Date post: | 02-Oct-2015 |
Category: |
Documents |
Upload: | reyuer-euru |
View: | 563 times |
Download: | 35 times |
The Eta pump family keeps the world on the move
Our technology. Your success.Pumps n Valves n Service
One pump family: limitless options
The Eta pump family keeps the world on the move with the unrivalled diversity
of its pumps and service options. All Eta pumps offer optimised hydraulic systems
in an (almost) infinite number of variants.
Eta is the worlds best-selling standardised water pump: our factories have by now
produced over 1.5 million Eta pumps, all featuring tried-and-tested designs that have
benefited from decades of continual optimisation. This is all the more remarkable
when one considers that every Eta is manufactured to specific customer requirements.
The Eta pump family comprises 43 different sizes which can be driven by 2-pole,
4-pole or 6-pole motors. The range has been extended to include additional sizes so
that pumps can now be selected even closer to the best efficiency point. In addition,
every Eta built by us is fitted with an impeller that is trimmed exactly to the optimum
operating point. Variety is our standard.
FluidFuture: one step ahead in achieving energy efficiency
Our holistic energy efficiency concept FluidFuture analyses systems as a whole
and is therefore always one step ahead of the standards required by law. Within
its five modules system analysis, selection, high-efficiency pumps and valves,
high-efficiency drives and demand-driven operation, we provide a bundle of
coordinated measures, services and products to increase your systems efficiency.
Find out more at www.ksb.com/fluidfuture
The new-generation Eta type series as high-efficiency models equipped withKSB SuPremE motor and PumpDrive.
02 Benefits
Energy efficiencyn Outstanding hydraulic design, excellent efficiency
n Already meets the energy requirements of tomorrow
n Impellers trimmed as standard
Versatilityn Wide variety of materials for perfectly matching the
pump to the fluid handled
n Comprehensive selection chart extended by additional
sizes for small flow rates
Ease of maintenancen Short delivery times of pumps and spare parts
n Straightforward dismantling and reassembly
Find out more at www.ksb.com/eta-en
Comprehensive know-how meets the very best in service
Pumps from the Eta ranges are particularly service-friendly, a factor we pay attention
to right from the development stage. Whether pumps and valves, system solutions or
services we always give one hundred percent for our customers. With bespoke service
concepts, service for other rotating equipment and original spare parts, our global KSB
Service provides customers with comprehensive expert support and assistance round
the clock. From the selection of a suitable pump to commissioning, maintenance, spare
parts supply and repairs during the operation phase all the way to refurbishment and
decommissioning: we are there whenever you need us.
Find out more at www.ksb.com/service
03
Etanorm: performance by design meets excellent efficiency
Etanorm is the worlds best-selling standardised water pump. But that
hasnt stopped us making improvements: optimised hydraulic systems save
up to 7,000 kW/h of energy a year which means cost savings of several
thousand euros per pump and markedly reduced CO2 emissions.
Further energy savings can be achieved with high-efficiency drives like the
KSB SuPremE motor, via variable speed operation with PumpDrive or with
the intelligent pump monitoring system PumpMeter.
Your benefits at a glance:
n Significant energy savings and improved efficiency
n Compliant with Commission Regulation 547/2012/EC
n Can be combined with the KSB SuPremE motor to achieve efficiency
class IE4* today
n Confined casing gasket for varying operating conditions
n Additional sizes for low flow rates
n Enlarged seal chamber and forcing screws between casing cover and
bearing bracket for straightforward dismantling / reassembly
n Impeller diameter trimmed to optimum operating point as standard
Etanorm with KSB SuPremE motor,PumpDrive and PumpMeter
*IE4 to IEC (CD) 60034-30 Ed. 2In this brochure the "ErP 2017+" logo applies to the KSB SuPremE motor shown.
04 Etanorm
05
Etaline: the flexible in-line pump for a wide range of applications
Etaline can be installed horizontally or vertically
directly in the pipeline, is available in 22 different sizes
and can be manufactured in a wide range of materials
to pump the most varied fluids. But best of all, the
new Etaline is remarkably efficient: when combined
with the high-efficiency KSB SuPremE motor and
the PumpDrive variable speed system, Etaline is the
worlds most efficient magnet-less pump set.
The new PumpDrive: Flexible speed control for maximum energy efficiency
n Optimum speeds translate into maximum savings:
in combination with KSB SuPremE motor and
PumpMeter, in multiple pump operation, and via
dynamic pressure setpoint compensation
n Full transparency adds operating reliability: via
characteristic curve control, flow rate estimation,
package for waste water applications and full
redundancy dual-pump management
n Flexible use: power ratings from 0.37 kW up to
1.4 MW, various mounting options and field bus
modules
All information available at:
www.ksb.com/fluidfuture-en/
operation/pumpdrive
06 Etaline
The worlds most efficient magnet-less pump set: Etaline with KSB SuPremE motor, PumpDrive and PumpMeter
*IE4 to IEC (CD) 60034-30 Ed. 2.
Your benefits at a glance:
n Can be combined with KSB SuPremE motor to
achieve efficiency class IE4* today
n Flange connections to EN, optionally drilled to ASME
n Standardised mechanical seal from codes 6 to 11
available as standard
n Replaceable casing wear rings
n Low vibration levels and very smooth running
n Confined casing gasket
n Designed for operating pressures of up to 16 bar
n Also available in twin-pump design Etaline Z
for maximum operating reliability
07
Etabloc: the space-saver thats compact by design
Your benefits at a glance:
n Can be combined with the KSB SuPremE motor
to achieve efficiency class IE4* today
n Use with PumpDrive for maximum energy
efficiency and complete operational transparency
n Pump without separate coupling aligning is
not required
n Wide variety of materials for many applications
available as standard
n Additional pump sizes for small flow rates
n Simplified dismantling and reassembly thanks
to enlarged seal chamber
The perfect match: combined with the KSB SuPremE motor, PumpDrive and PumpMeter, Etabloc achieves extremely high levels of energy efficiency.
*IE4 to IEC (CD) 60034-30 Ed. 2.
08 Etabloc
Etabloc comes into its own in situations where every
centimetre counts: with pump and motor connected in one
compact unit it features an extremely space-saving design
that is perfect when things get tight. And all this without
sacrificing excellent efficiency!
09
10 SYT
Whenever things get hot, you need specialists on hand. The SYT
variants of Etanorm, Etaline and Etabloc offer the highest levels
of operational reliability and are especially suitable for use in
heat transfer systems (to DIN 4754 and VDI 3033) or for hot
water circulation.
SYT: the thermal oil and hot water pumps that are reliable by design
Your benefits at a glance:
n Highly effective venting contour for
optimised venting
n Little wear
n Replaceable casing wear rings
n Easily dismantled bearing bracket
n Double mechanical seal in tandem arrangement
n Particularly energy-efficient with the IE4*-class
KSB SuPremE motor
Etanorm in SYT design with KSB SuPremE motor and wall-mounted PumpDrive
*IE4 to IEC (CD) 60034-30 Ed. 2.
11
Every pump of the Eta family requires a drive solution to match. The actual
choice of drive depends on whether your system is operated with a static or
a variable load profile. As the only full-liner in pump drive technology, KSB
has a broad product portfolio to choose from which covers every
requirement and demand.
The innovative drive technology of KSBs SuPremE motor is particularly
suitable for variable load profiles, as KSBs SuPremE motor achieves top
efficiency levels especially in the part-load range. Todays model already
exceeds the legal requirements of the ErP regulations for 2017.
Youre not sure about your systems load profile?
Gain a clear picture: KSBs PumpMeter monitoring unit makes pump
operation transparent. Or you can use the comprehensive consultancy
provided as part of our SES System Efficiency Services.
Read more about
our drive solutions at
www.ksb.com/fluidfuture-en/drives
Find out more:
www.ksb.com/fluidfuture-en/analysis
Individual drive solutions for your Eta pump
System analysis with FluidFuture
Identification of load profile
Static (mains operation) Variable (with frequency inverter)
IE4asynchronous
motor
IE3asynchronous
motor
IE2asynchronous
motor
IE2 with frequency inverter (with bypass
option)
KSB SuPremE synchronous
reluctance motor
Permanent magnet synchron-
ous drive (for glandless pumps)
t/t total
Q/Qopt
t/t total
Q/Qopt
12 Drive Solutions
The comprehensive Eta pump family offers a variety of high-performance products and coordinated system
solutions for applications in heating, cooling, water supply, waste water disposal, pressure boosting, fire fight-
ing and many more. Our systems expertise and our FluidFuture energy efficiency concept help us provide
you with the optimum pump solution for your specific requirements.
The whole world of Eta
Product Overview
Etabloc PumpDrive Close-coupled pump with motor-mounted variable speed system
DN 25 - 150Q [m3/h] max. 715H [m] max. 144p [bar] max. 16T [C] max. +140
Data for 60 Hz operation
Design: Close-coupled, single-stage volute casing pump, with ratings to EN 733, with replaceable shaft sleeve, casing wear rings and magnetless KSB SuPremE motor of effici-ency class IE4 (to IEC (CD) 60034-30 Ed.2) with PumpDrive variable speed system; pump shaft and motor shaft are rigidly connected.
Applications: Spray irrigation, irrigation, drainage and water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, handling of hot water, cooling water, fire-fighting water, seawater, oil, brine, drinking water, cleaning agents, brackish water, service water, etc.
Automation possible: PumpMeter can be used in 50/60 Hz applications
Etanorm PumpDrive Standardised pump with motor-mounted variable speed system
DN 25 - 150Q [m3/h] max. 740H [m] max. 160p [bar] max. 16T [C] max. +140
Data for 60 Hz operation
Design: Horizontal, long-coupled, single-stage volute casing pump in back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves, casing wear rings and magnetless KSB SuPremE motor of efficiency class IE4 (to IEC (CD) 60034-30 Ed. 2.) with PumpDrive variable speed system.
Applications: Spray irrigation, irrigation, drainage, district heating, water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, fire-fighting systems, handling of hot water, cooling water, fire-fighting water, oil, brine, drinking water, brackish water, service water, etc.
Automation possible: PumpMeter can be used in 50/60 Hz applications
Etaline PumpDrive In-line pump with motor-mounted variable speed system
DN 32 - 200Q [m3/h] max. 850H [m] max. 139p [bar] max. 16T [C] -10 to +110
Data for 60 Hz operation
Design: Single-stage volute casing pump in in-line design, with magnetless KSB SuPremE motor of efficiency class IE4 (to IEC (CD) 60034-30 Ed. 2.) and PumpDrive variable speed system; pump shaft and motor shaft are rigidly connected.
Applications: Hot water heating systems, cooling circuits, air-conditioning systems, water supply systems, service water supply systems and industrial recirculation systems.
Automation possible: PumpMeter, BOA-Systronic can be used in 50/60 Hz applications
Etaline Z PumpDrive In-line twin pump with motor-mounted variable speed system
DN 32 - 200Q [m3/h] single-pump operation max. 602 parallel operation max. 1095H [m] max. 38,5p [bar] max. 16T [C] -10 to +140
Data for 50 Hz operation
Design: Single-stage volute casing pump in in-line twin design, with magnetless KSB SuPremE motor of efficiency class IE4 (to IEC (CD) 60034-30 Ed.2) and PumpDrive variable speed system; pump shaft and motor shaft are rigidly connected. An M12 module (accessory) enables redundant operation of EtalineZ without a higher-level controller.
Applications: Hot water heating systems, cooling circuits, air-conditioning systems, water supply systems, service water supply systems and industrial recirculation systems.
Automation possible: PumpMeter, BOA-Systronic can be used in 50/60 Hz applications
13
Etanorm SYT / RSY* Hot water / thermal oil pump
DN 32 - 300Q [m3/h] max. 1900H [m] max. 102p [bar] max. 16T [C] max. +350
Data for 50 Hz operation
Design: Horizontal, single-stage, long-coupled volute casing pump in back pull-out design, ratings and main dimensions to EN 733, with replaceable casing wear rings. ATEX-compliant version available.
Applications: In heat transfer systems (DIN 4754, VDI 3033) or hot water recirculation (DIN 4752).
Automation possible: PumpDrive also available in 60 Hz
Etachrom BC PumpDrive* Close-coupled chrome steel pump with motor-mounted variable speed system
DN 25 - 80Q [m3/h] max. 184H [m] max. 107p [bar] max. 12T [C] max. +110
Data for 60 Hz operation
Design: Close-coupled, horizontal, single-stage annular casing pump, with ratings and main dimensions to EN 733, with replaceable casing wear rings and motor-mounted variable speed system.
Applications: Spray irrigation, irrigation, drainage and water supply systems, heating and air-conditioning systems, fire-fighting systems, condensate transport, swimming pools, handling of hot water, cooling water, fire-fighting water, oil, drinking water, cleaning agents, service water.
Automation possible: PumpMeter can be used in 50/60 Hz applications
Etabloc SYT / Etaline SYT* Hot water / thermal oil pump
DN 32 - 100Q [m3/h] max. 280H [m] max. 67p [bar] max. 16T [C] max. +350
Data for 50 Hz operation
Design: Horizontal, single-stage volute casing pump in back pull-out design, with ratings and main dimensions to EN 733, also in in-line design, with replaceable casing wear rings.
Applications: In heat transfer systems (DIN 4754) or for hot water circulation.
Automation possible: PumpDrive also available in 60 Hz
Etachrom NC PumpDrive* Standardised chrome steel pump with motor-mounted variable speed system
DN 25 - 80Q [m3/h] max. 212H [m] max. 105p [bar] max. 12T [C] max. +110
Data for 60 Hz operation
Design: Horizontal, single-stage annular casing pump, with ratings and main dimensions to EN 733, with replaceable casing wear rings and motor-mounted variable speed system.
Applications: Water supply, spray irrigation, irrigation and drainage systems, heating and air-conditioning systems, fire-fighting systems, handling of drinking water, service water, hot water, cooling water, swimming pool water, fire-fighting water, condensate, oil and cleaning agents.
Automation possible: PumpMeter can be used in 50/60 Hz applications
* Also available with new-generation PumpDrive and KSB SuPremE motor
Product Overview14
Etaseco / Etaseco-I Standardised water pump with canned motor
DN 32 - 100Q [m3/h] max. 250H [m] max. 162p [bar] max. 16T [C] max. +140
Data for 50 Hz operation
Design: Horizontal/vertical, seal-less volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, single-stage, single-entry, casing connecting dimensions to EN 733.
Applications: For handling aggressive, flammable, toxic, volatile, or valuable liquids in the chemical and petrochemical industries, in environmental and industrial engineering.
Automation possible: PumpMeter, PumpDrive also available in 60 Hz
Etaseco RVP Cooling circuit pump with canned motor
DN 32Q [m3/h] max. 20H [m] max. 25p [bar] max. 10T [C] max. +85
Design: Horizontal/vertical seal-less volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, single-stage, single-entry.
Applications: For handling toxic, volatile or valuable fluids in environmental and indus-trial engineering and for use as a coolant pump in cooling systems. Transport vehicles, environmental and industrial engineering; applications where low noise emission, smooth running or long service intervals are required.
Automation possible: PumpMeter, PumpDrive also available in 60 Hz
Etaprime L Self-priming pump (close-coupled model: B/BN) for clean or contaminated liquids
DN 25 - 125Q [m3/h] max. 180H [m] max. 85p [bar] max. 10T [C] max. +90
Data for 50 Hz operation
Design: Horizontal, self-priming volute casing pump in back pull-out design, single-stage, with open multi-vane impeller, long-coupled. ATEX-compliant version available. Close-coupled model with a common (B) or rigidly connected (BN) pump and motor shaft.
Applications: For handling clean, contaminated or aggressive liquids not containing abrasive substances and/or solids.
also available in 60 Hz
Etanorm GPV / CPV Vertical low-pressure pump
DN 32 - 150Q [m3/h] max. 660H [m] max. 102p [bar] max. 16T [C] max. +95
Data for 50 Hz operation
Design: Single-stage volute casing pump, with ratings to EN 733, for vertical installation in closed tanks under atmospheric pressure. Suitable for immersion depths of up to 2000 mm.
Applications: For handling neutral degreasing and phosphating solutions, wash water with degreasing agents, dipping paints, etc.
Automation possible: PumpDrive also available in 60 Hz
15
1210
.025
/ 02
-EN
/ 09
.14
/ K
SB A
kti
eng
esel
lsch
aft
2014
Su
bje
ct t
o t
ech
nic
al m
od
ific
atio
n w
ith
ou
t p
rio
r n
oti
ce.
KSB AktiengesellschaftJohann-Klein-Strasse 967227 Frankenthal (Germany) www.ksb.com
Technology that makes its mark
Your local KSB representative:
The KSB Newsletter dont miss out, sign up now:www.ksb.com/ksb-en/ newsletter