Important: Keep for future reference, read carefully
Instruction Manual
tatePram and Pushchair
2 3
Tools required
Flat-bladed screwdriver
parts
A
E
I
B
F
J
C
G
K
D
H
L
includ
ednot
parts
A
D
H
I
G
BC
assembly assembly
4 5
1
A
Unfolding
click
2
assembly assembly
6 7
click
3
1
2
4
click
C x2 A
Front wheels
assembly assembly
8 9
click
5
A
B
Rear wheels 6 Attaching the seat unit
in use
11
assembly
10
click
7
D
8 Bumper bar
click
H
The bumper bar is for use in stroller mode only.It is not a carrying handle.
assembly assembly
12 13
9 Removing the bumper bar
1
1
2
10 Attaching the hood
I
click
in use in use
14 15
2 Change to rear facing
2
1
1 Swivel wheel lock
in use in use
16 17
43 Extending the hood
click3
in use in use
18 19
5 Adjusting the handlebar 6 Adjusting the backrest
1
2
in use in use
20 21
87
2
1
in use in use
22 23
9 Using the buckle 10
click
in use in use
24 25
11 12Adjusting the harness
Always adjust the harness to fit your child correctly for their comfort and safety; a loose fitting harness can be dangerous.
in use in use
26 27
13 Using the brake 14
click
Change to pram mode
in use in use
28 29
15 16
2
1
Remove bumper bar when in pram mode.
in use in use
30 31
17 18
If the liner is not to be used, the child must be restrained with the harness, and the harness must be correctly adjusted.
in use in use
32 33
Attaching the pram liner
K
19 Attaching the pram apron
click
click
E
I
20
Never use pram in forward facing mode.
in use in use
34 35
Changing the pram to seat unit2221 Extending the hood
click
click
in use in use
36 37
24
click
23
2
1
in use in use
38 39
25 Attaching the raincover
J
26
2
1
in use in use
40 41
Attaching an infant carrier27 28
in use in use
42 43
29 30
Never use infant carrier in forward facing mode.
folding folding
44 45
Folding the pushchair1 2
folding folding
46 47
3
click
4
1
2
3
54
Keep child away whilst folding pushchair.
disassembly
49
folding
48
5 Carrying the pushchair Remove front wheels
!
1
1
2
3
disassembly disassembly
50 51
Removing the basketRemove rear wheels 32
1
2
disassembly
52
4
safety safety
This pushchair is intended for children from birth to approximately 3 years, maximum weight 15kg.Seat mode is not suitable for children under 6 months.Pram mode should be used for newborn babies.This product conforms to BS EN 1888:2012.
WARNING! Never leave your child unattended. WARNING! Ensure all locking devices are engaged before use. WARNING! Do not let your child play with this product. WARNING! In stroller mode, always use the restraint system. Always use the crotch strap in combination with the waist belt. WARNING! This product is not suitable for running or skating. WARNING! Check that the pram body / seat unit attachment devices andinfant carrier are correctly engaged before use. WARNING! Any load attached to the back of the backrest or sides of the stroller will affect the stability of this vehicle. Bags and other items should not be hung from the handles. A basket is provided for the carriage of 4.5kg evenly distributed. WARNING! To avoid injury, ensure that your child is kept away when folding, unfolding or making adjustments to this product. WARNING! In pram mode, use a harness as soon as your child can sit unaided.
Additional Information• Do not allow your child to climb into the pushchair unassisted.• Always use the harness if it is not covered by the liner.• Apply the brake before putting your child into or removing from the pushchair.
Always apply the brakes when the pushchair is stationary.• This pushchair is designed to carry one child only.• For extra safety in pram mode, D-rings are provided for the attachment of a
separate safety harness approved to BS EN 13210.• Overloading, incorrect folding and the use of non-approved accessories may
damage or break this pushchair.• Never leave the raincover or footmuff on indoors, in a hot atmosphere or near a
heat source as your child may overheat.• Do not overload this pushchair with additional children, goods or accessories.• Be careful when going up or down kerbs. Remove your child and fold the pushchair
when going up or down stairs or escalators.• When used with an infant carrier, this vehicle does not replace a cot bed. Should
your child need to sleep, it should be placed in a suitable pram body, cot or bed.• Only replacement parts supplied or recommended by the manufacturer or
distributor shall be used.• Do not use an additional mattress.• Accessories not approved by the manufacturer are not to be used.• The seat unit should only be used with the Tate chassis.• Only use infant carriers recommended by the manufacturer.
care
kiddicare
Maintenance• This pushchair requires regular maintenance by you.• Regularly inspect the locking devices, brakes, harness assembly, catches, joints and
fixings to ensure they are secure and in full working order.• Brakes, wheels and tyres are subject to wear and should be replaced if necessary.• Should parts of your pushchair become stiff or difficult to operate, ensure that dirt
is not the cause. Then try a light application of a silicon-based lubricant, ensuring that the lubricant penetrates between the components, but do not over spray as this may encourage the accumulation of dirt. Regular lubrication of moving parts will extend the life of your travel system and make opening and folding easier.
• Your pushchair should be serviced and reconditioned before using for a second baby, or within 18 months, whichever is sooner.
• Make sure that the pressure of all the tyres is correct. This means that the pushchair will ride more easily and prevents damage to turning and hinged parts.
• Inflate rear tryes to a maximum pressure of 26PSI (1.8Bar). The tyres are equiped with a ‘Car type valve’ and can be inflated using the pump provided.
• To prevent damage, remove the raincover before folding the pushchair.• Do not place anything on top of the raincover.• Wheels should be checked and cleaned regularly. Remove any mud or other
detritus that has collected as this may prevent the locking system from locking properly.
Cleaning• The raincover can be cleaned by sponging with warm water and a mild detergent.• Never clean the raincover with abrasive, ammonia based, bleach based or spirit
type cleaners.• Plastic and metal parts may be sponged clean with warm water and mild detergent.• Refer to sewn in labels for fabric care instructions.• Allow to dry thoroughly before storing.• Wheels should be checked and cleaned regularly. Remove any mud or other
detritus that has collected as this may prevent the locking system from working properly.
• After exposure to damp conditions, leave fully opened and in a warm environment. Dry off with a soft cloth. Storing a damp pushchair will encourage mildew to form.
• Store your pushchair in a dry safe place.
Customer Care: [email protected]
Kiddicare,Club Way,Cygnet Park,Hampton,Peterborough,Cambridgeshire PE7 8JA