KNA9320 HERADESIGN FA6 OK - Home | Knauf · Contents 04 A natural mix 06 The breathable wall 10...

KNA9320_HERADESIGN_FA6 OK.indd 01KNA9320_HERADESIGN_FA6 OK.indd 01 10/4/2556 19:12:1010/4/2556 19:12:10

Contents

04 A natural mix06 The breathable wall10 Unlimited colour14 Clean colour15 The sound of natural18 The sound of architecture20 Baffled by sound22 Raft of options24 The range at a glance26 Edges and fixings

Cover imageProject: psychiatric hospital, Denmark; product: Heradesign superfine.

Printed on Novatech Satin. Novatech is an environmentally responsible paper produced from FSC (Mixed Sources) CoC certified pulp from Well Managed Forests, is Elemental Chlorine Free (ECF) and is made Carbon Neutral. Novatech is manufactured by Nordland Papier, a company certified with environmental management systems ISO14001 and EMAS, the EU Eco-Management and Audit Scheme (Reg.No.D-162-00007).

008622008622


02_03

Made in Austria from sustainable, PEFC-certified timber, pure magnesite and water, Heradesign® wood wool lining is a natural performer.

Heradesign

(Rosenheim’s Institute for Building Biology) Photocatalytic

Heradesign CE

EU Heradesign

, , ,

High-end Heradesign

Heradesign

Heradesign. See how natural sounds.

Project: Citizens Advice Bureau, Weinstadt, Germany; product: Heradesign superfine; colour: blackberry.


A natural mix Heradesign (

PEFC)

Heradesign Heradesign

90 ./ Heradesign 2kN/m2.


<Section heading>

04_05

A natural mix

Make an impact

1.

2.

3.

Heradesign

Heradesign Superfine Plano

Project: sport centre, Indurain, Spain;product: Heradesign fine; colour: natural.


The breathable wall

‘ ’

1. – 2. – 3. –

Project: Bremerhaven Klimahaus, Germany; product: Heradesign superfine; colour: green.


06_07

The breathable wall

Strategies for indoor air quality 3

Straube Acahrya “ ‘ ’ ”

PH ( )

PH 10 Heradesign Heradesign

Dynamic hygric response

Straube Acahrya “ (RH)

70% 80% RH (Adan 1994). “

RH

“

”

Project: health resort Aqualis, Belgium; product: Heradesign superfine; colour: white.

1 J F Straube, Research Engineer, Building Engineering Group, Civil Engineering Department, University of Waterloo, Waterloo, Ontario,Canada, and V Acahrya, Vice-President, Durisol Building Systems, ‘Indoor Air Quality, Healthy Buildings, and Breathing Walls’,http://oikos.com/library/breathingwalls/index.html.


Heradesign panels can be installed in areas withthe following daily average humidity

1 Ideal, all constructions and products.

2 Dry range, all products, only specific construction.

3 Humid range, only specific constructions and products with additional equipment – constructional consultation required.

4 Condensation range, only specific constructions, all products with additional equipment – constructional consultation required.

100

90

480

70

60

50

40

30

20

10

0

5 6 8 10 12 14 16 18 20 22 24 26 28 30 32

3

1

2

Ideal

Dry range

Too dry

Too humid

Humid range

Condensation range

Temperature (ºC, maximum 12-hour daily average)

Rel

ativ

e ai

r hum

idity

(%, m

axim

um 1

2-ho

ur d

aily

ave

rage

)

Application limit

Range limit


08_09

The breathable wall

Project: lawyer’s office, Iserlohn; architect: T Borchmann; product: Heradesign fine; colour: white.

Did you know?

1960

Das gesunde Haus [ ]

1970 Baubiologie Bund Architektur &

Baubiologie (BAB) Bund Architektur & Umwelt (BAU)


Unlimited colour

RAL, NCS BS Heradesign

PLY SPRVLE

Project: primary school, Rome, Italy; product: Heradesign.

Standard colours.


10_11

Unlimited colour

Colours available for Heradesign Trend Acoustic, Trend Acoustic FR and Trend Acoustic Plus

HERADESIGNACOUSTIC PANELS

STANDARD COLOURS (%) PASTELCOLOURS

SOLIDCOLOURS

METALLICCOLOURS*

SPECIAL COLOUR†

white beigesimilar to RAL 9010

beigenatural tone

Trend Acoustic

Heradesign superfine • • • • • •Heradesign fine • • • • • •Heradesign micro • • • • • •Heradesign macro • • • • • •Heradesign plano • • • •Trend Acoustic FR

Heradesign superfine A2 • • • • • •Heradesign fine A2 • • • • • •Trend Acoustic Plus

Heradesign superfine plus • • • • • •Heradesign fine plus • • • • • •Heradesign micro plus • • • • • •Heradesign plano plus • • • •

*In 12 colour tones of the Heradesign Metallic Collection (further colour tones only on request).

†For strong moisture or condensation exposure in a covered/sheltered outdoor application.

Please note: All colour tones and colour types can be provided with a BFA additive (film sealing for increased moisture exposure). Deviations in colour tone from the colour chart and colour perception are possible due to the rough fibre and panel surface.

Project: Erasmus University, Rotterdam; product: Heradesign superfine; colour: red.

No glitches

Heradesign Reel Forming ( , )

1 . Heradesign 1 .


Heradesign metallic colours

The following 12 metallic colours are available:

32809MMetallic salmon red

34800MMetallic dark violet

34806MMetallic blue-violet

35801MMetallic light blue

35808MMetallic turquoise

36800MMetallic sea green

37806MMetallic grey-aluminium

37808MMetallic iron mica

37807MMetallic white aluminium

34808MMetallic silver violet

34809MMetallic dark blue

35800MMetallic grey-blue


12_13

Unlimited colour

Colour me calm

Lene Bjerregaard, ,

Heradesign 11

Sto 35415 Sto 36102 Sto 31309 Sto 31303

Sto 34406 Sto 35110 Sto 32207 Sto 32203

Sto 37111 Sto white Sto 35805M


1 Materials and gases floating in the room air contact the coated surface of the walls and ceiling.

2 Light activates the catalyst in the coating and breaks the materials down to their basic components on the boundary surface.

3 The result is noticeably better room air.

Clean colour Heradesign

Photocatalytic , ,

( ), , () Heradesign

Photocatalytic Photocatalytic ( )

1 Cannot be applied to Heradesign fine/A2, and only for orders over 400m2.

Project: Volksschule Mils, Austria; product: Heradesign superfine; colour: natural.


14_15

The sound of natural

The sound of natural, ,

Heradesign Heradesign

Heradesign αw = 0.95

Project: Loft Metzingen, Germany; product: Heradesign superfine; colour: white.


How good is good?

αw NRC 1 = 5%

αw NRC

• NRC (250, 500, 1,000 2,000 Hz)

• NRC ,

• NRC ,

• 2

Project: primary school, Rome, Italy; product: Heradesign.


16_17

How good is good?

Frequency range of audible sound

What other tools can youuse instead of NRC?• ,

Sabine •

Source: Concepts in Architectural Acoustics by M David Egan.

16 31.5 63 125 250 500 1,000 2,000 4,000 8,000 16,000 32,000

22 11 5.5 2.75 1.37 0.69 0.34 0.17 0.085 0.044 0.022 0.11

Wave length (m)

Frequency (Hz)

Frequencies used to calculate NRC

HEARING RANGE FOR THE YOUNG

HEARING RANGE FOR THE OLD

SPEECH

PIANO

HOME STEREO

ACOUSTICAL LAB TESTS

Music rehearsals

Auditoriums

Gymnasiums

Cafeterias

Classrooms

0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8

Suitable reverberation times

SecondsSource: http://www.reverberationtime.com, www.acoustics.com.


The sound of architecture 6 ,

, , , 340

Sound is influenced by air

Project: opera and conference centre, Corunna, Spain; product: Heradesign superfine; colour: grey.


18_19

The sound of architecture

Heradesign

If you’d like to find out more, go to www.soundofarchitecture.com.au to download your copy of the e-book Acoustic Design: The Sound of Architecture, by Erik Ipsen, architect and Head of Research & Designat Knauf Danoline, and Marie Leth Rasmussen, journalist.

Project: McDonald’s McCafé, Klagenfurt, Austria; architect: Philippe Avanz; product: Heradesign; colour: chocolate.


Baffled by sound

Baffle Baffle

Baffle 25 . Baffle

Baffle Heradesign 600 . 3,000 .

Project: WakuWaku restaurant, Hamburg, Germany; interior design: Ippolito Fleitz group; photography: Zooey Braun; product: Heradesign.


20_21

Baffled by sound

PRODUCT* FORMAT (mm) THICKNESS/COMPOSITION** (mm) EDGE DESIGN WEIGHT (kg/sheet)

Heradesign superfine1,200/600 57 (15/25/15)

Metal frame

12.9

1,200/300 57 (15/25/15) 6.4

Heradesign fine1,200/600 57 (15/25/15) 13.5

1,200/300 57 (15/25/15) 6.7

*On request also available with Heradesign superfine A2 and Heradesign fine A2. **Individual thicknesses of acoustic linings (outside) and mineral wool core.

Heradesign baffles

Sizes of Heradesign for use in baffles


Raft of options Heradesign

Heradesign

Project: sports hall in Bierun, Poland; architect: Ryszard Szczlsny; product: Heradesign superfine; colour: white.

Heradesign ceiling panels


22_23

Raft of options

Ceiling panel cross-section

Corner piece

Slide piece 600Slide piece1,200

Heradesign ceiling panels with corner and side pieces


The range at a glance

Trend Acoustic

Heradesign superfineSingle-layer magnesite-bonded wood wool acoustic panel (fibre width 1mm). Exquisite surface structure; recommended by the Institute for Building Biology, Rosenheim.

Nominal dimension(mm)

600 x 600, 1,200 x 600

Thickness (mm) 15 25 35

Weight (kg/m2) 7.8 11.3 15

Standard coloursWhite, similar to RAL 9010, natural tone 13 (beige)

Sound absorption value αw to 1.00



Heradesign fine Single-layer magnesite-bonded wood wool acoustic panel (fibre width 2mm). Characteristic surface structure; recommended by the Institute for Building Biology, Rosenheim.

Nominal dimensions(mm)

600 x 600, 1,200 x 600

Thickness (mm) 15 25 35

Weight (kg/m2) 8.2 12.4 16.3






600 x 600, 1,200 x 600

Thickness (mm) 25 35

Weight (kg/m2) 15 19

Heradesign microSingle-layer magnesite-bonded wood wool acoustic panel with fine pored surface; recommended by the Institute for Building Biology, Rosenheim.


600 x 600, 1,200 x 600

Thickness (mm) 25

Weight (kg/m2) 15

Heradesign planoSingle-layer magnesite-bonded wood wool acoustic panel with closed surface; recommended by the Institute for Building Biology, Rosenheim.

Heradesign macroSingle-layer magnesite-bonded wood wool acoustic panel (fibre width 2mm). Characteristic surface structure; recommended by the Institute for Building Biology, Rosenheim.




24_25

The range at a glance



Trend Acoustic FR Trend Acoustic Plus

Heradesign micro plusDouble-layer acoustic panel as a composite product consisting of Heradesign micro and mineral wool absorber with crumble protection.

Nominal dimensions (mm) 1,200 x 600


Weight (kg/m2) 18.3 19.6

Heradesign plano plusTriple-layer acoustic panel as a composite product consisting of Heradesign plano and mineral wool absorber with crumble protection.






600 x 600, 1,200 x 600

Thickness (mm) 25

Weight (kg/m2) 18.5

Heradesign superfine A2Single-layer non-combustible magnesite-bonded wood wool acoustic panel (fibre width 1mm). Exquisite surface structure; recommended by the Institute for Building Biology, Rosenheim.

Nominal dimensions (mm)

600 x 600, 1,200 x 600

Thickness (mm) 25

Weight (kg/m2) 19.8

Heradesign fine A2Single-layer non-combustible magnesite-bonded wood wool acoustic panel (fibre width 2mm). Characteristic surface structure; recommended by the Institute for Building Biology, Rosenheim.





Heradesign superfine plusDouble-layer acoustic panel as a composite product consisting of Heradesign superfine and mineral wool absorber with crumble protection.


Thickness (mm) 40 50 55 65

Weight (kg/m2) 10.1 13.6 11.4 14.9


Thickness (mm) 40 50 55 65

Weight (kg/m2) 10.5 14.7 11.8 16

Heradesign fine plus Double-layer acoustic panel as a composite product consisting of Heradesign fine and mineral wool absorber with crumble protection.





Weight (kg/m2) 18.3 19.6


ABBR

EVIAT

ION

DESIG

N

DESC

RIPTIO

N OF

THE E

DGE

HERA

DESIG

N® S

UPER

FINE

HERA

DESIG

N® FI

NE

HERA

DESIG

N® MI

CRO

HERA

DESIG

N® PL

ANO 7

HERA

DESIG

N® SU

PERF

INE A

2 7

HERA

DESIG

N® FIN

E A2 7

REC.

SECT

ION

WIDT

H 8

NOTE

S

GRID

DIM

ENSIO

NS 2

PANE

L DIM

ENSIO

NS

15 25 35 15 25 35 25 35 25 25 15 25 mm L x B (mm) L x B (mm)

SYSTEM EDGES: SCREW MOUNTING

GK Straight edge on all sides. •••••• ••• 601

3

600 x 6001,200 x 600

600 x 6001,200 x 600

AK-00Bevelled on long sides, 5mm, straight edge on the face side.

•••••••• ••• 60 3600 x 600;1,200 x 600

600 x 600 ;1,200 x 600;

AK-01 Edge bevelled on all sides, 5mm bevel. •••••••••••• 60 3

600 x 600;1,200 x 600

600 x 600 ;1,200 x 600;

AK-02/5

Straight edge with shiplap on all sides, 5mm joint width.

•• •••• • • 60 3600 x 600;1,200 x 600

600 x 600 ;1,200 x 600;

AK-02/10

Straight edge with shiplap on all sides,10mm joint width.

•• •••• • • 60 3600 x 600;1,200 x 600

600 x 600 ;1,200 x 600;

AK-02/20

Straight edge with shiplap on all sides, 20mm joint width.

•• •••• • • 60 3600 x 600;1,200 x 600

600 x 600 ;1,200 x 600;

AK-03 Shiplap on all sides with bevelled edge, 5mm bevel. •• •••• • • 60 3

600 x 600;1,200 x 600

600 x 600 ;1,200 x 600;

VK-12Shiplap all round on alternating sides with bevelled edge, 5mm bevel.

• • • 60 3 1,190 x 590 ; 1,200 x 600 ;

SYSTEM EDGES: HERADESIGN T-TRACK SYSTEM 24/38 (VISIBLE SECTIONS), INSERTION INSTALLATION

SK-04 Straight edge on all sides. •••••••••••• 24246

600 x 600;1,200 x 600

594 x 594 ;1,194 x 594 ;

SK-05 Straight edge with shiplap on all sides. •• •••• • • 24

2

4

600 x 600;1,200 x 600

594 x 594 ;1,194 x 594 ;

SK-06 Shiplap on all sides with bevelled edge, 5mm bevel. •• •••••• • 24

2

4

600 x 600;1,200 x 600

594 x 594 ;1,194 x 594 ;

Edges and fixings


26_27

Edges and fixings

ABBR

EVIAT

ION

DESIG

N

DESC

RIPTIO

N OF

THE E

DGE

HERA

DESIG

N® S

UPER

FINE

HERA

DESIG

N® FI

NE

HERA

DESIG

N® MI

CRO

HERA

DESIG

N® PL

ANO 7

HERA

DESIG

N® SU

PERF

INE A

2 7

HERA

DESIG

N® FIN

E A2 7

REC.

SECT

ION

WIDT

H 8

NOTE

S

GRID

DIM

ENSIO

NS 2

PANE

L DIM

ENSIO

NS

15 25 35 15 25 35 25 35 25 25 15 25 mm L x B (mm) L x B (mm)

SYSTEM EDGES: HERADESIGN T-TRACK SYSTEM 35/38 (CONCEALED SECTIONS), SLIDE-IN INSTALLATION

VK-09

Grooved and bevelled on all sides, 5mm bevel.Note: The system cannot be disassembled!

•• •••••• • 353

5

600 x 6001,200 x 600

600 x 6001,200 x 600

VK-10

Grooved on long sides and bevelled on all sides, 5mm bevel.Note: The system cannot be disassembled!

• •• • 35

2

3

5

600 x 6001,200 x 600

615 x 6001,200 x 615

VK-10/5

Grooved on long sides and bevelled on all sides, 5mm bevel, 5mm shadow gap.Note: The system cannot be disassembled!

• •• • 35

2

3

5

600 x 6001,200 x 600

615 x 6001,200 x 615

SYSTEM EDGES: SPECIAL INSTALLATION (SPECIAL SECTIONS)

SY-02Retaining claw grooved on long sides and bevelled on all sides, 5mm bevel.

•• •••••• • 32 3600 x 600 ;1,200 x 600

600 x 600 ;1,200 x 600

SY-03For concealed top hat sections, straight edge on all sides with 5mm bevel all round.

•• •••• • • 122

4

600 x 600 ;1,200 x 600

600 x 600 ;1,200 x 600

SK-08

For visible top hat sectionsstraight edges on long sides,bevelled edges on the face side.

•• •••• • • 202

4

620 x 6001,200 x 620

595 x 600 ;1,200 x 595

NOTES1. The straight edge is not an exposed edge. Straight edge only produced at the request of the customer. (max. panel width 600mm). 2. The billing dimensions or alternatively the ordering dimensions are always the grid dimensions. 3. Installation pattern in cross joints requires careful installation, because four panel edges have to meet at one point.4. The panel dimensions are smaller than the grid dimensions.5. Custom formats only on request.6. Products of 15mm thickness are only available in the formats 600 x 600.7. Panel width max. 600mm.8. For screw mounting, the section width also applies to the wooden substructure.


For more information visit www.knauf.co.thor call +66 2 689 6077

At www.knauf.co.th

Design manuals

Installation instructions

Acoustic calculators

Speci cation pro formas

Project gallery

Make an enquiry


Date post:	11-Mar-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

KNA9320 HERADESIGN FA6 OK - Home | Knauf · Contents 04 A natural mix 06 The breathable wall 10...

Documents