KINGWELL OILFIELD DST
KINGWELL OILFIELD DST
GEOGRAPHICAL SPREAD & CONTACTS
Canada Libya Iraq
Yemen Iran
QatarUAE MainOffices
India
Oman Saudi Arabia
U.A.E
Egypt
TanzaniaBangladeshKuwait
Malaysia
Russia
PRODUCE&SERVICES PROVIDED
hOIL & GAS PRODUCTION/EXPLORATION WELL TESTING
hPRODUCED WATER TREATMENT
hINTEGRATED WELL SERVICES
hDRILL STEM TESTING
hPROCESS ENGINEERING AND DESIGN
hPVT and CORE ANALYSIS
EQUIPMENT
Test SeparatorOffshore Burner BoomOnshore Burner BoomGreen Burner HeadChoke ManifoldOil / Gas Manifold ESD PanelSafety ValveHeaterFlexible HoseLab CabinSCADAElectronic Data AcquisitionLoading GantryCrude Oil Storage TankOil Re-Injection PumpMobile well Test Packages
Surge TankPressure TankVertical Flare StackWater Treatment UnitHT 400 TRIPLEX PUMPMulti-Stage PumpPressure Test SystemAir compressor and GeneratorAcid Neutralization UnitChemical Injection PumpDuplex Cartridge Filter UnitHydro cyclone and AccumulatorSkid Strainer Package Sand Monitoring SystemSurface Test TreeTransfer PumpAcid Pumping Unit
SURFACE TEST TREE10k and 15k
Surface Test Tree Complete with the following;
Master Valve
Kill Valve
Crown Valve
Wing Valve: hydraulic operated
Swivel assembly
Certified for sour service
Connections
Existing 5”- 4 Stub ACME - 2G Box on top of Flow Head
Stiff Joint top 4-1/2” EUE Pin (available)
Crossover 4-1/2” CS Hydril Pin top (available)
Crossover 3-1/2” PH-6 Hydril Pin top (available)
Emergency Shut Down Valve
3” X 5K , 10k and 15k Hydraulic valve Certified for Sour Service
SAFETY VALVE
ESD PANEL
HYDRAULIC & PNEUMATIC
Equipped with remote shut downstations enabling complete shutdown of the well in an emergency
CHOKE MANIFOLD
3” X 5K, and 10K, and 15 K Choke ManifoldsEquipped with Adjustable and Positive Chokes
Designed with four gate valvesCertified for Sour Service
OIL AND GAS MANIFOLD
3” X 5 Way Oil Manifold (1500 PSI WP)
3” x 3 Way Gas Manifold (1500 PSI WP)
NACE - MR-01-75
TEST SEPARATOR
Three Phase Test Separator
2160 PSI, 1440 PSI, 720 PSI
Equipped with Safety Relief Valves and Necessary Instrumentation
Certified for Sour ServiceNACE MR-01-75 ASME
HEATER
2MM BTU/Hr and 4MM BTU/Hr . Line Heater Diesel / Gas Fired
3” X 5K
KINGWELL OILFIELD DST
HEAT EXCHANGER 5 MM BTU/HR.
Heat Exchanger
5MM BTU/hr
3” x 10K
With adjustable choke & steam generator
BURNER BOOM
Offshore Burner Booms
60’ and 90’ lengths
Equipped with Electronicignition.
Equipped with Green Burner Heads, each capable of handling 5000 bbls/d
ONSHORE BURNER BOOMS
Available on 15’ skids
Complete with GreenBurner Heads for clean and efficient burning
Electronic ignition andcontinuous pilot
KINGWELL OILFIELD DST
KINGWELL OILFIELD DST
STEAM GENERATOR
The CLAYTON Steam Generator is manufactured in conformance
with the American Society of Mechanical Engineering (ASME) Power Boiler Code, Section I
Manufactured by : CLAYTON INDUSTRIES
Model No. E-200 Steam Heat Generator
HP FLEXIBLE HOSE
· ID = 3” (76.20 mm) · OD = 5.65” (143.50 mm) · Minimum bending radius
- for storage 0.88 m - in service 1.32 m
· Weight (in air empty) = 49 kg/m · Working Pressure = 10,000 psi · Test Pressure = 15,000 psi · Working Temperature = -20oC/+100oC · Bureau Veritas witnessed and certified
24 hours pressure test · Lifting/Handling collar at each end
Length = 60 feet (-0/+2 feet)
KINGWELL OILFIELD DST
LAB CABIN
Skid Mounted Lab
Onshore & Offshore Operations
Equipped with NecessaryAccessories and Instrumentation forWell Testing Services
Zone IZone II
KINGWELL OILFIELD DST
KINGWELL OILFIELD DST
CRUDE OIL STORAGE
Skid Mounted Tanks400 BBLS Capacity
Equipped with Sight Glasses and Vent Lines
SURGE TANK
100 bbls capacity
100 psi w.p.
Equipped with sight glasses
Fluid Accumulation and degassing
SURGE TANK
Skid Mounted
50 bbls Capacity
50 psi W.P.
Designed for fluid accumulationand measurement during the testing of low producing wells
Useful for Meter Calibration
VERTICAL FLARE STACK
60’ and 100’ High
Equipped with electronic ignition
8” gas line
3 - 4” vent lines
Certified for sour service
KINGWELL OILFIELD DST
PRESSURE TEST SYSTEM
MWP of 20K psig
Rate of 15 Gal/min
Power 460 Volt
Cycle 60 Hz
Current 50 Amps
KINGWELL OILFIELD DST
CHEMICAL INJECTION PUMP
Unit with Dual HASKEL Pumps and Relief ( G-series-100 )
Air drive system (Min . 15 psi , Max. 125 psi)
1’’ ID inlet fluid supply pipe
Max. output pressure : 10000 psi with 3 GPM
Stainless steel frame
HYDROCYCLONE & ACCUMULATOR PACKAGE
Design Pressure 15000 psi
Design Temperature 50 to 250 F
Flow Rate 5000 bbls/d @ 30 MMSCF/D
500 bbls/d @60 MMSCF/D
Filter 25 microns
Skid Strainer Package (15 K)
Design Pressure : 15,000 psi ( @ 350 F)
Design Temperature : 50 – 350 F
- The Y-Type strainer is used to remove solids from the process stream and is normally connected downstream of the hydrocyclone
TRANSFER PUMP
Power 460 V & 60 Hz
NACE MR- 01-75
Maximum Flow Rate 5,000 BPD and 10,000 BPD
50 PSI Discharge Pressure
60 HP Explosion proof motor and starter switch
Skid mounted
This pump is used to transfer oil/diesel
KINGWELL OILFIELD DST
ACID PUMPING UNIT Plunger Size 3-1/2” Plunger Size 4-1/2”
Maximum Working Pressure Maximum Flow Rate Minimum Flow Rate Maximum Working Pressure Maximum Flow Rate Minimum Flow Rate
: 10,394 psi : 273 GPM @ 700 psi : 55 GPM @ 4500 psi : 6,288 psi : 312 GPM @ 700 psi : 96 GPM @ 4,500 psi
§ Batch Mixing and Blending Skid with 2 x 60 barrel Blending Tanks complete with Acid Additives
§ Complete set of 3” / 2” x 5000 psi WP and 3” / 2” x 10,000 psi WP Piping, Elbows, Chicksans & X-Overs.
§ 3” x 10,000 psi WP Coflexip Hoses (H2S, CO2 and Acid Service) § Laboratory with complete test facility equipment
KINGWELL OILFIELD DST
OFFSHORE AND ONSHORE
DST SERVICES PROVIDED
hCASED HOLE hFULLBORE DRILLSTEM TESTINGhSLIM HOLE DRILLSTEM TESTING
hCONVENTIONAL ( MECHANICAL ) DRILLSTEM TESTING
hOPEN HOLE CONVENTIONAL ( MECHANICAL ) DST
KINGWELL OILFIELD DST
Drill Stem Testn RTTS Packern The RTTS packer is a full-opening, hookwall packer used for testing, treating, and squeeze cementing operations. In most cases, the tool
runs with a circulating valve assemblyn RTTS Safety Jointn The RTTS safety joint is an optional emergency backoff device. The safety joint releases the workstring and tools above the packer if the
packer becomes stuck during operationsn FUL-FLO Hydraulic Circulating Valven The FUL-FLO hydraulic circulating valve serves as a bypass around the packer or as a circulating valve to circulate a well after testingn Internal Pressure-Operated (IPO) Circulating Valven The internal pressure-operated (IPO) circulating valve is a single-shot circulating valve which allows circulation through the workstring
before trip-out and serves as a drain valve during trip-out. It can be run in cased holes or openholes and maintains a full bore through the tool
n Repetitious Circulating Valven The Repetitious circulating valve is an annulus pressure- operated, recloseable circulating valve. Throughout the operation, the tool is
repeatedly cycled up to a predetermined annulus pressure and then releasedn RTTS Circulating Valven The RTTS circulating valve is a locked-open/locked-closed valve that serves as both a circulating valve and bypassn Rupture Disk (RD) Safety Circulating Valven The rupture disk (RD) safety circulating valve functions as both a safety valve and circulating valven Tester Valven The Pressure Operated tester valve is a full- opening, annulus pressure-operated valve. It measures multiple closed-in pressures in cased
holes where pipe manipulation is restricted and a full-opening string is requiredn Test Tools Select Tester Valven The Select Tester valve is a full-opening, annulus pressure-operated tooln Tubing String Testing (TST) Valven The tubing string testing (TST) valve is a full-opening valve used to pressure-test the workstring while running in the holen Rupture Disk (RD) Tubing String Testing (TST) Valven The rupture disk (RD) tubing string testing (TST) valve is a full-opening valve used to pressure test the workstring while running in the holen Round Mandrel Slip joint
KINGWELL OILFIELD DST
Drill Stem Testn The rupture disk (RD) tubing string testing (TST) bypass valve is a weight- activated,
normally open valven Shock Absorbern Shock absorbers protect pressure-measuring equipment or other sensitive components in the
workstring for shock loads transmitted through the workstring by firing of TCP gunsn Hollow Plug Impact Reversing Subn The hollow plug impact reversing sub is used in the more difficult operations where depth and
high-pressure differential across the plug sometimes make it difficult to open a conventional reversing sub
n HYDROSPRING Testern The HYDROSPRING tester was developed to provide a reliable and field-proven downhole
master valven VR Safety Jointn The VR safety joint is a compact, right- hand safety joint used in the drillstem testing stringn Normal Technical requirementsn Pressure:70Mpa(10000PSI) 105MPA(15000PSI)n Temperature:400Fn Service: Inner H2S,Full H2Sn Connection thread: As per API or requirements
KINGWELL OILFIELD DST
The Packer is Set
Annulus Pressureis Applied to
Openthe Tester Valve
Several methods can be used to
Fire TCP GunsThe Well will thenbe flowing
Releasing the Annulus Pressure,
Closes the Tester Valvefor a Build Up
At the end of the Test any of the Circulating Valves may be used toReverse Out the String
Fullbore TCP / DST / Well Test in Casing
KINGWELL OILFIELD DST
33
Full Bore and Slim Hole
DST Tools
Full Bore MC Tester Valve
Full Bore Gauge Carrier
Full Bore Hydraulic Jar
Full Bore Expansion Joint
Full Bore Safety Joint
Full Bore Test Packer
TY
PIC
AL
FU
LLB
OR
E D
ST
AS
SE
MB
LY
Full Bore SS Exit Valve
Full Bore MC Circulating ValveKINGWELL OILFIELD DST
PORTED SUB
FU LL BORE CASING PACKER
FU LL BORE SAFE TY JOINT
FULL BORE H YDR AULI C JAR
FU LL BORE TESTER VALVE ,
FU LL BORE CIRCULATING VALVE,
FULL BORE KILL VALVE,
CA SING
FULL BORE GAUGE CARRIE R,
FU LL BORE CIRCULATING VALVE,
DR ILL COLLAR
DR ILL COLLARS
DR ILL PIPE
PR ESSURE TRANSFER SUB
AD APTER SUB
BELOW PACKER SAFETY J OINT
TU BING JOINT
SH OCK ABSORBERTU BING JOINT
HY DRA ULIC FIRING HEAD
BLANK SAFETY SPACER
LOADED & B LANK PERF GUN
BU LL NOSE
R/A MARKER SUB
FU LL BORE CIRCULATING VALVE,
DR ILL COLLAR
FULL BORE GAUGE CARRIE R,
CA SED HOLE TCP / DST
SHOOT & TESTFULLBORE 2.25“ ID
TOOLS
FO
RM
AT
ION
TO
BE
TE
STE
D
FULL BORE CASING PACKER
FULL BORE SAFETY JOINT
FULL BOR E HYDRA ULIC JAR
FULL BORE TESTER VALVE,
FULL BORE CIRCULATING VALVE,
FULL BOR E KI LL VALVE,
CA S ING
FULL BOR E GAUGE CARRIER ,
FULL BORE CIRCULATING VALVE,
DRILL COLLAR
DRILL COLLARS
DRILL PIPE
R/A MARKER SUB
FULL BORE CIRCULATING VALVE,
DRILL COLLAR
FULL BOR E GAUGE CARRIER ,
RECORDER FLOW SUBW/ RECORDER S"O UTSIDE"
FLO W PORTS
CASED HOLE DST FULLBORE 2 .25“ ID
TOOLS
PER
FO
RATI
ON
S
3-1/8” OD x 1-1/8” IDfor use in 5”, 5-1/2” csg
5” OD x 2-1/4” IDfor use in 7”, 9-5/8” csg
15,000 psi350 deg F
RE CORDER FL OW S UBW/ RECORDERS"OUTSI DE "
FL OW P ORTS
DROP BAR REVERSE CIRCULATING SUB
DRILL COLLAR S
RECORDER C ARR IERW/ RECORDER"INSIDE"
C ROSSOVER SUB
T UBING PRESSURE ACTIVATEDR EVERSE CIR CULATING SUB
TESTER VALVE,SLIDI NG SLEEVE TYPE
SAMPLER
HYDRAULIC JARS
RECORDER C ARR IER W/RECORDER "INSIDE"
SAFETY J OINT
DRILL COLLAR SDRILL PIPE
PA CKER
RECORDER FLOW SUBW/ RECORDERS"OUTSI DE"
FL OW PORTS
DROP BAR REVERSE CIRCU LATING SUB
DRILL COLLARS
RECORDER CARRIERW/ RECORDER"IN SIDE"
CROSSOVER SUB
TUBING PRESSURE ACTIVATEDREVER SE CIRC ULAT ING SUB
SHUT-IN TOOL, ROTATIONALSLIDING SLEEVE TYPE
SAMPLER
HYDRAULIC JARS
RECORDER CARRIER W/RECORDER "IN SIDE"
SAFETY JOINT
DRILL COLLARSDRILL PIPE
BULL NOSEPERFORATED
PERFORATED ANCHOR(TAILPIP E)
TESTER VALVE,SLIDING SLEEVE TYPE
PACKER
RECORDER FLOW SUBW/ R ECO RDERS"OUTSIDE"
FLOW PORTS
DRIL L COLLARS
RE CORDER CARRIERW/ RECORDER"INS IDE "
SAM PLER
HY DRAULIC JAR S
RE CORDER CARRIER W/R ECO RDER "INS IDE "
SAF ETY JOINT
DRIL L COLLARSDRIL L PIPE
TES TER VAL VE,SLIDING SL EEVE TY PE
STRADDLE BYPASS
PACKER
PERFORATED ANCH OR( TAI LPI PE)
PACKER
PACKER
B ULL NO SE W ITH BE LO W S TRADD LER EC ORD ER
PERFORATED ANCH OR( TAI LPI PE)
SHUT- IN TOOL, ROTATIO NALSLIDIN G SLEEV E TYPE
STRADD LE BYPASSRECEIVE R
OPEN HOLECONVENTIONAL
BOTTOM HOLE TESTON PENETRATION
OPEN HOLECONVENTIONALSTRADDLE TEST
FO
RM
AT
ION
TO
BE TE
STE
D
PA CKER
RE CORDER FL OW S UBW/ RECORDERS"OUTSI DE "
CASED HOLE DST BAREFOOT TESTCONVENTIONAL
TOOLS
OP
EN
H
OL
E
CASING
FULL BOR E CASING PACKER
OP
EN
H
OL
E
OP
EN
H
OL
EO
PE
N
HO
LE
OP
EN
H
OL
E
5” OD Mechanical Toolsfor use in 8-1/2”, 12-1/4”Open hole
5” OD Mechanical Toolsfor use in 7”, 9-5/8” csg
KINGWELL OILFIELD DST
n The Select Tester valve is a full-opening, annulus pressure- operated tool. with applied pressure, the tool can be locked open and then returned to the normal operating sequence at any time. The ball valve operates independently of pressure changes from operations such as acidizing and fracturing. This gives the Select Tester valve greater compatibility and flexibility with other tools in the string.
Select Tester valve
5'' OMNI Valve
n Detailed Product Descriptionn Halliburton type OMNI Valve, all could change with Halliburton parts. DST circulating Valve 15000PSI above 175F H2S&Acid service
n The Repetitious circulating valve (OMNI Valve) is an annulus pressure operated, recloseable circulating valve. Throughout the operation, the tool is repeatedly cycled up to a predetermined annulus pressure and then released.
n n The Repetitious valve consists of a nitrogen section, an oil system, a circulating valve, and a ball valve. The nitrogen section contains the
nitrogen gas that counter balances the hydrostatic and annulus pressures.n n The amount of nitrogen in the tool depends on well hydrostatic (mud weight and depth) and downhole temperature. This information must
be known to properly prepare the tool for running in.n n Note: With certain completion fluids, the mud weight at the surface can be significantly different from the actual mud weight downhole.n n The operating and control mechanisms are contained in a closed oil system activated by annulus pressure acting on the nitrogen chamber,
allowing an unlimited number of pressure cycles. The circulating valve and the ball valve work together to keep circulating pressure off the formation. The ball valve will close before the circulating valve opens. The ball valve closes off the
KINGWELL OILFIELD DST
5'' LPR-N valven Detailed Product Descriptionn Halliburton type, all could change with Halliburton parts.Pressure Poerated
tester valve (LPR-N valve) is annulus operated valve
n The Pressure Poerated tester valve (LPR-N valve) is a full- opening, annulus pressure-operated valve. It measures multiple closed-in pressures in cased holes where pipe manipulation is restricted and a full-opening string is required. The nitrogen chamber is charged at the surface to a selected pressure determined by surface temperature, bottomhole temperature, and bottomhole pressure. If the intended test requires a permanent packer that uses a stinger mandrel or seal nipple, a variety of bypass tools are available, depending on field application, to help ensure that the formations and downhole equipment are
n protected from excessive pressure buildup.
KINGWELL OILFIELD DST
5'' RD Safety Circulating Valve n Detailed Product Description
n The rupture disk (RD) safety circulating valve functions as bothn a safety valve and circulating valve.
n The rupture disk (RD) safety circulating valve functions as both a safety valve and circulating valve. The tool functions as a safety valve when the annulus pressure reaches a predetermined value. At that pressure, the valve isolates the workstring below the tool and establishes communication between the annulus and the workstring above the tool. This tool converts into a circulating valve when the ball valve section is removed.
KINGWELL OILFIELD DST
RTTS Safety Joint
n 1.Halliburton type, all could change with Halliburton parts.
The RTTS safety joint is an optional emergency backoff device .The safety joint releases the workstring and
n tools above the packer if the packer becomes
stuck during oprations.
KINGWELL OILFIELD DST
5"Round Mandrel Slip Jointn 5"Round Mandrel Slip Joint
n Detailed Product Descriptionn 1.Halliburton type, all could
change with Halliburton parts.n 2.DST Round Mandrel Slip Joint
are H2S&Acid service.
n The round mandrel slip joint,like other slip joints, accepts the movement associated with ocean heave or
n temperature change without allowing the movement to disturb the placement of downhole tools.
n
DST TOOLS PARTS
KINGWELL OILFIELD DST
RTTS PACKER
KINGWELL OILFIELD DST
KINGWELL OILFIELD DST
n KINGWELL OILFIELD MACHINERY CO.LTDn TOP Oil Tools Suppliern Tel:(86-29)88601839 n Fax :(86-29)88601839n E-mail: jerrywang : [email protected] Linda: [email protected] SKYPE: xakingwelln MSN: [email protected]
KINGWELL OILFIELD DST