Compliant with EN81-20/50 Lift Standards
KONE dEsigN cOllEctiON
Monospace®500
EN81-20 & EN81-50 lift standardsOn 1 september 2017, implementation of the two newly published EN81-20:2014 and EN81-50:2014 standards
for lift design and manufacturing will bring considerable benefits in terms of accessibility and safety for both
passengers and service engineers on all lift handovers. All lift handovers with a declaration of conformity signed
and dated on/after the 1 september 2017 must be compliant to the standards.
Safety requirements for passengers
Requirements related to Unintended car Movement (UcM) and ascending car overspeed
the requirements for the protection mechanism that address the risk of the car moving away from the landing have been enhanced. KONE already has lift solutions available that include standard features to address unintended car movement and KONE lifts also include standard features that address the risk of uncontrolled speed when the car is ascending.
safety requirements for service engineers
car roof balustrades
Balustrades located on the lift car roof now have defined strength requirements and updated height requirements. to reduce the risk of engineers falling into the shaft while working on the car roof. the new requirements are as follows:
• Where the distance between the inner edge of the balustrade handrail and the shaft wall is up to 500 mm, the balustrade must have a minimum height of 700 mm.
• Where the distance between the inner edge of the balustrade handrail and the shaft wall exceeds 500 mm the balustrade must have a minimum height of 1100 mm.
changes affecting building design
the EN 81-20:2014 and EN 81-50:2014 standard introduces some changes to the requirements that the building designer is required to fulfill. these changes all apply to the lift shaft, and are as follows:
• Potential shaft size changes• All glass used in the lift shaft must be laminated.• shaft walls to withstand 1000N• calculations for shaft ventilation• Protection of ledges greater than 150mm
More information
For full details of the new standards, customers should refer to the official EN 81-20:2014 and EN 81-50:2014 standards documents. Please contact your local KONE representative for more information.
2
3to create your own unique lift car using the KONE car designer tool, visit www.KONE.co.uk
Selectable car elements
Handrail
ceiling
skirting
side wall
Mirror
Rear wall
Floor
seat
tenant directory
digital info screencar operating panel (cOP)
KONE’s new, award-winning horizontal wall panel design is visually appealing and creates a spacious feeling inside the lift car.
Key
A
B
c
d
E
F
g
H
Blue
green
light BlueOrange
dark grey
Black
Pink
light grey
Price group F
Price group E
Price group c
Price group B
Price group A
Price group d
Price group g
Price group H
to create your own unique lift car using the KONE car designer tool, visit www.KONE.co.uk
i Yellow Price group i
4
Vertical2-panels per wall
Horizontal4-panels per wall
Wall Finishes
Asturias satinF (441)F (304)F (316)
SS1shangri-la gold
SS2Vegas gold
SS3Paris Black
HMurano Mirror
P50cloud White
TS1Flemish linen
SS4Aqua Weave
SS5golden linen
SS6sunlit twill
P52sunny Yellow
Kscottish Quad
P51Misty grey
P53dawn Red
P54sky Blue
Painted steel
Brushed stainless steel Mirror polished stainless steel
textured stainless steel
Etched stainless steel
Printed stainless steel
ES1silver diamond
ES2silver Bamboo
PS2dot cloud
ES3silver High-Rise
PS3Morning High-Rise
ES4golden Bamboo
PS4Blue diamond
Wall panel configuration
• All materials are available with vertical 2-panel per wall and horizontal 4-panel per wall designs for KONE Monospace® 500
• Material scaling & variability
• Patterned images not to scale. consult your sales representative for car designer tool and samples.
• Real wood laminates are made of natural materials so variation will occur.
A
BF d F F
c F F
gg gg
A A A A
c c
PS1Radiant Bamboo
A B
H HHH
cd
5
Wall Finishes
L217Windwall Orange
R30Nordic grey
Printed laminate
3d laminate
laminate
Metallic laminatecoated steelsteel
ZZinc coated, local paint or decoration
L210graphic Bamboo
L211chennai lights
L212colour cool
L213shanghai lights
L202Hazel Oak
L206Mandarin Orange
L203Almond Oak
L207lime green
L204cherry Oak
L208lotus Blue
L205Ebony Oak
L209snowberry White
L200Oriental gold
L201*Oriental Bronze
L214Aqua Blue
L215Aqua Black
L216Windwall White
Real wood laminate
L219Oak
L220Walnut
L221Wenge
L222Black Oak
L223Wild Wenge
A F F
EEEEE
Printed laminate wall finishes can be applied either on the back wall or side walls.
* due to the special characteristics of this material, the appearance of brush marks may vary between wall panels. Alignment of these markings cannot be guaranteed.
B
d d d d
ddd d
dd d d
F FFF
6
Brushed stainless steel
HMurano Mirror
Mirror polished stainless steel
SS1shangri-la gold
SS2Vegas gold
SS3Paris Black
P50cloud White
P51Misty grey
R30Nordic grey
coated steel
textured stainless steel
steel
TS1Flemish linen
Kscottish Quad
ZRaw surface
SS4Aqua Weave
Painted steel
Front Wall Finishes
c
A
Fd
BR1light Wood (Wl)
BR1lava Black (Rc26)
BR1Flemish linen (ts)
FAsturias satin
SS1shangri-la gold
Buffer Rails
skirting
BR1dark Wood (Wd)
dB
AAA
cc
F
cBA c
EAsturias satinF (441)F (304)F (316)
Bcd
7
Vinyl
stone
Metal plate
RC6dallas Black
RC20smoke grey
VF20Ash grey
SF30chalk White *
VF21sepia Brown
SF31grainy sand *
ALAluminium *
VF22carbon grey
SF32diorite Black *
ZRaw surface
VF23steel grey
VF24Jute Brown
RC21denver grey
RC22shell grey
RC23coral Red
RC24dusk Blue
RC25twilight Black
Rubber
local floor
Floor Finishes
A
B
AAA
AA
A
B B B B
ccc
c
* Vandal resistant EN81-71
Recessed for finish by othersMax 23mm
VF25Flaky grey
B
SF36spring sand
d
8
clear glass
Patterned glass
coloured glass
TW1 * glass
GW1siberian glaze
GW10Jaipur glaze
GW4Manhattan glaze
GW11soho glaze
G5silver Flow
G6White diamond
G11classic Bamboo
G7silver chain
G12*london lights
G9Night High-Rise
glass is only available to the rear wall as a single piece.
* Note these patterned glasses are transparent.
Rear Wall glass Finishes
i
ii i i
ii i i
i i
9
ceilings
type: CL98Finish: Asturias satin (F)
Murano Mirror (H)lighting: lEd spot lights, rectangular
type: CL95Frame finish: Asturias satin (F)
Murano Mirror (H)
centre panels: cloud White (P50) painted steellighting: t5 fluorescent tubes
type: CL97Finishes: Asturias satin (F)
Murano Mirror (H)
shangri-la gold (ss1) lighting: lEd spot lights, square
type: CL88 Finishes: Asturias satin (F)
cloud White (P50) Murano Mirror (H)lighting: lEd spot lights, roundNote: EN81-72 compliant version available
type: CL94 Finishes: Asturias satin (F)
cloud White (P50) Murano Mirror (H)lighting: t5 fluorescent tubesNote: EN81-71 cat1 compliant version available and EN81-72 is also available
type: RL12 Integrated ceiling Finishes: cloud White (P50)
Misty grey (P51)
lighting: lEd spot lights, round
10
3Bamboo
1geometric
2High-Rise
Graphic options for frosted white diffuser panel
ceilings
type: CL104Frame finish: Asturias satin (F)
Murano Mirror (H)
centre panels: cloud White (P50) painted steellighting: t5 fluorescent tubes
type: CL193Frame finish: Asturias satin (F)
centre panels: cloud White (P50) painted steel
lighting: t5 fluorescent tubes
type: CL151Frame finishes: Asturias satin (F)
shangri-la gold (ss1)
lighting: lEd panel with frosted white diffuser, plain or with graphics.
Not available with a mirror on car wall
type: CL181Finishes: Asturias satin (F)
Murano Mirror (H)
shangri-la gold (ss1) Vegas (ss2) lighting: lEd
type: CL162Finishes: Asturias satin (F)
Murano Mirror (H)
top panel: cloud White (P50) painted steel lighting: t5 Fluorescent tubes and lEd spot lights, square
11
HR64*Round, bent endsFinishes: Asturias satin (F) Murano Mirror (H) shangri-la gold (ss1) Vandal resistant
HR65*triangular, bent endsFinishes: Asturias satin (F) Murano Mirror (H)
HR71Roundlight Wood with Asturias satin fixings (WlF)golden brushed stainless steel fixings also available
HR34Round, bent ends Aluminium (lBE) with black end caps
HR81Round, sidewall and floor mounted Finishes: Asturias satin (F) Murano Mirror (H) shangri-la gold (ss1)
Handrails
Mirrors
MR1Full width/Partial height *
MR1Full width/Full height *
siZEs ANd POsitiONiNg
MR1Partial width/Partial height
MR1Partial width/Mid height
Mirrors can be located on the rear and side walls of the lift car. Mirror and handrail dimensions are determined by the wall width. Please consult your KONE sales representative for details.
12
stainless steel textured stainless steel
Etched stainless steel
coated steel Painted steel
TS1Flemish linen
Kscottish Quad
ES2 silver Bamboo
ZRaw surface
FAsturias satin
P55thunder grey landing door only
HMurano Mirror
SS1shangri-la gold
SS4Aqua Weave
ES5Brushed Bamboo
ES3 silver High-rise
R30Nordic grey
Narrow frame Frame
P50cloud White
P51Misty grey
steel
landing door types
PPainted steel
Note:Finish availability varies according to door type. consult your sales representative for more information.
car/landing door Finishes & Maintenance Access Panel
• Maintenance and rescue operations are integrated in a small cabinet
• integrated at topmost landing door or one floor below
• Wall MAP available also recessed and/or placed on side wall
MAP integrated intodoor frame
Maintenance Access Panel
Wall-mounted MAPWall- mounted MAP
TW1 transparent
glass Patterned transparent glass
G14 White Bamboo
G12london lights
Front Narrow frame door with glass panels
13
KSS 470Surface mounted signalisation
Ksi 471
KsH 470
landing devices
Ksl 470
car operating panel (cOP)
KSC 471Full height
Faceplate finishes: Asturias satin (F)
Displays: Ksc 471: dot matrix
Available with vertical paneling only
KSS 280Surface mounted signalisation
landing devices
car operating panel (cOP)
KSC 2963/4 height
Faceplate finishes:Black polycarbonate and deep formed Asturias satin (F) vertical hairline
Displays: segmented lcd
KSL 284
KSH 280 KSI 286
KSL 280
KONE signalisation
KSC 286Partial height
14
KSS 570Surface mounted signalisation
landing devices
Ksl 570
KsA 573
Ksi 573
KsH 570
Ksc 573/575Full height
Faceplate finishes: Asturias satin (F)Murano Mirror (H) golden Mirror (HtiN) Displays: Ksc 573: scrolling dot matrixKsc 575: Black and white lcd
car operating panel (cOP)
Available with vertical paneling only
KSS 140Flush mounted, vandal resistant signalisationAvailable with vertical paneling only
landing devices
Ksl 140
KSI 143
KsH 140
car operating panel (cOP)
KSC 140 Full height
Faceplate finishes: scottish Quad (K) orAsturias satin (F) Displays: scrolling dot matrix
KONE signalisation
15
KSS 670Flush mounted signalisation
landing devices
Ksl 670
KsA 673
Ksi 673/675
Ksc 673/675Full height
Faceplate finishes: Asturias satin (F)Murano Mirror (H)golden Mirror (HtiN)M M M Displays: Ksc 673: scrolling dot matrixKsc 675: Black and white lcd
car operating panel (cOP)
KONE signalisationKSS 800Surface mounted signalisation
KsP853 destination operating panel (dOP)
lift identifier (Eid)
Faceplate finishes: Black polycarbonate Displays: Ksc 863: scrolling dot matrix
car operating panel (cOP)
Ksc 863Full height
Kst 860 Active
Kst 850 Passive
KsP 853
touchscreen destination operating panel (dOP)
landing devices
KsP 858
16 selection of 8 solid colours is available for landing devices.
KSC D40 Full height Car operating panel (COP)
KSC D20Partial height Car operating panel (COP)
Landing devices (KSC D20, KSC D40, Unique/ Numbers and Blocks)
Unique designs
selection of 8 solid colours is available for landing devices.
Blocks Zoo Numbers
Note:Custom designs are also available. Contact your KONE sales representative for more information.
Ksl d20Ksl d40
Ksi d42
Ksi d41
KsH d20
Width 233 mm, height depends on car height and selected ceiling option
Width 200 mm, height 1300 mm
Same faceplate designs available as in Partial height KSC D20.
KONE design signalisation
17
KONE MonoSpace 500 minimum headroom height (SH) according to ceiling type
Speed(m/s)
Standard ceiling(mm)
RL12 CL88L *CL94L *CL162
CL193
1.0 cH + 1300 or 1700 cH + 1220 or 1620 cH + 1380 or 1780 cH + 1330 or 1730
1.6 cH + 1500 or 1900 cH + 1420 or 1820 cH + 1580 or 1980 cH + 1530 or 1930
1.75 cH + 1500 or 1900 cH + 1420 0r 1820 cH + 1580 or 1980 cH + 1530 or 1930
Frame widths: Frame door: (WW – ll – FW1 – FW) / 2 = 120 mm
Narrow frame: (WW – ll – FW1 – FW) / 2 = 50 mm
BB
DD
WD
Through type carCenter opening
WW
LL
LL
FW1 FW
BB
DD
WD
Through type car
Front Type CarsFrame Type Cars
Center openingWW
LL
LL
LW1 LW
BB
DD
WD
Single entrance carCenter opening
WW
LLFW1 FW
BB
DD
WD
Single entrance carCenter opening
WW
LLLW1 LW
BB
DD
WD
WW
Through type carSide opening
LL
LLFWFW1
BB
DD
WD
WW
Single entrance carSide opening
LLFWFW1
BB
DD
WD
WW
Single entrance carSide opening
LLLWLW1
BB
DD
WD
WW
Through type carSide opening
LL
LLLWLW1
Hea
droo
m h
eigh
t (S
H)
Trav
elPi
t he
ight
(PH
)
Car
Hei
ght
(CH
)
BB
DD
WD
Through type carCenter opening
WW
LL
LL
FW1 FW
BB
DD
WD
Through type car
Front Type CarsFrame Type Cars
Center openingWW
LL
LL
LW1 LW
BB
DD
WD
Single entrance carCenter opening
WW
LLFW1 FW
BB
DD
WD
Single entrance carCenter opening
WW
LLLW1 LW
BB
DD
WD
WW
Through type carSide opening
LL
LLFWFW1
BB
DD
WD
WW
Single entrance carSide opening
LLFWFW1
BB
DD
WDWW
Single entrance carSide opening
LLLWLW1
BB
DD
WD
WW
Through type carSide opening
LL
LLLWLW1
Hea
droo
m h
eigh
t (S
H)
Trav
elPi
t he
ight
(PH
)
Car
Hei
ght
(CH
)
BB
DD
WD
Through type carCenter opening
WW
LL
LL
FW1 FW
BB
DD
WD
Through type car
Front Type CarsFrame Type Cars
Center openingWW
LL
LL
LW1 LW
BB
DD
WD
Single entrance carCenter opening
WW
LLFW1 FW
BB
DD
WD
Single entrance carCenter opening
WW
LLLW1 LW
BB
DD
WD
WW
Through type carSide opening
LL
LLFWFW1
BB
DD
WD
WW
Single entrance carSide opening
LLFWFW1
BB
DD
WD
WW
Single entrance carSide opening
LLLWLW1
BB
DD
WD
WW
Through type carSide opening
LL
LLLWLW1
Hea
droo
m h
eigh
t (S
H)
Trav
elPi
t he
ight
(PH
)
Car
Hei
ght
(CH
)
BB
DD
WD
Through type carCenter opening
WW
LL
LL
FW1 FW
BB
DD
WD
Through type car
Front Type CarsFrame Type Cars
Center openingWW
LL
LL
LW1 LW
BB
DD
WD
Single entrance carCenter opening
WW
LLFW1 FW
BBD
D
WD
Single entrance carCenter opening
WW
LLLW1 LW
BB
DD
WD
WW
Through type carSide opening
LL
LLFWFW1
BB
DD
WD
WW
Single entrance carSide opening
LLFWFW1
BB
DD
WD
WW
Single entrance carSide opening
LLLWLW1
BB
DD
WD
WW
Through type carSide opening
LL
LLLWLW1
Hea
droo
m h
eigh
t (S
H)
Trav
elPi
t he
ight
(PH
)
Car
Hei
ght
(CH
)
Single entrance car (SEC)
Through type car (TTC)
Side opening
Side opening
centre opening
Centre opening
Frame and narrow frame door types
Hea
droo
m h
eigh
t (S
H)
Trav
elPi
t hei
ght (
PH)
Car
Hei
ght
(CH
)
Pit
heig
ht (
PH)
(H
R)
(H
H)
Hea
droo
m h
eigh
t (S
H)
Trav
elPi
t hei
ght (
PH)
Car
Hei
ght
(CH
)
Pit
heig
ht (
PH)
(H
R)
(H
H)
Q = Rated load of liftBB = Car widthDD = Car depthCH = Car clear heightFW1 = Side wall left - frame door application onlyHH = Door clear opening height HR = Door raw opening heightLL = Door clear opening widthWW = Shaft widthWD = Shaft depth
* These ceilings are applicable to fire fighting lifts BS EN81-72 To ensure that your ceiling height complies with EN81-20/50, please consult your KONE representative
KONE MonoSpace 500 duty range
Speed(m/s)
Load (kg)
Travel(m)
Stops
1 320 -1150 55 21
1.6 400 - 1150 75 24
1.7 5 400 - 1150 75 24
KONE MonoSpace 500 pit depth (PH)
Speed (m/s)
Standard With counter-weight safety gear
1.0 1050 1400
1.6 1200 1400
1.75 1200 N/A
Max 1550
KONE Monospace® 500 Planning guide
800/9001900/1950
1400
1400
1750/1950
9001750/1950
2100
2400
(251
0)
1100
1700 1350
1800
800/900
1100
800/9001950
15001400
1850
1850
1950/2350
1400
2150
900/1100
1400
2150/2350
1600
1900
900/1100
(226
0)
800/9001470/1600
12501000
1625
(191
0)
800/9001570/1600
2100
2475
(271
0)1100
800/900/1000
15001400
1875
(211
0)
1900
18501400
2225
800/900/1000
1900
800/9001570/1600
14001100
1775
(201
0)
6/480kg 8/630kg
15/1150kg
12/900kg 13/1000kg
8/630kg 10/800kg 12/900kg
15/1150kg13/1000kg
13/1000kg
For options not shown, including loads, car sizes, entrance sizes and speeds, please contact your local KONE representative. Bs EN 81-21 (existing building)Bs EN81-70 (accessibility)Bs EN81-72 (fire fighting)Bs EN81-71 category 1 (vandal resistant)Bs EN81-73 (fire behaviour)Bs 9999 Annex g (evacuation control)
side opening doors
centre opening doors
18
KONE Monospace® 500 Planning guide
19
Options
IS08 standard version, 8.4” display surface mounted
IS15 Premium version, 15” display surface mounted
digital info screens
card readers
card reader card reader with PiN
Our user-friendly, integrated access and destination solutions are designed to make it easy for people to move throughout your building.
Wireless 3g gsM
KONE’s wireless 3g gsM unit is a cost effective solution for single units and goes hand-in-hand with KONE Remote Monitoring (KRM) system.
Easy installation and configuration by KONE with no extra lead time or phone line operator required.
54
851Access cards for
end users
Recommended options to enhance lift performance and passenger experience
Residential Retail Office Hotel Leisure & Education
Advanced door opening (ADO) a a a
Quick close on call (QCC) a a a
Parking at main/pre-defined floor
(PAM/PAD)a a a a
Out of service switch in car (OSS
COI)a a a
BMS elevator link (LIL) a a a a a
Bypass load function (BLF) a a a
Extended door opening (DOE B) a a
Automatic switch-off (SBM) a a a a a
More suggestions
20
Your trusted lift partnerWith over 100 years of experience in the lift and escalator business, KONE is your trusted partner dedicated to
ensuring smooth People Flow® in your building. We revolutionised the industry in 1996 with the world’s first
machine room-less lift – the KONE Monospace® – and the energy-efficient KONE Ecodisc® hoisting machine. Our
proven track record, including half a million KONE Ecodisc installations worldwide, speaks for itself.
We have listened to our customers and carefully analysed each and every part of our industry-leading lift solution
and renewed it from top to bottom. Everything we did best, we’ve made even better.
KONE care maintenance
A stRONg tRAcK REcORd
• 9 out of 10 KONE customers recommend us as a partner
• More than 100 years of experience in the lift industry
• Half a million KONE Ecodisc installations worldwide• Over 850,000 lifts and escalators in service• 35,000 dedicated experts worldwide
KONE sets the standard for advanced maintenance services, ensuring you get the longest lifespan and the best
performance out of your equipment. KONE care maintenance packages are tailored to suit your needs. Our
Modular-Based Maintenance method, which tailors a unique maintenance plan for every building and piece of
equipment, is the leading preventive maintenance method in the industry. in addition, our locally based customer
care centre leads the field in providing efficient and effective care services.
KONE CareTM
Standard
Compliance safety compliance for people who don’t want to worry about lift maintenance
KONE CareTM
Plus
Transparency Helping you manage your equipment plan for the future
KONE CareTM
Premium
Performance Because your business depends on it.
21
Easy selection of car interiors. From a collection of functional and visually appealing designs created by KONE’s award-winning design professionals.
The most flexible and versatile offering. the KONE design collection includes 52 stylish car interiors. We also offer 100 different materials and accessories that can be combined freely and used in all lift products, for both new buildings and modernisation projects.
The most innovative materials. the combination of unique textured, patterned and 3d-effect wall materials with novel lighting solutions creates a stunning visual effect.
Award-winning design. KONE’s lift and signalisation design concepts have received both Red dot and good design awards.
What sets KONE design apart
3
4
21 Think about your building design:
• What kind of overall look are you aiming to achieve? Modern or more traditional? Bold and bright, or subtle and minimalist?
• What kind of ambiance are you looking for? cool and light or warm and cosy?
• is your detailing simple or more rich?
• What materials and colours does the building include?
Get inspiration from our six design themes, browse through our car designs and find the one that best matches your building interior.
For a truly unique look, try our Car Designer tool, where you can mix and match materials and accessories to create a virtual experience of your very own lift car design.
Talk to a KONE expert, who will be able to give you professional advice on what design might best fit your building.
32
1
choosing the right design
4
gOOd dEsigN Adds REAl VAlUE
A well-designed lift can have a huge impact on the way people feel about your building and connect with it. From residential buildings and
hotels to retail and office environments, the ability to give people a comfortable ride in a pleasant, accessible environment speaks volumes
about your building and your values.
• A well-designed lift has a positive impact on everyday living in residential buildings. it should combine sophisticated design details with practical, functional features.
• in hotels and retail environments, combining inspiring design with reliable operation and excellent usability creates a positive lasting impression for guests and visitors alike.
• in commercial spaces such as offices, a visually impressive lift that also delivers great performance is a compelling factor for both potential and existing tenants.
cUttiNg-EdgE dEsigN BAsEd ON iN-dEPtH REsEARcH
this collection is the result of years of expert design research. drawing on continuous studies of the latest trends in architecture, design and material technology, our team of design professionals has created a diverse set of themes that appeal to a wide variety of tastes and are flexible for use in a range of different environments. the unique patterns and material finishes we offer have been created especially for KONE in close collaboration with our R&d team and our partners.
Award Winning designPatterns that catch the eye. Finishes that enhance the look and feel of your building. lighting that adds mood and atmosphere. Material combinations that inspire and delight. Add emotion to your lift with the KONE design collection.
4 Red dot design awards2 good design awards
22
top-class energy efficiency
2 Eco-efficient regenerative drive
Our latest regenerative drive recycles energy for immediate reuse within the building and cuts consumption by up to 20%.
3 Long-lasting LED lighting
As well as being 80% more efficient than halogen lighting, lEd lighting also lasts 10 times longer.
4 More advanced standby solutions
Upgraded standby solutions power down the equipment when it is not in use, providing substantial energy savings.
More efficient hoisting machinery
the completely renewed KONE Ecodisc® hoisting motor and highly efficient drive system delivers even better energy efficiency, helping to reduce both operating costs and your building’s carbon footprint.
1
sAVE ENERgY, sAVE sPAcE
As well as offering world-class energy efficiency, because the renewed KONE Monospace® is now even more compact it also helps you save valuable space.
• The highly compact lift equipment – including the KONE Ecodisc hoisting machine and other mechanical structures – now requires even less height and width in the shaft.
• this frees up valuable floor space or allows for a more spacious, higher-capacity car.
• When replacing an existing lift, the new KONE Monospace eliminates the need for a machine room and maximises lift capacity within the existing shaft dimensions.
cONtRiBUtiNg tO sUstAiNABlE URBANisAtiON
KONE, an innovative leader in the lift and escalator
industry, is the first company to annouce the A-class
energy effciency classification according to isO 25745-2
for its customer reference cases.
Published in March 2015, isO 25745 is the global
standard for the energy calculation and classification
of lifts and escalators. the A-class rating is the best one
that can be given to lifts under the new standard. A+++
is the best rating that escalators can receive.
KONE has a long history in makings its lifts more energy
efficient, this has been achieved by using innovative
and eco-efficient technologies such as regenerative
drives, standby solutions and lEd lighting that
drastically reduces the energy consumption of the lift.
By installing a eco-efficient KONE lift solution, you can
help achieve a green bulding accreditation such as
lEEd and BREEAM for your building design.
KONE MonoSpace® 500Lift Type Traction
Operating days / year 365
Usage category 2
Date of evaluations Nov 20, 2014
Load kg 630
Speed m/s 1.0
Energy efficiency class A
KONE EcoSpace®
Lift Type Traction
Operating days / year 365
Usage category 1
Date of evaluations Dec 16, 2014
Load kg 630
Speed m/s 0.63
Energy efficiency class A
KONE MiniSpace®
Lift Type Traction
Operating days / year 365
Usage category 4
Date of evaluations Nov 18, 2014
Load kg 1,200
Speed m/s 4.0
Energy efficiency class A
23
industry-leading ride comfortFOR tHE BEst POssiBlE PAssENgER EXPERiENcE
All liFts tEstEd FOR RidE cOMFORt – A sERVicE UNiQUE tO KONE
• KONE provides a comprehensive ride comfort testing service as standard for all its lift installations.
• Your lift will not be handed over for use before it passes this test, which measures noise and vibration levels inside the car.
• this thorough quality and reliability testing prior to handover further reduces the need for unplanned maintenance callouts.
Every aspect of the upgraded KONE Monospace® is designed to add real value to your
building and maximise comfort, safety and convenience for passengers. the renewed
KONE Ecodisc® hoisting machine is complemented by a wide range of other upgrades
that are designed to deliver industry-leading ride comfort year after year.
32 Redesigned hoisting system for minimised vibration and noise
• centralised, low-friction hoisting cuts noise and vibration, improving comfort for passengers and minimising disturbance to the surrounding areas.
1 Renewed machinery and brakes
• the new, highly reliable motor control system further improves ride comfort, with smooth acceleration and deceleration and highly accurate car leveling.
• the renewed braking system ensures a comfortable, safe, quiet ride, while also minimising noise transfer to the surrounding areas.
• the new brake test functionality automatically checks brake condition daily. this helps to further improve safety and reliability.
Improved car structure for a more comfortable ride
• the rigid structure and noise isolation of the renewed lift car ensure a smooth and comfortable ride.
• New isolated guide shoes, constructed using low-noise sliding material, further help to reduce noise.
the paper used in this publication is 80% recycled and exceeds the strict environmental standards laid down by the Forest stewardship council (Fsc).
KONE provides innovative and
eco-efficient solutions for lifts,
escalators, doors, loading bays and
access. We support our customers
every step of the way; from design,
manufacturing and installation to
maintenance and modernisation.
KONE is a global leader in helping
our customers manage the
smooth flow of people and goods
throughout their buildings.
Our commitment to customers
is present in all KONE solutions.
This makes us a reliable partner
throughout the life-cycle of
the building. We challenge the
conventional wisdom of the
industry. We are fast, flexible
and we have a well-deserved
reputation as a technology leader,
with such innovations as KONE
UniDrive™, KONE MonoSpace®,
KONE MaxiSpace™ and KONE
InnoTrack™. You can experience
these innovations in architectural
landmarks such as 30 St Mary Axe
and Broadgate and 201 Bishopsgate
buildings, BAA Terminal 5, Emirates
Stadium, Brunel University,
Citigroup, Jubilee Line and St.
Georges Wharf.
KONE employs on average 50,000
dedicated experts to serve you globally
and locally.
KONE plc
Head Office
KONE plc, Global House, Station Place, Chertsey,
Surrey, KT16 9HW
Regional Offices
KONE plc, Unit 2/3 View Point,
Basings View, Basingstoke,
Hampshire, RG21 4RG
KONE plc, 2425 Regents Court,
The Crescent, Birmingham Business Park,
Solihull, B37 7YE
KONE plc, Pavilion 1, Parkway Court
251 Spring Hill Parkway, Glasgow Business Park,
Ballieston, Glasgow, G69 6GA
KONE plc, Worth Bridge Road, Keighley,
West Yorkshire, BD21 4YA
KONE plc,
50 Bedford Road, Clapham,
London, SW4 7HJ
KONE plc, Block C Millennium Business Park,
922 Birchwood Boulevard,
Birchwood, Warrington,
Cheshire, WA3 7QN
General Enquiries
Tel: 0845 1 999 999
www.kone.co.uk
KONE provides innovative and
eco-efficient solutions for lifts,
escalators, doors, loading bays and
access. We support our customers
every step of the way; from design,
manufacturing and installation to
maintenance and modernisation.
KONE is a global leader in helping
our customers manage the
smooth flow of people and goods
throughout their buildings.
Our commitment to customers
is present in all KONE solutions.
This makes us a reliable partner
throughout the life-cycle of
the building. We challenge the
conventional wisdom of the
industry. We are fast, flexible
and we have a well-deserved
reputation as a technology leader,
with such innovations as KONE
UniDrive™, KONE MonoSpace®,
KONE MaxiSpace™ and KONE
InnoTrack™. You can experience
these innovations in architectural
landmarks such as 30 St Mary Axe
and Broadgate and 201 Bishopsgate
buildings, BAA Terminal 5, Emirates
Stadium, Brunel University,
Citigroup, Jubilee Line and St.
Georges Wharf.
KONE employs approximately
35,000 dedicated experts to serve
you globally and locally in
50 countries.
KONE plc
Head Office
KONE plc, Global House, Station Place,
Chertsey, Surrey, KT16 9HW
Regional Offices
KONE plc, Unit 5 Beechwood,
Chineham Business Park, Basingstoke,
Hampshire, RG24 8WA
KONE plc, 2425 Regents Court,
The Crescent, Birmingham Business Park,
Solihull, B37 7YE
KONE plc, Suite G7/G4, Duart House,
Finch Way, Strathclyde Business Park,
Bellshill, ML4 3PR
KONE plc, Worth Bridge Road,
Keighley, West Yorkshire, BD21 4YA
KONE plc, 34 Bedford Road,
Clapham, London, SW4 7HJ
KONE plc, Block C Millennium Business Park,
922 Birchwood Boulevard,
Birchwood, Warrington,
Cheshire, WA3 7QN
General Enquiries
Tel: 0845 1 999 999
www.kone.co.uk
KeyHead OfficeOfficesBranches
The paper used in this publication is 80% recycled and exceeds the strict environmental standards laid down by the Forest Stewardship Council (FSC).
This publication is for general informational purposes only and we reserve the right at any time to alter the product design and specifications. No statement contained in this publication shall be construed as a warranty or condition, express or implied, as to any product, its fitness for any particular purpose, merchantability, quality or shall be interpreted as a term or condition of any purchase agreement for the products or services contained in this publication. Minor differences between printed and actual colors may exist. KONE and Dedicated to People Flow™, KONE MonoSpace®, KONE MaxiSpace™, KONE MiniSpace™, KONE ReSolve™, KONE E-Link™, KONE Polaris™, KONE ReGenerate™, KONE IDE300™, KONE Care for Life™, KONE ReNova™ and KONE ReFresh™ are trademarks or registered trademarks of KONE Corporation. Copyright 2012 KONE Corporation.
MonoSpace_700_Design_book_v6_reprint_GB.indd 32 29/07/2014 11:40:39
This publication is for general informational purposes only and we reserve the right at any time to alter the product design and specifications. No statement contained in this publication shall be construed as a warranty or condition, expressed or implied, as to any product, its fitness for any particular purpose, merchantability, quality or shall be interpreted as a term or condition of any purchase agreement for the products or services contained in this publication. Minor differences between printed and actual colors may exist. KONE®, Dedicated to People Flow™, KONE MonoSpace®, KONE MiniSpace™ KONE EcoDisc®, KONE MaxiSpace™, KONE InnoTrack™ are trademarks or registered trademarks of KONE Corporation. Copyright © 2015 KONE Corporation. Data correct at time of print.
KONE TravelMaster™ 110SMOOTH PEOPLE FLOW® FOR COMMERCIAL ENVIRONMENTS
8001/MAY2015