Date post: | 12-Jan-2016 |
Category: |
Documents |
Upload: | blaise-taylor |
View: | 214 times |
Download: | 0 times |
K. F. Chan (Mr.) ELEC 3105 1
INTERIOR LIGHTING DESIGN
The basic aim of good lighting design should be to create a lighting installation that provides both good task visibility and a satisfactory visual environment.
K. F. Chan (Mr.) ELEC 3105 2
MAINTAINED ILLUMINANCE
K. F. Chan (Mr.) ELEC 3105 3
COLOUR TEMPERATURE
K. F. Chan (Mr.) ELEC 3105 4
K. F. Chan (Mr.) ELEC 3105 5
COLOUR TEMPERATURE
Group 1 warm lamps for relaxation spaces less than 300 lux
Group 2 intermediate lamps for blending with daylight
Group 3 cool lamps for working interiors with high illuminance level
K. F. Chan (Mr.) ELEC 3105 6
COLOUR RENDERING
K. F. Chan (Mr.) ELEC 3105 7
K. F. Chan (Mr.) ELEC 3105 8
UNIFORMITY OF ILLUMINANCE
In general, if the recommended SHR is not exceeded, minimum to average of 0.8 can be achieved
In general, if the mid-point ratio calculated according to CIBSE TM5 does not exceed 0.7, uniformity of 0.8 can also be achieved.
K. F. Chan (Mr.) ELEC 3105 9
SHR