The 4th Generation of Kingkong Stadium P10

960 mm

180mm

1280mm

65Fast installationSide lock design

contribute to fast and convenient installation.

low Power ConsumptionHigh brightness LED is driven with low power to reduce the screen heat to near by 50%

High brightness

R.G.B brightness 256 Levels are adjustable

as you wish

Angle Adjustable

The screen can beadjusted in any angle

IP65IP65 waterproof

and dustproof.

01

Function Advantage

1. Scientific Cabinet Design

Function Advantage

2. Adjustable Holder

Designed for court, flexible holder, good looking and practical.

The angle can be adjusted according to your requirement

The holder can be fold into the cabinet, no room wasting

02

The buffering mask specialized at the application of football court

3. Buffering Mask

03

Function Advantage

4. Perfect Assembly EffectSBC screen can be totally changeable to meet the needs of customer，better than DLPand MLCD。No segmentation phenomenon as DLP or MLCD but vivid and exquisite image will be shown.

04

Function Advantage

Appling soft arc-shaped cap to protect the screen from the impact of football.

5. Soft Arc-shaped Cap

05

Function Advantage

06

6. Waterproof Design

Accord with IP65 protection standard, against all kinds of bad weather, suitable for outdoor stadium.

Function Advantage

Function Advantage

7. Screen Low Heat, Good Heat Dissipation

High brightness LED driven with low power consumption that reduce the heat of the screen near by 50%

（0.18-0.10 )/0.18=44% the heat of the whole screen

can be reduced near by 50%.

Specification of a Single LED: before and after improvement

Low brightness but large current

LED high power consumption

Ordinary glue

LED old technology:

High heat of the whole

Screen.

Import glue

LED new technology：

Heat of the whole

screen is reduced 50%

LED low power consumption

High brightness but small current

VS

Parameter

IR（Red Lights Current）

IG（Green Lights Current）

IB（Black Lights Current）

WV（Working Voltage）

Power（Power Consumption）

Before

16mA

15mA

12mA

4.2V

0.18W

Now

10mA

8mA

6mA

4.2V

0.10W

07

Impacts on constant-current from voltage change is only 1%

Function Advantage

7. Low Power Consumption LED

Extreme Low output

Current of Driver IC

The working voltage of IC is only 4.2 V

Minimum IC out constant-current is only about 20 mA

The output constant-current differences between channels is only 1.5%

Single lamp driving current is verylow( within 20 mA), so that reduce the LED’s overall power consumption

08

The harmonics which doesn’t use PFC power The harmonics with PFC power

100

90

80

60

50

20

10

0

200

180

160

140

120

100

40

80

3060

40

20

0

Ams

50.0 150.0 250.0 350.0 450.0 550.0 650.0 750.0 850.0 950.0 1050.0 1150.0 1250.0

Corrent 21 Corrent 21

Ams

50.0 149.9 249.8 349.8 449.7 549.6 649.6 749.5 849.5 9494 1049.3 1149.3 1249.2

Function Advantage

8. High Efficient PFC Energy Saving Power

09

Power factor： ≥ 98%Increase the power factor by reducing the phase differences between the inputAC fundamental current and voltage of the switch . The power factor of PFC power is more than 98%, and the efficiency can be 90%.PFC power take a full advantage of power and reduced the screen's energy loss (Average power consumption is only 300W/m²). In terms of this, PFC power improves the electricity using efficiency, and saves money for you.

External Sending CardControl Computer

Light Probe

Screen

Multi-function Card

/ Asynchronous Card

Function Advantage

9. Brightness Self-adaption

≥ 5000cd/㎡, the current through the LED can be adjusted by software to realize the automatic adjusting of the brightness.

DVI

RS232

10

Ordinary grey level Our grey level can achive16Bit，highly improve the graphic quality 。

Features

10. High Grey Level：65536 Level

※Color temperature is adjustable according to your requirement.。※Enhance the gray-scale level effectively，※The photo were more layering，and the graphic were more clear and exquisite.

11

Technical advantage

1. High Contrast 1000:1

White and Black Testing Schematic Comparison

Test Formula: (Screen Brightness – Environment Brightness)/ Environment Brightness =Contrast Rate

Our company's unique black mask processing makes the screen to get a high contrast;

Black mask also can improve LED light uniformity, reduce every LED lamp's sidelight lighting factor, so thatthe screen can get uniform brightness.

12

LED display with the mask (dark black)

LED display without the mask(grey)

Chromaticity point -by – point correction effect comparison

Technical advantage

Before After

※Brightness differences ＜2%, chromaticity differences＜0.005※Less brightness sacrifice（only 5%-8%)

13

2. Chromaticity Point-by-point Correction

Technical advantage

3. Batch Matching

Before

After

14

Batch matching: When there are different batches LED lamps in one screen, the image effect is bad; batch matching collect LED

brightness, chromaticity and wavelength, and find out the common gamut and then adjust the different color gamuts to the

common one, so that we can use different batches LED lamps in the same LED display.

Technical advantage

4. Gamut Conversion

Before

After

15

Gamut conversion: when a part of LED display appears unreal natural phenomena, using the light gun to get the original color gamut and convert it to the target color gamut and that makes the final image color more close to real and natural.

Technical advantage

5. No “Ghosting”

Common LED Display "Ghosting" is very bad, image is filmy , there is twilight when testing.

SBC LED products are made with recharged function LED driver IC. The driver IC cam completely eliminate the "ghosting" and twilight.

17

18

6. High Refresh Rate: ≥1000Hz, Adjustable by Software

SBC LED screen use the leading technology, dynamic scanning methods and the refresh rate is higher than 1000Hz.There is no wave line when the screen displays videos. It can satisfy the upmarket occasion's applications and matchthe scene atmosphere perfectly.

Technical Advantage

High refresh rate ≥2440Hz, the image is stable and clear.

Camera: Canon, the shutter speed is 1/1250s.

Refresh rate is 300~600Hz, the image is flashing.

Camera: Canon, the shutter speed is 1/1250s

2015-3-18

Specification

Best View Distance (m) ≥30m

Pixel Pitch (mm) 10mm

Pixel Resolution (Dots/㎡) 10000Dots/㎡

Pixel Color Composition SMD3528 3 IN 1

Cabinet Sze 1280*960*150MM

Cabinet Weight 46KG

Brightness (cd/㎡） ≥1800cd/㎡ adjustable by software

Refresh Frequency (Hz) ≥1000Hz adjustable by software

Max. power Consumption (W/㎡） 3500W/m²

Ave. Power Consumption (W/㎡） 3 300W/m²

View Angle 120°horizontally, 120°vertically

Grey Level/Color 16.7M colors(Synchronized）

IP Level IP43

Defects Rate ＜1/10000Dots

Life Span(H） ＞100000H

Operating Temperature -20℃ ～ +60℃

Operating Humidity 10%RH~90%RH

Storage Temperature -20℃ ～ +70℃

System Operating Platform WIN 98/ 2000/ XP

Control PC With DVI Graphic card ( brand PC recommended)

Video Signal RF/S-Video/RGB/RGBHV/YUV/YC/etc.

Effective Control Distance Without Re

peater

Unshielded Twisted-pair LAN cable transmission within 100m

Multi-mode optical fiber≦500m,mono-mode optical fiber≦20km

Specification

19