KM C654e-20200925164355

INCLUDED GOODS/SERVICES EXHIBIT A

MASTER CONTRACT NO. 00120 - CATCH BASIN CLEANERS AND JET RODDER TRUCKS (VARIOUS SIZES) EXHIBIT A 1 (Rev. 2020-03-11)

BIDDER: Enviro-Clean Equipment, Inc.

Solicitation NO.: 00120- Catch Basin Cleaners and Jet Rodder Trucks (Various Sizes)Exhibit B - Performance Requirements (Revised 7.27.20)Instructions:1. Review Requirements.

2. Review Priority and the provided definitions:

• “MANDATORY”: Bidder response must comply with the requirement and the Bidder’s response will be evaluated on a "Pass/Fail" basis. Selecting "Fully Meets" for mandatory requirements will be considered "Pass". All other responses will be considered "Fail".

• "MANDATORY SCORED": Bidder response will be evaluated and assigned a score based on how well Bidder’s response meets the requirement. Maximum points possible is 20 points for each requirement. Not meeting any of the requirements will be evaluated as a “Fail”.

• “HIGHLY DESIRABLE": Bidder response will be evaluated and assigned a score based on how well Bidder’s response meets the requirement. Maximum points possible is 10 points for each requirement.

Highly Desirable Requirements support necessary purchaser operations and the Bidder response is less effective if such requirements are not met.

• “DESIRABLE”: Bidder response will be evaluated and assigned a score based on how well Bidder’s response meets the requirement. Maximum points possible is 5 points for each requirement.

Desirable Requirements enhance operational functionality or quality and make it more desirable.

3. Select and indicate using the pulldown button if bidder Fully Meets, Partially Meets, or Does Not Meet a requirement in How Bidder Meets Requirement column.

• Any response that bidder "Partially Meets" must have a written response detailing how and to what extent the bidder "Partially Meets" the requirement. This excludes "Mandatory" Requirements.

4. Bidder must respond in the Written Response column for every requirement that indicates a "Written Response Required”.

Limited responses may receive lower scoring than those that demonstrate understanding and mastery of the subject matter.

Req ID Category Functional Requirements PriorityHow Bidder Meets

RequirementWritten Response

1.0 General 1. General Bidder Requirements

1.1 General Must be able to install Catch Basin Cleaner equipment and/or Jet Rodder equipment on to dealer furnished chassis, OR Purchaser provided chassis. MANDATORY Fully Meets

1.2 GeneralThe Bidder must be capable of providing repair parts and supply support for a minimum period of ten (10) years after the delivery date of theequipment.

MANDATORYFully Meets

1.3 General Bidder must provide all equipment, parts and training under this contract in accordance with industry standards and/or required by law. MANDATORY Fully Meets

1.4 General Bidder must be able to provide Catch Basin Cleaners, in various sizes, including, but not limited to, 1.5 cu yd. up to 15 cu yd. MANDATORY

SCOREDFully Meets

Enviro-Clean/ Vac-Con can provide various sizes including 1.5 cu yd, 3.5 cu yd, 5 cu yd, 9 cu yd, 11 cu yd, 12 cu yd, 15 cu yd and 16 cu yd units. Special order units are available inbetween the standard sizes. Vac-Con can custom design and

build (almost) any size debris body.

1.5 GeneralBidder must be able to supply and install Catch Basin Cleaner and/or Jet Rodder equipment on various sizes of chassis, including but not limited to 2 axle, 3 axle, 4 axle or 5 axle.

MANDATORY SCORED

Fully Meets

Enviro-Clean/Vac-Con is able to supply and install CB Cleaners and Jet Rodder equipment on various sizes of chassis including 2 axle non CDL, 2 axle CDL, 3 axle, 4 axle and 5 axle chassis. Vac-Con is capable of installing on custom chassis

and will work with every manufacturer. Chassis included as options in the bid include IH, Freightliner, Peterbilt and Western Star. Mack, Volvo and Kenworth have been used regularly as well. We are activly looking for a all electric chassis

option and expect to have one before the end of the contract term.

1.6 General Bidder must be able to provide Jet Rodder equipment, with various size fresh water tanks including but not limited to 1000 up to 3000 gal. MANDATORY

SCOREDFully Meets

Enviro-Clean/Vac-Con is able to provide Jet Rodder equipment with various size fresh water tanks including 1,000 - 1,600 - 2,000 - 2,500 - 3,000 gallon fresh water tanks. Smaller tanks are avaibable upon request as special builds.

1.7 GeneralBidder must submit entire Manufacturers Suggested Retail Price (MSRP) catalog for review. Purchasers would be able to purchase any equipment, options or additions in catalog related to Catch Basin Cleaners and/or Jet Rodder Trucks. Chassis is not included in this requirement.

MANDATORY SCORED

Fully Meets

MSRP catalogs submitted include: 1) Catch Basin Cleaners - 2) Single Engine Combo Sewer Cleaners - 3) Dual Engine Combo Sewer Cleaners - 4) Jet Rodder Cleaners (Hot Shots - Both Single Engine and Twin Engine) - 5) Hydro Excavators

(PD and Fan - Front Boom and Rear Boom) - 6) 3 Yard units - 7) Hook Lift Units - 8) Titan Specilized Combo Units

1.7.1 General Bidder must provide Purchaser with the current MSRP for Chassis with applicable options AND Bidder’s discounted price prior to time of order. MANDATORY

SCOREDFully Meets

Enviro-Clean will provide current MSRP for Chassis with options and bidders price on a quote prior to time of order per instructions.

1.8 GeneralBidder must have an assigned representative and/or order desk that can service the purchaser's needs for assistance, recommendations or parts and repairs in case of an emergency. Order desk to be available at least from 7:00am to 5:00pm (Pacific Time), Monday through Friday except State holidays.

MANDATORY SCORED

Fully MeetsEnviro-Clean's order desk and assigned representitive will be available for assistance with parts and service help from

7:00am - 5:00pm weekdays and in case of emergencies 24/7. Brett Andrist (306) 305-7445 / Jake Jenkins (206) 418-8786

1.9 General Bidder must provide upon request individual demonstration of requested configuration (or representative model) to individual Purchasers. HIGHLY DESIRABLE Fully MeetsEnviro-Clean maintains a selection of Vac-Con demonstration equipment. Vac-Con is also able to supply factory

demonstration equipment as needed. 2.0 Equipment 2. General Equipment Requirements2.1 Equipment All units must be new, unused, up-to-date models and must be delivered ready for service. MANDATORY Fully Meets

2.2 Equipment Each unit must include all inspection coupons and warranty identification cards furnished to general trade MANDATORY Fully Meets

2.3 Equipment All extended warranty months and miles/hours must be clearly noted on a placard installed in the vehicle.(Manufacturers Statement of Origin) (title) MANDATORY Fully Meets

2.4 Equipment Equipment offered for this contract must be new (unused) and a current production model. MANDATORY Fully Meets

2.5 EquipmentAll accessories and features listed herein must be those supplied by the Original Equipment Manufacturer (OEM), unless substitutions are requested and/or authorized by Purchaser.

MANDATORY Fully Meets

2.6 EquipmentAny accessories, features, or operational performance required by FMVSS, Washington State Motor Vehicle Laws, OSHA or WISHA laws or mandates, that apply to the equipment being bid, must be provided by the manufacturer.


2.7 Equipment All units associated with this purchase must be of the same design and quality as those sold through normal retail channels; and they must possess the latest technology, accessories, and features offered on standard retail units; whether or not they are called for in the following specifications.


2.8 Equipment Completed vehicle must be DOT compliant for on-road use. MANDATORY Fully Meets

2.9 Equipment Completed vehicles must meet Washington GVWR standards (RCW 46.44.041) with fresh water tanks at FULL capacity. MANDATORY Fully Meets

2.10 Equipment All components and accessories cataloged as standard, unless otherwise specified by the Purchaser, must be provided with the unit MANDATORY Fully Meets

2.11 EquipmentChassis sold under this contract must meet or exceed current Federal EPA emissions standards for the appropriate Light-Duty or Heavy-Duty Vehicle.

MANDATORY SCORED

Fully MeetsOur local chassis dealers as well as the Vac-Con chassis suppliers only supply chassis built to current Federal EPA emissions

standards for all on - road applications

2.12 EquipmentBidder must Identify equipment/parts that are included in a standard Catch Basin Cleaner truck, Combination Catch Basin Cleaner and Jet Rodder truck. Please identify standard builds for each size of Catch Basin Truck and/or Jet Rodder truck you offer for sale.

MANDATORY SCORED

Fully MeetsStandard Builds/Equipment are listed at the top of every MSRP Catalog.

2.13 EquipmentThirty (30) days before manufacture date of vehicle, Bidder must notify purchaser of latest technology options added to catalog since time of purchase order placement, At that time, bidder must give purchaser option to add additional new technology features to order.

MANDATORY SCORED

Fully MeetsEnviro-Clean will inform purchaser of any new fetures available from Vac-Con 30 days before build date per

instructions/requirements.

2.14 EquipmentHydraulic system should be compatible with biodegradable (EAL) Environmentally Acceptable Lubricants as defined in Appendix A of EPA VGP Permit https://www3.epa.gov/npdes/pubs/vgp_permit2013.pdf, upon Purchaser request

HIGHLY DESIRABLE Fully MeetsVac-Con hydraulic systems are compatible with biodegradable (EAL) Lubricants as required.

3.0 Parts 3. Parts3.1 Parts Bidder must provide Original Equipment Manufacturer (OEM) parts for Catch Basin Cleaners and/or Jet Rodder Equipment. MANDATORY Fully Meets3.2 Parts Purchasers must be able to purchase parts separate from entire vehicle, Catch Basin Cleaner, or Jet Rodder truck. MANDATORY Fully Meets3.3 Parts The total price for parts must be the same regardless of whether Purchasers make payment by cash, credit card, or electronic payment. MANDATORY Fully Meets

3.4 PartsParts must be delivered to location specified in Purchase Order. Delivery fees are allowed as a separate line item on parts that are ordered separately as opposed to a completely configured vehicle.


4.0 Options 4. Options

4.1 Options Bidder must provide option to purchase Backup camera and/or 360 camera provisions. MANDATORY

SCORED Fully MeetsCamera System MSRP $1,279.00 Cameras MSRP $592.00 Must order any camera separate from the system. Up to 4

cameras can be added without any special pricing needed. MSRP for the 360 camera option is $4,600.00.

4.2 OptionsBidder must provide option to purchase skid platforms including hooklift configurations, in various sizes, including but not limited to 13' skid platforms.

HIGHLY DESIRABLE Fully MeetsPlease see attached Hook Lift quotes including a 13' option. Skid and trailer configurations are available in several sizes

per request. Hook lift skids are available per customer request. Two Quotes are attached as catalogues.

4.3 OptionsBidder must offer Fan as option to purchase for Vacuum Systems installed on all Catch Basin Cleaner Trucks, instead of PD unit. Fan option must meet the performance criteria of 0 - 8000 CFM and 0 - 200 inches of negative water pressure. Noise level at the operators workstation, must be 85 dB (A) or less and must be equipped with a cyclonic style separator.

HIGHLY DESIRABLE Fully Meets

Enviro-Clean / Vac-Con offer fan configurations in single engine and dual engine configurations. These options are contained in the MSRP Catalogs. The Single Engine Fan and Dual Engine Fan with gas Aux Engine will meet the

requirements. The Diesel engine aux engine will not meet the noise requirement at this time. We are testing a new diesel aux engine that should be available in early 2021. We will update as information is available.

5.0Alternative Technology

5. Alternative Technology Requirements

5.1 Alternative TechnologyBidders work with Purchasers to create and develop alternative technology options for Catch Basin Cleaner and Jet Rodder equipment to reducegreenhouse gasses, including battery operated vehicles, hybrid technology, and or alternative fuels (biodiesel, CNG Hydrogen etc.). May include,fully electric chassis, diesel/electric hybrids, or other technologies to reduce greenhouse gasses.

HIGHLY DESIRABLE

Fully Meets

Enviro-Clean / Vac-Con are both committed to working with customers and third party suppliers to address the need to produce environmentally friendly equipment using battery power, hybrid and alternative fuel technology to help reduce green house gases. We were the first in recent years to offer a gasoline fueled aux engine and continue to provide CNG powered units. We offer a fan unit that can operate with the chassis engine at 1,250 rpm and provide full performance.

Vac-COn is working closely with chassis manufacturers and when a usable battery or hybred powered unit is available they will design a unit around it. Doing what we can. Enviro-Clean would welcome the opportunity to work closer with the

State on any green efforts.

5.2 Alternative TechnologyComponents including motors, inverters, controllers, transmissions and energy storage must be suitable for use on class 8 on-road trucks, weighing up to 80,000 lbs. GVWR.

HIGHLY DESIRABLEPartially Meets

For no road use, Vac-Con has only used components suitable for on road use. Enviro-Clean / Vac-Con will not supply and componant that isn't suitable for this application.

5.3 Alternative Technology Traction batteries must be latest lithium-ion battery technology approved for vehicle applications. HIGHLY DESIRABLEPartially Meets

Enviro- Clean / Vac-Con will adhere to this requirement when suitable options are made available on a platform that we are able to use.

5.4 Alternative TechnologyBattery size options must fit utilization requirements. Provide size options in bid response. Battery capacity will need to be identified upon award of contract.

HIGHLY DESIRABLEPartially Meets

We are not aware of anything available at this time. We anticipate they will be available within the term of this contract and when they are available we will communicate sizes and capacities. This is all we can do at this time.

5.5 Alternative Technology Inverter charger should be integrated into the vehicle. DESIRABLEPartially Meets

We are not aware of anything available at this time. We anticipate they will be available within the term of this contract and when they are available we will communicate if on-board vs plugin are available.

5.6 Alternative Technology System must be designed to allow for “opportunity charging”. DESIRABLEPartially Meets

We are not aware of anything available at this time. We anticipate they will be available within the term of this contract and when they are available we will communicate information.

5.7 Alternative Technology Battery state of charge indicator must be visible to operator from driver’s seat. HIGHLY DESIRABLEPartially Meets


5.8 Alternative Technology Peak shaving, smart grid and vehicle-to-grid technologies preferred. DESIRABLEPartially Meets


5.9 Alternative Technology Electric Vehicle Supply Equipment (EVSE) must be included with bid response and hardware provided by bidder. Installation quote not necessary. HIGHLY DESIRABLEPartially Meets


INCLUDED GOODS/SERVICES EXHIBIT A

MASTER CONTRACT NO. 00120 - CATCH BASIN CLEANERS AND JET RODDER TRUCKS (VARIOUS SIZES) EXHIBIT A 2 (Rev. 2020-03-11)

6.0 Sp. Notes/ Wk 6. Special Notes/Workmanship

6.1 Sp. Notes/ WkHose, wire and tube routing must not impede normal maintenance and adjustment of the unit. Hoses, wires and tubes must be securely and neatly positioned and secured with non-corrosive clamps.


6.2 Sp. Notes/ WkAny relocated OEM chassis serviceable components such as batteries, air tanks, etc., must be easily accessible for routine and/or daily use and maintenance.


6.3 Sp. Notes/ WkFilters must be easily accessible and replaceable without removing or disconnecting other components. If necessary filters may be remotely mounted to meet this requirement. All filters must be heavy-duty and sized for severe duty service.


6.4 Sp. Notes/ WkIf special tools, gauges, adapters, etc., are required for normal maintenance, adjustment and/or inspection of the unit, they must be identified and provided with the unit.


6.5 Sp. Notes/ Wk Engineering schematic drawings of the electrical and hydraulic systems are required. Digital copies preferred. Due upon delivery of each unit. MANDATORY Fully Meets

6.6 Sp. Notes/ WkCOVERS: All caps and covers that must be removed in order to perform daily to bi-weekly Preventive Maintenance, other scheduled warranty service, or maintenance recommended or required by the Contractor, must be secured to the Unit by a chain or other device. All hoses, pipes, and plumbing connections must have either retained covers, quick disconnects, or protective caps.


6.7 Sp. Notes/ WkHOSE, WIRE AND TUBE ROUTING: Hose, wire and tube routing must not impede normal maintenance and adjustment of the Unit. Hoses, wires and tubes must be securely and neatly positioned. Kinks in hoses, wires, and/or tubing are not acceptable.


6.8 Sp. Notes/ WkHYDRAULIC SYSTEMS (Workmanship Standards applicable to both traction and controls systems):

MANDATORY Fully Meets6.9 Sp. Notes/ Wk Hydraulic Symbols: Hydraulic symbols on schematics must be interpreted per American National Standard Institute (ANSI) Y32.10. MANDATORY Fully Meets6.10 Sp. Notes/ Wk Leaks: Hydraulic leaks are not acceptable. A leak is defined as any fluid flow larger than one (1) drop in four (4) hours. MANDATORY Fully Meets

6.11 Sp. Notes/ WkAll components installed in the hydraulic system must be free of contamination and must be flushed out or cleaned, if necessary, to meet this requirement. Components containing hydraulic fluid must not be installed in the cab.


6.12 Sp. Notes/ Wk

Hose Routing: Hose routing must meet the following requirements:The bend radii of hoses must be not less than the manufacturers' recommended minimums.Hoses must be routed no closer than six (6) inches from exhaust components or other heat sources unless proper shielding is provided.Hoses must not come in contact with moving parts.Hoses must be clamped to supporting structures at intervals not exceeding sixty (60) hose diameters. Clamps must be Beranger style or equal cushion clamps.Hydraulic hoses will NOT be bundled together using “wire ties”. This must be accomplished using the Beranger or equal clamps. Fittings must be steel thirty-seven (37)-degree flare type on all pressure lines where practical. Flat-faced "O" ring seal type fittings are acceptable.Hoses must not be routed through holes or across sharp edges without protection from being chafed or cut.

MANDATORY

Fully Meets

6.13 Sp. Notes/ WkAll major components, such as pumps, cylinders, motors and relief valves must be identified with their function and size. Relief valves must indicate proper pressure setting for each valve on the schematic.


7.0 Elec. Wk & Materials 7. ELECTRICAL WORKMANSHIP AND MATERIALS:7.1 Elec. Wk & Materials The wiring schematic must include SAE electric symbols to identify all components. MANDATORY Fully Meets

7.2 Elec. Wk & MaterialsAll interfaces between Chassis OEM wiring and added equipment must be shown to include electrical pin positions as arranged in the interface connections.


7.3 Elec. Wk & Materials All wire color-coding and/or wire numbers must be displayed to indicate different circuits. MANDATORY Fully Meets

7.4 Elec. Wk & MaterialsAll wire must be un-tinned stranded copper with cross-linked polyethylene insulation. Wires must be color coded. Wire runs and color coding must be continuous and terminate within a weatherproof junction box or weather pack connectors.


7.5 Elec. Wk & MaterialsUnless otherwise specified and except for multi-terminal connectors, solder less terminals must be used for all connections. Solder all ring terminals on ten (10) AWG and smaller wires must be insulated.


7.6 Elec. Wk & MaterialsInsulated ring terminals must meet military Specification. Military spec ring terminals have an extra copper sleeve around the terminal barrel that improves the holding force and reduces corrosion.


7.7 Elec. Wk & MaterialsButt splices must have moisture barriers and integral polyolefin heat shrinkable sleeves. Heat shrink tubing over non-sealed butt splices is not acceptable. MANDATORY

Fully Meets7.8 Elec. Wk & Materials Insulation-piercing connectors (scotch locks) must not be used. MANDATORY Fully Meets

7.9 Elec. Wk & MaterialsWires must be protected by looms, sleeving and grommets. Wire bundles must be routed away from moving parts and hot components. Wires must not be bundled with any electrical wiring or components.


7.10 Elec. Wk & Materials Plastic wire ties must be black ultraviolet-protected. MANDATORY Fully Meets7.11 Elec. Wk & Materials All chassis/body combination units must have a separate grounding strap installed from the body to the chassis. MANDATORY Fully Meets

7.12 Elec. Wk & Materials

Wire routing must ensure that the following requirements are met: Wires must not be routed closer than six (6) inches to exhaust components or other heat sources, unless they are shielded. Wires must not come in contact with moving parts.

MANDATORY

Fully Meets7.13 Elec. Wk & Materials Wires and wire harnesses must not be routed through holes or across sharp edges without protection from being chafed or cut. MANDATORY Fully Meets

7.14 Elec. Wk & MaterialsAll added 12 volt circuit wires must be AWG-14 minimum gage and conform to SAE J1128 GXL wire standard approved equivalent. Wire runs must be full length; splices are unacceptable.


7.15 Elec. Wk & Materials System must have twelve (12) volt auxiliary circuits available for lighting, cab, ancillary, etc. MANDATORY Fully Meets7.16 Elec. Wk & Materials 12 volt wire terminals must conform to MIL-T-7928, MS25036 (insulated, insulation grip) type II, class 2 or equivalent. MANDATORY Fully Meets

8.0Operator(s)-

Equipment Interface 8. Operator(s) - Equipment Interface:

8.1Operator(s)-Equipment

Interface Control Locations: The operator(s) stations(s), including safety devices, controls, and gauges must be accessible, readable, and visibility of the operator without distracting from the safe operational requirements of the equipment ordered.


9.0 Work Area Visibility 9. Work Area Visibility: 9.1 Work Area Visibility Visibility of the work area, road, etc., must be unobstructed, and provide for safe equipment operation. MANDATORY Fully Meets10.0 Welding 10. General Welding Requirements:

10.1 WeldingDistortion of assembled parts is not acceptable. All welds will have proper penetration and be relatively uniform in appearance. All welds must provide a metal-to-metal bond, using proper flux and/or welding materials. Continuous welds must be used wherever possible and practical.


10.2 Welding Body Fillers: The covering of welds with body fillers or similar practice is not acceptable. MANDATORY Fully Meets11.0 Training 11. Training

11.1 TrainingAll training must be scheduled and coordinated with Purchaser. Coordination will include dates, times, location, number of students per session, number of sessions required, facilities and training equipment and material.


11.2 TrainingAn on-site supervisor or the Equipment Training Manager will evaluate training sessions; who must determine whether or not the training wasadequate. If the training is deemed inadequate, Bidder must conduct additional training sessions, at no cost to the Purchaser, to the satisfaction ofthe Purchaser.


11.3 TrainingBidders must provide option to purchase on-site repair technician training and/or operator training per unit delivered at Purchasers chosen location, during Purchasers hours of operation, if selected by Purchaser.

MANDATORY SCORED Fully Meets

Enviro-Clean offers on-site repair technician training for $100.00 per hour. On site operator training $75.00 per hour.

11.4 Training Bidder should also provide option to purchase remote repair training and or operator training per unit delivered if selected by Purchaser. HIGHLY DESIRABLEFully Meets

Remote repair training available at $75.00 per hour and remote operator training available at $50.00 per hour

11.5Repair technician

trainingPerson(s) conducting repair technician training session(s) must have at least one year of experience in the performance of preventive maintenance and repair on the unit for which the training is being conducted or a factory/manufacture certified trainer.


11.6Repair technician

trainingRepair technician training must be designed to familiarize service and repair technicians with preventative maintenance checks and services, system diagnostics procedures, repairs, adjustments, and any unique requirements associated with the entire unit.


11.7 Operator Training Person(s) conducting the operator training session(s) must have a minimum of one year of experience in actually operating the unit for which training is being conducted or a factory/manufacture certified trainer.


11.8 Operator Training Operator training will be designed to familiarize personnel with the controls, safety features, operating characteristics and operator checks andservices.


11.9 Operator Training Operator training may include teaching operators shifting, acceleration, and braking techniques to maximize operational effectiveness of the unit'spower train configuration for equipment so configured. MANDATORY

SCOREDFully Meets

This can be done on-site or remote for the same hourly rates. Each new unit sale receives 4 hours of operator/safety training that is included with the delivery of the unit.

11.10 Training Other training options: Please explain other training that you would be able to provide , i.e. offsite training opportunities etc. DESIRABLE

Fully Meets

Nozzle Selection/Maintenance, Hose Safety and other expanded operator training is availble. Vac-Con Factory maintenance and trouble shooting training is available at the factory, or on-site at the local Enviro-Clean facility. We have worked with individual crews as they work the trucks to help them with operational questions and experiances. Prices on

these trainings will vari as many would be no charge. The more formal and factory trainings will be priced per event.

12.0 Delivery 12. Delivery 12.1 Delivery Delivery of product must be within 365 days of receipt of Purchase Order, or upon receipt of Purchaser Provided Chassis, whichever is later. MANDATORY Fully Meets

12.2 DeliveryDelivery fees for completely configured vehicles must be included in purchase prices offered on contract. Delivery fees for completely configured vehicles will not be allowed as a separate line item. Delivery fees for parts that are purchased separately as opposed to a complely configured vehicle are allowed as a separate line item.


12.3 Delivery Delivery of product(s) must be Free on Board (FOB) to location of Purchase Order address. MANDATORY Fully Meets13.0 Warranty 13. Warranty

13.1 WarrantyEquipment Contractors must provide technical support and reasonable equipment modifications for a period of 90 calendar days after the date the equipment is reported in service per manufacturer and/or factory warranty requirements. This is to ensure that the purchased equipment is capable of performing the specified operational functions.


13.2 WarrantyBidders must include, as part of the bid, the factory and/or manufacturer’s one year warranty, which must cover 100% parts and labor for the entireunit offered. This warranty must be honored by all authorized factory and/or manufacturer’s dealerships.


EXHIBIT C -Catch Basin Cleaners and Jet Rodder

Trucks (Various Sizes) BID PRICE EVALUATION (Rev

8.3.20):

Solicitation No. 00120BIDDER NAME:

Enviro-Clean Equipment

The Contract scope includes any equipment, options or additions in catalog related to Catch Basin Cleaners and/or Jet Rodder Trucks (Various Sizes)that meet Product Requirements as listed in Exhibit B.

Catalog LocationLink to MSRP Catalog: insert web address of catalog here, or attach copy in word document file format (.docx)

Category Discounts Payment Option Category Definition (Each category includes but is not limited to:) Manufacturer % Discount off MSRP

Chassis Chassis, including but not limited to 2 axle, 3 axle, 4 axle or 5 axle, of which Catch Basin and or Jet Rodder Equipment is mounted upon. International 0.0%

Kenworth 0.0%Freightliner 0.0%Peterbuilt 0.0%

Western Star 0.0%Mack 0.0%Volvo 0.0%

Catch Basin Cleaner Equipment

All eqipment needed for a fully configured Catch Basin Cleaner Truck. Including but not limited to the fresh water tanks, debris body, auxiliary engine, Vacuum system, Hydraulic Boom and Vacuum Hose, hoses and other equipment which would be sold as an entire unit. Chassis discounts are listed separately above. 11.0%

Electronic Funds Transfer (EFT) only Jet Rodder Equipment

Parts installed on truck to complete a Jet Rodder unit, including but not limited to High Pressure Water System, High Presssure Jet Hose, hose reel, Handgun System, hose attachments and fresh water tanks. These are purchased as an entire unit. 11.0%

OptionsItems selected by customer to add on to purchase of entire unit. This includes and is not

limited to Backup camera and or 360 camera provisions, and skid platforms, including hooklift configurations. 11.0%

Alternative Technology Equipment

All items/parts related to creating Catch Basin Cleaner and Jet Rodder trucks that run on alternative technology, including batteries or alternative fuels. Items may include but not

limited to, fully electric chassis, diesel/electric hybrids, motors, inverters, controllers, transmissions or other technologies appropriate to reduce greenhouse gasses for Catch Basin

Cleaner or Jet Rodder trucks 0.0%

P-card optional Parts OEM parts purchased to repair or replace parts on an existing truck in a customers existing fleet. Sold separately, by part. Not sold as entire new truck mounted unit. 5.0%

Payment Option Category Training RateTraining On-site repair technician training per unit delivered, up to 8 hr./day (hourly rate) * $100/hr.

Electronic Funds Training Remote option repair technician training, up to 8 hr./day (hourly rate)** $75/hr.Transfer Training On-site operator training per unit delivered, up to 8 hr./day (hourly rate) * $75/hr.(EFT) only Training Remote option operator training, up to 8 hr./day (hourly rate)** $50/hr.

Training Other training options as provided by bidder, (detailed in Exhibit B) $0 - $100/hr.

* On site training costs shall include all costs associated with training, including travel to and from site. No additional costs will be allowed. **Remote option means live interactive training delivered via the Internet on video conferencing software, with video and audio available.

Prices Exhibit B

MASTER CONTRACT NO. 00120 - Exhibit B (Rev. 2020-03-11)

1

3YD Combination

969 Hal Park Rd, Green Cove Springs, FL 32043

Tel: 904-284-4200 Fax: 904-284-3305

2 Stage Centrifugal Compressor (135" water, 8000 cfm)

Hydrostatic blower drive

3/16" 3.5 yd3 Corten Steel Debris Tank - 5 year warranty

Full opening rear door with mechanical rear door locks

5" Butterfly valve with 10' layflat hose

Debris tank Dumping: minimum 50 deg., hydraulic lift

500 gallons capacity Polyethylene water tank - 5 year warranty

6" vacuum intake hose

Boom travel tie down

6' Telescopic Boom

600' capacity (3/4") Front mounted / swiveling hose reel

30 gpm/3000 psi water pump system

400' high pressure jet rodder hose (3/4")

Hose rewind guide

Hose guide (Tiger Tail)

30" leader hose

600 psi wash down hand gun with 25' of hose and nozzle

Sealed and locking tool box

1) each sanitary and penetrator nozzles

20.5' aluminum intake pipe(1-3', 1-5', 1-6', and 1-6.5' nozzle)

1) 16" x 13" x 72" Tool box

ICC lighting

DuPont Elite Polyurethane Paint

12 month standard warranty - see certificate for details

5# Fire Extinguisher

Set of Triangles

Description Additional Info Cost

Models

230H/500 Single Engine $191,387.00

PD2130H/500 Single Engine - Includes 616 PD Blower $197,952.00

Mounting Charge $2,857.00

Booms

Prices Exhibit B


2

Telescopic, 6" Intake System - Standard $0.00

Telescopic, 8" Intake System - Optional (ilo 6") $1,691.00

Hose Reels

Replace Front Mounted Hose Reel with Hydro

Excavation Package For Hydro-Excavation unit $0.00

Front Mounted Swivel Hose Reel - standard with 3-

Yard $0.00

Hose Reel Options

Hose Footage Counter (Standard - Driver Side) $621.00

Hose Footage Counter (Curb Side) $621.00

Digital electronic footage counter Standard on Omnibus Precision Power(TM) $4,144.00

Metric Hose Counter (Driver Side) $621.00

HD Level Wind Guide Aluminum 711-53375 711-53375 $255.00

Water Systems

0-30 gpm/3000 psi water system, 3/4" hose Standard $0.00

Water System Options

Debris Body "Power Flush" System, 8 jets $2,082.00

Flush Out connection for rear door valve Pick one for each drain port needed $559.00

Centrifugal Compressor Fan Flush Out System $1,291.00

Winter Recirculating System for Rodder Hose, Front

Engine PTO

FEPTO or Aux Engine Driven Water

Pumps $1,108.00

Winter Recirculating connection for low pressure

circuit.

Requires winter recirculating system for

rodder hose. $279.00

Winter Recirculating connection for high pressure

circuit.

Requires winter recirculation system for


Artic Winter Recirculating System for rodder hose,

includes plumbing to upper water tanks. $1,393.00

Air Purge System $897.00

Drivers Side Hand Gun Connection $324.00

Rear Hand Gun Connection $324.00

Front Bumper Hand Gun Connection $375.00

Pre-Tank Water Filter (In-line) $375.00

Pre-Tank Water Filter (Y-type) $1,002.00

2Â½" Water Drain Gate Valve Assembly (cannot

choose both 2-1/2" gate valve and 1/4 turn ball

valve, only choose one)

Note: cannot choose both 2-1/2" gate valve

and 1/4 turn ball valve, only choose one. $316.00

1/4 turn ball valve water drain ( cannot choose both

2-1/2" gate valve and 1/4 turn ball valve, only

choose one)



Automatic Continuous Fill System $2,348.00

Prices Exhibit B


3

Variable Flow Valve (Valve Only ) - nozzles

required $464.00

50' Capacity Retractable Hand Gun Hose Reel Hose included $2,199.00

100' Capacity Handgun Hose Reel Hose Included $3,865.00

Pulsation Feature for Water Pump $6,055.00

Lateral Cleaning Kit w/150' x Â½" Hose w/Nozzle,

Dolly style mounts $3,416.00

Lateral Cleaning Kit w/200' x 1/2" Hose w/Nozzle,

Permanently Mtd, Electronically Controlled $6,306.00

Lateral Cleaning Kit w/400' Hose w/Nozzle,

Permanently Mtd, Hydraulically Controlled $7,889.00

Water Pump Remote Oil Drain $290.00

Chemical Tank (15) Gallons 120volt Pump with Invertor (Consult

Factory for Compatibility) 711-8088 $3,377.00

Boiler/Water Heater 900,000 BTU 667-0100 $24,983.00


Anti-Freeze System

17 gallon reservoir with ball valve for

changing system. System uses bio-

degradable anti-freeze only.

$2,187.00

Gate Valve at Water Pump Inlet $709.00

Hydroexcavation Pkg Inc- 50â€™ Handgun Hose

Reel w/ Â½â€� hose 72â€� X Â½â€� Sch. 80 QD

Lance w single Fwd Spray Nozzle, Storage Tubes

for Lances Heavy Duty Unloader Valve Main

Control Ball Valve Variable Flow Valve

$6,895.00

Water System Accessories

Hand Gun Assembly, Low Pressure Hand Gun Only - no hose $333.00

Hand Gun Assembly with 25' of Â½" hose, Low

Pressure $689.00

10' Hand Gun Hose Extension $123.00




Water Ring (Ring Only) $502.00

Hand Gun Bracket Assembly $78.00

Hand Gun Assembly (2) Handle with Adjustable

Spray $622.00

Cam-locks for Water Fill Hose $257.00

Cam-locks for Rear Drain Hose $362.00

Additional Water Tank Sight Guage (Drivers Side) $198.00

Prices Exhibit B


4

711-53686 Hydro. X Lance Assy. - Must Choose

Hydro X. Package - 72" with quick disconnects, 1/2

schedule 80, horizontal handle

Standard with Hydro. X Package -

Extensions are Available $0.00

711-30906 A 48" Extension for 711-53686 high-

pressure handwand

Must choose 711-53686 Hydro. X Lance

Assy. $184.00

711-TBA 72" Extension for 711-53686 high-

pressure handwand


Assy. $196.00

711-30903 High-pressure handwand 51"x1/2" S.S.,

pistol grip handle with adjustable handle (No

extensions available) - Single foward jet

No extensions available $1,144.00

711-30903T Turbo Jet with Single Foward Jet No extensions available $1,154.00

711-30903A Multiple Forward Jets with Chisel

Nozzle No extensions available $1,165.00

C70 Nozzle, WiFi Connected

WiFi connected C70 nozzle with heavy

duty camera with LED lights, protective

case,Tablet w/GPS, Pipeline Viewing

Software, Jet Inserts and Battery Charger.

(2) Skids to accommodate Pipe 1-6" and 1-

8"."

$20,571.00

Jet Rodder Hose

400' x 3/4" Jet Rodder Hose - Standard 3000 psi/7500 psi $0.00

500' x 3/4" Jet Rodder Hose 3000 psi/7500 psi $479.00


Spare Rolls of Jet Rodder Hose

400' Spare Roll of Jet Rodder Hose 3/4" 3000 psi or 1" 2500 psi $1,920.00



Debris Body Options

Hydraulic Rear Door Opener, removes door grabber Removes door grabber; Stand. on

Highdump; Not Available w/ Flatdoor $4,051.00

6" Knife Valve, Lower Rear Door Mounted with

Cam-Lock (Drain hose NOT included) (Drain hose NOT included) $2,160.00

6" Knife Valve with Center Post and Handle, in Lieu

of the 5" Butterfly Valve (662-0125) Standard drain hose included $788.00

8" Knife Valve, Lower Rear Door Mounted (Drain

hose NOT included) (Drain hose NOT included) $2,339.00

6" Air operated knife valve/Front Drivers Side

Mounted w/Cam-lock and 25' of layflat hose with

Cam-lock

$2,956.00

Debris Tank Inspection Hatch , 8" w/steps & handles $827.00

Prices Exhibit B


5

Gravity Drain System; plumbing to gate valve at

mid-passenger side of unit, allowing return of liquids

to the manhole

$2,019.00

Rear Splash Shield - Rear Flange Mounted Domed or Flat Door $2,037.00

Rear splash guard (2 - 10 O'clock) - tank mounted $2,834.00

Rear Splash Shield Diamond Plate Aluminum $3,960.00

Water Tank Side Panels, Diamond Plate Aluminum $1,828.00

Wear Plate, Swing Style $1,108.00

Rubber pad on standard deflector On flat door, will be on swing style wear

plate $546.00

Hydraulic Rear Door Locks $4,883.00

Automatic Vacuum Breaker $4,193.00

Hydraulic Pump Off System, 200 gpm w/lay flat

hose $8,956.00

Water & Debris Tanks Tied Together $2,527.00

Wear Plate to cover entire rear door, with hinge $1,075.00

Built in Body Prop - Rear Support Frame Mounted $503.00

Stainless Steel Float Ball in Lieu of Poly Float Ball $232.00

Rear Door Drain Valve Flush Out Connection Select per valve if multiple required $504.00

Stainless Steel Ball on Debris Body Level Indicator Replaces plastic $261.00

Screen assembly over drain port in debris tank MUST PICK PLACEMENT OF SCREEN

BELOW $479.00

Debris tank drain screen placement - Standard drain

valve

Must be used with "Debris tank drain screen

assembly" $0.00

Debris tank drain screen placement - Rear door

pump off


assembly" $0.00

Debris tank drain screen placement - Front debris

tank drain


assembly" $0.00

Debris tank drain screen placement - Front debris

tank pump off


assembly" $0.00

Electrical Options

Low Water Alarm with Light $545.00

Body Load Limit Alarm, Level Indicator $733.00

Remote Control (Wireless): Boom, Vacuum

Breaker, Throttle & Debris Body (includes Hi-

Dump, if applicable). Does not include remote cable

pendant controls for boom or hi dump.

Replaces Standard Pendant $4,981.00

4 Way Pendant Control Station $549.00

6 Way Pendant Control Station (Spare) $549.00

Grounding Cable with Screw Clamp & 25' of Cable $548.00

Prices Exhibit B


6

Back Up Alarm (Standard on Vac-Con 114SD Pool Trucks) $294.00

Grounding Mat $1,048.00

Digital Scale System Single Axle or Tandem Axle $7,597.00

Additional E-stop at Dump Station $473.00

Traffic Camera With Color Monitor - MUST PICK

CAMERA PLACEMENT Pick up to FOUR cameras maximum $1,279.00

Rear Camera Placement To be used with "Traffic Camera" option $592.00

Curbside Camera Placement - Mirror Mounted

Standard To be used with "Traffic Camera" option $592.00

Driver's Side Camera Placement - Mirror Mounted


Front Bumper Camera Placement To be used with "Traffic Camera" option $592.00

Front Hose Reel Camera Placement - To View in

Front of Hose Reel Area To be used with "Traffic Camera" option $592.00

360 Degree Camera $4,600.00

Lighting Options

Mirror Mounted LED Beacon/Strobe Light with

Limb Guard - Whelen L21HAP LED Beacon with

Whelen BGH Branch Guard

Please Indicate Driver Side or Passenger

Side; When (1) is selected, D/S is standard $994.00

LED strobe with Limb Guard, Rear Debris Tank

Mounted - Whelen L21HAP LED Beacon with


$994.00

LED 4 Strobes - (2) front bumper / (2) rear bumper -

Whelen 50A03ZCR - Amber $2,049.00

LED Arrow Board, Rear Debris Tank Door Mounted

- Whelen TA1251NF1 Traffic Arrow $3,997.00

LED Arrow stick - Whelen TAM85 Traffic Advisor $3,019.00

Arrow Board, D.O.T., WANCO, LED - Rear Debris

Tank Door Mounted $7,008.00

Hand Held Spot Light - LED $643.00

Hand Held Spot Light - LED with 50' Retractable

Cord $1,132.00

Hand Light Connection, Rear Dump Control

Location Reaches entire unit $129.00

LED Boom Mounted Flood Lights with Limb Guard

- Whelen NP6BB Worklight $789.00

LED Rear Mounted Flood Lights with Limb Guard -

Whelen NP6BB Worklight $789.00

LED Flood Light - Level Wind Guide with Limb

Guard - Whelen NP6BB Worklight $446.00

Prices Exhibit B


7

Midbody LED Strobes - Frame Mounted - Whelen

50A03ZCR - Amber

When picked with bumper strobes - (6)

strobes total $1,041.00

LED Midbody Flood Lights with guards - Whelen

NP6BB (Driverside and Curbside) $789.00

Misc Machine Options

Heavy Reinforced Elbow "Wear Back" $1,189.00

Heavy Duty Rubber Hose in lieu of Kanaflex

(replace standard) (Limits Boom Rotation) $1,384.00

Hydraulic Power Tool Option, front bumper control

valve mount location $3,629.00

Offset Manhole Roller 711-0050 $409.00

Grate Lifting Hook 711-9700 $478.00

Rear Mounted Tow Hooks $379.00

Remote Boom Grease Zerk Assembly (Ground

Level - includes water pump drive) - If Applicable $2,562.00

Remote Debris Tank Grease Assembly (Ground

Level) Does not include rollers or cams $2,760.00

Grease Assembly Articulating Hose Reel $1,183.00

Automatic Lube System - in addition to manual

remote grease options (Vac-Con Module) $5,678.00

Automatic Lube Kit for Centrifugal Compressor Available on 2-Stage or 3-Stage Blower $2,966.00

Plastic engraved decals - adhesive type (ilo standard) $1,837.00

Water Cooler Rack $329.00

Centrifugal Compressor Quiet Silencer, Class 4, 304

Stainless Steel Construction, 14in x 40in with 8in

discharge

$5,148.00

Spanish Decals $0.00

French Decals $0.00

Vanair PTO Shaft Driven Underdeck Mount Air

Compressor with Air Knife, Retractable Reel w/70' x

3/4" hose, 185 CFM at 100-150 psi rating. (Delete

driver side front water tank).

$31,551.00

12VDC Auxiliary Hydraulic Pump Back-up to standard hydraulic pump $3,280.00

Rear Bumper Assembly Standard on Hi-Dump $1,892.00

Long Handle Storage/PVC (2) - MUST SELECT

LOCATION BELOW $541.00

Long Handle Storage Placement - Mounted in

Storage Box Under Shelf Standard with Hydro-X package $0.00

Long Handle Storage Placement - Rear of

Mainframe

Must be picked with "Long Handle Storage/

PVC (2)" above - UNAVAILABLE ON

1500 GALLON UNITS

$0.00

Prices Exhibit B


8

Cone Storage Rack - MUST SELECT

PLACEMENT BELOW $447.00

Cone Storage Rack Placement - Rear of Frame Must be used with "Cone Storage Rack"

Option $0.00

Cone Storage Rack Placement - Best Location

Driver's Side

Must be used with "Cone Storage Rack"

option $0.00


Curbside


option $0.00

Cone Storage Rack Placement - Best Location - Vac-

Con to select


option $0.00

Cone Rack, Hinged Style/Deck $803.00

Cone Rack, Between Bogies, Tandem (2) racks included, one each side $594.00

Foot controls for Front Hose Reel $7,200.00

Front Bumper mount for Hydraulic Hammer $600.00

Setcom Intercom Headsets $750.00

Misc Accessories

Hose Guide, spare 665-0004 $194.00

Catch Basin Retriever 711-0371 $611.00

Manhole Cover Lifting Hook 681-0084 $117.00

5# Fire Extinguisher, spare (one is standard) $172.00

First Aid Kit 690-0500 $105.00

Triangle Kit 690-0494 (one is standard), spare $105.00

Grease Gun 690-0093 $85.00

Anti-Sail Mud Flaps (rear) $329.00

Vacuum Tubing

3' x 8" Aluminum Pipe Extension $261.00







6Â½' x 8" Catch Basin Nozzle with Serrated End $395.00


Non-conducting Catch Basin Nozzle $1,134.00

Leaf Nozzle, 25" x 8" No Holes $283.00

8" Adjustable Air Gap w/quick clamp (1) 8" quick clamp included $503.00

3' x 8" Clear Demo Tube 711-1255 $619.00

8" Flange to 6" Sleeve Adapter 800-0351 $205.00

Prices Exhibit B


9

8" Quick Clamp, spare, 680-0015 $43.00

8" Gasket with Holes 690-0025 $12.00

8" Rubber Debris Hose / Per Foot 680-0001 $89.00

8" Hose End 800-0097 $109.00

8" Power Clamp 680-0016 $123.00

Rubber Kanaflex hose end for CB

Tube/Hydroexcavation $126.00

5' x 6" Aluminum Pipe 6" Intake System $307.00



6" Quick Clamp 6" Intake System $58.00

6" Adjustable Air Gap 6" Intake System (1) 6" quick clamp

included $480.00

8" Flange to 6" Flange Adapter (800-0647) $216.00

6 1/2' x 6" Catch Basin Nozzle with Serrated End $231.00

Pipe Storage Racks - 4 standard per unit

Additional Pipe Rack(s), specify any requested

locations in comments section, otherwise

engineering will place in best available locations.

Specify any requested location in comments

section $202.00

Folding Pipe Rack (3), Mtd Rear Door $3,116.00

Folding Pipe Rack (3), Tank Mtd, Driver Side $3,116.00

Tool / Storage Boxes

35" x 14" x 24" Aluminum Side Mounted Tool Box,

ea (ilo steel) Consult factory for additional room $536.00

Tool box, 16" x 13" x 72", extra $963.00

2) Tool boxes, 16" x 13" x 72", steel $1,922.00

16x42x48 Steel Storage Box (Drivers Side Behind

Cab)

Consult factory for adaptability on tandem

axle units $1,246.00

16x42x48 Aluminum Storage Box (Drivers Side

Behind Cab)

consult factory for adaptability on tandem


(2) Front Bumper Tool Boxes 8"x14"x6" Aluminum 711-50463 Curbside/711-50484 Driver's

side $946.00

3/4" Spare Nozzles

3/4" Nozzle rack $128.00

3/4" 30 gpm - Standard Nozzle, spare $415.00


3/4" 30 gpm Penetrator Chisel - Standard, spare $476.00


3/4" Nozzle Pipe Assembly (skid), spare $110.00

3/4" 30 gpm Grenade Nozzle $891.00

Prices Exhibit B


10


Aluminum Storm Nozzle 3/4" 30 gpm $494.00


3/4" Storm Nozzle Pipe Assembly (skid) $110.00

3/4" 30 gpm Rotating Spinning Nozzle $1,049.00


3/4" Brass Flusher Nozzle $78.00

5/8" Spare Nozzles


1/2" 25 gpm - Penetrator Chisel - Standard, spare $476.00


1/2" 25 gpm - Grenade Nozzle $891.00





1" Spare Nozzles

Standard nozzle $415.00

Penetrator nozzle $476.00

Grenade nozzle $891.00

Spare Nozzles


Rotating Spinning Nozzle $1,049.00

Leader Hose

3/4" x 10' Length Leader Hose $289.00








3/4" x 30" Length Leader Hose, Spare $137.00

1/2" x 30" Length Leader Hose, spare $137.00

Swedge Tools

Hydraulic Swage Kit $3,127.00

Manual Swage Kit $2,049.00

3/4" Swage End $81.00

Prices Exhibit B


11

1/2" Swage End $81.00

3/4" Spare Nozzles

1" Bulldog with skid 400.600BS $3,727.00

3/4" Bulldog 400.060A $3,397.00

Root Cutter

Rotating Turbine Chain Scraper 5"-10" with skids &

chain 10.125TR6-10 $4,498.00

Rotating Turbine Chain Scraper with skids and

Chain 10.125TR8-12 set $4,711.00

1" to 3/4" Bushing for Chain Scraper $21.00

Manuals

Electronic Vac-Con Manual (Thumb Drive), spare One electronic manual standard per unit $213.00

Paper Vac-Con Manual - No longer standard $213.00

Paint - Module Options

Ceramic Coating in Debris Tank, Single Axle $4,981.00

Paint Module: Single-Stage Polyeurethene Elite

White (white is standard unless otherwise specified.

PPG code: 940813)

$0.00


School Bus Yellow (PPG code: 916352) $0.00


Safety Yellow (PPG code: 920225) $0.00


Coca Cola Red (PPG code: 911065) $0.00


Candy Apple Red (PPG code: 918623) $0.00


Medium Blue (PPG code: 918345) $0.00


Deep Blue (PPG code: 918377) $0.00


Pepsi Blue (PPG code: 946949) $0.00


Omaha Orange (PPG code: 917204) $0.00

Paint Module: Single-Stage Polyeurethene Elite Cat

Yellow (PPG code: 920339) $0.00


Lime Green (PPG code: 905804) $0.00


Green (PPG code: 918367) $0.00

Prices Exhibit B


12


Woodland Green (PPG code: 918359) $0.00

Undercoat - Vac-Con Module & Chassis $2,241.00

Metallic paint Option $9,106.00

Painted steel upper water tank panels in lieu of

standard aluminum diamond plate $611.00

Paint - Module Stripe Options

Reflective Striping, Other than standard colors Avail colors: Black, Red, Orange, Yellow,

Green, Pink $739.00

Standard Striping Package - White 692-5204-01 $0.00

Standard Striping Package - Blue 692-5204-02 $0.00

Paint - Chassis Options

Chassis Dealer to Paint Cab - Specify Color $5,356.00

Paint Chassis Hood Flat Black $825.00

Paint - Chassis Stripe Options

Cab "Z" Striping Package, specify Color Avail colors: White, Blue, Black, Red,

Orange, Yellow, Green $1,338.00

Cab "Small Stripes" Striping Package, Specify Color See available colors $1,338.00

Cab Painted with Flames $3,339.00

Extended Warranties

Gas Engine Extended Warranty - 5YRS/5000HRS $5,356.00

Pool Trucks (Chassis)

Mack CDL/Non-CDL Available – Call for Quote

Freightliner CDL/Non-CDL Available – Call for Quote

International CDL/Non-CDL Available – Call for Quote

Peterbilt CDL/Non-CDL Available – Call for Quote

Kenworth CDL/Non-CDL Available – Call for Quote

Western Star CDL/Non-CDL Available – Call for Quote

Prices Exhibit B


13

Dual Engine Combination


Tel: 904-284-4200 Fax: 904-284-3305

Vacuum System (as specified by Model Number)

3/16" Corten Steel Debris Tank - (size as specified by model number)

Full opening rear door

Hydraulic rear door locks, with door grabber with safety latch


Debris tank Dumping: minimum 50 deg., hydraulic scissors lift - power up/power down

Polyethylene water tank

Automatic Vacuum Breaker and overfill protection



4 Way hydraulic boom with 270 deg. Rotation and joystick controls

Front mounted 600' capacity (1" hose)/hydraulic hose reel


Water pump drive: Standard Aux Engine is WSG-1068 6.8 Litre, 10-Cylinder, Gas Engine 222HP @ 3200 rpm

400' high pressure jet rodder hose (1" or 3/4")

Manual hose rewind guide


30" leader hose

20 gpm at 600 psi wash down hand gun with 25' of hose and nozzle

Sealed and locking tool box (es) {as indicated by model number}



ICC lighting



-

Note: PD Units Include Price for required Hydrostatic Drive Option.


Set Triangles

Hydrostatic Blower Drive


Debris Body Options

Prices Exhibit B


14

Dump High Option This option allows the operator higher debris

body dumping $2,679.00

Electrical Options

6 Way Pendant Control $549.00


Transfer case blower drive ILO FEPTO Addition of a Transfer Case when FEPTO is

Unavailable $15,426.00

Remote Transfer Case Engagement $2,500.00

Water Systems

50/3000, GIANT 7000, GM 5.7 GAS 140 HP $0.00

50/3000, GIANT 7000, GM 5.7 GAS 140 HP

With Aux Engine Hydraulics (Pump Off Not

Available)


Available) $1,397.00

50/3000, GIANT 7000, GM 8.8 GAS 208HP * $19,432.00

50/3000, GIANT 7000, GM 8.8 GAS 208HP *

With Aux Engine Hydraulics With Aux Engine Hydraulics $20,829.00

50/3000, GIANT 7000, JD 4 CYL TIER 4

DIESEL 140HP $36,587.00

50/3000, GIANT 7000, JD 4 CYL TIER 4

DIESEL 140HP With Aux Engine Hydraulics

(Pump Off Not Available)



50/3000, GIANT 7000, JD 6 CYL TIER 4

DIESEL 225 HP $62,783.00

50/3000, GIANT 7000, JD 6 CYL TIER 4

DIESEL 225 HP With Aux Engine Hydraulics With Aux Engine Hydraulics $64,180.00

50/3000, GIANT 7000, JD 4CYL TIER 3

DIESEL 140HP EXPORT ONLY EXPORT ONLY $7,796.00

80/2500, FMC, JD 4 CYL TIER 4 DIESEL 140

HP $39,623.00

80/2500, FMC, GM 8.8 GAS 208 HP * $21,071.00

80/2500, FMC, GM 8.8 GAS 208 HP * With

Aux Engine Hydraulics With Aux Engine Hydraulics $22,468.00


HP $65,819.00


HP With Aux Engine Hydraulics With Aux Engine Hydraulics $67,216.00

80/2500, FMC, JD 4CYL TIER 3 DIESEL

140HP EXPORT ONLY EXPORT ONLY $10,831.00

60/3000, GIANT 7000, GM 5.7 GAS 140 HP $0.00

60/3000, GIANT 7000, JD 4 CYL TIER 4

DIESEL 140 HP $36,587.00

Prices Exhibit B


15

60/3000, GIANT 7000, GM 8.8 GAS 208 HP * $19,432.00

60/3000, GIANT 7000, GM 8.8 GAS 208 HP

With Aux Engine Hydraulics * With Aux Engine Hydraulics $20,829.00

60/3000, GIANT 7000, JD 6 CYL TIER 4

DIESEL 225 HP $62,783.00

60/3000, GIANT 7000, JD 6 CYL TIER 4


60/3000, GIANT 7000, JD 4 CYL TIER 3

DIESEL 140 HP EXPORT ONLY EXPORT ONLY $7,796.00

65/3000, GIANT 8000, GM 8.8 GAS 208 HP * $25,642.00

65/3000, GIANT 8000, GM 8.8 GAS 208 HP*


65/3000, GIANT 8000, JD 6 CYL TIER 4

DIESEL 225 HP $68,993.00

65/3000, GIANT 8000, JD 6 CYL TIER 4


65/3000, GIANT 8000, JD 4 CYL TIER 3


80/3000, FMC, GM 8.8 GAS 208 HP * $21,071.00

80/3000, FMC, GM 8.8 GAS 208 HP * With



HP $65,819.00


HP With Aux Engine Hydraulics With Aux Engine Hydraulics $67,216.00


HP EXPORT ONLY EXPORT ONLY $18,765.00

80/3000, GIANT 8000, GM 8.8 GAS 208 HP * $25,642.00

80/3000, GIANT 8000, GM 8.8 GAS 208 HP *


80/3000, GIANT 8000, JD 6 CYL TIER 4

DIESEL 225 HP $68,993.00

80/3000, GIANT 8000, JD 6 CYL TIER 4


80/3000, GIANT 8000, JD 6 CYL TIER 3


100/2000, FMC, GM 8.8 GAS 208 HP *

Includes Larger Hose Reel & 500' of 1 1/4

Rodder Hose


Rodder Hose $36,730.00

100/2000, FMC, JD 6 CYL TIER 4 DIESEL

225 HP Includes Larger Hose Reel & 500' of 1

1/4 Rodder Hose

Includes Larger Hose Reel & 500' of 1 1/4"


Prices Exhibit B


16

120/2000,GIANT 8000 , GM 8.8 GAS 208 HP

* Includes Larger Hose Reel & 500' of 1 1/4"

Rodder Hose



120/2000,GIANT 8000 , JD 6 CYL TIER 4

DIESEL 225 HP Includes Larger Hose Reel &

500' of 1 1/4" Rodder Hose



80/2000, GIANT 7000, GM 5.7 GAS 140 HP $0.00

80/2000, GIANT 7000, GM 8.8 GAS 208HP * $19,432.00

80/2000, GIANT 7000, GM 8.8 GAS 208HP *


80/2000, GIANT 7000, JD 4 CYL TIER 4

DIESEL 140HP $36,587.00

80/2000, GIANT 7000, JD 4 CYL TIER 4





80/2000, GIANT 7000, JD 6 CYL TIER 4

DIESEL 225 HP $62,783.00

80/2000, GIANT 7000, JD 6 CYL TIER 4




60/2000, GIANT 7000, GM 5.7 GAS 140 HP $0.00

60/2000, GIANT 7000, GM 5.7 GAS 140 HP


Available)



60/2000, GIANT 7000, GM 8.8 GAS 208HP * $19,432.00

60/2000, GIANT 7000, GM 8.8 GAS 208HP *


60/2000, GIANT 7000, JD 4 CYL TIER 4

DIESEL 140HP $36,587.00

60/2000, GIANT 7000, JD 4 CYL TIER 4





60/2000, GIANT 7000, JD 6 CYL TIER 4

DIESEL 225 HP $62,783.00

60/2000, GIANT 7000, JD 6 CYL TIER 4




Models

Prices Exhibit B


17

250H/650

Includes: 2 Stage Vac-Con Blower, Hydrostatic

Drive, 5 CY Debris Tank, 650 Gal H2O, 4X2

and Rolling Bogies

$192,710.00

350H/650


Drive, 5 CY Debris Tank, 650 Gal H2O, 4X2

and Rolling Bogies

$204,829.00

250H/850 Includes: 2 Stage Vac-Con Blower, 5 CY Debris

Tank, 850 Gal H2O, 4X2 and Rolling Bogies $201,680.00








Tank, 850 Gal H2O, 4X2 $198,714.00


Tank, 1000 Gal H2O, 4X2 $200,185.00


Tank, 850 Gal H2O, 4X2 $209,449.00


Tank, 1000 Gal H2O, 4X2 $211,392.00

211HE/850

Includes: 2 Stage Vac-Con Blower, 11 CY

Debris Tank, 850 Gal H2O, 6X4, Extended

Frame

$210,048.00

211HE/1000



Frame

$211,705.00

211HE/1300



Frame

$217,568.00

211HE/1500


Debris Tank, 1500 Gal H2O, Extended Frame,

6x4. Cannot be used with High Dump.

$221,492.00

311HE/850



Frame

$221,296.00

311HE/1000



Frame

$222,953.00

311HE/1300



Frame

$228,712.00

Prices Exhibit B


18

311HE/1500



6X4. Cannot be used with High Dump.

$234,705.00

212HE/850



Frame

$215,536.00

212HE/1000



Frame

$217,354.00

212HE/1300



Frame

$223,456.00

312HE/850



Frame

$226,753.00

312HE/1000



Frame

$228,712.00

312HE/1300



Frame

$234,508.00

212HE/1500




$229,453.00

312HE/1500




$240,502.00

216HE/1300


Debris Tank with Flat Style Rear Door, 1300 Gal

H2O, 6X4. Consult Factory on Rear Axle

Requirements, Extended Frame

$237,562.00

316HE/1300





$248,947.00

216HE/1500



H2O, Extended Frame, 6X4. Consult Factory on

Rear Axle Requirements

$244,499.00

316HE/1500




Rear Axle Requirements. Cannot be used with

High Dump.

$255,973.00

Prices Exhibit B


19

PD3550H/850 (624 at 18")

Includes: Roots 624 PD Blower Free Air up to

3670 CFM (2650 CFM at 18" HG), Hydrostatic

Drive, Cyclone Separator, 5 CY debris Tank, 850

Gal H2O, 4X2 and Rolling Bogies

$234,786.00

PD3590H/850 (624 at 18")



Drive, Cyclone Separator, 9 CY Debris Tank,

850 Gal H2O, 4X2 and Rolling Bogies

$231,840.00

PD3550H/1000 (624 at 18")



Drive, Cyclone Separator, 5 CY Debris Tank,

1000 Gal H2O, 4X2 and Rolling Bogies

$233,807.00

PD3590H/1000 (624 at 18")



Drive and Cyclone Separator, 9 CY Debris Tank,

1000 Gal H2O, 4X2

$233,807.00

PD3511HE/1000 (624 at 18")



Drive and Cyclone Separator, 11 CY Debris

Tank, 1000 Gal H2O, 6X4, Extended Frame

$245,342.00

PD3511HE/850 (624 at 18")





$243,387.00

PD3511HE/1300 (624 at 18")





$249,130.00

PD3511HE/1500 (624 at 18")




Tank, 1500 Gal H2O, Extended Frame, 6X4.

Cannot be used with High Dump.

$255,390.00

PD3512HE/850 (624 at 18")



Drive and Cyclone Separator, 12 Cy Debris


$247,174.00

PD3512HE/1000 (624 at 18")



Drive and Cyclone Separator, 12 Cy Debris


$249,130.00

PD3512HE/1300 (624 at 18") Includes: Roots 624 PD Blower Free Air up to

3670 CFM (2650 CFM at 18" HG), Hydrostatic $254,995.00

Prices Exhibit B


20



PD3512HE/1500 (624 at 18")






$260,98800

PD3516HE/1300 (624 at 18")



Drive, Cyclone Separator, 16 CY Debris Tank

with Flat style rear door, 1300 Gal H2O, 6X4.

Consult Factory on Rear Axle Requirements,

Extended Frame

$269,095.00

PD3516HE/1500 (624 at 18")




Tank with Flat style rear door, 1500 Gal H2O,

Extended Frame, 6X4. Consult Factory on Rear

Axle Requirements. Cannot be used with High

Dump

$274,898.00

PD3650H/850 (824 at 18")

Includes: Roots 824 RCS PD Blower Free Air up

to 5197 CFM (4000CFM at 18" HG), Hydrostatic

Drive 3600 cfm at 16" and Cyclone Separator, 5

CY Debris Tank, 850 Gal H2O, 4X2 and Rolling

Bogies

$235,864.00

PD3650H/1000 (824 at 18")



Drive 3600 cfm at 16" and Cyclone Separator, 5

CY Debris Tank, 1000 Gal H2O, 4X2 and

Rolling Bogies

$237,824.00

PD3690H/850 (824 at 18")


to 5197 CFM (4000 CFM at 18" HG),

Hydrostatic Drive and Cyclone Separator, 9 CY

Debris Tank, 850 Gal H2O, 4X2

$232,918.00

PD3690H/1000 (824 at 18")


to 5197 CFM (4000 CFM at 18" HG),



$234,874.00

PD3611HE/850 (824 at 18")





$244,450.00

PD3611HE/1000 (824 at 18") Includes: Roots 824 RCS PD Blower Free Air up

to 5197 CFM (4000 CFM at 18" HG), $246,408.00

Prices Exhibit B


21



Frame

PD3611HE/1300 (824 at 18")





$250,329.00

PD3611HE/1500 (824 at 18")






$256,186.00

PD3612HE/850 (824 at 18")


to 5197 CFM (4000 CFM at 18" HG),



Frame

$249,318.00

PD3612HE/1000 (824 at 18")


to 5197 CFM (4000 CFM at 18" HG),



Frame

$251,275.00

PD3612HE/1300 (824 at 18")


to 5197 CFM (4000 CFM at 18" HG),



Frame

$255,942.00

PD3612HE/1500 (824 at 18")


to 5197 CFM (4000 CFM at 18" HG),


Debris Tank, 1500 Gal H2O,Extended Frame,


$270,159.00

PD3616HE/1300 (824 at 18")


to 5197 CFM (4000 CFM at 18" HG),





$270,159.00

PD3616HE/1500 (824 at 18")


to 5197 CFM (4000 CFM at18" HG), Hydrostatic


Tank with Flat Style Rear Door, 1500 Gal H2O,

Extended Frame, 6X4. Consult Factory on Rear

Axle Requirements. Cannot be used with High

Dump.

$275,979.00

Prices Exhibit B


22

PD4250H/850 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),


Debris Tank, 850 Gal H2O, 4x2 and Rolling

Bogies

$240,169.00

PD4250H/1000 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),


Debris Tank, 1000 Gal H2O, 4X2 and Rolling

Bogies

$242,128.00

PD4290H/850 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),

Hydrostatic Drive and Cyclone Separator, 9 Cy


$237,220.00

PD4290H/1000 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),



$239,176.00

PD4211HE/850 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),



Frame

$248,753.00

PD4211HE/1000 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),



Frame

$250,708.00

PD4211HE/1300 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),



Frame

$254,494.00

PD4211HE/1500 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),




$260,489.00

PD4212HE/850 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),



Frame

$253,620.00

Prices Exhibit B


23

PD4212HE/1000 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),

Hydrostatic Drive and Cyclone Separator,12 CY


Frame

$255,905.00

PD4212HE/1300 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),



Frame

$260,380.00

PD4212HE/1500 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),




$266,340.00

PD4216HE/1300 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),

Hydrostatic Drive and Cyclone Separator, 16 Cy




$274,460.00

PD4216HE/1500 (827 at 18")


to 6000 CFM (4500 CFM at 18" HG),





High Dump.

$280,265.00

PD1212HE/1500 (721 at 27" or 16")

Includes: Roots 721 DVJ PD Blower Free Air up

to 3658 CFM (1600 CFM at 27" HG or 3300

CFM at 16" HG), Hydrostatic Drive and Cyclone

Separator

$278,142.00

PD1212HE/1300 (721 at 27" or 16")


to 3658 CFM (1600 CFM at 27" HG or 3300


Separator

$272,186.00

PD1212HE/1000 (721 at 27" or 16")


to 3658 CFM (1600 CFM at 27" HG or 3300


Separator

$267,379.00

Booms

Fixed Boom - Standard $0.00

6' Aluminum Telescoping Boom with Pendant

Control Station $9,782.00

Prices Exhibit B


24



6' Aluminum Telescoping Boom with 10" Inlet

and Pendant Control Station

10" Boom Inlet, Boom and Elbow with 10" to 8"

Adapter & 8" hose $16,871.00

10' Aluminum Telescoping Boom with 10"

Inlet and Pendant Control Station


Adapter & 8" hose $21,767.00

8' Aluminum Telescoping Rear Boom with

Pendant Control Station $14,680.00

Blower Drives

Hydrostatic Drive Included in base price $0.00

Hose Reels

Front Mounted, Fixed, Standard $0.00

Front Mounted, Fixed, 800' (1") Capacity $3,743.00

Front Mounted, Articulating to Driver Side

(Std Pivot) $14,509.00

Front Mounted, Articulating to Driver Side,

800' (1") Capacity (Std. Pivot) $18,248.00

Front Mounted, Articulating to Passenger Side

(Reverse Pivot) $14,554.00

Front Mounted, Articulating to Passenger Side,

800' (1") Capacity (Reverse Pivot) $18,296.00

Rear Mounted, Articulating Hose Reel Pivot to Driver's Side $17,627.00

Rear Mounted, Articulating Hose Reel, 800'

Capacity Pivot to Driver's Side $21,367.00

Front Mounted Swivel Hose Reel, 600' (1")

Capacity $10,125.00

Rear Mounted Swivel Hose Reel, 600' (1")

Capacity $10,125.00

Hose Reel Options

Hose Reel Cage $1,247.00

Power Guide "Reel Power" level wind guide $5,434.00

Electro Magnet for outrigger leg $5,221.00

Pinch Roller/Tensioner Device Unable to add with hose reel cage $2,471.00

Hose Footage Counter (Standard - Driver Side) $621.00





Water Systems

Prices Exhibit B


25

120 gpm/2000 psi Water System (includes 500'

x 1Â¼" Hose & 800' Capacity Reel) $25,982.00




Centrifugal Compressor Fan Flush Out System $1,291.00


Winter Recirculating System for Rodder Hose,

Front Engine PTO FEPTO or Aux Engine Driven Water Pumps $1,108.00

Winter Recirculating connection for low

pressure circuit.

Requires winter recirculating system for rodder

hose. $279.00

Winter Recirculating connection for high

pressure circuit.

Requires winter recirculation system for rodder

hose. $479.00

Artic Winter Recirculating System for rodder

hose, includes plumbing to upper water tanks. $1,393.00







2Â½" Water Drain Gate Valve Assembly

(cannot choose both 2-1/2" gate valve and 1/4

turn ball valve, only choose one)

Note: cannot choose both 2-1/2" gate valve and

1/4 turn ball valve, only choose one. $316.00

1/4 turn ball valve water drain ( cannot choose

both 2-1/2" gate valve and 1/4 turn ball valve,

only choose one)




Folding Spray Bar Assembly with In Cab

Controls $4,047.00


required $464.00



Water Ring Assembly (inlet mounted) $2,381.00


Lateral Cleaning Kit w/150' x Â½" Hose

w/Nozzle, Dolly style mounts $3,416.00

Lateral Cleaning Kit w/200' x 1/2" Hose

w/Nozzle, Permanently Mtd, Electronically

Controlled

$6,306.00

Prices Exhibit B


26



Street Flusher, 450 GPM, air actuated spray

heads, includes water and debris tanks tied

together

Consult factory for adaptability for Single Engine

Design $35,800.00


Chemical Tank (15) Gallons 120volt Pump with Invertor (Consult Factory for

Compatibility) 711-8088 $3,377.00



Anti-Freeze System

17 gallon reservoir with ball valve for changing

system. System uses bio-degradable anti-freeze

only.

$2,187.00

Provision for Dealer/Customer installed

Vaporooter Commander Specify Desired Location $0.00


Water Pump Flow Meter - Omnibus Units Only $2,306.00

Hydroexcavation Pkg Inc- 50â€™ Handgun

Hose Reel w/ Â½â€� hose 72â€� X Â½â€�

Sch. 80 QD Lance w single Fwd Spray Nozzle,

Storage Tubes for Lances Heavy Duty

Unloader Valve Main Control Ball Valve

Variable Flow Valve

$6,895.00

Electronic Titan Style Water Level Gauge $1,656.00



Hand Gun Assembly with 25' of Â½" hose,

Low Pressure $689.00







Hand Gun Assembly (2) Handle with

Adjustable Spray $622.00



Additional Water Tank Sight Guage (Drivers

Side) $198.00

Prices Exhibit B


27

711-53686 Hydro. X Lance Assy. - Must

Choose Hydro X. Package - 72" with quick

disconnects, 1/2 schedule 80, horizontal handle

Standard with Hydro. X Package - Extensions are

Available $0.00

711-30906 A 48" Extension for 711-53686

high-pressure handwand Must choose 711-53686 Hydro. X Lance Assy. $184.00


pressure handwand Must choose 711-53686 Hydro. X Lance Assy. $196.00

711-30903 High-pressure handwand 51"x1/2"

S.S., pistol grip handle with adjustable handle

(No extensions available) - Single foward jet






WiFi connected C70 nozzle with heavy duty

camera with LED lights, protective case,Tablet

w/GPS, Pipeline Viewing Software, Jet Inserts

and Battery Charger. (2) Skids to accommodate

Pipe 1-6" and 1-8"."

$20,571.00

Jet Rodder Hose




700' x 3/4" Jet Rodder Hose - (non-continuous) 3000 psi/7500 psi $1,432.00


1000' x 3/4" Jet Rodder Hose - (non-

continuous) 3000 psi/7500 psi $2,863.00

400' x 1" Jet Rodder Hose - Standard 2500 psi/6250 psi $0.00

500' x 1" Jet Rodder Hose 2500 psi/6250 psi $479.00


700' x 1" Jet Rodder Hose - (non-continuous) Requires large hose reel - 2500 psi/6250 psi $1,432.00


400' x 1" - 3000 psi Jet Rodder hose 3000 psi/7500 psi $692.00

500' x 1" - 3000 psi Jet Rodder Hose 3000 psi/7500 psi $1,383.00


700' x 1" 3000 psi - Jet Rodder Hose - (non-

continuous) Requires large hose reel - 3000 psi/7500 psi $2,379.00



500' x 1Â¼" Jet Rodder Hose Standard on 120 gpm water system - 2500

psi/6250 psi $0.00

800' x 3/4" Jet Rodder Hose - Continuous 3000 psi/7500 psi $4,117.00

Prices Exhibit B


28

800' x 1" Jet Rodder Hose - Continuous 2500 psi/6250 psi $4,117.00

800' x 1" 3000 psi - Jet Rodder Hose -

Continuous 3000 psi/7500 psi $5,553.00





Debris Body Options

Hydraulic Rear Door Opener, removes door

grabber

Removes door grabber; Stand. on Highdump;

Not Available w/ Flatdoor $4,051.00

6" Knife Valve, Lower Rear Door Mounted

with Cam-Lock (Drain hose NOT included) (Drain hose NOT included) $2,160.00

6" Knife Valve with Center Post and Handle, in

Lieu of the 5" Butterfly Valve (662-0125) Standard drain hose included $788.00


(Drain hose NOT included) (Drain hose NOT included) $2,339.00


Mounted w/Cam-lock and 25' of layflat hose

with Cam-lock

$2,956.00

Debris Tank Inspection Hatch , 8" w/steps &

handles $827.00

Rear, Hydraulic Pump Off System, 200 GPM

w/20' lay flat Hose Optional pump placement below $8,487.00



Rear, Hydraulic Pump Off System, 400 gpm

with 20' lay flat hose Optional pump placement below $11,008.00





Gravity Drain System; plumbing to gate valve

at mid-passenger side of unit, allowing return

of liquids to the manhole

$2,019.00

High Dump Option, Single Axle (9 Yard) Includes: Rear Hydraulic Door Opener and

wireless remote pendant $22,640.00

High Dump Option, Tandem Axle Includes: Rear Hydraulic Door Opener and


A Flat Style Rear Door ilo Dome Style Door

Including Hydraulic Opener will be Provided A Wear Plate, Swing Style is Included $5,816.00


Prices Exhibit B


29

Rear splash guard (2 - 10 O'clock) - tank

mounted $2,834.00


Vacuum Enhancer, Fan or PD, Air Operated $5,222.00


Rubber pad on standard deflector On flat door, will be on swing style wear plate $546.00

Electric Vibrator $4,535.00

Wear Plate to cover entire rear door, with hinge $1,075.00

Built in Body Prop - Rear Support Frame

Mounted $503.00

Stainless Steel Float Ball in Lieu of Poly Float

Ball $232.00

Move Pump Off to Front, Driver's Side of

Debris Tank

Must be used with "Rear Pump Off System"

option $828.00

Move Pump Off to Front, Curbside of Debris

Tank


option $828.00


Stainless Steel Ball on Debris Body Level

Indicator Replaces plastic $261.00


BELOW $479.00

Debris tank drain screen placement - Standard

drain valve


assembly" $0.00

Debris tank drain screen placement - Rear door

pump off


assembly" $0.00

Debris tank drain screen placement - Front

debris tank drain


assembly" $0.00


debris tank pump off


assembly" $0.00

Electrical Options



Rear Axle Load Limit Alarm $992.00

Front Axle Load Limit Alarm $992.00

Auxiliary Engine Kill Switch (Vandalism

Protection) $144.00


Breaker, Throttle & Debris Body (includes Hi-

Dump, if applicable). Does not include remote

cable pendant controls for boom or hi dump.



Prices Exhibit B


30


Grounding Cable with Screw Clamp & 25' of

Cable $548.00

Hi Dump pendant control station with 25' cable $445.00





Traffic Camera With Color Monitor - MUST

PICK CAMERA PLACEMENT Pick up to FOUR cameras maximum $1,279.00




Driver's Side Camera Placement - Mirror

Mounted Standard To be used with "Traffic Camera" option $592.00


Front Hose Reel Camera Placement - To View

in Front of Hose Reel Area To be used with "Traffic Camera" option $592.00


Omnibus Precision Power System (OPP)-

Electronic Controller System-Includes: a color

monitor, electronic footage counter, and

pressure compensated hydraulics.

AVAILABLE: DUAL AND SINGLE ENG

MACHINES.

Compatible chassis: Freightliners with Cummins

ISL and Detroit Diesel DD13, International with

N-10, and Peterbilt with ISL and PX

$5,887.00

Lighting Options

Mirror Mounted LED Beacon/Strobe Light

with Limb Guard - Whelen L21HAP LED

Beacon with Whelen BGH Branch Guard

Please Indicate Driver Side or Passenger Side;

When (1) is selected, D/S is standard $994.00

LED strobe with Limb Guard, Rear Debris

Tank Mounted - Whelen L21HAP LED Beacon

with Whelen BGH Branch Guard

$994.00

LED 4 Strobes - (2) front bumper / (2) rear

bumper - Whelen 50A03ZCR - Amber $2,049.00

LED Arrow Board, Rear Debris Tank Door

Mounted - Whelen TA1251NF1 Traffic Arrow $3,997.00

LED Arrow stick - Whelen TAM85 Traffic

Advisor $3,019.00

Arrow Board, D.O.T., WANCO, LED - Rear

Debris Tank Door Mounted $7,008.00


Prices Exhibit B


31

Hand Held Spot Light - LED with 50'

Retractable Cord $1,132.00



LED Boom Mounted Flood Lights with Limb


LED Rear Mounted Flood Lights with Limb


LED Flood Light - Level Wind Guide with

Limb Guard - Whelen NP6BB Worklight $446.00

Midbody LED Strobes - Frame Mounted -

Whelen 50A03ZCR - Amber

When picked with bumper strobes - (6) strobes

total $1,041.00

LED Midbody Flood Lights with guards -

Whelen NP6BB (Driverside and Curbside) $789.00





Auxiliary engine control panel (lockable door) For use with Deutz & JD Auxiliary Engines $353.00

Cyclone Separator, add on for fan units, consult

factory for adaptability

Contact factory for adaptability. Standard on PD

units. $5,251.00

Hydraulic Power Tool Option, front bumper

control valve mount location $3,629.00

Hydraulic Power Tool Option, Rear Bumper

Control Valve Mount Location $4,153.00




Auxiliary Engine Remote Oil Drain $297.00

Remote Boom Grease Zerk Assembly (Ground

Level - includes water pump drive) - If

Applicable

$2,562.00

Remote Debris Tank Grease Assembly

(Ground Level) Does not include rollers or cams $2,760.00


Remote Hi-Dump Grease Assembly (Single

Axle) $2,024.00

Remote Hi-Dump Grease Assembly (Tandem

Axle) $2,421.00



Prices Exhibit B


32

Automatic Lube Kit for Centrifugal

Compressor Available on 2-Stage or 3-Stage Blower $2,966.00

Hydraulic System Temperature Gauge $348.00

Vacuum gauge front bumper location behind

reel $603.00

Plastic engraved decals - adhesive type (ilo

standard) $1,837.00


Centrifugal Compressor Quiet Silencer, Class

4, 304 Stainless Steel Construction, 14in x 40in

with 8in discharge

$5,148.00


French Decals $0.00

Vanair PTO Shaft Driven Underdeck Mount

Air Compressor with Air Knife, Retractable

Reel w/70' x 3/4" hose, 185 CFM at 100-150

psi rating. (Delete driver side front water tank).

$31,551.00



Long Handle Storage/PVC (2) - MUST

SELECT LOCATION BELOW $541.00




Mainframe

Must be picked with "Long Handle Storage/ PVC

(2)" above - UNAVAILABLE ON 1500

GALLON UNITS

$0.00



Cone Storage Rack Placement - Rear of Frame Must be used with "Cone Storage Rack" Option $0.00


Driver's Side Must be used with "Cone Storage Rack" option $0.00


Curbside Must be used with "Cone Storage Rack" option $0.00

Cone Storage Rack Placement - Best Location -

Vac-Con to select Must be used with "Cone Storage Rack" option $0.00



SHELLBACK BOOM ELBOW $1,343.00

SEGMENTED BOOM ELBOW $1,333.00

SEGMENTED WEAR BACK BOOM

ELBOW $1,433.00

Prices Exhibit B


33

Vac-On-The-Go – Catch Basin Cleaning $45,522.00

Hydraulic Foot Controls for Front Hose Reel $7,200.00

Hydraulic Hammer Mount Front Bumper $600.00

SetCom Intercom Headsets $750.00

Misc Accessories





First Aid Kit 690-0500 $105.00


Grease Gun 690-0093 $85.00


Vacuum Tubing








6Â½' x 8" Catch Basin Nozzle with Serrated

End $395.00


End $435.00




Snorkel Nozzle Kit (Includes 1- 3' pipe) 711-

0031 $531.00

5' x 5" Snorkel Pipe Nozzle Extension 800-

0127 $172.00

3' x 8" Clear Demo Tube 711-1255 $619.00

Circular Operator Handle 711-0172 $287.00

8" to Double 4" Y Adapter 800-0476 $409.00





Prices Exhibit B


34

8" Hose End 800-0097 $109.00

8" Power Clamp 680-0016 $123.00







6" Adjustable Air Gap 6" Intake System (1) 6" quick clamp included $480.00


6 1/2' x 6" Catch Basin Nozzle with Serrated

End $231.00



locations in comments section, otherwise

engineering will place in best available

locations.


section $202.00

Vertical Pipe Rack (Holds 3 Pipes) $601.00

Lazy Susan Pipe Rack (Holds 5 Pipes) Consult Factory for Compatibility $2,754.00



Folding Pipe Rack (3), Tank Mtd, Curbside Not Available on 3-Yard Machine $3,116.00

Additional Side Steps (8 are Standard) $117.00


Storage Box Behind Cab 16" x 42" x 96" Std on units with 1300 & 1500 gallons of water

and 5 yard units with 1000 gallons $2,561.00

Aluminum Storage Box (Additional) Behind

Cab 16" x 42" x 96" $5,496.00

Aluminum Storage Box (Upgrade) Behind Cab

in lieu of Standard Steel $2,937.00

(2) Roll out shelves for storage box behind cab $1,712.00

Side Mounted Tool Box 35" x 14" x 24" $852.00

35" x 14" x 24" Aluminum Side Mounted Tool

Box, ea (ilo steel) Consult factory for additional room $536.00

16" x 13" x 72" Aluminum Side Mounted Tool

Box, ea (ilo steel) $1,674.00

2 ) 24" x 18" x 18" Steel Rear Tool Boxes, mtd

each side of extended frame units, 1000 or

1300 gallons only

$1,045.00

Prices Exhibit B


35

2 ) 24" x 18" x 18" Aluminum Rear Tool

Boxes, mtd each side of extended frame units,

1000 or 1300 gallons only

$1,775.00

12" x 18" x 96" Steel Tool Box, mounts under

storage box behind cab $1,186.00

12" x 18" x 96" Aluminum Tool Box, mounts

under storage box behind cab $1,984.00

Dry Decking - side tool boxes (6' & 35") - each $235.00

Dry Decking - behind cab storage box (96") $573.00

16x42x48 Steel Storage Box (Drivers Side

Behind Cab)

Consult factory for adaptability on tandem axle

units $1,246.00

16x42x48 Aluminum Storage Box (Drivers

Side Behind Cab)

consult factory for adaptability on tandem axle

units $3,213.00

24x18x18 Steel Tool Box (Extended Frame

Units w/o rear tanks) $985.00

(2) 24x18x18 Aluminum Tool Box (Extended

Frame Units w/o Rear Tanks) $1,902.00

(2) Front Bumper Tool Boxes 8"x14"x6"

Aluminum 711-50463 Curbside/711-50484 Driver's side $946.00

3/4" Spare Nozzles















1" Spare Nozzles

1" Nozzle rack $128.00

Aluminum Storm Nozzle 1" 60 gpm $494.00



1" Storm Nozzle Pipe Assembly (skid) $110.00

Prices Exhibit B


36

1" 60 gpm Standard Nozzle, spare $415.00




1" 60 gpm Penetrator Chisel - Standard, spare $476.00




1" Nozzle Pipe Assembly (skid), spare $110.00

1" 60 gpm Grenade Nozzle $891.00




1" 60 gpm Rotating Spinning Style $1,049.00



1" Brass Flusher Nozzle $90.00

Spare Nozzles



Leader Hose


1" x 10' Length Leader Hose $289.00

1-1/4" x 10' Length Leader Hose $289.00











1" x 30" Length Leader Hose, Spare $137.00

1-1/4" x 30" Length Leader Hose, Spare $137.00

Swedge Tools


Prices Exhibit B


37


1" Swage End $85.00

3/4" Swage End $81.00

3/4" Spare Nozzles


3/4" Bulldog 400.060A $3,397.00

Root Cutter

Rotating Turbine Chain Scraper 5"-10" with

skids & chain 10.125TR6-10 $4,498.00

Rotating Turbine Chain Scraper with skids and

Chain 10.125TR8-12 set $4,711.00


Manuals

Electronic Vac-Con Manual (Thumb Drive),

spare One electronic manual standard per unit $213.00




Ceramic Coating in Debris Tank, Tandem Axle $6,645.00


White (white is standard unless otherwise

specified. PPG code: 940813)

$0.00






Coca Cola Red (PPG code: 911065) $0.00












Cat Yellow (PPG code: 920339) $0.00

Prices Exhibit B


38








Paint Tool Box/Storage Boxes to match Unit Standard - Black Powder Coating $825.00


Mainframe Deck Coating In lieu of adhesive grip tape $2,956.00





Green, Pink $739.00

Standard Striping Package - White 692-5204-

01 $0.00






Cab "Z" Striping Package, specify Color Avail colors: White, Blue, Black, Red, Orange,

Yellow, Green $1,338.00

Cab "Small Stripes" Striping Package, Specify

Color See available colors $1,338.00



Mack Available – Call for Quote

Freightliner Available – Call for Quote

International Available – Call for Quote

Peterbilt Available – Call for Quote

Kenworth Available – Call for Quote

Western Star Available – Call for Quote

Extended Warranties

John Deere auxiliary engine 3 Years/4000

hours (subject to $250 deductible) extended

warranty

$2,699.00

Prices Exhibit B


39



warranty

$3,434.00



warranty

$4,543.00

Gas Engine Extended Warranty -

5YRS/5000HRS $5,356.00

John Deere Tier 4 5YR/5000HR, Full Coverage

Warranty (March 1, 2017 - December 31,

2019)

$4,261.00

Prices Exhibit B


40

Hot Shot Catalog


Tel: 904-284-4200 Fax: 904-284-3305

Polyethylene Water Tank - 1 year warranty

600' capacity (1" Front mounted hose reel)


Water pump drive: Standard Aux Engine is WSG-1068 6.8 Litre, 10-Cylinder, Gas Engine 222HP @ 3200 rpm

400' High Pressure Jet Rodder Hose (3/4")

Hose rewind guide


30" Leader Hose

600 psi wash down hand gun with 25' of hose and nozzle

1) each Sanitary and Penetrator Nozzles

ICC Lighting


12 month standard Warranty - see certificate for details

5lb Fire Extinguisher

Set of Triangles


Water Systems

50/3000, GIANT 7000, GM 5.7 GAS 140 HP $0.00

50/3000, GIANT 7000, GM 5.7 GAS 140 HP With

Aux Engine Hydraulics (Pump Off Not Available)

With Aux Engine Hydraulics (Pump Off

Not Available) $1,397.00

50/3000, GIANT 7000, GM 8.8 GAS 208HP * $19,432.00

50/3000, GIANT 7000, GM 8.8 GAS 208HP * With


50/3000, GIANT 7000, JD 4 CYL TIER 4 DIESEL

140HP $36,587.00


140HP With Aux Engine Hydraulics (Pump Off Not

Available)




225 HP $62,783.00


225 HP With Aux Engine Hydraulics With Aux Engine Hydraulics $64,180.00

50/3000, GIANT 7000, JD 4CYL TIER 3 DIESEL


Prices Exhibit B


41

80/2500, FMC, JD 4 CYL TIER 4 DIESEL 140 HP $39,623.00

80/2500, FMC, GM 8.8 GAS 208 HP * $21,071.00

80/2500, FMC, GM 8.8 GAS 208 HP * With Aux

Engine Hydraulics With Aux Engine Hydraulics $22,468.00


80/2500, FMC, JD 6 CYL TIER 4 DIESEL 225 HP


80/2500, FMC, JD 4CYL TIER 3 DIESEL 140HP

EXPORT ONLY EXPORT ONLY $10,831.00

60/3000, GIANT 7000, GM 5.7 GAS 140 HP $0.00


140 HP $36,587.00

60/3000, GIANT 7000, GM 8.8 GAS 208 HP * $19,432.00


Aux Engine Hydraulics * With Aux Engine Hydraulics $20,829.00


225 HP $62,783.00




140 HP EXPORT ONLY EXPORT ONLY $7,796.00

65/3000, GIANT 8000, GM 8.8 GAS 208 HP * $25,642.00

65/3000, GIANT 8000, GM 8.8 GAS 208 HP* With



225 HP $68,993.00





80/3000, FMC, GM 8.8 GAS 208 HP * $21,071.00








80/3000, GIANT 8000, GM 8.8 GAS 208 HP * $25,642.00

80/3000, GIANT 8000, GM 8.8 GAS 208 HP * With


Prices Exhibit B


42


225 HP $68,993.00





100/2000, FMC, GM 8.8 GAS 208 HP * Includes

Larger Hose Reel & 500' of 1 1/4 Rodder Hose




Includes Larger Hose Reel & 500' of 1 1/4 Rodder

Hose



120/2000,GIANT 8000 , GM 8.8 GAS 208 HP *

Includes Larger Hose Reel & 500' of 1 1/4" Rodder

Hose



120/2000,GIANT 8000 , JD 6 CYL TIER 4 DIESEL

225 HP Includes Larger Hose Reel & 500' of 1 1/4"

Rodder Hose



80/2000, GIANT 7000, GM 5.7 GAS 140 HP $0.00





80/2000, GIANT 7000, GM 8.8 GAS 208HP * $19,432.00




140HP $36,587.00



Available)




225 HP $62,783.00





60/2000, GIANT 7000, GM 5.7 GAS 140 HP $0.00





60/2000, GIANT 7000, GM 8.8 GAS 208HP * $19,432.00




140HP $36,587.00

Prices Exhibit B


43



Available)




225 HP $62,783.00





Models

HS1000 $101,773.00

HS1600 $106,778.00

HS2000 $112,317.00

HS2500 $123,169.00

HS3000 $143,660.00

Mounting Charge $2,857.00

Water System Drives

Hydrostatic drive- includes FMC pump Hot Shot pricing only $13,776.00

Auxiliary Engine Drive other than Gas - select from

option section below Hot Shot Pricing only $0.00

Hose Reels



Front Mounted, Articulating to Driver Side (Std

Pivot) $14,509.00

Front Mounted, Articulating to Driver Side, 800' (1")

Capacity (Std. Pivot) $18,248.00




Rear Mounted, Articulating Hose Reel, 800' Capacity Pivot to Driver's Side $21,367.00

Front Mounted Swivel Hose Reel, 600' (1") Capacity $10,125.00

Rear Mounted Swivel Hose Reel, 600' (1") Capacity $10,125.00

Hose Reel Options





Digital electronic footage counter Standard on Omnibus Precision

Power(TM) $4,144.00

Prices Exhibit B


44

Hose Footage Counter (Standard - Driver Side) Hot Shot Pricing only $563.00

Hose Footage Counter (Curb Side) Hot Shot Pricing only $563.00


Water Systems

30 gpm/3000 psi Pump - Single Engine, Hydrostatic

Drive, FMC only. Must choose FMC water pump

from Options List.

$0.00


Drive, FMC only. FMC water pump included in

price.

$0.00



price.

$0.00



price.

$0.00



price.

$0.00



price.

$0.00



Engine PTO


Pumps $1,108.00


circuit.




circuit.

Requires winter recirculation system for










2Â½" Water Drain Gate Valve Assembly (cannot

choose both 2-1/2" gate valve and 1/4 turn ball valve,

only choose one)



Prices Exhibit B


45


2-1/2" gate valve and 1/4 turn ball valve, only choose

one)




Folding Spray Bar Assembly with In Cab Controls $4,047.00


required $464.00














Anti-Freeze System




$2,187.00

Provision for Dealer/Customer installed Vaporooter

Commander Specify Desired Location $0.00




Lance w single Fwd Spray Nozzle, Storage Tubes for

Lances Heavy Duty Unloader Valve Main Control

Ball Valve Variable Flow Valve

$6,895.00



Hand Gun Assembly with 25' of Â½" hose, Low

Pressure $689.00






Prices Exhibit B


46


Spray $622.00










8"."

$20,571.00

Jet Rodder Hose



600' x 3/4" Jet Rodder Hose 3000 psi/7500 psi $1,021.00






600' x 1" Jet Rodder Hose 2500 psi/6250 psi $1,021.00

700' x 1" Jet Rodder Hose Requires large hose reel - 2500 psi/6250 psi $1,530.00

800' x 1" Jet Rodder Hose Requires large hose reel - 2500 psi/6250 psi $2,040.00

400' x 1" 3000 psi - Jet Rodder Hose 3000 psi/7500 psi $675.00

500' x 1" 3000 psi - Jet Rodder Hose 3000 psi/7500 psi $1,199.00

600' x 1" 3000 psi - Jet Rodder Hose 3000 psi/7500 psi $2,326.00





500' x 1 1/4" Jet Rodder Hose Standard on 120 gpm systems - 2500

psi/6250 psi $0.00


800' x 1" 3000 psi - Jet Rodder Hose - Continuous 3000 psi/7500 psi $5,553.00





Debris Body Options


Prices Exhibit B


47

Electrical Options





Auxiliary Engine Kill Switch (Vandalism Protection) $144.00














Lighting Options









$994.00









Cord $1,132.00



LED Rear Mounted Flood Lights with Limb Guard -

Whelen NP6BB Worklight $789.00



Prices Exhibit B


48

Midbody LED Strobes - Frame Mounted - Whelen

50A03ZCR - Amber

When picked with bumper strobes - (6)

strobes total $1,041.00







Hydraulic Power Tool Option, Rear Bumper Control

Valve Mount Location $4,153.00








Metric Hose Counter (Driver Side) Hot Shot Pricing only $563.00



French Decals $0.00







Long Handle Storage Placement - Rear of Mainframe

Must be picked with "Long Handle

Storage/ PVC (2)" above -

UNAVAILABLE ON 1500 GALLON

UNITS

$0.00

Cone Storage Rack - MUST SELECT PLACEMENT

BELOW $447.00


Option $0.00


Driver's Side


option $0.00


Curbside


option $0.00


Con to select


option $0.00

Prices Exhibit B


49




Hydraulic Hammer Mount Front Bumper $600.00


Misc Accessories




First Aid Kit 690-0500 $105.00


Grease Gun 690-0093 $85.00


Nozzle rack $128.00



Storage Box [Hydrostatic Drive Units Only] $2,561.00


ea (ilo steel) $1,674.00

2 ) 24" x 18" x 18" Steel Rear Tool Boxes, mtd each

side of extended frame units, 1000 or 1300 gallons

only

$1,045.00

2 ) 24" x 18" x 18" Aluminum Rear Tool Boxes, mtd

each side of extended frame units, 1000 or 1300

gallons only

$1,775.00

12" x 18" x 96" Steel Tool Box, mounts under


12" x 18" x 96" Aluminum Tool Box, mounts under


2) Tool boxes, 16" x 13" x 72", steel $1,922.00

16x42x48 Steel Storage Box (Drivers Side Behind

Cab)

Consult factory for adaptability on tandem


16x42x48 Aluminum Storage Box (Drivers Side

Behind Cab)

consult factory for adaptability on tandem


3/4" Spare Nozzles






Prices Exhibit B


50










1" Spare Nozzles























Spare Nozzles



Leader Hose



Prices Exhibit B


51














Swedge Tools



1" Swage End $85.00

3/4" Swage End $81.00

3/4" Spare Nozzles


3/4" Bulldog 400.060A $3,397.00

Root Cutter


chain 10.125TR6-10 $4,498.00

Rotating Turbine Chain Scraper with skids and Chain

10.125TR8-12 set $4,711.00


Manuals






PPG code: 940813)

$0.00





Prices Exhibit B


52

Paint Module: Single-Stage Polyeurethene Elite Coca

Cola Red (PPG code: 911065) $0.00


























Cab "Z" Striping Package, specify Color Avail colors: White, Blue, Black, Red,

Orange, Yellow, Green $1,338.00

Cab "Small Stripes" Striping Package, Specify Color See available colors $1,338.00


Extended Warranties

John Deere auxiliary engine 3 Years/4000 hours

(subject to $250 deductible) extended warranty $2,699.00








Prices Exhibit B


53






Prices Exhibit B


54

Single Engine Combination


Tel: 904-284-4200 Fax: 904-284-3305


Vacuum Drive: Hydrostatic - Required

3/16" Corten Steel Debris Tank - (size as specified by model number)

Full opening rear door

Hydraulic rear door locks, with door grabber with safety latch



Polyethylene water tank

Automatic Vacuum Breaker and overfill protection



4 Way hydraulic boom with 270 deg. Rotation and joystick controls

Front mounted 600' capacity (1" hose)/hydraulic hose reel

FMC Water Pump is Standard on Single Engine Unit: 60 gpm/2000 psi system

Water pump drive: Hydrostatic

400' high pressure jet rodder hose (1" or 3/4")

Manual hose rewind guide


30" leader hose

20 gpm at 600 psi wash down hand gun with 25' of hose and nozzle

Sealed and locking tool box(es) {as indicated by model number}



ICC lighting



-

Note: Includes Hydrostatic Drive Option


Set of Triangles


Debris Body Options

Prices Exhibit B


55

Dump High Option This option allows the operator higher debris body

dumping $2,679.00

Electrical Options





Folding Spray Bar Assembly with In Cab

Controls Only with FEPTO Driven Water Pump $4,047.00

Water Systems

30/3000 FMC STANDARD OFFERING STANDARD OFFERING $0.00

60/2000, FMC STANDARD OFFERING STANDARD OFFERING $0.00

60/2000, GIANT LIMITED

AVAILABILITY, WILL AFFECT

DELIVERY

LIMITED AVAILABILITY, WILL AFFECT

DELIVERY $4,139.00




DELIVERY


DELIVERY $4,139.00




DELIVERY


DELIVERY $4,139.00





DELIVERY


DELIVERY $4,139.00




DELIVERY


DELIVERY $4,139.00


100/2000, FMC Includes Larger Hose Reel &

500' of 1 1/4" Rodder Hose *Consult Factory

for Adaptability


Rodder Hose *Consult Factory for Adaptability $12,179.00

Models

PD3550HN/850 (624 at 18")




$238,323.00

Prices Exhibit B


56

850 Gal H2O, Single Engine, 4X2 and Rolling

Bogies

PD3550HN/1000 (624 at 18")




1000 Gal H2O, Singel Engine, 4X2 and Rolling

Bogies

$233,006.00

PD3590HN/850 (624 at 18")



Drive and Cyclone Separator, 9 Cy Debris Tank,

850 Gal H2O, Single Engine, 4X2

$232,384.00

PD3590HN/1000 (624 at 18")





$234,340.00

PD3511HEN/850 (624 at 18")




850 Gal H2O, Single Engine, 6X4, Extended

Frame

$244,179.00

PD3511HEN/1000 (624 at 18")




1000 Gal H2O, Single Engine, 6x4, Extended

Frame

$251,648.00

PD3511HEN/1300 (624 at 18")





Frame

$251,648.00

PD3511HEN/1500 (624 at 18")




1500 Gal H2O, Extended Frame, Single Engine,


$257,642.00

PD3512HEN/850 (624 at 18")





Frame

$249,691.00

PD3512HEN/1000 (624 at 18")




$251,648.00

Prices Exhibit B


57


Frame

PD3512HEN/1300 (624 at 18")





Frame

$257,531.00

PD3512HEN/1500 (624 at 18")






$263,525.00

PD3516HEN/1300 (624 at 18")



Drive and Cyclone Separator, 16 CY Debris Tank

with Flat Style Rear Door, 1300 Gal H2O, Single

Engine, 6X4. Consult Factory on Rear Axle


$271,614.00

PD3516HEN/1500 (624 at 18")



Drive and Cyclone Separator, 16 Cy Debris Tank

with Flat Style Rear Door, 1500 Gal H2O,

Extended Frame, Single Engine, 6X4. Consult

Factory on Rear Axle Requirements. Cannot be

used with High Dump.

$288,982.00

PD3650HN/850 (824 at 18")


to 5197 CFM (4000 CFM at 18" HG), Hydrostatic



Bogies

$244,809.00

PD3650HN/1000 (824 at 18")





Bogies

$246,765.00

PD3690HN/850 (824 at 18")





$238,871.00

PD3690HN/1000 (824 at 18")





$250,716.00

Prices Exhibit B


58

PD3611HEN/850 (824 at 18")





Frame

$250,716.00

PD3611HEN/1000 (824 at 18")





Frame

$252,377.00

PD3611HEN/1300 (824 at 18")





Frame

$258,138.00

PD3611HEN/1500 (824 at 18")






$264,243.00

PD3612HEN/850 (824 at 18")





Frame

$256,179.00

PD3612HEN/1000 (824 at 18")


to 5197 CFM (4000 CFM at 18"HG), Hydrostatic



Frame

$258,138.00

PD3612HEN/1300 (824 at 18")





Frame

$264,017.00

PD3612HEN/1500 (824 at 18")






$278,102.00

PD3616HEN/1300 (824 at 18")





$278,102.00

Prices Exhibit B


59



PD3616HEN/1500 (824 at 18")








$284,009.00

PD4250HN/850 (827 at 18")





Bogies

$248,516.00

PD4250HN/1000 (827 at 18")





Bogies

$250,471.00

PD4290HN/850 (827 at 18")





$242,577.00

PD4290HN/1000 (827 at 18")





$244,536.00

PD4211HEN/850 (827 at 18")





Frame

$254,425.00

PD4211HEN/1000 (827 at 18")





Frame

$256,235.00

PD4211HEN/1300 (827 at 18")





Frame

$261,844.00

PD4211HEN/1500 (827 at 18") Includes: Roots 827 RCS PD Blower Free Air up

to 6000 CFM (4500 CFM at 18" HG), Hydrostatic $267,836.00

Prices Exhibit B


60




PD4212HEN/850 (827 at 18")





Frame

$259,887.00

PD4212HEN/1000 (827 at 18")





Frame

$261,844.00

PD4212HEN/1300 (827 at 18")


to 6000 CFM ( 4500 CFM at 18" HG),


Debris Tank, 1300 Gal H2O, Single Engine, 6X4,

Extended Frame

$267,726.00

PD4212HEN/1500 (827 at 18")


to 6000 CFM ( 4500 CFM at 18" HG),



Single Engine, 6X4. Cannot be used with High

Dump.

$273,720.00

PD4216HEN/1300 (827 at 18")







$281,809.00

PD4216HEN/1500 (827 at 18")








$287,717.00

V250HN/850


Drive, 5 CY Debris Tank, 850 Gal H2O, Single

Engine, 4X2 and Rolling Bogies

$207,554.00

V350HN/850




$218,865.00

Prices Exhibit B


61

V250HN/1000




$209,071.00

V350HN/1000




$219,791.00

V290HN/850



Engine, 4X2

$202,567.00

V390HN/850



Engine, 4X2

$213,853.00

V290HN/1000



Engine, 4X2

$204,585.00

V390HN/1000



Engine, 4X2

$215,807.00

V211HEN/850



Engine, 6X4, Extended Frame

$214,180.00

V311HEN/850




$225,696.00

V211HEN/1000




$216,133.00

V311HEN/1000




$227,355.00

V211HEN/1300




$221,970.00

V311HEN/1300




$233,115.00

V211HEN/1500


Drive, 11 CY Debris Tank, 1500 Gal H2O,

Extended Frame, Single Engine, 6X4. Cannot be


$227,965.00

V311HEN/1500 Includes: 3 Stage Vac-Con Blower, Hydrostatic

Drive, 11 CY Debris Tank, 1500 Gal H2O, $239,107.00

Prices Exhibit B


62



V212HEN/850




$219,938.00

V312HEN/850




$231,157.00

V212HEN/1000




$221,895.00

V312HEN/1000




$233,115.00

V212HEN/1300




$227,856.00

V312HEN/1300




$238,997.00

V212HEN/1500





$233,851.00

V312HEN/1500





$244,992.00

V216HEN/1300


Drive, 16 CY Debris Tank with Flat Style Rear

Door, 1300 Gal H2O, Single Engine, 6X4.


Extended Frame

$241,892.00

V316HEN/1300



Door, 1300 Gal H2O, Single Engine, 6X4.


Extended Frame

$253,082.00

V216HEN/1500



Door, 1500 Gal H2O, Extended Frame, Single


Requirements. Cannot be used with High Dump.

$248,902.00

Prices Exhibit B


63

V316HEN/1500



Door, 1500 Gal H2O, Extended Frame, Single


Requirements. Cannot be used with High Dump.

$260,090.00

Booms

Fixed Boom - Standard $0.00



10' Aluminum Telescoping Boom with





Adapter & 8" hose $16,871.00




Adapter & 8" hose $21,767.00

8' Aluminum Telescoping Rear Boom with


Blower Drives


Hose Reels



Front Mounted, Articulating to Driver Side

(Std Pivot) $14,509.00

Front Mounted, Articulating to Driver Side,

800' (1") Capacity (Std. Pivot) $18,248.00



Front Mounted, Articulating to Passenger

Side, 800' (1") Capacity (Reverse Pivot) $18,296.00


Rear Mounted, Articulating Hose Reel, 800'

Capacity Pivot to Driver's Side $21,367.00

Front Mounted Swivel Hose Reel, 600' (1")

Capacity $10,125.00

Rear Mounted Swivel Hose Reel, 600' (1")

Capacity $10,125.00

Hose Reel Options




Prices Exhibit B


64


Hose Footage Counter (Standard - Driver

Side) $621.00





Water Systems

30 gpm/3000 psi FMC Pump - Single Engine,

Hydrostatic Drive $0.00

60 gpm/2000 psi FMC Pump - Single Engine -













Centrifugal Compressor Fan Flush Out

System $1,291.00


Winter Recirculating connection for low

pressure circuit.

Requires winter recirculating system for rodder

hose. $279.00

Winter Recirculating connection for high

pressure circuit.

Requires winter recirculation system for rodder

hose. $479.00

Artic Winter Recirculating System for rodder

hose, includes plumbing to upper water tanks. $1,393.00







Prices Exhibit B


65

2Â½" Water Drain Gate Valve Assembly

(cannot choose both 2-1/2" gate valve and 1/4

turn ball valve, only choose one)



1/4 turn ball valve water drain ( cannot choose

both 2-1/2" gate valve and 1/4 turn ball valve,

only choose one)





required $464.00





Lateral Cleaning Kit w/150' x Â½" Hose

w/Nozzle, Dolly style mounts $3,416.00

Lateral Cleaning Kit w/200' x 1/2" Hose

w/Nozzle, Permanently Mtd, Electronically

Controlled

$6,306.00



Street Flusher, 450 GPM, air actuated spray

heads, includes water and debris tanks tied

together

Consult factory for adaptability for Single Engine

Design $35,800.00


Chemical Tank (15) Gallons 120volt Pump with Invertor (Consult Factory for

Compatibility) 711-8088 $3,377.00



Anti-Freeze System



only.

$2,187.00

Winter Recirculation System - FOR USE

WITH TRANSFER CASE DRIVEN WATER

PUMPS ONLY

$2,897.00

Provision for Dealer/Customer installed

Vaporooter Commander Specify Desired Location $0.00


Water Pump Flow Meter - Omnibus Units

Only $2,306.00

Winter Recirculating System for Rodder Hose

- ONLY for FEPTO-driven water pumps ONLY for use with FEPTO-driven water pumps $1,108.00

Prices Exhibit B


66

Hydroexcavation Pkg Inc- 50â€™ Handgun

Hose Reel w/ Â½â€� hose 72â€� X Â½â€�

Sch. 80 QD Lance w single Fwd Spray

Nozzle, Storage Tubes for Lances Heavy Duty

Unloader Valve Main Control Ball Valve

Variable Flow Valve

$6,895.00




Hand Gun Assembly with 25' of Â½" hose,

Low Pressure $689.00







Hand Gun Assembly (2) Handle with

Adjustable Spray $622.00




Side) $198.00



disconnects, 1/2 schedule 80, horizontal

handle


Available $0.00

711-30906 A 48" Extension for 711-53686









711-30903A Multiple Forward Jets with

Chisel Nozzle No extensions available $1,165.00


WiFi connected C70 nozzle with heavy duty

camera with LED lights, protective case,Tablet

w/GPS, Pipeline Viewing Software, Jet Inserts and

Battery Charger. (2) Skids to accommodate Pipe

1-6" and 1-8"."

$20,571.00

Prices Exhibit B


67

Water Recycling System, Includes recycling

nozzle (Consult Factory)

Filtration: The system shall consist of 2 stage

water filtration. The removable first stage filter

will be made of perforated stainless steel to

remove large particulate. It will be removeable for

second stage filter maintenance. The second stage

filter shall be made of stainless steel. The second

stage filter will continuously rotate hydraulically

during operation for self-cleaning. A high pressure

(2000 PSI) back flush assembly and wear resistant

wiper will be used to assist in cleaning from the

inside out. The deck mounted water pump shall be

an HPT 70R single piston pump specifically

designed for water recycling. The pump shall be

fitted with an accumulator for smooth continuous

flow. The hydraulic drive system will employ a

WT40 hydraulic oil reservoir. The optimized

hydraulic oil reservoir / heat exchanger unit is

used for both primary and secondary hydraulic

systems. The Vac-Con recycler system will be

able to use either fresh water, recycled water or

both. When recycling, the water is used from the

debris tank directly and does not enter the fresh

water system. Fresh water operation does not use

any reclaimed water from the debris tank and has

a maximum capacity of 1000 US gallons. This

system enables separate fresh water compartments

to be mounted on the unit for easy daily cleaning

without contaminated water. No settling tanks or

recycled water tanks are necessary. A rotating

nozzle that is designed for operation with

recycling water and fresh water will be supplied.

$129,375.00

Jet Rodder Hose













Prices Exhibit B


68











psi/6250 psi $0.00



800' x 1" 3000 psi - Jet Rodder Hose -

Continuous 3000 psi/7500 psi $5,553.00





Debris Body Options


grabber

Removes door grabber; Stand. on Highdump; Not

Available w/ Flatdoor $4,051.00



6" Knife Valve with Center Post and Handle,

in Lieu of the 5" Butterfly Valve (662-0125) Standard drain hose included $788.00




Mounted w/Cam-lock and 25' of layflat hose

with Cam-lock

$2,956.00


handles $827.00









Prices Exhibit B


69






$2,019.00









mounted $2,834.00


Water Tank Side Panels, Diamond Plate

Aluminum $1,828.00





Wear Plate to cover entire rear door, with

hinge $1,075.00


Mounted $503.00


Ball $232.00


Debris Tank


option $828.00


Tank


option $828.00





BELOW $479.00


drain valve


assembly" $0.00

Debris tank drain screen placement - Rear

door pump off


assembly" $0.00

Prices Exhibit B


70


debris tank drain


assembly" $0.00




assembly" $0.00

Electrical Options






Breaker, Throttle & Debris Body (includes

Hi-Dump, if applicable). Does not include

remote cable pendant controls for boom or hi

dump.





Cable $548.00

Hi Dump pendant control station with 25'

cable $445.00








Curbside Camera Placement - Mirror








Omnibus Precision Power System (OPP)-

Electronic Controller System-Includes: a color

monitor, electronic footage counter, and

pressure compensated hydraulics.

AVAILABLE: DUAL AND SINGLE ENG

MACHINES.

Compatible chassis: Freightliners with Cummins

ISL and Detroit Diesel DD13, International with

N-10, and Peterbilt with ISL and PX

$5,887.00

Prices Exhibit B


71

Lighting Options







Tank Mounted - Whelen L21HAP LED


$994.00




Mounted - Whelen TA1251NF1 Traffic

Arrow

$3,997.00


Advisor $3,019.00












LED Flood Light - Level Wind Guide with

Limb Guard - Whelen NP6BB Worklight $446.00

Midbody LED Strobes - Frame Mounted -

Whelen 50A03ZCR - Amber

When picked with bumper strobes - (6) strobes

total $1,041.00







Cyclone Separator, add on for fan units,

consult factory for adaptability

Contact factory for adaptability. Standard on PD

units. $5,251.00

Hydraulic Power Tool Option, front bumper

control valve mount location $3,629.00

Hydraulic Power Tool Option, Rear Bumper

Control Valve Mount Location $4,153.00


Prices Exhibit B


72



Remote Boom Grease Zerk Assembly

(Ground Level - includes water pump drive) -

If Applicable

$2,562.00





Axle) $2,024.00


Axle) $2,421.00

Automatic Lube System - in addition to

manual remote grease options (Vac-Con

Module)

$5,678.00



Hydraulic System Temperature Gauge $348.00

Vacuum gauge front bumper location behind

reel $603.00


standard) $1,837.00



4, 304 Stainless Steel Construction, 14in x

40in with 8in discharge

$5,148.00


French Decals $0.00




psi rating. (Delete driver side front water

tank).

$31,551.00








Mainframe



GALLON UNITS

$0.00

Prices Exhibit B


73



Cone Storage Rack Placement - Rear of

Frame Must be used with "Cone Storage Rack" Option $0.00






- Vac-Con to select Must be used with "Cone Storage Rack" option $0.00






ELBOW $1,433.00


Hydraulic Hammer Mount for Front Bumper $600.00

Setcom Intercom Headset $750.00

Misc Accessories





First Aid Kit 690-0500 $105.00


Grease Gun 690-0093 $85.00


Vacuum Tubing









End $395.00


End $435.00

Prices Exhibit B


74




Snorkel Nozzle Kit (Includes 1- 3' pipe) 711-

0031 $531.00

5' x 5" Snorkel Pipe Nozzle Extension 800-

0127 $172.00

3' x 8" Clear Demo Tube 711-1255 $619.00







8" Hose End 800-0097 $109.00

8" Power Clamp 680-0016 $123.00







6" Adjustable Air Gap 6" Intake System (1) 6" quick clamp included $480.00



End $231.00


Additional Pipe Rack(s), specify any

requested locations in comments section,

otherwise engineering will place in best

available locations.


section $202.00

Vertical Pipe Rack (Holds 3 Pipes) $601.00

Lazy Susan Pipe Rack (Holds 5 Pipes) Consult Factory for Compatibility $2,754.00






Storage Box Behind Cab 16" x 42" x 96" Std on units with 1300 & 1500 gallons of water

and 5 yard units with 1000 gallons $2,561.00

Prices Exhibit B


75

Aluminum Storage Box (Additional) Behind

Cab 16" x 42" x 96" $5,496.00

Aluminum Storage Box (Upgrade) Behind

Cab in lieu of Standard Steel $2,937.00

(2) Roll out shelves for storage box behind

cab $1,712.00


35" x 14" x 24" Aluminum Side Mounted

Tool Box, ea (ilo steel) Consult factory for additional room $536.00

Dry Decking - side tool boxes (6' & 35") -

each $235.00

Dry Decking - behind cab storage box (96") $573.00


Behind Cab)


units $1,246.00


Side Behind Cab)


units $3,213.00







3/4" Spare Nozzles




3/4" 30 gpm Penetrator Chisel - Standard,

spare $476.00

3/4" 50 gpm Penetrator Chisel - Standard,

spare $476.00










1" Spare Nozzles

Prices Exhibit B


76























Spare Nozzles



Leader Hose













Prices Exhibit B


77




Swedge Tools



1" Swage End $85.00

3/4" Swage End $81.00

3/4" Spare Nozzles


3/4" Bulldog 400.060A $3,397.00

Root Cutter

Rotating Turbine Chain Scraper 5"-10" with

skids & chain 10.125TR6-10 $4,498.00

Rotating Turbine Chain Scraper with skids

and Chain 10.125TR8-12 set $4,711.00


Manuals






Ceramic Coating in Debris Tank, Tandem

Axle $6,645.00

Paint Module: Single-Stage Polyeurethene

Elite White (white is standard unless

otherwise specified. PPG code: 940813)

$0.00


Elite School Bus Yellow (PPG code: 916352) $0.00


Elite Safety Yellow (PPG code: 920225) $0.00


Elite Coca Cola Red (PPG code: 911065) $0.00


Elite Candy Apple Red (PPG code: 918623) $0.00


Elite Medium Blue (PPG code: 918345) $0.00


Elite Deep Blue (PPG code: 918377) $0.00

Prices Exhibit B


78


Elite Pepsi Blue (PPG code: 946949) $0.00


Elite Omaha Orange (PPG code: 917204) $0.00


Elite Cat Yellow (PPG code: 920339) $0.00


Elite Lime Green (PPG code: 905804) $0.00


Elite Green (PPG code: 918367) $0.00


Elite Woodland Green (PPG code: 918359) $0.00


Paint Tool Box/Storage Boxes to match Unit Standard - Black Powder Coating $825.00






Reflective Striping, Other than standard colors Avail colors: Black, Red, Orange, Yellow, Green,

Pink $739.00


01 $0.00

Standard Striping Package - Blue 692-5204-

02 $0.00











Mack Available – Call for

Quote

Freightliner Available – Call for

Quote

International Available – Call for

Quote

Prices Exhibit B


79

Peterbilt Available – Call for

Quote

Kenworth Available – Call for

Quote

Western Star Available – Call for

Quote

Prices Exhibit B


80

Vector Technologies Ltd8301 West Parkland CourtMilwaukee, WI 53223

QTY U/M PART # UNIT PRICE EXT PRICE1 EA VJ 375 VecJet™ VJ375 Sewer Jetter Skid 66,700.00$ 66,700.00$

74 HP Tier 4 Kubota diesel engine16 Gal. Fuel tankSkid Mounted Hook Lift Frame for 13' railsStrobe light,

Water Pump and Water Tank375 Gallon HDPE Water tank30 GPM @ 3000 PSI Giant water pumpElectrically operated clutchCold weather re-circulation & Air purge systemFill pipe, hose rack and 25' fire hydrant hoseWater tank fill level sight gaugeHeavy duty pressure unloader

Hose ReelRotating hose reel & 500' x 3/4" sewer hoseLeader hose 10' x 3/4" Hydraulic feed & retract w/manual swivelFree Reel SpinAdjustable water flow rate valveElectronic weather proof control panelHeavy duty sewer hose guideAux 12 volt plug-in & E - Stop

Other FeaturesFinned nozzle extension, Tiger tailTool box Steel (1) cleaning nozzle & (1) penetrator nozzle

Options 1 EA LED Work lights (2) 525.00$ 525.00$ 1 EA 50' of 3/8" aux hose, reel & gun 735.00$ 735.00$ 1 EA Footage counter - reel mounted 815.00$ 815.00$ 1 EA Wireless Remote 4,105.00$ 4,105.00$

72,880.00$ Dimensions and Weight:

TBDChassis not includedDesigned for 13' rails.

Warranty:1 year on machine excluding wear items2 year engine 1 Year Water Pump5 year Tank Warranty

DESCRIPTION

Total List Price

Prices Exhibit B


81

QTY U/M PART # UNIT PRICE EXT PRICE

1 EA VJ 750 VecJet™ VJ750 Sewer Jetter Skid 72,200.00$ 72,200.00$

74 HP Tier 4 Kubota diesel engine

16 Gal. Fuel tank

Skid Mounted

Hook Lift Frame for 18' frame

Strobe light,

Water Pump and Water Tank

750 Gallon Total HDPE tanks (2 - 375 gal. tanks)

30 GPM @ 3000 PSI Giant water pump

Electrically operated clutch

Cold weather re-circulation & Air purge system

Fill pipe, hose rack and 25' fire hydrant hose

Water tank fill level sight gauge

Heavy duty pressure unloader

Hose Reel

Rotating hose reel & 500' x 3/4" sewer hose

Leader hose 10' x 3/4"

Hydraulic feed & retract w/manual swivel

Free Reel Spin

Adjustable water flow rate valve

Electronic weather proof control panel

Heavy duty sewer hose guide

Aux 12 volt plug-in & E - Stop

Other Features

Finned nozzle extension, Tiger tail

Tool box Steel - 4'

(1) cleaning nozzle & (1) penetrator nozzle

Options To Consider (not included in above unit price)

1 EA LED Work lights (2) 525.00$ 525.00$

1 EA 50' of 3/8" aux hose, reel & gun 735.00$ 735.00$

1 EA Footage Counter - reel mounted 815.00$ 815.00$

1 EA Wireless Remote 4,105.00$ 4,105.00$

78,380.00$

Dimensions and Weight:

TBD

Chassis not included

Designed for 18' frame

Warranty:

1 year on machine excluding wear items

2 year engine

1 Year Water Pump

5 year Tank Warranty

DESCRIPTION

Total List Price

Prices Exhibit B


82

Titan


Tel: 904-284-4200 Fax: 904-284-3305

3-stage Aeroboost Â® Centrifugal compresor - high efficiency airflow design w/dual cyclone filtration

Hinge type / Body Prop Permanently mount debris body prop (hinge-type)

Lazy Susan pipe rack (5-pipe)


Vacuum Drive: hydrostatic drive "high volume"

1/4" Corten steel debris tank

Hydraulic rear door locks

6" knife valve with 10' lay flat hose

Debris tank dumping: minimum 50 degree, hydraulic cylinder lift- power up/power down

Cross-linked polyethylene water tanks

Automatic vacuum breaker and overfill protection


6 Way hydraulic boom with 230 degree rotation and joystick control

Front mounted 600' capacity articulating hose reel

60gpm/2000psi water pump system

Water pump drive: Standard Aux Engine GM gasoline powered

400' high pressure jet rodder hose

Heavy-duty dual roller level wind guide (aluminum)

Flexible hose guide (Tiger Tail)

30" leader hose

20gpm/800psi wash-down system w/hand-gun and 25' of hose

Sealed and locking Steel tool box (es) {as indicated by model number}

1 each sanitary and penetrator nozzles

25' aluminum suction pipe(1-3', 2-5', 1-6' and 1-6.5' catch basin nozzle) w/quick clamps

ICC lighting LED

Zinc, PPG Paint - line on process. "Aircraft-grade" primer

12 month standard warranty for module


Set Triangles

5 year centrifugal compressor (fans) warranty

2 year water pump warranty

5 year water pump drive warranty

Prices Exhibit B


83

5 year debris tank warranty

10 year water tank warrranty

Remote Transfer Case Engagement


Blower Drives

AQD Fan Drive for Titan

3-stage AeroboostÂ® Centrifugal

compressor - high efficiency airflow design

w/dual cyclone filtration

$0.00

Electrical Options


Models

TPD3611HE/1000 (824 at 18")

Includes: Roots 824 RCS PD Blower Free

Air up to 5197 CFM (4000CFM at 18"

HG), Hydrostatic Drive and Cyclone

Separator, 11 CY Debris Tank, 1000 Gal

H2O, 6X4, Extended Frame

$291,976.00

TPD3611HE/1300 (824 at 18")






$297,972.00

TPD3611HE/1500 (824 at 18")






$303,771.00

TPD3612HE/1000 (824 at 18")






$297,883.00

TPD3612HE/1300 (824 at 18")






$303,527.00

TPD3612HE/1500 (824 at 18")






$309,521.00

TPD4211HE/1000 (827 at 18") Includes: Roots 827 RCS PD Blower Free

Air up to 6000 CFM (4500CFM at 18" $293,176.00

Prices Exhibit B


84




TPD4211HE/1300 (827 at 18")






$299,172.00

TPD4211HE/1500 (827 at 18")






$304,971.00

TPD4212HE/1000 (827 at 18")






$299,083.00

TPD4212HE/1300 (827 at 18")






$304,727.00

TPD4212HE/1500 (827 at 18")






$310,721.00

TAQD311E/1300


Debris Tank, 1300 Gal H2O, 6X4,

Extended Frame

$278,335.00

TAQD311E/1500



Extended Frame

$278,335.00

TAQD312E/1000



Extended Frame

$272,477.00

TAQD312E/1300



Extended Frame

$278,072.00

TAQD312E/1500



Extended Frame

$284,086.00

Prices Exhibit B


85

TAQD311E/1000



Extended Frame

$266,537.00



hand-gun


rodder hose for excavation $279.00


hand-gun


rodder hose for excavation $479.00

Upgrade ball valves 1Â¼" plumbing + heavy duty

ball valves $599.00

Water Systems

50/3000, GIANT 7000, GM 5.7 GAS 140 HP $0.00





50/3000, GIANT 7000, GM 8.8 GAS 208HP * $19,432.00




140HP $36,587.00



Available)




225 HP $62,783.00






80/2500, FMC, GM 8.8 GAS 208 HP * $21,071.00






80/2500, FMC, JD 4CYL TIER 3 DIESEL 140HP


60/3000, GIANT 7000, GM 5.7 GAS 140 HP $0.00


140 HP $36,587.00

60/3000, GIANT 7000, GM 8.8 GAS 208 HP * $19,432.00

Prices Exhibit B


86


Aux Engine Hydraulics * With Aux Engine Hydraulics $20,829.00


225 HP $62,783.00





65/3000, GIANT 8000, GM 8.8 GAS 208 HP * $25,642.00

65/3000, GIANT 8000, GM 8.8 GAS 208 HP* With



225 HP $68,993.00





80/3000, FMC, GM 8.8 GAS 208 HP * $21,071.00








80/3000, GIANT 8000, GM 8.8 GAS 208 HP * $25,642.00

80/3000, GIANT 8000, GM 8.8 GAS 208 HP * With



225 HP $68,993.00





100/2000, FMC, GM 8.8 GAS 208 HP * Includes

Larger Hose Reel & 500' of 1 1/4 Rodder Hose




Includes Larger Hose Reel & 500' of 1 1/4 Rodder

Hose



120/2000,GIANT 8000 , GM 8.8 GAS 208 HP *

Includes Larger Hose Reel & 500' of 1 1/4" Rodder

Hose



Prices Exhibit B


87

120/2000,GIANT 8000 , JD 6 CYL TIER 4 DIESEL

225 HP Includes Larger Hose Reel & 500' of 1 1/4"

Rodder Hose



80/2000, GIANT 7000, GM 5.7 GAS 140 HP $0.00

80/2000, GIANT 7000, GM 8.8 GAS 208HP * $19,432.00




140HP $36,587.00



Available)




225 HP $62,783.00





60/2000, GIANT 7000, GM 5.7 GAS 140 HP $0.00





60/2000, GIANT 7000, GM 8.8 GAS 208HP * $19,432.00




140HP $36,587.00



Available)




225 HP $62,783.00





Swivel upgrade 1-Â¼" rotary union $377.00

Booms





Prices Exhibit B


88

6' Aluminum Telescoping Boom with 10" Inlet and

Pendant Control Station

10" Boom Inlet, Boom and Elbow with 10"

to 8" Adapter & 8" hose $16,871.00

10' Aluminum Telescoping Boom with 10" Inlet and

Pendant Control Station

10" Boom Inlet, Boom and Elbow with 10"

to 8" Adapter & 8" hose $21,767.00

Hose Reels

Front Mounted, Articulating to Driverâ€™s Side,

600â€™ (1â€•) Capacity (Std Pivot) $0.00

Front Mounted, Articulating to Driver Side, 800' (1")

Capacity (Std. Pivot) $3,769.00


(Reverse Pivot) $0.00

Front Mounted, Articulating to Passenger Side, 800'

(1") Capacity (Reverse Pivot) $3,769.00

Hose Reel Options







Engine PTO


Pumps $1,108.00










2-1/2" gate valve and 1/4 turn ball valve, only choose

one)




Folding Spray Bar Assembly with In Cab Controls $4,047.00


required $464.00





Prices Exhibit B


89










Anti-Freeze System




$2,187.00




Lance w single Fwd Spray Nozzle, Storage Tubes for

Lances Heavy Duty Unloader Valve Main Control

Ball Valve Variable Flow Valve

$6,895.00










Spray $622.00




711-30906 A 48" Extension for 711-53686 high-

pressure handwand


Assy. $184.00

711-TBA 72" Extension for 711-53686 high-pressure

handwand


Assy. $196.00

711-30903 High-pressure handwand 51"x1/2" S.S.,

pistol grip handle with adjustable handle (No

extensions available) - Single foward jet





Prices Exhibit B


90







8"."

$20,571.00

Jet Rodder Hose




















psi/6250 psi $0.00



800' x 1" 3000 psi - Jet Rodder Hose - Continuous 3000 psi/7500 psi $5,553.00

Industrial Wash Down System

Debris Body Power Flush Out System, 8 jets $1,928.00

Debris Body Options

6" Knife Valve, Lower Rear Door Mounted with

Cam-Lock (Drain hose NOT included) (Drain hose NOT included) $2,160.00

8" Knife Valve, Lower Rear Door Mounted (Drain

hose NOT included) (Drain hose NOT included) $2,339.00


Mounted w/Cam-lock and 25' of layflat hose with

Cam-lock

$2,956.00

Prices Exhibit B


91

Debris Tank Inspection Hatch , 8" w/steps & handles $827.00

Rear, Hydraulic Pump Off System, 200 GPM w/20'

lay flat Hose Optional pump placement below $8,487.00

Rear, Hydraulic Pump Off System, 350 GPM w/20'

lay flat Hose Optional pump placement below $11,008.00

Rear, Hydraulic Pump Off System, 450 gpm with 20'

lay flat hose Optional pump placement below $14,548.00

Gravity Drain System; plumbing to gate valve at

mid-passenger side of unit, allowing return of liquids

to the manhole

$2,019.00







Electrical Options





Auxiliary Engine Kill Switch (Vandalism Protection) $144.00

Remote Control (Wireless): Boom, Vacuum Breaker,

Throttle & Debris Body (includes Hi-Dump, if

applicable). Does not include remote cable pendant

controls for boom or hi dump.



Grounding Cable with Screw Clamp & 25' of Cable $548.00












Prices Exhibit B


92




Omnibus Precision Power System (OPP)-Electronic

Controller System-Includes: a color monitor,

electronic footage counter, and pressure compensated

hydraulics. AVAILABLE: DUAL AND SINGLE

ENG MACHINES.

Compatible chassis: Freightliners with

Cummins ISL and Detroit Diesel DD13,

International with N-10, and Peterbilt with

ISL and PX

$5,887.00

Lighting Options









$994.00










Cord $1,132.00











Hydraulic Power Tool Option, Rear Bumper Control

Valve Mount Location $4,153.00



Cone Rack, between bogies, tandem $594.00


Prices Exhibit B


93


Remote Boom Grease Zerk Assembly (Ground Level

- includes water pump drive) - If Applicable $2,562.00

Remote Debris Tank Grease Assembly (Ground

Level) Does not include rollers or cams $2,760.00




Automatic Lube Kit for Centrifugal Compressor Available on 2-Stage or 3-Stage Blower $2,966.00

Vacuum gauge front bumper location behind reel $603.00



Centrifugal Compressor Quiet Silencer, Class 4, 304

Stainless Steel Construction, 14in x 40in with 8in

discharge

$5,148.00


French Decals $0.00







Long Handle Storage Placement - Rear of Mainframe

Must be picked with "Long Handle

Storage/ PVC (2)" above -

UNAVAILABLE ON 1500 GALLON

UNITS

$0.00

Cone Storage Rack - MUST SELECT PLACEMENT

BELOW $447.00


Option $0.00


Driver's Side


option $0.00


Curbside


option $0.00


Con to select


option $0.00


Rear storage bumper $2,087.00

Hydraulic Foot Controls for Front Bumper $7,200.00


Prices Exhibit B


94

Setcom Intercom Headset $750.00

Misc Accessories





First Aid Kit 690-0500 $105.00


Grease Gun 690-0093 $85.00


Vacuum Tubing








3' x 8" Clear Demo Tube 711-1255 $619.00












6" Adjustable Air Gap 6" Intake System (1) 6" quick clamp

included $480.00


6 1/2' x 6" Catch Basin Nozzle with Serrated End $231.00



locations in comments section, otherwise engineering

will place in best available locations.

Specify any requested location in

comments section $202.00


Prices Exhibit B


95


Aluminum Storage Box (Additional) Behind Cab 16"

x 42" x 96" $5,496.00

(2) Roll out shelves for storage box behind cab $1,712.00



ea (ilo steel) Consult factory for additional room $536.00

2 ) 24" x 18" x 18" Steel Rear Tool Boxes, mtd each

side of extended frame units, 1000 or 1300 gallons

only

$1,045.00

2 ) 24" x 18" x 18" Aluminum Rear Tool Boxes, mtd

each side of extended frame units, 1000 or 1300

gallons only

$1,775.00

(2) Front Bumper Tool Boxes 8"x14"x6" Aluminum 711-50463 Curbside/711-50484 Driver's

side $946.00

3/4" Spare Nozzles















1" Spare Nozzles









Prices Exhibit B


96















Spare Nozzles



Leader Hose
















Swedge Tools



1" Swage End $85.00

3/4" Swage End $81.00

Prices Exhibit B


97

3/4" Spare Nozzles


3/4" Bulldog 400.060A $3,397.00

Root Cutter


chain 10.125TR6-10 $4,498.00

Rotating Turbine Chain Scraper with skids and Chain

10.125TR8-12 set $4,711.00


Manuals




Ceramic Coating in Debris Tank, Tandem Axle $6,645.00



PPG code: 940813)

$0.00





Paint Module: Single-Stage Polyeurethene Elite Coca

Cola Red (PPG code: 911065) $0.00



















Prices Exhibit B


98








Green, Pink $739.00

Standard Striping Package - White 692-5204-01 $0.00





Extended Warranties


John Deere Tier 4 5YR/5000HR, Full Coverage

Warranty (March 1, 2017 - December 31, 2019) $4,261.00








Prices Exhibit B


99

Xcavator


Tel: 904-284-4200 Fax: 904-284-3305


Cyclone Separator

Hydrostatic Blower Drive

Front Loading 10' Telescopic Boom with Pendant Control Station

270 Degree Rotating Boom

8" Vacuum Intake Hose

Aluminum Diamond Plate Storage Boxes & Cabinets

Cross Linked Polyethylene Water Capacities: 800, 1100 & 1300 gallons with 10 Year Warranty

Automatic Vacuum Breaker Shut Off

20 gpm/4000 psi Water System - Hydraulically Driven

100' retractable high-pressure hose reel, high-pressure digging wand

Corten Steel Debris Body with 5 Year Warranty

5" Butterfly Valve with 10' Layflat Hose


Low Pressure Hand Gun with Quick Connect at Pump with 25' of 1/2" Hose

Full Opening Rear Door / Hydraulic Door Locks / Hydraulic Door Grabber

Boom Tie Down with Front Mounted Joystick for Ease of Operation

Passenger Side Controls

Passenger Control Panel Cabinet Aluminum Diamond Plate (35" x 14" x 24")

Water Pump and Hose Reel Cabinet / Passenger Side Aluminum Diamond Plate (51" x 20" x 30")

Storage Box Behind Cab Aluminum Diamond Plate (16" x 42" x 96")

Single Axle Units: Drivers Side Storage Cabinet Aluminum Diamond Plate (51" x 24" x 24")

Tandem Axle Units: Drivers Side Storage Cabinet Aluminum Diamond Plate (51" x 44" x 24")

Tandem Axle Units with 180" CT: Storage Box Behind Cab Aluminum Diamond Plate (16" x 42" x 48")

2 Joystick Controls 1-Passenger Side Control Panel, 1-Front Bumper

Emergency Shut Off

Reflective Striping / Side & Chevrons


ICC lighting




Prices Exhibit B


100

Set of Triangles


Debris Body Options

Dump High Option This option allows the operator higher debris body

dumping $2,679.00

Electrical Options




Models

VX390LH/800

Includes: 3 Stage Centrifugal Compressor with

Cyclone, Hydrostatic Drive, 10' Aluminum

Telescoping Boom, 9 CY Debris Tank, 800 Gal

H2O, 4X2

$237,307.00

VXPD3690LH/800



Drive and Cyclone Separator, Hydrostatic Drive,

10' Aluminum Telescoping Boom, 9 CY Debris

Tank, 800 Gal H2O, 4X2

$271,245.00

VXPD4290LH/800

Includes: 4200 cfm / 16" Hg. Positive

Displacement Blower with Cyclone, Hydrostatic

Drive, 10' Aluminum Telescoping Boom, 9 CY


$275,549.00

VXPD1290LH/800





$284,561.00

VX312LHE/1100




H2O, Extended Frame, 6X4

$260,035.00

VXPD3612LHE/1100





6X4. Consult Factory on Rear Axle Requirements

$293,977.00

VXPD4212LHE/1100





6X4

$298,276.00

VXPD1212LHE/1100 Includes: 1200 cfm / 27" Hg. Positive

Displacement Blower with Cyclone, Hydrostatic $308,722.00

Prices Exhibit B


101



6X4

VX312LHE/1300






High Dump.

$265,476.00

VXPD3612LHE/1300






$295,455.00

VXPD4212LHE/1300






$299,414.00

VXPD1212LHE/1300






$312,732.00

Booms

10' x 8" Aluminum Telescoping Boom with

Pendant Control Station Included in base price $0.00



Upgrade to 10" Boom Inlet, Boom and Elbow

with 10" to 8" Adapter & 8" Hose $7,090.00

Rear Mounted 8' x 8" Telescoping Boom with

steel elbow, Includes Flat Style Rear Door For Xcavator Units $5,816.00

8' x 8" Rear Mounted Telescoping Power Flex

Boom with Pendant Control Station For Xcavator Units $10,882.00

Blower Drives


Water Systems

20 gpm/4000 psi Water System - Hydrostatic

Drive $0.00




Centrifugal Compressor Fan Flush Out

System $1,291.00

Prices Exhibit B


102









Anti-Freeze System



only.

$2,187.00

Winter Recirculation System - 711-51253 /

711-51991 - Includes 110 volt invertor,

electric pump 30GPM, centrifugal check

valves and plumbing to upper water tanks

$2,897.00

Winter Recirculation System - FOR USE

WITH TRANSFER CASE DRIVEN WATER

PUMPS ONLY

$2,897.00


Winter Recirculating System for Rodder Hose

- ONLY for FEPTO-driven water pumps ONLY for use with FEPTO-driven water pumps $1,108.00






Side) $198.00



disconnects, 1/2 schedule 80, horizontal

handle


Available $0.00

711-30906 A 48" Extension for 711-53686









711-30903A Multiple Forward Jets with

Chisel Nozzle No extensions available $1,165.00

Prices Exhibit B


103

Debris Body Options


grabber

Removes door grabber; Stand. on Highdump; Not

Available w/ Flatdoor $4,051.00



6" Knife Valve with Center Post and Handle,

in Lieu of the 5" Butterfly Valve (662-0125) Standard drain hose included $788.00




handles $827.00














$2,019.00









mounted $2,834.00

Water Tank Side Panels, Diamond Plate

Aluminum $1,828.00




Wear Plate to cover entire rear door, with

hinge $1,075.00

Prices Exhibit B


104


Mounted $503.00


Ball $232.00


Debris Tank


option $828.00


Tank


option $828.00





BELOW $479.00


drain valve


assembly" $0.00

Debris tank drain screen placement - Rear

door pump off


assembly" $0.00


debris tank drain


assembly" $0.00




assembly" $0.00

Electrical Options





Breaker, Throttle & Debris Body (includes

Hi-Dump, if applicable). Does not include

remote cable pendant controls for boom or hi

dump.





Cable $548.00








Prices Exhibit B


105

Curbside Camera Placement - Mirror








Lighting Options







Tank Mounted - Whelen L21HAP LED


$994.00




Mounted - Whelen TA1251NF1 Traffic

Arrow

$3,997.00


Advisor $3,019.00



















Prices Exhibit B


106

Remote Boom Grease Zerk Assembly

(Ground Level - includes water pump drive) -

If Applicable

$2,562.00




Axle) $2,024.00


Axle) $2,421.00

Automatic Lube System - in addition to

manual remote grease options (Vac-Con

Module)

$5,678.00




standard) $1,837.00



4, 304 Stainless Steel Construction, 14in x

40in with 8in discharge

$5,148.00


French Decals $0.00




psi rating. (Delete driver side front water

tank).

$31,551.00








Mainframe



GALLON UNITS

$0.00



Cone Storage Rack Placement - Rear of

Frame Must be used with "Cone Storage Rack" Option $0.00



Prices Exhibit B


107




- Vac-Con to select Must be used with "Cone Storage Rack" option $0.00






ELBOW $1,433.00




Misc Accessories


First Aid Kit 690-0500 $105.00



Vacuum Tubing









End $395.00








8" Hose End 800-0097 $109.00

8" Power Clamp 680-0016 $123.00



Prices Exhibit B


108



End $231.00







Storage Box Behind Cab-TA 180" CT only,

Aluminum Diamond Plate, 16 x 42" x 48" Only available on Tandem Axle 180" CT Units $5,495.00

(2) Roll out shelves for storage box behind

cab $1,712.00

Heater for water pump & control panel box

633-1646 $3,124.00

Insulation for pump and control panel cabinets

(2) and water line plumbing $2,460.00


Behind Cab)


units $1,246.00


Side Behind Cab)


units $3,213.00





Heater for Storage Box Behind Cab and Side

Tool box

Heater for Storage Box Behind Cab 16"x42"x96",

and Side Tool box 51"x24"x24" SA or

51"x44"x24" TA

$3,124.00



Manuals






Ceramic Coating in Debris Tank, Tandem

Axle $6,645.00


Elite White (white is standard unless

otherwise specified. PPG code: 940813)

$0.00

Prices Exhibit B


109


Elite School Bus Yellow (PPG code: 916352) $0.00


Elite Safety Yellow (PPG code: 920225) $0.00


Elite Coca Cola Red (PPG code: 911065) $0.00


Elite Candy Apple Red (PPG code: 918623) $0.00


Elite Medium Blue (PPG code: 918345) $0.00


Elite Deep Blue (PPG code: 918377) $0.00


Elite Pepsi Blue (PPG code: 946949) $0.00


Elite Omaha Orange (PPG code: 917204) $0.00


Elite Cat Yellow (PPG code: 920339) $0.00


Elite Lime Green (PPG code: 905804) $0.00


Elite Green (PPG code: 918367) $0.00


Elite Woodland Green (PPG code: 918359) $0.00




Painted steel upper water tank panels in lieu

of standard aluminum diamond plate $611.00


Reflective Striping, Other than standard colors Avail colors: Black, Red, Orange, Yellow, Green,

Pink $739.00


01 $0.00

Standard Striping Package - Blue 692-5204-

02 $0.00





Prices Exhibit B


110







Mack Available – Call for

Quote

Freightliner Available – Call for

Quote

International Available – Call for

Quote

Peterbilt Available – Call for

Quote

Kenworth Available – Call for

Quote

Western Star Available – Call for

Quote

Prices Exhibit B


111

MASTER CONTRACT NO. 00120 - CATCH BASIN CLEANERS AND JET RODDER TRUCKS (VARIOUS SIZES) 1 (Rev. 2020-03-11) Exhibit C

Exhibit C

INSURANCE REQUIREMENTS

1. INSURANCE OBLIGATION. During the Term of this Master Contract, Contractor shall possess and maintain in full force and effect, at Contractor’s sole expense, the following insurance coverages:

a. COMMERCIAL GENERAL LIABILITY INSURANCE. Commercial general liability insurance (and, if necessary, commercial umbrella liability insurance) covering bodily injury, property damage, products/completed operations, personal injury, and advertising injury liability on an ‘occurrence form’ that shall be no less comprehensive and no more restrictive than the coverage provided by Insurance Services Office (ISO) under the most recent version of form CG 00 01 in the amount of not less than $2,000,000 per occurrence and $4,000,000 general aggregate. This coverage shall include blanket contractual liability coverage. This coverage shall include a cross-liability clause or separation of insured condition.

b. EMPLOYERS’ LIABILITY (STOP GAP) INSURANCE. Employers’ liability insurance (and, if necessary, commercial umbrella liability insurance) with limits not less than $1,000,000 each accident for bodily injury by accident, $1,000,000 each employee for bodily injury by disease, and $1,000,000 bodily injury by disease policy limit.

c. BUSINESS AUTO LIABILITY. Business Automobile Liability (owned, hired, or non-owned) covering the risks of bodily injury (including death) and property damage, including coverage for contractual liability, with a limit of not less than $1 million per accident.

The insurance coverage limits set forth herein are the minimum. Contractor’s insurance coverage shall be no less than the minimum amounts specified. Coverage in the amounts of these minimum limits, however, shall not be construed to relieve Contractor from liability in excess of such limits. Contractor waives all rights against the State of Washington for the recovery of damages to the extent such damages are covered by any insurance required herein.

2. INSURANCE CARRIER RATING. Coverages provided by the Contractor must be underwritten by an insurance company deemed acceptable to the State of Washington’s Office of Risk Management. Insurance coverage shall be provided by companies authorized to do business within the State of Washington and rated A- Class VII or better in the most recently published edition of Best’s Insurance Rating. Enterprise Services reserves the right to reject all or any insurance carrier(s) with an unacceptable financial rating.

3. ADDITIONAL INSURED. Commercial General Liability, Commercial Automobile Liability, and Pollution Liability Insurance shall include the State of Washington and all authorized Purchasers (and their agents, officers, and employees) as Additional Insureds evidenced by copy of the Additional Insured Endorsement attached to the Certificate of Insurance on such insurance policies.

MASTER CONTRACT NO. 00120 - CATCH BASIN CLEANERS AND JET RODDER TRUCKS (VARIOUS SIZES) 2 (Rev. 2020-03-11) Exhibit C

4. CERTIFICATE OF INSURANCE. Prior to execution of the Master Contract, Contractor shall furnish to Enterprise Services, as evidence of the insurance coverage required by this Master Contract, a certificate of insurance satisfactory to Enterprise Services that insurance, in the above-stated kinds and minimum amounts, has been secured. In addition, no less than ten (10) days prior to coverage expiration, Contractor shall furnish to Enterprise Services an updated or renewed certificate of insurance, satisfactory to Enterprise Services, that insurance, in the above-stated kinds and minimum amounts, has been secured. Failure to maintain or provide proof of insurance, as required, will result in contract cancellation. All policies and certificates of insurance shall include the Master Contract number stated on the cover of this Master Contract.

5. PRIMARY COVERAGE. Contractor’s insurance shall apply as primary and shall not seek contribution from any insurance or self-insurance maintained by, or provided to, the additional insureds listed above including, at a minimum, the State of Washington and/or any Purchaser. All insurance or self-insurance of the State of Washington and/or Purchasers shall be excess of any insurance provided by Contractor or subcontractors.

6. SUBCONTRACTORS. Contractor shall include all subcontractors as insureds under all required insurance policies. Alternatively, prior to utilizing any subcontractor, Contractor shall cause any such subcontractor to provide insurance that complies will all applicable requirements of the insurance set forth herein and shall furnish separate Certificates of Insurance and endorsements for each subcontractor. Each subcontractor must comply fully with all insurance requirements stated herein. Failure of any subcontractor to comply with insurance requirements does not limit Contractor’s liability or responsibility.

7. WAIVER OF SUBROGATION. Contractor waives all rights of subrogation against the State of Washington and any Purchaser for the recovery of damages to the extent such damages are or would be covered by the insurance specified herein.

8. NOTICE OF CHANGE OR CANCELLATION. There shall be no cancellation, material change, exhaustion of aggregate limits, or intent not to renew insurance coverage, either in whole or in part, without at least sixty (60) days prior written Legal Notice by Contractor to Enterprise Services. Failure to provide such notice, as required, shall constitute default by Contractor. Any such written notice shall include the Master Contract number stated on the cover of this Master Contract.

9. EXTENDED REPORTING PERIOD. If any required insurance coverage is on a claims-made basis (rather than occurrence), Contractor shall maintain such coverage for a period of no less than three (3) years following expiration or termination of the Master Contract.

MASTER CONTRACT NO. 00120 - CATCH BASIN CLEANERS AND JET RODDER TRUCKS (VARIOUS SIZES) EXHIBIT D 1 (Rev. 2020-03-11)

Exhibit D

Contractor Delivery Checklist Master Contract #00120

Purchase Order # __________ New Equipment #___________

Contractor Initials

Date

Provide the following required documentation, per Master Contract #00120, at time of delivery:

• The manufacturer’s line production sheet stating the equipment serial numbers and listing all of the equipment’s components

• Completed Invoice

• One (1) copy of the operator, maintenance and parts manuals. Digital copy preferred.

• The Manufacturer’s Statement of Origin (MSO)

• Axle weight slips (for all units with axles)

• Vehicle weight slips from certified scales 1) empty truck and 2) fully loaded with fresh water.

• A completed Washington State title application with original signature showing both the legal and registered owner as Purchaser. Contractor(s) may contact ordering Purchaser to obtain a Washington State title application or addresses, and information regarding the title.

• Engineering schematic drawings of the electrical and hydraulic systems. Digital copies preferred.

• All safety equipment in proper working condition. (Lights, reflectors, seatbelts, etc.)

• All required publications.

MASTER CONTRACT NO. 00120 - CATCH BASIN CLEANERS AND JET RODDER TRUCKS (VARIOUS SIZES) EXHIBIT D 2 (Rev. 2020-03-11)

Contractor Delivery Checklist Master Contract #00120

Contractor Initials

Date

The Contractor will ensure all of the items listed below are inspected prior to delivery.

• All hoses and wiring are protected from damage.

• All fluid levels have been checked and are at the manufacturer’s suggested levels.

• All components are in proper working condition.

• Welds are consistent and without cracks

• No runs, cracks or chips in the paint.

• The unit is clean inside/outside upon delivery.

• Supplier is 100 % compliant with the bid specification(s) as bid by the Contractor.

Comments:

Printed Name _____________________________

Signature ______________________________________

Date _______________________________________

Date post:	09-Nov-2021
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

KM C654e-20200925164355

Documents