Cam fittings
• Double safety provided by interiorand exterior indentation.
• The dowel is always tightened centrally, thereby ruling out displacement of the furniture components!
• No more loosening due to vibration during transport.
• The indentations, both inside andout, prevent accidental loosening of the cam.
174
175
Cam fitting Rastex 15
with torque support
Rastex 15 cam fitting with torque supportAll Rastex 15 versions are equipped with a torque support, whichallows panels to be up to 4 mm apart before tightening.� Double safety provided by interior and exterior indentation.
The dowel is always tightened centrally, thereby ruling out displacement of the furniture components!
� Cam can be tightened with a slot screwdriver orcrosshead screwdriver PZ 3 or Allen key SW 4.
� Useable in 15 - 16 mm panels.� Die-cast zinc
Dowels / sockets - see pages 176-178
Cover caps, plastic for all RASTEX 15 versions
Finish Order no. PU
white 071 054 200brown 071 055 200black 079 490 200pine 079 491 200
Article Finish for 15-16 mm panels for 19 mm panels PUwithout rim with rim without rim with rim
Rastex 15 cam fitting self-colour 9 007 997 9 008 713 9 006 655 1 079 689 2000nickel-plated 9 003 948 9 003 954 9 013 163 1 030 986 2000
176
34
ø811,5
ø5
30 11
30 8,5
24
ø89
ø5
34
ø89
ø5
24
ø811,5
ø5
20 11
20 8,5
ø5
ø5
ø5
ø5
ø8
ø8
11
DU 319/DU 320 can be used with…
Dowels / sockets for Rastex 15Hole diameter 5 and 8 mm
Hettich TwisterScrew-in dowel DU 319Euro screw thread for 5 mm hole diameter,dowel length 20 mmsteel self-colour / plastic green
Hettich TwisterScrew-in dowel DU 320Euro screw thread for 5 mm hole diameter,dowel length 30 mmsteel self-colour / plastic black
Hettich TwisterScrew-in dowel DU 243Euro screw thread for 5 mm hole diameter,dowel length 20 mmsteel self-colour / plastic green
Hettich TwisterScrew-in dowel DU 232Euro screw thread for 5 mm hole diameter,dowel length 30 mmsteel self-colour / plastic black
Socket no. 49with threaded sleeve for hole dia. 8 mmplastic
Article Order no. PU
Twister DU 319 9 047 974 2000
Article Order no. PU
Twister DU 320 9 047 976 2000
Article Order no. PU
Twister DU 243 9 047 862 2000
Article Order no. PU
Twister DU 232 9 047 644 2000
Finish Order no. PU
white 9 015 676 10 000
Mounting example Article
Drilling jig Accura for System 32 and dowel drilling - see page 12-17
177
ø10
ø10
13
ø10
24
ø8 11,5
ø 8/10
34
ø8 11,5
ø 8/10
30 7,8
M6
20 7,8
M6
Mounting example Article
DU 645/DU 644 can be used with... Socket no. 100for thread M6 and 10 mm hole diameterplastic
Finish Order no. PU
white 1 005 074 5000
Hettich Twister / socket for Rastex 15Hole diameter 10 mm
Hettich Twister screw-in dowel DU 645Thread M6 x 7,8 mm,dowel length 20 mmsteel self-colour / plastic green
Hettich Twister screw-in dowel DU 644Thread M6 x 7,8 mm,dowel length 30 mmsteel self-colour / plastic black
Article Order no. PU
Twister DU 645 9 047 866 2000
Article Order no. PU
Twister DU 644 9 047 864 2000
ø10
ø10
ø10
178
Hettich Rapid Fast - faster - Rapid S1. Fast– Push-fit – much faster than screw fixing.– The 8 mm dowel shank dispenses with the wood dowels previously required to
position the shelf. This shortens processing and installation times and reduces costs.2. Safe– The socket expands immediately when the eccentric cam is tightened and pull-out
strength is increased considerably.– The stop ring on top of the expanding socket ensures consistent insertion depth
and therefore correct dowel function.– Double safety and optimum firm seating of the fast assembly dowel in conjunction
with the interior and exterior indentations of the Rastex system.– Disassembly of the dowel is performed simply by hand - again, no tools are required.3. Comfortable– Toolless assembly dispenses with screw fixing in the dowel.
The dowel and expanding socket are simply pushed with the finger into the drilling hole.– The plastic dowel shank is easy to handle - insertion is performed easily by hand,
regardless of whether the furniture construction calls for one or a hundred dowels.
Fast assembly dowel Hettich Rapid S for Rastex 15Hole diameter 8 and 10 mm
Article Order no. PU
Rapid DU 324 9 046 180 2000
Article Order no. PU
Rapid DU 325 9 046 182 2000
Mounting example Article
10,520 ø8
Hettich Rapid SFast assembly dowel DU 324Expanding socket for 8 mm hole diameter,dowel length 20 mmdie-cast zinc / blue plastic
11
24
ø8 ø8
ø810,530
Hettich Rapid SFast assembly dowel DU 325Expanding socket for 8 mm hole diameter,dowel length 30 mmdie-cast zinc / blue plastic
11
34
ø8 ø8
Article Order no. PU
Rapid DU 332 9 046 184 2000
ø10
Hettich Rapid SFast assembly dowel DU 332Expanding socket for 10 mm hole diameter,dowel length 20 mmdie-cast zinc / green plastic
11
24
ø8ø10
10,520
Article Order no. PU
Rapid DU 333 9 046 186 2000
10,530 ø10
Hettich Rapid SFast assembly dowel DU 333Expanding socket for 10 mm hole diameter,dowel length 30 mmdie-cast zinc / green plastic
11
34
ø8ø10
179
9,5
20
19 14
9,5
+0,5
12
Cam fitting VB 35� Decorative connecting fittings for positive connections
of panels and sides according to the tried and trusted eccentric latching principle.
� The fitting is pressed into a 20 mm dia. hole.The panel can be inserted from above or from the front.
� For bottom panels, the eccentric cam can be tightened also from above.For this purpose, a through hole in the shelf is required.
Drilling patternfor panels
Insert panel from above or the front
Dowel centre fromunderside of panel
Connecting fitting VB 35/19for 19 mm panels
Dowels / sockets - see pages 184-185
Article Finish Order no. PU
VB 35/19 white 1 019 479 1000plastic brown 1 019 480 1000
black 079 641 200
Cam fittingVB 35
180
9,5
20
19 14
9,5
+0,5
12
Cam fittingVB 35 M
Cam fitting VB 35 M� Decorative connecting fittings for positive connections
of panels and sides according to the tried and trustedeccentric latching principle.
� The connecting fittings are equipped with a torque support which allows panels to be up to 2 mm apart before tightening.
� The fitting is pressed into a 20 mm dia. hole. The panel can be inserted from above.
� For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in theshelf is required.
Fit shelf in positionfrom above.Mounting aid when hangingshelves.
Drilling pattern for panels
Dowel centre fromunderside of panel
Connecting fitting VB 35 M/19for 19 mm panels
Dowels / sockets - see pages 184-185
Article Finish Order no. PU
VB 35 M/19 white 1 019 473 1000plastic brown 1 019 474 1000
black 079 643 200
181
9,5
12
10
9,5
20
32
1910,5 14
+0,5
Cam fittingVB 36
Insert panel from above orthe front
Cam fitting VB 36� Decorative connecting fittings for positive connections
of panels and sides according to the tried and trusted eccentric latching principle.
� The fitting is pressed into double holes with a drilling distance of 32 mm. 20 mm and 10 mm diameterinsertion drilling holes.The panel shelf can be inserted from above or from the front.
� For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required.
Drilling patternfor panels
Dowel centre fromunderside of panel
Dowels / sockets - see pages 184-185
Article Finish Order no. PU
VB 36/19 white 1 019 487 500plastic brown 065 532 200
black 079 646 200almond 1 079 566 500
Connecting fitting VB 36/19for 19 mm panels
182
8
+0,5
10 20
32
9,5
1610,5 12,5
12 12
10
9,5
20
32
1910,5 14
+0,5
9,5
Cam fittingVB 36 M
Fit shelf in positionfrom above.Mounting aid when hangingshelves.
Cam fitting VB 36 M� Decorative connecting fittings for positive connections
of panels and sides according to the tried and trusted eccentric latching principle.
� The connecting fittings are equipped with a torque support which allows panels to be up to 2 mm apart before tightening.
� The fitting is pressed into double holes with a drilling distance of 32 mm. 20 mm and 10 mm diameterinsertion drilling holes. The panel can be inserted from above.
� For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required.
Dowels / sockets - see pages 184-185
Drilling patternfor panels
Dowel centre fromunderside of panel
Drilling patternfor panels
Dowel centre fromunderside of panel
Connecting fitting VB 36 M/16for 16 mm panels
Connecting fitting VB 36 M/19for 19 mm panels
Article Finish Order no. PU
VB 36 MD /16 nickel-plated 065 517 200die-cast zinc
VB 36 M /16 white 1 019 482 500plastic brown 1 019 483 500
black 079 647 200almond 1 076 883 500
Article Finish Order no. PU
VB 36 MD/19 nickel-plated 1 019 493 250die-cast zinc
VB 36 M /19 white 1 019 484 500plastic brown 1 019 693 500
black 079 648 200almond 9 000 239 500
183
+0,5
8
20
9,5
16 12,5
Connecting fittingVB 135 for shelves
Fit shelf in positionfrom above.Mounting aid when hangingshelves.
Connecting fitting VB 135The connecting fitting VB 135 is pressed into a 20 mm dia. hole.The panel can only be inserted from above.The panel with the VB 135 is merely pressed on to the dowel. Via the wedge effect, the shelf is tightened on the side and safeguarded against accidental removal.Can be used with panels from 16 mm upwards.
Drilling patternfor panels
Dowel centre fromunderside of panel
Connecting fitting VB 135for panels from 16 mm
Article Finish Order no. PU
VB 135 plastic white 1 016 559 1000
brown 073 617 200black 079 649 200
Dowels / sockets - see pages 184-185
184
6,7 12
6,7 12
6,7 7,8
M4
12,5
ø5
12,5
ø5
ø5
ø5
8
9M4
ø5
Mounting example Article
Dowels / sockets / endscrews for VB 35/35 M, VB 36/36 M, VB 135Hole diameter 5 mm
Finish Order no. PU
self-colour 1 019 686 4000
Finish Order no. PU
self-colour 064 880 200
Finish Order no. PU
self-colour 1 035 240 2000
Screw-in dowel DU 248Euro screw thread for 5 mm hole diameter,dowel length 6,7 mmdie-cast zinc
Knock-in dowel DU 728for 5 mm hole diameter,dowel length 6,7 mmsteel
Screw-in dowel DU 426Thread M4 x 7,8 mm, dowel length 6,7 mmsteel
DU 426 can be used with...
Finish Length Order no. PU
nickel-plated 8 mm 079 525 200nickel-plated 9 mm 079 527 200
End screwfor thread M4,for use with threaded sleeve M4steel
Hole diameter Order no. PU
5 mm 1 005 077 2000
Expanding socketfor thread M4 and 5 mm hole diameterbrass, self-colour
Drilling jig Accura for System 32 and dowel drilling- see page 12-17
8,5
ø5
ø5
7,8
ø5
11,5
ø5
6,7 11
3
Finish Order no. PU
zinc-plated 074 688 200
Screw-in dowel DU 279only for VB 35/36, with high collar, Euro screw thread for 5 mm hole diameter, dowel length 6,7 mmsteel
ø5
185
12,5
ø8/
ø8/10
6,7 7,8
M6
Mounting example Article
Finish Order no. PU
self-colour 1 035 241 2000
Dowels / sockets for VB 35/35 M, VB 36/36 M, VB 135Hole diameter 5 and 8 mm
Screw-in dowel DU 648Thread M6 x 7,8 mm,dowel length 6,7 mmsteel
DU 648 can be used with...
Article Finish Order no. PU
Expanding socketwith nylon ball brass, self-colour 079 538 200
Expanding socket with nylon ballfor thread M6 and 8 mm hole diameterlength 12 mmbrass, self-colour
Drilling jig Accura for System 32 and dowel drilling - see page 12-17
ø5
16
ø5
19
ø5
ø5
22,8
25,8
Finish Order no. PU
nickel-plated 1 019 543 2000
Finish Order no. PU
nickel-plated 1 019 544 2000
End dowel DU 981for 16 mm side and 5 mm hole diameter, dowel length 22,8 mmsteel
End dowel DU 982for 19 mm side and 5 mm hole diameter,dowel length 25,8 mmsteel
ø8
12
ø8