Kitchen - Environmental Engineering Expertssekopump.com/Catalogs/SEKO Kitchen Dosing System.pdf ·...

KitchenDosing and Cleaning Systems

innovation > technology > future

2 cleaning & hygiene > products for kitchen

1. Glasswashers 6DETERGENT

4PR[Peristaltic dosing pumps]

4invikta D[Solenoid dosing pumps]

2. Hood type dishwashers6DETERGENT


4PA[Peristaltic dosing pumps]

4PRT[Peristaltic dosing pumps]

4Twindose 10[Dosing systems]





6RINSE AID


4PM[Peristaltic dosing pumps]

4PRT[Peristaltic dosing pumps]





4invikta R[Solenoid dosing pumps]

3. Conveyor dishwashers6DETERGENT





4Twindose 40Plus[Dosing systems]

4TwindosePowder[Dosing systems]


4tekna EVO[Solenoid dosing pumps]

6RINSE AID





4Twindose 40Plus[Dosing systems]

4TwindosePowder[Dosing systems]


4tekna EVO[Solenoid dosing pumps]

4. Manual wash6 DETERGENT

4prodose EPDM

4prosink 1

4prosink 2

6 SANITIZER

4prodose Silicone

4prosink 1

4prosink 2

6RINSE AID



1

2

6

innovation > technology > future 3

5. Drain Control4TM Analogic

[Analogue systems]

4TM Digital[Digital systems]

6. Surface Cleaning4promix

4proklyn

4prowash

4profoam

4

3

5

cleaning & hygiene > products for kitchen4

peristalticdosing pumps

Polypropylene enclosureextremely shockproof andresistant to chemical aggression

IP 65 protection degree andclass 2 electrical insulation(no ground connection required)

Extra-strong and long lifeSantoprene and sekobril

squeeze tubing, alwaysequipped with inlet-outletfittings for fast and safeconnections

Safe and Reliable

Easy wall mounting andremoving thanks to the fixingbrackets

Plugs on circuit board providefor a quick electrical connection

Easy tubing replacements.There’s no need to start thepump

Easy installationMinimum maintenance

Via trimmer settings simpleand fast parametersconfiguration

Plugs for protecting settings toavoid undesired tampering

User friendly

SEKO dosing pumps comply with the provisions contained in thefollowing international standards: 73/23CEE of 19/2/7389/336CEE of 3/5/89 • EN60335-1 • ISO 9001 (version 2000)


Power supply 230 Vac 50-60 Hz (24 Vac 50-60 Hz upon request)

Power consumption 3.5 W

PR 4 (Santoprene squeeze tubing) 0.1 bar 0.6…4 lt/hPR 7 (Santoprene squeeze tubing) 0.1 bar 1.2…7 lt/h

Models powered via single or double solenoid valves available.Two setting trimmers enable detergent Initial Charge and Make Up Charge.

Power supply 230 Vac 50-60 Hz (24 Vac 50-60 Hz upon request) • Power consumption 3.5 W

First Charge time 18 to 180 sec. • Top Up time 2 to 15 sec.

PRT 6 (Santoprene squeeze tubing) 0.1 bar 6 lt/hPRT 9 (Santoprene squeeze tubing) 0.1 bar 9 lt/h

PRT Fixed speed peristaltic pump with analogic adjustment of dosing time

PR Peristaltic pump with analogic speed adjustment

PA Fixed speed peristaltic pump with analogic dosing adjustment by conductivity probePower supply 230 Vac 50-60 Hz (24 Vac 50-60 Hz upon request)


Detergent

Rinse Aid

PA 6 (Santoprene squeeze tubing) 0.1 bar 6 lt/hPA 9 (Santoprene squeeze tubing) 0.1 bar 9 lt/h



PR 1 (sekobril squeeze tubing) 3 bar 0.2…1 lt/h

A trimmer enable rinse aid dosing time.


Power consumption 3.5 W • Dosing Time 1 to 25 sec.

PM 0.4 (sekobril squeeze tubing) 3 bar 0.4 lt/hPM 1.5 (sekobril squeeze tubing) 3 bar 1.5 lt/h

PM Fixed speed peristaltic pump with analogic adjustment of dosing time

PR Peristaltic pump with analogic speed adjustment


dosing systems

twindose10 and 20

TWINDOSE Series offers automatic compact detergent and rinse-aid dispensers. Properlydesigned for every type of dishwashing machine, it reduces all manual operations. Thanks toSeko’s long experience in peristaltic systems, installation and maintenance are very easy andrequire only a limited amount of time.

Just run the rinse-aid and detergent supplyline and connect the system to dishwashingmachines solenoid valves

Easy wall mounting and removing thanksto the in built fixing brackets

Easy maintenance, no special toolsrequired

Easy installationMinimum maintenance

Micro-switches and trimmers allowsimple and fast parameters configuration

Front cover opens to 90° allowing easierelectrical connections

Priming key for each product

User friendly

Safe and ReliableAll setting controls keptinside the box to avoidundesired tampering

IP 65 protection degree andclass 2 electrical insulation (noground connection required)

End of product alarm inputvia level probe in the form of areed contact

Santoprene and sekobril

squeeze tubing, alwaysequipped with inlet-outletfittings for fast and safeconnections


Technical FeaturesDETERGENT DOSING Speed control

RINSE-AID DOSING Speed control

DETERGENT DELAY TIME -

RINSE-AID DELAY TIME -

DETERGENT PUMP Santoprene squeeze tubingFlow rate 0.7 … 4 lt/h

RINSE-AID PUMP sekobril squeeze tubingMaximum pressure 3 barFlow rate 0.2 … 1 lt/h

ALARMS End of products buzzer signalling

POWER SUPPLYVia the solenoid valve 24/115/230 Vac

POWER CONSUMPTION 8 W

WEIGHT 1,2 Kg

DIMENSIONS (mm)W 195 x H 168 x D 110

PACKING DIMENSIONS (mm)W 270 x H 270 x D 130 (9,477 cm3)

Automatic compact detergent andrinse-aid dispenser.

Suitable for single solenoid valvedishwashing machines.

Twindose 10Analogue Systems

Technical Features

Automatic compact detergent andrinse-aid dispenser.

Suitable for single solenoid valvedishwashing machines.

Twindose 20Analogue Systems

DETERGENT DOSINGFirst Charge Timed control Top Up Speed control

RINSE-AID DOSING Speed control

DETERGENT DELAY TIME(Tunnel machines only) 20 sec.

RINSE-AID DELAY TIME -

DETERGENT PUMP Santoprene squeeze tubingFlow rate 1 … 6 lt/h

RINSE-AID PUMP sekobril squeeze tubingMaximum pressure 3 barFlow rate 0.2 … 1 lt/h

ALARMS End of products buzzer signalling

POWER SUPPLYVia the solenoid valve 24/115/230 Vac

POWER CONSUMPTION 8 W

WEIGHT 1,2 Kg

DIMENSIONS (mm) W 195 x H 168 x D 110


SEKO has come up with automatic dosing systems for industrial single tank and tunneldishwashing machines, especially intended for “heavy duty” applications (in which thedosing unit works for more than 50 hours per week): Twindose 35 and 35 LP Powder, Twindose 40 ,40 Plus and 40 LP Powder

LL Version (1 detergent pump and 1 rinse-aid pump)

DL Version (1 solenoid valve for the powder detergentdispenser and 1 rinse-aid pump)

LLL version (1 detergent pump, 1 rinse-aid pump, and 1sanitizer pump)

DLL Version (1 solenoid valve for the powder detergentdispenser, 1 rinse-aid pump, and 1 sanitizer pump)

A wide range

Conductivity or time for the detergent pump

Speed or time for the rinse-aid pump

Speed for the sanitizer pump

Three type of dosing

Simplicity, from the plumbing to connecting theelectricals: • To the solenoid valves for the dishwashing machine or

the washing pump• To an external power supply, with signals coming from

the dishwashing machine

Easy to install, thanks to the simple bracket for wallmounting

Maintenance is simple and no special tools are required

Simple to install and lowin maintenance


dosing systems

twindose 3540•Plus•LP

Internal microswitches andtrimmers (Version 35) for settingcontrolling parameters and selecting thedosing mode

External digital settings (Version 40& 40 Plus) with settings protected by apassword

Easy access to both the electricalconnections and the pumps, due to 90°panel opening

External keys for priming chemicalproducts

Protection degree IP65 and class 2electrical insulation (without groundconnection)

Level control with 3 inputs

Santoprene and sekobril squeezetubes, always equipped with inlet-outletfittings for fast and safe connections

Possibility of selectingconductivity measurement using aconductivity probe (Version 35 and 40)or inductive sensor (Version 40 Plus)

Audible alarmwhen set points are reached

Separate managementof the first load

Double conductivity display:• In μS and SKU using a conductivity

probe (Version 40)

• In mS and SKU using an inductiveprobe (Version 40 Plus)

Roller support bearing (standard forall versions) made with the TRANSAXLETECHNOLOGY to increase motor life

5-pole power-boosted motor(Version 40 and 40 Plus)

Electronic motor rpm control

Delime mode: This is used to decalcifydishwashing machine withoutdisconnecting the Twindose

Relay alarm output

Fault Diagnosis Function

Statistics management(Version 40 and 40 Plus)

Safety and reliability

Technical FeaturesDETERGENT DOSING Conductivity or Timed

RINSE-AID DOSING Speed or Timed

SANITIZER DOSING Speed

DETERGENT PUMP Santoprene Squeeze tubingFlow rate 0.9 … 10.8 lt/h

RINSE-AID PUMP sekobril Squeeze tubingMaximum pressure 3 barFlow rate 0.12 … 1.5 lt/h

SANITIZER PUMP sekobril Squeeze tubingMaximum pressure 3 barFlow rate 0.12 … 1.5 lt/h

CONDUCTIVITY MEASURING SCALE(using a conductivity probe) from 200 μS to 10 mS

ALARMS OFA double time 255 sec. (The first activates the alarm and the second stops the pumps)

POWER SUPPLY Switchingfrom 100 to 240 Vac (24 Vac with additional module)

INPUT SIGNALS selectable (using jumpers)from 20 to 265 Vac or 150 to 265 Vac

POWER CONSUMPTION (max.) 14 W

WEIGHT 3,5 kg

DIMENSIONS (mm)Version LL • LLL W 285 x H 220 x D 110Version DL • DLL W 360 x H 220 x D 110


This is a versatile, safe, dosing system that is controlled by a microprocessor.It is based on SEKO’s experience with dishwashing machine systems, andcombines modern technology, easy installation, and user-friendlyprogramming. Available in various versions for dosing liquids and powdersit can be used with all types of dishwashing machines (single tank andtunnel).

Twindose 35/35 PowderAnalogue Systems

Technical Features

This dosing system is controlled by a microprocessor and has an LCDdisplay. It is the jewel in the crown of SEKO dosing systems, and combineseasy installation with a wide range of functions including management ofstatistics, which can be downloaded using an infrared system. Twindose40 and 40 Plus are designed for use with all types of dishwashingmachines (single tank and tunnel). Twindose 40 Plus is specifically designedfor heavier duty applications, with the use of power-boosted motors andinductive technology for measuring conductivity. The range availableincludes a series of models that are able to suit all the client’s needs.

Twindose 40/40 PLUS40 Powder Digital Systems

DETERGENT DOSING Conductivity or Timed

RINSE-AID DOSING Speed or Timed

SANITIZER DOSING Speed

DETERGENT PUMP Santoprene Squeeze tubingFlow rate 1.0 … 13.2 lt/h

RINSE-AID PUMP sekobril Squeeze tubingMaximum pressure 3 barFlow rate 0.19 … 2.4 lt/h

SANITIZER PUMP sekobril Squeeze tubingMaximum pressure 3 barFlow rate 0.19 … 2.4 lt/h

CONDUCTIVITY MEASURING SCALE(using a conductivity probe - Twindose 40) from 200 μS to 10 mS(using an inductive probe - Twindose 40 Plus) from 1 to 50 mS

ALARMS OFA double time 999 sec.(The first activates the alarm and the second stops the pumps)

POWER SUPPLY Switching from 100 to 240 Vac (24 Vac with additional module)

INPUT SIGNALS selectable (using jumpers)from 20 to 240 Vac or 150 to 240 Vac

POWER CONSUMPTION (max.) 20 W

WEIGHT 3,5 kg

DIMENSIONS (mm)Version LL • LLL W 285 x H 220 x D 110Version DL • DLL W 360 x H 220 x D 110



for powder

for powder

Level controlsystem*

Flexible conduitholder**

Double wallmounting bracket

Plastic Tconnector

Suctiondevice without

level probe

Suctiondevice withlevel probe

Stainless Steelinjection

connector

Low profileinjection

connector

* With every type of dosing pump. Two end of product alarm input via level probe in the form of a reed contact signalled with the flashing of the LED. SupplementaryOutput alarm relay available. Power supply: 230 Vac (24 Vac upon request) ** Ø internal 10mm, Ø external 16mm upon request

all models all models all models PR/PM all models PR PA PR/PRT

PA PR /PRT


Conductivityprobe

Wallmountingbracket

PP injectionconnector

Stainless Steelnon return valve

Boiler non returnvalve adapter

Ø 6-8 mm Foot filterPVC

Suction tubingPE

Delivery Tubing

PA all models PA PR/PRT PR/PM PR/PM all models all models PR/PM

Conductivity probe

35/4040Plus (inductive)

Wall mountingbracket

all models

Stainless Steelinjection connector

all models(for LL and LLL 35, 40 and

40 Plus versions)

PVC Suction tubing

all models

PE Delivery Tubing

all models

PVC delivery tube forPowder dispenser

35/40/40Plus(only for DL and DLL versions)

Foot filter

all models

Powder detergentinjection connector

35/40/40Plus(only for DL and DLL versions)

PP sanitizerinjection

connector

35/40/40Plus(only for LL and LLL versions)

Stainless Steelnon return valve

all models

Boiler non return valveadapter Ø 6-8 mm

all models

Plastic T connector

35/40/40Plus

Installation Kit

Accessories

Plastic Tconnector

all models

Suction devicwithout level probe

all models

Suction devicewith level probe

all models

Powderdetergent container

35/40/40Plus(only for DL and DLL

versions)

Powderdetergent dissolever

35/40/40Plus(only for DL and DLL

versions)

PP injectionconnector

all models

Low profileinjection

connector

all models


solenoid dosing pumps

inviktaSpecially designed for the detergent market with specific performance (flow rate and pressure).

Its weight and small size make it a product that is especially easy to handle and install under anyconditions.

Manual regulationof the flow ratefrom 0 (pumpstopped) to 100%of maximum flowrate

Standardpower supply100÷240 Vac(20÷90 Vacupon request)

The pump hasan input forthe level probe

Operating status LED:

• Flashes when the pumpis operating

• Flashes slowly when thepump is stopped

• Flashes quickly when alevel alarm is activated

The outer PP plasticcontainer has an IP65protection level andprotects the unit fromwater spray and canwithstand aggressiveenvironments

Pump casingwith manual

priming valve

Wall mounting:

• directly onthe wall

• fixingbracket kit

invikta DDetergent Dosing

Technical Features

Maximum flow rate 5 lt/h

Maximum pressure 2 bar

Valves and seals EPDM

invikta RRinse Aid Dosing

Technical Features

Maximum flow rate 2 lt/h

Maximum pressure 7 bar

Valves and seals FPM

Protection degree IP65

Flow rate adjustmentManual from 0 to 100%

Power supplyfrom 100 to 240 VAC (Standard)


tekna EVOAKLAnalogue dosing pump with constantflow rate manually adjustable

constant dosage

tekna EVOAPGAnalogue dosing pump with constantflow rate manually adjustable, withproportional flow rate according to anexternal analog (4÷20 mA) or digitalsignal (water meter)

proportional dosage

teknaEVO TPGDigital dosing pump with constantflow rate manually adjustable, withproportional flow rate according to anexternal analog (4÷20 mA) or digitalsignal (water meter)

proportional dosage

ModelCode Pressure

[bar]Flow rate

[lt/h]Fequency max[stroke./min]

Stroke capacity[cc/stroke]

Ø ConnectionsIN / OUT [mm]

Consumption[W]

20 18

2.53

1200,350,41

4 / 6 suc.4 / 7 dis.

12,0600

121082

4568

160

0,420,520,630,83

4 / 6 12,2603

121051

7101518

320

0,360,520,780,94

4 / 6 23,9800

5421

20254054

300

1,111,392,22

3

8 / 12 22,2803

l Flow rate from 1 to 60 lt/hwith an output pressure up to20 Bar

l Casing made of PP reinforcedwith glass fibre

l IP 65 rated

l PTFE diaphragm

l Level control input

l Priming valve

l Complete standardinstallation kit composed by:foot filter and injection valve,PVC suction tube, PE deliverytube and fixing bracket

CleverJust 4 Models, justPVDF, all functions inone pump

CompatiblePVDF pump head andceramic ball valve asstandard

ReliableLong life diaphragmtested to give 5 yearsworking life

Steady DosingPerformanceStabilized Multi PowerSupply 100÷240 Vac50/60 Hz with reducedconsumption

IntuitiveprogrammingA new concept ofprogramming menu

solenoid dosing pumps

teknaEVO

Spout Kit (included)For a perfect and accurate dosage of chemicals


hand pump

prodoseFor controlling usage of Pot andPan, Sanitizing and mostother concentrated institutionalcleaning products

Wall mounting bracket

Fast, EasyInstallationNo drill required, when replacingexisting pumps, the hole patternson the smart bracket match mostexisting models. Easy mountingand removing with the smartmounting bracket.

Accurate DosingEach push yields the samevolume output every time

AdjustableFlow RateInternally adjustable to deliver7.5, 15, 22 or 30 cc per push

Complete RangeModels available for detergents,solvents and chlorine products

Reliable• Spring not in contact with

liquid

• Inlet and outlet valve easilyaccessible for cleaning orreplacing

ApplicationsKitchen, Janitorial andCommercial


15 colourcoded dilution tips

l Strong, long lasting and easy to clean ruggedstainless steel enclosure

l Smooth and ergonomic surface, with no sharpedges and customisable front cover

l Connection direct to the water source, noelectric power or compressed

air needed

l Space saving

Quick and easy installationno special tools required

For all proportioning applications, SEKOprovides the following:

l Ability to dose 2 different products insuccession or simultaneously(2 products version)

l Single or Double chemical use

l 16 lt/min Flow rate

l 15 different mixing ratios can be easilychosen, making the dosing accurate andeffective

l Ball valve operation, no need to hold or locka button

l Ultra lean Tip

ProSink available accessories:l Wire rack for chemical containers

dilution system

prosinkThe ProSink is a chemical dispensing system that automatically and consistently mixes theprecise amount of detergent and sanitizer with water by turning a knob, conveniently filling largesinks with accurate product solutions.

l Ball valve operation

l No need to hold or lock a button

l Connection direct to the watersource

l No electric power or compressedair needed

l Backflow preventionsystem

l Protecting againstcross-contamination ofthe water supply

l Smooth andergonomic surface,with no sharp edgesand customizablefront cover

l Attractiveuser-friendly design

l Rugged stainless steel enclosure

l Strong, long lasting and easy toclean

l Installs easily with 2 or 3 screws


n IP65 protection degree and Low noise

n Easy to install, to use and to maintenance

n Peristaltic pump build-in

n Digital or analogical clock programmer

drain control

TMSystems The TM dosing systems, by a programmable clock controls the pump, for a dosage veryeasy and accurate.

TM AnalogicAnalogical programmer Is a metering system with timed operation and a peristalticpump. The programmable analogical clock controls the pumpand by the internal circuit is possible to set the dose time ofperistaltic pump.

Power supply 230 Vac (115 Vac upon request)

Consumption 5 W

Dimesions 155 x 213 x 110 mm

Flow Rate 0,4 lt/h

Pressure 1,5 bar

TM DigitalDigital programmer Possibility to set 8 dosing periods for each day of the week. The pro-grammer has a functionality to start the pump (manual mode) or todisconnect the pump from the clock signals.

Power supply 230 Vac (115 Vac upon request)

Consumption 5 W

Dimesions 155 x 213 x 110 mm

Flow Rate 0,4 lt/h

Pressure 1,5 bar

ProMix guarantees innovation andaccurate design of all mechanicalparts.

l Maximum versatility and minimuminventory thanks to the modularcomponents

l Space savingl Quick and easy installation

For all cleaning applications, SEKO hasprovided the following:

l Single or multiple chemical usel Flow rate at 4, 16 or 30 lt/minl Easy touch button and one hand lever

operationl A backflow preventing device to avoid

chemical contamination to the watersource

l Outlet Tube or Bucket Mount forremote actuation(16 and 30 lt/min systems only)

l Fill tube designed to minimizeexcess foam (4 lt/min systems only)

ProMix available accessories:l Wire rack for chemical containersl Drip Tray to avoid spillagel Ultra lean Tip


dilution system

promix

Model Activated No. Products Gap type Flow ratePromix B1F04 Button 1 F-Gap 4 lt/minPromix B1F16 Button 1 F-Gap 16 lt/minPromix B1F30 Button 1 F-Gap 30 lt/minPromix L1F04 Lever 1 F-Gap 4 lt/min

Promix B4F04 Button 4 F-Gap 4 lt/minPromix B4F16 Button 4 F-Gap 16 lt/minPromix L4F04 Lever 4 F-Gap 4 lt/min

Product range

... Mount the bracket andput away your tools

... snap the PROMIX ontothe bracket

... insert metering tips andtubing

1

2

3

Time is your mostvaluable asset.With ProMix, a twentyminute install now takesas little as five minutes.No more…• Removing the screws• Removing the cover• Misplacing the screws• Searching for the screws• Realigning and replacing

the cover• Re-securing the screws you

were able to find

easy as…

SEKO’s ProMix is an innotive system enabling fast and simple proportioning of multiple chemical applications. It’seconomical, reliable and user-friendly, allowing diluted chemicals to be dispensed into small and large containers.

15 colourcoded dilution tips

ENCLOSURE innovative solutionl ProMix system allows additional units to be easily added to an existing installation

l Easy installation thank to the wall fixing bracket that avoid to open the ProMix front cover duringthe installation

l The precise dilution of chemical and water can be achieved by changing the Metering Tips.


spraying & foaming system

proklyn/prowash/profoamThese units are designed for cleaning and/or disinfecting floors and surfaces in thefood industry:

l food preparation areas (as full service kitchens, meat processing plants, vegetableprocessing meat rooms, delicatessen, seafood stores, bakeries)

l packing areas, trucks washing, loading docks, auto dealers, fitness facilities (lockerrooms in schools, health clubs), etc.

Features l Easily removable non return valve and polypropylene Venturi system

l Connection direct to the water line

l Low sensitivity to water pressure variations

l Installation via 3 mounting screws

l Antipollution valve

l Nickel plated brass ball valve

l Smooth and ergonomic surface, with profiled front cover

l Strong structure, protected against “water hammer” effect

l High chemical resistance

l Gun with adjustable spray nozzle, completely covered with foodgrade rubber brass body (only for proklyn and prowash systems)

l 15 coloured coded dilution tips

l Food grade quality discharge tube

l 60 cm or telescopic (1 up to 2 m) gun

Advantagesl Easy installation, use and maintenance

l Versatility, safe handling, heavy duty capability. Fastest connectiongun with anti shock protection

l Constant flow rate despite of pressure variations

l Easily adaptable to change from a 1 product unit into 2 productssystem

l Allows to easily choose 15 different mixing ratios, making the dosingaccurate and efficient

l No electric power

l Works even with low water pressure

l Prevents the wastage of water and cleaning products, therebycontributing towards environmental protection and cost control

l The 2 product units: a single appliance optimises working time andallows different products such as disinfectants and detergents to beused in succession

l No oxidation issues


prowash

Available models:

prowash “1 product”for clean/rinse operations

prowash “2 products”for clean/rinse/sanitize operations

proklyn

Available models:

proklyn “1 product”for clean/rinse operations

proklyn “2 products”for clean/rinse/sanitize operations

Technical FeaturesWORKING TEMPERATURE60° C max.

WORKING PRESSION0,5 up to 5 bar

METERING TIPS FOR DILUTION RATIOSfrom 211:1 up to 11:1(from 0,50% up to 10,90%)

DIMENSIONS WITHOUT TUBESLENGHT 380 mmWIDTH 270 mmDEPTH 70 mm

WEIGHTSPRAYING STATION ONLY 1,5 kg

Technical FeaturesWORKING TEMPERATURE60° C max.

WORKING PRESSION0,5 up to 5 bar

METERING TIPS FOR DILUTION RATIOSfrom 211:1 up to 11:1(from 0,50% up to 10,90%)

DIMENSIONS WITHOUT TUBESLENGHT 380 mmWIDTH 260 mmDEPTH 90 mm

WEIGHTSPRAYING STATION ONLY 3,3 kg

profoamAdvantages

n High-quality, dry foam

n Optimal working time for thefoam on the surfaces

n Lower water consumption

Foam units generate foam to cleanand/or disinfect surfaces

Featuresn Fits directly onto the low-pressure

water and compressed-air circuits

n The PVC version comes with a built-inhose prop, the stainless steel versioncomes with a separate hose prop

n This system can also be trolley-mounted, with an air compressoravailable as an option

n A water and air pressure manometeris included


ST

AIN

LE

SS

ST

EE

L R

EE

LS

GU

N(s

tan

da

rd f

or

pro

kly

n a

nd

pro

wa

sh

) Featuresl Brass body, completely covered with food grade rubber

l High flow nickel plated nozzle, stainless steel spring and pin

l Reinforced lever trigger

l Adjustable spray

l Quick coupling system

l Up to 80°C working temperature and 25 bar working pressure

Advantagesl Heavy duty

l Fastest connection

l Easy to connect

l Rugged, versatile, safe handling, anti shock protection, heavy duty

DIS

CO

NN

EC

TO

R(u

po

n r

equ

est)

The stainless steel reel allows users to stow the hoses away effortlesslyand quickly.

Featuresl Entirely built in stainless steel (AISI 304)l Can be mounted onto horizontal or vertical surfacesl Automatic winding

Advantagesl Rugged and long lastingl Versatile and space saving

Dimension: H=50 cm L=26 cm D=60 cmHose length: 20 m • Weight: 30 Kg

l Prevents any possible water pollution through chemical backflow

l Easily accessible BA triple check valve, 3 connecting and testingpoints

l Approved by DVGW (Deutsche Vereinigung des Gas- undWasserfaches e.V. - German Normative Bureau)

l Conforms to EN 1717 norm

The technical data may be altered without prior warning. The drawings and images are for illustrative purposes only.© seko spa / Printed in Italy / BRO KITUK 081

www.seko.com

SEKO Asia Pacific SINGAPORE • SEKO China CHINA • SEKO do Brasil BRAZIL • SEKO DosingSystems USA • SEKO Deutschland GERMANY • SEKO France FRANCE • SEKO Iberica SPAINSEKO Italia ITALY • OOO SEKO RUSSIA • SEKO Northern Europe DENMARK • SEKO SIETAROMANIA • SEKO Southern Africa SOUTH AFRICA • SEKO UK UNITED KINGDOM

Date post:	27-Mar-2021
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times

Kitchen - Environmental Engineering Expertssekopump.com/Catalogs/SEKO Kitchen Dosing System.pdf ·...

Documents