Date post: | 08-Mar-2016 |
Category: |
Documents |
Upload: | source-media |
View: | 217 times |
Download: | 0 times |
SQCThe heaviest, most feature-packed Swiss-type in its class. Easier access to tool layout facilitates quick set-up and tool changes.
The only thing more impressive than its brain, is its brawn.
SQC Specifications
Tool Layout and Stroke
Front End Tool Detail Back End Tool Detail Sub-Spindle DetailToggle System Detail
SQC Specifications
toll free 888.344.3330 main 952.564.3290 fax 952.564.3293 [email protected] [email protected] www.ksiswiss.comSpecs subject to change without notice.
DescriptionMachineMax. rpmMax. Turning DiameterStrokeAdditional Positive BrakeRapid Traverse Rate
ToolingO.D ToolsFront Work ToolsCross Driven ToolsBack Work ToolsEccentricity Tools
NCSpecificationControllable AxesLCD
MotorMain SpindleSub-SpindleCross DrillBack EndServoCoolant
EtcCoolant Tank Capa.Lubrication Tank Capa.Center HeightWeight
SQC-32 | 38 Main 8,000/Sub 8,000rpmØ32mm (1.259") | Ø38mm (1.496")210mm (8.267")1/1,000°32m/min
6EA5EA4EA4EA3EA
Fanuc 18iTB7 Axes10.4" MONO
2.2/3.7kW (3.0/5.0hp) | 5.5/7.5kW (7.4/10.1hp)1.5/2.2kW (2.0/3.0hp)0.55/1.1kW (0.7/1.5hp)1.0kW (1.5hp)1.0kW (1.5hp)0.9kW (1.2hp)
200L (52.834 gal)1.8L (0.475 gal)1,000mm (39.259")3,800kg (8,377 lbs) | 4,100kg (9,038 lbs)
Standard units
Synchronous rotary guide bush holder unit4 live cross tools4 live back end tools3 live front end toolsAir blow on sub-spindleProduct Parts conveyorCentralized lubricating systemParts ejectorSafety door lockSelf-examination systemChip box, standard tools and tool boxRigid tapping on all toolsAll Fanuc electronics and motorsFull C-axis main and sub-spindleY-axis tool blockDual pump coolant system
Optional units
Bar feeder5 live cross toolsChip conveyorAir blow by m codeHigh pressure coolant pump
Description
Standard Fanuc specificationAll axis rigid tappingHand trace functionDrill cycling functionCutter compensationBacklash, pitch error compensationProgram check by MPGFull C-axis main and sub-spindle2-year Fanuc warrantyOff-center milling all sides
Control specificationSQC 32 SQC 38