L400 SeriesHYUNDAI WIA CNC Turning Center
The CNC Turning Center L400 series, designed by Hyundai WIA with years of expertise and the latest technology, is a Turning Center that maximizes productivity and performance.
Technical Leader
12″ 15″ BigBore Standard Long 10Station 12Station TurnMill
Spindle Bed Turret
● ○ ● ●
● ○ ● ● ●
● ○ ● ●
● ○ ● ●
● ○ ● ● ●
● ○ ● ● ●
MODEL
L400A
L400MA
L400C
L400LC
L400MC
L400LMC
Heavy-Duty, Large Work Capacity, CNC Turning Center
L400 Series● Sturdiness secured through box guideways.
● One-piece structure for high accuracy and sturdiness
● Pretensioned double anchored method provides high precision
● Main spindle heat displacement minimized
● Main spindle driven by 2-step gear box (L400MA : Belt)
● Optional big bore spindle is available (L400C series)
01 Basic FeaturesHigh Rigid Bed & Structure for Heavy Duty CNC Turning CenterL400 Series
Box GuidewayFor all axes of the L400 series, Box guideways provide unsurpassed long term rigidity and accuracy, even during heavy duty cutting.
2 Step Gear Box (L400MA:Belt)A two-step driving method is applied inside the main spindle as standard on non mill turrets. It provides powerful torque at low speeds and stable rotation at high speeds.
Ball ScrewTravel is stabilized by fastening both ends of the ball screw using the double anchored method. In particular, a large diameter ball screw with proper preload reinforces sturdiness and resistance to thermal displacement.
04
0302
High Precision, High Rigidity One-Piece StructureThe L400 features a 45° slant bed design which is developed through finite element analysis (FEA) to absorb vibration and minimize thermal growth. This ensures a stabilized platform for powerful, precise cutting capabilities.
01
Mill Turret (BMT75P)The BMT turret, with 4 screws solidly fastening the holder, shows outstanding performance in powerful cutting and is capable of machining complex products by using milling tools.
Ball-screwDeviation(Diameter)
Number of Positioning Repeated (Time)
Deviation (μm)
0103
04
05 0602
◉ Travel (X/Z) L400A | MA | C : 325/1,205mm (12.7″/47.4″), L400MC : 320/1,200mm (12.5″/47.2″), L400LC | LMC : 320/2,200mm (12.5″/86.6″)
PowerfulCuttingCapability&WideCuttingArea
04+
05
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
Basic Features
Main SpindleThe main spindle has become sturdier by enlarging the diameter and thickness. Rigidity and accuracy are maintained by adopting high precision angular ball bearing.
Built-in Tail StockBuilt-in type tail stock provides stabilized surface finish during heavy duty cutting.
0605
Main Spindle• The thermally symmetrical headstock has a special heat
insulation board which blocks the heat and maintains high accuracy during long and continuous operations.
• To accomplish advanced stability even during heavy duty cutting, a combination of P4 double cylindrical roller bearings and angular bearings are adopted.
• The double locking device separates the spindle bearing and pulley to prevent a decrease in spindle bearing pretension during interrupted cutting, heavy duty cutting, chuck cylinder operation, and by belt pulley tension.
C-Axis Control• C-axis control function and rotary tools are provided as
standard on the "M" type of L400 Series.
•OptionalGearlessSpindleisavailableinL400MC/LMCmodels,enablingthemachiningofvariousshapesinutmostquality.
Power(kW[HP]) Torque(N∙m[lbf∙ft])
37[49.6]
7.5[10]
44.7[33]35[25.8]
5.5[7.4]
2[2.7]
2,705[1,995]
786.2[579.9]
663.4[489.3]
2,194[1,618.2]
30[40.2]
32[42.9]
27[36.2]
389 1,500 1,833 3,000
469
2,705N∙m[1,995lbf∙ft] (30min)
2,194N∙m[1,618.2lbf∙ft] (Cont.)
7.5[10]6.3
[8.4]
71.6[52.8]
60[44.2]
71.6N∙m[52.8lbf∙ft] (S6-60%)
60N∙m[44.2lbf∙ft] (Cont.)
37kW[49.6HP] (30min)
30kW[40.2HP] (Cont.)
3,090[2,279]
2,579[1,902.2]
37[49.6]
30[40.2]
509
3,090N∙m[2,279lbf∙ft] (S6-60%)
2,579N∙m[1,902.2lbf∙ft] (Cont.)37.2kW[49.9HP] (S6-60%)
31kW[41.5HP] (Cont.)
1,782[1,314]
1,485[1,095.3]
26.4[35.4]
22[29.5]
471.7 707.5
1,782N∙m[1,314.3lbf∙ft] (S6-60%)
1,485N∙m[1,095.3lbf∙ft] (Cont.)
26.4kW[35.4HP] (S6-60%)
22kW[29.5HP] (Cont.)
7.5kW[10HP] (S6-60%)
6.3kW[8.4HP] (Cont.)
26[34.5]
1,325[977.3]
1,120[826]
797[587.8]585[431.5]
22[29.5]
10[13.4]
26[34.5]
1,753[1,293]
1,483[1,094]
22[29.5]
10[13.4]
30[22.1]
20[14.7]
10[13.4]
1,325N∙m[977.3lbf∙ft] (30min, S3 60%)
1,753N∙m[1,293lbf∙ft] (30min, S3 60%)
797N∙m[587.8lbf∙ft] (30min, S3 60%)
1,120N∙m[826lbf∙ft] (Cont.)
1,483N∙m[1,094lbf∙ft] (Cont.)
585N∙m[431.5lbf∙ft] (Cont.)26kW[34.5HP](30min, S3 60%)
22kW[29.5HP](Cont.)
26kW[34.5HP](30min, S3 60%)
22kW[29.5HP](Cont.)
7.5kW[10HP](30min, S3 60%)
5.5kW[7.4HP](Cont.)
3,073N∙m[2,266.5lbf∙ft] (30min, S3 60%)
2,490N∙m[1,836.5lbf∙ft] (Cont.)37kW[49.6HP](30min, S3 60%)
30kW[40.2HP](Cont.)
30kW[22.1HP] (30min, S3 60%)
20kW[14.7HP] (Cont.)
0 187.5 750 1,500 3,000
0 142 565 620 1,000 2,000
0
0 1,500 4,000
131 398 523 1,500
0 0359 1,875 2,5001,500 3,000
L400A Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MA Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MA
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C
Power(kW[HP]) Torque(N∙m[lbf∙ft])TURN MILL
Power(kW[HP]) Torque(N∙m[lbf∙ft])TURN MILL
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C Big Bore
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MC/LC/LMC
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MC/LMC
Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min)
0 1,000 4,0003,000
Spindle Speed (r/min)
37[49.6]
3,073[2,266]
2,490[1,836.5]
30[40.2]
20[26.8]
10[13.4]
0 115 360 460 1,000 2,000 0 141.5 617 2,000
0 115 617 2,000
Spindle Speed (r/min) Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min) Spindle Speed (r/min)
786.2N∙m[579.9lbf∙ft] (S6-60%)
663.4N∙m[489.3lbf∙ft] (Cont.)
32kW[42.9HP] (S6-60%)27kW[36.2HP] (Cont.)
44.7N∙m[33lbf∙ft] (30min, S3 60%)
35N∙m[25.8lbf∙ft] (Cont.)
SIEMENSMotor
02 High Precision SpindleLong Lasting High Accuracy & Excellent PerformanceCNC Turning CenterL400 Series
Power(kW[HP]) Torque(N∙m[lbf∙ft])
37[49.6]
7.5[10]
44.7[33]35[25.8]
5.5[7.4]
2[2.7]
2,705[1,995]
786.2[579.9]
663.4[489.3]
2,194[1,618.2]
30[40.2]
32[42.9]
27[36.2]
389 1,500 1,833 3,000
469
2,705N∙m[1,995lbf∙ft] (30min)
2,194N∙m[1,618.2lbf∙ft] (Cont.)
7.5[10]6.3
[8.4]
71.6[52.8]
60[44.2]
71.6N∙m[52.8lbf∙ft] (S6-60%)
60N∙m[44.2lbf∙ft] (Cont.)
37kW[49.6HP] (30min)
30kW[40.2HP] (Cont.)
3,090[2,279]
2,579[1,902.2]
37[49.6]
30[40.2]
509
3,090N∙m[2,279lbf∙ft] (S6-60%)
2,579N∙m[1,902.2lbf∙ft] (Cont.)37.2kW[49.9HP] (S6-60%)
31kW[41.5HP] (Cont.)
1,782[1,314]
1,485[1,095.3]
26.4[35.4]
22[29.5]
471.7 707.5
1,782N∙m[1,314.3lbf∙ft] (S6-60%)
1,485N∙m[1,095.3lbf∙ft] (Cont.)
26.4kW[35.4HP] (S6-60%)
22kW[29.5HP] (Cont.)
7.5kW[10HP] (S6-60%)
6.3kW[8.4HP] (Cont.)
26[34.5]
1,325[977.3]
1,120[826]
797[587.8]585[431.5]
22[29.5]
10[13.4]
26[34.5]
1,753[1,293]
1,483[1,094]
22[29.5]
10[13.4]
30[22.1]
20[14.7]
10[13.4]
1,325N∙m[977.3lbf∙ft] (30min, S3 60%)
1,753N∙m[1,293lbf∙ft] (30min, S3 60%)
797N∙m[587.8lbf∙ft] (30min, S3 60%)
1,120N∙m[826lbf∙ft] (Cont.)
1,483N∙m[1,094lbf∙ft] (Cont.)
585N∙m[431.5lbf∙ft] (Cont.)26kW[34.5HP](30min, S3 60%)
22kW[29.5HP](Cont.)
26kW[34.5HP](30min, S3 60%)
22kW[29.5HP](Cont.)
7.5kW[10HP](30min, S3 60%)
5.5kW[7.4HP](Cont.)
3,073N∙m[2,266.5lbf∙ft] (30min, S3 60%)
2,490N∙m[1,836.5lbf∙ft] (Cont.)37kW[49.6HP](30min, S3 60%)
30kW[40.2HP](Cont.)
30kW[22.1HP] (30min, S3 60%)
20kW[14.7HP] (Cont.)
0 187.5 750 1,500 3,000
0 142 565 620 1,000 2,000
0
0 1,500 4,000
131 398 523 1,500
0 0359 1,875 2,5001,500 3,000
L400A Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MA Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MA
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C
Power(kW[HP]) Torque(N∙m[lbf∙ft])TURN MILL
Power(kW[HP]) Torque(N∙m[lbf∙ft])TURN MILL
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C Big Bore
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MC/LC/LMC
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MC/LMC
Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min)
0 1,000 4,0003,000
Spindle Speed (r/min)
37[49.6]
3,073[2,266]
2,490[1,836.5]
30[40.2]
20[26.8]
10[13.4]
0 115 360 460 1,000 2,000 0 141.5 617 2,000
0 115 617 2,000
Spindle Speed (r/min) Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min) Spindle Speed (r/min)
786.2N∙m[579.9lbf∙ft] (S6-60%)
663.4N∙m[489.3lbf∙ft] (Cont.)
32kW[42.9HP] (S6-60%)27kW[36.2HP] (Cont.)
44.7N∙m[33lbf∙ft] (30min, S3 60%)
35N∙m[25.8lbf∙ft] (Cont.)
Power(kW[HP]) Torque(N∙m[lbf∙ft])
37[49.6]
7.5[10]
44.7[33]35[25.8]
5.5[7.4]
2[2.7]
2,705[1,995]
786.2[579.9]
663.4[489.3]
2,194[1,618.2]
30[40.2]
32[42.9]
27[36.2]
389 1,500 1,833 3,000
469
2,705N∙m[1,995lbf∙ft] (30min)
2,194N∙m[1,618.2lbf∙ft] (Cont.)
7.5[10]6.3
[8.4]
71.6[52.8]
60[44.2]
71.6N∙m[52.8lbf∙ft] (S6-60%)
60N∙m[44.2lbf∙ft] (Cont.)
37kW[49.6HP] (30min)
30kW[40.2HP] (Cont.)
3,090[2,279]
2,579[1,902.2]
37[49.6]
30[40.2]
509
3,090N∙m[2,279lbf∙ft] (S6-60%)
2,579N∙m[1,902.2lbf∙ft] (Cont.)37.2kW[49.9HP] (S6-60%)
31kW[41.5HP] (Cont.)
1,782[1,314]
1,485[1,095.3]
26.4[35.4]
22[29.5]
471.7 707.5
1,782N∙m[1,314.3lbf∙ft] (S6-60%)
1,485N∙m[1,095.3lbf∙ft] (Cont.)
26.4kW[35.4HP] (S6-60%)
22kW[29.5HP] (Cont.)
7.5kW[10HP] (S6-60%)
6.3kW[8.4HP] (Cont.)
26[34.5]
1,325[977.3]
1,120[826]
797[587.8]585[431.5]
22[29.5]
10[13.4]
26[34.5]
1,753[1,293]
1,483[1,094]
22[29.5]
10[13.4]
30[22.1]
20[14.7]
10[13.4]
1,325N∙m[977.3lbf∙ft] (30min, S3 60%)
1,753N∙m[1,293lbf∙ft] (30min, S3 60%)
797N∙m[587.8lbf∙ft] (30min, S3 60%)
1,120N∙m[826lbf∙ft] (Cont.)
1,483N∙m[1,094lbf∙ft] (Cont.)
585N∙m[431.5lbf∙ft] (Cont.)26kW[34.5HP](30min, S3 60%)
22kW[29.5HP](Cont.)
26kW[34.5HP](30min, S3 60%)
22kW[29.5HP](Cont.)
7.5kW[10HP](30min, S3 60%)
5.5kW[7.4HP](Cont.)
3,073N∙m[2,266.5lbf∙ft] (30min, S3 60%)
2,490N∙m[1,836.5lbf∙ft] (Cont.)37kW[49.6HP](30min, S3 60%)
30kW[40.2HP](Cont.)
30kW[22.1HP] (30min, S3 60%)
20kW[14.7HP] (Cont.)
0 187.5 750 1,500 3,000
0 142 565 620 1,000 2,000
0
0 1,500 4,000
131 398 523 1,500
0 0359 1,875 2,5001,500 3,000
L400A Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MA Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MA
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C
Power(kW[HP]) Torque(N∙m[lbf∙ft])TURN MILL
Power(kW[HP]) Torque(N∙m[lbf∙ft])TURN MILL
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C Big Bore
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MC/LC/LMC
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MC/LMC
Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min)
0 1,000 4,0003,000
Spindle Speed (r/min)
37[49.6]
3,073[2,266]
2,490[1,836.5]
30[40.2]
20[26.8]
10[13.4]
0 115 360 460 1,000 2,000 0 141.5 617 2,000
0 115 617 2,000
Spindle Speed (r/min) Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min) Spindle Speed (r/min)
786.2N∙m[579.9lbf∙ft] (S6-60%)
663.4N∙m[489.3lbf∙ft] (Cont.)
32kW[42.9HP] (S6-60%)27kW[36.2HP] (Cont.)
44.7N∙m[33lbf∙ft] (30min, S3 60%)
35N∙m[25.8lbf∙ft] (Cont.)
FANUCMotor
06+
07
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
Spindle
03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret L400 Series
TurretThe L400 Series’ large 12-station turret provides left or right facing tools in all positions.The Bi-directional rotation turret is attached to a Ø260 (Ø10.2") diameter curvic coupling and is driven by a high torque motor. 1/8,000degree repeatability under 11tons of clamping force enables high precision machining and heavy duty cutting.
◉ Number of Tool : 12EA◉ Tool Size (O.D/I.D) □25/Ø50 (□1″/Ø1.9″)◉ Indexing Time : 0.2 sec/step
◉ Number of Tool : 10EA◉ Tool Size (O.D/I.D) □32/Ø50 (□1.2″/Ø1.9″)◉ Indexing Time : 0.2 sec/step
L400A
L400C/LC
12
1011
21
4
3
8
9
67
5
12
1011
21
4
3
8
9
67
5
08+
09
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
Turret
Mill Tool HolderMachining capability is increased with the addition of a Straight Milling Head which can remove material from the side and an Angular Milling Head which can perform I.D. operations.
The BMT75 turret is provided as standard for the "M" type of L400 Series, enhancing high precision milling process.
Mill turrets is driven by a high torque servo motor with a 0.2 second indexing time in either direction.
◉ Number of Tool : 12EA◉ Tool Size (O.D/I.D) : □25/Ø50 (□1″/Ø1.9″)◉ Indexing Time : 0.2 sec/step
◉ Number of Tool : 12EA◉ Tool Size (O.D/I.D) : □32 / Ø63 (□1.2″/Ø2.4″)◉ Indexing Time : 0.2 sec/step
L400MA
L400MC/LMC
Angular Milling HeadStraight Milling Head
Mill Turret (BMT)
◉ Output (Max./Cont.) : 7.5/5.5 kW (10/7.4 HP)
◉ Speed (rpm) : 4,000 r/min◉ Collet size :Ø26 (Ø1″) (ER40)◉ Live Tool Type : BMT75P
Power(kW[HP]) Torque(N∙m[lbf∙ft])
37[49.6]
7.5[10]
44.7[33]35[25.8]
5.5[7.4]
2[2.7]
2,705[1,995]
786.2[579.9]
663.4[489.3]
2,194[1,618.2]
30[40.2]
32[42.9]
27[36.2]
389 1,500 1,833 3,000
469
2,705N∙m[1,995lbf∙ft] (30min)
2,194N∙m[1,618.2lbf∙ft] (Cont.)
7.5[10]6.3
[8.4]
71.6[52.8]
60[44.2]
71.6N∙m[52.8lbf∙ft] (S6-60%)
60N∙m[44.2lbf∙ft] (Cont.)
37kW[49.6HP] (30min)
30kW[40.2HP] (Cont.)
3,090[2,279]
2,579[1,902.2]
37[49.6]
30[40.2]
509
3,090N∙m[2,279lbf∙ft] (S6-60%)
2,579N∙m[1,902.2lbf∙ft] (Cont.)37.2kW[49.9HP] (S6-60%)
31kW[41.5HP] (Cont.)
1,782[1,314]
1,485[1,095.3]
26.4[35.4]
22[29.5]
471.7 707.5
1,782N∙m[1,314.3lbf∙ft] (S6-60%)
1,485N∙m[1,095.3lbf∙ft] (Cont.)
26.4kW[35.4HP] (S6-60%)
22kW[29.5HP] (Cont.)
7.5kW[10HP] (S6-60%)
6.3kW[8.4HP] (Cont.)
26[34.5]
1,325[977.3]
1,120[826]
797[587.8]585[431.5]
22[29.5]
10[13.4]
26[34.5]
1,753[1,293]
1,483[1,094]
22[29.5]
10[13.4]
30[22.1]
20[14.7]
10[13.4]
1,325N∙m[977.3lbf∙ft] (30min, S3 60%)
1,753N∙m[1,293lbf∙ft] (30min, S3 60%)
797N∙m[587.8lbf∙ft] (30min, S3 60%)
1,120N∙m[826lbf∙ft] (Cont.)
1,483N∙m[1,094lbf∙ft] (Cont.)
585N∙m[431.5lbf∙ft] (Cont.)26kW[34.5HP](30min, S3 60%)
22kW[29.5HP](Cont.)
26kW[34.5HP](30min, S3 60%)
22kW[29.5HP](Cont.)
7.5kW[10HP](30min, S3 60%)
5.5kW[7.4HP](Cont.)
3,073N∙m[2,266.5lbf∙ft] (30min, S3 60%)
2,490N∙m[1,836.5lbf∙ft] (Cont.)37kW[49.6HP](30min, S3 60%)
30kW[40.2HP](Cont.)
30kW[22.1HP] (30min, S3 60%)
20kW[14.7HP] (Cont.)
0 187.5 750 1,500 3,000
0 142 565 620 1,000 2,000
0
0 1,500 4,000
131 398 523 1,500
0 0359 1,875 2,5001,500 3,000
L400A Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MA Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MA
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C
Power(kW[HP]) Torque(N∙m[lbf∙ft])TURN MILL
Power(kW[HP]) Torque(N∙m[lbf∙ft])TURN MILL
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C Big Bore
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MC/LC/LMC
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400C
Power(kW[HP]) Torque(N∙m[lbf∙ft])L400MC/LMC
Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min)
0 1,000 4,0003,000
Spindle Speed (r/min)
37[49.6]
3,073[2,266]
2,490[1,836.5]
30[40.2]
20[26.8]
10[13.4]
0 115 360 460 1,000 2,000 0 141.5 617 2,000
0 115 617 2,000
Spindle Speed (r/min) Spindle Speed (r/min)
Spindle Speed (r/min)
Spindle Speed (r/min) Spindle Speed (r/min)
786.2N∙m[579.9lbf∙ft] (S6-60%)
663.4N∙m[489.3lbf∙ft] (Cont.)
32kW[42.9HP] (S6-60%)27kW[36.2HP] (Cont.)
44.7N∙m[33lbf∙ft] (30min, S3 60%)
35N∙m[25.8lbf∙ft] (Cont.)
04 Machining CapabilityExcellent Performance, High Accuracy CuttingCNC Turning CenterL400 Series
❖ The above results might be different by types of processing circumstances.
Machining Variation
Sample Workpiece
L400MA
10+
11
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
Machining
Drilling
ToolDia.SpindlespeedCuttingdepthForwardingspeed(Rev.)CuttingspeedChipdischarge
Ø40214 r/min80 mm0.36 mm/rev27 m/min774 cc/min
〈Material〈JIS〉:S45C(Carbon steel〉
End Milling〈Material〈JIS〉:S45C(Carbon steel〉
ToolspeedCuttingspeedForwardingspeed(Min.)Forwardingspeed(Feed)CuttingdepthChipdischarge
1000 r/min63 m/min200 mm/min0.1 mm/f4.0 mm16 cc/min
Tapping〈Material〈JIS〉:S45C(Carbon steel〉
TapsizeToolspeedCuttingspeedForwardingspeed(Min.)Forwardingspeed(Rev.)Cuttingdepth
M20×2.5127r/min8m/min317mm/min2.5mm/rev30mm
Drilling〈Material〈JIS〉:S45C(Carbon steel〉
ToolspeedCuttingspeedForwardingspeed(Min.)Forwardingspeed(Rev.)CuttingdepthChipdischarge
390 r/min27 m/min117mm/min0.3mm/rev40mm44cc/min
OD Cutting〈Material〈JIS〉:S45C(Carbon steel〉
WorkpieceSpindlespeedCuttingdepthForwardingspeed(Rev.)CuttingspeedChipdischarge
Ø276284 r/min8 mm0.45mm/rev232 m/min835 cc/min O.D Cutting
Face Milling
Drilling
End Milling
I.D Cutting
O.D Hole Drilling
I.D Threading
Ball-End Milling
Machine Monitoring
Energy SavingIntelligent Machining
Easy Programming
HW-MMS HW
-ESS
HW-DPRO T/TM
User Friendly
HW-TM
HYUNDAI WIA Smart System for CNC Turning Center
User Convenience
HW-eDNC
HW-MCG
HW-PGi F (HYUNDAIWIAProgrammingGuideiforFanucSystem)(StandardwhenapplyingFANUC32i)
Realistic 3D solid animationProgramming simulation
Example of easy programmingEasy programming interactively
without code
Engraving CycleProgramming with only entering text by
controlling C-axis
05 Smart SystemSoftware for Smart Operating and MachiningL400 Series
12+
13
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.
HYUNDAI WIA Smart System
HW-TMHYUNDAIWIAToolMonitoring
A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.
(FANUC)
HW-DPRO T/TMHYUNDAIWIADialoguePROgramTurn/TurnMill
Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)
HW-MMSHYUNDAIWIAMachineMonitoringSystem
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple machines and the progress of processing on a real time basis.
HW-ESSHYUNDAIWIAEnergySavingSystem
An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.
(FANUC)
HW-eDNCHYUNDAIWIAethernetDirectNumericalControl
This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.
HW-MCGHYUNDAIWIAMachineGuidance
Software that offers operation, maintenance, management monitoring and various user friendly features.
(FANUC)
USB Port (HWFANUCiSeries&SIEMENS828D)Convenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN.
DIFFERENTIATED CAPABILITIES, INTEGRATED ENGINEERING PERFECTLY INTERLINKEDSIEMENS 828D is a latest model CNC. It is designed for horizontal/vertical all-purpose equipments.
Its 80-bit control reduces processing time and increases productivity. The 828D is easy to maintain and run, with its easy setup functions.
• Dialogue-type programming, simple and convenient
• Effective specifications for small quantity batch production
• Step-by-step operation possible without knowledge of the DIN/ISO code
Shop Turn
• 3D confirmation of the completed processing configuration of the NC program is possible.
•Offers standards for 2D simulation.• Possible to confirm the simulation of the
NC grogram during processing.
3D Simulation
• Easy to install/uninstall an option (Ex : barfeeder and chip conveyor, etc.)
• Possible to install in one motion without revision of individual perimeters.
• A spate list is unnecessary as option items are indicated with letters.
Easy Extend
Easy input/output of a program is possible as a USB memory card, a CF memory card and LAN can all be used.
RJ 45 Ethernet
USB 2.0
Compact Flash Card
Variable Communication Port
If the ISO Dialect (G291) is ordered, JIS-based G-code programs can be used. (Standard)
SIEMENS Technology SIEMENS Communication Function
ISO CodeProgramming
14+
15
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
SIEMENS Convenience Function SIEMENS Easy Programming
• Easy calculation (automatic and manual) of the offset values of the installed equipment
• Automatic input of the measured offset values of equipment into the equipment list
Easy Tool Measuring
• Supports the function of work offset calculation
• Automatic application of the measured work offset value as the activated work offset
Work Offset Measuring
• Real time monitoring of PLC programs is possible. Supports the “search” and “cross reference” functions.
• Real time verification of NC variables and PLC interface
• Input/change of the values of variables
Real Time PLC Monitoring
• Program can be re-started from a particular location without editing the processing program.
• Provides safety to the user.
Block Searching
• A maximum of 500 alarms can be stored. • The entire alarm log can be stored as a
data file in the NC • The overall alarm history can be checked
through the alarm log.
Alarm Log
•Useofcycleprogramminimizesprogramcapacity.•Whencyclevariablesareinput,graphicimagesareprovided.•Toolpathandsimulationofcompletedcycleprogramareavailable.•Variousconfigurationscanbeprocessedusingcycles.
•Letterscanbeprocessedonproductsbyestablishingaplaneandinputtingletters.•Lettersize/angle/location/directioncanbedesignated.•CapitalandsmalllettersofEnglishcanbeprocessed.
Program Guide SimpleProgram,HighProductivity
Engraving CycleSimpleLetterProcessingisPossible.
Controller
06 User ConvenienceVarious Devices for User ConvenienceL400 SeriesSteady Rest Auto Q-Setter
For long parts, such as shafts, the steady rest increases rigidity and minimizes vibration.
When using the Programmable Hydraulic Steady Rest option, the position of the steady rest can be adjusted by the alignment pin connected to the turret. This option enhances the efficiency of the machining process.
Quick and accurate tool calibration can be done by contacting the tool tip with the sensor. This process is done easily with the use of M-Code and the calibration process takes roughly 30 seconds.
Chuck Type Tail Stock
Tail Stock
When machining materials with a center hole and the use of tail stock is not possible, chuck type tail stock can be used to ensure stable machining.
The built-in tail stock ensures high accuracy even during heavy duty cutting and can be controlled automatically or manually.
Chuck Size : 10″ Spindle Speed : 3,000rpmQuill Dia. : Ø75 (Ø2.9″)
❖L400A/MA/C:MT#5Built-InTailStock(Option)
L400A/MA/C
Taper : MT#4Quill Dia. : Ø100 (Ø3.9″)Quill Travel : 130 mm (5.1″)
L400LC/MC/LMC
Taper : MT#5 (Built-in)Quill Dia. : Ø150(5.9″)Quill Travel : 132 mm (5.2″)
Door Inter-LockTotal Splash GuardChuck hydraulic pressure maintenance interlockBack Spin Torque Limiter (BST : FANUC)Torque LimiterElectric DeviceCall LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPG
Spindle Load meter
Spindle Speed meter
WorkcounterTotalcounterToolcounter
Multi-Tool counter
Electric Circuit BreakerAVR(Auto Voltage Regulator)
Transformer
Auto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)Environment
Air Conditioner
DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)Extra M-Code 4eaAutomation Interface
I/O Extension (IN & OUT)
Parts CatcherTurret Work Pusher (For Automation)Hyd. DeviceStandard Hyd. Cylinder
Standard Hyd. Unit
S/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC Software (HW-eDNC : FANUC)Interactive ProgrammingEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
FANUC (Mounted Type)SIEMENS (Built-in Type)FANUC (Mounted Type)SIEMENS (Built-in Type)DigitalDigitalDigital6EA9EA
35kVA40kVA50kVA60kVA
TACOSMC
X AxisZ Axis
FANUC (Mounted Type)SIEMENS (Built-in Type)
High Speed
16Contact32ContactMain SP.
Hollow60bar(870psi) / 13ℓ(3.4gal)60bar(870psi) / 20ℓ(5.3gal)
Need Munsel No.
Standard & Optional
Main SpindleHollow Chuck 3 Jaw
Main SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside StopperMain Spindle 5° IndexC-axis (0.001°)Cs contouring functionChuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderDodecagon TurretDecagon TurretMill TurretStraight Milling Head (Radial)Angular Milling Head (Axial)Straight Milling Head (Radial)Angular Milling Head (Axial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveExtension HolderSwievel HeadTail Stock & Steady RestBuilt-In Tail StockProgramable Tail Stock (MT #4)Programable Tail Stock (MT #5)Manual Type Steady RestManual Type Hyd. Steady RestProgramable Hyd. Steady RestStandard Dead Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantThrough Spindle Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow(Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunThrough Spindle Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)Coolant ChillerChip Disposal
Coolant Tank
Chip Conveyor Hinge(Tank Position/Chip Disposal) ScraperSpecial Chip Conveyor (Drum Filter)
Chip Wagon
12″15″18″ (Big Bore)21″ (Big Bore)12″15″
RadialCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type
For Out-Dia
4.5Bar (65.2psi)6Bar (87psi)20Bar (290psi)
300ℓ(79.3 gal)400ℓ(105.7 gal)
Front (Right)
Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized
Spindle & Chuck Safety Device
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
L400A L400MA ● ● ○ ○ - - - - ☆ ☆ ☆ ☆ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● - ● ○(CE:●) ○(CE:●) ☆ ☆ ● ● ● ● - - - ● - - - - - - - - ● ● ● ● ○ ○ ○ ○ ☆ - - ☆ ● ● ● ● ○ ○ ☆ ☆ ○ ○ ○ ○ ● ● ☆ ☆ ○ ○ ○ ○ ● ● ☆ ☆ ○ ○ ☆ ☆ - - ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ● - -
○ ○
☆ ☆
○ ○
○ ○
○ ○
○ ○
☆ ☆
Prior consultation is required when applying spindle contouring control for gear driven spindle.Specifications are subject to change without notice for improvement.
16+
17
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
SPECIFICATIONS
L400A L400MA ● ● ● ● ○(CE:●) ○(CE:●) ● ● ☆ ☆ ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ● ○ ○ - ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ - - - - ○ - - ○ ○ - - ● ● ☆ ☆ ☆ ☆ ☆ ☆ ○ ○ - - ☆ ☆ ○ ○ - ● ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ - - ☆ ☆ - - - - ○ ○ ☆ ☆ ○ ○ ○ ○ - - ☆ ☆ ● ●
- -
● ●
☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ● ☆ ☆ ☆ ☆
SPECIFICATIONS
Prior consultation is required when applying spindle contouring control for gear driven spindle.Specifications are subject to change without notice for improvement.
Door Inter-LockTotal Splash GuardChuck hydraulic pressure maintenance interlockBack Spin Torque Limiter (BST : FANUC)Torque LimiterElectric DeviceCall LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPG
Spindle Load meter
Spindle Speed meter
WorkcounterTotalcounterToolcounter
Multi-Tool counter
Electric Circuit BreakerAVR(Auto Voltage Regulator)
Transformer
Auto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)Environment
Air Conditioner
DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)Extra M-Code 4eaAutomation Interface
I/O Extension (IN & OUT)
Parts CatcherTurret Work Pusher (For Automation)Hyd. DeviceStandard Hyd. Cylinder
Standard Hyd. Unit
S/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC Software (HW-eDNC : FANUC)Interactive ProgrammingEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
FANUC (Mounted Type)SIEMENS (Built-in Type)FANUC (Mounted Type)SIEMENS (Built-in Type)DigitalDigitalDigital6EA9EA
35kVA40kVA50kVA60kVA
TACOSMC
X AxisZ Axis
FANUC (Mounted Type)SIEMENS (Built-in Type)
High Speed
16Contact32ContactMain SP.
Hollow60bar(870psi) / 13ℓ(3.4gal)60bar(870psi) / 20ℓ(5.3gal)
Need Munsel No.
Standard & Optional
Main SpindleHollow Chuck 3 Jaw
Main SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside StopperMain Spindle 5° IndexC-axis (0.001°)Cs contouring functionChuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderDodecagon TurretDecagon TurretMill TurretStraight Milling Head (Radial)Angular Milling Head (Axial)Straight Milling Head (Radial)Angular Milling Head (Axial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveExtension HolderSwievel HeadTail Stock & Steady RestBuilt-In Tail StockProgramable Tail Stock (MT #4)Programable Tail Stock (MT #5)Manual Type Steady RestManual Type Hyd. Steady RestProgramable Hyd. Steady RestStandard Dead Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantThrough Spindle Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow(Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunThrough Spindle Air Blow (Only for Special Chuck)
High Pressure Coolant
Power Coolant System (For Automation)Coolant ChillerChip Disposal
Coolant Tank
Chip Conveyor Hinge(Tank Position/Chip Disposal) ScraperSpecial Chip Conveyor (Drum Filter)
Chip Wagon
12″15″18″ (Big Bore)21″ (Big Bore)12″15″
RadialCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type
For Out-Dia
4.5Bar (65.2psi)6Bar (87psi)20Bar (290psi)
300ℓ(79.3 gal)400ℓ(105.7 gal)
Front (Right)
Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized
Spindle & Chuck Safety Device
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
L400C/LC L400MC/LMC - - ● ● ○ ○ ○ ○ - - ☆ ☆ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● - ☆ ○(CE:●) ○(CE:●) ☆ ☆ ● ● - ● ● - - ● - - - - - - - - ● ● ● ● ○ ○ ○ ○ ☆ - - ☆ ● ● - - ● ● ☆ ☆ ○ ○ ○ ○ ● ● ☆ ☆ ○ ○ ○ ○ ● ● ☆ ☆ ○ ○ ☆ ☆ - - ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ ☆ ☆ ●/- ●/- -/● -/●
○ ○
☆ ☆
○ ○
○ ○
○ ○
○ ○
☆ ☆
L400C/LC L400MC/LMC ● ● ● ● ○(CE:●) ○(CE:●) ● ● ☆ ☆ ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ○ ○ ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ - - ○/- - -/○ - - ○ ○ ○ - - ● ● ☆ ☆ ☆ ☆ ☆ ☆ ○ ○ - - ☆ ☆ ○ ○ ● ● ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ - - ☆ ☆ - - - - ○ ○ ☆ ☆ ○ ○ ○ ○ - - ☆ ☆ ● ●
- -
● ●
☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ● ☆ ☆ ☆ ☆
18+
19
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
SPECIFICATIONS
unit : mm(in)External Dimensions
L400A/MA/C/MC (SLUB5 Steady Rest Application)
214
(8.4
)
470
(18.
5)35
9(15
.6)
2147
(84.
5)
1040 (40.9)
762 (30)
590 (23.2)515 (20.3)
2244 (88.3)2319 (91.3)
822
(32.
3)
400(15.7)
214
(8.4
)
720 (28.3)(Auto Door)
(Auto Door Left) (Auto Door Right)
1124
(44.
2)
395
(15.
6)47
0 (1
8.5)
980 (38.6)
702 (27.6)
525 (20.6)2282 (89.8)
450 (17.7)2207 (86.9)
400(15.7)
792
(31.
2)
2035
(80.
1)21
10 (8
3)
: Expand Type Coolant Tank
unit : mm(in)External Dimensions
L400LC/LMC (SLUB5 Steady Rest Application)
SPECIFICATIONS
214
(8.4
)
470
(18.
5)35
9(15
.6)
2147
(84.
5)
1040 (40.9)
762 (30)
590 (23.2)515 (20.3)
2244 (88.3)2319 (91.3)
822
(32.
3)
400(15.7)
214
(8.4
)
720 (28.3)(Auto Door)
(Auto Door Left) (Auto Door Right)
1124
(44.
2)
395
(15.
6)47
0 (1
8.5)
980 (38.6)
702 (27.6)
525 (20.6)2282 (89.8)
450 (17.7)2207 (86.9)
400(15.7)
792
(31.
2)
2035
(80.
1)21
10 (8
3)
: Expand Type Coolant Tank
20+
21
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
SPECIFICATIONS
unit : mm(in)Tooling System
BMT 75P12 Stations
10 Stations
StraightMill Holder
O.D Holder
Boring Holder
Boring Holder
O.D Holder
Facing Holder
Milling Collet
Outside
Grooving
Threading
Boring BarSocket
Boring Bar
Drill
12 Stations
Boring Holder
O.D Holder
Facing Holder
Outside
Grooving
Threading
Boring BarSocket
Boring Bar
Drill
Tap
End Mill
Center Drill
Drill
Reamer
Facing Holder
O.D Tool
Boring Bar
Drill
U-Drill
AngularMill Holder
Plug
Boring BarSocket
Right/Left
Single
C-Clip
Tool Holder
Standard
Standard
Long
Ø16 (5/8″)
Ø20 (3/4″)
Ø25 (1″)
Ø32 (1 1/4″)
Ø40 (1 1/2″)
Ø50 (2″)
MT 2
MT 3
MT 4
Ø16 (5/8″)
Ø20 (3/4″)
Ø25 (1″)
Ø32 (1 1/4″)
Ø40 (1 1/2″)
O.D Holder
Facing Holder
I.D Holder
U-Drill Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
C-CLIP Boring (Opt.)
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM L400A
1
1
5
Opt
Opt
-
-
-
1
1
1
1
1
-
-
1
-
1
1
1
1
1
Tooling Parts Detail
Specifications are subject to change without notice for improvement.
L400A
unit : mm(in)Tooling System
SPECIFICATIONS
BMT 75P12 Stations
10 Stations
StraightMill Holder
O.D Holder
Boring Holder
Boring Holder
O.D Holder
Facing Holder
Milling Collet
Outside
Grooving
Threading
Boring BarSocket
Boring Bar
Drill
12 Stations
Boring Holder
O.D Holder
Facing Holder
Outside
Grooving
Threading
Boring BarSocket
Boring Bar
Drill
Tap
End Mill
Center Drill
Drill
Reamer
Facing Holder
O.D Tool
Boring Bar
Drill
U-Drill
AngularMill Holder
Plug
Boring BarSocket
Right/Left
Single
C-Clip
Tool Holder
Standard
Standard
Long
Ø16 (5/8″)
Ø20 (3/4″)
Ø25 (1″)
Ø32 (1 1/4″)
Ø40 (1 1/2″)
Ø50 (2″)
MT 2
MT 3
MT 4
Ø16 (5/8″)
Ø20 (3/4″)
Ø25 (1″)
Ø32 (1 1/4″)
Ø40 (1 1/2″)
O.D Holder
Facing Holder
I.D Holder
U-Drill Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
C-CLIP Boring (Opt.)
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM L400C/LC
1
1
4
Opt
Opt
-
-
-
1
1
1
1
1
-
-
1
-
1
1
1
1
1
Tooling Parts Detail
Specifications are subject to change without notice for improvement.
L400C/LC
22+
23
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
SPECIFICATIONS
unit : mm(in)Tooling System
BMT 75P12 Stations
10 Stations
StraightMill Holder
O.D Holder
Boring Holder
Boring Holder
O.D Holder
Facing Holder
Milling Collet
Outside
Grooving
Threading
Boring BarSocket
Boring Bar
Drill
12 Stations
Boring Holder
O.D Holder
Facing Holder
Outside
Grooving
Threading
Boring BarSocket
Boring Bar
Drill
Tap
End Mill
Center Drill
Drill
Reamer
Facing Holder
O.D Tool
Boring Bar
Drill
U-Drill
AngularMill Holder
Plug
Boring BarSocket
Right/Left
Single
C-Clip
Tool Holder
Standard
Standard
Long
Ø16 (5/8″)
Ø20 (3/4″)
Ø25 (1″)
Ø32 (1 1/4″)
Ø40 (1 1/2″)
Ø50 (2″)
MT 2
MT 3
MT 4
O.D Holder
Facing Holder
I.D Holder
U-Drill Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM L400MA L400MC L400LMC
2 2 2
2 2 2
4 4 4
- Opt Opt
Opt Opt Opt
1 1 1
1 1 1
- - -
1 - -
1 1 1
1 1 1
1 1 1
1 1 1
- 1 1
Opt - -
1 1 1
Opt Opt Opt
Tooling Parts Detail
Specifications are subject to change without notice for improvement.
L400MA/MC/LMC
unit : mm(in)Interference
SPECIFICATIONS
12
1011
21
43
8
9 67
5
170 (6.7)40 (1.5)
Ø63(Ø2
.5)
113(4.4)
Ø63
(Ø2.5)
Ø300.2(Ø11.8)
210 (8.3)
Ø570
(Ø22
.4) -
Max
. tur
ning
dia.
660 (25.9)325 (12.8)X-Stroke
285 (11.2)
35 (1.4)
335 (13.2)
125 (4.9)210 (8.3) 40 (1.6)
620 (24.4)
Ø272
.6(Ø
10.7)
Ø260.3 (Ø10.2)
80 (3.1)(MAX:)
80(3.1)
90(3.5
)
110(4.3)
47.5 (1.8)
45(1.7
)
40 (1.5)
Ø741.7 (Ø
29.2)
Ø320(Ø12.6)
Ø558 (Ø22)
Ø577 (Ø
22.7)
615 (24.2)
37 (1.5)60 (2.4)
260 (10.2)
357 (14) 300 (11.8)
260 (10.2) 315 (12.4) 10 (0.4)40 (1.6)
32 (1
.3)
Ø694 (Ø
27.3)
Ø381
(Ø15
)
ø50
(ø1.97)
32(1.3)
Ø714 (Ø28.1)
Ø326
(Ø12.8)
Ø730(Ø28.7)
Ø630
(Ø24
.8) - M
ax. tu
rning
dia.
80(3
.1)
32 (1
.3)
105(4.1)
325 (12.8)X-Stroke
615 (24.2)
95 (3.7)355 (14) 295 (11.6) 325 (12.8)
X-Stroke
260 (10.2) 260 (10.2) 320 (12.6) 5 (0.2)
35 (1.4)
25 (1
)
80 (3.1
)
25 (1) Ø610 (Ø
24)
Ø50(Ø1.97)
ø270
(ø10.6)
Ø714.63(Ø28.1)
Ø582
(Ø22
.9)
Ø640 (Ø25.2) - Max. turning dia.
60(2.4
)
37 (1.5
)
Ø305(Ø12)L400A
L400C/LC
L400MA/MC/LMC
24+
25
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
SPECIFICATIONS
unit : mm(in)Interference
Straight Milling Head
OD Turning Holder
Boring Bar Holder
OD Turning Holder
Boring Bar Holder
OD Turning Holder
Boring Bar Holder Angular Milling Head
50(2) {80.4(3.2)}
2(0.1)
620(
24.4
)62
0(24
.4)
620(
24.4
)62
0(24
.4)
ø304
(12)
[ø38
1(15
)]ø3
04(1
2)[ø
381(
15)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
325(
12.8
)(X-A
XIS
TRAV
EL)
[320
(12.
6)]
320(
12.6
)[2
90(1
1.4)
]31
5(12
.4)
300(
11.8
)
40 (1.5
)99
.3(3
.9)
160.
7(6
.3)
10(0
.4)
[310
(12.
2)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
315(
12.4
)10 (0.4
)30
5(12
)
65 (2.5
)95 (3.7
)
55 (2.1
)
210(
8.3)
[310
(12.
2)]
300(
11.8
)32
0(12
.6)
110
(4.3
)21
0(8
.3)
25 (1)
[295
(11.
6)]
285(
11.2
)33
5 210(
8.3)
90 (3.5
)35 (1.4
)
40 (1.6
)[2
80(1
1)]
[61(2.4) {80.4(3.2)}]92.5(3.6) {62.1(2.4)}[64(2.5) {33.6(1.3)}] 1,205(47.4) (Z-AXIS TRAVEL)
1,205(47.4)2t(0.1) 48(1.9)
113(4.4)
7(0.3) (Z-AXIS TRAVEL)
31.5(1.2)
7(0.3)
5(0.2)
5(0.2)
5(0.2)
5(0.2)
137.5(5.4)
27.7(1.1)
139.3(5.5)1,100(43.3) TAIL STOCK TRAVEL130(5.1) SLEEVE TRAVEL[2,100(82.7)]
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
[150(5.9)][150(5.9)]
232.7(9.2)
51(2)59.7(2.3)
51(2)[70(2.7)]
59.7(2.3)
122(4.8)29.5(1.2)
[149(5.8)]
122(4.8)[149(5.8)]
[219(8.6)][177(7)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
232.7(9.2)[219(8.6)][177(7)]
[161(6.3)][161(6.3)]
139.3(5.5)[161(6.3)][161(6.3)]
139.3(5.5)[161(6.3)][161(6.3)]
110(4.3)
110(4.3)
160(6.3)
[2,200(86.6)]
1,205(47.4) (Z-AXIS TRAVEL)
(Z-AXIS TRAVEL)
[2,200(86.6)]
2(0.1)
2(0.1)
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
110(4.3)
1,205(47.4)[2,200(86.6)]
92(3.6)8(0.3)
[129(5)]
61(2.4)2
(0.1)
14(0.5)
23.7(0.9)
27.7(1.1)
18.7(0.7)
ø304
(12)
[ø38
1(15
)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
232.7(9.2)
51(2)59.7(2.3)122(4.8)
57(2.2)
[149(5.8)][219(8.6)][177(7)]
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
139.3(5.5)[161(6.3)][161(6.3)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
219.7(8.6)
149(5.8)
70(2.7)0.7
[177(7)]1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
139.3(5.5)[161(6.3)]
130(5.1)[150(5.9)][150(5.9)]
219.7(8.6)
149(5.8)70(2.7)
0.754(2.1) [70(2.7)]
[177(7)]1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
2(0.1)
2(0.1)
110(4.3)
100(3.9)
1,205(47.4) (Z-AXIS TRAVEL)[2,200(86.6)]
34(1.3)
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
51(2)0.5 [70(2.7)]
59.7(2.3)122(4.8)[149(5.8)] 130(5.1) SLEEVE TRAVEL
[150(5.9)][150(5.9)]
232.7(9.2)[219(8.6)][177(7)]
139.3(5.5)[161(6.3)][161(6.3)]
ø304
(12)
[ø38
1(15
)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
320(
12.6
)5
(0.2
)30
0(11
.8)
210(
8.2)
90 (3.5
)
[295
(11.
6)]
325(
12.8
)(X-A
XIS
TRAV
EL)
304(
12)
304(
12)
615(
24.2
)61
5(24
.2)
615(
24.2
)61
5(24
.2)
381(
15)
381(
15)
130(5.1) SLEEVE TRAVEL[150(5.9)]
232.7(9.2)[177(7)]
59.7(2.3)9(0.3)
122(4.8)51(2)
139.3(5.5)
107(4.2)
37.7(1.5)
1,100(43.3) TAIL STOCK TRAVEL
[161(6.3)]
130(5.1) SLEEVE TRAVEL[150(5.9)]
232.7(9.2)[177(7)]
59.7(2.3)
7(0.2)
122(4.8)51(2)
139.3(5.5)
37.7(1.5)
108(4.2)
44.7(1.7)
44.7(1.7)
1,100(43.3) TAIL STOCK TRAVEL
[161(6.3)]
35(1
.4) 5(0.2)
5(0.
2)32
0(12
.6)
295(
11.6
)
73.4
(2.9
)18
6.6
97.3
)
100(3.9)
1,205(47.4)
15(0.6)
2t(0.1) 48(1.9)
120(4.7)
(Z-AXIS TRAVEL) 100(3.9)
100(3.9)
(Z-AXIS TRAVEL)1,205(47.4)61(2.4) [2,200(86.6)]
[137(55.4)] 100(3.9)
100(3.9)
325(
12.8
)(X-A
XIS
TRAV
EL)
295(
11.6
)30 (1.1
)32
0(12
.6)
60(2
.3)
260(
10.2
)
5(0.2)
5(0.2)
150(5.9)
295(
11.6
)30 (1.2
)
325(
12.8
)(X-A
XIS
TRAV
EL)
[320
(12.
6)]
60(2
.3)
260(
10.2
)
150(5.9)
2(0.1)
L400A (■: MT#5)
unit : mm(in)Tooling Travel Range
SPECIFICATIONS
Straight Milling Head
OD Turning Holder
Boring Bar Holder
OD Turning Holder
Boring Bar Holder
OD Turning Holder
Boring Bar Holder Angular Milling Head
50(2) {80.4(3.2)}
2(0.1)
620(
24.4
)62
0(24
.4)
620(
24.4
)62
0(24
.4)
ø304
(12)
[ø38
1(15
)]ø3
04(1
2)[ø
381(
15)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
325(
12.8
)(X-A
XIS
TRAV
EL)
[320
(12.
6)]
320(
12.6
)[2
90(1
1.4)
]31
5(12
.4)
300(
11.8
)
40 (1.5
)99
.3(3
.9)
160.
7(6
.3)
10(0
.4)
[310
(12.
2)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
315(
12.4
)10 (0.4
)30
5(12
)
65 (2.5
)95 (3.7
)
55 (2.1
)
210(
8.3)
[310
(12.
2)]
300(
11.8
)32
0(12
.6)
110
(4.3
)21
0(8
.3)
25 (1)
[295
(11.
6)]
285(
11.2
)33
5 210(
8.3)
90 (3.5
)35 (1.4
)
40 (1.6
)[2
80(1
1)]
[61(2.4) {80.4(3.2)}]92.5(3.6) {62.1(2.4)}[64(2.5) {33.6(1.3)}] 1,205(47.4) (Z-AXIS TRAVEL)
1,205(47.4)2t(0.1) 48(1.9)
113(4.4)
7(0.3) (Z-AXIS TRAVEL)
31.5(1.2)
7(0.3)
5(0.2)
5(0.2)
5(0.2)
5(0.2)
137.5(5.4)
27.7(1.1)
139.3(5.5)1,100(43.3) TAIL STOCK TRAVEL130(5.1) SLEEVE TRAVEL[2,100(82.7)]
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
[150(5.9)][150(5.9)]
232.7(9.2)
51(2)59.7(2.3)
51(2)[70(2.7)]
59.7(2.3)
122(4.8)29.5(1.2)
[149(5.8)]
122(4.8)[149(5.8)]
[219(8.6)][177(7)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
232.7(9.2)[219(8.6)][177(7)]
[161(6.3)][161(6.3)]
139.3(5.5)[161(6.3)][161(6.3)]
139.3(5.5)[161(6.3)][161(6.3)]
110(4.3)
110(4.3)
160(6.3)
[2,200(86.6)]
1,205(47.4) (Z-AXIS TRAVEL)
(Z-AXIS TRAVEL)
[2,200(86.6)]
2(0.1)
2(0.1)
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
110(4.3)
1,205(47.4)[2,200(86.6)]
92(3.6)8(0.3)
[129(5)]
61(2.4)2
(0.1)
14(0.5)
23.7(0.9)
27.7(1.1)
18.7(0.7)
ø304
(12)
[ø38
1(15
)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
232.7(9.2)
51(2)59.7(2.3)122(4.8)
57(2.2)
[149(5.8)][219(8.6)][177(7)]
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
139.3(5.5)[161(6.3)][161(6.3)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
219.7(8.6)
149(5.8)
70(2.7)0.7
[177(7)]1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
139.3(5.5)[161(6.3)]
130(5.1)[150(5.9)][150(5.9)]
219.7(8.6)
149(5.8)70(2.7)
0.754(2.1) [70(2.7)]
[177(7)]1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
2(0.1)
2(0.1)
110(4.3)
100(3.9)
1,205(47.4) (Z-AXIS TRAVEL)[2,200(86.6)]
34(1.3)
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
51(2)0.5 [70(2.7)]
59.7(2.3)122(4.8)[149(5.8)] 130(5.1) SLEEVE TRAVEL
[150(5.9)][150(5.9)]
232.7(9.2)[219(8.6)][177(7)]
139.3(5.5)[161(6.3)][161(6.3)]
ø304
(12)
[ø38
1(15
)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
320(
12.6
)5
(0.2
)30
0(11
.8)
210(
8.2)
90 (3.5
)
[295
(11.
6)]
325(
12.8
)(X-A
XIS
TRAV
EL)
304(
12)
304(
12)
615(
24.2
)61
5(24
.2)
615(
24.2
)61
5(24
.2)
381(
15)
381(
15)
130(5.1) SLEEVE TRAVEL[150(5.9)]
232.7(9.2)[177(7)]
59.7(2.3)9(0.3)
122(4.8)51(2)
139.3(5.5)
107(4.2)
37.7(1.5)
1,100(43.3) TAIL STOCK TRAVEL
[161(6.3)]
130(5.1) SLEEVE TRAVEL[150(5.9)]
232.7(9.2)[177(7)]
59.7(2.3)
7(0.2)
122(4.8)51(2)
139.3(5.5)
37.7(1.5)
108(4.2)
44.7(1.7)
44.7(1.7)
1,100(43.3) TAIL STOCK TRAVEL
[161(6.3)]
35(1
.4) 5(0.2)
5(0.
2)32
0(12
.6)
295(
11.6
)
73.4
(2.9
)18
6.6
97.3
)
100(3.9)
1,205(47.4)
15(0.6)
2t(0.1) 48(1.9)
120(4.7)
(Z-AXIS TRAVEL) 100(3.9)
100(3.9)
(Z-AXIS TRAVEL)1,205(47.4)61(2.4) [2,200(86.6)]
[137(55.4)] 100(3.9)
100(3.9)
325(
12.8
)(X-A
XIS
TRAV
EL)
295(
11.6
)30 (1.1
)32
0(12
.6)
60(2
.3)
260(
10.2
)
5(0.2)
5(0.2)
150(5.9)
295(
11.6
)30 (1.2
)
325(
12.8
)(X-A
XIS
TRAV
EL)
[320
(12.
6)]
60(2
.3)
260(
10.2
)
150(5.9)
2(0.1)
L400C (■: MT#5)L400LC
26+
27
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
SPECIFICATIONS
unit : mm(in)Interference
Straight Milling Head
OD Turning Holder
Boring Bar Holder
OD Turning Holder
Boring Bar Holder
OD Turning Holder
Boring Bar Holder Angular Milling Head
50(2) {80.4(3.2)}
2(0.1)
620(
24.4
)62
0(24
.4)
620(
24.4
)62
0(24
.4)
ø304
(12)
[ø38
1(15
)]ø3
04(1
2)[ø
381(
15)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
325(
12.8
)(X-A
XIS
TRAV
EL)
[320
(12.
6)]
320(
12.6
)[2
90(1
1.4)
]31
5(12
.4)
300(
11.8
)
40 (1.5
)99
.3(3
.9)
160.
7(6
.3)
10(0
.4)
[310
(12.
2)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
315(
12.4
)10 (0.4
)30
5(12
)
65 (2.5
)95 (3.7
)
55 (2.1
)
210(
8.3)
[310
(12.
2)]
300(
11.8
)32
0(12
.6)
110
(4.3
)21
0(8
.3)
25 (1)
[295
(11.
6)]
285(
11.2
)33
5 210(
8.3)
90 (3.5
)35 (1.4
)
40 (1.6
)[2
80(1
1)]
[61(2.4) {80.4(3.2)}]92.5(3.6) {62.1(2.4)}[64(2.5) {33.6(1.3)}] 1,205(47.4) (Z-AXIS TRAVEL)
1,205(47.4)2t(0.1) 48(1.9)
113(4.4)
7(0.3) (Z-AXIS TRAVEL)
31.5(1.2)
7(0.3)
5(0.2)
5(0.2)
5(0.2)
5(0.2)
137.5(5.4)
27.7(1.1)
139.3(5.5)1,100(43.3) TAIL STOCK TRAVEL130(5.1) SLEEVE TRAVEL[2,100(82.7)]
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
[150(5.9)][150(5.9)]
232.7(9.2)
51(2)59.7(2.3)
51(2)[70(2.7)]
59.7(2.3)
122(4.8)29.5(1.2)
[149(5.8)]
122(4.8)[149(5.8)]
[219(8.6)][177(7)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
232.7(9.2)[219(8.6)][177(7)]
[161(6.3)][161(6.3)]
139.3(5.5)[161(6.3)][161(6.3)]
139.3(5.5)[161(6.3)][161(6.3)]
110(4.3)
110(4.3)
160(6.3)
[2,200(86.6)]
1,205(47.4) (Z-AXIS TRAVEL)
(Z-AXIS TRAVEL)
[2,200(86.6)]
2(0.1)
2(0.1)
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
110(4.3)
1,205(47.4)[2,200(86.6)]
92(3.6)8(0.3)
[129(5)]
61(2.4)2
(0.1)
14(0.5)
23.7(0.9)
27.7(1.1)
18.7(0.7)
ø304
(12)
[ø38
1(15
)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
232.7(9.2)
51(2)59.7(2.3)122(4.8)
57(2.2)
[149(5.8)][219(8.6)][177(7)]
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
139.3(5.5)[161(6.3)][161(6.3)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
219.7(8.6)
149(5.8)
70(2.7)0.7
[177(7)]1,100(43.3) TAIL STOCK TRAVEL
[2,100(82.7)]
139.3(5.5)[161(6.3)]
130(5.1)[150(5.9)][150(5.9)]
219.7(8.6)
149(5.8)70(2.7)
0.754(2.1) [70(2.7)]
[177(7)]1,100(43.3) TAIL STOCK TRAVEL
[2,100(82.7)]
2(0.1)
2(0.1)
110(4.3)
100(3.9)
1,205(47.4) (Z-AXIS TRAVEL)[2,200(86.6)]
34(1.3)
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
51(2)0.5 [70(2.7)]
59.7(2.3)122(4.8)[149(5.8)] 130(5.1) SLEEVE TRAVEL
[150(5.9)][150(5.9)]
232.7(9.2)[219(8.6)][177(7)]
139.3(5.5)[161(6.3)][161(6.3)]
ø304
(12)
[ø38
1(15
)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
320(
12.6
)5
(0.2
)30
0(11
.8)
210(
8.2)
90 (3.5
)
[295
(11.
6)]
325(
12.8
)(X-A
XIS
TRAV
EL)
304(
12)
304(
12)
615(
24.2
)61
5(24
.2)
615(
24.2
)61
5(24
.2)
381(
15)
381(
15)
130(5.1) SLEEVE TRAVEL[150(5.9)]
232.7(9.2)[177(7)]
59.7(2.3)9(0.3)
122(4.8)51(2)
139.3(5.5)
107(4.2)
37.7(1.5)
1,100(43.3) TAIL STOCK TRAVEL
[161(6.3)]
130(5.1) SLEEVE TRAVEL[150(5.9)]
232.7(9.2)[177(7)]
59.7(2.3)
7(0.2)
122(4.8)51(2)
139.3(5.5)
37.7(1.5)
108(4.2)
44.7(1.7)
44.7(1.7)
1,100(43.3) TAIL STOCK TRAVEL
[161(6.3)]
35(1
.4) 5(0.2)
5(0.
2)32
0(12
.6)
295(
11.6
)
73.4
(2.9
)18
6.6
97.3
)
100(3.9)
1,205(47.4)
15(0.6)
2t(0.1) 48(1.9)
120(4.7)
(Z-AXIS TRAVEL) 100(3.9)
100(3.9)
(Z-AXIS TRAVEL)1,205(47.4)61(2.4) [2,200(86.6)]
[137(55.4)] 100(3.9)
100(3.9)
325(
12.8
)(X-A
XIS
TRAV
EL)
295(
11.6
)30 (1.1
)32
0(12
.6)
60(2
.3)
260(
10.2
)
5(0.2)
5(0.2)
150(5.9)
295(
11.6
)30 (1.2
)
325(
12.8
)(X-A
XIS
TRAV
EL)
[320
(12.
6)]
60(2
.3)
260(
10.2
)
150(5.9)
2(0.1)
L400MA/MC {Big Bore} (■: MT#5)L400LMC {Big Bore}
unit : mm(in)Tooling Travel Range
SPECIFICATIONS
Straight Milling Head
OD Turning Holder
Boring Bar Holder
OD Turning Holder
Boring Bar Holder
OD Turning Holder
Boring Bar Holder Angular Milling Head
50(2) {80.4(3.2)}
2(0.1)
620(
24.4
)62
0(24
.4)
620(
24.4
)62
0(24
.4)
ø304
(12)
[ø38
1(15
)]ø3
04(1
2)[ø
381(
15)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
325(
12.8
)(X-A
XIS
TRAV
EL)
[320
(12.
6)]
320(
12.6
)[2
90(1
1.4)
]31
5(12
.4)
300(
11.8
)
40 (1.5
)99
.3(3
.9)
160.
7(6
.3)
10(0
.4)
[310
(12.
2)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
315(
12.4
)10 (0.4
)30
5(12
)
65 (2.5
)95 (3.7
)
55 (2.1
)
210(
8.3)
[310
(12.
2)]
300(
11.8
)32
0(12
.6)
110
(4.3
)21
0(8
.3)
25 (1)
[295
(11.
6)]
285(
11.2
)33
5 210(
8.3)
90 (3.5
)35 (1.4
)
40 (1.6
)[2
80(1
1)]
[61(2.4) {80.4(3.2)}]92.5(3.6) {62.1(2.4)}[64(2.5) {33.6(1.3)}] 1,205(47.4) (Z-AXIS TRAVEL)
1,205(47.4)2t(0.1) 48(1.9)
113(4.4)
7(0.3) (Z-AXIS TRAVEL)
31.5(1.2)
7(0.3)
5(0.2)
5(0.2)
5(0.2)
5(0.2)
137.5(5.4)
27.7(1.1)
139.3(5.5)1,100(43.3) TAIL STOCK TRAVEL130(5.1) SLEEVE TRAVEL[2,100(82.7)]
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
[150(5.9)][150(5.9)]
232.7(9.2)
51(2)59.7(2.3)
51(2)[70(2.7)]
59.7(2.3)
122(4.8)29.5(1.2)
[149(5.8)]
122(4.8)[149(5.8)]
[219(8.6)][177(7)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
232.7(9.2)[219(8.6)][177(7)]
[161(6.3)][161(6.3)]
139.3(5.5)[161(6.3)][161(6.3)]
139.3(5.5)[161(6.3)][161(6.3)]
110(4.3)
110(4.3)
160(6.3)
[2,200(86.6)]
1,205(47.4) (Z-AXIS TRAVEL)
(Z-AXIS TRAVEL)
[2,200(86.6)]
2(0.1)
2(0.1)
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
50(2) {80.4(3.2)}[61(2.4) {80.4(3.2)}]
124(4.8) {93.6(3.7)}[104(4.1) {84.6(3.3)}]
110(4.3)
1,205(47.4)[2,200(86.6)]
92(3.6)8(0.3)
[129(5)]
61(2.4)2
(0.1)
14(0.5)
23.7(0.9)
27.7(1.1)
18.7(0.7)
ø304
(12)
[ø38
1(15
)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
232.7(9.2)
51(2)59.7(2.3)122(4.8)
57(2.2)
[149(5.8)][219(8.6)][177(7)]
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
139.3(5.5)[161(6.3)][161(6.3)]
130(5.1) SLEEVE TRAVEL[150(5.9)][150(5.9)]
219.7(8.6)
149(5.8)
70(2.7)0.7
[177(7)]1,100(43.3) TAIL STOCK TRAVEL
[2,100(82.7)]
139.3(5.5)[161(6.3)]
130(5.1)[150(5.9)][150(5.9)]
219.7(8.6)
149(5.8)70(2.7)
0.754(2.1) [70(2.7)]
[177(7)]1,100(43.3) TAIL STOCK TRAVEL
[2,100(82.7)]
2(0.1)
2(0.1)
110(4.3)
100(3.9)
1,205(47.4) (Z-AXIS TRAVEL)[2,200(86.6)]
34(1.3)
1,100(43.3) TAIL STOCK TRAVEL[2,100(82.7)]
51(2)0.5 [70(2.7)]
59.7(2.3)122(4.8)[149(5.8)] 130(5.1) SLEEVE TRAVEL
[150(5.9)][150(5.9)]
232.7(9.2)[219(8.6)][177(7)]
139.3(5.5)[161(6.3)][161(6.3)]
ø304
(12)
[ø38
1(15
)]
325(
12.8
)(X
-AX
IS T
RAV
EL)
[320
(12.
6)]
320(
12.6
)5
(0.2
)30
0(11
.8)
210(
8.2)
90 (3.5
)
[295
(11.
6)]
325(
12.8
)(X-A
XIS
TRAV
EL)
304(
12)
304(
12)
615(
24.2
)61
5(24
.2)
615(
24.2
)61
5(24
.2)
381(
15)
381(
15)
130(5.1) SLEEVE TRAVEL[150(5.9)]
232.7(9.2)[177(7)]
59.7(2.3)9(0.3)
122(4.8)51(2)
139.3(5.5)
107(4.2)
37.7(1.5)
1,100(43.3) TAIL STOCK TRAVEL
[161(6.3)]
130(5.1) SLEEVE TRAVEL[150(5.9)]
232.7(9.2)[177(7)]
59.7(2.3)
7(0.2)
122(4.8)51(2)
139.3(5.5)
37.7(1.5)
108(4.2)
44.7(1.7)
44.7(1.7)
1,100(43.3) TAIL STOCK TRAVEL
[161(6.3)]
35(1
.4) 5(0.2)
5(0.
2)32
0(12
.6)
295(
11.6
)
73.4
(2.9
)18
6.6
97.3
)
100(3.9)
1,205(47.4)
15(0.6)
2t(0.1) 48(1.9)
120(4.7)
(Z-AXIS TRAVEL) 100(3.9)
100(3.9)
(Z-AXIS TRAVEL)1,205(47.4)61(2.4) [2,200(86.6)]
[137(55.4)] 100(3.9)
100(3.9)
325(
12.8
)(X-A
XIS
TRAV
EL)
295(
11.6
)30 (1.1
)32
0(12
.6)
60(2
.3)
260(
10.2
)
5(0.2)
5(0.2)
150(5.9)
295(
11.6
)30 (1.2
)
325(
12.8
)(X-A
XIS
TRAV
EL)
[320
(12.
6)]
60(2
.3)
260(
10.2
)
150(5.9)
2(0.1)
L400MA/MC {Big Bore} (■: MT#5)L400LMC {Big Bore}
28+
29
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
SPECIFICATIONS
Prior consultation is required when applying spindle contouring control for gear driven spindle.Specifications are subject to change without notice for improvement.
Specifications [ ] : Option
ITEM L400A L400MA
CAPACITY
Swing Over the Bed mm(in) Ø780(30.7″)
Swing Over the Carriage mm(in) Ø535(21.1″)
Max. Turning Dia. mm(in) Ø640(25.2″) Ø570(22.4″)
Max. Turning Length mm(in) 1,180(46.5″)
Bar Capacity mm(in) Ø90(3.5″)
SPINDLE
Chuck Size inch 12″
Spindle Bore mm(in) Ø104(4.1″)
Spindle Speed (rpm) r/min 3,000 3,000[3,000]
Motor (Max/Cont.) kW(HP) 26/22(35/30) 30/20(40/26.8)[32/27(43/36]
Torque (Max/Cont.) N.m(lbf.ft) 1,325/1,120(977.2/826.1) 797/585(587.8/431.5)[786.2/663.4(579.8/489.2]
Spindle Type - BELT+2STEPGEAR BELT
Spindle Nose - A2-8
C-axis Indexing deg - 0.001°
FEED
Travel (X/Z) mm(in) 325/1,205(12.8″/47.4″)
Rapid Traverse Rate (X/Z) m/min(ipm) 20/25(787.4/984.2)
Slide Type - BOXGUIDE
TURRET
No. of Tool EA 12
Tool SizeOD mm(in) □25(1″)
ID mm(in) Ø50(2″)
Indexing Time sec/step 0.2
LIvETOOL
Motor (Max/Cont.) kW(HP) - 7.5/5.5(10/7.5)
Milling Tool Speed (rpm) r/min - 4,000
Torque (Max/Cont.) N.m(lbf.ft) - 44.7/35(32.9/25.8)
Collet Size mm(in) - Ø26(1″)(ER40)
Type - - BMT75P
TAILSTOCk
Taper - MT#4(Built-in)[MT#5(Built-in)]
Quill Dia. mm(in) Ø100(3.9″)[Ø150(5.9″)]
Quill Travel mm(in) 130(5.1″)[132(5.2″)]
Travel mm(in) 1,100(43.3″)
TANkCAPACITY
Coolant Tank ℓ(gal) 300(79.3)
Lubricating Tank ℓ(gal) 2(0.5)
POWERSUPPLY
Electric Power Supply kVA 29 40
Thickness of Power Cable Sq Over50
Voltage V/Hz 220/60(200/50)
MACHINE
Floor Space (L×W) mm(in) 4,202×2,207(165.4″×86.9″)
Height mm(in) 2,153(84.8″)
Weight kg(lb) 8,500(18,739)
NC Controller - H/WFiSeries[F32i-A] F32i-A[H/WFiSeries][S828D]
SPECIFICATIONS
Prior consultation is required when applying spindle contouring control for gear driven spindle.Specifications are subject to change without notice for improvement.
Specifications [ ] : Option
ITEM L400C L400LC
CAPACITY
Swing Over the Bed mm(in) Ø780(30.7″) Ø725(28.5″)
Swing Over the Carriage mm(in) Ø535(21.1″)
Max. Turning Dia. mm(in) Ø630(24.8″)
Max. Turning Length mm(in) 1,170(46.1″) 2,120(83.5″)
Bar Capacity mm(in) Ø117(4.6″)[BigBore:Ø165.5(6.5″)]
SPINDLE
Chuck Size inch 15″[BigBore:18″/21″]
Spindle Bore mm(in) Ø130(5.1″)[[BigBore:Ø181(7.1″)]
Spindle Speed (rpm) r/min 2,000 [Big Bore : 1,500] [2,000] 2,000[BigBore:1,500]
Motor (Max/Cont.) kW(HP)26/22(35/30)[37/30(50/40)]
[26.4/22 (35.4/29.5)]37/30(50/40)[37/30(50/40)]
Torque (Max/Cont.) N.m(lbf.ft)1,753/1,483(1,293/1,094)[2,705/2,194(106.5/86.4)]
[1,782/1,485 (1,314.3/1,095.2)]3,073/2,490(2,266.5/1,836.5[2,705/2,194(106.5/86.4)]
Spindle Type - BELT+2STEPGEAR
Spindle Nose - A2-11[BigBore:A2-15]
C-axis Indexing deg -
FEED
Travel (X/Z) mm(in) 325/1,205(12.8″/47.4″) 320/2,200(12.6″/86.6″)
Rapid Traverse Rate (X/Z) m/min(ipm) 20/25(787.4/984.2) 20/20(787.4/787.4)
Slide Type - BOXGUIDE
TURRET
No. of Tool EA 10
Tool SizeOD mm(in) □32(1.2″)
ID mm(in) Ø50(2″)
Indexing Time sec/step 0.2
LIvETOOL
Motor (Max/Cont.) kW(HP) -
Milling Tool Speed (rpm) r/min -
Torque (Max/Cont.) N.m(lbf.ft) -
Collet Size mm(in) -
Type - -
TAILSTOCk
Taper - MT#4(Built-in)[MT#5(Built-in)] MT#5(Built-in)
Quill Dia. mm(in) Ø100(3.9″)[Ø150(5.9″)] Ø150(5.9″)
Quill Travel mm(in) 130(5.1″)[132(5.2″)] Ø150(5.9″)
Travel mm(in) 1,100(43.3″) 2,100(82.7″)
TANkCAPACITY
Coolant Tank ℓ(gal) 300(79.3) 400(105.7)
Lubricating Tank ℓ(gal) 2(0.5) 4(1.1)
POWERSUPPLY
Electric Power Supply kVA 33 40
Thickness of Power Cable Sq Over50
Voltage V/Hz 220/60(200/50)
MACHINE
Floor Space (L×W) mm(in) 4,202×2,207(165.4″×86.9″) 5,440×2,244(214.2″×88.3″)
Height mm(in) 2,153(84.8″) 2,139(84.2″)
Weight kg(lb) 8,500(18,739) 11,000(24,250)
NC Controller - H/WFiSeries[F32i-A][S828D] H/WFiSeries[F32i-A]
SPECIFICATIONS
Prior consultation is required when applying spindle contouring control for gear driven spindle.Specifications are subject to change without notice for improvement.
❖L400MC/LMCmodelsrecommendedtouseGearlessTypewhencontouringcontrolisneeded.
Specifications [ ] : Option
ITEM L400MC L400LMC
CAPACITY
Swing Over the Bed mm(in) Ø780(30.7″) Ø725(28.5″)
Swing Over the Carriage mm(in) Ø535(21.1″)
Max. Turning Dia. mm(in) Ø560(22″)
Max. Turning Length mm(in) 1,180(46.5″) 2,100(82.7″)
Bar Capacity mm(in) Ø117(4.6″)[BigBore:Ø165.5(6.5″)]
SPINDLE
Chuck Size inch 15″[BigBore:18″/21″]
Spindle Bore mm(in) Ø130(5.1″)[[BigBore:Ø181(7.1″)]
Spindle Speed (rpm) r/min 2,000[BigBore:1,500][2,000]
Motor (Max/Cont.) kW(HP) 37/30(50/40)[37/30(50/40)][37.2/31(49.8/41.6)]
Torque (Max/Cont.) N.m(lbf.ft) 3,073/2,490(2,266.5/1,836.5)[2,705/2,194(106.5/86.4)][3,090/2,575(2,279/1,899.2)]
Spindle Type - BELT+2STEPGEAR(GEARLESS)
Spindle Nose - A2-11[BigBore:A2-15]
C-axis Indexing deg 0.001°
FEED
Travel (X/Z) mm(in) 320/1,200(12.6″/47.2″) 320/2,200(12.6″/86.6″)
Rapid Traverse Rate (X/Z) m/min(ipm) 20/25(787.4/984.2) 20/20(787.4/787.4)
Slide Type - BOXGUIDE
TURRET
No. of Tool EA 12
Tool SizeOD mm(in) □32(1.2″)
ID mm(in) Ø63(2.5″)
Indexing Time sec/step 0.2
LIvETOOL
Motor (Max/Cont.) kW(HP) 7.5/5.5(10/7.5)
Milling Tool Speed (rpm) r/min 4,000
Torque (Max/Cont.) N.m(lbf.ft) 44.7/35(32.9/25.8)
Collet Size mm(in) Ø26(1″)(ER40)
Type - BMT75P
TAILSTOCk
Taper - MT#5(Built-in)
Quill Dia. mm(in) Ø150(5.9″)
Quill Travel mm(in) 132(5.2″)
Travel mm(in) 1,100(43.3″) 2,100(82.7″)
TANkCAPACITY
Coolant Tank ℓ(gal) 300(79.3) 400(105.7)
Lubricating Tank ℓ(gal) 2(0.5) 4(1.1)
POWERSUPPLY
Electric Power Supply kVA 46
Thickness of Power Cable Sq Over50
Voltage V/Hz 220/60(200/50)
MACHINE
Floor Space (L×W) mm(in) 4,202×2,207(165.4″×86.9″) 5,440×2,244(214.2″×88.3″)
Height mm(in) 2,153(84.8″) 2,139(84.2″)
Weight kg(lb) 8,500(18,739) 11,000(24,250)
NC Controller - F32i-B[H/WFiSeries][S828D]
30+
31
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.
CONTROLLER
SIEMENS 828D (L400MC/LMC)Control function
Max. configuration of Axes
Max. configuration of Axes and SP.
Least Command/inputFeed functionFeedrate OverrideRapid Traverse OverrideAcceleration with jerk limitationProgrammable accelerationFollow-up modeMeasuring system 1 and 2, selectableSeparate path feed for corners and chamfersTravel to fixed stopSpindle functionSpindle OverrideSpindle OrientationSpindle Speed LimitationRigid TappingInterpolation functionLinear interpolation AxisCircle via center point and end pointCircle via interpolation pointHelical interpolationUniversal interpolator NURBS(non-uniform rational B splines)Continuous-path mode with programmablerounding clearanceTool functionTool Radius Comp.Zero Offset (G54, G55, G56, G57 ,G58, G59)Programmable Zero OffsetTool managementDisplayCRT / MDISCREEN SAVERManual OperationManual Handle/Jog FeedRepositionReference ApproachSpindle ControlAuto OperationSingle BlockFeed HoldOptional Block SkipMachine LockDry RunSimulationDiagnosis functionAlarm DisplaySpindle Load/rpm MeterPLC status/LAD displayProgram function
Part Program Storage Length
Program NameSubroutine CallAbsolute/incremental CommandScaling, ROTInch / Metric ConversionConversational Cycle ProgramBlock SearchVariable Program (Macro)Read / Write System VariableBackGround EditingMiscellaneous FunctionsLable SkipProgram Stop/EndLookahead , Jerk LimitationFeed &forward control
3 Axes(MS / SY exception)4 Axes(MS / SY machine only)6 Axes(MS / SY exception)8 Axes(MS / SY machine only)0.0001mm / 0.00001inch
0 - 120%F1, 5, 25/50, 100%
50% - 120%
Max. 4 axes
100 EA
10.4˝ Color LCDNone
Ref 1, 2 ApproachStart, Stop, Rev, Jog, Ort.
(2 dimensional)
3MB (MS / SY exception) PPU26x.x5MB (MS / SY machine only) PPU28x.x23 digit(7 level) G90 - G91
(22 Machine)
M - Code
M00, M01, M02, M30
Program functionISO Dialect Interpreter(G291) (Fanuc Program exe)
Maximum number of tools/cuttings
Number of levels for skip blocks 1Protection FunctionEmergency StopOver TravelContour MonitoringProgram ProtectionAutomation Support Fun.Actual Speed Display(Monitor)Tool Life ManagementWork Count FunctionLanguage Function
Two Language switchable
Data TransferRS 232C I/F / EthernetUSB Memory Stick & CF Card
OptionShop Turn3D SimulationDRF offsetTeach -inNumber of levels for skip blocks 8TRACYL (Cylinder interpolation)TRANSMIT (Pole coordinate command)Sister ToolA,B,C SPLINE INTERPOLATIONRCS HOST (Remote Control)Simultaneous Recording (real time monitoring)Analysis of Internal Drive ValuesNetwork Drive Management
128/256 (MS / SY exception) PPU26x.x256/512 (MS / SY machine only) PPU28x.x
Soft Limit & Hard O.T
(Time, Parts)(Internal)
(6EA)Chinese Traditional, Czech, Danish, Dutch, Finnish, Hungarian, Japanese, Korean, Polish, Russian, Swedish, Portuguese, Turkish
Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.
HYUNDAI WIA FANUC i SeriesControl function / Screen display
Control axis number
Simultaneous control axis number
Min. input unit
Min. increment
High speed HRV controlInch/metric conversionInterlockMachinelockEmergency stopStroke check 1Stroke check 2Stroke check 3Follow upSub offBacklash compensationPosition switchFault load detectionHigh resolution transfer control (HRM)LCD / MDIOperation Auto handling (memory)MDI handlingSearch functionProgram re-startPreventive function for mis-handlingBuffer registrationProgram check functionSingle blockFeed functionManual jog feedManual Handle ScaleFeed commandFeed overrideJog overrideRapid transfer overrideOverride releaseTransfer/minute, transfer/rpmProgram input and interpolation functionNano interpolationDwell functionThreading retractVariable lead threadingReturn of first zero pointReturn check of zero pointReturn of second zero pointProgram stop/overTape codeOptional block skipMax. program enter unitProgram numberAbsolute, incremental programmingDecimal number enteringPlain selectionWork coordinate selectionManual absoluteDrawing dimension direct input programmingG code systemProgrammable data inputSub program callCustom macro BCustom macro variable additionMultiple repetitive cyclesMultiple repetitive cycles ⅡLathe fixed cycle
Max. 4 axesX, Z axesX, Z, C axes (M type machine)X, Z, Y, C axes (Y type machine)X, Z, B, C axes (MS type machine)2 axes/straight, arc interpolation(Max. 4 axes)X, Z, Y, B axis : 0.001mm (0.0001″)C axis : 0.001 deg.X, Z, Y, B axis : 0.001mm (0.0001″)C axis : 0.001 deg.
G20 / G21Each axis / All axisFull axis
Over-travel
+/- 0~9999 Pulse (Rapid traverse & cutting feed)
Back spin torque limiter (BST)
8.4″ Color LCD
Sequence, Program
Dry run, Program check
Rapid transfer, Jog, Handlex1, x10, x100Direct command for F code feed0~200% (10% units)0~2,000 mm/min [79 ipm]F1, F5, F25 / F50, F100%
Positioning/Straight/Arc (G00/G01/G02/G03)G04, 0~9999.9999 sec
G28, manualG27G30M00, M01 / M02, M30EIA / ISO 1 EA+/- 9999.9999″O+4 digit number
G17, G18, G19G52 to G59“ON” fixedIncluded chamfering / Corner R`AG1010 Steps
#100 to #199, #500 to #999
Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset quantityTool offsetTool nose radius compensationConfiguration/wear compensationDirect input of measuring tool compensation BTool life managementData input, output and editing functionInput/output interfaceMemory card input and outputProgram storing capacityProgram registration quantityMemory lockBackground editAdditional expandable editScreen, diagnosis and setting functionSelf diagnosis functionHistoric screenHelp functionOutside messageOperation time/counter displayActual sp. speed, T code displayActual machining feed rate displayHandling monitor screenGraphic screenSpindle/servo setting screenLanguagesLCD screen saveAuto data backupFunction according with machine specificationCs contouring functionStored pitch error compensationPole coordinate commandCylinder interpolationDrill fixed cycleSp. positioning expandableMain sp. synchronization controlTorque controlY axis offsetAngular axis control
OptionHigh speed EthernetOptional block skip3rd & 4th reference point returnG code systemPolygon turningHelical interpolationDynamic graphic display8 level data protection functionManual guide i
M4 digit number
S + 4 digit number, binary number outputG96, G9750% ~ 150% (10% unit)
T2 + 264 pairs
G40, G41, G42
RS232C
1280m/512kbMax. 500 programs
NC program copy, move, change
Alarm and handling screen
Rod meter light
Selection of random 5 EAScreen saver
Turn millTurn millTurn millTurn millTurn millTurn mill, Sub spindleSub spindleSub spindleY type machineY type machine
100 Mbps (Option board is required)9 EA
B / C
Interactive program (10.4″Color LCD)
32+
33
L4
00 S
ERIE
SC
NC
Tu
rN
iNg
CeN
Ter
HYu
ND
Ai W
iAM
ACH
iNe
TOO
L
CONTROLLER
Figures in inch are converted from metric values.Specifications are subject to change without notice for improvement.
CONTROLLER
FANUC 32i-A (L400A/MA/C/LC)Axis control / Display unit
Controlled axes
Simultaneous controllable axesLeast input increment
Least command increment
High speed HRV controlInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Stored stroke check 2Stored stroke check 3Follow-upServo-off
Backlash compensation
Position switchUnexpected disturbance torque detectionHigh resolution transfer control (HRM)LCD / MDIOperationAutomatic operation (memory)MDI operationSearch functionProgram restartWrong operation preventionBuffer registerProgram check functionSingle blockFeed functionsManual jog feedManual handle feedrateFeed commandFeedrate overrideJog overrideRapid traverse overrideOverride cancelFeed per minute / rotationProgram input & interpolation functions
Nano interpolation
DwellThread retractVariable lead threading1st reference point returnReference point return check2nd reference point returnProgram stop / EndTape codeOptional block skipMaximum programmable dimensionsProgram numberAbsolute and incremental programmingDecimal point inputPlane selectionWork coordinate system selectionManual absoluteDirect drawing dimension programmingG code systemProgrammable data inputSub program callCustom macro BAddition of custom macro common variable
Max. 4 axes are availableX, Z axesX, Z, C axes (M type machine)X, Z, Y, C axes (Y type machine)X, Z, B, C axes (MS type machine)2axes / Linear and circular (Max. 4axes)X, Z, Y, B axes : 0.001 mm (0.0001”)C axis : 0.001 degX, Z, Y, B axes : 0.001 mm (0.0001”)C axis : 0.001 deg
G20 / G21Each axis / All axesAll axes
Over-travel
+/- 0~9999 pulses (Rapid traverse & cutting feed)
Back-spin torque limiter (BST)
10.4″ Color LCD
Sequence, program
Dry run., program check
Rapid, jog, handlex1, x10, x100F code feedrate direct command0~200 % (10% units)0~2,000 mm/min[79 ipm]F1, F5, F25/F50, F100%
Positioning / Linear / Circular (G00 / G01 / G02, G03)G04, 0~9999.9999 sec
G28, manualG27G30M00, M01 / M02, M30EIA / ISO1 ea+/- 9999.9999″O+4 digits
G17, G18, G19G52 to G59“ON” FixedIncluded chamfering / Corner R`AG1010 folds nested
#100 to #199, #500 to #999
Program input & interpolation functionsMultiple repetitive cyclesMultiple repetitive cycles ⅡCanned cycles for turningManual guide iSub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset pairsTool offsetTool nose radius compensationDirect input of measured toolcompensation value BTool life managementData in/output & editing functionsReader / Puncher interfaceMemory card input/outputPart program storage lengthNumber of registrable programs expansionMemory lockBackground editingExtended part program editionDisplay, diagnosis & setting functionsSelf-diagnosis functionHistory displayHelp functionExternal messageRun hour / Parts count displayDisplay of actual spindle speed and T codeActual cutting feedrate displayOperating monitor screenGraphic displaySpindle / Servo setting screenSelection of 5 optional languageErase CRT screen displayAutomatic data backupFunctions according to machine specificationCs contouring controlStored pitch error compensationPolar coordinate interpolationCylindrical interpolationCanned cycles for drillingspindle orientation expansionSpindle synchronous controlTorque controlY axis offsetAngular axi