Plumbing
Lab Specifications
An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India
and National Skill Development Corporation
03
Shri Narendra ModiHonourable Prime Minister
If we have to promote the
development of our country
then our mission has to be
‘skill development’ and
‘skilled India’.
LAB SPECIFICATIONS PLUMBING
04LAB SPECIFICATIONS PLUMBING
OVERVIEW
The lab standardization guidelines envisions to standardize the lab infrastructure for plumbing trades across
sectors. The document intends to ensure industry linked training with state-of-art infrastructure.
1. Description of Lab
2. List of Tools & Equipment - Plumbing
3. 3D Representation of Plumbing Lab
4. Illustrative Architectural Layout of Lab
5. Illustrative Pricing of Tools & Equipment
6. Safety Instructions
SECTORPLUMBING
05LAB SPECIFICATIONS PLUMBING
06
A General Plumber
B Plumber After Sales
C Helper Plumber
D Assistant Plumber
30
1:6
DESCRIPTION OF LAB1
Proposed Batch Size
Machine - ManRatio
LAB SPECIFICATIONS PLUMBING
Lab Specifications for the Listed Sectors / Job Roles
LIST OF TOOLS & EQUIPMENT - PLUMBING2
07
S. No. Equipment Name Qty Unit Type
1 Wooden Workstation Table 5 Nos
2 Pipe Die Set - 1/2 Inch to 1 Inch 3 Nos
3 Pipe Die Set - 1/4 Inch to 2 Inch 3 Nos
4 Pipe Wrench 6 Nos
5 Pipe Wrench Size - 12 inch 6 Nos
6 Pipe Vice Size no. 2 4 Nos
7 Pipe Vice Size no. 3 4 Nos
8 Hammer Sledge - 2 Pound 6 Nos
9 Hammer Sledge - 1 Pound 6 Nos
10 Flat Chisel - 1 inch 6 Nos
11 Point Chisel - 1 inch 6 Nos
12 Flat Punch - 1/2 inch 6 Nos
13 Point Punch - 1/2 inch 6 Nos
14 Rawel Jumper Bit Set - 6mm 6 Nos
15 Rawel Jumper Bit Set - 8mm 6 Nos
16 Pipe Wheel Cutter - Upto 2 inches 6 Nos
17 Spanner Set (Double End) 3 Set
18 Spirit Level - 2 Feet 6 Nos
19 Tube Level - 30 M 1 Nos
20 Screw Spanner - Size no . 12 6 Nos
21 Screw Driver - 1-1/2 Feet 6 Set
22 Screw Driver - 1 Feet 6 Set
23 Grip Plier 6 Nos
24 Poker 6 Nos
25 Cutting Plier 6 Nos
LAB SPECIFICATIONS PLUMBING
LIST OF TOOLS & EQUIPMENT - PLUMBING2
08
S. No. Equipment Name Qty Unit Type
26 Hacksaw Frame with Blade 12 Nos
27 Tri Square - Small 6 Nos
28 Plumb Bob - Small 6 Nos
29 Caulking Chisel 1-1/4 Inch 6 Nos
30 Blow Lamp 6 Nos
31 Trowel Mason - Small 6 Nos
32 Trowel Mason - Big 6 Nos
33 Spade with Handle 6 Nos
34 Mortar Pan 6 Nos
35 Hand Drilling Machine 5 Nos
36 Cleaning Brush - 2 inch 6 Nos
37 Painting Brush - 2 inch 6 Nos
38 Oil Can Small 5 Nos
39 Chain Wrench Upto 3 inches 5 Nos
40 Hand Bending Machine 3 Nos
41 Ladder - 10 Feet MS 2 Nos
42 Measuring Type (5M) 6 Nos
43 Hydraulic Pressure Test Pump 1 Nos
44 Safety Belt 6 Nos
45 Safety Shoes 6 Nos
46 Helmet 30 Nos
47 Cotton Hand Gloves 30 Nos
48 White Wash Basin 6 Nos
49 White Lwc Cistern 6 Nos
50 White Ewc (Normal) 6 Nos
LAB SPECIFICATIONS PLUMBING
LIST OF TOOLS & EQUIPMENT - PLUMBING2
09
S. No. Equipment Name Qty Unit Type
51 White Kitchen Sink (Steel) 6 Nos
52 White Urinal (Flat) 6 Nos
53 White Urinal (Magnon) 6 Nos
54 White P Trap 6 Nos
55 White S Trap 6 Nos
56 Bibcock (Long) - 1/2 inch 10 Nos
57 Bibcock (Short) - 1/2 inch 10 Nos
58 Pillar Cock - 1/2 inch 10 Nos
59 Angle Cock - 1/2 inch 10 Nos
60 Ball Valve - 1/2 inch 10 Nos
61 Gate Valve - 1 inch 10 Nos
62 Globe Valve - 1 inch 10 Nos
63 Check Valve - 1 inch 10 Nos
64 Non-Return Valve - 1 inch 10 Nos
65 Foot Valve - 1 inch 10 Nos
66 Foot Valve - 2 inch 10 Nos
LAB SPECIFICATIONS PLUMBING
3D REPRESENTATION OF PLUMBING LAB3
10
Details of 3D Lab
Plumbing Bays with Display Area
all Necessary Implants Entry
Storage for Hand Tools Theory Rooms
and Consumables Exit
Work Benches
LAB SPECIFICATIONS PLUMBING
ILLUSTRATIVE PRICING OF TOOLS & EQUIPMENT5
12
1 Wooden Workstation Table 5 Nos Fabricated 8,000 40,000
2 Pipe Die Set - 1/2 Inch to 1 Inch 3 Nos Multi Branded 1,000 3,000
3 Pipe Die Set - 1/4 Inch to 2 Inch 3 Nos Multi Branded 1,200 3,600
4 Pipe Wrench 6 Nos Non Branded 550 3,300
5 Pipe Wrench Size - 12 inch 6 Nos Multi Branded 700 4,200
6 Pipe Vice Size no. 2 4 Nos Multi Branded 2,200 8,800
7 Pipe Vice Size no. 3 4 Nos Multi Branded 2,200 8,800
8 Hammer Sledge - 2 Pound 6 Nos Non Branded 700 4,200
9 Hammer Sledge - 1 Pound 6 Nos Non Branded 700 4,200
10 Flat Chisel - 1 inch 6 Nos Non Branded 125 750
11 Point Chisel - 1 inch 6 Nos Non Branded 250 1,500
12 Flat Punch - 1/2 inch 6 Nos Non Branded 250 1,500
13 Point Punch - 1/2 inch 6 Nos Non Branded 300 1,800
14 Rawel Jumper Bit Set - 6mm 6 Nos Multi Branded 650 3,900
15 Rawel Jumper Bit Set - 8mm 6 Nos Multi Branded 800 4,800
16 Pipe Wheel Cutter - Upto 2 inches 6 Nos Multi Branded 5,000 30,000
17 Spanner Set (Double End) 3 Set Thapar or Equivalent 2,000 6,000
*Brands are illustrative, other brands with same specifications may be used
**Price is indicative for the major brands, similar tools/equipment may be used
S. No. Equipment Name Qty Unit Brands* Unit Price** Amount Type (INR) (INR)
LAB SPECIFICATIONS PLUMBING
ILLUSTRATIVE PRICING OF TOOLS & EQUIPMENT5
13
18 Spirit Level - 2 Feet 6 Nos Thapar or Equivalent 1,000 6,000
19 Tube Level - 30 M 1 Nos Non Branded 1,000 1,000
20 Screw Spanner - Size no . 12 6 Nos Thapar or Equivalent 675 4,050
21 Screw Driver - 1-1/2 Feet 6 Set Thapar or Equivalent 500 3,000
22 Screw Driver - 1 Feet 6 Set Thapar or Equivalent 500 3,000
23 Grip Plier 6 Nos Thapar or Equivalent 450 2,700
24 Poker 6 Nos Non Branded 225 1,350
25 Cutting Plier 6 Nos Thapar or Equivalent 350 2,100
26 Hacksaw Frame with Blade 12 Nos Non Branded 300 3,600
27 Tri Square - Small 6 Nos Non Branded 300 1,800
28 Plumb Bob - Small 6 Nos Non Branded 400 2,400
29 Caulking Chisel 1-1/4 Inch 6 Nos Thapar or Equivalent 100 600
30 Blow Lamp 6 Nos Non Branded 1,500 9,000
31 Trowel Mason - Small 6 Nos Non Branded 300 1,800
32 Trowel Mason - Big 6 Nos Non Branded 420 2,520
33 Spade With Handle 6 Nos Non Branded 300 1,800
34 Mortar Pan 6 Nos Non Branded 350 2,100
LAB SPECIFICATIONS PLUMBING
S. No. Equipment Name Qty Unit Brands* Unit Price** Amount Type (INR) (INR)
*Brands are illustrative, other brands with same specifications may be used
**Price is indicative for the major brands, similar tools/equipment may be used
ILLUSTRATIVE PRICING OF TOOLS & EQUIPMENT5
14
35 Hand Drilling Machine 5 Nos Multi Branded 5,000 25,000
36 Cleaning Brush - 2 inch 6 Nos Non Branded 300 1,800
37 Painting Brush - 2 inch 6 Nos Non Branded 300 1,800
38 Oil Can Small 5 Nos Non Branded 150 750
39 Chain Wrench upto 3 inches 5 Nos Non Branded 1,300 6,500
40 Hand Bending Machine 3 Nos Non Branded 3,000 9,000
41 Ladder - 10 Feet MS 2 Nos Non Branded 3,500 7,000
42 Measuring Type (5M) 6 Nos Non Branded 150 900
43 Hydraulic Pressure Test Pump 1 Nos Multi Branded 6,700 6,700
44 Safety Belt 6 Nos Multi Branded 300 1,800
45 Safety Shoes 6 Nos Multi Branded 300 1,800
46 Helmet 30 Nos Multi Branded 150 4,500
47 Cotton Hand Gloves 30 Nos Multi Branded 100 3,000
48 White Wash Basin 6 Nos Cera or Equivalent 1,400 8,400
49 White Iwc Cistern 6 Nos Cera or Equivalent 5,000 30,000
50 White Ewc (Normal) 6 Nos Cera or Equivalent 1,000 6,000
51 White Kitchen Sink (Steel) 6 Nos Cera or Equivalent 2,000 12,000
LAB SPECIFICATIONS PLUMBING
S. No. Equipment Name Qty Unit Brands* Unit Price** Amount Type (INR) (INR)
*Brands are illustrative, other brands with same specifications may be used
**Price is indicative for the major brands, similar tools/equipment may be used
ILLUSTRATIVE PRICING OF TOOLS & EQUIPMENT5
15LAB SPECIFICATIONS PLUMBING
S. No. Equipment Name Qty Unit Brands* Unit Price** Amount Type (INR) (INR)
*Brands are illustrative, other brands with same specifications may be used
**Price is indicative for the major brands, similar tools/equipment may be used
52 White Urinal (Flat) 6 Nos Cera or Equivalent 1,200 7,200
53 White Urinal (Magnon) 6 Nos Cera or Equivalent 1,800 10,800
54 White P Trap 6 Nos Cera or Equivalent 2,500 15,000
55 White S Trap 6 Nos Cera or Equivalent 2,000 12,000
56 Bibcock (Long) - 1/2 inch 10 Nos Multi Branded 800 8,000
57 Bibcock (Short) - 1/2 inch 10 Nos Multi Branded 500 5,000
58 Pillar Cock - 1/2 inch 10 Nos Multi Branded 625 6,250
59 Angle Cock - 1/2 inch 10 Nos Multi Branded 1,500 15,000
60 Ball Valve - 1/2 inch 10 Nos Multi Branded 300 3,000
61 Gate Valve - 1 inch 10 Nos Multi Branded 520 5,200
62 Globe Valve - 1 inch 10 Nos Multi Branded 1,000 10,000
63 Check Valve - 1 inch 10 Nos Multi Branded 850 8,500
64 Non Return Valve - 1 inch 10 Nos Multi Branded 1,100 11,000
65 Foot Valve - 1 inch 10 Nos Multi Branded 680 6,800
66 Foot Valve - 2 inch 10 Nos Multi Branded 850 8,500
Total 4,38,370
SAFETY INSTRUCTIONS6
16
Given below Safety Instruction posters should be placed at appropriate places in the lab. The posters should
be digitally printed and pasted on sun board.
HIGH VISIBILITY JACKET
LAB SPECIFICATIONS PLUMBING
17
SAFETY INSTRUCTIONS6
• Hand tools should be carried in a toolbox or with the help of a tool-belt
• The work area should be fenced off to prevent unauthorized entry, if necessary
• Before working, workpieces should be checked for metal parts that may cause
damage to hand tools
• Precautions should be taken to prevent tools slipping out from hands while
working at height
• Hand tools should be operated in correct posture and strength
• Proper steps and procedures should be followed while operating a hand tool
• The direction of movement of hand tools with sharp corners/edges should be
away from the body
• Suitable personal protective equipment such as helmets, aprons or gloves
should be used when necessary
• To avoid flying fragments/particles or noise while operating hand tools, personal
protective equipment must be worn
The operator must use clamps to secure a workpiece that is liable to move into a •
stable position.
LAB SPECIFICATIONS PLUMBING
18
Shri Rajiv Pratap RudyMinister of State (I/C) for
Skill Development & Entrepreneurship
Govt. of India
We are a youthful nation.
Our youth is our
strength. The world and
India need a skilled
workforce and we are
committed to achieve this
mission.
LAB SPECIFICATIONS PLUMBING