NEXT LEVEL KALEA B385 • Quick installation ready to use the same day • Robust and reliable screwdriven operation • Finishes in grey powder coating in RAL 9006 or stainless steel • Does not require a separate machine room • Rated load: 385 kg, 3 persons • Travel height: < 3 m • 60 mm pit or ramp • Tactile braille push buttons • Emergency light and emergency stop button • Low operating costs and low power consumption • Tested and approved according to the Machinery Directive 2006/42/EC. e lift is CE marked.
Transcript
NEXT LEVEL
KALEAB385 • Quick installation ready to use the same day
• Robust and reliable screwdriven operation
• Finishes in grey powder coating in RAL 9006 or stainless steel
• Does not require a separate machine room
• Rated load: 385 kg, 3 persons
• Travel height: < 3 m
• 60 mm pit or ramp
• Tactile braille push buttons
• Emergency light and emergency stop button
• Low operating costs and low power consumption
• Tested and approved according to the Machinery Directive
2006/42/EC. The lift is CE marked.
Best accessibility and simplicity with Kalea B385 Kalea B385 has been designed to provide a cost-effective solution for easy access in the majority of environments; private, public and commercial.
Kalea B385 is suitable for both indoor and outdoor conditions. This lift is designed to make entrances of apartments, public buildings and shops more accessible. Kalea B385 takes up little space and requires only 60 mm pit or ramp. It is designed for 2 stops and has a maximum travel of 3 metres. The screw-driven machinery is protected within a closed-off, integrated machine room. Since this lift requires very little building work, Kalea B385 is suitable for both existing and new buildings.
FAST TO INSTALL AND EASY TO MAINTAIN
The lift is easy to install since it does not need a se-parate machine room or shaft. In addition, the Kalea B385 can be installed in one day with the possibility to be placed directly on the ground. The foundation should be molded and stand the lift load, approx-imately 800 kg totally. In addition to low installation costs, the platform lift has a low operation and maintenance costs.
SAFETY
• The control panel has easy to use tactile braille push buttons, emergency light and emergency stop button.
• A pressure-sensitive plate is located under the platform that will stop any further downward move-ments if any object should get in the way of the lift when moving down.
TECHNICAL INFORMATION KALEA B385
Lift location Indoors and outdoors
Rated load 385 kg /3 pers
Rated speed (m/sec) Max 0.06
Travel height Max 3 m
Pit depth 60 mm
Plattform dimension (WxD) mm 900 × 1400
Footprint dimension (WxD) mm 1310 × 1520
Plattform dimension (WxD) mm* 1100 × 1400*
Footprint dimension (WxD) mm* 1510 × 1520*
Plattform dimension (WxD) mm** 1100 × 1600**
Footprint dimension (WxD) mm** 1510 × 1720**
Maximum number of stops 2
Mast, platform, door frame finish Powder coated grey, RAL 9006
Landing gate configuration Swing door/900x1100 mm
Driving system Screw and nut
Control system PLC
Standard power supply 3 × 400VAC 10A 1 × 230VAC 16A (option)
Our standard lifts meet the most common requirements and needs that may exist on the market. Your lift can be customized to fit your specific requirements with our wide range of accessories and options.
LOCKING SYSTEMS
School lock system on the platform´s control panel
EXTRA FUNCTIONS
Remote call button
Remote elbow call button
Additional remote control
Electric emergency lowering
Soft start & stop 1x230VAC/16A
Possible to connect to external alarm signal
Safety bar on B-side (if close to a wall)
Side Access (90°)
FINISH
Safetyglass in a tinted tone
Polycarbonate in brown
Gates and barriers infill in safety glass
Gates and barriers infill in plexi
Gates and barriers infill in polycarbonate
DOORS
Powder coated door frame in any RAL color
A thermoisolated full height door for installation directly into a building
STANDARD INDOOR
Cladding of machine room, frames and control panel: Powder coated in RAL 9006
Gates and barriers infill plexi
Tactile push buttons rated IP20
Chassis and frame powder coated
OUTDOOR
Cladding of machine room, frames and control panel: Resistant powder coating for outdoor use, RAL 9006
Gates and barriers infill polycarbonate for external use
Tactile push buttons rated IP65
Chassis and frame galvanized
STAINLESS STEEL
Cladding of machine room, frames and control panel: Stainless steel
Chassis powder coated, frame in stainless steel
Gates and barriers infill clear safetyglass(5+5+0.76 tempered and laminated)
