BEST PRODUCTS MEASUREMENT SOLUTION

2 Price in USD - Excluded 10% V.A.T

PRICE LIST KANSAI (JAPAN) - 2014 & 2015 - www.haophuong.com

PRODUCTS MODELPROCESSCONNEC-

TIONSPECIFICATIONS

UNIT PRICE (USD)

Standard type, Made in JapanNM- SC Screw Standard model with G1B screw, shaft dia. 8mm $190.48

NM- 8B Flange Standard model with steel flange, shaft dia. 8mm $314.29

NM- 8BS Slide flange Extension pipe model with AC flange, L<500mm $576.19

NM- 8BF

Flange

Standard model with steel flange, flexible shaft $366.67

NM- 8BA Length adjustable model with steel flange, L<1000mm $523.81

NM- 8BH Heat resistant model max.150 degree C with AC flange $576.19

NM- 8BHS Slide flange Heat resistant model max.150 degree C with extension pipe, L<500mm $785.71

NM- 8BHA Flange Heat resistant model max.150 degree C with length adjustable shaft, L<1000mm $796.19

Explosion proof (flame proof) type, Made in Japan FL-GM

Flange

Explosion proof (d2G4), shaft dia. 8mm $1,026.67

FL-GMA Length adjustable model with steel flange, L<1000mm $1,257.14

FL-GMS Extension pipe model with steel flange, L<500mm $1,361.90

FL-GMH Heat resistant model max. 250 degree C with steel flange $1,361.90

FL-GMHS Heat resistant model max. 250 degree C with extension pipe, L<500mm $1,571.43

FL-GMHA Heat resistant model max. 250 degree C with length adjustable shaft, L<1000mm $1,602.86

Inner tank hanging type, Made in Japan

NL-8DA With G1 - 1/2 screw, shaft dia. 8mm $471.43

Small type, Made in Japan Specifications: Power Source: 100–110VAC or 200–220VAC 50/60Hz Power Consumption: 1.5W Contact Capacity: SPDT, 250VAC 3A Applications: Palm-size for small tank !

LS- 1

Screw mounting (Size 3/4)

Shaft dia. 6mm 100VAC $157.14

LS- 2 Shaft dia. 6mm 200VAC $157.14

LS- H-1 Heat resistant model, max. 150 degree C, 100VAC $209.52

LS- H-2 Heat resistant model, max. 150 degree C, 200VAC $261.90

ROTARY PADDLE TYPE LEVEL SWITCH

YW SERIES Ф 22

Features: ♦ As it can be handled easily, it is operated stably for a long term ♦ High-temperature specifications and load bearing specifications are available ♦ A clutch mechanism is provided as standard equipment to protect the motor from overloads on the paddle ♦ Various apparent specific gravities can be supported by selecting a suitable paddle shapeSpecifications: ● Power Source: 100–110VAC or 200–220VAC 50/60Hz ● Power Consumption: 4W ● Contact Capacity: SPDT, 250VAC 10A, 30VDC 10A ● Allowable Temperature: 0~50°C (Standard type)Applications: ♦ Powder: cement, plastic, sugar, animal food, powder milk, powder soap ♦ Grain: plastic, chemical fertilizer, rice, medicine

3Price in USD - Excluded 10% V.A.T

PRICE LIST KANSAI (JAPAN) - 2014 & 2015 - www.haophuong.com

PRODUCTS MODELPROCESSCONNEC-

TIONSPECIFICATIONS

UNIT PRICE (USD)

Standard type, Made in Japan

ALN-111-

Screw

Bare rod electrode, screw mounting R1, L<250mm $628.57

ALN-112- Ditto, 251<L<500mm $680.95

ALN-113- Ditto, 501<L<1000mm $733.33

ALN-114- Ditto, 1001<L<2000mm $785.71

ALN-115- Ditto, 2001<L<3000mm $942.86

Flat type , Made in Japan

Suitable for an agitation tank because it has no protruberance jut in a tank

ALN-131-

Flange

Standard flat electrode type, 35mm long $838.10

ALN-132- Flat electrode, 101mm<L<300mm, flange JIS10K100A FF/304SS $1,466.67

Wire type, Made in Japan

ALN-143-

Flange

L<1000mm, flange JIS10K50A FF/304SS $859.05

ALN-144- 1001<L<2000mm, flange JIS10K50A FF/304SS $911.43

ALN-145- 2001<L<3000mm, flange JIS10K50A FF/304SS - φ8mm $1,016.19

Pipe line type, Made in Japan

Effective and suitable for Liquids and Slurry, Flow or no flow detection

ALN-155-

Flange

Bore dia. 25A flange JIS10K25A FF/304SS $1,739.05

ALN-155- Bore dia. 32A flange JIS10K32A FF/304SS $1,917.14

ALN-155- Bore dia. 50A flange JIS10K50A FF/304SS $2,095.24

CAPACITANCE TYPE LEVEL SWITCH

YW SERIES Ф 22

Features: ♦ It has high sensitivity and stability ♦ It has excellent mechanical strength and durability ♦ It stably detects even extraneous matter and deposits ♦ It can also be used for highly conductive substances ♦ It can easily detect highly corrosive substancesSpecifications: ● Power Source: 100–110VAC or 200–220VAC 50/60Hz ● Power Consumption: 4.5W ● Contact Capacity: SPDT, 250VAC 10A, 30VDC 10A ● Allowable Temperature: −25°C~+60°C (Standard type)Applications:

Detecting level of many products including powder, granules, lump, liquid, paste, and foam

4 Price in USD - Excluded 10% V.A.T

PRICE LIST KANSAI (JAPAN) - 2014 & 2015 - www.haophuong.com

PRODUCTS MODEL PROCESS CONNEC-

TION SPECIFICATIONS

UNIT PRICE (USD)

Standard type, Made in Japan

KVX-111

Screw

Standard model, L=180mm $733.33

KVX-112 Standard model, L=250mm $942.86

KVX-121

Flange

Standard model with flange, L=180mm $859.05

KVX-122 Standard model with flange, L=250mm $1,068.57

Small type, Made in Japan

Specifications: Power Source: 105 / 210VAC ±10% ( 24VDC as option) Power Consumption: 4W Contact Capacity: SPDT, 250V AC 5A ( 30V DC 5A ) Applications: Highly sensitive & compact vibration level switch meeting demanding processes as well as hard requirements

XV2-111 Screw Standard model with R screw, L=110mm $712.38

XV2-121 Flange Standard model with flange, L=110mm $838.10

VIBRATING RODFeatures: ♦ It detects even measured substances with variations of properties such as relative permittivity and moisture percentage ♦ As it has a stainless steel integral construction, it has an excellent pressure-proof performance ♦ It can detect granules with an apparent specific gravity of 0.03 or more ♦ For the intrinsic safety explosion-proof (KVS) type, either a high-sensitivity rod or load bearing rod can be selectedSpecifications: ● Specifications: 105 / 210VAC ±10% ( 24VDC as option ) ● Power Consumption: 4W ● Contact Capacity: SPDT, 250VAC 10A (30VDC 10A) ● Allowable Temperature: −20°C~+60°C (Standard type)Applications: ♦ Powder: cement, flour, fly ash, lime powder,sugar, animal food, powder milk… ♦ Grain: plastic pellet, clinker, chemical fertilizer, cereal, rice, medicine…

5Price in USD - Excluded 10% V.A.T

PRICE LIST KANSAI (JAPAN) - 2014 & 2015 - www.haophuong.com

PRODUCTS MODEL PROCESS CONNEC-

TION SPECIFICATIONS

UNIT PRICE (USD)

Standard type, Made in Japan

KS2 Screw G1/8

Screw mount Standard type - Contact Capacity: SPDT, 250VAC 0.5A (200VDC 0.5A) - Float size: Φ28 x 27mm - Wetted material: SUS304 - Specific Gravity of Liquid: over 0.8 - Withstand temperature: 100°C

$106.61

KS2M Screw M8 x P1.25

Screw mount Ultra small float Ø18 - Contact Capacity: SPDT, 100VAC 0.5A (100VDC 0.5A) - Float size: Φ18 x 22mm - Wetted material: SUS304 - Specific Gravity of Liquid: over 0.95 - Withstand temperature: 100°C

$191.09

KS2T Screw G1/8

Screw mount Heat resistant (150°C) - Contact Capacity: SPDT, 140VAC 0.5A (140VDC 0.5A) - Float size: Φ40.8 x 27mm - Wetted material: SUS304 - Specific Gravity of Liquid: over 0.65 - Withstand temperature: 150°C

$184.05

KS4Screw M12 x P1.25

"Horizontal mount Standard type - Contact Capacity: SPDT, 250VAC 0.5A (200VDC 0.5A) - Float size: Φ28 x 27mm - Wetted material: SUS304 - Specific Gravity of Liquid: over 0.8 - Withstand temperature: 100°C

$130.74

KS4TScrew M12 x P1.25

Horizontal mount High temperature resistant Type - Contact Capacity: SPDT, 140VAC 0.5A (140VDC 0.5A) - Float size: Φ40.8 x 27mm - Wetted material: SUS304 - Specific Gravity of Liquid: over 0.65 - Withstand temperature: 150°C

$210.19

KS5V Screw M12 x P1.25

Horizontal mount High viscosity resistant type - Contact Capacity: SPDT, 250VAC 0.5A (200VDC 0.5A) - Float size: Φ40.8 x 27mm - Wetted material: SUS304 - Specific Gravity of Liquid: over 0.65 - Withstand temperature: 150°C

$154.88

KV2 Screw R3/8

Screw mount Standard type - Contact Capacity: SPDT, 250VAC 0.5A (200VDC 0.5A) - Float size: Φ44 x 25mm - Wetted material: PVC - Specific Gravity of Liquid: over 0.8 - Withstand temperature: 50°C

$287.63

SMALL TYPE FLOAT SWITCH

YW SERIES Ф 22

Features: Various environments are supported by various types of models !

♦ This series needs no power source and catches liquid surfaces accurately

♦ Use of a read switch ensures high reliability and long life duration

♦ The simple structure makes it easy to handle

♦ Various materials including stainless steel and corrosion-resistant

resins (PVC, PP, PTFE) are used to support various purposes of use

Applications: Oil, water, shipbuilding, chemical, various liquids/interface

6 Price in USD - Excluded 10% V.A.T

PRICE LIST KANSAI (JAPAN) - 2014 & 2015 - www.haophuong.com

PRODUCTS MODEL PROCESS CONNEC-

TION SPECIFICATIONS

UNIT PRICE (USD)

Flow switch, Made in Japan

KP-4 4×φ7 hole

- Wall-mounted only Type - Output Contact: SPDT x 1 - Contact Capacity: 250VAC 10A - Standard Operating Angle : about 5°(fixed) - Enclosure Rating : Equivalent to IP43

$314.29

KP-820 6×φ7 hole

- Good for flow detection on conveyer - Output Contact: SPDT x 1 - Contact Capacity: 250VAC 5A - Standard Operating Angle : about 15° - Enclosure Rating : Equivalent to IP43

$586.67

Emergency Stop Switches: Pull-Wire switches for safety, Made in Japan

KP-850 2×φ10

hole, pitch 110

- Action: Manual-reset - Power Source: no need - Output Contact: SPDT x 1 - Contact Capacity: 250VAC 10A - Contact Range: C – A are closed depending on the tilt of wire lever - Enclosure Rating : Equivalent to IP67

$356.19

KP-860 2×φ10

hole, pitch 111

- Action: Manual-reset - Power Source: 100VAC or 200VAC - Output Contact: SPDT x 2 - Contact Capacity: 250VAC 10A - Contact Range: Depending on the tilt of wire lever, C – A are closed, and Operating Lamp turns on or off - Enclosure Rating : Equivalent to IP67

$419.05

Conveyor-belt Alarm Switch, Made in Japan

KP-880 2×φ10

hole, pitch 110

- Standard model with steel roller - Action: Auto Recovery - The housing main body is of aluminum casting and of light/robust build - Output Contact: SPDT x 2 - Enclosure Rating : Equivalent to IP67

$419.05

Tilt Switch, Made in Japan

It has a simple structure and can withstand severe impact loads of particulates

TC-3

- Standard model, cast aluminum case - Output Contact: SPDT x 2 - Weight: About 1.3 kg (Aluminum casting) 2 or 3 wire system - Enclosure Rating : Equivalent to IP56 - Conduit Connection: 1/4 – 3/8 inch cable, 1/2 inch screw

$440.00

EQUIPMENT FOR CONVEYOR LINES

YW SERIES Ф 22

Features: The secure operations ensure the safety of conveyor lines ! ♦ The simple structure makes the operation secure ! ♦ The protection code is IP-67 ♦ The maximum length of the pull-wire rope is 50 mApplications:Belt conveyorCement industry, Mining industry, Steel industry...

7Price in USD - Excluded 10% V.A.T

PRICE LIST KANSAI (JAPAN) - 2014 & 2015 - www.haophuong.com

Head o�ce:Address: 7/31 Song Than Business Center, Di An, Binh Duong, VN.Tel: (84 650) 37 37 619Fax: (84 650) 37 37 620

Ha Noi o�ce:Address: 16/6/102 Nguy Nhu, Kon Tum Nhan Chinh, Thanh Xuan, HN.Tel: (84 4) 3568 3740Fax: (84 4) 3568 3741

Cambodia o�ce:Address: O�ce S2 Second Floor Left. Blue Green Service O�ce Space & Apartment. 13A, St 81 (Wat Koh) Boeung Raing, PP. Tel: 023 22 36 35 - Fax: 023 22 36 45