Kustom Revolution TR Airbrush — PN: 4294 (K9400)

Triggering the passion of spray-gun users, the TR airbrush proves easy to use. The long trigger provides commanding control of the airbrush spray.

• 0.30 mm

• Large, 3/4 oz. (21 ml) gravity fluid removable cup

• Spray-gun trigger design

• PTFE needle packings

Kustom Custom Micron CM Airbrush — PN: 4290 (K9000)

The mac daddy of all airbrushes, the Kustom CM is framed around the Iwata Custom Micron airbrush. The Kustom CM airbrush provides extreme control of ultra fine-line spray, silky smooth atomization and ultimate paint-flow control with hand-tuned, hand-adjusted performance.

• 0.23 mm “Matched Head System”

• Large, 1/2 oz. (14 ml) gravity fluid cup

• Taller trigger for extreme control of trigger action and paint flow

• MAC Valve for precise air pressure control

• PTFE needle packings

Kustom Eclipse CS Airbrush — PN: 4298 (K9300)

The workhorse of the Kustom line, the CS features a large general-purpose nozzle/needle combination. Still maintaining fine-line control, the CS creates wide background sprays with fine atomization and control. Designed to spray metallic, pearlescent and base-coat paints.

• 0.35 mm

• Large, 1/2 oz. (14 ml) gravity fluid cup

• Taller trigger for extreme control of trigger action and paint flow

• PTFE needle packings

Kustom Hi-Line CH Airbrush — PN: 4295 (K9100)

A preferred airbrush for users who need ultimate control of fine-line work and medium background spraying, the Kustom CH boasts a MAC Valve that supplies precise air control to the head of the airbrush for ultimate control.

• 0.30 mm

• Large, 1/2 oz. (14 ml) gravity fluid cup

• Taller trigger for extreme control of trigger action and paint flow

• MAC Valve for precise air-pressure control

• PTFE needle packings

Iwata Kustom Hi-Line HP-TH — PN: 4292 (K9200)

The Kustom TH delivers unprecedented control of a fan pattern with a minimum of overspray giving it a unique advantage over mini touch up guns. Great for small areas such as chip repair, fender wells, door jams and other hard-to-reach areas.

• 0.50 mm nozzle

• MAC Valve (Micro Air Control)

• “Fan-Patterned” air cap (fan pattern requires compressor with at least 1.2 cfm)

• “Round-Patterned” air cap

• PTFE needle packings

• Large, 1/2 oz. (14 ml) removable gravity-feed fluid cup

• Spray gun trigger design

2.Airbrushes DO NOT come with hoses unless noted otherwise.

Kustom painting takes pole position! The Iwata Kustom Series shines in atomizing solvent-based paints. With PTFE packings, large cups, pre-set handles and taller triggers these airbrushes distinguish themselves as Kustom.

Pistol Grip Filter Included!The Iwata Kustom AIrbrush Series features the Pistol-Grip Filter, your last defense against moisture.

3.Airbrushes DO NOT come with hoses unless noted otherwise.

For the elite professional who demands precise and accurate control of very detailed spraying, the Custom Micron Series is built to be the “best of the best,” hand-tested and adjusted by the world’s leading airbrush technicians.

Iwata Custom Micron CM-SB — PN: 4209 V2 (ICM3002)

• The same features of the Custom Micron B except it has a 1/8 oz. (3.5 ml) side-feed cup, which is engineered for right- and left-handed use

• Because it is side-fed, a view directly over the top of the airbrush allows for up-close, fine detail work

• For larger artwork, the Custom Micron versatility is enhanced by an optional 1/4 oz. (7 ml) side-feed cup, 1/2 oz. (14 ml) gravity-feed cup or a 1 oz. (28 ml) siphon bottle

Iwata Custom Micron CM-C Plus — PN: 4212 V2 (ICM4502)

• Using the same matched-head assembly as the other trusted Custom Micron airbrushes, the Custom Micron CM-C Plus has the same precise feel that’s entirely unique to a Custom Micron airbrush (.23 mm nozzle)

• A breakthrough technology, the Micro Air Control (MAC) Valve enables infinite control of the airflow at the head of the airbrush, which provides even more control of stippling, fine details and finely atomized background spraying

• The solvent-proof PTFE needle packing allows for the use of automotive or other solvent-based paints

• The funnel shape of the redesigned gravity-feed cup lets the airbrush be used effectively with only a couple drops of paint, ensuring a fast and thorough clean up

• A cutaway handle enables users to grab the needle-chucking nut and quickly pull back the needle to flush paint out of the cup and paint passageways for a quick and easy clean up

Iwata Custom Micron CM-B — PN: 4202 V2 (ICM2002)

• The smallest nozzle and needle combination (.18 mm) for the most precise and accurate control of detail spraying

• Features a 1/16 oz. (1.8 ml) gravity-feed cup that cleans quickly for rapid color changes

• A highly polished, hardened stainless-steel needle provides an exceptionally smooth transition from detail to mid-range spraying

Iwata Custom Micron CM-C — PN: 4208 V2 (ICM4002)

• Ideal for professional use where heavier paints are required (.23 mm nozzle) or when larger work is being created

• The Iwata Custom Micron matched-head system ensures superior atomization

• Features a larger 1/3 oz. (9 ml) gravity-feed color cup for working with large volumes of paint

VERSION 2

Ergonomic trigger prevents finger fatigue

Never lose your crown cap againwith the crown cap dock

The Custom Micron Version 2 has the same superb atomization but boasts new features. All Custom Microns now feature an ergonomic trigger, a single-piece auxiliary lever/needle-chucking guide to provide easy assembly and the crown cap dock.

Airbrushes DO NOT come with hoses unless noted otherwise.

Featuring the ultimate in air control directly at the nozzle with Iwata’s Micro Air Control (MAC) Valve Technology, the Hi-Line Series is designed for artists who need extreme control of detailed spraying. The Hi-Line Series is made with a PTFE needle packing, a dual-purpose cutaway, pre-set handle and one-piece auxiliary lever/needle chucking guide.

Iwata Hi-Line HP-AH — PN: 4231 (H1100)

• Features a 0.2 mm nozzle

• Larger threads on the nozzle offer a more secure fit and better centering of the nozzle on the body

• Sprays with one drop of paint in its 1/32 oz. (0.9 ml) fluid cavity

Hi-Line HP-CH — PN: 4003 (H4100)

• Features a 0.3 mm nozzle and a large 1/3 oz. (9 ml) tapered gravity-feed cup

• The larger nozzle and needle makes this an ideal airbrush for spraying a variety of paints from watercolors to solvent-based automotive paints

Micro Air Control (MAC) ValveA breakthrough technology, the Micro Air Control (MAC) Valve enables infinite control of the airflow at the head of the airbrush, which is different than just regulating the air pressure at the compressor.

• Lets users spray a coarse stippling effect to full atomization with a quick turn

• For fine line or detail work, it can be adjusted to create the optimum airflow for maximum control of the paint output

• By fully opening the MAC Valve, the airbrush can quickly be cleaned during color changes or for wide background spraying

Iwata Hi-Line HP-BH — PN: 4232 (H2100)

• Like the HP-AH, it has a 0.2 mm nozzle but has a larger 1/16 oz (1.8 ml) cup for holding more paint

• The gravity-feed cup features a smooth inside taper that provides for a quick and easy clean up

4.

Airbrushes DO NOT come with hoses unless noted otherwise.

Renowned as the professional’s workhorse, the popular High Performance Series features: PTFE needle packing, a dual-purpose cutaway, pre-set handle and one-piece auxiliary lever/needle-chucking guide.

Iwata High Performance Plus HP-A Plus — PN: 4233 (H1001)

• Features a 0.2 mm nozzle and needle combination for high-precision, detail spraying

• The 1/32 oz. (0.9 ml) fluid cavity is perfect for spraying small amounts of media in a small area

Iwata High Performance Plus HP-B Plus — PN: 4234 (H2001)

• Similar to the HP-A Plus except with a larger 1/16 oz. (1.8 ml) gravity-feed color cup

Iwata High Performance Plus HP-C Plus — PN: 4004 (H4001)

• A practical choice for most airbrush uses

• Its larger 1/3 oz. (9 ml) gravity-feed cup and larger (0.3 mm) needle/nozzle configuration allow for use with most media

• An airbrush that does it all – from fine hairlines to finely atomized background spray, along with an entire range of stippling effects

• The gravity-feed cup is useful for mixing custom colors and allows quick color changes

• Short paint passageway from the cup to the front of the airbrush gives it a responsive feel and allows it to be one of the quickest cleaning airbrushes in the industry

Iwata High Performance Plus HP-SB Plus — PN: 4235 (H3001)

• Similar to both the HP-A Plus and HP-B Plus, except it has a 1/8 oz. (3.5 ml) side-feed color cup

• Side-feed cup allows right- or left-handed use, and for slower detail spraying and better vision of the work surface

• Optional 1/4 oz. side cup, 1/2 oz. gravity cup or a 1 oz. siphon bottle add to the versatility of this airbrush

Iwata High Performance Plus HP-BC Plus — PN: 4236 (H5001)

• A high-detail, high-precision, bottom-feed airbrush for artists who need quick color changes with a certain set of colors

• Similar in spray characteristics and needle-nozzle size to the HP-C Plus, it has very good atomization and is extremely reliable

• Includes a 3/4 oz. glass bottle

5.

Airbrushes DO NOT come with hoses unless noted otherwise.

Iwata Eclipse HP-BCS PN: 4200 (ECL2000) — Airbrush and bottle only PN: 4201 (ECL2001) — Airbrush, bottle, hose, cleaner and paint

• Bottom-feed airbrush features a 0.5 mm needle and nozzle combination

• Sets the industry standard for high-performing, general-purpose, high-paint-flow airbrushes

• Versatile, reliable performance — this airbrush does it all

Iwata Eclipse HP-SBS PN: 4205 (ECL3500) — Airbrush and 1/8 oz. side-mount cup PN: 4206 (ECL3550) — Autographics - Airbrush, 1/2 oz. side-mount cup and 1 oz. siphon-feed bottle

• Side-feed airbrush features a 0.35 mm needle and nozzle combination with the option of four cup sizes – the standard 1/8 oz. side cup, a 1/4 oz. side cup, a special 1/2 oz. gravity-feed side cup or a 1 oz. siphon-feed bottle

• Ideal for custom automotive graphics and murals, as well as for fine-arts work that requires custom color mixing and thicker paints

• The Autographics version of the HP-SBS is similar to the standard HP-SBS except it comes with a large 1/2 oz side mount, gravity-feed cup and a 1 oz. siphon-feed bottle

Iwata Eclipse HP-CS — PN: 4207 (ECL4500)

• Gravity-feed airbrush features a unique 0.35 mm needle and nozzle combination for fine-detail spraying, but with high-paint-flow capacity

• Generous 1/3 oz. sized cup is designed with a new funnel shape, which makes for easy clean up and more efficient paint flow

• Automotive artists, fine artists and students will appreciate how well the Eclipse CS sprays heavier acrylics and Medea Textile Colors, while maintaining high-detail spray characteristics

The multi-purpose, high-paint-flow, versatile airbrushes of the Eclipse Series cover a wide range of uses. Because they can spray heavier paints and achieve a fine line as well as a 2" wide pattern, they are well suited for just about any application or project. these are the most popular Iwata airbrush models due to their versatility, not to mention that they get such a varied spray pattern from just one size nozzle and needle!

6.

• Unique “pistol-grip” feel, looks like a miniature spray gun, but sprays and performs like a large airbrush

• Equipped with a long tapered needle that ensures a smooth transition between fine- to-wide background spray

• Utilizes a dual-purpose air cap and a fan adjustment valve that lets the airbrush spray a round or fan pattern. The round pattern is useful for painting graphics, while the oval or fan shape creates a smooth background spray

• Uses a special fitting so airbrush bottles can be used instead of a gravity-feed cup (optional gravity-feed cups available), allowing for multiple color bottles to be interchanged quickly without having to clean a cup thoroughly

• Unique “pistol-grip” feel, looks like a miniature spray gun, but sprays and performs like a large airbrush

• Works with most twin-piston airbrush compressors

• True center-post gravity-feed airbrushes

• MAC Valve for precise control of air and spray

• True fan pattern spray like most spray guns

• Twilight-chrome finish

• G3: 0.3 mm stainless steel nozzle and 4oz. stainless-steel cup and lid

• G5: 0.5 mm stainless steel nozzle for heavier paints and 8oz. stainless-steel cup and lid

Iwata Eclipse G3 — PN: 4331 (ECL9100)Iwata Eclipse G5 — PN: 4332 (ECL9200)

Iwata Eclipse G6 — PN: 4214 (ECL9000)

Iwata Eclipse G Series

Airbrushes DO NOT come with hoses unless noted otherwise.

Iwata Revolution HP-TR1 0.3 mm Nozzle — PN: 4237 (R5000)Iwata Revolution HP-TR2 0.5 mm Nozzle — PN: 4238 (R5500)

• Unique pistol trigger that is comfortable and smooth

• Featuring the Pistol-Grip Filter, your last defense against moisture and 1/3 oz (TR1) or 1/2 oz. (TR2) side-mount color cup

• Dual-action for full control over paint and spray

• Great for custom automotive painting since the design offers a similar feel and comfort typical of spray gun usage

• Can also be used with Iwata 1 oz. and 2 oz. side-mount bottle sets, which are available separately

Iwata Revolution BCR PN: 4240 (R2000) — Airbrush and bottle only PN: 4241 (R2001) — Airbrush, bottle and hose

• A bottle-feed, dual-action airbrush for general-use spraying

• Siphon-feed model makes it easy to swap out bottles of specific colors quickly

• Useful for T-shirt painting, model-railroad landscapes, R/C car painting, airplane models and other general art, hobby and craft projects

Iwata Revolution SAR (Single-Action) — PN: 4239 (R1000)

• A breakthrough in single-action airbrush design

• Built with the same quality and performance as the dual-action airbrush

• Perfect for those seeking high performance in a single-action design

Start off airbrushing with the industry leader — Iwata. Made for users at all levels, the Revolution Series features top-of-the-line airbrushes at a great value. With breakthrough technology and performance, these airbrushes outperform all others in their price range.

Iwata Revolution Airbrushes Feature: • Internal mix airbrush• Ergonomic handle design• Fine detail to 1-1/2” spray pattern• Larger nozzle and needle combination (0.5 mm) makes

for easier spraying of thicker or heavier paints• Redesigned trigger mechanism and larger needle-

chucking nut for easy assembly• Replaceable internal PTFE needle packing for use with

solvent-based paints• Value priced

Iwata Revolution CR — PN: 4247 (R4500)

• A gravity-feed airbrush designed for quick changes of custom mixed colors

• Versatile for moderate detail to background spraying

• Perfect for general-purpose art-and-craft projects, as well as model-railroad detailing, R/C car bodies, plastic kits and automotive painting

7.

BCR shown with optional glass bottle.

Airbrushes DO NOT come with hoses unless noted otherwise.8.

Automotive Airbrush Set CSwithout Compressor PN: 4221

with Compressor PN: 4220

Start airbrushing today with this self-starting kit. It has everything one needs to get started airbrushing on vehicles, helmets, tanks, virtually anything!

Airbrush Conceptsby Craig Fraser DVD

Medea Solvent ProofBottle Packwith Airbrush Cleaner

Automotive Airbrush Set BCSwithout Compressor PN: 4211

with Compressor PN: 4210

Start airbrushing today with this self-starting kit. It has everything one needs to get started airbrushing on vehicles, helmets, tanks, virtually anything!

Smart Jet Compressor with Iwata Eclipse HP-BCS and Airhose

Smart Jet Compressor with Iwata Eclipse HP-CS and Airhose

Artool Angle Master Freehand Airbrush Template

Artool Angle Master Freehand Airbrush Template

Perfect for the Beginner to Professional Custom Auto-Graphics Artist

AUTO-GFX CAFOR IWATA AIRBRUSH

IS-850 IWATA STUDIO SERIES SMART JET AIR COMPRESSOR WITH AIRHOSE

ARTOOL® FREEHAND® AIRBRUSH TEMPLATE FH-1BY EDDIE YOUNG 6" x 8"

PN: NS9550

Perfect for the beginner to professional custom auto-graphics artist, the Auto-GFX CA for Iwata airbrush features smooth atomization for fine details and is specifically designed for solvent and waterborne automotive paints and pigments. Preferred when working in a small to medium sized areas with small amounts of paint, gravity-feed airbrushes perform well at lower air pressures, which help create greater detail.

Auto-GFX CA for Iwata — PN: N9500

• Unique 0.40 mm needle and nozzle combination for fine detail spraying and medium sized spray patterns

• Large, easy to clean gravity-feed bowl with lid

Available for the beginning or casual airbrush user, Iwata Studio Series Compressors utilize the latest technology to fulfill your every airbrushing need. Powerful, compact and remarkably quiet, these reliable compressors, with oil-less piston motors, are low maintenance and affordably priced, meaning artists can now spray a variety of different mediums without compromise. Sold complete with fittings, filters, airhoses and an adapter to fit any airbrush.

Power Jet Lite Item #IS925 Built with Iwata’s Smart Technology, the Power Jet Lite automatically shuts itself off when not in use and with no tank reservoir, delivers all the power necessary for use with the high paint-flow Iwata Eclipse and Eclipse G6 Pistol Grip airbrush. • Zero-maintenance, oil-less DUAL piston air compressor• Case-mounted air regulator / moisture-filter• Air regulator for precise air-pressure adjustment• Strong protective outer case• High-strength polyurethane hose fits Iwata airbrushes• On/off switch• Built-in airbrush holder• Size: 10.5 x 12 x 6 in. (26.5 x 31 x 15.5 cm)• Smart Jet Technology and 2X Sprint Jet Power

Technical SpecificationsHp: 1/6 HpCFM: 1.2 CFM@open flowVoltage: 110V/60hzPSI: 1-60 PSI max. pressureShipping Weight: 17.5 Pounds

Smart Jet Item #IS850 The Smart Jet compressor is perfect for the occasional and professional artist doing general airbrush applications. • Zero-maintenance, oil-less piston air compressor• Extra hose for enhanced moisture separation• Moisture filter also prevents pulsation• Mounted air pressure gauge• Bleed valve airflow adjustment to lower air pressure• High-strength polyurethane hose fits Iwata airbrushes• On/off switch• Built-in airbrush holder• Size: 10 x 7 x 6 in. (25 x 18 x 16 cm)• Smart Jet Technology

Technical SpecificationsHp: 1/8 HpCFM: 0.64 CFM@open flowVoltage: 110V/60hzPSI: 1-35 PSI max. pressureShipping Weight: 8 Pounds

Power Jet Item #IS900 Engineered with a large capacity air storage tank, it’s an excellent compressor for the occasional or professional airbrush user doing general or extended airbrush applications at low or higher air pressures.• Zero-maintenance, oil-less DUAL piston air compressor• 3.5 liter air storage tank, for spraying at higher pressures and maximum moisture separation• Zero pulsation at all air pressures• Case-mounted air regulator / moisture-filter• Air regulator for precise air-pressure adjustment• Strong protective outer case• High-strength braided nylon covered hose fits all Iwata airbrushes• On/off switch• Size: 16 x 13 x 7 in. (41 x 33 x 18 cm)• Smart Jet Technology and 2X Sprint Jet Power

Technical SpecificationsHp: 1/6 HpTank Size: 3.5-liter (0.9 Gallons)CFM: 1.2 CFM@open flowVoltage: 110V/60hzPSI: 1-60 PSI max. pressureShipping Weight: 28 Pounds

Smart Jet Pro Item #IS875 The Smart Jet Pro compressor is perfect for the occasional and professional artist doing general airbrush applications.• Zero-maintenance, oil-less piston air compressor• Case-mounted air regulator / moisture-filter• Air regulator for precise air-pressure adjustment• Strong protective outer case• High-strength polyurethane hose fits Iwata airbrushes• On/off switch• Built-in airbrush holder• Size: 10 x 7 x 6 in. (25 x 18 x 16 cm)• Smart Jet Technology

Technical SpecificationsHp: 1/8 HpCFM: 0.64 CFM@open flowVoltage: 110V/60hzPSI: 1-35 PSI max. pressureShipping Weight: 14 Pounds

Power Jet Pro Item #IS975 Featuring the same powerful twin-pump as the Power Jet, the Power Jet Pro compressor is equipped with dual air pressure regulators for precise adjustment of airflow to two individual workstations and a 2 liter tank reservoir to power the Iwata Eclipse and Eclipse G6 Pistol Grip airbrush.• 2 liter air storage tank, for spraying at higher air pressures and maximum moisture separation• Zero pulsation at all air pressures• DUAL Adjustable pressure regulators• DUAL Case-mounted air regulator / moisture-filter• DUAL Quick disconnect ports• DUAL Built-in airbrush holders• Strong protective outer case• Size: 13 x 9 x 7 in. (33 x 23 x 18 cm)• Smart Jet Technology and 2X Sprint Jet Power

Technical SpecificationsHp: 1/6 HpCFM: 1.2 CFM@open flowVoltage: 110V/60hzPSI: 1-60 PSI max. pressureShipping Weight: 26.5 Pounds

Smart Jet Plus Tubular Compressor Item #IS875HT The tubular air tank is the carry handle! Works great with the Eclipse BCS (40 psi), Kustom TH (40 psi fan/round cap), RG-3 (40 psi round cap), Eclipse G3, G5 and G6 (42-44 psi) · Compressor shuts itself off automatically when not in use· Zero-maintenance, oil-less piston air compressor· Built-in airbrush holder· Air Regulator and Gauge for precise air pressure adjustment· Air tank (0.45 liter) inside the handle· High-strength braided nylon covered hose fits all Iwata airbrushes· On/off switch

Technical SpecificationsHp: 1/6 HpCFM: .81 CFM@open flowTank Size: 0.45 literVoltage: 110V/60hzPSI: 1-60 PSI max. pressureShipping Weight: 13 Pounds

Power Jet Plus Tubular Compressor Item #IS925HTThe tubular air tank is the carry handle! Works great with Eclipse BCS (50 psi), Kustom TH (50 psi fan/round cap), and Eclipse G Series (42-44 psi). · Compressor shuts itself off automatically when not in use· Zero-maintenance, oil-less piston air compressor· Built-in spray gun holder· Air Regulator and Gauge for precise air pressure adjustment· Air tank (0.5 liter) inside the handle· High-strength braided nylon covered hose fits all Iwata airbrushes· Two built-in cooling fans· Smart Technology and 2x Sprint Jet Power· On/off switch

Technical SpecificationsHp: 1/4 HpCFM: 1.4 CFM@open flowTank Size: 0.5 literVoltage: 110V/60hzPSI: 1-60 PSI max. pressureShipping Weight: 17 Pounds

9.

Smaller Size!

CRAIG FRASERby

SOLD AS SETFH-NS-1

CRAIG FRASERby

SOLD AS SETFH-NS-2

When tabs are cut on the Nano Series™ Templates, each Nano measures 2" x 3.5"

SOLD AS SETFH-NS-4

SOLD AS SETFH-NS-5

SOLD AS SETFH-NS-6

SOLD AS SETFH-NS-3

DIABLO

INFERNO

WILD FIRE

18.

Craig Fraser’s Automotive Cheap

Tricks & Special F/X Book PN: BOOK 1

Craig Fraser’s Automotive Cheap

Tricks & Special F/X 2 Book PN: BCF 100

Pinstriping Masters Book

PN: BPI

Pinstriping Masters 2

Book PN: BPI #2

Custom Grip HandleErgonomic, textured, non-slip grip for better airbrush control

Fits Iwata• Kustom TH • Kustom TR• Revolution TR1 • Revolution TR2

PN: K200

One (1) Set with One (1) Silver Handle

PN: K150One (1) Set with Five (5) Colored Handles

PN: K155

The Triple-Action Handle Fits These Iwata Airbrushes:• Hi-Line Series• HP-C and HP-BC• HP-C Plus and HP-BC Plus• Eclipse CS, BCS and BS• Revolution BCR and CR• Kustom CH and CS

Invented and Patented by Gentry Riley

*Works with Iwata airbrushes only. Airbrush not included.

19.

• With its unique raised edge, your parts will never roll away again!

• Take apart and reassemble your airbrush on a large, safe and soft surface

• Non-skid backing

• 11.75 x 10.75 in

PN: CL 200

• Unique tools and detailed instructions to clean and maintain any style of airbrush

• Includes: Illustrated Instructions, Extra Small Cleaning Brushes, 50 Pipe Cleaners, Artool Studio Wipes (12 Count Pouch), 1 oz Bottle of Medea Airbrush Cleaner, Medea SuperLube, Iwata Nozzle Wrench, Iwata Washing Brush and Iwata LED Magnifier

• Sturdy Iwata case with latch and hang loop

PN: CL 100

• Fine tune your airbrush for ultimate performance

• Designed for Iwata and NEO airbrushes

• Zippered case with removable zippered accessory pouch

• Includes: Iwata Air Valve Guide Wrench, Iwata Soft Jaw Pliers, Iwata Needle Packing Screw Drivers, Iwata Nozzle Wrench and needle storage tube

PN: CL 500

CLEAN YOUR AIRBRUSH LIKE A PRO...

Universal AirbrushHolder

• Securely holds two of any make/model airbrush

• Heavy-duty clamp for tables up to 3 inches (76.2 mm) thick

• Includes Workstation bracket for Iwata Universal Spray Out Pot

PN: AH400

Pistol-Grip Moisture Filter

• Last line of defense against moisture attaching directly onto the airbrush

• Miniature in size, the super-fine, 5-micron filter element performs like a full-size filter separator

• Clear filter bowl allows visual inspection of built-up moisture and is evacuated through a spring-loaded release valve – without taking the filter off the airbrush

• Acts as a handle on the airbrush to add comfort and relieve muscle tension

PN: 4274

Automotive Mask features a medium to low tack adhesive that is designed for airbrushing with automotive basecoat/clearcoat. It is also semi-transparent and can be written on with pencil or pen. Automotive Mask can be cut and if used properly will leave no adhesive residue. PN: APL4050 12" x 100 yds

StretchMask is a multi-medium, stretchable and flexible repositionable masking film. It is especially suited to conform to curved and irregular surfaces such as motorcycle tanks, helmets, etc. It is clear, thin film that cuts very easily with any brand of art knife or single-edged razor and can be effortlessly manipulated and repositioned with your artwork always in view.PN: F101 18” x 10 ydsPN: F102 18” x 25 yds

Artool FrisketFilm is a low tack, soft-peel, self-adhesive masking film. It has a translucent backing for easy handling, cuts cleanly and can be removed easily from nearly every working surface such as photographs, illustration board, Claybord, paper, canvas, glass, plastic, metal and glazed ceramic surfaces.MATTEPN: F301 10" x 4 yds roll (6 per carton)PN: F302 14" x 4 yds roll (6 per carton)

GLOSSPN: F401 10" x 4 yds roll (6 per carton)PN: F402 14" x 4 yds roll (6 per carton)

Medea Airbrush Cleaner• High-strength, general-purpose cleaner, great

for cleaning any airbrush or artist tools• Environmentally safe and ready to use• Apply in the needle cap and along the needle

to enhance paint flow and prevent tip drying 4242 4 oz. Cleaner4217 8 oz. Cleaner4216 16 oz. Cleaner4226 32 oz. Cleaner

Medea Super Lube

• Natural and non-toxic, can be used on all moving parts of an airbrush

• Use on main lever, needle packing and valve-piston packing to keep them moving smoothly

• Apply in the needle cap and along the needle to enhance paint flow and prevent tip drying

PN: 4218 — 1/2 oz. (14 ml)

Ultra Mask is a solvent-proof, tinted film for easy reference and workability. It's low tack with secure adhesive strength is safe for artwork. Ultra Mask provides maximum stretch for those irregularly shaped surfaces.PN: F501 24” X 5 yds rollPN: F502 24” X 10 yds rollPN: F503 9” X 6.5 ft rollPN: F504 9” X 11” sheets (5 ea.)

20.

Easily mount your AIR-PORT with its sturdy mounting magnets anywhere you work or bolt it to a desired location for permanent mounting. Holds 3 airbrushes and all your airbrushing supplies (not included).Dimensions - 9˝ w X 5˝ d X 2.5˝ hWeight - 4 lbsPN: KJ 200

The AIR-PORT HANGER features adjustable sliding arms to accommodate various airbrush styles and attaches securely to most metal surfaces by its powerful mounting magnet, or it can be bolted permanently to any work area.PN: KJ 100

AUTOMOTIVE MASK

Hobby Mask is a clear adhesive airbrushing film, which is solvent-proof and can adhere to irregular and odd contours. It is especially suited for model-making applications, such as scale autos, RC car bodies, camouflage, armor patterns, weathering accents, racing stripes, modern geometric designs and nearly any airbrush or paint masking application.HM-1 6” x 10 yds.HM 2 MS 4” x 5 yds.

PN: 41782 oz. (56 ml)

High StrengthCylinder

Crystal Clear Jars and Cylinder Bottles• For water-based paint only, these bottles reveal

the actual color in the bottle

Available with No-Rust or Fast-Blast Caps.

Squeeze Bottles with Twist-Off Lid• Mix paint and squeeze paint into your

airbrush cup

Bottle Set PN: 4222

• One 1 oz. and 4 oz. Bottles, 1 oz. Medea Airbrush Cleaner and two 2 oz. Bottles

High Strength Translucent Jars and Cylinder Bottles• Most complete bottle assortment

available anywhere • Sets are designed for all types of mediums

— both solvent and water-based paints• Cylinder bottles are ideal for designing compact

multiple-gun systems since they will fit closer together than the jar-shaped bottles

Available with No-Rust or Fast-Blast Caps.

Iwata Moisture Filter with Regulator and GaugePN: FA600DH and FA700DH

• Essential for optimizing the performance of both the compressor and the airbrush

• Attach either directly to the air source or can be placed inline between two airhoses

• A high-quality 5-micron filter is used to remove any potential moisture particles

• Includes Workstation Bracket for Universal Airbrush Holder

Side-Feed Bottles, Siphon- and Gravity-Feed Cups• Add versatility to any side-feed Iwata airbrush

with these bottles and cups

Quick Disconnect Sets PN: 4275

• Completely shuts off airflow when disconnected • Screws onto all Iwata airhoses and airbrushes• With its quick-release action, changing airbrushes

is fast and easy with one air source and hose• Rated for air pressures up to 120 psi

Quick Disconnect Adaptors (Male Only) PN: 4275-2

• Screw onto each Iwata airbrush and are used in conjunction with the quick disconnect set on the airhose

• Allows for the convenient use of multiple Iwata airbrushes with one airhose

PN: 41621 oz. (28 ml)

Cylinder

PN: 41632 oz. (56 ml)

Cylinder

PN: 41731 oz. (28 ml)

PN: 4163-S2 oz. (56 ml)

PN: 41334 oz. (112 ml)

Cylinder

PN: 42032 oz. (56 ml)

Cylinder

PN: 41244 oz. (112 ml)

Cylinder

PN: 41233 oz. (84 ml)

Cylinder

PN: 41751 oz. (28 ml)

High StrengthCylinder

PN: 4176 2 oz. (56 ml)

High StrengthCylinder

PN: 41522 oz. (56 ml)

PN: 41771 oz. (28 ml)

PN: 42281/2 oz. (14 ml)

Gravity Cup HP-SB, SBS

PN: 41561/4 oz. (7 ml)

Side Cup HP-SB, SBS

PN: 42231/8 oz. (4 ml)

Side Cup HP-SB, SBS

PN: 41794 oz. (112 ml)High Strength

Cylinder

PN: 41594 oz. (112 ml)

21.

Cobra Coil Airhose PN: 4132 — 10' (3.05m)

• Unique in its design because it recoils out of the way when not in use

• Made of strong polyurethane for use with all Iwata airbrushes and most other airbrush brands

Universal Spray Out Pot PN: CL 300

• Eliminate overspray when cleaning your airbrush• Universal airbrush hanger fits all gravity-feed,

side-feed, bottom-feed and trigger-style airbrushes• Filter cap/parts holder (extra filters included)• Easy-to-clean, dishwasher safe 10 oz (300 cc) glass pot with removable, non-skid pot sleeve

Straight Shot Airhose

PN: 4012 — 10' (3.05m)

• Made of polyurethane, which is 1/3 the weight and twice the strength of the braided airhose

• For use with all Iwata airbrushes and most other airbrush brands

Nylon-Covered Braided AirhosesPN: 4010 — 10' (3.05m)

• Available for all Iwata airbrushes

PN: BT 050 — 10' (3.05m)

• 1/4” fittings on both ends• Available for the LPH80 and other touch-up

spray guns

Pre-Set Adjustable HandlesPN: 4287 — HP-A, B and SB

PN: 4105 — HP-C, BC, BC2, CS and SBS

PN: 4065 — HP-BE1 and BE2

PN: 4121 — Single Cut Handle HP-C, BC, BC2, CS, BCS and SBS

• Great for adjusting to the perfect working spray width

• Limit the amount of needle travel, allowing for greater control of the airbrush

• Ideal for students getting started or for professionals where the finest control of spray is needed

• Adjustment screw is finely threaded, allowing for precise fine tuned control

• Handles available for all Iwata airbrushes, except the Revolution SAR

FA700DH

AIRBRUSHESCustom Micron Series (Version 2) 4202 V2 (ICM2002) CM-B Airbrush4209 V2 (ICM3002) CM-SB Airbrush 4208 V2 (ICM4002) CM-C Airbrush4212 V2 (ICM4502) CM-C Plus Airbrush

Eclipse Series 4200 (ECL2000) HP-BCS Bottle-Feed Airbrush and Bottle Only4201 (ECL2001) HP-BCS Bottle-Feed Set Airbrush, Bottle, Hose, Cleaner and Paint4205 (ECL3500) HP-SBS Side-Feed4206 (ECL3550) HP-SBS Autographics4207 (ECL4500) HP-CS Large Gravity-Feed4331 (ECL9100) G3 Pistol Grip Airbrush4332 (ECL9200) G5 Pistol Grip Airbrush4214 (ECL9000) G6 Pistol Grip Airbrush

Hi-Line Series 4231 (H1100) Hi-Line AH Airbrush4232 (H2100) Hi-Line BH Airbrush4003 (H4100) Hi-Line CH Airbrush

HP (High Performance) Plus Series 4233 (H1001) HP-A Plus Airbrush4234 (H2001) HP-B Plus Airbrush4004 (H4001) HP-C Plus Airbrush4235 (H3001) HP-SB Plus Airbrush4236 (H5001) HP-BC Plus Airbrush

Kustom Series4290 (K9000) Kustom CM Airbrush4292 (K9200) Kustom HP-TH Airbrush4294 (K9400) Kustom TR Airbrush4295 (K9100) Kustom CH Airbrush4298 (K9300) Kustom CS Airbrush

Revolution Series 4240 (R2000) HP-BCR Bottle-Feed4241 (R2001) HP-BCR Bottle-Feed Set Airbrush Bottle and Hose 4247 (R4500) HP-CR Large Gravity-Feed4239 (R1000) HP-SAR Single Action Bottle-Feed4237 (R5000) HP-TR1 0.3-mm Nozzle4238 (R5500) HP-TR2 0.5-mm Nozzle

Auto-GFX CA for Iwata N9500 Auto-GFX CA for Iwata Gravity-Feed

COMPRESSORSIwata Studio Series Compressors IS850 Smart Jet (Smart Technology)IS875 Smart Jet Pro (Smart Technology)IS900 Power Jet (2x Sprint Power and Smart Technology)IS925 Power Jet Lite (2x Sprint Power and Smart Technology)IS975 Power Jet Pro (2x Sprint Power and Smart Technology)IS875HT Smart Jet Plus Tubular (2x Sprint Power and Smart Technology)IS925HT Power Jet Plus Tubular (2x Sprint Power and Smart Technology)

ACCESSORIESCL 100 Iwata Airbrush Cleaning KitCL 500 Iwata Professional Airbrush Maintenance ToolsCL 200 Iwata Raised Ridge Airbrush Cleaning MatCL 300 Iwata Universal Spray Out Pot AH400 Iwata Universal Airbrush Holder

Bottle Set4222 PKG 1 of Each Bottle 1 oz., 4 oz., 1 oz. of Cleaner and 2 Each 2 oz. Bottles

Cleaners and Lubricants 4218 1/2 oz. (14 ml) Super Lube4242 4 oz. Cleaner4217 8 oz. Cleaner4216 16 oz. Cleaner4226 32 oz. Cleaner

Crystal Clear Jars and Cylinder Bottles (Water-Based Paint Only)4175 1 oz. (28 ml) High Strength Cylinder4178 2 oz. (56 ml) High Strength Cylinder4176 2 oz. (56 ml) High Strength Cylinder4179 4 oz. (112 ml) High Strength Cylinder

MASKING FILMSArtool FrisketFilm F301 Matte - 10" x 4 yds roll, 6 per cartonF302 Matte - 14" x 4 yds roll, 6 per cartonF401 Gloss - 10" x 4 yds roll, 6 per cartonF402 Gloss - 14" x 4 yds roll, 6 per carton

Artool Hobby MaskHM1 6" x 10 yds.HM 2 MS Mini Series 4" x 5 yds.

Artool StretchMask F101 18" X 10 yds.F102 18" x 25 yds.

Artool Ultra Mask F501 24" x 5 yds. RollF502 24" x 10 yds. RollF503 9" x 6.5 ft Roll F504 9" x 11" Sheets ( 5 ea. Per Carton)

Automotive Mask APL4050 12" x 100 yds.

ARTOOL FREEHAND AIRBRUSH TEMPLATESAngle Master by Gary PadillaFH-9-SP Angle Master

Aztec FX by Gerald MendezFH-AZTFX-1 Aztec FX

The Big Shield Special Edition Set by Gabe McCubbinFH 7 BLM The Big Shield Special Edition Set

Biomech FX by Mike LavalleeFH-BMFX-1 Skull Buster with Tech SupportFH-BMFX-2 Spinal Trap with Tech Support

Blasted FX by Ryan "Ryno" TempletonFH-BLTFX-1 Circle FXFH-BLTFX-2 Oval FXFH-BLTFX-3 Gamblin' FXFH-BLTFX-4 Lucky FXFH-BLTFX-5 Sacred FXFH-BLTFX-6 Marine FXFH-BLTFX-7 All SixFH-BLTFX-7-MS Mini Series (4 Templates)

Boneheadz by Mike LavalleFH-BH1 CraniumFH-BH2 ScreamersFH-BH3 Eight Dead

Bubble FX by Dennis MathewsonFH-BFX-1 Bubble FX

Carbon Fiber FX by Chris CruzFH-CFX-1 Carbon Fiber FX

Curse of SkullMaster by Craig Fraser FH-SK10 Petting ZooFH-SK11 Evil HordeFH-SK12 BuckaneerFH-SK13 VoodooFH-SK14 Bonz IIFH-SK15 All FiveFH-SK15-MS Mini Series

Draco Nano Series by Craig FraserFH-NS-2 Draco Nano Series Set

Essential Seven Signature SeriesFH-1-SP Eddie Young TemplateFH-2-SP Eddie Young TemplateFH-3-SP 360˚ Shield by Richard MontoyaFH-4-SP 45˚ Shield by Richard MontoyaFH-5-SP Mini Shield by Andrea MistrettaFH-6-SP Super Shield by Andrea MistrettaFH-7-SP The Big Shield by Gabe McCubbinFH-P-SP The Essential Seven Set

Evil 3 by Craig FraserFH-SK-LTD Evil 3 Set

Flame Master by Mr. J. FH-FM1 Flame Master MediumFH-FM2 Flame Master MultipleFH-FM Flame Master Complete Set

Part Numbers (PN:)ACCESSORIES (CONT'D) Custom Grip HandleK200 Custom Grip Handle

Filters and Air Regulators FA600DH Iwata Moisture Filter with Regulator, Gauge and Workstation bracket FA700DH Iwata Moisture Filter with Regulator, Gauge and Workstation bracket 4274 Pistol-Grip Moisture Filter

High Strength Translucent Jars and Cylinder Bottles (Water and Solvent-Based Paints) 4203 2 oz. (56 ml) Cylinder4162 1 oz. (28 ml) Cylinder4163 2 oz. (56 ml) Cylinder4133 4 oz. (112 ml) Cylinder4123 3 oz. (84 ml) Cylinder4124 4 oz. (112 ml) Cylinder

Karajen ProductsKJ 200 Air-Port Airbrush Work StationKJ 100 Air-Port Hanger

Pre-Set Adjustable Handles4287 Pre-Set Handle HP-A, B, SB4105 Pre-Set Handle HP-C, BC, BC2, CS, SBS4065 Pre-Set Handle HP-BE1, BE24121 Single Cut Handle HP-C, BC, BC2, CS, BCS, SBS

Quick Disconnect Sets 4275 Quick-Fit Quick Disconnect Adapter Set4275-2 Quick-Fit Quick Disconnect Adapter MALE ONLY

Side-Feed Bottles, Siphon and Gravity-Feed Cups 4173 1 oz. Side-Feed Bottle with Lid4163-S 2 oz. Side-Feed Bottle with Lid 4223 1/8 oz. (4 ml) Side Cup HP-SB, SBS4156 1/4 oz. (7 ml) Side Cup HP-SB, SBS4228 1/2 oz. (14 ml) Gravity Cup HP-SB, SBS

Squeeze Bottles4177 1 oz. Squeeze Bottle with Lid4152 2 oz. Squeeze Bottle with Lid4159 4 oz. Squeeze Bottle with Lid

Triple-Action Handle K150 One (1) Set with One (1) Silver HandleK155 One (1) Set with Five (5) Color Handles

AIRHOSESCobra Coil Airhoses 4132 10' (3.05m) for Iwata

Nylon Covered Braided Airhoses 4010 10' (3.05m) for IwataBT 050 10’ (3.05m) 1/4" Fittings, Both Ends

Straight Shot Airhoses 4012 10' (3.05m) for Iwata

AIRBRUSH KITS 4210 BCS Airbrush Kit with Compressor4211 Airbrush Kit with Eclipse BCS (No Compressor)4220 CS Airbrush Kit with Compressor4221 Airbrush Kit with Eclipse CS (No Compressor)NS9550 Auto-GFX CA for Iwata Kit with Compressor and Auto-GFX CA Airbrush

INSTRUCTIONAL BOOKS BPI Pinstriping Masters BPI #2 Pinstriping Masters 2BOOK 1 Craig Fraser's Automotive Cheap Tricks & Special F/XBCF 100 Craig Fraser's Automotive Cheap Tricks & Special F/X 2

22.

ARTOOL FREEHAND AIRBRUSH TEMPLATES (CONT'D)Kustom Kulture by Craig Fraser FH-KKFX-15 FlyballzFH-KKFX-16 Piston's & PlugsFH-KKFX-17 Lucky 7FH-KKFX-18 Aces N' EightsFH-KKFX-19 Sacred HeartFH-KKFX-20 Martini TimeFH-KKFX-21 All SixFH-KKFX-21-MS Mini Series

Metropolis by Yvonne MecialisFH-MET-1 Metropolis

Master Series by Radu VeroFH-RV-SP Master Series

Match Makers by Michael CacyFH-11 Match Makers

Pack'O'Skullz by Scott MacKayFH-PKOS 1 Pack'O'SkullzFH-PKOS 2 Pack'O'Skullz

Patriotica by Craig FraserPTR-1SP RedPTR-2SP WhitePTR-3SP And BluePTR-4SP Eagle OnePTR-5SP All FourPTR-5SP-MS Mini Series

Pin-Up Shield by Edward ReedFH-10 Pin-Up Shield

Piracy by Craig Fraser FH-PRY-1 Tell No TalesFH-PRY-2 Jolly RodgerFH-PRY-3 O' CursedFH-PRY-4 TortugaFH-PRY-5 Flying DutchmanFH-PRY-6 Pieces of EightFH-PRY-7 All SixFH-PRY-7 MS Mini Series

The Return of SkullMaster by Craig Fraser FH-SK16 Frontal IIFH-SK17 Multiple IIFH-SK18 Screamin’ IIFH-SK19 Lucky 13FH-SK20 All FourFH-SK20-MS Mini Series

SkullMaster by Craig Fraser FH-SK1 SP The MultipleFH-SK2 SP The FrontalFH-SK3 SP The ScreamingFH-SK4 SP All ThreeFH-SK4 SP-MS Mini Series

Skullophenia Nano Series by Craig FraserFH-NS-1 Skullophenia Nano Series Set

Son of SkullMaster by Craig Fraser FH-SK5 Nite & DayFH-SK6 Devil or AngelFH-SK7 BonzFH-SK8 MenagerieFH-SK9 All FourFH-SK9MS Mini Series

Spider Master by Craig FraserFH-SM-1 SpiderzFH-SM-2 ArachnophobiaFH-SM-3 Widow-MakerFH-SM-4 All ThreeFH-SM4-MS Mini Series

Splatter FX by Gerald MendezFH-SFX-1 Splatter FX

Steamdriven by Craig FraserFH-SDSK-1 Steam SkullFH-SDSK-2 Tick TockFH-SDSK-3 SprungFH-SDSK-4 All ThreeFH-SDSK-4MS Mini Series

ARTOOL FREEHAND AIRBRUSH TEMPLATES (CONT'D)Steampunk FX by Craig FraserFH-SPFX-1 JunkFH-SPFX-2 MechanixFH-SPFX-3 GaugesFH-SPFX-4 SwitchesFH-SPFX-5 KlockworxFH-SPFX-6 Gear DrivesFH-SPFX-7 All SixFH-SPFX-7-MS Mini Series

Steampunk FX2 by Craig FraserFH-SPFX2-1 Klockwerks IIFH-SPFX2-2 Jerry-RigFH-SPFX2-3 The LabFH-SPFX2-4 GrillsFH-SPFX2-5 All FourFH-SPFX2-5MS Mini Series

Texture FX by Gerald MendezFH-TFX1 Texture FX SetFH-TFX1-MS Mini Series

Texture FX2 by Gerald MendezFH-TFX2 Texture FX2 SetFH-TFX2-MS Mini Series

Tiki Master by Dennis Mathewson FH-TM-1 Tribal TikiFH-TM-2 Kona TikiFH-TM-3 Tiki TroubleFH-TM-4 Tiki BarFH-TM-5 Totem TikiFH-TM-6 Aloha SpiritFH-TM-7 All Six FH-TM-7-MS Mini Series

Tiki Master II by Dennis Mathewson FH-TM-8 Tropic TribalsFH-TM-9 Hula SpiritFH-TM-10 Two Face TikiFH-TM-11 Tiki JoeFH-TM-12 Freakin' TikisFH-TM-13 LeilaniFH-TM-14 All Six FH-TM-14-MS Mini Series

Tikiville Nano Series by Dennis Mathewson FH-NS-6 Tikiville Nano Series Set

Tribal Master by Steve VandemonFH-TRM1 Tribal Master Set

Tribal Masters II by Steve VandemonFH-TRM2 Tribal Masters II Set

True Fire by Mike Lavallee FH-TF1 True Fire SetFH-TF1-MS Mini SeriesFH-NS-3 Nano Series

True Fire 2 Second Degree Burn by Mike Lavallee FH-TF2 True Fire 2 Second Degree Burn Set

Viking FX by Craig FraserFH-VKFX-1 RunesFH-VKFX-2 VahallaFH-VKFX-3 BerzerkerFH-VKFX-4 DraugarFH-VKFX-5 All FourFH-VKFX-5-MS Mini Series

The Wave Maker by Mark "The Shark" RushFH-8 The Wave Maker

Wired Long Lines Series by Dean LoucksFH-LL1 Wired Long Lines Series Set

Wood Grain FX by Dennis MathewsonFH-WGFX-1 Wood Grain FX

The Wrath of SkullMaster by Craig Fraser FH-SK26 Mr. Potato BonzFH-SK27 Mr. Potato Bonz Stuph #1FH-SK28 Mr. Potato Bonz Stuph #2FH-SK29 Burial GroundFH-SK30 KalaverasFH-SK31 Bonz IIIFH-SK32 All SixFH-SK32MS Mini Series

ARTOOL FREEHAND AIRBRUSH TEMPLATES (CONT'D)Flame-O-Rama by Craig Fraser FH-FOR-1SP Flame-DangoFH-FOR-2SP Ol’ SchoolFH-FOR-3SP SlashFH-FOR-4SP FunkadelikFH-FOR-5SP All FourFH-FOR-5SP-MS Mini Series

Flame-O-Rama 2 by Craig Fraser FH-FOR-6 Van FlaminFH-FOR-7 ClassicoFH-FOR-8 FirebalzFH-FOR-9 FlamgasmFH-FOR-10 GothikaFH-FOR-11 SpotFH-FOR-12 All SixFH-FOR-12 MS Mini Series

FX II by Craig FraserFX-II 8 PuzzledFX-II 9 Nut N’ BoltzFX-II 10 Gear HeadFX-II 11 Dolla’ BillFX-II 12 Dragon SkinFX-II 13 The BlobFX-II 14 All SixFX-II 14-MS Mini Series

FX 3 by Craig FraserFH-FX3-15 GlyphsFH-FX3-16 UnchainedFH-FX3-17 The WebFH-FX3-18 BladesFH-FX3-19 MusikaFH-FX3-20 BarbyFH-FX3-21 All SixFH-FX3-21-MS Mini Series

FX 4 by Craig FraserFH-FX4-22 WrenchedFH-FX4-23 FrondsFH-FX4-24 SRAEGFH-FX4-25 Classic CamoFH-FX4-26 Digital CamoFH-FX4-27 GatorFH-FX4-28 All SixFH-FX4-28MS Mini Series

Horror of SkullMaster by Craig Fraser FH-SK21 SP Heads UpFH-SK22 SP ScreamFH-SK23 SP ProfileFH-SK24 SP All ThreeFH-SK24 SP-MS Mini Series

Hot Headz by Mike LavalleFH-HH1 Smokin' JoesFH-HH2 Hell Riders

The "H" Stencil by Craig FraserFH-HS1 The "H" Stencil

Intro Series by Robert PaschalFH-IS1 Intro Series

Island FX Nano Series by Dennis Mathewson FH-NS-4 Island FX Nano Series Set

Kanji Master by Dennis MathewsonFH-KM1 DragonFH-KM2 KoiFH-KM3 TsunamiFH-KM4 BambooFH-KM5 Kanji MasksFH-KM6 Kanji SymbolsFH-KM7 All SixFH-KM-MS Mini Series

Kanji Motto Nano Series by Dennis MathewsonFH-NS-5 Kanji Motto Nano Series Set

Kustom FX by Craig Fraser FH-KFX-1SP Tiki MadnessFH-KFX-2SP Bullet-RiddenFH-KFX-3SP Cheetah PimpFH-KFX-4SP Diamond PlateFH-KFX-5SP Cloud-9FH-KFX-6SP BrainiacFH-KFX-7SP All SixFH-KFX-7SP-MS Mini Series

23.

Iwata Medea - Distributed in Canada byCanadian Precision Coatings Inc. 610 D, 70th Ave SE | Calgary AB | T2H 2J6

800.206.7815 (TF) | 587.320.6140 | 587.320.6141 (F)sales@cpcoatings.ca | www.cpcoatings.ca