Hoshizaki
© HOSHIZAKI AMERICA, INC.618 Hwy. 74 S., Peachtree City, GA 30269 TEL 1-800-438-6087 FAX 1-800-345-1325 www.hoshizaki.com
CUBER DIMENSIONSW x D x H
KML-250/351M_H04/04/16
Item #13224
LOW PROFILE MODULAR CRESCENT CUBER
Warranty Valid in United States, Canada, Puerto Rico, & U.S. Territories. Contact factory for warranty in other countries.Three Year - Parts & Labor on entire machine.Five Year - Parts & Labor on: Evaporator.Five Year - Parts on: Compressor, air-cooled condenser coil.
KML-250/351M_HItem #
Project:
Qty:
Hoshizaki reserves the right to change specifications without notice.
KML-250/351M_H30 x 273/8 x 22
*AutoCad available on KCL
KML-250M_H• Up to 314 lbs. of ice production per 24 hours
KML-351M_H• Up to 349 lbs. of ice production per 24 hours
KML-250M_H & KML-351M_H• Durable stainless steel exterior
• Individual crescent cube• Protected by H-GUARD Plus Antimicrobial Agent
• CycleSaverTM Design
• EverCheckTM alert system
• Stainless steel evaporator• Removable air filters (Air-cooled models only)
• Lower height for restricted areas (stairwells, low ceilings)
• R-404A Refrigerant
KML-250MAHAir-Cooled
Shown on an optionalB-500
KML-250MWHWater-Cooled
KML-351MAHAir-Cooled
KML-351MWHWater-Cooled
ICEDISPENSER
HOSHIZAKI
DB-200
B-500
B-250
Also available onBins:
B-700PF/SFB-800PF/SFB-900PF/SF
Large Bins:B-1150SSB-1300SSB-1500SSB-1650SS
11/2”1/2”
11/8”
*KM CUBE DIMENSIONS
*approximate size in inches, image not to scale
Hoshizaki DIMENSIONSW x D x H
© HOSHIZAKI AMERICA, INC.
KML-250/351M_HLOW PROFILE MODULAR CRESCENT CUBER
UTILITY CONSUMPTION
AIR-COOLED - KML-250/KML-351
Model Number
70˚50˚ 70˚
307 / 333
90˚
80˚90˚
Ice ProductionPer Cycle
KWH per100 LBS.
PotableWaterGal. per100 lbs.Lbs. Cubes
KML-250MWH
Air Tem
p˚ F.
Water Temp˚ F.
SPECIFICATIONS
Model Number Condenser Amperage Min. CircuitAmpacity
ShippingWeight
7.5 20 185 lbs.Water-CooledKML-250MWH
8.2 35.2
292 / 322287 / 318
287 / 318260 / 298
267 / 288245 / 262220 / 248
6.6 360
238 / 282
90/70
CondenserWaterGal. per100 lbs.
N/A
OPERAT ING L IM ITS• Ambient Temp Range 45 - 100˚F• Water Temp Range 45 - 90˚F• Water Pressure 10 - 113psig• Voltage Range 104 - 127V
ELECTRICAL & PLUMBING/KML-250/351M_H• 115/60/1• 20 amp Max Fuse/HACR Breaker Size• Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper WaterTubing or Equivalent• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or Equivalent
SERVICE• Panels easily removed and all componentsaccessible for service. • Removable/cleanable air filters.(Air-cooled models only)
618 Hwy. 74 S., Peachtree City, GA 30269 TEL 1-800-438-6087 FAX 1-800-345-1325 www.hoshizaki.com Printed in U.S.A.
KML-250/351M_H30 x 273/8 x 22
WATER-COOLED - KML-250/KML-351
70˚50˚ 70˚
314 / 349
90˚
80˚90˚Ai
r Tem
p˚ F.
Water Temp˚ F.
308 / 340307 / 337
307 / 337297 / 320
288 / 314274 / 295268 / 282289 / 307
KML-250MAH
5.9 28.97.0 360 110
8.2 20 185 lbs.Air-CooledKML-250MAH
STORAGE BINS
Model Number AHRI-Rated Storage Capacity*
B-500 360 lbs.B-700 550 lbs.
KML-351MWH
6.4 20.37.3 360 N/AKML-351MAH
5.4 20.57.2 360 143
7.5 20 185 lbs.Water-CooledKML-351MWH
13.2 20 185 lbs.Air-CooledKML-351MAH
FRONT VIEW(AIR-COOLED UNIT)
SIDE VIEW
ICE DROP ZONEREAR VIEW(AIR-COOLED UNIT)
WATER-COOLED UNIT
• Air-cooled
• Water-cooled
B-250 230 lbs.
B-800 600 lbs.B-900 660 lbs.B-1150 900 lbs.B-1300 950 lbs.B-1500 1120 lbs.B-1650 1210 lbs.
ELECTRICAL & PLUMBINGWater-Cooled Model (Lines Must be Independentof Icemaker)• Condenser Water Supply Line: Minimum 1/4” NominalID Copper Water Tubing or Equivalent• Condenser Drain/Return Line: Minimum 1/4” NominalID Hard Pipe (open drain system) or Copper Water Tubing(closed loop system) or Equivalent
* Rated in accordance with AHRI Standard 820 (I-P)