L0 trigger update
Bruno AngelucciINFN & University of
Pisa
NA62 Physics & TDAQ WG – CERN 04/06/14
2
Outline
•“Feasible for first 2014 run” L0 trigger▫Detectors involved▫Signal handling▫Primitive generation
•L0 rates and efficiencies▫Study of crucial subdetectors parameters▫Rejecting power of vetoes
3
Introduction•Software used▫NA62MC and NA62Reconstruction rev301 100k πνν events + 100k of 6 K main decays + 4 muon
halo components + beam pions no accidentals
▫NA62MC and NA62Reconstruction rev314 10k πνν events + 10k of 6 K main decays accidentals superimposed to central event at
generation level (±150 ns)• L0 trigger Analyzer developed under NA62Analysis
FW
4
Detectors• RICH primitive
▫ Multiplicity counting hits in time bins Low and High multiplicity
• CHOD primitive▫ Coincidence in space (correspondent quadrants)▫ Coincidence in time▫ Multiplicity grouping coincidences in time bins
Max hit multiplicity Quad multiplicity
• MUV3 primitive▫ Time coincidence of 2 PMs of same pad
• LKr primitive▫ Combining cells in SuperCells (SC) in same time bin▫ Combining SCs in clusters: same time bin, adjacent▫ Thresholds both for cell and SC energy▫ 2 or more clusters in time
• LAV12 primitive▫ Hits with low and high threshold channels firing▫ Slewing timing correction▫ Offset of different layers
5
CHOD Primitive multiplicity
All πνν decays
Signal (πνν passing conditions)
6
LKr L0 efficiencies
7
Signal selection
•Kinematic requests▫15 <Pπ< 35 (GeV/c)▫105 < Zvtx < 165 (m)▫0 <M2
miss < 0.01 || 0.026 <M2miss < 0.068 (GeV2/c4)
•Acceptance requests▫No pion decay before LKr▫Pion in CHOD and MUV3 acceptance▫Pion not in LAVs acceptance
•Resulting πνν acceptance: order of 10%
8
L0 Parameters• The goal is to check efficiencies and rates varying one
parameter at a time keeping fixed all others•RICH▫Time bin▫Low multiplicity threshold▫High multiplicity threshold
•CHOD▫Time bin▫“Max” multiplicity threshold▫Quadrant multiplicity threshold
• LKr▫Cell energy threshold▫SuperCell energy threshold▫Time bin for cell time▫Δt for SC and cluster matching
• L0TP primitive matching time
9
No accidentals
10
With accidentals
11
With accidentals
12
With accidentals
13
No accidentals
14
With accidentals
15
L0 Parameters•RICH▫Time bin = 3.125 ns▫Low multiplicity threshold = 4▫High multiplicity threshold = 28
•CHOD▫Time bin = 1.5625 ns▫“Max” multiplicity threshold = 10▫Quadrant multiplicity threshold = 2
• LKr▫Cell energy threshold = 0.1 GeV▫SuperCell energy threshold = 0.7 GeV▫Time bin for cell time = 12.5 ns▫Δt for SC and cluster matching = ±6.25 ns
• L0TP primitive matching time = ±(1.5625,3.125) ns
16
Rejection powerWith accidentals
0: RICH & CHOD & !MUV3 & !LKr & !LAV1: RICH & CHOD & !LKr & !LAV
2: RICH & CHOD & !MUV3 & !LAV3: RICH & CHOD & !MUV3 & !LKr
No accidentals
17
Final results
•No accidentals▫Efficiency: 91.1±0.3 %▫Total rate: 360±11 kHz
•With accidentals (halo missing)▫Efficiency: 76.7±1.3 %▫Total rate: 425±15 kHz
18
Spares
19
With accidentals
20
With accidentals
21
With accidentals
22
With accidentals
23
With accidentals
24
With accidentals
25
With accidentals