Plaster mesh - chicken wire, welded wire and expanded

metal

Light expanded metal

As reinforcing material, plaster mesh is used for building internal and external decoration,

especially in plastering work. It protects the plaster layer surface from cracking and

increases the mechanical strength of the plaster layer. Meanwhile plastering mesh provides

a better grip with plaster wall and forms the skeleton layers of the wall plaster and putty,

thereby significantly strengthening the plaster layer and significantly extending its service

life. Due to its strength and durability, plaster mesh is also successfully used as reinforcing

material in strengthening the foundations of buildings, restoration and reinforcement of

existing plaster, brickwork, installation of thermal insulation and roofing tile ties, and road

laying pavement construction.

We offer the following types of plaster mesh: plastic mesh, fiberglass mesh cloth, welded

wire mesh, chain wire mesh, chicken wire, light type expanded metal, and woven wire

cloth. These metal mesh all has small square mesh and made from thin wire. Plastering

mesh in various kinds allows customers to find exactly the suitable one perfectly meeting

special requirements.

When choose plaster mesh, you must take into account its physical and mechanical

properties, as well as the purpose. For example, fiberglass cloth for the exterior surface

plastering need mesh density of 160 to 300 g / sq.m. Expanded metal with rhombic shape

mesh hole is successfully applied during underfloor heating installation and holding

plastering well. Galvanized plaster metal mesh has high resistance to corrosion. Using

galvanized mesh for plaster finishing work can significantly extend the life of the premises.

Welded

wire plaster mesh

When using for plastering, plaster layer and the reinforcing metal layer have different

thermal expansion coefficient. Therefore, subject to extreme changes in temperature,

chicken wire (durable twisted woven mesh) is more acceptable for plastering than welded

wire mesh or expanded metal. It has no risk of injury at work.Chicken wire plaster mesh

made from 0.6 - 2.0mm wire, mesh size from 13mm to 50 mm.

No bent and welded seams, light expanded metal greatly increases the strength and

durability at a very low weight. Because its rough surface, it combines well with putty,

plaster and waterproofing materials, ensuring high quality and durable plastering coatings

for walls and ceilings.

Welded stucco mesh is performed by welding of mild heat treated wire with or with out

zinc coating, helping the plaster layer of shrinkage walls avoid cracking. With the feature of

high resistance to corrosion, galvanized mesh is more durable.

Plaster woven mesh fabric is a square mesh cloth made from galvanized or non-

galvanized low carbon treated wire (diameter 0.5 -1.5mm). It includes black woven mesh

and galvanized mesh cloth. Woven plaster mesh is mainly used for reinforcement roughing

plastering. It can prevent cracks from shrinkage and increase the strength of the walls.

Chain link mesh with maximum density 3000 g/m2 is useful for plastering facade

structures. With high strength, it is not affected by adverse factors. While, For interior

plastering, you can use mesh with a density of 1300 g/m2 ( mesh size 10×10mm,

15×15mm).

Chain link

fence

As a great alternative to metal plaster mesh, plastic mesh is suitable for using on large

wall surfaces to reinforce a thick plaster layer. It will be an excellent surface protection from

cracking. plastic mesh netting is ideal for fast-drying the mixture.

Fiberglass cloth has the features of anti-corrosion, resistance to alkalis, light weight. In

general, fiberglass mesh exterior plastering helps to overcome stress caused by humidity

and extreme temperature changes. It has a high resistance to stretching and tearing,

protects the surface from cracking, improves the mechanical strength. Using it helps

plaster perfectly evenly.

Mesh plastering easily handled and mounted on brick, plaster, concrete, wood and even

embossed surfaces. Plastic and fiberglass mesh is fixed to the target surface often by

adhesive, or base construction stapler. Metal mesh was fixed to a wall surface often using

nails, screws and metal sheet piece.

All of our plater mesh is delivered in rolls and can have different sizes. You can contact

us to buy plaster metal mesh in wholesale and retail. We will give you an extensive range

of products at competitive prices, and theprice depends on the materials, mesh size and

the presence of the galvanized layer.

Contact us to get plaster mesh free quote or information

KATY plaster mesh company

Add: Industrial Park, Anping County, Hengshui City, Hebei Province, China

TEL: +86-318-74682598

FAX: +86-318-74682598

Web: http://www.plastermesh.com

Mail: sales@plastermesh.com

http://www.plastermesh.com/plastermesh/chicken-wire.html

Chicken wire with flexibility structure for plaster - no injury

A roll of

black plaster hexagonal wire netting

Chicken wire has specific properties for plastering use.Chicken wire mesh is formed by

twisting two adjacent wires at least four times, forming a strong honeycomb mesh

structure. So, it has a high strength and durability. Even if a place is cut off, it will not lead

to the entire chicken mesh structure destroyed. When using for plastering, plaster layer

and the reinforcing metal layer have different thermal expansion coefficient. Therefore,

subject to extreme changes in temperature, chicken wire (durable twisted woven mesh - no

rigid mesh) is more acceptable for plastering than welded wire mesh or expanded metal.

Using it when plastering effectively prevents plaster layer drying out and cracking.

Its hexagonal shape prevents the formation of internal stresses. Due to its flexibility

structure, chicken wire is convenient for mounting on curved and angled surfaces. Its other

benefits are twisted mesh improved corrosion resistance and no risk of injury at work. As its

special physical and mechanical properties, chicken wire is perfectly suited for

reinforcement plastering in construction, reinforcement waterproofing, leveling floors and

facade work.

Specification

Chicken wire for plaster is available in different materials, mesh size, and wire diameter.

Materials: galvanized low carbon wire, annealed wire.

Mesh size (distance between the faces of the hexagon ) from 13 to 50 mm.

The diameter of the wire mesh from 0.6 to 2.0 mm.

Delivered in rolls, roll width 1m to 2.5 m and roll length 50 m, 100m, 200m.

Price per square meter woven mesh depends on wire diameter and type of wire (uncoated

steel or galvanized).

Items Mesh size (mm) Wire diameter (mm) Roll height (m) Roll length (m)

PMCW-13 13 0.6, 0.7, 0.8, 1.0 1, 1.5, 2.0, 2.5 50, 100, 200m

PMCW-20 20 0.6, 0.7, 0.8, 1.0, 1.2 1, 1.5, 2.0, 2.5 50, 100, 200m

PMCW-25 25 0.6, 0.8, 1.0, 1.2, 1.4 1, 1.5, 2.0, 2.5 50, 100, 200m

PMCW-28 28 0.8, 1.0, 1.2, 1.4, 1.6, 1.8 1, 1.5, 2.0, 2.5 50, 100, 200m

PMCW-30 30 0.6, 0.8, 0.9, 1.0, 1.2, 1.4 1, 1.5, 2.0, 2.5 50, 100, 200m

PMCW-35 35 0.6, 0.8, 1.0, 1.2, 1.4, 1.6 1, 1.5, 2.0, 2.5 50, 100, 200m

PMCW-45 45 1.0, 1.2, 1.4, 1.8, 2.0 1, 1.5, 2.0, 2.5 50, 100, 200m

PMCW-50 50 0.6, 0.7, 0.8, 1.0, 1.2 1, 1.5, 2.0, 2.5 50, 100, 200m

Typical applications include: Reinforcement plaster, screed; Reinforcement surface for

laying ceramic tiles; Reinforcement plates facade insulation in heavy plaster systems

(galvanized chicken wire).

Plaster

chicken wire with mesh size 25mm from 0.9mm galvanized wire

Chicken

wire mesh is easy cut to your required size with a pliers

Small

chicken wire mesh adds strength to the brick wall

Two

chicken wire mesh is superimposed together in junction, shown as picture

Chicken

wire stapled to the wood slats provides a strong support for the plaster layer attaching to

the straw wall

Chicken

wire rolls package in warehouse

Plaster expanded metal protects wall against cracks and

fissures

Expanded metal mesh is most used as a reinforcing material in the interior decoration,

and especially when the plastering work, so sometimes referred to as stucco netting. It is

manufactured from sheet steel blade which cuts through and uniformly stretched in cells

having a diamond shape. So, it has no bends or welds, and is very strong and durable, with

a low weight. The ribbed surface makes it has the max adhesion.

When plastering walls it is used to keep the surface from cracking arising from temperature

extremes and humidity fluctuations. It can be used for absolutely all surfaces of concrete

and brick to wood, and even plaster ceilings. It must be mounted on a solid dowel-nails or

anchor bolts to hold the work was easier.

To create a durable bonding plaster to the wall using various reinforcing mesh. They can be

welded, made of galvanized steel wire, woven fiberglass. Each of these materials has its

own advantages and disadvantages. But the best currently considered material is the light

type expanded metal.

Expanded metal

schematic diagram, with pattern size 50×18×0.7×0.5mm

We offer a wide range of reinforcement plaster mesh:

Materials: cold-rolled metal sheet - galvanized or uncoated. If you want to prevent rust

stains and corrode, then use galvanized sheet.

Thickness of starting steel sheet: 0.5mm - 1.6mm, can be adjusted depend on properties

of the finished plaster mesh.

Opening size (mm): 15×7, 20×8, 30×12, 40×16, 45×17, 50×18.

Roll height: 1.0m - 2.5m

Roll length: 10m, 15m, 20m, 25m, 30m.

Specification details as the following table, the schematic diagram of patter size shown as

above picture.

Items Pattern size (mm) Width (m) Length/roll (m)

PMEP-1507A 15×7×0.9×0.7 1.0 - 2.5 10, 15

PMEP-1507B 15×7×1.0×0.7 1.0 - 2.5 10, 15

PMEP-2008 20×8×0.9×0.7 1.0 - 2.5 10, 15, 20

PMEP-3012 30×12×0.9×0.7 1.0 - 2.5 10, 15, 20, 25

PMEP-4016A 40×16×0.9×0.7 1.0 - 2.5 15, 20, 25

PMEP-4016B 40×16×1.0×0.7 1.0 - 2.5 15, 20, 25, 30

PMEP-4517A 45×17×0.7×0.5 1.0 - 2.5 10, 15, 20, 25, 30

PMEP-4517B 45×17×1.2×0.7 1.0 - 2.5 10, 15, 20, 25, 30

PMEP-5018A 50×18×0.7×0.5 1.0 - 2.5 10, 20, 25, 30

PMEP-5018B 50×18×1.4×1.0 1.0 - 2.5 20, 25, 30

Advantages and benefits of light expanded metal mesh

Expanded metal plastering mesh is the perfect combination of qualities such as

strength and flexibility and low weight.

Compared to welded mesh and woven mesh, it is the structural integrity - no

stitches and welds, which greatly simplifies the work with the product during

installation and transportation.

Can be cut into any shape, while maintaining its strength.

Due to its plasticity, it is convenient for mounting on curved and angled surfaces.

Can be used in plastering and tiling works on virtually any surface: concrete, brick,

plaster, wood.

Has maximum grip and is easy to open, easy to handle and use.

Unlike plastic and fiberglass mesh, expanded metal sheet has absolute resistance

to combustion, and greater durability and resistance to harsh environments and water.

Light type

plaster expanded metal roll

Expanded

metal rolls with 20×8×0.9×0.7mm mesh size

Expanded

metal used for plastering to keep the wall surface from cracking.

Expanded

metal rolls in warehouse

When plastering walls it is used to keep the surface from cracking arising from temperature

extremes and humidity fluctuations.

Application:

Expanded metal mesh used in construction as a reinforcing element for plastering and

finishing works, as well as the reinforcement reinforcing floors, ceilings and pavements. It

protects wall against cracks and fissures due to changes in temperature and humidity, and

mechanical stress. The expanded plastering mesh increases the mechanical strength of the

reinforced surface, including impact resistance. Installation and operation are very simple.

Plaster welded wire mesh - galvanized or black

Plaster

welded mesh with 20×20mm mesh size made from 1.0mm galvanized carbon wire

Plastering welded wire mesh is primarily made of thin low-carbon drawn wire or

galvanized wire with a diameter of 0.4 to1.5 mm, located in mutually perpendicular

directions and interconnected by spot welding. Its wire diameter is much smaller than the

standard welded wire mesh. It is perfect for plastering on uneven surfaces.

Welded mesh plastering has a wide scope. It can be used for the building inside and

outside plaster reinforcement. As an essential piece of plastering work, it creates lasting

plaster coating for absolutely all surfaces of concrete and brick to wood, and even plaster

ceilings. Before plastering, the welded mesh must be mounted on wall by a solid dowel-

nails or anchor bolts, which makes the plaster work easier. The welded wire mesh makes

the plaster wall surface smooth and no crack, also excludes the impact of external factors

on the wall.

If used for plastering in corrosion material, galvanized welded mesh is the best choice,

in order to avoid the appearance of red streaks and spots. If used for interior plaster work

and no corrosion material, needs no galvanizing, common carbon wire mesh will work well.

So most of the plaster mesh - it is not galvanized mesh.

Welded

wire mesh used for inside plastering work to brick wall, fixed by nails and small metal

piece.

Welded

wire mesh used for interior plaster work, with zinc coating anti-corrosion

Specification

Materials: carbon galvanized wire and no galvanized coated steel wire.

Mesh size vary from 10 mm×10 mm to 50mm×50mm.

The most popular mesh sizes: 12×12, 20×20, 25×25, 12×25m.

Wire diameter 0.4 - 1.5mm.

Roll height: 0.8m, 1.0m, 1.25m, 1.5m, 2.0m.

Roll length: 15m, 20m, 30m, 50m.

Reinforcing welded plaster

meshMesh size (mm) Wire diameter (mm)

PMWD-1010 10×10 0.4, 0.5, 0.55, 0.65, 0.7, 0.8, 0.9

PMWD-1212 12×12 0.5, 0.6, 0.8, 0.9

PMWD-1414 14×14 0.6, 07, 0.8, 0.9, 1.0

PMWD-1616 16×16 0.9, 1.0, 1.2

PMWD-2008 20×8 0.7, 0.8, 0.9, 1.0

PMWD-2020 20×20 0.8, 0.9, 1.0, 1.2

PMWD-2512 25×12.5 1.0, 1.2, 1.3

PMWD-2525 25×25 1.0, 1.2, 1.4

PMWD-4017 40×17 0.9, 1.0, 1.2, 1.4

PMWD-5020 50×20 1.2, 1.4, 1.5

PMWD-5050 50×50 12, 1.4, 1.5

Welded

wire mesh in roll with mesh size 25mm×25mm form 1.2mm galvanized steel wire

Chain link plaster mesh reinforces plaster surface

Chain link Plastering mesh is a type of light chain link fence used to prevent wall cracks

due to temperature changes. With its light weight, thin wire from 0.5mm to 2.0mm and

small mesh opening from 5mm to 25mm, it is also called mini or micro chain wire fence.

Chain link

fence used as plastering mesh

Low carbon steel and galvanized wire are its mainly materials. Due to the mesh for

reinforcing plaster surface does not involve direct contact with the grid environment, in

order to save money, the most commonly used is uncoated black mesh.

It is mainly used in finishing works for the reinforcement of the walls (architectural interior

wall plaster and outdoor wall insulation plaster) before applying the plaster layer - chain

link mesh nailed to the wall then immediately plastering. It is particularly important in the

construction of industrial plants, in which the walls are exposed to high vibration impacts

as a result of the machine, presses and other powerful mechanisms.

Basic parameters and dimensions

Mesh opening shape:

Rhombic mesh opening acute angle rhombus 60°- mesh opening 5mm, 10mm and 15mm;

Square mesh opening angle 90°- mesh opening 20mm and 25 mm.

Wire diameter: 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, 1.8mm, 2.0mm.

Chain link mesh

items

Mesh size

mm

Wire diameter

mm

Roll height

m

Roll length

m

PMCL-05 5×5 0.5, 0.6, 0.8, 1.0 1.0 10, 20

PMCL-10 10×10 1.2, 1.4 1.0 10, 20

PMCL-12 12×12 1.2, 1.4 1.0, 1.2 10, 20

PMCL-15 15×15 1.2, 1.4, 1.6 1.0, 1.2 10, 20

PMCL-20 20×20 1.4, 1.6, 1.8 1.2, 1.5 10, 15

PMCL-25 25×25 1.6, 1.8, 2.0 1.5, 2.0 10,15

Delived in rolls, standard roll length of 10m to 20meters and height of 1.0 to 2.0 m; each

end of the roll is bent at the connection to its helix coil at both ends; The ends of the roll

wrapped with plastic wrap.

Galvanized

chain link mesh with mesh size 15mm, wire diameter 1.2mm.

Chain link

fence rolls ends wrapped with plastic wrap

Plastering galvanized chain link fence Features: small aperture and small wire diameter.

flat surface, uniform pore size.

light weight, sturdy mesh.

high tensile strength.

simple construction and low cost.

When you buy should pay attention to the following points: Mesh sheet should be smooth, unacceptable excess of the average diameter of

more than 6-10 %.

Good mesh does not contain inverted helices and the adjacent spiral nested

without gaps, all the turns.

On both sides of chain wire mesh ends spirals must be cut and bent.

The total weight of 1 roll grid can not exceed 80 kg.

How much is the chain link mesh?

The price of chain link plaster mesh is determined by its materials and the appearance of

the coating, wire diameter and mesh size. Contact our sales managers to get the price.

Woven wire mesh for interior walls and facades plaster

Plastering soft woven wire mesh with square mesh opening made from carbon wire

with anticorrosion zinc coating or without zinc coating. Plaster mesh woven wire greatly

facilitates work on finishing of buildings and facades. Using it can prevents cracks occurring

by shrinkage material and significantly increases the mechanical strength and durability of

the plastering layers.

Woven plastering Mesh applications:

For the restoration and reinforcement in plaster works.

As a reinforcing material in painting and decorating interior walls and facades.

Increases the mechanical strength and durability of the plastering layers.

For prevention of deformation, shrinkage occurring materials.

To enhance the strength of finishing layers.

Woven wire mesh plaster technical specifications

Materials: heat-treated low carbon galvanized wire or black wire.

Square mesh - mesh size 2mm to 20mm.

Wire diameter 0.4mm to 2.5 mm.

Roll width: 1000mm, 1300mm, 1500mm, 1800mm, 2000mm, 3000mm.

Roll length: 30m, 50m, 60m, 80m.

Items Mesh size mm Wire diameter, mm

PMWM-20 2 0.40, 0.50, 0.60,1.00, 1.20

PMWM-22 2.2 0.45, 0.70

PMWM-25 2.5 0.40, 0.50, 0.60

PMWM-28 2.8 0.45, 0.90

PMWM-32 3.2 0.50, 0.80, 1.20

PMWM-35 3.5 0.70, 0.90, 1.00

PMWM-40 4 0.60, 1.00, 1.20

PMWM-45 4.5 0.70, 0.90, 1.80

PMWM-50 5 0.70, 1.20, 1.60, 2.00

Items Mesh size mm Wire diameter, mm

PMWM-60 6 0.70, 1.20, 2.00

PMWM-70 7 0.70, 1.20, 1.80

PMWM-80 8 0.70, 1.20, 1.60, 2.00

PMWM-90 9 1.00, 2.00, 2.20

PMWM-100 10 0.7, 0.8, 1.00, 2.00

PMWM-120 12 0.8, 1.00, 1.20, 2.00

PMWM-140 14 0.8, 1.00, 1.40, 2.00

PMWM-160 16 1,60. 2,50

PMWM-180 18 1.80, 2.50

PMWM-200 20 1.60, 2.00, 2.50

In construction, usually use plaster mesh fabric with mesh size from 8mm to 14mm, for

example, 12×12×1.0mm, 12×12×1.2mm, 14×14×1.2mm and 14×14×1.4mm woven

mesh fabrics are the most often used.

Plastering

soft woven wire mesh fabric in black color

Rolls of

black soft woven plaster mesh in our warehouse

Our plastering woven mesh is producing under strictly quality control: interlacing wires

warp and weft woven in a grid must be right, no skip wires, no mechanical damage, kinks,

broken and stitched seats.

Packing woven mesh

Rolls of fabric mesh must be annealed wire tied around the edges and the middle of the

roll. The ends are wrapped with a paper roll, then the polymer film or fabric packaging.

Usually, A roll weight no more than 80 kg.