SMPower and speed at an economical size. A flexible machine perfect for tackling smaller, high-output work.

Minimal footprint, plenty of power.

SM Specifications

Tool Layout and Stroke

Front End Tool Detail Back End Tool Detail Sub-Spindle DetailY-1 Axis Detail

SM SpecificationsDescriptionMachineMax. rpmMax. Turning DiameterStrokeAdditional Positive BrakeRapid Traverse Rate

ToolingO.D ToolsFront Work ToolsCross Driven ToolsBack Work ToolsEccentricity Tools

NCSpecificationControllable AxesLCD

MotorMain SpindleSub-SpindleCross DrillBack EndServoCoolant

EtcCoolant Tank Capa.Lubrication Tank Capa.Center HeightWeight

toll free 888.344.3330 main 952.564.3290 fax 952.564.3293 sales@ksiswiss.com support@ksiswiss.com www.ksiswiss.com

SM 20 Main 10,000/Sub 8,000rpmØ20mm (0.787")260mm (10.236")1/1,000°32m/min

6EA5EA4EA4EA2EA

Fanuc 18iTB7 Axes10.4" MONO

2.2/3.7kW (3.0/5.0hp)1.5/2.2kW (2.0/3.0hp)0.55/1.1kW (0.7/1.5hp)1.0kW (1.3hp)1.0kW (1.3hp)0.75kW (1.0hp)

200L (52.834 gal)1.8L (0.475 gal)1,000mm (39.259")2,800kg (8,377 lbs)

Specs subject to change without notice.

Standard units

Synchronous rotary guide bush holder unit4 live cross tools4 live back end tools3 live front end toolsAir blow on sub-spindleProduct Parts conveyorCentralized lubricating systemSafety door lockAutomatic sources of electricity circuit breakerSelf-examination systemChip box, standard tools and tool boxRigid tapping on all toolsAll Fanuc electronics and motorsFull C-axis main and sub-spindleY-axis tool blockDual pump coolant system

Optional units

Bar feeder5 live cross toolsChip conveyorAir blow by m codeHigh pressure coolant pumpBroaching holders

Description

Standard Fanuc specificationAll axis rigid tappingHand trace functionDrill cycling functionCutter compensationBacklash, pitch error compensationProgram check by MPGFull C-axis main and sub-spindle2-year Fanuc warrantyOff-center milling all sides

Control specificationSM 20