.00” (76.2) 6 99.99 MT-PD76X6-4N 4”, 6” and 8” available
1.0
Permalloy Ni/Fe/Mo/Mn
1.00” (25.4) 1 -
Ni79/Fe16.7/Mo4/Mn0.3 wt%
Magnetic
MT-PERM25X1-X 1.00” (25.4) 2 - MT-PERM25X2-X 1.00” (25.4) 3 - MT-PERM25X3-X 2.00” (50.8) 1 - MT-PERM51X1-X 2.00” (50.8) 2 - MT-PERM51X2-X 2.00” (50.8) 3 - MT-PERM51X3-X 3.00” (76.2) 1 - MT-PERM76X1-X 3.00” (76.2) 2 - MT-PERM76X2-X 3.00” (76.2) 3 - MT-PERM76X3-X 4” available
De
po
sition
Ma
teria
ls
K19 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Platinum Pt
1.00” (25.4) 1 99.99
Reclaim Available
MT-PT25X1-4N 1.00” (25.4) 2 99.99 MT-PT25X2-4N 1.00” (25.4) 3 99.99 MT-PT25X3-4N 1.00” (25.4) 6 99.99 MT-PT25X6-4N 2.00” (50.8) 1 99.99 MT-PT51X1-4N 2.00” (50.8) 2 99.99 MT-PT51X2-4N 2.00” (50.8) 3 99.99 MT-PT51X3-4N 2.00” (50.8) 6 99.99 MT-PT51X6-4N 3.00” (76.2) 1 99.99 MT-PT76X1-4N 3.00” (76.2) 2 99.99 MT-PT76X2-4N 3.00” (76.2) 3 99.99 MT-PT76X3-4N 3.00” (76.2) 6 99.99 MT-PT76X6-4N 4”, 6” and 8” available
Platinum Cobalt PtCo
1.00” (25.4) 3 99.95 Pt50/Co50 at%
Reclaim Available
MT-PTCO25X3-3N5 2.00” (50.8) 3 99.95 MT-PTCO51X3-3N5 3.00” (76.2) 3 99.95 MT-PTCO76X3-3N5 4” available
Platinum Gadolinium PtGd
1.00” (25.4) 3 99.9 Pt83/Gd17 at%
Bonding Advised Reclaim Available
MT-PTGD51X3-3N 2.00” (50.8) 3 99.9 MT-PTGD51X3-3N 3.00” (76.2) 3 99.9 MT-PTGD76X3-3N 4” available
Platinum Lanthanum PtLa 1.00” (25.4) 3 99.9
Pt83/La17 at% Bonding Advised Reclaim Avaliable
MT-PTLA25X3-3N 2.00” (50.8) 3 99.9 MT-PTLA51X3-3N 3.00” (76.2) 3 99.9 MT-PTLA76X3-3N 4” available
1.0
Platinum Scandium PtSc
1.00” (25.4) 3 99.9 Pt83/Sc17 at%
Bonding Advised Reclaim Avaliable
MT-PTSC25X1-3N 2.00” (50.8) 3 99.9 MT-PTSC51X1-3N 3.00” (76.2) 3 99.9 MT-PTSC76X1-3N 4” available
Platinum Yttrium PtY
1.00” (25.4) 1 99.9 Pt75/Y25 at%
Bonding Advised Reclaim Avaliable
MT-PTY25X1-3N 2.00” (50.8) 1 99.9 MT-PTY51X1-3N 3.00” (76.2) 1 99.9 MT-PTY76X1-3N 4” available
De
po
sition
Ma
teria
ls
K20 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Praseodymium Pr
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-PR25X3-3N 1.00” (25.4) 6 99.9 TREM MT-PR25X6-3N 2.00” (50.8) 3 99.9 TREM MT-PR51X3-3N 2.00” (50.8) 6 99.9 TREM MT-PR51X6-3N 3.00” (76.2) 3 99.9 TREM MT-PR76X3-3N 3.00” (76.2) 6 99.9 TREM MT-PR76X6-3N 4”, 6” and 8” available
Rhenium Re
1.00” (25.4) 3 99.99
Reclaim Available
MT-RE25X3-4N 1.00” (25.4) 6 99.99 MT-RE25X6-4N 2.00” (50.8) 3 99.99 MT-RE51X3-4N 2.00” (50.8) 6 99.99 MT-RE51X6-4N 3.00” (76.2) 3 99.99 MT-RE76X3-4N 3.00” (76.2) 6 99.99 MT-RE76X6-4N 4” available
Rhodium Rh
1.00” (25.4) 2 99.8+
Reclaim Available
MT-RH25X2-2N8+ 1.00” (25.4) 3 99.8+ MT-RH25X3-2N8+ 1.00” (25.4) 6 99.8+ MT-RH25X6-2N8+ 2.00” (50.8) 2 99.8+ MT-RH51X2-2N8+ 2.00” (50.8) 3 99.8+ MT-RH51X3-2N8+ 2.00” (50.8) 6 99.8+ MT-RH51X6-2N8+ 3.00” (76.2) 2 99.8+ MT-RH76X2-2N8+ 3.00” (76.2) 3 99.8+ MT-RH76X3-2N8+ 3.00” (76.2) 6 99.8+ MT-RH76X6-2N8+ 4” available
Ruthenium Ru
1.00” (25.4) 3 99.95
Reclaim Avaliable
MT-RU25X3-2N5 1.00” (25.4) 6 99.95 MT-RU25X6-3N5 2.00” (50.8) 3 99.95 MT-RU51X3-3N5 2.00” (50.8 6 99.95 MT-RU51X6-3N5 3.00” (76.2) 3 99.95 MT-RU76X3-3N5 3.00” (76.2) 6 99.95 MT-RU76X6-3N5 4” available
1
Samarium Sm
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-SM25X3-3N 1.00” (25.4) 6 99.9 TREM MT-SM25X6-3N 2.00” (50.8) 3 99.9 TREM MT-SM51X3-3N 2.00” (50.8) 6 99.9 TREM MT-SM51X6-3N 3.00” (76.2) 3 99.9 TREM MT-SM76X3-3N 3.00” (76.2) 6 99.9 TREM MT-SM76X6-3N 4” available
De
po
sition
Ma
teria
ls
K21 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Selenium Se
1.00” (25.4) 3 99.999
Some Porisity
Bonding Advised
MT-SE25X3-5N 1.00” (25.4) 6 99.999 MT-SE25X6-5N 2.00” (50.8) 3 99.999 MT-SE51X3-5N 2.00” (50.8) 6 99.999 MT-SE51X6-5N 3.00” (76.2) 3 99.999 MT-SE76X3-5N 3.00” (76.2) 6 99.999 MT-SE76X6-5N 4” available
Silicon Si Undoped
1.00” (25.4) 3 99.999
MT-SI25X3-5N 1.00” (25.4) 6 99.999 MT-SI25X6-5N 2.00” (50.8) 3 99.999 MT-SI51X3-5N 2.00” (50.8) 6 99.999 MT-SI51X6-5N 3.00” (76.2) 3 99.999 MT-SI76X3-5N 3.00” (76.2) 6 99.999 MT-SI76X6-5N 4”, 6” and 8” available
Silicon Si N-type
1.00” (25.4) 3 99.999
<0.1 Ohm/cm resistivity
MT-SI(n)25X3-5N 1.00” (25.4) 6 99.999 MT-SI(n)25X6-5N 2.00” (50.8) 3 99.999 MT-SI(n)51X3-5N 2.00” (50.8) 6 99.999 MT-SI(n)51X6-5N 3.00” (76.2) 3 99.999 MT-SI(n)76X3-5N 3.00” (76.2) 6 99.999 MT-SI(n)76X6-5N 4”, 6” and 8” available
Silicon Si P-type
1.00” (25.4) 3 99.999
<0.005-0.020 Ohm/cm resistivity
MT-SI(p)25X3-5N 1.00” (25.4) 6 99.999 MT-SI(p)25X6-5N 2.00” (50.8) 3 99.999 MT-SI(p)51X3-5N 2.00” (50.8 6 99.999 MT-SI(p)51X6-5N 3.00” (76.2) 3 99.999 MT-SI(p)76X3-5N 3.00” (76.2) 6 99.999 MT-SI(p)76X6-5N 4” available
1
Samarium Sm
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-SM25X3-3N 1.00” (25.4) 6 99.9 TREM MT-SM25X6-3N 2.00” (50.8) 3 99.9 TREM MT-SM51X3-3N 2.00” (50.8) 6 99.9 TREM MT-SM51X6-3N 3.00” (76.2) 3 99.9 TREM MT-SM76X3-3N 3.00” (76.2) 6 99.9 TREM MT-SM76X6-3N 4” available
De
po
sition
Ma
teria
ls
K22 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Silicon Dioxide SiO2
1.00” (25.4) 3 99.995
Bonding Advised
MT-SIO225X3-2N5 1.00” (25.4) 6 99.995 MT-SIO225X6-2N5 2.00” (50.8) 3 99.995 MT-SIO251X3-2N5 2.00” (50.8) 6 99.995 MT-SIO251X6-2N5 3.00” (76.2) 3 99.995 MT-SIO276X3-2N5 3.00” (76.2) 6 99.995 MT-SIO276X6-2N5 4”, 6” and 8” available
Silicon Monoxide SiO
1.00” (25.4) 3 99.9
Bonding Advised
MT-SIO25X3-3N 1.00” (25.4) 6 99.9 MT-SIO25X6-3N 2.00” (50.8) 3 99.9 MT-SIO51X3-3N 2.00” (50.8) 6 99.9 MT-SIO51X6-3N 3.00” (76.2) 3 99.9 MT-SIO76X3-3N 3.00” (76.2) 6 99.9 MT-SIO76X6-3N 4”, 6” and 8” available
Silicon Nitride Si3N4
1.00” (25.4) 3 99.9
Bonding Advised
MT-SI3N425X3-3N 1.00” (25.4) 6 99.9 MT-SI3N425X6-3N 2.00” (50.8) 3 99.9 MT-SI3N451X3-3N 2.00” (50.8) 6 99.9 MT-SI3N451X6-3N 3.00” (76.2) 3 99.9 MT-SI3N476X3-3N 3.00” (76.2) 6 99.9 MT-SI3N476X6-3N 4”, 6” and 8” available
Silver Ag
1.00” (25.4) 3 99.99
Reclaim Available
MT-AG25X3-4N 1.00” (25.4) 6 99.99 MT-AG25X6-4N 2.00” (50.8) 3 99.99 MT-AG51X3-4N 2.00” (50.8 6 99.99 MT-AG51X6-4N 3.00” (76.2) 3 99.99 MT-AG76X3-4N 3.00” (76.2) 6 99.99 MT-AG76X6-4N 4” available
1
Silver Titanium AgTi
1.00” (25.4) 3 99.99 Ag80/Ti20 at%
Reclaim Available
MT-AGTI25X3-4N 1.00” (25.4) 6 99.99 MT-AGTI25X6-4N 2.00” (50.8) 3 99.99 MT-AGTI51X3-4N 2.00” (50.8) 6 99.99 MT-AGTI51X6-4N 3.00” (76.2) 3 99.99 MT-AGTI76X3-4N 3.00” (76.2) 6 99.99 MT-AGTI76X6-4N 4” available
De
po
sition
Ma
teria
ls
K23 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Strontium Sr
1.00” (25.4) 3 98.0
Oil Packed
MT-SR25X3-1N8 1.00” (25.4) 6 98.0 MT-SR25X6-1N8 2.00” (50.8) 3 98.0 MT-SR51X3-1N8 2.00” (50.8) 6 98.0 MT-SR51X6-1N8 3.00” (76.2) 3 98.0 MT-SR76X3-1N8 3.00” (76.2) 6 98.0 MT-SR76X6-1N8 4” available
Strontium Titanate SrTiO3
1.00” (25.4) 3 99.9
Bonding Advised
MT-SRTIO325X3-3N 1.00” (25.4) 6 99.9 MT-SRTIO325X6-3N 2.00” (50.8) 3 99.9 MT-SRTIO351X3-3N 2.00” (50.8) 6 99.9 MT-SRTIO351X6-3N 3.00” (76.2) 3 99.9 MT-SRTIO376X3-3N 3.00” (76.2) 6 99.9 MT-SRTIO376X6-3N 4” available
Tantalum Ta
1.00” (25.4) 3 99.99
Reclaim Available
MT-TA25X3-4N 1.00” (25.4) 6 99.99 MT-TA25X6-4N 2.00” (50.8) 3 99.99 MT-TA51X3-4N 2.00” (50.8) 6 99.99 MT-TA51X6-4N 3.00” (76.2) 3 99.99 MT-TA76X3-4N 3.00” (76.2) 6 99.99 MT-TA76X6-4N 4”, 6” and 8” available
Tantalum Carbide TaC
1.00” (25.4) 3 99.5
Bonding Advised
MT-TAC25X3-2N5 1.00” (25.4) 6 99.5 MT-TAC25X6-2N5 2.00” (50.8) 3 99.5 MT-TAC51X3-2N5 2.00” (50.8 6 99.5 MT-TAC51X6-2N5 3.00” (76.2) 3 99.5 MT-TAC76X3-2N5 3.00” (76.2) 6 99.5 MT-TAC76X6-2N5 4”, 6: and 8” available
1
Tantalum Nitride TaN
1.00” (25.4) 3 99.5
Bonding Advised
MT-TAN25X3-2N5 1.00” (25.4) 6 99.5 MT-TAN25X6-2N5 2.00” (50.8) 3 99.5 MT-TAN51X3-2N5 2.00” (50.8) 6 99.5 MT-TAN51X6-2N5 3.00” (76.2) 3 99.5 MT-TAN76X3-2N5 3.00” (76.2) 6 99.5 MT-TAN76X6-2N5 4” available
De
po
sition
Ma
teria
ls
K24 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Tantalum Oxide Ta2O5
1.00” (25.4) 3 99.99
Bonding Advised
MT-TA2O525X3-4N 1.00” (25.4) 6 99.99 MT-TA2O525X6-4N 2.00” (50.8) 3 99.99 MT-TA2O551X3-4N 2.00” (50.8) 6 99.99 MT-TA2O551X6-4N 3.00” (76.2) 3 99.99 MT-TA2O576X3-4N 3.00” (76.2) 6 99.99 MT-TA2O576X6-4N 4” available
Tantalum Silicide TaSi2
1.00” (25.4) 3 99.5
Bonding Advised
MT-TASI225X3-2N5 1.00” (25.4) 6 99.5 MT-TASI225X6-2N5 2.00” (50.8) 3 99.5 MT-TASI251X3-2N5 2.00” (50.8) 6 99.5 MT-TASI251X6-2N5 3.00” (76.2) 3 99.5 MT-TASI276X3-2N5 3.00” (76.2) 6 99.5 MT-TASI276X6-2N5 4” available
Tellurium Te
1.00” (25.4) 3 99.999
Some Porosity
MT-TE25X3-5N 1.00” (25.4) 6 99.999 MT-TE25X6-5N 2.00” (50.8) 3 99.999 MT-TE51X3-5N 2.00” (50.8) 6 99.999 MT-TE51X6-5N 3.00” (76.2) 3 99.999 MT-TE76X3-5N 3.00” (76.2) 6 99.999 MT-TE76X6-5N 4” available
Terbium Tb
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-TB25X3-3N 1.00” (25.4) 6 99.9 TREM MT-TB25X6-3N 2.00” (50.8) 3 99.9 TREM MT-TB51X3-3N 2.00” (50.8 6 99.9 TREM MT-TB51X6-3N 3.00” (76.2) 3 99.9 TREM MT-TB76X3-3N 3.00” (76.2) 6 99.9 TREM MT-TB76X6-3N 4” available
1
Tin Sn
1.00” (25.4) 3 99.999
MT-TAN25X3-5N 1.00” (25.4) 6 99.999 MT-TAN25X6-5N 2.00” (50.8) 3 99.999 MT-TAN51X3-5N 2.00” (50.8) 6 99.999 MT-TAN51X6-5N 3.00” (76.2) 3 99.999 MT-TAN76X3-5N 3.00” (76.2) 6 99.999 MT-TAN76X6-5N 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K25 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Tin Oxide SnO2
1.00” (25.4) 3 99.99
Bonding Advised
MT-SNO225X3-4N 1.00” (25.4) 6 99.99 MT-SNO225X6-4N 2.00” (50.8) 3 99.99 MT-SNO251X3-4N 2.00” (50.8) 6 99.99 MT-SNO251X6-4N 3.00” (76.2) 3 99.99 MT-SNO276X3-4N 3.00” (76.2) 6 99.99 MT-SNO276X6-4N 4” available
Titanium Ti
1.00” (25.4) 3 99.99
MT-TI25X3-4N 1.00” (25.4) 6 99.99 MT-TI25X6-4N 1.00” (25.4) 3 99.995 MT-TI25X3-4N5 1.00” (25.4) 6 99.995 MT-TI25X6-4N5 2.00” (50.8) 3 99.99 MT-TI51X3-4N 2.00” (50.8) 6 99.99 MT-TI51X6-4N 2.00” (50.8) 3 99.995 MT-TI51X3-4N5 2.00” (50.8) 6 99.995 MT-TI51X6-4N5 3.00” (76.2) 3 99.99 MT-TI76X3-4N 3.00” (76.2) 6 99.99 MT-TI76X6-4N 3.00” (76.2) 3 99.995 MT-TI76X3-4N5 3.00” (76.2) 6 99.995 MT-TI76X6-4N5 4”, 6” and 8” available
Titanium Boride TiB2
1.00” (25.4) 3 99.5
Bonding Advised
MT-TIB225X3-5N 1.00” (25.4) 6 99.5 MT-TIB225X6-5N 2.00” (50.8) 3 99.5 MT-TIB251X3-5N 2.00” (50.8) 6 99.5 MT-TIB251X6-5N 3.00” (76.2) 3 99.5 MT-TIB276X3-5N 3.00” (76.2) 6 99.5 MT-TIB276X6-5N 4” available
Titanium Carbide TiC
1.00” (25.4) 3 99.5
Bonding Advised
MT-TIC25X3-2N5 1.00” (25.4) 6 99.5 MT-TIC25X6-2N5 2.00” (50.8) 3 99.5 MT-TIC51X3-2N5 2.00” (50.8 6 99.5 MT-TIC51X6-2N5 3.00” (76.2) 3 99.5 MT-TIC76X3-2N5 3.00” (76.2) 6 99.5 MT-TIC76X6-2N5 4” available
1
De
po
sition
Ma
teria
ls
K26 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Titanium Monoxide TiO
1.00” (25.4) 3 99.9
Bonding Advised
MT-TIO25X3-3N 1.00” (25.4) 6 99.9 MT-TIO25X6-3N 2.00” (50.8) 3 99.9 MT-TIO51X3-3N 2.00” (50.8) 6 99.9 MT-TIO51X6-3N 3.00” (76.2) 3 99.9 MT-TIO76X3-3N 3.00” (76.2) 6 99.9 MT-TIO76X6-3N 4”, 6” and 8” available
Titanium Disilicide TiSi2
1.00” (25.4) 3 99.5
Bonding Advised
MT-TI25X3-2N5 1.00” (25.4) 6 99.5 MT-TI25X6-2N5 2.00” (50.8) 3 99.5 MT-TI51X3-2N5 2.00” (50.8) 6 99.5 MT-TI51X6-2N5 3.00” (76.2) 3 99.5 MT-TI76X3-2N5 3.00” (76.2) 6 99.5 MT-TI76X6-2N5 4”, 6” and 8” available
Titanium Dioxide TiO2
1.00” (25.4) 3 99.9
Bonding Advised
MT-TIO225X3-3N 1.00” (25.4) 6 99.9 MT-TIO225X6-3N 1.00” (25.4) 3 99.99 MT-TIO225X3-4N 1.00” (25.4) 6 99.99 MT-TIO225X6-4N 2.00” (50.8) 3 99.9 MT-TIO251X3-3N 2.00” (50.8) 6 99.9 MT-TIO251X6-3N 2.00” (50.8) 3 99.99 MT-TIO251X3-4N 2.00” (50.8) 6 99.99 MT-TIO251X6-4N 3.00” (76.2) 3 99.9 MT-TIO276X3-3N 3.00” (76.2) 6 99.9 MT-TIO276X6-3N 3.00” (76.2) 3 99.99 MT-TIO276X3-4N 3.00” (76.2) 6 99.99 MT-TIO276X6-4N 4” and 6” available
Titanium Nitride TiN
1.00” (25.4) 3 99.5
Bonding Advised
MT-TIN25X3-2N5 1.00” (25.4) 6 99.5 MT-TIN25X6-2N5 2.00” (50.8) 3 99.5 MT-TIN51X3-2N5 2.00” (50.8 6 99.5 MT-TIN51X6-2N5 3.00” (76.2) 3 99.5 MT-TIN76X3-2N5 3.00” (76.2) 6 99.5 MT-TIN76X6-2N5 4” available
1.00
De
po
sition
Ma
teria
ls
K27 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Tungsten W
1.00” (25.4) 3 99.95
MT-W25X3-3N5 1.00” (25.4) 6 99.95 MT-W25X6-3N5 2.00” (50.8) 3 99.95 MT-W51X3-3N5 2.00” (50.8) 6 99.95 MT-W51X6-3N5 3.00” (76.2) 3 99.95 MT-W76X3-3N5 3.00” (76.2) 6 99.95 MT-W76X6-3N5 4”, 6” and 8” available
Tungsten Carbide WC
1.00” (25.4) 3 99.5
Bonding Advised
MT-WC25X3-2N5 1.00” (25.4) 6 99.5 MT-WC25X6-2N5 2.00” (50.8) 3 99.5 MT-WC51X3-2N5 2.00” (50.8) 6 99.5 MT-WC51X6-2N5 3.00” (76.2) 3 99.5 MT-WC76X3-2N5 3.00” (76.2) 6 99.5 MT-WC76X6-2N5 4” available
Tungsten Oxide WO3
1.00” (25.4) 3 99.9
Bonding Advised
MT-WO325X3-3N 1.00” (25.4) 6 99.9 MT-WO325X6-3N 2.00” (50.8) 3 99.9 MT-WO351X3-3N 2.00” (50.8) 6 99.9 MT-WO351X6-3N 3.00” (76.2) 3 99.9 MT-WO376X3-3N 3.00” (76.2) 6 99.9 MT-WO376X6-3N 4” available
Tungsten Disilicide WSi2
1.00” (25.4) 3 99.95
Bonding Advised
MT-WSI225X3-3N5 1.00” (25.4) 6 99.95 MT-WSI225X6-3N5 2.00” (50.8) 3 99.95 MT-WSI251X3-3N5 2.00” (50.8 6 99.95 MT-WSI251X6-3N5 3.00” (76.2) 3 99.95 MT-WSI276X3-3N5 3.00” (76.2) 6 99.95 MT-WSI276X6-3N5 4”, 6” and 8” available
1
Tungsten Disulfide WS2
1.00” (25.4) 3 99.8
Bonding Advised
MT-WS225X3-2N8 1.00” (25.4) 6 99.8 MT-WS225X6-2N8 2.00” (50.8) 3 99.8 MT-WS251X3-2N8 2.00” (50.8 6 99.8 MT-WS251X6-2N8 3.00” (76.2) 3 99.8 MT-WS276X3-2N8 3.00” (76.2) 6 99.8 MT-WS276X6-2N8 4” available
De
po
sition
Ma
teria
ls
K28 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Tungsten Titanium WTi
1.00” (25.4) 3 99.99
W90/Ti10 wt%
MT-W25X3-4N 1.00” (25.4) 6 99.99 MT-W25X6-4N 2.00” (50.8) 3 99.99 MT-W51X3-4N 2.00” (50.8) 6 99.99 MT-W51X6-4N 3.00” (76.2) 3 99.99 MT-W76X3-4N 3.00” (76.2) 6 99.99 MT-W76X6-4N 4”, 6” and 8” available
Vanadium V
1.00” (25.4) 3 99.5
MT-V25X3-2N5 1.00” (25.4) 6 99.5 MT-V25X6-2N5 2.00” (50.8) 3 99.5 MT-V51X3-2N5 2.00” (50.8) 6 99.5 MT-V51X6-2N5 3.00” (76.2) 3 99.5 MT-V76X3-2N5 3.00” (76.2) 6 99.5 MT-V76X6-2N5 4” available
Vanadium Carbide VC
1.00” (25.4) 3 99.5
Bonding Advised
MT-VC25X3-2N5 1.00” (25.4) 6 99.5 MT-VC25X6-2N5 2.00” (50.8) 3 99.5 MT-VC51X3-2N5 2.00” (50.8) 6 99.5 MT-VC51X6-2N5 3.00” (76.2) 3 99.5 MT-VC76X3-2N5 3.00” (76.2) 6 99.5 MT-VC76X6-2N5 4” available
Vanadium Oxide V2O5
1.00” (25.4) 3 99.5
Bonding Advised
MT-V2O525X3-2N5 1.00” (25.4) 6 99.5 MT-V2O525X6-2N5 2.00” (50.8) 3 99.5 MT-V2O551X3-2N5 2.00” (50.8 6 99.5 MT-V2O551X6-2N5 3.00” (76.2) 3 99.5 MT-V2O576X3-2N5 3.00” (76.2) 6 99.5 MT-V2O576X6-2N5 4”, 6” and 8” available
1
Ytterbium Yb
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-YB25X3-3N 1.00” (25.4) 6 99.9 TREM MT-YB25X6-3N 2.00” (50.8) 3 99.9 TREM MT-YB51X3-3N 2.00” (50.8 6 99.9 TREM MT-YB51X6-3N 3.00” (76.2) 3 99.9 TREM MT-YB76X3-3N 3.00” (76.2) 6 99.9 TREM MT-YB76X6-3N 4” available
De
po
sition
Ma
teria
ls
K29 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Ytterbium Oxide Yb2O3
1.00” (25.4) 3 99.9
Bonding Advised
MT-YB2O325X3-3N 1.00” (25.4) 6 99.9 MT-YB2O325X6-3N 2.00” (50.8) 3 99.9 MT-YB2O351X3-3N 2.00” (50.8) 6 99.9 MT-YB2O351X6-3N 3.00” (76.2) 3 99.9 MT-YB2O376X3-3N 3.00” (76.2) 6 99.9 MT-YB2O376X6-3N 4” available
Yttrium Y
1.00” (25.4) 3 99.9 TREM
Oil Packed
MT-Y25X3-3N 1.00” (25.4) 6 99.9 TREM MT-Y25X6-3N 2.00” (50.8) 3 99.9 TREM MT-Y51X3-3N 2.00” (50.8) 6 99.9 TREM MT-Y51X6-3N 3.00” (76.2) 3 99.9 TREM MT-Y76X3-3N 3.00” (76.2) 6 99.9 TREM MT-Y76X6-3N 4” available
Yttrium Oxide Y2O3
1.00” (25.4) 3 99.99
Bonding Advised
MT-Y2O325X3-4N 1.00” (25.4) 6 99.99 MT-Y2O325X6-4N 2.00” (50.8) 3 99.99 MT-Y2O351X3-4N 2.00” (50.8) 6 99.99 MT-Y2O351X6-4N 3.00” (76.2) 3 99.99 MT-Y2O376X3-4N 3.00” (76.2) 6 99.99 MT-Y2O376X6-4N 4” available
Zinc Zn
1.00” (25.4) 3 99.99
MT-ZN25X3-4N 1.00” (25.4) 6 99.99 MT-ZN25X6-4N 1.00” (25.4) 3 99.995 MT-ZN25X3-4N5 1.00” (25.4) 6 99.995 MT-ZN25X6-4N5 2.00” (50.8) 3 99.99 MT-ZN51X3-4N 2.00” (50.8 6 99.99 MT-ZN51X6-4N 2.00” (50.8 3 99.995 MT-ZN51X3-4N5 2.00” (50.8 6 99.995 MT-ZN51X6-4N5 3.00” (76.2) 3 99.99 MT-ZN76X3-4N 3.00” (76.2) 6 99.99 MT-ZN76X6-4N 3.00” (76.2) 3 99.995 MT-ZN76X3-4N5 3.00” (76.2) 6 99.995 MT-ZN76X6-4N5 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K30 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Zinc Oxide ZnO
1.00” (25.4) 3 99.99
Bonding Advised
MT-ZNO25X3-4N 1.00” (25.4) 6 99.99 MT-ZNO25X6-4N 1.00” (25.4) 3 99.999 MT-ZNO25X3-5N 1.00” (25.4) 6 99.999 MT-ZNO25X6-5N 2.00” (50.8) 3 99.99 MT-ZNO51X3-4N 2.00” (50.8) 6 99.99 MT-ZNO51X6-4N 2.00” (50.8) 3 99.999 MT-ZNO51X3-5N 2.00” (50.8) 6 99.999 MT-ZNO51X6-5N 3.00” (76.2) 3 99.99 MT-ZNO76X3-4N 3.00” (76.2) 6 99.99 MT-ZNO76X6-4N 3.00” (76.2) 3 99.999 MT-ZNO76X3-5N 3.00” (76.2) 6 99.999 MT-ZNO76X6-5N 4”, 6” and 8” available
Zinc Selenide ZnSe
1.00” (25.4) 3 99.995
Bonding Advised
MT-ZNSE25X3-4N5 1.00” (25.4) 6 99.995 MT-ZNSE25X6-4N5 2.00” (50.8) 3 99.995 MT-ZNSE51X3-4N5 2.00” (50.8) 6 99.995 MT-ZNSE51X6-4N5 3.00” (76.2) 3 99.995 MT-ZNSE76X3-4N5 3.00” (76.2) 6 99.995 MT-ZNSE76X6-4N5 4” available
Zinc Sulfide ZnS
1.00” (25.4) 3 99.9
Bonding Advised
MT-ZNS25X3-3N 1.00” (25.4) 6 99.9 MT-ZNS25X6-3N 1.00” (25.4) 3 99.99 MT-ZNS25X3-4N 1.00” (25.4) 6 99.99 MT-ZNS25X6-4N 2.00” (50.8) 3 99.9 MT-ZNS51X3-3N 2.00” (50.8) 6 99.9 MT-ZNS51X6-3N 2.00” (50.8) 3 99.99 MT-ZNS51X3-4N 2.00” (50.8) 6 99.99 MT-ZNS51X6-4N 3.00” (76.2) 3 99.9 MT-ZNS76X3-3N 3.00” (76.2) 6 99.9 MT-ZNS76X6-3N 3.00” (76.2) 3 99.99 MT-ZNS76X3-4N 3.00” (76.2) 6 99.99 MT-ZNS76X6-4N 4” available
Zinc Telluride ZnTe
1.00” (25.4) 3 99.99
Bonding Advised
MT-ZNTE25X3-4N 1.00” (25.4) 6 99.99 MT-ZNTE25X6-4N 2.00” (50.8 3 99.99 MT-ZNTE51X3-4N 2.00” (50.8 6 99.99 MT-ZNTE51X6-4N 3.00” (76.2) 3 99.99 MT-ZNTE76X3-4N 3.00” (76.2) 6 99.99 MT-ZNTE76X6-4N 4”, 6” and 8” available
De
po
sition
Ma
teria
ls
K31 Deposition Materials
Sputter Targets | Circular
Common standard specification targets from stock Comprehensive range of target sizes available Non standard dimensions and purities fabricated by request Custom compounds by weight or atomic percentage fabricated by request Target Bonding Service available Subject to size, thickness and material composition, and all oxides/nitrides - bonding is advised Material Reclaim Service available for Precious Metals
Standard specifications
Material Dia (mm) Thick (mm) Purity % Notes Part Code
Zirconium Zr
1.00” (25.4) 3 99.9
MT-ZR25X3-3N 1.00” (25.4) 6 99.9 MT-ZR25X6-3N 2.00” (50.8) 3 99.9 MT-ZR51X3-3N 2.00” (50.8) 6 99.9 MT-ZR51X6-3N 3.00” (76.2) 3 99.9 MT-ZR76X3-3N 3.00” (76.2) 6 99.9 MT-ZR76X6-3N 4”, 6” and 8” available
Zirconium Carbide ZrC
1.00” (25.4) 3 99.5
Bonding Advised
MT-ZRC25X3-2N5 1.00” (25.4) 6 99.5 MT-ZRC25X6-2N5 2.00” (50.8) 3 99.5 MT-ZRC51X3-2N5 2.00” (50.8) 6 99.5 MT-ZRC51X6-2N5 3.00” (76.2) 3 99.5 MT-ZRC76X3-2N5 3.00” (76.2) 6 99.5 MT-ZRC76X6-2N5 4” available
Zirconium Nitride ZrN
1.00” (25.4) 3 99.5
Bonding Advised
MT-ZNS25X3-2N5 1.00” (25.4) 6 99.5 MT-ZNS25X6-2N5 2.00” (50.8) 3 99.5 MT-ZNS51X3-2N5 2.00” (50.8) 6 99.5 MT-ZNS51X6-2N5 3.00” (76.2) 3 99.5 MT-ZNS76X3-2N5 3.00” (76.2) 6 99.5 MT-ZNS76X6-2N5 4” available
Zirconium Oxide ZrO2
1.00” (25.4) 3 99.95
Bonding Advised
MT-ZRO225X3-3N5 1.00” (25.4) 6 99.95 MT-ZRO225X6-3N5 2.00” (50.8 3 99.95 MT-ZRO251X3-3N5 2.00” (50.8 6 99.95 MT-ZRO251X6-3N5 3.00” (76.2) 3 99.95 MT-ZRO276X3-3N5 3.00” (76.2) 6 99.95 MT-ZRO276X6-3N5 4” available
De
po
sition
Ma
teria
ls
K32 Deposition Materials
Sputter Target Backing Plate & Bonding Service
Standard Circular and Linear Backing Plates, including Ob-round available OFHC Copper (Cu) and Molybdenum (Mo) Backing Plate Materials available Custom Backing Plates to suite all OEM Deposition Process Systems fabricated to order Indium and Elastomer Bonding methods Nanofoil Bonding available Bonding gives greater thermal conductivity and offers rigidity to thinner and fragile materials Precious Metals can be Reclaimed from Backing Plates
Circular Backing Plates
Material Target Size Thickness Notes Part Code
OFHC Copper (Cu) 1” (25.4mm) 1.0mm
For all standard circular magnetron sources
MT-CUBPLATE1-1 2.0mm MT-CUBPLATE1-2 3.0mm MT-CUBPLATE1-3
Other thicknesses available
OFHC Copper (Cu) 2” (50.8mm) 1.0mm
For all standard circular magnetron sources
MT-CUBPLATE2-1 2.0mm MT-CUBPLATE2-2 3.0mm MT-CUBPLATE2-3
Other thicknesses available
OFHC Copper (Cu) 3” (76.2mm) 1.0mm
For all standard circular magnetron sources
MT-CUBPLATE3-1 2.0mm MT-CUBPLATE3-2 3.0mm MT-CUBPLATE3-3
Other thicknesses available
OFHC Copper (Cu) 4” (101.6mm) 2.0mm
For all standard circular magnetron sources
MT-CUBPLATE4-2 3.0mm MT-CUBPLATE4-3 4.0mm MT-CUBPLATE4-4
Other thicknesses available
OFHC Copper (Cu) 6” (152.4mm) 3.0mm For all standard circular
magnetron sources MT-CUBPLATE6-3
6.0mm MT-CUBPLATE6-6 Other thicknesses available
OFHC Copper (Cu) 8” (203.2mm) 3.0mm For all standard circular
magnetron sources
MT-CUBPLATE8-3 6.0mm MT-CUBPLATE8-6
Other thicknesses available
Linear Backing Plates
Material Source/Series OEM Part Code
OFHC Copper (Cu) 600/900 Series MRC MLT-MRCCUBP900
Stainless Steel (SS) 8600 Series MRC MLT-MRCSSBP8600
OFHC Copper (Cu) 601 Series CVC MLT-CVCUBP601 inc. cooling track
OFHC Copper (Cu) 2400/4400 Series Perkin-Elmer MLT-PECUBPRF RF & DC options available MLT-PEFECUBPDC
De
po
sition
Ma
teria
ls
K33 Deposition Materials
Sputter Target Backing Plate & Bonding Service
Standard Circular and Linear Backing Plates, including Ob-round available OFHC Copper (Cu) and Molybdenum (Mo) Backing Plate Materials available Custom Backing Plates to suite all OEM Deposition Process Systems fabricated to order Indium and Elastomer Bonding methods Nanofoil Bonding available Bonding gives greater thermal conductivity and offers rigidity to thinner and fragile materials Precious Metals can be Reclaimed from Backing Plates
Indium Bonding for Circular Sputter Targets
Material Target Size Part Code
Indium 1” (25.4mm) MT-BONDIND1
Indium 2” (50.8mm) MT-BONDIND2
Indium 3” (76.2mm) MT-BONDIND3
Indium 4” (101.6mm) MT-BONDIND4
Indium 6” (152.4mm) MT-BONDIND6
Indium 8” (203.2mm) MT-BONDIND8
Indium Bonding for Linear Sputter Targets
Material Source/Series OEM Part Code
Indium 600/900 Series MRC MLT-MRCBONDIND1
Indium 8600 Series MRC MLT-MRCBONDIND2
Indium 601 Series CVC MLT-CVCBONDIND
Indium 2400/4400 Series Perkin-Elmer MLT-PEBONDIND
De
po
sition
Ma
teria
ls
K34 Deposition Materials
Sputter Target Backing Plate & Bonding Service
Standard Circular and Linear Backing Plates, including Ob-round available OFHC Copper (Cu) and Molybdenum (Mo) Backing Plate Materials available Custom Backing Plates to suite all OEM Deposition Process Systems fabricated to order Indium and Elastomer Bonding methods Nanofoil Bonding available Bonding gives greater thermal conductivity and offers rigidity to thinner and fragile materials Precious Metals can be Reclaimed from Backing Plates
Elastomer Bonding for Circular Sputter Targets
Material Target Size Part Code
Elastomer 1” (25.4mm) MT-BONDELAS1
Elastomer 2” (50.8mm) MT-BONDELAS2
Elastomer 3” (76.2mm) MT-BONDELAS3
Elastomer 4” (101.6mm) MT-BONDELAS4
Elastomer 6” (152.4mm) MT-BONDELAS6
Elastomer 8” (203.2mm) MT-BONDELAS8
Elastomer Bonding for Linear Sputter Targets
Material Source/Series OEM Part Code
Elastomer 600/900 Series MRC MLT-MRCBONDELS1
Elastomer 8600 Series MRC MLT-MRCBONDELS2
Elastomer 601 Series CVC MLT-CVCBONDELS
Elastomer 2400/4400 Series Perkin-Elmer MLT-PEBONDELS
De
po
sition
Ma
teria
ls
K35 Deposition Materials
Sputter Target Backing Plate & Bonding Service
Standard Circular and Linear Backing Plates, including Ob-round available OFHC Copper (Cu) and Molybdenum (Mo) Backing Plate Materials available Custom Backing Plates to suite all OEM Deposition Process Systems fabricated to order Indium and Elastomer Bonding methods Nanofoil Bonding available Bonding gives greater thermal conductivity and offers rigidity to thinner and fragile materials Precious Metals can be Reclaimed from Backing Plates
Nanofoil Bonding for Circular Sputter Targets
Material Target Size Part Code
Indium Nanofoil 1” (25.4mm) MT-BONDNANO1
Indium Nanofoil 2” (50.8mm) MT-BONDNANO2
Indium Nanofoil 3” (76.2mm) MT-BONDNANO3
Indium Nanofoil 4” (101.6mm) MT-BONDNANO4
Indium Nanofoil 6” (152.4mm) MT-BONDNANO6
Indium Nanofoil 8” (203.2mm) MT-BONDNANO8
De
po
sition
Ma
teria
ls
K36 Deposition Materials
Precious Metal Reclaim Service
Precious Metals Reclaimed from used Sputter Targets, Pellets/Pieces, Wire, Foil and Powder Materials Reclaim Service available for…
Material
Gold Au
Iridium Ir
Osmium Os
Palladium Pd
Platinum Pt
Rhenium Re
Rhodium Rh
Ruthenium Ru
Silver Ag
Tantalum Ta
85% of the material fix price on the day of goods received. Final price is based on 85% fix price after melt weight and assay results. An admin fee of £35 is chargeable per material unit sent for reclaiming.
Note: The remaining balance (value) can be either paid back as a monetary sum, or used against purchasing a new target or evaporation material, with any additional cost or credit owed invoiced/paid back accordingly. A new quotation based on the days metal fix price would be required for new targets.
An additional charge may result from us needing to remove any backing plates fixed to targets. These can be returned with a shipping cost applied.
A Returns Authorisation form will need to be completed and signed prior to goods being sent to us for reclaim, showing that the material has not been exposed to hazardous, toxic or radioactive materials and/or environment.
De
po
sition
Ma
teria
ls
K Deposition Materials
Contact us...
k-tech supplies ltd wild thyme udimore road broadland row broad oak rye east sussex tn31 6bx united kingdom
web : www.ktechsupplies.co.uk email : [email protected] tel : +44 (0)1424 400 235 fax : +44 (0)7006 044 223
De
po
sition
Ma
teria
ls