When the 1965 Mustang first appeared on the show-room floors, it was clear that Ford engineers had styled it to appeal to the widest cross-section of buyers pos-sible. Produced initially in hardtop and convertible ver-sions, the peak of Mustang design was reached in the 2+2 Fastback. The sporty, compact machine combined youthful exuberance and classic styling that made Mustang the best selling new car in automotive history.
The graceful contours of its front end were domi-nated by a grille-mounted, chrome running mustang that gave the car its name. The long hood, sculptured-side panels, sloping fastback, and kicked-up rear end provided the sporty flair and elegance for which the
Mustang is remembered today. Standard equipment on the Mustang consisted of a 120 horsepower six-cylin-der engine, bucket seats, floor mounted 3-speed trans-mission, sports steering wheel, full wheel covers and more. Select sports options included three V-8 engines developing up to 271 horsepower, front disc brakes, rally instrument package, and 4-speed. Your Revell kit of the Mustang 2+2 Fastback has been faithfully repro-duced using scale drawings and photographs that were originally provided from the Ford Motor Company.
‘65 Mustang 2+2 Fastback
this optional paint guide is provided if you choose to detail paint your model.
ce guide de peintures vous sera fourni si vous choisissez de peindre votre modèle en détail.
* Study the assembly drawings.* Each plastic part is identified by a number.* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome plated plastic.
* For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry.
* Check the fit of each piece before cementing in place.
* Use only cement for polystyrene plastic.* Scrape plating and paint from areas
to be cemented.* Allow paint to dry thoroughly before
handling parts.* Any unused parts may be discarded.
dEcAL APPLIcAtIoN INStRuctIoNS
1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and
slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any excess adhesive.
8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before
applying clear coat.
NotE: decals are compatible with setting solutions or solvents.
REAd tHIS BEFoRE You BEGIN LIRE cE QuI SuIt AVANt dE coMMENcER
* Etudier les schémas de montage.* Chaque pièce en plastique est identifiée par un numéro.* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant de la coller en place.
* N'utiliser que de la colle pour polystyrène.* Gratter les parties à coller pour enlever le chrome et la peinture.* Laisser la peinture bien sécher avant de manipuler les pièces.* Toute pièce inutilisée peut être jetée.
dIREctIVES d'APPLIcAtIoN dES AutocoLLANtS
1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQuE: Les autocollants sont compatibles avec les solutions de fixage ou les solvants.
5
6
3
note: Cut out deCal (9) and glue in plaCe using white glue
if you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:
revell inc Consumer service department, 1850 howard street unit a, elk grove village, illinois 60007be sure to include the plan number (85283520200), part number, description, your return address and phone number.
(paint sHaded area steel) 33distributorgloss black
★27oil pancHroMe
(paint gloss black)
28valve Cover
gold
29CYlinder head
gloss black
25engine halfgloss black
30intaKe manifold
gloss black
★31Carburetor
cHroMe
23starter
gloss black
35fan
gloss black
34fan beltflat black
36water pumpgloss black
★37alternator
cHroMe
43exhaust header
steel
42exhaust header
steel
41exhaustaluMinuM
steel
gloss black
17front suspension
seMi gloss black
13Chassis
seMi gloss black
16shoCK absorber
seMi gloss black
15shoCK absorber
seMi gloss black
14rear axle
seMi gloss black
20front
springseMi gloss
black
into engine
b
C
a a b
C
ed
Kit 2835 - page 4 Kit 2835 - page 5
ENGINE ASSEMBLY3 SuSPENSIoN ASSEMBLY428
valve Covergold
29CYlinder head
gloss black
26engine halfgloss black
(paint sHaded area steel) 33distributorgloss black
★27oil pancHroMe
(paint gloss black)
28valve Cover
gold
29CYlinder head
gloss black
25engine halfgloss black
30intaKe manifold
gloss black
★31Carburetor
cHroMe
23starter
gloss black
35fan
gloss black
34fan beltflat black
36water pumpgloss black
★37alternator
cHroMe
43exhaust header
steel
42exhaust header
steel
41exhaustaluMinuM
steel
gloss black
17front suspension
seMi gloss black
13Chassis
seMi gloss black
16shoCK absorber
seMi gloss black
15shoCK absorber
seMi gloss black
14rear axle
seMi gloss black
20front
springseMi gloss
black
into engine
b
C
a a b
C
ed
Kit 2835 - page 4 Kit 2835 - page 5
WHEEL ANd tIRE ASSEMBLY5 INtERIoR ASSEMBLY2
58inner wheel
flat black
200tire
★38wheel outer
cHroMe
★5instrument pod
cHroMe(paint sHaded area seMigloss black)
★8shiftercHroMe
3interiorsatin wHite
(paint sHaded area seMi-
gloss black)
18arm restsatin wHite
9rear seat front
satin wHite
10rear seat
baCKsatin wHite
4dash
satin wHite witH silver triM
(paint sHaded area seMi gloss black)
7steering wheel
wood
12steering Column
satin wHite
18arm restsatin wHite
6seat front
satin wHite
65seat baCKsatin wHite
6seat front
satin wHite
11seat baCKsatin wHite
silver
flat black
seMi gloss black
silver
silver
a a
b C
b C
Kit 2835 - page 3Kit 2835 - page 6
deCal10
FINAL ASSEMBLY6BodY ASSEMBLY1
1bodY
poppy red
★40rear view mirror
cHroMe
61rear window
clear
★52taillight
cHroMe
60windshield
clear
★53gas CapcHroMe
54side ventpoppy red
55side ventpoppy red
60windshield
clear
paint transparent red
silver
silver
49rear panpoppy red
56braCe
seMi gloss black
64washer fluid bag
seMi gloss black(paint cap gold)
21radiator wall
gloss black
★50rear bumper
cHroMe
★51baCKup light
cHroMe
22radiator
gloss black
★24master CYlinder
cHroMe(paint cap gold, body
seMi gloss black)
★51baCKup light
cHroMe
satin wHite
satin wHite
silver
9
2
7
1
silver
silver
b
a
b
a
note: Cut out deCal (9) and glue
in plaCe using white glue
6
4
3
Kit 2835 - page 2 Kit 2835 - page 7
deCal
deCal
deCal
deCal
deCal
deCal
deCal
FINAL ASSEMBLY coNtINuEd7
44front pan
poppy red
62headlight lens
clear
★49headlight bezel
cHroMe
★46front bumper
cHroMe
deCal
★45grill
cHroMe(paint grill flat
black witH silver details
★47turn signal
cHroMe(repeat for otHer side)
★49headlight bezel
cHroMe59
radiator hoseflat black
32air Cleaner
gold
turn signal aMber
seMi gloss black
★39side view mirror
cHroMe
2hood
poppy red
8
9
62headlight lens
clear
a b
C daluminum
flat black
gloss black
gold
poppy red
semigloss black
satin white
silver
steel
transparent red
turn signal amber
wood
aluminium
noir mat
noir brilliant
or
rouge povet
noir satiné
blanc satiné
argent
acier
rouge transparent
feu clignotant de direction ambre
bois
Kit 2835 85283520200
When the 1965 Mustang first appeared on the show-room floors, it was clear that Ford engineers had styled it to appeal to the widest cross-section of buyers pos-sible. Produced initially in hardtop and convertible ver-sions, the peak of Mustang design was reached in the 2+2 Fastback. The sporty, compact machine combined youthful exuberance and classic styling that made Mustang the best selling new car in automotive history.
The graceful contours of its front end were domi-nated by a grille-mounted, chrome running mustang that gave the car its name. The long hood, sculptured-side panels, sloping fastback, and kicked-up rear end provided the sporty flair and elegance for which the
Mustang is remembered today. Standard equipment on the Mustang consisted of a 120 horsepower six-cylin-der engine, bucket seats, floor mounted 3-speed trans-mission, sports steering wheel, full wheel covers and more. Select sports options included three V-8 engines developing up to 271 horsepower, front disc brakes, rally instrument package, and 4-speed. Your Revell kit of the Mustang 2+2 Fastback has been faithfully repro-duced using scale drawings and photographs that were originally provided from the Ford Motor Company.
‘65 Mustang 2+2 Fastback
this optional paint guide is provided if you choose to detail paint your model.
ce guide de peintures vous sera fourni si vous choisissez de peindre votre modèle en détail.
* Study the assembly drawings.* Each plastic part is identified by a number.* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome plated plastic.
* For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry.
* Check the fit of each piece before cementing in place.
* Use only cement for polystyrene plastic.* Scrape plating and paint from areas
to be cemented.* Allow paint to dry thoroughly before
handling parts.* Any unused parts may be discarded.
dEcAL APPLIcAtIoN INStRuctIoNS
1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and
slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any excess adhesive.
8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before
applying clear coat.
NotE: decals are compatible with setting solutions or solvents.
REAd tHIS BEFoRE You BEGIN LIRE cE QuI SuIt AVANt dE coMMENcER
* Etudier les schémas de montage.* Chaque pièce en plastique est identifiée par un numéro.* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant de la coller en place.
* N'utiliser que de la colle pour polystyrène.* Gratter les parties à coller pour enlever le chrome et la peinture.* Laisser la peinture bien sécher avant de manipuler les pièces.* Toute pièce inutilisée peut être jetée.
dIREctIVES d'APPLIcAtIoN dES AutocoLLANtS
1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQuE: Les autocollants sont compatibles avec les solutions de fixage ou les solvants.
5
6
3
note: Cut out deCal (9) and glue in plaCe using white glue
if you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:
revell inc Consumer service department, 1850 howard street unit a, elk grove village, illinois 60007be sure to include the plan number (85283520200), part number, description, your return address and phone number.
