KERA® – the material for your special needs
Phenolic (or furan) resin-based thermosetting plastic material, reinforced with glass fibre and/or carbon fibre with special mineral fillers
Excellent resistance to non-oxidising acids and many solvents
Suitable for use at a service temperature of up to 140 °C, max. 170 °C while maintaining constant stability
Unlimited design possibilities, multi-cavity moulds made from steel or wood / press moulding dies for series production parts
Joins, adaptations and repairs with special assembly compounds with similar properties
Very good emergency running properties
Columns, vessels and pipelines in the chemical industry
Absorbers, bubble cap and Thormann trays, distributors and exchange plants for regeneration and concentration processes
Treatment baths for synthetic fibers
Roll elements for process plants
STEULER-KCH GmbHBerggarten 1 | 56427 Siershahn | GERMANY
Phone +49 2623 600-410 | Fax +49 2623 600-670E-Mail [email protected] | www.steuler-kch.com
KERA® SP 20 and KERA® SP 30Especially resistant to non-oxidising acids and many solvents.
KERA® SP 21Particularly suitable for use with with highly flammable substances and hydrogen fluoride-containing media.
KERA® FU 23Material based on furan resin, reinforced with carbon fibre for alkaline conditions.