Kubix Specification Guide

1

Kubix Product Specifi cation GuideKitchens for Living

Kubix

The Symphony Group Plc

Pen Hill Estate,

Park Spring Road, Barnsley

South Yorkshire, S72 7EZ

Tel: 01226 446000

Fax: 01226 711185

www.symphony-group.co.uk

In keeping with our policy of continuous product development, we reserve the right

to change colours, designs, materials, descriptions or methods of manufacture. Such

changes may be made without notice and without incurring any liability. Nothing

in this publication should be considered to be part of any contract. The illustrations

included in this publication are to indicate general format and are not necessarily

correctly scaled, proportioned or detailed.

Natural wood is used in some of our kitchens. As a natural material, wood refl ects

the endless variety of grains and textures found in nature and such variances can be

expected in any selection of timber fronted units. Timbers mellow when exposed to

sunlight, so a colour change can be expected.

PVC laminates and melamine fi nishes are also subject to slight colour change over

a period of years. Unless specifi ed otherwise, the expression ‘solid timber’ refers to

door and drawer fronts only. A copy of our conditions of sale is available on request.

Errors and omissions excepted.

Copyright and all other rights in this brochure and the photographs and other works

upon which it is based, are owned by The Symphony Group PLC. No part of the

brochure and said photographs and other works may be reproduced or transmitted

in any form or by any means (including but not limited to photocopying or storing

in any electronic medium) without the prior express written permission of The

Symphony Group PLC.

© The Symphony Group Plc 2012

Ref. KUSPECMAY12

When you have fi nished with this brochure please recycle it

Creating the perfect living space

114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 40-1 10/05/2012 11:08

2 3

CONTENTS

General Information 4-5

15mm High Performance Vista Cabinets and

15mm Moisture Resistant Vista Cabinets 6-7

18mm Excel Cabinets 8-9

18mm Esprit Cabinets 10-11

Esprit Planning and Installation 12-13

Adjustment and Fixing - Manual 14

Adjustment and Fixing - Electronic 15

Product Availability Matrix 16-17

Usage Guidance and Ordering Checklist 17

Vista and Excel Base Units 18

Vista and Excel Sink and Hob Units 18-19

Vista and Excel Corner Base Units 19

Vista and Excel Wall Units 20

Vista and Excel Corner Wall Units 21

Vista and Excel Appliance Housing 22

Vista and Excel Integrated Housing 22

Vista and Excel Broom Units 22

Vista and Excel Larder Units 22

Vista and Excel Over Cooker Hood Units 23

Vista and Excel Boiler Housings 23

Vista and Excel Ready For Assembly 24-25

Esprit Range Content 26-27

Back, End, Filler and Blender Panels 28

Cornice and Pelmet 28

Corner Posts 28

Accessories 29

Esprit Accessories 30

Lighting 31

Worktops 32-33

Performance Testing/Green Credentials 34

Care and Attention 35

One in four community and private

homes throughout the UK is fi tted

with a Symphony product, which is

testament to our extensive knowledge

of the market and the 40 years

experience we have in providing

premium products and solutions.

All dimensions in the specifi cation document are in millimetres.

INTRODUCTION

Kubix Product Specifi cation Guide

Kitchens for Living

We are the largest privately owned fi tted furniture supplier in the UK today. Our place as market leader, our

large product portfolio, our extensive menu of services, our award winning Extranet facility, as well as our

long standing commitment to service and quality make Symphony the number one choice for community

housing projects.

Our outstanding single source service covers all aspects of project management from fi rst contact through to

fi nal delivery. Symphony supplies nationally and we pride ourselves in supporting our quality products with

renowned design, technical expertise and management guidance locally. “Supply Nationally. Support Locally”

is therefore our commitment and promise to all our clients/customers and partnerships.

Symphony maintains a rigorously high standard at all levels. From design to production methods, we provide

quality kitchens which are built to last, each one conforming to the high standards of our quality assurance

programme. This has earned Symphony a range of industry recognised standards, including the FIRA Gold Award.

Choice and fl exibility are key and we are continually expanding our range to provide even greater scope for

meeting our clients’ and customers’ design and capacity requirements. We are dedicated to providing you with

premium products in compliance with market requirements.

Symphony has a culture of being green, it is embedded in all our business practices. We maintain a responsible

attitude to the environment and sustainability issues and our overriding approach is driven by an understanding

of the impact of our activities on future generations.

DESIGN


2 3

CONTENTS

General Information 4-5

15mm High Performance Vista Cabinets and

15mm Moisture Resistant Vista Cabinets 6-7

18mm Excel Cabinets 8-9

18mm Esprit Cabinets 10-11

Esprit Planning and Installation 12-13

Adjustment and Fixing - Manual 14

Adjustment and Fixing - Electronic 15

Product Availability Matrix 16-17

Usage Guidance and Ordering Checklist 17

Vista and Excel Base Units 18

Vista and Excel Sink and Hob Units 18-19

Vista and Excel Corner Base Units 19

Vista and Excel Wall Units 20

Vista and Excel Corner Wall Units 21

Vista and Excel Appliance Housing 22

Vista and Excel Integrated Housing 22

Vista and Excel Broom Units 22

Vista and Excel Larder Units 22

Vista and Excel Over Cooker Hood Units 23

Vista and Excel Boiler Housings 23

Vista and Excel Ready For Assembly 24-25

Esprit Range Content 26-27

Back, End, Filler and Blender Panels 28

Cornice and Pelmet 28

Corner Posts 28

Accessories 29

Esprit Accessories 30

Lighting 31

Worktops 32-33

Performance Testing/Green Credentials 34

Care and Attention 35

One in four community and private

homes throughout the UK is fi tted

with a Symphony product, which is

testament to our extensive knowledge

of the market and the 40 years

experience we have in providing

premium products and solutions.

All dimensions in the specifi cation document are in millimetres.

INTRODUCTION

Kubix Product Specifi cation Guide

Kitchens for Living

We are the largest privately owned fi tted furniture supplier in the UK today. Our place as market leader, our

large product portfolio, our extensive menu of services, our award winning Extranet facility, as well as our

long standing commitment to service and quality make Symphony the number one choice for community

housing projects.

Our outstanding single source service covers all aspects of project management from fi rst contact through to

fi nal delivery. Symphony supplies nationally and we pride ourselves in supporting our quality products with

renowned design, technical expertise and management guidance locally. “Supply Nationally. Support Locally”

is therefore our commitment and promise to all our clients/customers and partnerships.

Symphony maintains a rigorously high standard at all levels. From design to production methods, we provide

quality kitchens which are built to last, each one conforming to the high standards of our quality assurance

programme. This has earned Symphony a range of industry recognised standards, including the FIRA Gold Award.

Choice and fl exibility are key and we are continually expanding our range to provide even greater scope for

meeting our clients’ and customers’ design and capacity requirements. We are dedicated to providing you with

premium products in compliance with market requirements.

Symphony has a culture of being green, it is embedded in all our business practices. We maintain a responsible

attitude to the environment and sustainability issues and our overriding approach is driven by an understanding

of the impact of our activities on future generations.

DESIGN


4 5

GENERAL INFORMATION

CABINETS

Kubix’s rigid cabinet range has been tested

to and complies with the requirements of

BS 6222 Part 2 Level H.

18MM EXCEL & 18MM ESPRIT

Side panels, bases, shelves and rails are

manufactured from 18mm high density

melamine faced chipboard. Plinths are

manufactured from 15mm chipboard.

All vulnerable cabinet edges are lipped

with melamine paper bonded with

machine applied hot melt adhesive to

deter moisture seepage. All chipboard

used in manufacture complies with

BS EN-312-P2. Most 18mm cabinets are

supplied on adjustable legs.

15MM HIGH PERFORMANCE VISTA

Side panels, bases, shelves and plinths are


melamine faced chipboard. (All rails are

manufactured from White MDF). Plinths

are manufactured from 15mm chipboard.



machine applied hot melt adhesive to deter

moisture seepage. All chipboard used in

manufacture complies with

BS EN-312-P2. All 15mm cabinets are


15MM MOISTURE RESISTANT VISTA

Cabinet ends, shelf, base and plinth

components are manufactured from

high density, fi ne surface 15mm coreboard

to BS EN 312-P3, giving improved

moisture resistance.

BACKS

All units have inset hardboard fi tted backs

as standard. All corner units have fi tted

blanking panels. Backs are inset by 66mm

on 600mm deep modules to allow

services to run behind (15mm on 500mm

deep modules).

IN-SITU REPAIRABILITY

Easily removable end and back panels

facilitate fast, effi cient repairability in-situ.

Hinge repair plates are also available. Please

ask your Symphony representative for

samples and information.

DRAWER SYSTEM - 15MM VISTA AND

18MM EXCEL

The 3 metal sided drawer box system

incorporates a 15mm chipboard bottom.

Drawer sides are enamel coated for high

abrasion resistance. The smooth action,

metal roller system, featuring parallel

guides and built-in drawer stop, has

been independently tested by FIRA and

successfully meets the requirements of

BS 6222 Part 2 Level H. Drawer fronts are

adjustable horizontally and vertically.

DRAWER SYSTEM - 18MM ESPRIT

18mm Esprit has a 16mm chipboard

base and quadro runners. The system has



BS 6222 Part 2 Level H. The drawer box

is fully extendable and has soft close

pneumatic action.

LOCKABLE UNITS

Fully lockable single units - base and

wall - are available. Please see pages

18 and 21 for order codes or ask your

Symphony representative for information.

READY FOR ASSEMBLY

A wide range of base and wall units

and colour options are available in ready

for assembly format for ease of storage

and quick, easy assembly on site. Please


information.

HINGES

On both 15mm Vista, 18mm Excel and

18mm Esprit, hinges are 170° opening

as standard. 110° opening hinges are

an option. The all metal, 110° and 170°

hinges comply fully with BS 6222 Part 2

Level H, allowing full alignment.

METAL FITTINGS

All metal fi ttings and screws used in

manufacture are plated.

WIREWORK

All wirework used in the ranges is chrome,

for a tough hygienic fi nish.

PLINTHS

Plinths are front fi xed to allow easy access

to services and for cleaning under units.

SINKTOPS

Sinktops are offered in a comprehensive

selection of materials, sizes, styles and

colours. The full sink and tap offer is

specifi ed in our separate sink and tap

brochure.

WORKTOPS

Worktops are FIRA Gold Award certifi ed,

constructed from laminate bonded to

chipboard and are available in 28mm and

38mm bullnose styles. Front edges have

an application of wax for extra protection

against water ingress. Back edges are

sealed by wax injection. Refer to page 34

for details. Moisture resistant worktops, to

BS EN 312-P3 specifi cation, are available in

a range of colours.

SHELF SUPPORTS

On 15mm Vista shelves are supported

on plastic injection moulded shelf clips.

In addition, all units over 600mm in

length have central supports. 18mm Excel

and 18mm Esprit units have metal shelf

supports.

HANDINGS

Many units are described as left or right

handed. Handings should be expressed as

if looking at the unit from the front. Ready

for assembly units can be used as both left

and right handed.

Handings required are:

The side of the hinge on single units

(e.g. left hand hinged)

The side of the blanked end of corner units

(e.g. left hand blanked)

The position of the drainer on sink units

(e.g. left hand drainer)

The side of a dummy drawer on a double

base unit (e.g. left hand side)

LEGS

To provide easy installation, adjustable legs

are included (allowing adjustment from

140mm to 175mm) on both 15mm Vista

and 18mm Excel.

SOFTPLUS

SoftPlus is a soft close system available

as an optional extra on both 15mm Vista

and 18mm Excel. SoftPlus is available with

a soft close drawer system and soft close

hinges.

UNIT CODES

Kubix’s unit codes consist of two or three

letters, followed by a series of numbers. In

some cases one or two letters may follow

the numbers.

PREFIX LETTERS

These indicate the type of unit, such

as BU for base unit; WU for wall unit;

BR for broom unit; and so on.

NUMBERS

The numbers indicate the width of the

unit followed either by the depth, or in

case of wall units, the height. For example

a WU1056 is a wall unit 1000mm wide

and 561mm high. A BU56 is a base unit

500mm wide and 600mm deep.

SUFFIX LETTERS

Any letters following the number code

indicate a variant of the type as follows:

A

B

C

D

E

F - Full height door base unit.

D - Drawer line base unit (units

will be supplied drawer line

unless specified otherwise).

LK - Lockable units.

UNIT DIMENSIONS

All dimensions are expressed in millimetres

as shown.

CORNER BASE UNITS

All corner base units have centre hung

doors with 110° hinges on 15mm Vista,

18mm Excel and 18mm Esprit. Corner

posts and blanking panels are fi tted as

standard. On corner base units with a

corner post, a white blanking panel covers

the void of the unit. A 600mm colour

co-ordinated blanking panel is fi tted where

corner posts are NOT required – e.g. when

the blank abuts a void for a freestanding

appliance or tray space.

IMPORTANT: Please specify the handing

of the side of the blanking panel when

ordering.

CORNER POST

The corner post allows product ranges with

protruding handles to be offset by 30mm

in order to avoid possible clashing of

drawer handles in a corner. The corner post

automatically spaces out the units to the

correct size across Dimension A. However

the fi tter must remember to position the

corner unit (as appropriate) from the wall.

(See page 28).

ROLL EDGE SINKTOPS IN CORNERS

Should it be necessary to position a roll

edge sinktop in a corner with a corner

post, then the worktops should be

increased in size to allow for the 30mm

extension. If using postformed worktops,

then two worktops are required as

illustrated on the right.

Please note that worktop B cannot run into

the corner as this would result in a 30mm

gap between it and the sinktop.

NB: Sit-on sinktops are only available

for use with 30mm worktops.

L-SHAPE CORNER BASE UNITS

A corner unit with either a shelf or a

revolving carousel. The two doors are

hinged on the end panels and open to

170°. In order to facilitate transportation,

the unit is supplied in two halves and the

carousel or shelf must be fi tted on site. Full

height door or door and dummy drawer

front styles are available.

The dummy drawer fronts are fi xed

to the doors.

CORNER SINK BASE UNITS

1000mm and 1200mm corner base units

can also be supplied as corner sink units.

To specify a corner sink unit, change the

prefi x letters on the standard corner base

unit code from ‘CB’ to ‘CS’ as shown in

the example.

CORNER BASE UNITS VARIATIONS

To specify a corner base or corner sink

unit with a manufacturing variation,

suffi x the standard unit code as shown in

the examples.

GENERAL INFORMATION

NB: When designing or

Corner Base Unit

(1000mm)

specifying for a kitchen,

allowance must be made for

the 30mm extension, both i

Depth ofWorktop(500mm/600mm)


CornerPost

ReturnUnit

Dim

en

sio

n A

(530

mm

/6

30m

m)

n

the unit positioning and the

sizes of the worktops.

Space out from return wall

Unit Code Description

CS106DCCorner sink unit

1000 x 600 x 870, 600 door

Variation Suffi x Unit Code Description

No corner post

BO CB106DCBO

Corner base unit 1000 x 600 x 870.

600 door,no corner post

Dummy drawer

DD CB106DADD


500 door,dummy drawer

No corner post and dummy drawer

BS CB106DABS

Corner sink unit 1000 x 600 x 870.

500 door, no cornerpost, dummy drawer

Worktop A

Worktop B

Plu

s 30

mm

530mm or630mm

MR

HP

Variations of corner base

unit or appliance housing

formats


4 5

GENERAL INFORMATION

CABINETS

Kubix’s rigid cabinet range has been tested

to and complies with the requirements of

BS 6222 Part 2 Level H.

18MM EXCEL & 18MM ESPRIT



melamine faced chipboard. Plinths are

manufactured from 15mm chipboard.



machine applied hot melt adhesive to

deter moisture seepage. All chipboard

used in manufacture complies with

BS EN-312-P2. Most 18mm cabinets are


15MM HIGH PERFORMANCE VISTA

Side panels, bases, shelves and plinths are


melamine faced chipboard. (All rails are

manufactured from White MDF). Plinths

are manufactured from 15mm chipboard.



machine applied hot melt adhesive to deter

moisture seepage. All chipboard used in

manufacture complies with

BS EN-312-P2. All 15mm cabinets are


15MM MOISTURE RESISTANT VISTA

Cabinet ends, shelf, base and plinth

components are manufactured from

high density, fi ne surface 15mm coreboard

to BS EN 312-P3, giving improved

moisture resistance.

BACKS


as standard. All corner units have fi tted

blanking panels. Backs are inset by 66mm

on 600mm deep modules to allow

services to run behind (15mm on 500mm

deep modules).

IN-SITU REPAIRABILITY

Easily removable end and back panels

facilitate fast, effi cient repairability in-situ.

Hinge repair plates are also available. Please


samples and information.

DRAWER SYSTEM - 15MM VISTA AND

18MM EXCEL

The 3 metal sided drawer box system

incorporates a 15mm chipboard bottom.

Drawer sides are enamel coated for high

abrasion resistance. The smooth action,

metal roller system, featuring parallel

guides and built-in drawer stop, has



BS 6222 Part 2 Level H. Drawer fronts are

adjustable horizontally and vertically.

DRAWER SYSTEM - 18MM ESPRIT

18mm Esprit has a 16mm chipboard

base and quadro runners. The system has





pneumatic action.

LOCKABLE UNITS

Fully lockable single units - base and

wall - are available. Please see pages

18 and 21 for order codes or ask your

Symphony representative for information.

READY FOR ASSEMBLY

A wide range of base and wall units

and colour options are available in ready

for assembly format for ease of storage

and quick, easy assembly on site. Please


information.

HINGES

On both 15mm Vista, 18mm Excel and

18mm Esprit, hinges are 170° opening

as standard. 110° opening hinges are

an option. The all metal, 110° and 170°

hinges comply fully with BS 6222 Part 2

Level H, allowing full alignment.

METAL FITTINGS



WIREWORK

All wirework used in the ranges is chrome,

for a tough hygienic fi nish.

PLINTHS

Plinths are front fi xed to allow easy access

to services and for cleaning under units.

SINKTOPS

Sinktops are offered in a comprehensive

selection of materials, sizes, styles and

colours. The full sink and tap offer is

specifi ed in our separate sink and tap

brochure.

WORKTOPS



chipboard and are available in 28mm and

38mm bullnose styles. Front edges have

an application of wax for extra protection

against water ingress. Back edges are

sealed by wax injection. Refer to page 34

for details. Moisture resistant worktops, to

BS EN 312-P3 specifi cation, are available in

a range of colours.

SHELF SUPPORTS

On 15mm Vista shelves are supported

on plastic injection moulded shelf clips.

In addition, all units over 600mm in

length have central supports. 18mm Excel

and 18mm Esprit units have metal shelf

supports.

HANDINGS



if looking at the unit from the front. Ready

for assembly units can be used as both left

and right handed.

Handings required are:

The side of the hinge on single units

(e.g. left hand hinged)

The side of the blanked end of corner units

(e.g. left hand blanked)

The position of the drainer on sink units

(e.g. left hand drainer)

The side of a dummy drawer on a double

base unit (e.g. left hand side)

LEGS

To provide easy installation, adjustable legs

are included (allowing adjustment from

140mm to 175mm) on both 15mm Vista

and 18mm Excel.

SOFTPLUS


as an optional extra on both 15mm Vista

and 18mm Excel. SoftPlus is available with

a soft close drawer system and soft close

hinges.

UNIT CODES

Kubix’s unit codes consist of two or three

letters, followed by a series of numbers. In

some cases one or two letters may follow

the numbers.

PREFIX LETTERS

These indicate the type of unit, such

as BU for base unit; WU for wall unit;

BR for broom unit; and so on.

NUMBERS

The numbers indicate the width of the

unit followed either by the depth, or in

case of wall units, the height. For example

a WU1056 is a wall unit 1000mm wide

and 561mm high. A BU56 is a base unit

500mm wide and 600mm deep.

SUFFIX LETTERS

Any letters following the number code

indicate a variant of the type as follows:

A

B

C

D

E

F - Full height door base unit.

D - Drawer line base unit (units

will be supplied drawer line

unless specified otherwise).

LK - Lockable units.

UNIT DIMENSIONS


as shown.

CORNER BASE UNITS

All corner base units have centre hung

doors with 110° hinges on 15mm Vista,

18mm Excel and 18mm Esprit. Corner

posts and blanking panels are fi tted as

standard. On corner base units with a

corner post, a white blanking panel covers

the void of the unit. A 600mm colour

co-ordinated blanking panel is fi tted where

corner posts are NOT required – e.g. when

the blank abuts a void for a freestanding

appliance or tray space.

IMPORTANT: Please specify the handing

of the side of the blanking panel when

ordering.

CORNER POST

The corner post allows product ranges with

protruding handles to be offset by 30mm

in order to avoid possible clashing of

drawer handles in a corner. The corner post

automatically spaces out the units to the

correct size across Dimension A. However

the fi tter must remember to position the

corner unit (as appropriate) from the wall.

(See page 28).

ROLL EDGE SINKTOPS IN CORNERS

Should it be necessary to position a roll

edge sinktop in a corner with a corner

post, then the worktops should be

increased in size to allow for the 30mm

extension. If using postformed worktops,

then two worktops are required as

illustrated on the right.

Please note that worktop B cannot run into

the corner as this would result in a 30mm

gap between it and the sinktop.

NB: Sit-on sinktops are only available

for use with 30mm worktops.

L-SHAPE CORNER BASE UNITS

A corner unit with either a shelf or a

revolving carousel. The two doors are

hinged on the end panels and open to

170°. In order to facilitate transportation,

the unit is supplied in two halves and the

carousel or shelf must be fi tted on site. Full

height door or door and dummy drawer

front styles are available.

The dummy drawer fronts are fi xed

to the doors.

CORNER SINK BASE UNITS

1000mm and 1200mm corner base units

can also be supplied as corner sink units.

To specify a corner sink unit, change the

prefi x letters on the standard corner base

unit code from ‘CB’ to ‘CS’ as shown in

the example.

CORNER BASE UNITS VARIATIONS

To specify a corner base or corner sink

unit with a manufacturing variation,

suffi x the standard unit code as shown in

the examples.

GENERAL INFORMATION

NB: When designing or

Corner Base Unit

(1000mm)

specifying for a kitchen,

allowance must be made for

the 30mm extension, both i



CornerPost

ReturnUnit

Dim

en

sio

n A

(530

mm

/6

30m

m)

n

the unit positioning and the

sizes of the worktops.

Space out from return wall

Unit Code Description

CS106DCCorner sink unit

1000 x 600 x 870, 600 door

Variation Suffi x Unit Code Description

No corner post

BO CB106DCBO


600 door,no corner post

Dummy drawer

DD CB106DADD


500 door,dummy drawer

No corner post and dummy drawer

BS CB106DABS

Corner sink unit 1000 x 600 x 870.

500 door, no cornerpost, dummy drawer

Worktop A

Worktop B

Plu

s 30

mm

530mm or630mm

MR

HP

Variations of corner base

unit or appliance housing

formats


76

UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200

BASE UNITS 500 deep 0.08 0.11 - 0.14 0.17 0.25 0.28 0.31 0.37

600 deep 0.10 0.13 0.14 0.16 0.20 0.27 0.30 0.34 0.41

WALL UNITS 561 high 0.04 0.05 0.06 0.06 0.08 0.11 0.12 0.13 -

724 high 0.05 0.07 0.08 0.09 0.11 0.15 0.17 0.18 -

900 high 0.06 0.08 0.09 0.10 0.13 0.17 0.19 0.22 -

BROOM LARDER

(2100MM)

500 deep 0.23 - - 0.41 0.45 - - - -

600 deep 0.25 - - 0.44 0.52 - - - -

BROOM LARDER

(2276MM)

500 deep - - - 0.43 0.52 - - - -

600 deep 0.30 - - 0.48 0.63 - - - -

ANGLE CORNER

WALL UNITS

561 high - - - - 0.11 - - - -

724 high - - - - 0.14 - - -

900 high - - - - 0.18 - - - -

OVER COOKER

HOOD UNITS

300 high - - - - 0.04 - - - -

TALL APPLIANCE

HOUSING

2100 high - - - - 0.55 - - - -

2276 high - - - - 0.59 - - - -

CUBIC CAPACITIES (M³) 15MM CABINETS

15MM HIGH PERFORMANCE VISTA CABINETS AND 15MM MOISTURE RESISTANT VISTA CABINETS

15MM HIGH PERFORMANCEVISTA CABINETS

Cabinets are produced from 15mm

melamine faced, high density, fi ne

surface particle board to comply with

BS EN 312-P2. To deter moisture seepage in

to the panels, all exposed edges are lipped

with melamine tape, bonded with machine

applied, hot melt adhesive. Symphony’s

rigid cabinets have been tested to comply

with the requirements of BS 6222 Part 2

Level H. 15mm high performance cabinets

come in a range of colours to the exterior

and lipping and have a white interior.

15MM MOISTURE RESISTANT VISTA CABINETS

High density, fi ne surface 15mm coreboard

to BS EN 312-P3, is used to produce all

cabinet sides, shelves, bases and plinths,

providing improved moisture resistance.

All exposed edges are lipped to prevent

water penetration. Service life is maximised

and maintenance costs reduced by the

enhanced material specifi cation. 15mm

moisture resistant cabinets are available

with a white exterior and interior.

BACKS

To allow services to run behind the units

inset hardboard fi tted backs come as standard.

Backs for 600mm deep modules are inset

by 66mm and 500mm units by 15mm.

FRONTALS

Designed to endure the most demanding

conditions, frontals can be removed and

replaced easily.

DRAWER SYSTEM

The drawer box consists of two metal

sides,a metal back and a 15mm chipboard

base. For high abrasion resistance the metal

sides are coated in enamel. The smooth

action, metal roller system, featuring

parallel guides and built-in drawer stop,

has been independently tested by FIRA and

successfully meets the requirements of BS

6222 Part 2 Level H. Drawer fronts can be

adjusted horizontally and vertically.

SOFTPLUS


as an optional extra on 15mm Vista High

Performance and Moisture Resistant

cabinets. SoftPlus is available with a soft

close drawer system and soft close hinges.

HINGES

All metal hinges with three way adjustment

that open to 170° come as standard.

Hinges that open to 110° are an optional

extra. Full alignment can be achieved with

Symphony’s 110° and 170° all metal hinges

which comply fully with BS 6222 Part 2

Level H.

METAL FITTINGS AND WIREWORK

All metal fi ttings and screws are plated.

The wirework provides a tough,

hygienic fi nish.

PLINTHS

To allow easy access to services and for

cleaning, plinths are front fi xed.

SHELF SUPPORTS

Plastic, injection moulded clips are used

to support shelves. A central support is

supplied for all units over 600mm long.

LEGS

Adjustable legs are included (allowing

adjustment from 140mm to 175mm)

enabling easy installation.

LOCKABLE UNITS

For added security lockable base and wall

units are available for a limited door offer.

Locks can be ordered separately. See page 29.

CONSTRUCTION

Cam and dowel construction is used to produce the cabinets which provides optimum rigidity.

HP

MR

- High Performance

- Moisture Resistant

3

2

7

4

15

6

8

9

12

13

11

10

MR

HP

15MM VISTA CABINETS

Fully adjustable drawer front for full alignment

66mm void to rear providing easy installation

around pipework and plumbing

Removable hardboard back allows easy access

should a problem arise after installation

15mm RAL 9001 faced chipboard

drawer base

Durable 3 metal sided Supra drawer box

with self-closing action (available with

SoftPlus drawer box upgrade)

3-way fully adjustable all metal hinge 170° (or

110° option) for full alignment (available with

SoftPlus hinge upgrade).

15mm cabinet - BS EN 312-P2,

to BS EN 312 - P3

Internal cabinet fi nished in white with choice

of external cabinet colours

Cabinet lipped all round to prevent

water ingress

Continuous plinth

Optional plinth dust seal

Adjustable legs provide easy installation

(min. 140mm - max. 175mm)

Cam and dowel construction for extra rigidity

1

75

6

4

3

2

8

* All dimensions in millimetres.

15MM VISTA WALL UNIT SPECIFICATION

3-way fully adjustable all-metal

hinge - 170° (or 110° option) for full

alignment (available with SoftPlus

hinge upgrade)

3 wall unit heights

561mm/724mm/900mm

15mm cabinet - to BS EN 312-P2,

to BS EN 312-P3

Hardboard back with horizontal

fi xing rail

Under shelf support for strength

Internal cabinet fi nished in white with

choice of external cabinet colours

15mm shelving with plastic shelf

support (one shelf 561mm and 724mm

high, two shelves 900mm high)

Co-ordinated front edge lipping to

match external cabinet fi nish

1

2

3

4

5

6

7

8

15MM VISTA BASE UNIT SPECIFICATION

1

2

3

4

5

6

7

8

9

10

11

12

13

Vista Back RailShelf Bracket

Worktop Fixing Bracket

Drawer RunnersRail Fixing

Cam & DowelWall Fixing Bracket

Leg

Drawer Box

SoftPlus 110° Hinge


MR

MR


76

UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200

BASE UNITS 500 deep 0.08 0.11 - 0.14 0.17 0.25 0.28 0.31 0.37

600 deep 0.10 0.13 0.14 0.16 0.20 0.27 0.30 0.34 0.41

WALL UNITS 561 high 0.04 0.05 0.06 0.06 0.08 0.11 0.12 0.13 -

724 high 0.05 0.07 0.08 0.09 0.11 0.15 0.17 0.18 -

900 high 0.06 0.08 0.09 0.10 0.13 0.17 0.19 0.22 -

BROOM LARDER

(2100MM)

500 deep 0.23 - - 0.41 0.45 - - - -

600 deep 0.25 - - 0.44 0.52 - - - -

BROOM LARDER

(2276MM)

500 deep - - - 0.43 0.52 - - - -

600 deep 0.30 - - 0.48 0.63 - - - -

ANGLE CORNER

WALL UNITS

561 high - - - - 0.11 - - - -

724 high - - - - 0.14 - - -

900 high - - - - 0.18 - - - -

OVER COOKER

HOOD UNITS

300 high - - - - 0.04 - - - -

TALL APPLIANCE

HOUSING

2100 high - - - - 0.55 - - - -

2276 high - - - - 0.59 - - - -


15MM HIGH PERFORMANCE VISTA CABINETS AND 15MM MOISTURE RESISTANT VISTA CABINETS

15MM HIGH PERFORMANCEVISTA CABINETS

Cabinets are produced from 15mm

melamine faced, high density, fi ne

surface particle board to comply with

BS EN 312-P2. To deter moisture seepage in

to the panels, all exposed edges are lipped

with melamine tape, bonded with machine

applied, hot melt adhesive. Symphony’s

rigid cabinets have been tested to comply

with the requirements of BS 6222 Part 2

Level H. 15mm high performance cabinets

come in a range of colours to the exterior

and lipping and have a white interior.

15MM MOISTURE RESISTANT VISTA CABINETS

High density, fi ne surface 15mm coreboard

to BS EN 312-P3, is used to produce all

cabinet sides, shelves, bases and plinths,

providing improved moisture resistance.

All exposed edges are lipped to prevent

water penetration. Service life is maximised

and maintenance costs reduced by the

enhanced material specifi cation. 15mm

moisture resistant cabinets are available

with a white exterior and interior.

BACKS

To allow services to run behind the units

inset hardboard fi tted backs come as standard.

Backs for 600mm deep modules are inset

by 66mm and 500mm units by 15mm.

FRONTALS



replaced easily.

DRAWER SYSTEM

The drawer box consists of two metal

sides,a metal back and a 15mm chipboard

base. For high abrasion resistance the metal


action, metal roller system, featuring



successfully meets the requirements of BS

6222 Part 2 Level H. Drawer fronts can be

adjusted horizontally and vertically.

SOFTPLUS


as an optional extra on 15mm Vista High

Performance and Moisture Resistant

cabinets. SoftPlus is available with a soft

close drawer system and soft close hinges.

HINGES

All metal hinges with three way adjustment

that open to 170° come as standard.

Hinges that open to 110° are an optional

extra. Full alignment can be achieved with



Level H.




hygienic fi nish.

PLINTHS



SHELF SUPPORTS

Plastic, injection moulded clips are used

to support shelves. A central support is

supplied for all units over 600mm long.

LEGS




LOCKABLE UNITS



Locks can be ordered separately. See page 29.

CONSTRUCTION

Cam and dowel construction is used to produce the cabinets which provides optimum rigidity.

HP

MR

- High Performance

- Moisture Resistant

3

2

7

4

15

6

8

9

12

13

11

10

MR

HP

15MM VISTA CABINETS

Fully adjustable drawer front for full alignment

66mm void to rear providing easy installation

around pipework and plumbing

Removable hardboard back allows easy access

should a problem arise after installation

15mm RAL 9001 faced chipboard

drawer base




3-way fully adjustable all metal hinge 170° (or

110° option) for full alignment (available with

SoftPlus hinge upgrade).

15mm cabinet - BS EN 312-P2,

to BS EN 312 - P3

Internal cabinet fi nished in white with choice

of external cabinet colours

Cabinet lipped all round to prevent

water ingress

Continuous plinth




Cam and dowel construction for extra rigidity

1

75

6

4

3

2

8


15MM VISTA WALL UNIT SPECIFICATION

3-way fully adjustable all-metal

hinge - 170° (or 110° option) for full

alignment (available with SoftPlus

hinge upgrade)

3 wall unit heights

561mm/724mm/900mm

15mm cabinet - to BS EN 312-P2,

to BS EN 312-P3

Hardboard back with horizontal

fi xing rail

Under shelf support for strength

Internal cabinet fi nished in white with

choice of external cabinet colours

15mm shelving with plastic shelf

support (one shelf 561mm and 724mm

high, two shelves 900mm high)

Co-ordinated front edge lipping to

match external cabinet fi nish

1

2

3

4

5

6

7

8

15MM VISTA BASE UNIT SPECIFICATION

1

2

3

4

5

6

7

8

9

10

11

12

13

Vista Back RailShelf Bracket

Worktop Fixing Bracket

Drawer RunnersRail Fixing

Cam & DowelWall Fixing Bracket

Leg

Drawer Box



MR

MR


98

UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200

BASE UNITS 500 deep 0.08 0.11 0.12 0.14 0.17 0.23 - 0.29 0.35

600 deep 0.09 0.12 0.14 0.16 0.20 0.26 0.29 0.34 0.41

WALL UNITS 561 high 0.04 0.05 0.06 0.06 0.08 0.10 0.12 0.13 -

724 high 0.05 0.07 0.08 0.08 0.10 0.14 0.16 0.18 -

900 high 0.06 0.08 0.09 0.10 0.13 0.17 0.19 0.22 -

BROOM LARDER

(2100MM)

500 deep - - - 0.39 0.43 - - - -

600 deep 0.25 - - 0.44 0.52 - - - -

BROOM LARDER

(2276MM)

500 deep - - - 0.42 0.50 - - - -

600 deep 0.30 - - 0.48 0.63 - - - -

ANGLE CORNER

WALL UNITS

561 high - - - - 0.10 - - - -

724 high - - - - 0.13 - - - -

900 high - - - - 0.17 - - -

OVER COOKER

HOOD UNITS

300 high - - - - 0.04 - - - -

TALL APPLIANCE

HOUSING

2100 high - - - - 0.54 - - - -

2276 high - - - - 0.59 - - - -


18MM EXCEL CABINETS18MM EXCEL CABINETS


18MM EXCEL CABINETS

18mm high density, fi ne surface particle

board, which complies with

BS EN 312-P2, is used to produce Excel

cabinet side panels, bases, shelves and

rails. Cabinets are supplied on adjustable

legs and feature concealed adjustable wall

hanging brackets. Vulnerable edges are

lipped to resist moisture seeping into

the panels.

BACKS

To allow services to run behind the units,

inset hardboard fi tted backs come as

standard. Backs for 600mm deep modules

are inset by 66mm and 500mm units

by 15mm.

FRONTALS



replaced easily.

DRAWER SYSTEM

The drawer box consists of two metal sides,

a metal back and a 15mm chipboard base.

For high abrasion resistance the metal


action metal roller system, featuring




BS 6222 Part 2 Level H. Drawer fronts can

be adjusted horizontally and vertically.

SOFTPLUS

SoftPlus is a soft close system available as

an optional extra on 18mm Excel. SoftPlus

is available with a soft close drawer system

and soft close hinges.

HINGES

Fully adjustable all metal hinges that

open to 170° come as standard. Hinges

that open to 110° are an optional extra.

Full alignment can be achieved with



Level H.




hygienic fi nish.

PLINTHS



SHELF SUPPORTS

Metal shelf supports are used for all 18mm

Excel units.

LEGS




LOCKABLE UNITS



Locks can be ordered separately. See

page 29.

CONSTRUCTION

Cam and dowel construction is used to

produce the cabinets, which provides

optimum rigidity. Inset fi tted back with void of 66mm for

easy access to pipes and services

15mm chipboard drawer base

Fully adjustable drawer front for

full alignment




Cam and dowel construction for

extra rigidity

3-way fully adjustable all-metal hinge for

full alignment - 170° (or 110° option) (Available

with SoftPlus hinge upgrade)

18mm cabinet with interior and exterior

fully co-ordinated



Colour co-ordinated clip on continuous

plinth for fl ush fl oor level fi t


Fully co-ordinated front edge lipping

matches cabinet exterior

Wall Fixing BracketWorktop Fixing Bracket

Rail Fixings

Cam & Dowel

Drawer Runners

1

7

23

4

11

65

8

910

Leg

Shelf Bracket

Drawer Box

Concealed fully adjustable wall hanging brackets

One piece unit back

3 wall unit heights 561mm/724mm/900mm


full alignment - 170° (or 110° option)

(Available with SoftPlus hinge upgrade)


fully co-ordinated

18mm shelving (One shelf 561mm high, two shelves

724mm and 900mm high)

Metal shelf supports

Cam & dowel construction for extra rigidity

18MM EXCEL WALL UNITSPECIFICATION

1

2

3

4

5

7

8

6

18MM EXCEL BASE UNITSPECIFICATION

1

2

3

4

5

6

7

8

9

10

11

Wall Hanging Bracket



1

2

5

3

6

4

7

8


98

UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200

BASE UNITS 500 deep 0.08 0.11 0.12 0.14 0.17 0.23 - 0.29 0.35

600 deep 0.09 0.12 0.14 0.16 0.20 0.26 0.29 0.34 0.41

WALL UNITS 561 high 0.04 0.05 0.06 0.06 0.08 0.10 0.12 0.13 -

724 high 0.05 0.07 0.08 0.08 0.10 0.14 0.16 0.18 -

900 high 0.06 0.08 0.09 0.10 0.13 0.17 0.19 0.22 -

BROOM LARDER

(2100MM)

500 deep - - - 0.39 0.43 - - - -

600 deep 0.25 - - 0.44 0.52 - - - -

BROOM LARDER

(2276MM)

500 deep - - - 0.42 0.50 - - - -

600 deep 0.30 - - 0.48 0.63 - - - -

ANGLE CORNER

WALL UNITS

561 high - - - - 0.10 - - - -

724 high - - - - 0.13 - - - -

900 high - - - - 0.17 - - -

OVER COOKER

HOOD UNITS

300 high - - - - 0.04 - - - -

TALL APPLIANCE

HOUSING

2100 high - - - - 0.54 - - - -

2276 high - - - - 0.59 - - - -


18MM EXCEL CABINETS18MM EXCEL CABINETS


18MM EXCEL CABINETS

18mm high density, fi ne surface particle

board, which complies with

BS EN 312-P2, is used to produce Excel

cabinet side panels, bases, shelves and

rails. Cabinets are supplied on adjustable

legs and feature concealed adjustable wall

hanging brackets. Vulnerable edges are

lipped to resist moisture seeping into

the panels.

BACKS

To allow services to run behind the units,

inset hardboard fi tted backs come as

standard. Backs for 600mm deep modules

are inset by 66mm and 500mm units

by 15mm.

FRONTALS



replaced easily.

DRAWER SYSTEM

The drawer box consists of two metal sides,

a metal back and a 15mm chipboard base.

For high abrasion resistance the metal


action metal roller system, featuring




BS 6222 Part 2 Level H. Drawer fronts can

be adjusted horizontally and vertically.

SOFTPLUS

SoftPlus is a soft close system available as

an optional extra on 18mm Excel. SoftPlus

is available with a soft close drawer system

and soft close hinges.

HINGES

Fully adjustable all metal hinges that

open to 170° come as standard. Hinges

that open to 110° are an optional extra.

Full alignment can be achieved with



Level H.




hygienic fi nish.

PLINTHS



SHELF SUPPORTS

Metal shelf supports are used for all 18mm

Excel units.

LEGS




LOCKABLE UNITS



Locks can be ordered separately. See

page 29.

CONSTRUCTION

Cam and dowel construction is used to

produce the cabinets, which provides

optimum rigidity. Inset fi tted back with void of 66mm for

easy access to pipes and services

15mm chipboard drawer base

Fully adjustable drawer front for

full alignment




Cam and dowel construction for

extra rigidity


full alignment - 170° (or 110° option) (Available

with SoftPlus hinge upgrade)


fully co-ordinated



Colour co-ordinated clip on continuous

plinth for fl ush fl oor level fi t


Fully co-ordinated front edge lipping

matches cabinet exterior

Wall Fixing BracketWorktop Fixing Bracket

Rail Fixings

Cam & Dowel

Drawer Runners

1

7

23

4

11

65

8

910

Leg

Shelf Bracket

Drawer Box

Concealed fully adjustable wall hanging brackets

One piece unit back

3 wall unit heights 561mm/724mm/900mm


full alignment - 170° (or 110° option)

(Available with SoftPlus hinge upgrade)


fully co-ordinated

18mm shelving (One shelf 561mm high, two shelves

724mm and 900mm high)



18MM EXCEL WALL UNITSPECIFICATION

1

2

3

4

5

7

8

6

18MM EXCEL BASE UNITSPECIFICATION

1

2

3

4

5

6

7

8

9

10

11

Wall Hanging Bracket



1

2

5

3

6

4

7

8


1110

UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200

BASE UNITS 600 deep 0.07 0.10 0.11 0.12 0.15 - - - -

WALL UNITS 724 high 0.05 0.07 0.08 0.08 0.10 - - - -

BROOM LARDER

(2100MM)

600 deep 0.25 - - 0.44 0.52 - - - -


18MM ESPRIT CABINETS18MM ESPRIT CABINETS


GENERAL INFORMATION

Esprit 18mm rigid cabinets have been

tested to and comply with the requirements

of BS 6222 Part 2 Level H.

18MM CABINET



chipboard. Vulnerable cabinet edges are

lipped to resist moisture seepage in to the

panels. All chipboard is manufactured to

comply with BS/EN 312-3 (P2).

BACKS


as standard. Backs are inset by 53mm to

allow services to run behind.

HINGES

As standard, fully adjustable all-metal clip-

on hinges are 170° opening. The hinges

comply fully with BS 6222 Part 2 Level H,

allowing full alignment.

DRAWER SYSTEM

Esprit 18mm metal drawer box system

has a 16mm chipboard base and

quadro runners. The system has been

independently tested by FIRA and




pneumatic action.

WALL HANGING BRACKETS

Wall unit support plates and brackets

are made from 3mm steel. The patented

hanging brackets allow 5 levels of

adjustment, up or down the wall, by up to

160mm (Patent no. 88216056 registered

design no. 1053559).

WORKTOP BRACKETS

Worktop brackets are fabricated from 25 x

25mm tubular steel and allow worktops to

be supported from the wall allowing

the same levels of adjustment as wall and

base units.

PLINTH

Tall units are supplied with colour

co-ordinated 15mm clip-on plinth.

ADJUSTABLE LEGS

Tall units are supplied on adjustable legs

providing easy installation.

METAL FITTINGS



WIREWORK

All wirework used in the range is chrome,

for a tough, hygienic fi nish.

WORKTOPS



chipboard. Front edges have an application

of wax for extra protection against water

ingress. Back edges are sealed by

wax injection.

SHELF SUPPORTS

18mm Esprit Units have metal shelf supports.

HANDINGS



if looking at the unit from the front.

UNIT DIMENSIONS


as shown. Patented hanging brackets allowing 5 levels of adjustment up or down the wall by up to 160mm (Patent no. 88216056, registered design no. 1053559).

Inset fi tted back with void of 53mm for easy access to pipes and services

3-way fully adjustable all-metal clip-on hinge for full alignment - 170°

18mm cabinet with interior and exterior fully co-ordinated

Fully co-ordinated front edge lipping matches cabinet exterior


1

2

3

6

7

5

4

1

2

3

4

5

Patented hanging brackets allowing 5 levels of adjustment up or down the wall by up to 160mm (Patent no. 88216056, registered design no. 1053559).

One piece unit back

3-way fully adjustable all-metal clip-on hinge for perfect alignment - 170°


18mm shelving (Two shelves on 724mm high)



18MM ESPRIT WALL UNITSPECIFICATION

18MM ESPRIT BASE UNIT SPECIFICATION

1

2

3

4

5

6

7

6

1

2

3

4

5

6

Esprit Hanging Bracket

Esprit Unit with Bracket

Esprit Units Mounted on

Brackets

Esprit Drawer Box


1110

UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200

BASE UNITS 600 deep 0.07 0.10 0.11 0.12 0.15 - - - -

WALL UNITS 724 high 0.05 0.07 0.08 0.08 0.10 - - - -

BROOM LARDER

(2100MM)

600 deep 0.25 - - 0.44 0.52 - - - -


18MM ESPRIT CABINETS18MM ESPRIT CABINETS


GENERAL INFORMATION

Esprit 18mm rigid cabinets have been

tested to and comply with the requirements

of BS 6222 Part 2 Level H.

18MM CABINET



chipboard. Vulnerable cabinet edges are

lipped to resist moisture seepage in to the

panels. All chipboard is manufactured to

comply with BS/EN 312-3 (P2).

BACKS


as standard. Backs are inset by 53mm to

allow services to run behind.

HINGES

As standard, fully adjustable all-metal clip-

on hinges are 170° opening. The hinges

comply fully with BS 6222 Part 2 Level H,

allowing full alignment.

DRAWER SYSTEM

Esprit 18mm metal drawer box system

has a 16mm chipboard base and

quadro runners. The system has been

independently tested by FIRA and




pneumatic action.

WALL HANGING BRACKETS

Wall unit support plates and brackets

are made from 3mm steel. The patented

hanging brackets allow 5 levels of

adjustment, up or down the wall, by up to

160mm (Patent no. 88216056 registered

design no. 1053559).

WORKTOP BRACKETS

Worktop brackets are fabricated from 25 x

25mm tubular steel and allow worktops to

be supported from the wall allowing

the same levels of adjustment as wall and

base units.

PLINTH

Tall units are supplied with colour

co-ordinated 15mm clip-on plinth.

ADJUSTABLE LEGS

Tall units are supplied on adjustable legs

providing easy installation.

METAL FITTINGS



WIREWORK

All wirework used in the range is chrome,

for a tough, hygienic fi nish.

WORKTOPS



chipboard. Front edges have an application

of wax for extra protection against water

ingress. Back edges are sealed by

wax injection.

SHELF SUPPORTS

18mm Esprit Units have metal shelf supports.

HANDINGS



if looking at the unit from the front.

UNIT DIMENSIONS


as shown. Patented hanging brackets allowing 5 levels of adjustment up or down the wall by up to 160mm (Patent no. 88216056, registered design no. 1053559).

Inset fi tted back with void of 53mm for easy access to pipes and services

3-way fully adjustable all-metal clip-on hinge for full alignment - 170°


Fully co-ordinated front edge lipping matches cabinet exterior


1

2

3

6

7

5

4

1

2

3

4

5

Patented hanging brackets allowing 5 levels of adjustment up or down the wall by up to 160mm (Patent no. 88216056, registered design no. 1053559).

One piece unit back

3-way fully adjustable all-metal clip-on hinge for perfect alignment - 170°


18mm shelving (Two shelves on 724mm high)



18MM ESPRIT WALL UNITSPECIFICATION

18MM ESPRIT BASE UNIT SPECIFICATION

1

2

3

4

5

6

7

6

1

2

3

4

5

6

Esprit Hanging Bracket

Esprit Unit with Bracket

Esprit Units Mounted on

Brackets

Esprit Drawer Box


13

1000mm

12

ESPRIT PLANNING AND INSTALLATIONESPRIT PLANNING AND INSTALLATION

Measure 1000mm from the fl oor and mark this point on the wall.

Using a spirit level, draw a horizontal line around the walls from

this point. This is the datum line.

Before fi xing the hanging plates to the wall, measure and mark

the end position for the base units, wall units and worktop ends.

This is where the hanging plates will end - some hanging plates

may need to be cut down.

Where the smallest measurement is taken measure up from the

fl oor, 705mm. Create a new level datum line from this point.

Wall units, base units and worktop support brackets can now be

lifted onto the wall hanging plates. Please refer to ‘Step 3’ for

height settings.

From this datum line, measure down at various points, calculating

the highest point of the fl oor from the smallest measurement.

Fix the wall hanging plates with the pre-drilled screw holes in line

with the datum lines drawn in fi g 1.3 & 1.4.

Cut down any overlapping hanging plates inline with end

markings made in fi g. 2.1.

For the positioning of wall units, measure up 1192mm from the

new datum line and create a second level datum line.

With all the wall units, base units and worktop support brackets in

position check the levels before commencing. Adjust levels using

the methods shown in ‘Step 3’.

STEP 1: DATUMS AND DIMENSIONS STEP 2: PLANNING AND FITTING

Having checked the plot for level and square, commence by marking a level datum line on the wall around the

base unit area. The datum line will provide a level mark for positioning the hanging brackets for wall units, base

units and worktops.

Note: For safety reasons, please ensure that wall hanging plates are screwed securely into a solid wall or battening in the wall. Never

bend wall hanging plates to fi t an uneven wall, if necessary use metal washers between the wall and hanging bracket. Fix hanging plates

using 2” No. 10 screws and plugs.

1000mm

1.1 2.11.2 2.2

705mm

1192mm

705mm

1.3 2.31.4 2.4

PLUMBING AND ELECTRICAL CONNECTIONS:

Height adjustment of units will be impaired if plumbing and

electrical installations are not made correctly. Taps are supplied

with fl exible hose connections. We strongly recommend that

fl exible hosing is used for all wastes and plumbing work to allow

for maximum adjustment.

TILING AND DECORATION:

Tiling and decoration should be completed and dry prior to fi xing

of wall hanging plates. It is recommended that wall hanging plates

are fi xed on top of tiles. Tiles should therefore start at 650mm

from the fl oor and extend to 1800mm.


13

1000mm

12

ESPRIT PLANNING AND INSTALLATIONESPRIT PLANNING AND INSTALLATION

Measure 1000mm from the fl oor and mark this point on the wall.

Using a spirit level, draw a horizontal line around the walls from

this point. This is the datum line.

Before fi xing the hanging plates to the wall, measure and mark

the end position for the base units, wall units and worktop ends.

This is where the hanging plates will end - some hanging plates

may need to be cut down.

Where the smallest measurement is taken measure up from the

fl oor, 705mm. Create a new level datum line from this point.

Wall units, base units and worktop support brackets can now be

lifted onto the wall hanging plates. Please refer to ‘Step 3’ for

height settings.

From this datum line, measure down at various points, calculating

the highest point of the fl oor from the smallest measurement.

Fix the wall hanging plates with the pre-drilled screw holes in line

with the datum lines drawn in fi g 1.3 & 1.4.

Cut down any overlapping hanging plates inline with end

markings made in fi g. 2.1.

For the positioning of wall units, measure up 1192mm from the

new datum line and create a second level datum line.

With all the wall units, base units and worktop support brackets in

position check the levels before commencing. Adjust levels using

the methods shown in ‘Step 3’.

STEP 1: DATUMS AND DIMENSIONS STEP 2: PLANNING AND FITTING

Having checked the plot for level and square, commence by marking a level datum line on the wall around the

base unit area. The datum line will provide a level mark for positioning the hanging brackets for wall units, base

units and worktops.

Note: For safety reasons, please ensure that wall hanging plates are screwed securely into a solid wall or battening in the wall. Never

bend wall hanging plates to fi t an uneven wall, if necessary use metal washers between the wall and hanging bracket. Fix hanging plates

using 2” No. 10 screws and plugs.

1000mm

1.1 2.11.2 2.2

705mm

1192mm

705mm

1.3 2.31.4 2.4

PLUMBING AND ELECTRICAL CONNECTIONS:

Height adjustment of units will be impaired if plumbing and

electrical installations are not made correctly. Taps are supplied

with fl exible hose connections. We strongly recommend that

fl exible hosing is used for all wastes and plumbing work to allow

for maximum adjustment.

TILING AND DECORATION:

Tiling and decoration should be completed and dry prior to fi xing

of wall hanging plates. It is recommended that wall hanging plates

are fi xed on top of tiles. Tiles should therefore start at 650mm

from the fl oor and extend to 1800mm.


1514

ADJUSTMENT AND FIXING - ELECTRONICADJUSTMENT AND FIXING - MANUAL

NB: Fixing positions A & B require a fi rm seating position on a solid wall or battening in the wall.

NB: Tall units should be levelled on the fl oor and fi xed to the wall in accordance with fi tting instructions for standard 18mm units

available. All dimensions in millimetres.

All dimensions in millimetres.


Please use the illustrations here as a guide to fi xing positions and adjustment. Instructions for fi tting and construction are supplied with

the products. Note: For safety reasons, please ensure all fi xings are screwed securely into a solid wall or battening in the wall.

STEP 3: FINAL ADJUSTMENT AND FIXING ADJUSTABLE WORKTOP

ADJUSTABLE WALL UNITS

Set support brackets at the desired position before fi tting worktops. Hanging brackets allow fi ve levels of

adjustment between minimum and maximum in 40mm increments. Further adjustment is made by turning the

adjuster screw at the bottom of the units with a 19mm spanner.

Tall Unit Height

2100

Wall Hanging Plate

Fixing Position

1897

Adjustment

160mm

Adjustment

160mm

Wall Hanging Plate

Fixing Position

705

Max

939Min

779

AdjustmentA

A

C C

D

B

Adjustment

160mm

Max

2100

Max

939

Min

1940

Min

779

Wall Hanging

Plate Fixing

Position

705

1192

B

A

FixingC D

x2

Wall Unit

Extension*

520

338

*Actual Carcase Depth

Wall Units = 325

Adjustable Base Units = 557

Fixed Tall Units = 570

210

0 1954

146

561

724

304

50

Ad

just

able

Ad

just

ableM

in 7

60

Ho

b -

Ho

od

Plinth Position

Carcase Extension*

Worktop Extension

570

600

3.1

3.2

11

8

46

3 Min

66

0

Max

96

0

63

0

47

5

34

5

93

0

Ad

just

me

nt

30

0m

m

Worktop Depth

Min 590mm

Max 620mm

Worktop Length

Min 950mm

Max 1950mm

Distance Plates(Spaces to avoid

skirting boards)

5mm Gap

Behind Worktops

Leg

WorktopAlu

Support Bar

Foot60

70

579

Ad

just

me

nt

42

8M

ax 2

10

0

Min

16

72

Mounting

Frame

Mounting

Frame

560

1320

70

0

75

100

108

352

33

2

13

76

Wall Unit

Outline

Wal

l U

nit

He

igh

t 7

24

mm

90

8

13

93

33

23

32

17

252

05

7

400

179115

Wall Units Width 1500mm

325


1514

ADJUSTMENT AND FIXING - ELECTRONICADJUSTMENT AND FIXING - MANUAL

NB: Fixing positions A & B require a fi rm seating position on a solid wall or battening in the wall.

NB: Tall units should be levelled on the fl oor and fi xed to the wall in accordance with fi tting instructions for standard 18mm units

available. All dimensions in millimetres.



Please use the illustrations here as a guide to fi xing positions and adjustment. Instructions for fi tting and construction are supplied with

the products. Note: For safety reasons, please ensure all fi xings are screwed securely into a solid wall or battening in the wall.

STEP 3: FINAL ADJUSTMENT AND FIXING ADJUSTABLE WORKTOP

ADJUSTABLE WALL UNITS

Set support brackets at the desired position before fi tting worktops. Hanging brackets allow fi ve levels of

adjustment between minimum and maximum in 40mm increments. Further adjustment is made by turning the

adjuster screw at the bottom of the units with a 19mm spanner.

Tall Unit Height

2100

Wall Hanging Plate

Fixing Position

1897

Adjustment

160mm

Adjustment

160mm

Wall Hanging Plate

Fixing Position

705

Max

939Min

779

AdjustmentA

A

C C

D

B

Adjustment

160mm

Max

2100

Max

939

Min

1940

Min

779

Wall Hanging

Plate Fixing

Position

705

1192

B

A

FixingC D

x2

Wall Unit

Extension*

520

338

*Actual Carcase Depth

Wall Units = 325

Adjustable Base Units = 557

Fixed Tall Units = 570

210

0 1954

146

561

724

304

50

Ad

just

able

Ad

just

ableM

in 7

60

Ho

b -

Ho

od

Plinth Position

Carcase Extension*

Worktop Extension

570

600

3.1

3.2

11

8

46

3 Min

66

0

Max

96

0

63

0

47

5

34

5

93

0

Ad

just

me

nt

30

0m

m

Worktop Depth

Min 590mm

Max 620mm

Worktop Length

Min 950mm

Max 1950mm

Distance Plates(Spaces to avoid

skirting boards)

5mm Gap

Behind Worktops

Leg

WorktopAlu

Support Bar

Foot60

70

579

Ad

just

me

nt

42

8M

ax 2

10

0

Min

16

72

Mounting

Frame

Mounting

Frame

560

1320

70

0

75

100

108

352

33

2

13

76

Wall Unit

Outline

Wal

l U

nit

He

igh

t 7

24

mm

90

8

13

93

33

23

32

17

252

05

7

400

179115

Wall Units Width 1500mm

325


1716

PRODUCT AVAILABILITY MATRIXPRODUCT AVAILABILITY MATRIX

RANGE HINGES CABINET THICKNESS

CABINET COLOUR DRAWERBOX SOFT CLOSE DOORS

VISTA STANDARD 170 15mm colour exterior/white interior Supra No


VISTA SOFT PLUS 170 15mm colour exterior/white interior Supra SoftPlus Yes


EXCEL STANDARD 170 18mm colour co-ordinated interior & exterior Supra No


EXCEL SOFT PLUS* 170 18mm colour co-ordinated interior & exterior Supra SoftPlus Yes


ESPRIT 170 18mm colour co-ordinated interior & exterior Revo Yes

RANGE COLOUR 18MM EXCEL CABINET(INTERIOR & EXTERIOR)

18MM EXCEL CORNER POST

15MM VISTA CABINET (EXTERIOR & EDGING)

15MM VISTA CORNER POST

15MM VISTA P3 MOISTURE RESISTANT CABINET

18MM ESPRIT CABINET

READY FOR ASSEMBLY

AINSDALE White White White White White White n/a n/a

ARLINGTON Dijon Walnut Mezzo Dijon Walnut Mezzo Mezzo n/a n/a n/a

BOSTON White* White White White White n/a White, Pear, Walnut n/a

BRAEMAR Oak Oak Oak White or Oak White or Oak White n/a Yes

BROMLEY Pear* Pear Pear Pear or White Pear or White White Pear Yes

BROMLEY Oak* Oak Oak Oak or White Oak or White White Oak Yes

CALGARY Pear or Apple* Pear Pear White or Pear White or Pear White Pear n/a

CALGARY White White White White White White n/a n/a

GALWAY Pear*, Apple* or Green Alder* White, Pear or Ivory Pear White, Pear or Ivory White, Pear or Ivory White Pear Yes

GEORGIA Mezzo Mezzo Mezzo Mezzo Mezzo n/a n/a n/a

GEORGIA Maple Pear Maple Pear Pear n/a n/a n/a

GEORGIA Oak Oak Oak Oak Oak n/a n/a n/a

GEORGIA Walnut Walnut Walnut Walnut Walnut n/a n/a n/a

HACIENDA White Ash* White White Ash White White White White n/a

HACIENDA Champagne Ivory or Walnut Champagne Ivory or Walnut Ivory or Walnut White n/a n/a

HACIENDA Ivory Ivory or Walnut Ivory Ivory or Walnut Ivory or Walnut White n/a n/a

HUDSON Oak* n/a n/a n/a n/a n/a Oak n/a

MEDFORD White White White White White White White n/a

MIAMI Walnut Walnut Walnut Walnut Walnut n/a n/a n/a

MIAMI Pear Pear Pear Pear Pear n/a n/a n/a

MIAMI Mezzo Mezzo Mezzo Mezzo Mezzo n/a n/a n/a

OAKLAND Slate* White or Ivory Slate White or Ivory White or Ivory White White n/a

OAKLAND Stone White or Ivory Stone White or Ivory White or Ivory White n/a n/a

OAKLAND Taupe White or Ivory Taupe White or Ivory White or Ivory White n/a n/a

OREGON White* White or Walnut White or Walnut White White White White, Pear or Walnut Yes

OREGON Dove Grey White or Walnut White or Walnut White White White n/a Yes

OREGON Cream* Pear, Walnut or Ivory Pear, Walnut or Ivory Pear or Ivory Pear or Ivory White Pear Yes

OREGON Barley Pear, Walnut or Ivory Pear, Walnut or Ivory Pear or Ivory Pear or Ivory White n/a Yes

PASADENA Maple* Pear Pear Pear Pear White Pear or White n/a

PASADENA Oak* Oak Oak Oak Oak White Oak, Pear or White n/a

TULSA Sand Zebrano, Romana Cherry or Chateau Oak Romana

Pear or Ivory Pear Pear or Ivory Pear or Ivory n/a n/a n/a

VIRGINIA Walnut* Walnut Walnut Walnut Walnut n/a Walnut Yes

VIRGINIA Maple* Pear Maple Pear Pear n/a Pear Yes

WESTPORT White White White White White White n/a n/a

WESTPORT Ivory Ivory Ivory Ivory Ivory n/a n/a n/a

WOODBURY White White White White White White n/a n/a

WOODBURY Ivory Ivory Ivory Ivory Ivory White n/a n/a

TALL UNIT 720 WALL UNIT

900 WALL UNIT

560 WALL UNIT

SINGLE BASE UNIT

DOUBLE BASE UNIT

BRIDGING UNIT

DRAWERPACK

Kubix maintains a rigorously high standard at all levels. From design to production methods, we provide quality kitchens which are built to last, each one conforming to the high standards of our quality assurance programme.

Choice and fl exibility are key and we are continually expanding our range to provide even greater scope for meeting our clients’/customers’ design and capacity requirements. We are dedicated to providing you with premium products in compliance with market requirements. ELEVATIONS

USAGE GUIDANCE AND ORDERING CHECKLISTS

This guide has been created to

provide you with an overview

of Kubix’s product specifi cation.

Details of availability,

construction, capacity and

dimensions are shown for

base and wall units along with

tall units, appliance housings

and over cooker hoods.

Specifi cations for worktops,

accessories and self assembly

are also available along with

advice on ordering, storage

and maintenance to enable

hassle free installation and

maintenance.

ORDERING CHECK LIST

Below is a list of the information we will

require in order to supply your exact

requirements.

UNITS

• Provide range and fi nish e.g. Range/

Cabinet colour/Door colour.

• State 15mm Vista standard, 15mm Vista

MR standard or 18mm Excel standard. If

soft close is required, please state 15mm

Vista SoftPlus, 15mm Vista MR SoftPlus

or 18mm Excel SoftPlus.

• Confi rm your handle/trim option where

appropriate.

• Provide the full unit code for each item.

• Confi rm the required unit handings

where appropriate. Please see the note

on page 4.

• If you require 110° hinges (which are

an optional extra), please specify. 170°

hinges (for both 15mm Vista and 18mm

Excel) will be supplied as standard.

• Corner base units – ensure that the

appropriate codes for style and variations

have been supplied.

• Appliance housings – the manufacturer’s

name and model number of the

appliance to be specifi ed along with the

aperture size if known.

WORKTOPS

• Provide the style, colour, thickness

and length required. See page 32 for

details.

• If you require Moisture Resistant

Worktops (BS EN 312-P3), please advise.

• If your design is complicated please

include a detailed plan showing

dimensions, cut out positions and sizes

and places where worktops abut.

• Should you need Mason Mitre Joints,

Please contact your local Symphony

representative or call Symphony’s

Building Division Sales Offi ce on

01226 446000.

SINKTOPS

• Provide the unit code, the handing of

the drainer and the colour required (if

applicable).

• Waste and overfl ow kits – specify

if required.

• Accessory packs – specify if required

TAPS

• Specify style, code and colour (if

applicable).

FOR ALL ORDERS

• Provide full details of the delivery site

address, including the development

name (where appropriate) and an on site

contact name and phone number.

• State your required week commencing

delivery date.

• Provide your Symphony C.A.D. drawing

number (if applicable) and quotation

reference number.

PLEASE NOTE:

• Symphony units are designed to

incorporate an offset corner post to

avoid handle clash. An added allowance

for fl oor space is required. If overlooked,

this may result in problems on site. See

page 19 for details.

• Illustrations in this booklet are intended

as a representation only and are not

necessarily correctly

scaled, proportioned or detailed.

• All sizes given are nominal. If exact unit,

door or other dimensions are required

please contact your local Symphony



01226 446000.

• All units are manufactured within

industry standards for dimensional

tolerance.

Should you require any further information

or assistance please contact your

local Symphony representative or call

Symphony’s Building Division Sales Offi ce

on 01226 446000.

*Available in Esprit


1716

PRODUCT AVAILABILITY MATRIXPRODUCT AVAILABILITY MATRIX

RANGE HINGES CABINET THICKNESS

CABINET COLOUR DRAWERBOX SOFT CLOSE DOORS









ESPRIT 170 18mm colour co-ordinated interior & exterior Revo Yes

RANGE COLOUR 18MM EXCEL CABINET(INTERIOR & EXTERIOR)

18MM EXCEL CORNER POST

15MM VISTA CABINET (EXTERIOR & EDGING)

15MM VISTA CORNER POST

15MM VISTA P3 MOISTURE RESISTANT CABINET

18MM ESPRIT CABINET

READY FOR ASSEMBLY

AINSDALE White White White White White White n/a n/a

ARLINGTON Dijon Walnut Mezzo Dijon Walnut Mezzo Mezzo n/a n/a n/a

BOSTON White* White White White White n/a White, Pear, Walnut n/a

BRAEMAR Oak Oak Oak White or Oak White or Oak White n/a Yes

BROMLEY Pear* Pear Pear Pear or White Pear or White White Pear Yes

BROMLEY Oak* Oak Oak Oak or White Oak or White White Oak Yes

CALGARY Pear or Apple* Pear Pear White or Pear White or Pear White Pear n/a

CALGARY White White White White White White n/a n/a

GALWAY Pear*, Apple* or Green Alder* White, Pear or Ivory Pear White, Pear or Ivory White, Pear or Ivory White Pear Yes

GEORGIA Mezzo Mezzo Mezzo Mezzo Mezzo n/a n/a n/a

GEORGIA Maple Pear Maple Pear Pear n/a n/a n/a

GEORGIA Oak Oak Oak Oak Oak n/a n/a n/a

GEORGIA Walnut Walnut Walnut Walnut Walnut n/a n/a n/a

HACIENDA White Ash* White White Ash White White White White n/a

HACIENDA Champagne Ivory or Walnut Champagne Ivory or Walnut Ivory or Walnut White n/a n/a

HACIENDA Ivory Ivory or Walnut Ivory Ivory or Walnut Ivory or Walnut White n/a n/a

HUDSON Oak* n/a n/a n/a n/a n/a Oak n/a

MEDFORD White White White White White White White n/a

MIAMI Walnut Walnut Walnut Walnut Walnut n/a n/a n/a

MIAMI Pear Pear Pear Pear Pear n/a n/a n/a

MIAMI Mezzo Mezzo Mezzo Mezzo Mezzo n/a n/a n/a

OAKLAND Slate* White or Ivory Slate White or Ivory White or Ivory White White n/a

OAKLAND Stone White or Ivory Stone White or Ivory White or Ivory White n/a n/a

OAKLAND Taupe White or Ivory Taupe White or Ivory White or Ivory White n/a n/a

OREGON White* White or Walnut White or Walnut White White White White, Pear or Walnut Yes

OREGON Dove Grey White or Walnut White or Walnut White White White n/a Yes

OREGON Cream* Pear, Walnut or Ivory Pear, Walnut or Ivory Pear or Ivory Pear or Ivory White Pear Yes

OREGON Barley Pear, Walnut or Ivory Pear, Walnut or Ivory Pear or Ivory Pear or Ivory White n/a Yes

PASADENA Maple* Pear Pear Pear Pear White Pear or White n/a

PASADENA Oak* Oak Oak Oak Oak White Oak, Pear or White n/a

TULSA Sand Zebrano, Romana Cherry or Chateau Oak Romana

Pear or Ivory Pear Pear or Ivory Pear or Ivory n/a n/a n/a

VIRGINIA Walnut* Walnut Walnut Walnut Walnut n/a Walnut Yes

VIRGINIA Maple* Pear Maple Pear Pear n/a Pear Yes

WESTPORT White White White White White White n/a n/a

WESTPORT Ivory Ivory Ivory Ivory Ivory n/a n/a n/a

WOODBURY White White White White White White n/a n/a

WOODBURY Ivory Ivory Ivory Ivory Ivory White n/a n/a

TALL UNIT 720 WALL UNIT

900 WALL UNIT

560 WALL UNIT

SINGLE BASE UNIT

DOUBLE BASE UNIT

BRIDGING UNIT

DRAWERPACK

Kubix maintains a rigorously high standard at all levels. From design to production methods, we provide quality kitchens which are built to last, each one conforming to the high standards of our quality assurance programme.

Choice and fl exibility are key and we are continually expanding our range to provide even greater scope for meeting our clients’/customers’ design and capacity requirements. We are dedicated to providing you with premium products in compliance with market requirements. ELEVATIONS

USAGE GUIDANCE AND ORDERING CHECKLISTS

This guide has been created to

provide you with an overview

of Kubix’s product specifi cation.

Details of availability,

construction, capacity and

dimensions are shown for

base and wall units along with

tall units, appliance housings

and over cooker hoods.

Specifi cations for worktops,

accessories and self assembly

are also available along with

advice on ordering, storage

and maintenance to enable

hassle free installation and

maintenance.

ORDERING CHECK LIST

Below is a list of the information we will

require in order to supply your exact

requirements.

UNITS

• Provide range and fi nish e.g. Range/

Cabinet colour/Door colour.

• State 15mm Vista standard, 15mm Vista

MR standard or 18mm Excel standard. If

soft close is required, please state 15mm

Vista SoftPlus, 15mm Vista MR SoftPlus

or 18mm Excel SoftPlus.

• Confi rm your handle/trim option where

appropriate.

• Provide the full unit code for each item.

• Confi rm the required unit handings

where appropriate. Please see the note

on page 4.

• If you require 110° hinges (which are

an optional extra), please specify. 170°

hinges (for both 15mm Vista and 18mm

Excel) will be supplied as standard.

• Corner base units – ensure that the

appropriate codes for style and variations

have been supplied.

• Appliance housings – the manufacturer’s

name and model number of the

appliance to be specifi ed along with the

aperture size if known.

WORKTOPS

• Provide the style, colour, thickness

and length required. See page 32 for

details.

• If you require Moisture Resistant

Worktops (BS EN 312-P3), please advise.

• If your design is complicated please

include a detailed plan showing

dimensions, cut out positions and sizes

and places where worktops abut.

• Should you need Mason Mitre Joints,

Please contact your local Symphony



01226 446000.

SINKTOPS

• Provide the unit code, the handing of

the drainer and the colour required (if

applicable).

• Waste and overfl ow kits – specify

if required.

• Accessory packs – specify if required

TAPS

• Specify style, code and colour (if

applicable).

FOR ALL ORDERS

• Provide full details of the delivery site

address, including the development

name (where appropriate) and an on site

contact name and phone number.

• State your required week commencing

delivery date.

• Provide your Symphony C.A.D. drawing

number (if applicable) and quotation

reference number.

PLEASE NOTE:

• Symphony units are designed to

incorporate an offset corner post to

avoid handle clash. An added allowance

for fl oor space is required. If overlooked,

this may result in problems on site. See

page 19 for details.

• Illustrations in this booklet are intended

as a representation only and are not

necessarily correctly

scaled, proportioned or detailed.

• All sizes given are nominal. If exact unit,

door or other dimensions are required

please contact your local Symphony



01226 446000.

• All units are manufactured within

industry standards for dimensional

tolerance.

Should you require any further information

or assistance please contact your

local Symphony representative or call

Symphony’s Building Division Sales Offi ce

on 01226 446000.

*Available in Esprit


18 19

Single Base Unit•Full height doorOne door, one shelf

Single Base Unit - Lockable†•Full height doorOne door, one shelf

Single Base Unit•Drawer Line:One door, one drawer, one shelf

WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP

300 BU35F BU36F400 BU45F BU46F450 N/A BU456F500 BU55F BU56F600 BU65F BU66F

300 BU35FLK BU36FLK400 BU45FLK BU46FLK500 BU55FLK BU56FLK600 BU65FLK BU66FLK

300 BU35D BU36D400 BU45D BU46D450 N/A BU456D500 BU55D BU56D600 BU65D BU66D

Single Sink Base Unit•Full height door,one shelf, one sinkliner

Double Sink Base UnitTwo full height doors, one shelf, one sinkliner

Single Sink Base UnitOne door, dummy drawerone shelf, one sinkliner

WIDTH 600 DEEP WIDTH 600 DEEP WIDTH 600 DEEP

500 SU56SLF 600 SU66SLF

800 SU86SLF 900 SU96SLF 1000 SU106SLF 1200 SU126SLF

500 SU56SLD600 SU66SLD

Double Sink Base UnitDrawer Line: two doors, one working drawer, one dummy drawer, one shelf, one sinkliner

Double Sink Base UnitDrawer Line: two doors, two dummy drawers, one shelf, one sinkliner

WIDTH 600 DEEP WIDTH 600 DEEP

900 SU96SLDAC1000 SU106SLDAC1200 SU126SLDAC

900 SU96SLDAI1000 SU106SLDAI1200 SU126SLDAI

Drawer Base UnitFour drawers

Pan Drawer Base UnitOne drawer, two pull-outpan drawers

Built-under Oven HousingSupplied with a co-ordinatingfascia panel 120mm high.When fitting a built-under oven refer to the appliance manufacturer’s instructions regarding installation.


400 N/A DU46D500 DU55D DU56D600 DU65D DU66D

600 N/A PD66D3 600 N/A BOH66

Built-under Oven Housingwith Plinth DrawerSupplied ready for assembly with drawer.When fitting a built-under oven refer to the appliance manufacturer’s instructions regarding installation.

Double Base UnitFull height door,two doors, one shelf

Double Base UnitDrawer Line: two doors,two drawers, one shelf


600 N/A BOH66D 800 BU85F BU86F900 N/A BU96F1000 BU105F BU106F1200 BU125F BU126F

800 BU85D BU86D900 N/A BU96D1000 BU105D BU106D1200 BU125D BU126D

•Single base units can be hinged left or right. Please specify when ordering. For an explanation of handing, see page 4.†Lockable units are available for a limited door offer only - locks can be ordered separately. See page 29. Not all handles are compatible with lockable units - please refer to your Symphony Representative for further details.

•Single base units can be hinged left or right. Please specify when ordering. For an explanation of handing, see page 4.

VISTA AND EXCEL BASE UNITS VISTA AND EXCEL SINK AND HOB UNITS WITH SINKLINER

870

870

870

870

870

870

870

870870

870870

Single Base Unit•Full height door,one shelf

Double Sink Base UnitTwo full height doors,one shelf

Single Sink Base Unit•One door, dummy drawerone shelf


500 BU55F BU56F600 BU65F BU66F

1000 BU105F BU106F1200 BU125F BU126F

500 BU55DDD BU56DDD600 BU65DDD BU66DDD

Double Sink Base Unit*Drawer Line: two doors, one working drawer, one dummy drawer, one shelf

Double Sink Base UnitDrawer Line: two doors, two dummy drawers, one shelf

Pan Drawer Hob UnitOne dummy drawer, two pan drawers


1000 SU105D SU106D1200 SU125D SU126D

800 BU85DAI BU86DAI1000 SU105DAI SU106DAI1200 SU125DAI SU126DAI

600 N/A PD66D3DD

VISTA AND EXCEL SINK AND HOB UNITS WITHOUT SINKLINER

870

870870

870

870

Sink units are designed to support a sinktop or a worktop with an inset sink. The full length of a sit-on sinktop must be supported by units. Drainers of inset sinktops may be positioned over voids provided that the worktop is adequately supported. Please specify the drainer position of units marked*.•Single base units can be hinged left or right. Please specify when ordering.


Style A Style B Style C

WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE



800 500 CB85FA CB85DA800 600 CB86FA CB86DA

800 500 CB85FB CB85DB800 600 CB86FB CB86DB

800 500 CB85FC CB85DC800 600 CB86FC CB86DC

Style A Style A Style B




900 600 CB96FA CB96DA 1000 500 CB105FA CB105DA1000 600 CB106FA CB106DA


1200mm CBU L-Shape CBU(Shelf Unit)

Supplied in 1 x assembledand 1 x ready for assembly parts

L-Shape CBU(Carousel Unit)



SIZE FULL HEIGHT DRAWER DOOR LINE


1200 500 CB125F CB125D1200 600 CB126F CB126D

930 X 930 LSB99F LSB99D 930 X 930 LCB99F LCB99D

Kubix’s range of corner base units allows wide fl exibility in the positioning of corner units for the clearance of water or soil vent pipes when required. Depending on the blanking panel/door combinations specifi ed, corner base units can be positioned 30mm, 130mm, 180mm, 230mm or 330mm from the return wall in order to join with either a 500mm or 600mm deep base unit. Please specify the handing of the blanking panel side when ordering. For an explanation of handing see page 4. NB: if utilising 500mm wide units the overall space required for the corner base unit will be reduced by 100mm. All dimensions in millimetres.

VISTA AND EXCEL CORNER BASE UNITS

400Door

1030

340Blank

230mm Gap

300Door

930

540Blank

130mm Gap

240Blank

500Door

1130

330mm Gap

500Door

1130

540Blank

130mm Gap

1030

400Door

540Blank

30mm Gap

450Door

930

180mm Gap

390Blank

600Door

1230

30mm Gap

600Blank

870

870

870


18 19

Single Base Unit•Full height doorOne door, one shelf

Single Base Unit - Lockable†•Full height doorOne door, one shelf

Single Base Unit•Drawer Line:One door, one drawer, one shelf



300 BU35FLK BU36FLK400 BU45FLK BU46FLK500 BU55FLK BU56FLK600 BU65FLK BU66FLK


Single Sink Base Unit•Full height door,one shelf, one sinkliner

Double Sink Base UnitTwo full height doors, one shelf, one sinkliner

Single Sink Base UnitOne door, dummy drawerone shelf, one sinkliner

WIDTH 600 DEEP WIDTH 600 DEEP WIDTH 600 DEEP

500 SU56SLF 600 SU66SLF

800 SU86SLF 900 SU96SLF 1000 SU106SLF 1200 SU126SLF

500 SU56SLD600 SU66SLD

Double Sink Base UnitDrawer Line: two doors, one working drawer, one dummy drawer, one shelf, one sinkliner

Double Sink Base UnitDrawer Line: two doors, two dummy drawers, one shelf, one sinkliner

WIDTH 600 DEEP WIDTH 600 DEEP

900 SU96SLDAC1000 SU106SLDAC1200 SU126SLDAC

900 SU96SLDAI1000 SU106SLDAI1200 SU126SLDAI


Pan Drawer Base UnitOne drawer, two pull-outpan drawers

Built-under Oven HousingSupplied with a co-ordinatingfascia panel 120mm high.When fitting a built-under oven refer to the appliance manufacturer’s instructions regarding installation.


400 N/A DU46D500 DU55D DU56D600 DU65D DU66D

600 N/A PD66D3 600 N/A BOH66

Built-under Oven Housingwith Plinth DrawerSupplied ready for assembly with drawer.When fitting a built-under oven refer to the appliance manufacturer’s instructions regarding installation.

Double Base UnitFull height door,two doors, one shelf

Double Base UnitDrawer Line: two doors,two drawers, one shelf


600 N/A BOH66D 800 BU85F BU86F900 N/A BU96F1000 BU105F BU106F1200 BU125F BU126F


•Single base units can be hinged left or right. Please specify when ordering. For an explanation of handing, see page 4.†Lockable units are available for a limited door offer only - locks can be ordered separately. See page 29. Not all handles are compatible with lockable units - please refer to your Symphony Representative for further details.

•Single base units can be hinged left or right. Please specify when ordering. For an explanation of handing, see page 4.

VISTA AND EXCEL BASE UNITS VISTA AND EXCEL SINK AND HOB UNITS WITH SINKLINER

870

870

870

870

870

870

870

870870

870870

Single Base Unit•Full height door,one shelf

Double Sink Base UnitTwo full height doors,one shelf

Single Sink Base Unit•One door, dummy drawerone shelf


500 BU55F BU56F600 BU65F BU66F

1000 BU105F BU106F1200 BU125F BU126F

500 BU55DDD BU56DDD600 BU65DDD BU66DDD

Double Sink Base Unit*Drawer Line: two doors, one working drawer, one dummy drawer, one shelf

Double Sink Base UnitDrawer Line: two doors, two dummy drawers, one shelf

Pan Drawer Hob UnitOne dummy drawer, two pan drawers


1000 SU105D SU106D1200 SU125D SU126D

800 BU85DAI BU86DAI1000 SU105DAI SU106DAI1200 SU125DAI SU126DAI

600 N/A PD66D3DD

VISTA AND EXCEL SINK AND HOB UNITS WITHOUT SINKLINER

870

870870

870

870

Sink units are designed to support a sinktop or a worktop with an inset sink. The full length of a sit-on sinktop must be supported by units. Drainers of inset sinktops may be positioned over voids provided that the worktop is adequately supported. Please specify the drainer position of units marked*.•Single base units can be hinged left or right. Please specify when ordering.


Style A Style B Style C




800 500 CB85FA CB85DA800 600 CB86FA CB86DA


800 500 CB85FC CB85DC800 600 CB86FC CB86DC

Style A Style A Style B




900 600 CB96FA CB96DA 1000 500 CB105FA CB105DA1000 600 CB106FA CB106DA


1200mm CBU L-Shape CBU(Shelf Unit)


L-Shape CBU(Carousel Unit)





1200 500 CB125F CB125D1200 600 CB126F CB126D

930 X 930 LSB99F LSB99D 930 X 930 LCB99F LCB99D

Kubix’s range of corner base units allows wide fl exibility in the positioning of corner units for the clearance of water or soil vent pipes when required. Depending on the blanking panel/door combinations specifi ed, corner base units can be positioned 30mm, 130mm, 180mm, 230mm or 330mm from the return wall in order to join with either a 500mm or 600mm deep base unit. Please specify the handing of the blanking panel side when ordering. For an explanation of handing see page 4. NB: if utilising 500mm wide units the overall space required for the corner base unit will be reduced by 100mm. All dimensions in millimetres.

VISTA AND EXCEL CORNER BASE UNITS

400Door

1030

340Blank

230mm Gap

300Door

930

540Blank

130mm Gap

240Blank

500Door

1130

330mm Gap

500Door

1130

540Blank

130mm Gap

1030

400Door

540Blank

30mm Gap

450Door

930

180mm Gap

390Blank

600Door

1230

30mm Gap

600Blank

870

870

870


20 21

Single Wall Unit*One door, one shelf

Single Wall Unit•*One door, one shelf (Vista)One door, two shelves (Excel)

Single Wall Unit*One door, two shelves

WIDTH DEPTH° CODE WIDTH DEPTH° CODE WIDTH DEPTH° CODE

300 300 WU356400 300 WU456450 300 WU4556500 300 WU556600 300 WU656

300 300 WU372400 300 WU472450 300 WU4572500 300 WU572600 300 WU672

300 300 WU390400 300 WU490450 300 WU4590500 300 WU590600 300 WU690

Single Wall Unit – Lockable†*One door, one shelf

Single Wall Unit•* – Lockable†One door, one shelf (Vista)One door, two shelves (Excel)

Single Wall Unit – Lockable†*One door, two shelves


300 300 WU356LK400 300 WU456LK 450 300 WU4556LK500 300 WU556LK600 300 WU656LK


300 300 WU390LK400 300 WU490LK450 300 WU4590LK500 300 WU590LK600 300 WU690LK

Double Wall Unit Two doors, one shelf

Double Wall Unit•Two door, one shelf (Vista)Two door, two shelves (Excel)

Double Wall UnitTwo doors, two shelves


800 300 WU856900 300 WU9561000 300 WU1056

800 300 WU872900 300 WU9721000 300 WU1072

800 300 WU890900 300 WU9901000 300 WU1090

VISTA AND EXCEL WALL UNITS

* Single wall units can be hinged left or right. Please specify when ordering.† Lockable units available for a limited door offer only - locks can be ordered separately. See page 29. Not all handles are compatible with lockable units - please refer to your Symphony Representative for further details. • On 18mm Excel cabinet, two shelves.° Nominal depth including frontal.

561

561

561 724 900

724

724

900

900

561

561

900

724 900


Corner Wall UnitBlank end for corner return, one door, one shelf

Corner Wall Unit• Blank end for corner return, one door, one shelf

Corner Wall UnitBlank end for corner return, one door, two shelves

WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE

600 300 CWU656 600 300 CWU672 600 300 CWU690

Diagonal Corner Wall Unit*One door, one shelf

Diagonal Corner Wall Unit•* One door, one shelf

Diagonal Corner Wall Unit*One door, two shelves


630 630 DWU656(INC. 2 SPACER

PANELS)


PANELS)


PANELS

Open Diagonal Corner Wall Unit*One shelf

Open Diagonal Corner Wall Unit•* One shelf

Open Diagonal Corner Wall Unit•*Shelves


630 630 OWU656(INC. 2 SPACER

PANELS)


PANELS)


PANELS)

VISTA AND EXCEL CORNER WALL UNITS

Corner Wall Units should be placed 30mm from their return wall so that the total space occupied when measured from the return wall is 630mm.Handing for Corner Wall Units is the blank side. Diagonal Corner Wall Units are manufactured to 630mm in both directions, so no additional spacing is required.* Diagonal Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.• On 18mm Excel cabinet, two shelves.

724 900

561724



20 21

Single Wall Unit*One door, one shelf

Single Wall Unit•*One door, one shelf (Vista)One door, two shelves (Excel)

Single Wall Unit*One door, two shelves


300 300 WU356400 300 WU456450 300 WU4556500 300 WU556600 300 WU656

300 300 WU372400 300 WU472450 300 WU4572500 300 WU572600 300 WU672

300 300 WU390400 300 WU490450 300 WU4590500 300 WU590600 300 WU690

Single Wall Unit – Lockable†*One door, one shelf

Single Wall Unit•* – Lockable†One door, one shelf (Vista)One door, two shelves (Excel)

Single Wall Unit – Lockable†*One door, two shelves




300 300 WU390LK400 300 WU490LK450 300 WU4590LK500 300 WU590LK600 300 WU690LK


Double Wall Unit•Two door, one shelf (Vista)Two door, two shelves (Excel)



800 300 WU856900 300 WU9561000 300 WU1056

800 300 WU872900 300 WU9721000 300 WU1072

800 300 WU890900 300 WU9901000 300 WU1090

VISTA AND EXCEL WALL UNITS

* Single wall units can be hinged left or right. Please specify when ordering.† Lockable units available for a limited door offer only - locks can be ordered separately. See page 29. Not all handles are compatible with lockable units - please refer to your Symphony Representative for further details. • On 18mm Excel cabinet, two shelves.° Nominal depth including frontal.

561

561

561 724 900

724

724

900

900

561

561

900

724 900


Corner Wall UnitBlank end for corner return, one door, one shelf

Corner Wall Unit• Blank end for corner return, one door, one shelf

Corner Wall UnitBlank end for corner return, one door, two shelves


600 300 CWU656 600 300 CWU672 600 300 CWU690

Diagonal Corner Wall Unit*One door, one shelf

Diagonal Corner Wall Unit•* One door, one shelf

Diagonal Corner Wall Unit*One door, two shelves



PANELS)


PANELS)


PANELS

Open Diagonal Corner Wall Unit*One shelf

Open Diagonal Corner Wall Unit•* One shelf

Open Diagonal Corner Wall Unit•*Shelves



PANELS)


PANELS)


PANELS)

VISTA AND EXCEL CORNER WALL UNITS

Corner Wall Units should be placed 30mm from their return wall so that the total space occupied when measured from the return wall is 630mm.Handing for Corner Wall Units is the blank side. Diagonal Corner Wall Units are manufactured to 630mm in both directions, so no additional spacing is required.* Diagonal Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.• On 18mm Excel cabinet, two shelves.

724 900

561724



22 23

All dimensions in millimetres. All dimensions in millimetres.

VISTA AND EXCEL LARDER UNITS

Units can be hinged left or right. Please specify when ordering. For an explanation of handing see page 4.Pull-out larder unit cabinets are supplied assembled but wirework must be fi tted on site. • Supplied as 18mm Excel only.

Larder Unit Two doors, four shelves


Top door height: 1228Bottom door height: 896

WIDTH 300 DEEP 500 DEEP 600 DEEP WIDTH 300 DEEP 500 DEEP 600 DEEP

300 LU33• LU35 LU36500 – LU55 LU56600 – LU65 LU66

300 LU3323• – LU3623500 – LU5523 LU5623600 – LU6523 LU6623

Pull-out Larder Unit Pull-out frame/door


WIDTH 600 DEEP 600 DEEP SOFT CLOSE WIDTH 600 DEEP 600 DEEP SOFT CLOSE

300 PL36 WPL36 300 DL3623 WPL3623

2100

22762100

Please note: Follow the appliance manufacturer’s recommendations for the distance between the worktop and the cooker hood.

Over Cooker Hood Unit One lift-up door

Door Front for Integrated Cooker Hood

WIDTH DEPTH CODE WIDTH CODE

600 300 OCH63 600 DRICASS

VISTA AND EXCEL OVER COOKER HOOD UNITS

300 450

2276

930 724

Please ask your local Symphony representative for details of the most suitable housing or contact the Building Division Sales Offi ce on 01226 446000.

Wall Boiler Housing Assembled (15mm Vista only)

Wall Boiler Housing Ready for assembly

Dresser Boiler HousingAssembled

WIDTH DEPTH CODE WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE

600 400 BH69 600 400 KBHC672 (CABINET) DRW26ASS (DOOR)

1190 600 400 BH61366 600 400 BH6131560 600 400 BH615

VISTA AND EXCEL BOILER HOUSINGS

1228 door

1228 door

1228 door

1228 door

720 door

720 door

896 door

896 door

VISTA AND EXCEL BROOM UNITS

Units can be hinged left or right. Please specify when ordering.

Broom Unit Two doors, three shelves

Recommended WU Height: 724mm

Broom Unit Two doors, four shelves


WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP

300 BR35 BR36500 BR55 BR56600 BR65 BR66

300 – BR3623 500 BR5523 BR5623 600 BR6523 BR6623

22762100

1128 door 1228 door

720 door 896 door

Oven Housing*Suffix depending on theappliance type and doorconfiguration

Integrated Housing*Suffix depending on the appliance type and door configuration

HEIGHT WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE

2100 600 600 OH66*2276 600 600 OH6623*

2100 600 600 IF66*2276 600 600 IF6623*

VISTA AND EXCEL APPLIANCE HOUSING VISTA AND EXCEL INTEGRATED HOUSING

Symphony can supply integrated housings to accommodate a wide selection of built-in appliances. For appliances not supplied by Symphony, please make sure sizes are checked before ordering. The appliance manufacturer and the model number must be specifi ed when ordering. Units can be hinged left or right. If not specifi ed, refrigeration housings will be supplied right hand hinged and oven housings left hand hinged.


22 23


VISTA AND EXCEL LARDER UNITS

Units can be hinged left or right. Please specify when ordering. For an explanation of handing see page 4.Pull-out larder unit cabinets are supplied assembled but wirework must be fi tted on site. • Supplied as 18mm Excel only.



Top door height: 1228Bottom door height: 896

WIDTH 300 DEEP 500 DEEP 600 DEEP WIDTH 300 DEEP 500 DEEP 600 DEEP

300 LU33• LU35 LU36500 – LU55 LU56600 – LU65 LU66

300 LU3323• – LU3623500 – LU5523 LU5623600 – LU6523 LU6623



WIDTH 600 DEEP 600 DEEP SOFT CLOSE WIDTH 600 DEEP 600 DEEP SOFT CLOSE

300 PL36 WPL36 300 DL3623 WPL3623

2100

22762100

Please note: Follow the appliance manufacturer’s recommendations for the distance between the worktop and the cooker hood.

Over Cooker Hood Unit One lift-up door

Door Front for Integrated Cooker Hood

WIDTH DEPTH CODE WIDTH CODE

600 300 OCH63 600 DRICASS

VISTA AND EXCEL OVER COOKER HOOD UNITS

300 450

2276

930 724

Please ask your local Symphony representative for details of the most suitable housing or contact the Building Division Sales Offi ce on 01226 446000.

Wall Boiler Housing Assembled (15mm Vista only)

Wall Boiler Housing Ready for assembly

Dresser Boiler HousingAssembled

WIDTH DEPTH CODE WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE

600 400 BH69 600 400 KBHC672 (CABINET) DRW26ASS (DOOR)

1190 600 400 BH61366 600 400 BH6131560 600 400 BH615

VISTA AND EXCEL BOILER HOUSINGS

1228 door

1228 door

1228 door

1228 door

720 door

720 door

896 door

896 door

VISTA AND EXCEL BROOM UNITS

Units can be hinged left or right. Please specify when ordering.



Broom Unit Two doors, four shelves



300 BR35 BR36500 BR55 BR56600 BR65 BR66

300 – BR3623 500 BR5523 BR5623 600 BR6523 BR6623

22762100

1128 door 1228 door

720 door 896 door

Oven Housing*Suffix depending on theappliance type and doorconfiguration

Integrated Housing*Suffix depending on the appliance type and door configuration

HEIGHT WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE

2100 600 600 OH66*2276 600 600 OH6623*

2100 600 600 IF66*2276 600 600 IF6623*

VISTA AND EXCEL APPLIANCE HOUSING VISTA AND EXCEL INTEGRATED HOUSING

Symphony can supply integrated housings to accommodate a wide selection of built-in appliances. For appliances not supplied by Symphony, please make sure sizes are checked before ordering. The appliance manufacturer and the model number must be specifi ed when ordering. Units can be hinged left or right. If not specifi ed, refrigeration housings will be supplied right hand hinged and oven housings left hand hinged.


24 25

* Corner Wall Units should be placed 30mm from their return wall so that the total space occupied when measured from the return wall is 630mm. Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.** Diagonal Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.Δ Not available in 18mm Excel Ready For Assembly offer. † Only available in 18mm Excel Ready For Assembly offer.• On 18mm Excel cabinet, two shelves.

Single Wall Unit One door, one shelf

Single Wall Unit• One door, one shelf (Vista)One door, two shelves (Excel)

Single Wall Unit One door, two shelves


300 300 WU356400 300 WU456500 300 WU556600 300 WU656

300 300 WU372400 300 WU472500 300 WU572600 300 WU672

300 300 WU390†400 300 WU490†500 300 WU590†600 300 WU690†


Double Wall Unit• Two door, one shelf (Vista)Two door, two shelves (Excel)



800 300 WU856900 300 WU9561000 300 WU1056

800 300 WU872†900 300 WU972†1000 300 WU1072†

800 300 WU890†900 300 WU990†1000 300 WU1090†

Corner Wall Unit*One door, one shelfone blanking panel900 = two shelves

Diagonal Corner Wall Unit** One door, one shelf (Vista)One door, two shelves (Excel)

Over Cooker Hood UnitOne lift up door

HEIGHT WIDTH DEPTH CODE WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE

561 600 300 CWU656724 600 300 CWU672900 600 300 CWU690†

630 630 DWU656 300 600 300 OCH63

VISTA AND EXCEL READY FOR ASSEMBLY

2100

1228 Door

720 Door

1228 Door

720 Door

2100

900561 724

900561 724

561300



Top door height 1228 Top door height 1228

Bottom door height 720 Bottom door height 720


500 BR55Δ BR56Δ 500 LU55Δ LU56

WALL UNITS

TALL UNITS


Single Base UnitFull height door:one door, one shelf

Single Base UnitDrawer Line:One door, one drawer, one shelf





400 N/A DU46D† 500 DU55D DU56D600 N/A DU66D†

Double Base Unit Full height door:two doors, one shelf

Double Base UnitDrawer Line:Two doors, two drawers,one shelf

Double Sink Base UnitDrawer Line:Two doors, one working drawer,one dummy drawer, one shelf


800 BU85F BU86F900 N/A BU96F1000 BU105F BU106F


1000 SU105D SU106D1200 SU125D SU126D


870 870


† Only available in 18mm Excel Ready For Assembly offer.

Corner Base UnitOne door, one shelf Style A(1000mm wide shown)

Corner Base Unit L-Shape Corner Base Unit(Carousel Unit)


WIDTH SIZE FULL HEIGHT DRAWER DOOR LINE


800 600 CB86FA CB86DA†900 600 CB96FA CB96DA†1000 500 CB105FA CB105D1000 600 CB106FA CB106DA

870 930 X 930 LSB99F LSB99D† 870 930 X 930 LCB99F LCB99D†

500Door

1130

540Blank

130mm Gap

BASE UNITS

CORNER BASE UNITS

870

870 870870


24 25

* Corner Wall Units should be placed 30mm from their return wall so that the total space occupied when measured from the return wall is 630mm. Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.** Diagonal Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.Δ Not available in 18mm Excel Ready For Assembly offer. † Only available in 18mm Excel Ready For Assembly offer.• On 18mm Excel cabinet, two shelves.

Single Wall Unit One door, one shelf

Single Wall Unit• One door, one shelf (Vista)One door, two shelves (Excel)

Single Wall Unit One door, two shelves


300 300 WU356400 300 WU456500 300 WU556600 300 WU656

300 300 WU372400 300 WU472500 300 WU572600 300 WU672

300 300 WU390†400 300 WU490†500 300 WU590†600 300 WU690†


Double Wall Unit• Two door, one shelf (Vista)Two door, two shelves (Excel)



800 300 WU856900 300 WU9561000 300 WU1056

800 300 WU872†900 300 WU972†1000 300 WU1072†

800 300 WU890†900 300 WU990†1000 300 WU1090†

Corner Wall Unit*One door, one shelfone blanking panel900 = two shelves

Diagonal Corner Wall Unit** One door, one shelf (Vista)One door, two shelves (Excel)

Over Cooker Hood UnitOne lift up door

HEIGHT WIDTH DEPTH CODE WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE

561 600 300 CWU656724 600 300 CWU672900 600 300 CWU690†

630 630 DWU656 300 600 300 OCH63


2100

1228 Door

720 Door

1228 Door

720 Door

2100

900561 724

900561 724

561300



Top door height 1228 Top door height 1228

Bottom door height 720 Bottom door height 720


500 BR55Δ BR56Δ 500 LU55Δ LU56

WALL UNITS

TALL UNITS


Single Base UnitFull height door:one door, one shelf

Single Base UnitDrawer Line:One door, one drawer, one shelf





400 N/A DU46D† 500 DU55D DU56D600 N/A DU66D†

Double Base Unit Full height door:two doors, one shelf

Double Base UnitDrawer Line:Two doors, two drawers,one shelf

Double Sink Base UnitDrawer Line:Two doors, one working drawer,one dummy drawer, one shelf


800 BU85F BU86F900 N/A BU96F1000 BU105F BU106F


1000 SU105D SU106D1200 SU125D SU126D


870 870


† Only available in 18mm Excel Ready For Assembly offer.

Corner Base UnitOne door, one shelf Style A(1000mm wide shown)

Corner Base Unit L-Shape Corner Base Unit(Carousel Unit)




800 600 CB86FA CB86DA†900 600 CB96FA CB96DA†1000 500 CB105FA CB105D1000 600 CB106FA CB106DA

870 930 X 930 LSB99F LSB99D† 870 930 X 930 LCB99F LCB99D†

500Door

1130

540Blank

130mm Gap

BASE UNITS

CORNER BASE UNITS

870

870 870870


26 27

Larder Unit4 Shelves

Broom Unit3 Shelves2 Cut Back

Oven Housing Unit*Depending on the appliance type and door configuration

CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE

0.25 300 600 LU36

0.44 500 600 LU56

0.52 600 600 LU66

0.25 300 600 BR36

0.44 500 600 BR56

0.52 600 600 BR66

0.54 600 600 OH665*

Oven Housing UnitOne wirework basketand one metal sided basket

Fridge Housing Unit*Depending on the appliance type and door configuration

Larder Unit


0.54 600 600 OH662G 0.54 600 600 IF66A*

0.54 600 600 IF66B*

0.54 600 600 IF66C*

0.54 600 600 IF66D*

0.32 500 600 LU5613

Single oven housing Single Oven & Microwave Housing

Double Oven Housing

72 Fascia296 Pull-out Drawer


0.33 600 600 SOH6613 0.33 600 600 SOH6613A 0.33 600 600 DOH6613

Appliance Housing Microwave Housing

CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE

0.33 600 600 IF6613 0.33 600 600 MOH6613D3

ESPRIT RANGE CONTENT

2100

2100

2100

2100

2100

1381

1381

1381

1381

1381

1381

1228 Door

450 Door

1228 Door72 Fascia

1228 Door

720 Door

450 Pull-out Drawer

720 Door

72 Fascia

930 Door

47 Fascia

159 Drawer

276 Drawer

276 Drawer

72 Fascia 72 Fascia

72 Fascia

296 Pull-out Drawer120 Fascia557 Door

296 Pull-out Drawer


Base UnitOne door, one shelf

Drawer UnitThree drawers

Pan Drawer Unit2 drawers

C/CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE

0.07 300 600 DBU356

0.10 400 600 DBU456

0.11 450 600 DBU4556

0.12 500 600 DBU556

0.15 600 600 DBU656

0.07 400 600 DDU456

0.12 500 600 DDU556

0.15 600 600 DDU656

0.10 600 600 PDU656

Full Height CornerBase Unit No corner post. Includes half carousel baskets

Full Height CornerBase UnitWith corner post.Includes half carousel baskets

Trolley Unitavailable in white only

CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE WIDTH DEPTH CODE

0.25 1000 600 DCB1056A 0.25 1000 600 DCB1056B 500 500 DTU55

Wall Unit

Open Diagonal Corner Wall Unit Frontal Integrated Hood

CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE WIDTH CODE

0.05 300 325 DDWU372

0.07 400 325 DDWU472

0.08 450 325 DDWU4572

0.08 500 325 DDWU572

0.10 600 325 DDWU672

0.19 630 630 DOWU672 600 DRICASS

Tambour Larder Unit 1235mmroll down door

WIDTH CODE

500 TLU5613SL


561 561

500561

724

561

561

724 450


26 27

Larder Unit4 Shelves

Broom Unit3 Shelves2 Cut Back

Oven Housing Unit*Depending on the appliance type and door configuration


0.25 300 600 LU360.44 500 600 LU560.52 600 600 LU66

0.25 300 600 BR360.44 500 600 BR560.52 600 600 BR66

0.54 600 600 OH665*

Oven Housing UnitOne wirework basketand one metal sided basket

Fridge Housing Unit*Depending on the appliance type and door configuration

Larder Unit


0.54 600 600 OH662G 0.54 600 600 IF66A*0.54 600 600 IF66B*0.54 600 600 IF66C*0.54 600 600 IF66D*

0.32 500 600 LU5613

Single oven housing Single Oven & Microwave Housing

Double Oven Housing

72 Fascia296 Pull-out Drawer


0.33 600 600 SOH6613 0.33 600 600 SOH6613A 0.33 600 600 DOH6613

Appliance Housing Microwave Housing

CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE

0.33 600 600 IF6613 0.33 600 600 MOH6613D3


2100

2100

2100

2100

2100

1381

1381

1381

1381

1381

1381

1228 Door

450 Door

1228 Door72 Fascia

1228 Door

720 Door

450 Pull-out Drawer

720 Door

72 Fascia

930 Door

47 Fascia

159 Drawer

276 Drawer

276 Drawer

72 Fascia 72 Fascia

72 Fascia

296 Pull-out Drawer120 Fascia557 Door

296 Pull-out Drawer


Base UnitOne door, one shelf

Drawer UnitThree drawers

Pan Drawer Unit2 drawers

C/CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE

0.07 300 600 DBU3560.10 400 600 DBU4560.11 450 600 DBU45560.12 500 600 DBU5560.15 600 600 DBU656

0.07 400 600 DDU4560.12 500 600 DDU5560.15 600 600 DDU656

0.10 600 600 PDU656

Full Height CornerBase Unit No corner post. Includes half carousel baskets

Full Height CornerBase UnitWith corner post.Includes half carousel baskets

Trolley Unitavailable in white only

CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE WIDTH DEPTH CODE

0.25 1000 600 DCB1056A 0.25 1000 600 DCB1056B 500 500 DTU55

Wall Unit

Open Diagonal Corner Wall Unit Frontal Integrated Hood

CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE WIDTH CODE

0.05 300 325 DDWU3720.07 400 325 DDWU4720.08 450 325 DDWU45720.08 500 325 DDWU5720.10 600 325 DDWU672

0.19 630 630 DOWU672 600 DRICASS

Tambour Larder Unit 1235mmroll down door

WIDTH CODE

500 TLU5613SL


561 561

500561

724

561

561

724 450


28 29

Pull Down Basket To fit 500mm wide units only110° Hinges only

Single Tier Bottle RackTo fit 500mm or 600mm wide units

Two Tier Bottle Rack To fit 500mm or 600mm wide units

CODE CODE CODE

SPRINGBASKCX DOORBASKCH DOORBASKTCH

1/2 Carousel Baskets Pair. Can be fitted to 1000mm (500 door) or 1200mm (600 door) corner base

3/4 CarouselCan be fitted to ‘L’ shape corner base

Cutlery TrayTo fit 500mm drawersSupplied in Euro beige colour (433mm x 420mm)*Does not fit Esprit drawers

CODE CODE CODE

CAROBASKCH CAROBASKCX CTRAYSUPR5V

Space Saving Triple Waste Bin

(400mm Unit only)1 x 20 litres 2 x 10 litresDo not use with 170˚ hinge

Eco-bin

Recycling Waste Bin(500/600 Unit only)1 x 19 litres, 1 x 12 litres, 1 x 9 litreDo not use with 170˚ hinge

60 Litre Eco Bin (600mm unit only)1 x 30 litres2 x 15 litres

Lock Lock for lockable units and Strike Plate

What Lock Magnetic Lock System2 x locks per pack

CODE CODE CODE DESCRIPTION CODE CODE

ECOBIN4 RECYCLEBIN ECOBIN60L LOCK for lockable units LOCKSTRIKE PLATE LOCKSTRKPLT

MAGLOCK

ACCESSORIES

100 410

100

390

390

850mm diameter 700mm diameter

Double Towel Rail(Annodised plastic)

Swing BinDeluxe chrome bin 12 litres(to fit 400mm unit minimum)

Worktop Support LegsSupplied at 870mm high for worktopsInstallers can reduce on site to table height

CODE CODE CODE

TRAIL SWINGBINCH CHRLEG (CHROME) (25 DIA.)LEGBAR (WHITE) (60 DIA.)

Rehang Hingeplate

Hinge Repair Kit

Universal Sink Liner

(15mm and 18mm cabinets)

Triple Waste Bin (300mm Unit only)3 x 10 litresDo not use with 170˚ hinge

CODE WIDTH CODE CODE

HINGEREP2 (PACK OF 2)HINGEREP12 (PACK OF 12)

500 SU5LINER600 SU6LINER800 SU8LINER900 SU9LINER1000 SU10LINER1200 SU12LINER

ECOBIN3X10

Internal accessories require assembly on site. All are supplied with necessary fi tting pack.

100

MFC Block End Support Panel For use when extending worktops over appliances, etc.

MFC Tray Platform 720 MFC Base/Wall Spacer Panel 15mm

HEIGHT WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH CODE

870 570 15 ES687P920 650 18 EP6592P

300 570 TSP3X6P 300 BSP372P

Modern Tangent MDF Cornice

Modern Tangent MDF Pelmet

Universal Cornice And Pelmet MDF

LENGTH CODE LENGTH CODE LENGTH CODE

3000 CORT30P 3000 UPST30P 3000 CORPEL30

15mm cabinet

18mm cabinet

DESCRIPTION CODE DESCRIPTION CODE

BASE UNIT CPOSTBU560 WALL UNIT CPOSTSWU56720 WALL UNIT CPOSTTWU72900 WALL UNIT CPOSTTWU90

BASE UNIT LPOSTCBU18560 WALL UNIT LPOSTWU5618720 WALL UNIT LPOSTWU7218900 WALL UNIT LPOSTWU9018

MFC Continuous Plinth Supplied separate from units

Continuous Plinth

Available in white and pear

900 MFC Base/WallSpacer Panel 15mm

HEIGHT WIDTH CODE HEIGHT WIDTH CODE HEIGHT WIDTH CODE

142 2600 CONPLINTH200 2600 CONPLINTH262200 650 RET PLINTH652

142 2600 CONPLINTHMR (MOISTURE RESISTANT)

900 300 BSP390P

Plinth Connector Bracket(Use with continuous plinth)

High Plinth Bracket

CODE WIDTH CODE

BRKPLINTH 200 BRKPLINTH200

BACK, END, FILLER AND BLENDER PANELS

CORNICE AND PELMET

CORNER POSTS

MR


45

mm

35

mm

55

mm

720


28 29

Pull Down Basket To fit 500mm wide units only110° Hinges only

Single Tier Bottle RackTo fit 500mm or 600mm wide units

Two Tier Bottle Rack To fit 500mm or 600mm wide units

CODE CODE CODE

SPRINGBASKCX DOORBASKCH DOORBASKTCH

1/2 Carousel Baskets Pair. Can be fitted to 1000mm (500 door) or 1200mm (600 door) corner base

3/4 CarouselCan be fitted to ‘L’ shape corner base

Cutlery TrayTo fit 500mm drawersSupplied in Euro beige colour (433mm x 420mm)*Does not fit Esprit drawers

CODE CODE CODE

CAROBASKCH CAROBASKCX CTRAYSUPR5V

Space Saving Triple Waste Bin

(400mm Unit only)1 x 20 litres 2 x 10 litresDo not use with 170˚ hinge

Eco-bin

Recycling Waste Bin(500/600 Unit only)1 x 19 litres, 1 x 12 litres, 1 x 9 litreDo not use with 170˚ hinge

60 Litre Eco Bin (600mm unit only)1 x 30 litres2 x 15 litres

Lock Lock for lockable units and Strike Plate

What Lock Magnetic Lock System2 x locks per pack

CODE CODE CODE DESCRIPTION CODE CODE

ECOBIN4 RECYCLEBIN ECOBIN60L LOCK for lockable units LOCKSTRIKE PLATE LOCKSTRKPLT

MAGLOCK

ACCESSORIES

100 410

100

390

390

850mm diameter 700mm diameter

Double Towel Rail(Annodised plastic)

Swing BinDeluxe chrome bin 12 litres(to fit 400mm unit minimum)

Worktop Support LegsSupplied at 870mm high for worktopsInstallers can reduce on site to table height

CODE CODE CODE

TRAIL SWINGBINCH CHRLEG (CHROME) (25 DIA.)LEGBAR (WHITE) (60 DIA.)

Rehang Hingeplate

Hinge Repair Kit

Universal Sink Liner

(15mm and 18mm cabinets)

Triple Waste Bin (300mm Unit only)3 x 10 litresDo not use with 170˚ hinge

CODE WIDTH CODE CODE

HINGEREP2 (PACK OF 2)HINGEREP12 (PACK OF 12)

500 SU5LINER600 SU6LINER800 SU8LINER900 SU9LINER1000 SU10LINER1200 SU12LINER

ECOBIN3X10

Internal accessories require assembly on site. All are supplied with necessary fi tting pack.

100

MFC Block End Support Panel For use when extending worktops over appliances, etc.

MFC Tray Platform 720 MFC Base/Wall Spacer Panel 15mm

HEIGHT WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH CODE

870 570 15 ES687P920 650 18 EP6592P

300 570 TSP3X6P 300 BSP372P

Modern Tangent MDF Cornice

Modern Tangent MDF Pelmet

Universal Cornice And Pelmet MDF

LENGTH CODE LENGTH CODE LENGTH CODE

3000 CORT30P 3000 UPST30P 3000 CORPEL30

15mm cabinet

18mm cabinet

DESCRIPTION CODE DESCRIPTION CODE

BASE UNIT CPOSTBU560 WALL UNIT CPOSTSWU56720 WALL UNIT CPOSTTWU72900 WALL UNIT CPOSTTWU90

BASE UNIT LPOSTCBU18560 WALL UNIT LPOSTWU5618720 WALL UNIT LPOSTWU7218900 WALL UNIT LPOSTWU9018

MFC Continuous Plinth Supplied separate from units

Continuous Plinth

Available in white and pear

900 MFC Base/WallSpacer Panel 15mm

HEIGHT WIDTH CODE HEIGHT WIDTH CODE HEIGHT WIDTH CODE

142 2600 CONPLINTH200 2600 CONPLINTH262200 650 RET PLINTH652

142 2600 CONPLINTHMR (MOISTURE RESISTANT)

900 300 BSP390P

Plinth Connector Bracket(Use with continuous plinth)

High Plinth Bracket

CODE WIDTH CODE

BRKPLINTH 200 BRKPLINTH200

BACK, END, FILLER AND BLENDER PANELS

CORNICE AND PELMET

CORNER POSTS

MR


45

mm

35

mm

55

mm

720


30 31

Electronic Wall Unit SystemMounting frame with safety step.Order wall units separately toequal width of 1500mm

Electronic Worktop SystemElectrical vertical up and down adjustments with safety stop . Order worktop (min 950, max 1950) and worktop fascia panel (DPF18) separately.

Cranked Worktop SystemManual vertical up and down adjustments with aluminium handle. Order worktop (min 950, max 1950) and worktop fascia panel (DPF18) separately.

WIDTH CODE WIDTH CODE WIDTH CODE

1500 ROPOXMFRAME 1950 ELEHYWTSYS2 1950 CRKHYWTSYS2

HD Spot Light Can be surface or recessed fitting. Order driver LEDHDTFORM6 or LEDHDDIMMER separately

Power: 1.65w

HD square LightSurface fitting only. Order driver LEDHDTFORM6 or LEDHDDIMMER separately

Power: 1.25w

Hd Over Cabinet LightOrder driver LEDHDTFORM6 or LEDHDDIMMER separately

Power: 1.65w

CODE CODE CODE

LEDSURFHD LEDSQSURFHD LEDCORHD

HD 24v Driver with remote control on/off & dimming functionCannot be used with HD LEDDELTAHDS. Combined wattage of connected lights must not exceed driver wattage. 12 way output.

Power: 240v / 30w

Touch sensor - On/Off control / Door SensorTwo functions - use as touch on/off switch or behind a cupboard door to activate internal lighting. Cannot be used with lights with built in sensor. Use only with LEDHDTFORM6 driver

CODE CODE

LEDHDDIMMER LEDSWITCH

250mm LED Task strip lightIncludes 1m mains connection lead and clips for fitting. Each light can be linked together or with optional link cable. No driver required.

Power: 240v / 2.7w


Power: 240v / 4.5w


Power: 240v / 8w

500mm Light link cableUse to link one LED task strip to another

CODE CODE CODE CODE

LEDSTRIP25 LEDSTRIP33 LEDSTRIP55 LEDSTRIPCON

GX53 LED LightStainless steel. Surface or recessed fitting. Driver not required, connects directly to mains source.

Power: 240v / 1.65w

GX53 LED BulbReplacement GX53 LED light fitting

Power: 240v / 1.65w

CODE CODE

LEDSURFACE LEDREPBULB

Hd Delta Light Order driver LEDHDTFORM6 or LEDHDDIMMER separately

Power: 1.65w

HD square LightBuilt in on/off sensor. Can also switch up to two non sensor HD lights. Order driver LEDHDTFORM6 separately

Power: 2.15w

HD 24v DriverUse to power any combination of HD lights. Combined wattage of connected lights must not exceed driver wattage. 6 way output.

Power: 240v / 15w

CODE CODE CODE

LEDDELTAHD LEDDELTAHDS LEDHDTFORM6

LIGHTING HD LED LIGHT RANGE

LIGHTING TASK LED STRIP LIGHT RANGE

LIGHTING LED SURFACE LIGHT RANGE

Example

Example

Either standard driver or remote control driver can be used

HD Delta light with touch sensor can switch on/off up to two non-sensor HD lights. Can be used with standard driver only

Optional Touch Sensor can be used with standard driver

Example

Additional lights can also be connected via optional 500mm link cable

Additional lights can be connected directly in series

No driver required. Connects directly to mains source

Worktop Fascia Panel L-Shaped Worktop Bracket Unit Wall Support Bracket

WIDTH CODE CODE WIDTH CODE

1800 DPF18 BRKTWTOPDIS 1000 DSPLT

Pull Down BasketFor easy access to wall units110° Hinges only

Laminate Splashback Revo Aluminium Cutlery Tray

WIDTH CODE DESCRIPTION CODE WIDTH DEPTH CODE

500 SPRINGBASKCX 2440 X 600 WTSB24X6HI DEF - 2440 X 600 WTHDSB24X62440 X 1200 WTSB24X12HI DEF - 2440 X 1200 WTHDSB24X12END CAP WTSBACKENDBUTT JOINT WTSBACKBUTCORNER JOINT WTSBACKCNR

400 500 CTRAYGALL4V500 500 CTRAYGALL5V600 500 CTRAYGALL6V

ESPRIT ACCESSORIES

112



30 31

Electronic Wall Unit SystemMounting frame with safety step.Order wall units separately toequal width of 1500mm

Electronic Worktop SystemElectrical vertical up and down adjustments with safety stop . Order worktop (min 950, max 1950) and worktop fascia panel (DPF18) separately.

Cranked Worktop SystemManual vertical up and down adjustments with aluminium handle. Order worktop (min 950, max 1950) and worktop fascia panel (DPF18) separately.

WIDTH CODE WIDTH CODE WIDTH CODE

1500 ROPOXMFRAME 1950 ELEHYWTSYS2 1950 CRKHYWTSYS2

HD Spot Light Can be surface or recessed fitting. Order driver LEDHDTFORM6 or LEDHDDIMMER separately

Power: 1.65w

HD square LightSurface fitting only. Order driver LEDHDTFORM6 or LEDHDDIMMER separately

Power: 1.25w

Hd Over Cabinet LightOrder driver LEDHDTFORM6 or LEDHDDIMMER separately

Power: 1.65w

CODE CODE CODE

LEDSURFHD LEDSQSURFHD LEDCORHD

HD 24v Driver with remote control on/off & dimming functionCannot be used with HD LEDDELTAHDS. Combined wattage of connected lights must not exceed driver wattage. 12 way output.

Power: 240v / 30w

Touch sensor - On/Off control / Door SensorTwo functions - use as touch on/off switch or behind a cupboard door to activate internal lighting. Cannot be used with lights with built in sensor. Use only with LEDHDTFORM6 driver

CODE CODE

LEDHDDIMMER LEDSWITCH


Power: 240v / 2.7w


Power: 240v / 4.5w


Power: 240v / 8w

500mm Light link cableUse to link one LED task strip to another

CODE CODE CODE CODE

LEDSTRIP25 LEDSTRIP33 LEDSTRIP55 LEDSTRIPCON

GX53 LED LightStainless steel. Surface or recessed fitting. Driver not required, connects directly to mains source.

Power: 240v / 1.65w

GX53 LED BulbReplacement GX53 LED light fitting

Power: 240v / 1.65w

CODE CODE

LEDSURFACE LEDREPBULB

Hd Delta Light Order driver LEDHDTFORM6 or LEDHDDIMMER separately

Power: 1.65w

HD square LightBuilt in on/off sensor. Can also switch up to two non sensor HD lights. Order driver LEDHDTFORM6 separately

Power: 2.15w

HD 24v DriverUse to power any combination of HD lights. Combined wattage of connected lights must not exceed driver wattage. 6 way output.

Power: 240v / 15w

CODE CODE CODE

LEDDELTAHD LEDDELTAHDS LEDHDTFORM6

LIGHTING HD LED LIGHT RANGE

LIGHTING TASK LED STRIP LIGHT RANGE

LIGHTING LED SURFACE LIGHT RANGE

Example

Example

Either standard driver or remote control driver can be used

HD Delta light with touch sensor can switch on/off up to two non-sensor HD lights. Can be used with standard driver only

Optional Touch Sensor can be used with standard driver

Example

Additional lights can also be connected via optional 500mm link cable

Additional lights can be connected directly in series

No driver required. Connects directly to mains source

Worktop Fascia Panel L-Shaped Worktop Bracket Unit Wall Support Bracket

WIDTH CODE CODE WIDTH CODE

1800 DPF18 BRKTWTOPDIS 1000 DSPLT

Pull Down BasketFor easy access to wall units110° Hinges only

Laminate Splashback Revo Aluminium Cutlery Tray

WIDTH CODE DESCRIPTION CODE WIDTH DEPTH CODE

500 SPRINGBASKCX 2440 X 600 WTSB24X6HI DEF - 2440 X 600 WTHDSB24X62440 X 1200 WTSB24X12HI DEF - 2440 X 1200 WTHDSB24X12END CAP WTSBACKENDBUTT JOINT WTSBACKBUTCORNER JOINT WTSBACKCNR

400 500 CTRAYGALL4V500 500 CTRAYGALL5V600 500 CTRAYGALL6V

ESPRIT ACCESSORIES

112



32 33

WORKTOPS

Bullnose Worktops Bullnose Worktops Double Bullnose Worktops Double Bullnose Worktops

Depth: up to 600mm Max Length: 3500mm Depth: 601-870mm Max Length: 2950mm


Depth: 665 or 900mm Max Length: 3000mm

Depth: 665mm Max Length: 4000mm Depth: 900mm Max Length: 3600mm

THICKNESS CODE THICKNESS CODE THICKNESS CODE THICKNESS CODE

30MM PF30 40MM PF40 30MM DP30 40MM DP40

WORKTOP JOINTING STRIP AND END

L-Shape Worktop Joint Strip T-Shape Worktop Joint Strip

To join two worktops together to form a corner L-shape (600 deep) To butt two lengths of worktops together (600 deep)

THICKNESS COLOUR CODE THICKNESS COLOUR CODE

30MM ALUMINIUM STRIPALP30640MM BLACK, BROWN, STRIPALP4010 ALUMINIUM

30MM ALUMINIUM STRIPALT30640MM BLACK, BROWN, STRIPALT4010 ALUMINIUM

End Caps Tileguard Aluminium Tiling Strip

(600 deep)

(Supplied in 3m lengths)

THICKNESS COLOUR CODE THICKNESS CODE

30MM ALUMINIUM STRIPALS30640MM BLACK, BROWN, STRIPALS4010 ALUMINIUM

30MM TILESTRIP3040MM TILESTRIP40

A bolt pack can be ordered to facilitate site assembly of joints. Code MASONPACK

R 60

R 6

14mm

27.5mm

0.5mm

R 6

1

2

3

6

9

7

4

5

30MM

38

mm

Co

re 1

8

4

5

2

6

9

3

40MM

1. High pressure decorative laminate for extra impact & wear resistance, manufactured to BS EN 438.

2. Chipboard manufactured to BS EN 312 Part 3, P2 Grade.

3. Back edges are sealed by wax impregnation coating, for maximum protection against moisture.

4. Front edge bullnosed with a wrap under laminate to offer a drip barrier against water ingress.

5. Rebated underside on the front edge with a polyurethane resin applied as a moisture barrier.

6. Resin impregnated backing paper to resist moisture and prevent warping.

7. 30mm has a 6mm radius topand bottom.


9. Moisture resistant option manufactured to BS EN 312 Part 3, P3 Grade.

BULLNOSE WORKTOPS

MASON MITRE JOINTS

Worktops can also be supplied with a

factory cut mitred joint and jointing bolts

for assembly on site.

WORKTOP MASON MITRE PLANNER

600mm deep – 4000mm max. length.

Double postformed up to


Please allow an extra 23mm for male to

female connections and an extra 30mm for

corner post situations.

WORKTOP MASON MITRE PLANNER 650MM DEEP




Can be used in conjunction with 600mm

deep mitres.

WORKTOP RADIUS END DIAGRAM

Maximum length for double postformed up

to 900mm deep – 4000mm. Current radius

end variations.

31



32 33

WORKTOPS

Bullnose Worktops Bullnose Worktops Double Bullnose Worktops Double Bullnose Worktops



Depth: 665 or 900mm Max Length: 3000mm

Depth: 665mm Max Length: 4000mm Depth: 900mm Max Length: 3600mm

THICKNESS CODE THICKNESS CODE THICKNESS CODE THICKNESS CODE

30MM PF30 40MM PF40 30MM DP30 40MM DP40

WORKTOP JOINTING STRIP AND END

L-Shape Worktop Joint Strip T-Shape Worktop Joint Strip

To join two worktops together to form a corner L-shape (600 deep) To butt two lengths of worktops together (600 deep)

THICKNESS COLOUR CODE THICKNESS COLOUR CODE

30MM ALUMINIUM STRIPALP30640MM BLACK, BROWN, STRIPALP4010 ALUMINIUM

30MM ALUMINIUM STRIPALT30640MM BLACK, BROWN, STRIPALT4010 ALUMINIUM

End Caps Tileguard Aluminium Tiling Strip

(600 deep)

(Supplied in 3m lengths)

THICKNESS COLOUR CODE THICKNESS CODE

30MM ALUMINIUM STRIPALS30640MM BLACK, BROWN, STRIPALS4010 ALUMINIUM

30MM TILESTRIP3040MM TILESTRIP40

A bolt pack can be ordered to facilitate site assembly of joints. Code MASONPACK

R 60

R 6

14mm

27.5mm

0.5mm

R 6

1

2

3

6

9

7

4

5

30MM

38

mm

Co

re 1

8

4

5

2

6

9

3

40MM

1. High pressure decorative laminate for extra impact & wear resistance, manufactured to BS EN 438.

2. Chipboard manufactured to BS EN 312 Part 3, P2 Grade.

3. Back edges are sealed by wax impregnation coating, for maximum protection against moisture.

4. Front edge bullnosed with a wrap under laminate to offer a drip barrier against water ingress.

5. Rebated underside on the front edge with a polyurethane resin applied as a moisture barrier.

6. Resin impregnated backing paper to resist moisture and prevent warping.



9. Moisture resistant option manufactured to BS EN 312 Part 3, P3 Grade.

BULLNOSE WORKTOPS

MASON MITRE JOINTS

Worktops can also be supplied with a

factory cut mitred joint and jointing bolts

for assembly on site.

WORKTOP MASON MITRE PLANNER


Double postformed up to





WORKTOP MASON MITRE PLANNER 650MM DEEP




Can be used in conjunction with 600mm

deep mitres.

WORKTOP RADIUS END DIAGRAM

Maximum length for double postformed up

to 900mm deep – 4000mm. Current radius

end variations.

31



34 35

Level H is the performance standard for

Heavy Domestic Use, a vital requirement for

social housing applications. Kubix 15mm

and 18mm kitchen cabinets to BS EN 312-

P2 and P3 comply with the requirements of

BS 6222 Part 2 Level H, which

includes demanding tests to ensure fi tness

for purpose.

CABINET AND SURFACE STRENGTH

As part of BS 6222 Part 2 Level H, Kubix

15mm and 18mm cabinets undergo the

most stringent test procedures to certify

fi tness for purpose in social housing

applications and a long life of unfailing

service. For example, the cabinet and frame

are subjected to demanding forces, greater

than encountered in everyday domestic

use, to ensure their strength and integrity.

The ability of the rails to withstand sudden

lifting is tested, with Level H allowing no

component failure. Tests for the strength of

the top and bottom surfaces replicate the

effect of someone sitting on the worktop

or standing on the bottom ledge to

reach something.

SHELVES, DOORS AND HINGES

For the storage parts, the strength of the

shelf supports and the capacity of the

shelves to take a full load with minimal

defl ection are stringently assessed.

To make sure they can cope with the

constant heavy use, doors and their

hinges are tested for strength, wear and

fatigue, as well as repeated slamming,

open and shut actions. For example, doors

are opened and closed 40,000 times for

the domestic environment, and 80,000

times for heavy domestic use in the social

housing market.

DRAWERS AND HANDLES

Drawers are submitted to equally

uncompromising assessment, including

downward load while open, slam shut and

open, the strength of the drawer bottom,

and general wear and fatigue. Flaps on

doors that open downwards are tested to

represent a person leaning on the fl ap. To

test the strength of runners, a drawer is

loaded and an increasing vertical force is

applied to one corner.

Even the handles are strength tested, with

no component failure permitted.

SURFACE DURABILITY

Kubix frontals have been tested to FIRA

gold award standard for durability.

The performance of the surface fi nish is

put to the test to ensure stain resistance

to day-to-day spillages such as juices, oil

and coffee, as well as household chemicals

such as ammonia and disinfectant. Impact

resistance to scratches and dents is also

tested replicating the effect of a heavy pan

being dropped onto a surface or a sharp

knife.

FSC®

Symphony has gained full chain of custody

from the Stewardship Council (FSC®). This

indicates that timber used in our products

comes from well managed sources, and

complies with environmental, social and

economical standards.

FISP

The Furniture Industry Sustainability

Programme supports and improves the

furniture industry’s sustainability credentials

and has rapidly become established as the

industry forum on all environmental and

sustainable issues.

PERFORMANCE TESTING/GREEN CREDENTIALS

The only recognised British Standard for the strength and

performance of kitchen furniture is BS 6222 Part 2 Level H.

CARE AND ATTENTION

UNITS

Screws fi ttings should be checked regularly

to ensure that they are secure to prevent

excess strain on the furniture. Do not place

heavy weights on partially open doors or

drawers.

Avoid using strong chemicals or abrasive

cleaners. Simply use warm water with a

mild detergent and a damp cloth to clean.

Once cleaned, remove any excess moisture

with a clean, dry cloth.

FRONTALS

Frontals should be treated with care

to maintain their good looks and

performance. Never use abrasive cleaners

or strong chemicals on furniture. Melamine

and laminates are best cleaned with a

damp cloth, warm water and a mild

detergent. Do not allow water to stand

on surfaces, always wipe dry immediately

with a soft, clean cloth. Clean and protect

with furniture polish. Prevent marking or

scratching by eliminating the risk of contact

from sharp or heavy objects.

UNITS

• Always use a cutting board –

sharp knives can damage any

laminate surface.

• Apply a light coating of a non-oily

furniture polish to help hide fi ne

scratches, e.g. Pledge Clean

and Dust.

WORKTOPS - CLEANING STAINS

Always start by trying the most gentle

method. If stains persist, work through the

following steps, repeating each method if

the stain appears to be disappearing.

STEP 1.

For routine cleaning, use a damp cloth or

sponge and a mild soap or detergent.

STEP 2.

For diffi cult stains apply a mild non-abrasive

household cleaner/detergent with a soft

bristled brush.

STEP 3.

If stubborn stains persist, try a paste

of baking soda and water, or a

non-scratch cleaner such as Cif Active

Cream or Flash All Purpose, scrubbing

lightly with a soft bristled brush for

10 to 20 seconds.

STEP 4.

Apply undiluted household bleach or nail

polish remover, let stand for no longer

than 2 minutes, and rinse thoroughly with

warm water. This step may be repeated if

the stain appears to be going away and

the colour of the laminate has not been

affected.

Warning: Do not expose the surface

to household bleach for prolonged

periods, which may result in permanent

discoloration.

WORKTOPS - HEAT

• Never place hot pans, dishes or

heat producing appliances directly on

worktops.

• Always use a heat shield, hot pad or

trivet to avoid blistering or cracking of

laminate surface.

WORKTOPS - SPECIAL DO’S AND DON’TS

DO: Always rinse thoroughly after

cleaning – residue from cleaning solutions

is the single greatest cause of damage to a

laminate surface.

DO: Wipe up spills right away and rinse

thoroughly, particularly harsh chemical

liquids such as oven cleaners, drain cleaners

containing caustic soda, rust removers and

toilet bowl cleaners.

DO NOT: Use acidic or abrasive cleaners –

they can damage laminate surfaces.

DO NOT: Expose the surface to household

bleach for prolonged periods which may

result in permanent discoloration.

DO NOT: Apply excessive scrubbing,

especially on surfaces with a gloss fi nish.

Kubix kitchen furniture is designed to provide many years of reliable

service. To help keep it that way here are some simple guidelines.


34 35

Level H is the performance standard for

Heavy Domestic Use, a vital requirement for

social housing applications. Kubix 15mm

and 18mm kitchen cabinets to BS EN 312-

P2 and P3 comply with the requirements of

BS 6222 Part 2 Level H, which

includes demanding tests to ensure fi tness

for purpose.

CABINET AND SURFACE STRENGTH

As part of BS 6222 Part 2 Level H, Kubix

15mm and 18mm cabinets undergo the

most stringent test procedures to certify

fi tness for purpose in social housing

applications and a long life of unfailing

service. For example, the cabinet and frame

are subjected to demanding forces, greater

than encountered in everyday domestic

use, to ensure their strength and integrity.

The ability of the rails to withstand sudden

lifting is tested, with Level H allowing no

component failure. Tests for the strength of

the top and bottom surfaces replicate the

effect of someone sitting on the worktop

or standing on the bottom ledge to

reach something.

SHELVES, DOORS AND HINGES

For the storage parts, the strength of the

shelf supports and the capacity of the

shelves to take a full load with minimal

defl ection are stringently assessed.

To make sure they can cope with the

constant heavy use, doors and their

hinges are tested for strength, wear and

fatigue, as well as repeated slamming,

open and shut actions. For example, doors

are opened and closed 40,000 times for

the domestic environment, and 80,000

times for heavy domestic use in the social

housing market.

DRAWERS AND HANDLES

Drawers are submitted to equally

uncompromising assessment, including

downward load while open, slam shut and

open, the strength of the drawer bottom,

and general wear and fatigue. Flaps on

doors that open downwards are tested to

represent a person leaning on the fl ap. To

test the strength of runners, a drawer is

loaded and an increasing vertical force is

applied to one corner.

Even the handles are strength tested, with

no component failure permitted.

SURFACE DURABILITY

Kubix frontals have been tested to FIRA

gold award standard for durability.

The performance of the surface fi nish is

put to the test to ensure stain resistance

to day-to-day spillages such as juices, oil

and coffee, as well as household chemicals

such as ammonia and disinfectant. Impact

resistance to scratches and dents is also

tested replicating the effect of a heavy pan

being dropped onto a surface or a sharp

knife.

FSC®

Symphony has gained full chain of custody

from the Stewardship Council (FSC®). This

indicates that timber used in our products

comes from well managed sources, and

complies with environmental, social and

economical standards.

FISP

The Furniture Industry Sustainability

Programme supports and improves the

furniture industry’s sustainability credentials

and has rapidly become established as the

industry forum on all environmental and

sustainable issues.

PERFORMANCE TESTING/GREEN CREDENTIALS

The only recognised British Standard for the strength and

performance of kitchen furniture is BS 6222 Part 2 Level H.

CARE AND ATTENTION

UNITS

Screws fi ttings should be checked regularly

to ensure that they are secure to prevent

excess strain on the furniture. Do not place

heavy weights on partially open doors or

drawers.

Avoid using strong chemicals or abrasive

cleaners. Simply use warm water with a

mild detergent and a damp cloth to clean.

Once cleaned, remove any excess moisture

with a clean, dry cloth.

FRONTALS

Frontals should be treated with care

to maintain their good looks and

performance. Never use abrasive cleaners

or strong chemicals on furniture. Melamine

and laminates are best cleaned with a

damp cloth, warm water and a mild

detergent. Do not allow water to stand

on surfaces, always wipe dry immediately

with a soft, clean cloth. Clean and protect

with furniture polish. Prevent marking or

scratching by eliminating the risk of contact

from sharp or heavy objects.

UNITS

• Always use a cutting board –

sharp knives can damage any

laminate surface.

• Apply a light coating of a non-oily

furniture polish to help hide fi ne

scratches, e.g. Pledge Clean

and Dust.

WORKTOPS - CLEANING STAINS

Always start by trying the most gentle

method. If stains persist, work through the

following steps, repeating each method if

the stain appears to be disappearing.

STEP 1.

For routine cleaning, use a damp cloth or

sponge and a mild soap or detergent.

STEP 2.

For diffi cult stains apply a mild non-abrasive

household cleaner/detergent with a soft

bristled brush.

STEP 3.

If stubborn stains persist, try a paste

of baking soda and water, or a

non-scratch cleaner such as Cif Active

Cream or Flash All Purpose, scrubbing

lightly with a soft bristled brush for

10 to 20 seconds.

STEP 4.

Apply undiluted household bleach or nail

polish remover, let stand for no longer

than 2 minutes, and rinse thoroughly with

warm water. This step may be repeated if

the stain appears to be going away and

the colour of the laminate has not been

affected.

Warning: Do not expose the surface

to household bleach for prolonged

periods, which may result in permanent

discoloration.

WORKTOPS - HEAT

• Never place hot pans, dishes or

heat producing appliances directly on

worktops.

• Always use a heat shield, hot pad or

trivet to avoid blistering or cracking of

laminate surface.

WORKTOPS - SPECIAL DO’S AND DON’TS

DO: Always rinse thoroughly after

cleaning – residue from cleaning solutions

is the single greatest cause of damage to a

laminate surface.

DO: Wipe up spills right away and rinse

thoroughly, particularly harsh chemical

liquids such as oven cleaners, drain cleaners

containing caustic soda, rust removers and

toilet bowl cleaners.

DO NOT: Use acidic or abrasive cleaners –

they can damage laminate surfaces.

DO NOT: Expose the surface to household

bleach for prolonged periods which may

result in permanent discoloration.

DO NOT: Apply excessive scrubbing,

especially on surfaces with a gloss fi nish.

Kubix kitchen furniture is designed to provide many years of reliable

service. To help keep it that way here are some simple guidelines.


1

Kubix Product Specifi cation GuideKitchens for Living

Kubix

The Symphony Group Plc

Pen Hill Estate,

Park Spring Road, Barnsley

South Yorkshire, S72 7EZ

Tel: 01226 446000

Fax: 01226 711185

www.symphony-group.co.uk

In keeping with our policy of continuous product development, we reserve the right

to change colours, designs, materials, descriptions or methods of manufacture. Such

changes may be made without notice and without incurring any liability. Nothing

in this publication should be considered to be part of any contract. The illustrations

included in this publication are to indicate general format and are not necessarily

correctly scaled, proportioned or detailed.

Natural wood is used in some of our kitchens. As a natural material, wood refl ects

the endless variety of grains and textures found in nature and such variances can be

expected in any selection of timber fronted units. Timbers mellow when exposed to

sunlight, so a colour change can be expected.

PVC laminates and melamine fi nishes are also subject to slight colour change over

a period of years. Unless specifi ed otherwise, the expression ‘solid timber’ refers to

door and drawer fronts only. A copy of our conditions of sale is available on request.

Errors and omissions excepted.

Copyright and all other rights in this brochure and the photographs and other works

upon which it is based, are owned by The Symphony Group PLC. No part of the

brochure and said photographs and other works may be reproduced or transmitted

in any form or by any means (including but not limited to photocopying or storing

in any electronic medium) without the prior express written permission of The

Symphony Group PLC.

© The Symphony Group Plc 2012

Ref. KUSPECMAY12

When you have fi nished with this brochure please recycle it

Creating the perfect living space


Date post:	14-Mar-2016
Category:	Documents
Upload:	it-registrations
View:	251 times
Download:	3 times

Kubix Specification Guide

Documents