KEYSPLINE ENGINEERING LTD GEAR & TRANSMISSION SPECILISTS STATION WORKS, MASBROUGH STREET, ROTHERHAM, S60 1HT Tel: 01709 559933 Fax: 01709 513011 Email: sales@keyspline.com Website: www.keyspline.com

We would like to introduce our company to you. Keyspline is a Rotherham based company

founded in 1981specialising in the manufacture of precision gears, transmission components and general

engineering to a high standard. Our selection of rare capacity machinery allows us to produce both

external gears and internal gears along with large splined shafts on a “complete supply” or a “gear-cut

only” basis. Other specialities are reverse engineering from worn transmission components.

For more information please contact:

Jim Woodhead, Works Manager.

01709 559933

GEAR GRINDING CAPACITY

NILES 630 C3P

Tip and root relief and crowning facility

1 mod to 14 mod pitch

30 m/m min dia. To 700 m/m max. dia. X 215 m/m face

Profile grinds teeth on spur and helical gears to 45 helix

NILES 315 C3N

Tip and root relief and crowning facility

1 mod to 12 mod pitch

30m/m min dia to 350 m/m max dia

Profile grinds teeth on spur & helical gears.

This machine also has the facility to grind taper or conical gears.

KLINGELBERG PSFU 640 INVOLUTE & HELIX TESTER

Module 0.1 - 20

Lead 0º - 90º

Face 250 m/m

Max gear dia 640 m/m

GEARCUTTING MACHINERY CAPACITY

SUNDERLAND G 150 GEAR PLANER

Cuts Spur & Helical Gears 60” o/d 12” face l.5 DP max. pitch

Cuts Double Helical Gears 60” o/d 18” face 2 DP max. pitch.

SUNDERLAND 16

2 DP 32” o/d x 6” face

Cuts Spur/Helical Gears and Sprockets

SUNDERLAND 5

3 DP 24” o/d x 4” face

Cuts Spur/Helical Gears and Sprockets

FELLOWS 30

2 DP 54” o/d x 9.5” face. This machine has 33” riser blocks and cuts

internal and external Straight Spur, Combination Gears and Sprockets.

Admits 40” under cutter. 8” hole in table allows shafts up to 8 ft long.

LORENZ 1000 GEAR SHAPER

3 DP 39” o/d x 31½” i/d x 8” face. This machine has 43” riser blocks and cuts

internal and external Straight Spur, Combination Gears and Sprockets.

Admits 53¼” long shaft under cutter.

FELLOWS 36

3 DP 40” o/d x 8” face. This machine has 18” riser blocks and cuts

internal and external Straight Spur, Combination Gears and Sprockets.

Also cuts racks 8” face 3 DP.

FELLOWS 6A x 2

4 DP 24” o/d x 6” face. This machine has 16” riser blocks and cuts

internal and external Straight Spur and Combination Gears and Sprockets.

GLEASON 24 STRAIGHT BEVEL GEAR GENERATOR

l.25 DP 36” o/d x 6” face. Cuts Coniflex Bevel Gears

GLEASON 14 STRAIGHT BEVEL GEAR GENERATOR

3 DP 24” o/d x 4” face. Cuts Coniflex Bevel Gears.

LEES BRADNER HH 144 HOBBING MACHINE

30" Over bed 20” Over saddle 1DP x 144” long

Cuts Splines, Gears, Wormshafts

REINECKER HORIZONTAL GEAR HOBBER

21" Over bed 10" Over saddle 160" Between centre's.

CRAVEN HORIZONTAL GEAR HOBBER

(1/2)".5DP 40" o/d 240" long

Spur Helical and Double Helical.

LORENZ HEAVY DUTY HOBBING MACHINE

2 DP 36” o/d x 15” face.

Cuts Spur and Helical Gears, Wormwheels and Crowned Gears.

HECKERT HOBBING MACHINE

3 DP Swings 22” over bed, 10” over saddle. 88” between centre’s.

Cuts Splines and Spur and Helical Gears.

PFAUTER HOBBING MACHINE

3 DP Swings 12” o/d 36” between centre’s.

Cuts Splines and Spur and Helical Gears and Wormwheels.

BARBER COLEMAN HOBBING MACHINE

3 DP Swings 16” o/d 56” between centre’s.

Cuts Splines and Spur and Helical Gears and Wormwheels.

LEES BRADNER WORMSHAFT HOBBING MACHINE

Cuts Wormshafts 2 DP 12” o/d. 36” between centre’s.

SYKES V400

4 DP 15”o/d 4” face

Cuts internal & external Straight Spur Gears

SYKES V10 2 x MACHINES PLUS RACK ATACHMENT

5 DP 12” o/d 2.75” face.

Cuts Straight Spur Gears and Racks.

HEY 20 TOOTH CHAMFERING MACHINE

2 DP 20” o/d

Machine chamfers and tooth rounds gear teeth.

BARBER COLMAN 16 X 56 GEAR & SPLINE HOBBER

16” dia. X 56” long max. 3 DP max. pitch

TURNING CAPACITY

GORATU CNC GHT 4 CENTRE LATHE WITH FAGOR CONTROL 8055

Swings 28” over bed 120” between centre’s 18" over saddle

DSG CNC CENTRE LATHE WITH FAGOR CONTROL

Swings 24” over bed 100” between centre’s

GORATU CNC GHT 5 SIEMENS SHOP TURN 840D

Swings 40" over bed 263/4" over saddle 120" between centre's

HERBERT 9C30 COMBINATION LATHE

Swings 30” over bed 20” over saddle 120” between centre’s

HERBERT 8 COMBINATION LATHE X 2

Swings 18” over bed 12” over saddle

DEAN SMITH & GRACE 1910 TOOLROOM LATHE

Swings 19” over bed 10” over saddle 40” between centre’s

36” WEBSTER BENNETT VERTICAL BORING MACHINE

Swings 40” 30” under beam

HOLBROOK TOOLROOM LATHE

12” centre height 60” between centre’s

ALL LATHES HAVE DIGITAL READOUT

GENERAL ENGINEERING CAPACITY

KEARNS RICHARDS HORIZONTAL BORING MACHINE

Table Travel 36” Cross Travel 27” Height Travel 27”

HURON MU6 UNIVERSAL MILLING MACHINE

Table Travel 60” Cross Travel 27” Height Travel 20”Fitting with digital

readout.

ASQUITH 4 FOOT RADIAL ARM DRILLING MACHINE

SLOTTING MACHINES

FROMAG 1250 X 125

Cuts internal keyways and splines up to 5”(125mm) wide x 49¼” (1250mm) long

Max diameter 71” (1800mm) o/d

FROMAG 750 X 100

Cuts internal keyways and splines up to 4”(100mm) wide x 30”(762mm) long

LUNN DAVIS KEYSEATER

Cuts internal keyways 1.25” wide x 6” long

MINGANTI SLOTTING MACHINE 20” STROKE

8” BUTLER TOOLROOM SLOTTER

GRINDING MACHINES

CHURCHILL UAC INTERNAL GRINDER

Swings 56” (1422mm) o/d x 18” (460mm) long

Internal dia from 1” (25mm) to 50” (1270mm)

CHURCHILL CYLINDRICAL GRINDER

16” (406mm) o/d 48” (1220) between centre’s

CHURCHILL INTERNAL GRINDER

Swings 30” (762mm) 10” (254mm) long

DELAPENA BEAMSTROKE HONING MACHINE

2” (50mm) to 24” (609mm) internal dia x 30” (762mm) stroke

SNOW GRINDER

18” (460mm) rotary table surface grinder

NEWALL CYLINDRICAL SWINGS

17" DIA 96" between centre's

EXAMPLES OF PREVIOUS WORKS

Splined shafts up to 20”(500mm) dia x 144”(3700mm) long

Crowned Gears: max dia 36” (900mm) 1.5 DP

Gear grinding max pitch 14 mod, max dia 630mm, max face width 215mm. 2 machines capacity,

1 machine has swivel head to grind taper or conical gears.

Internal gears 1.5 DP 9.5” (241mm) face width, max dia 54” (1370mm)

Internal Straight Sided Splines up to 5” (125mm) wide x 48” (1220mm) long

An Internally Splined Planet Carrier

A Keyed Drive shaft with Internal Spline.

Internal & External Helical Gears

Gear grinding max pitch 14 mod, max dia 630mm (24¾”), max face width 215mm (8½”)