Labor Norms 2

7/24/2019 Labor Norms 2

1/12

Page 73

Division 4

MasonryEstimating Tips

041 Mortar & Masonry Accessories All masonry walls, whether interior or exterior,require bracing. The cost of bracing walls

interchangeably, and incorrectly. Mortar is used during construction should be included by the

to bed masonry units, seal the entry of air and estimator and this bracing must remain in place

moisture, proide architectural appearance, and until permanent bracing is complete. !stimator

allow for si"e ariations in the units. #rout is shall also pay attention to all anchoring

used primarily in reinforced masonry construction accessories of walls to the structural frames.

and is used to bond the masonry to the $ric% bonds, patterns, running bonds type are

reinforcing steel. !stimator should be aware of ma&or factors affecting productiity and cost.their unique uses and costs. 'or &obs that require large amount of cutting

bric%s, consider a portable masonry saw.

042 Unit Masonry (ontractor shall pay attention to the costs ofMasonry pricing requires full %nowledge of the cleaning face bric%s, this cost aries with

arious factors and parameters affecting costs, the %ind of bric%s used. (ontractor shall focus

such as building shape, type of building, %ind of on other miscellaneous masonry costs such as

mortar, wall thic%ness, &oints style and quality extra labor and hoisting for materials used in

of wor%manship. high)rise buildings. (ontractors shall focus on

pricing extra materials, labor inoled to meet

The most common types of unit masonry are seismic requirements for concrete masonry

bric% and concrete masonry. The ma&or walls.

classifications of bric% are building bric% and

gla"ed bric%, fire bric% and paers. $ric% and

concrete bloc% are priced by the piece and then

conerted into price per square meter of wall.

The terms mortarand groutare often used


2/12Page 7*

ITEM DESCRIPTIO UIT

041 MORTAR & MASOR! ACCESSORIES041 100 MORTAR

041 01" #ROUTI#$

+* +-)+++ #routing bond beams / 0intels, pumped,not incl.bloc% ++ mm thic%, ++ mm deep. (1M 2.+++ *.+++ .+++

+* +-)+++ #routing bond beams / 0intels, pumped,not incl.bloc% mm thic%, ++ mm deep. ,, 2.++ 3.4+ +.47-

+* +-)++-+ #routing bond beams / 0intels,pumped,not incl.bloc% 3++ mm thic%, ++ mm deep. 56M 2.2 3.-3+ +.4+2

+* +-)+++ #routing concrete bloc% cores,solid,++ mm thic%,by hand 2.+++ +.224 +.+++

+* +-)++ #routing concrete bloc% cores,solid, + mm thic%,pumped, .+++ +.2- +.*

+* +-)++ #routing concrete bloc% cores, ++ mm thic%,pumped 2.+++ +.34+ +.43

+* +-)+3+ #routing concrete bloc% cores, 3+ mm thic%,pumped *2.+++ +.--7 +.++

+* +-)+++ #routing caity walls, + mm space,pumped -*.+++ +.4 +.*-

+* +-)++ #routing caity walls, 7 mm space,pumped +4.+++ +.4* +.+

+* +-)+-++ #routing caity walls,+ mm space 2.+++ +.34+ +.43

+* +-)+7++ #routing caity walls,+ mm space .+++ +.2 +.*3-

+* +-)+2++ #routing door frames, 4 mm x 3 mm opening P!898# 4.+++ +.* +.*+7

+* +-)+2+ #routing door frames,.2 m x . m opening : *.+++ +.72+ +.2

041 024 MORTAR$

+* +*)+++ Mortar with masonry cement, mix type M, ;;- mix, field mix. (1M *.2++ .+2 .--7

+* +*)+++ Mortar with masonry cement, mix type 8, ;3 mix, field mix. *.2++ .+2 .--7

+* +*)++ Mortar with portland cement and lime, mix type M, ;einforcing steel bars, placed hori". - mm, / + mm bars **+.+++ +.+3- +.+++

+* )+++ @oint >einforcing steel bars, Placed ertical, +mm bars +.+++ +.+73 +.+++

+* )++-+ @oint >einforcing steel bars, Placed ertical,- mm, / + mm bars 3+.+++ +.+*- +.+++

+* )+++ @oint >einforcing ire strips, regular truss, to + mm wide, galani"ed 0M ++.+++ +.+ +.+++

+* )++ @oint >einforcing ire strips, regular truss, to 3++ mm wide, galani"ed 7+.+++ +.+ +.+++

+* )+*++ @oint >einforcing, (aity truss with drip section to + mm wide ++.+++ +.+ +.+++

+* )+*+ @oint >einforcing, (aity truss with drip section to 3++ mm wide 7+.+++ +.+ +.+++

041 (1+ -A** P*U#S$

+* 2)+++ all Plugs, for nailing to bric%wor%, - ga., galani"ed,plain,or wood fill ++ P(5. $ric%layer 2.+++ .+++ +.+++

041 (20 -A** TIES$

DI.ISIO 04 $ MASOR!

CSICODE

CRE-STRUCTURE

DAI*!OUTPUT

MA)OURS

E/UIP)OURS

$ric%layer $ric%layer Belpers !quip.per.ClightD #rout Pump complete weinforced, alternate courses, bar spacing . meter, ++mm x *++ mm, + mm thic%

(oncrete $loc%, $ac%)up, >einforced, alternate courses, bar spacing . meter, ++

mm x *++ mm, ++ mm thic%(oncrete $loc%, $ac%)up, >einforced, alternate courses, ++ mm x *++ mm, + mmthic%

(oncrete $loc%, $ac%)up, >einforced, alternate courses, ++ mm x *++ mm, 3++ mmthic%

(oncrete $loc%, $ac%)up, >einforced, alternate courses, ++ mm x *++ mm,++ mm thic% ,!xposed with side tooled &oints.

(oncrete $loc%, $ac%)up, >einforced, alternate courses, ++ mm x *++ mm, + mmthic% ,!xposed with side tooled &oints.

(oncrete $loc%, $ac%)up, >einforced, alternate courses, ++ mm x *++ mm, ++ mmthic% ,!xposed with side tooled &oints.


5/12

Page 77

ITEM DESCRIPTIO UIT

DI.ISIO 04 $ MASOR!

CSICODE

CRE-STRUCTURE

DAI*!OUTPUT

MA)OURS

E/UIP)OURS

+* -)3++ 56M +.+ .7 +.7*

042 220 COCRETE '*OC;6DECORATI.E$

+* +)+++ 56M *.27+ .* +.3+

+* +)++ 37.7+ .374 +.3*

+* +)+++ 3.43 .**7 +.3-

+* +)*+ 3*.++ .4 +.32

+* +)++ .43+ .++ +.+

+* +)++ 3*.++ .4 +.32

+* +)+ 4.*++ .7-4 +.**

+* +)++ .43+ .++ +.+

+* +)-++ 3*.++ .4 +.32

+* +)-+ 4.*++ .7-4 +.**

+* +)-++ .43+ .++ +.+

042 224 COCRETE '*OC;6 ITER*OC;I#$

+* *)+*++ 56M 7.3+ .224 +.*

+* *)+*+ : 66 4.3++ .-4* +.777

042 2%2

+* 3)+++ Acoustical slotted concrete bloc%,noise reduction coefficient,+. or +.-,++ mm thic% 56M -.-4+ .4*2 +.*27

+* 3)++ Acoustical slotted concrete bloc%,noise reduction coefficient,+.+ or +.-, + mm thic%3.-3+

.+ +.+

+* 3)+*++ Acoustical slotted concrete bloc%,noise reduction coefficient, +.* or +.,++ mm thic%4.4*+

.-+2 +.-

+* 3)+++ Acoustical slotted concrete bloc%,noise reduction coefficient, +.-+ or +.-,++ mm thic%4.4*+

.-+2 +.-

+* 3)4++ *4.*7+ .+ +.-3

+* 3)4+ **.*7+ .-4 +.4

+* 3)3+++ 37.+ .34- +.3*4

+* 3)3++ 33.*+ . +.324

+* 3)*++ *+.++ .42 +.3

+* 3)*+ 3.*-+ .*-- +.3-7

(oncrete $loc%, $ac%)up, >einforced, alternate courses, ++ mm x *++ mm,3++ mm thic% ,!xposed with side tooled &oints.

+.+ 'oreman*.+++ $ric%layers.+++ $ric%layer Belpers+.+ !quip. perator+.+ Mixer +.2 m3+.++ Power Tools+.+ (rane+.+ 'or% 0ift+. Truc%+.++ Bodcarrier

(oncrete $loc%, embossed simulated bric% face, 'ace tooled &oint,not reinforced, ++ mm x *++ mm units, ++ mm thic%

+.+ 'oreman*.+++ $ric%layers.+++ $ric%layer Belpers+.+ !quip. perator+. Mixer +.2 m3+.++ Power Tools+.+ (rane+. 'or% 0ift+. Truc%+.++ Bodcarrier

(oncrete $loc%, embossed simulated bric% face, 'ace tooled &oint,not reinforced, ++ mm x *++ mm units, + mm thic%

(oncrete $loc%, embossed simulated bric% face, 'ace tooled &oint,not reinforced, ++ mm x *++ mm units, ++ mm thic%

(oncrete $loc%, Fecoratie, Feep grooed, smooth face, ++ mm x *++mm x ++ mmthic%

(oncrete $loc%, Fecoratie, Feep grooed, smooth face, ++ mm x *++ mm x ++ mmthic%

(oncrete bloc%, decoratie, split rib profile units, mm deep ribs, 2 ribs,++ mm x *++

mm x ++ mm thic%(oncrete bloc%, decoratie, split rib profile units, mm deep ribs, 2 ribs,++ mm x *++mm x + mm thic%

(oncrete bloc%, decoratie, split rib profile units, mm deep ribs, 2 ribs,++ mm x *++mm x ++ mm thic%

(oncrete bloc%, decoratie, split face or scored split face, ++ mm x *++ mm x ++ mmthic%

(oncrete bloc%, decoratie, split face or scored split face, ++ mm x *++ mm x + mmthic%

(oncrete bloc%, decoratie, split face or scored split face, ++ mm x *++ mm x ++ mmthic%

(oncrete bloc% interloc%ing, ++ mm x *++ mm units, ++ mm thic%, including groutand reinforcing

+.+ 'oreman

*.+++ $ric%layers.+++ $ric%layer Belpers+.+ !quip. perator+.+ Mixer +.2 m3+.++ Power Tools+.+ (rane+.+ 'or% 0ift+. Truc%+.++ Bodcarrier

(oncrete bloc% interloc%ing, ++ mm x *++ mm units, 3++ mm thic%, including groutand reinforcing

COCRETE '*OC;6 PARTITIOS$ Including Scaffolding

+.+ 'oreman*.+++ $ric%layers.+++ $ric%layer Belpers+.+ !quip. perator

+.+ Mixer +.2 m3+.++ Power Tools+. (rane+. 'or% 0ift+. Truc%+.++ Bodcarrier

0ightweight concrete bloc%, tooled &oints, solid, not reinforced, ++ mm x *++ mm x ++mm thic%

0ightweight bloc%, tooled &oints, side solid, not reinforced, ++ mm x *++ mm x +

mm thic%0ightweight concrete bloc%, tooled &oints, solid, not reinforced, ++ mm x *++ mm x ++mm thic%

0ightweight concrete bloc%, tooled &oints, solid, not reinforced, ++ mm x *++ mm x +mm thic%

>egular concrete bloc%, tooled &oints, sides, hollow not reinforced, ++ mm x *++mm x ++ mm thic%

>egular concrete bloc%, tooled &oints, sides, hollow not reinforced, ++ mm x *++ mmx + mm thic%


6/12

Page 72

ITEM DESCRIPTIO UIT

DI.ISIO 04 $ MASOR!

CSICODE

CRE-STRUCTURE

DAI*!OUTPUT

MA)OURS

E/UIP)OURS

+* 3)*++ 56M 4.43+ .737 +.*3*

+* 3)*+ -.7+ .4** +.*2-

+* 3)*3++ .47+ .-* +.--

+* 3)*++ **.3+ .73 +.43

+* 3)*+ 34.*+ .3 +.33

+* 3)*-++ 33.+ .7+ +.343

+* 3)*-+ 4.-++ .77 +.*34

+* 3)++ >egular concrete bloc%, solid, not reinforced, ++ mm x *++ mm x ++ mm thic% *.++ .3 +.3+4

+* 3)++ >egular concrete bloc%, solid, not reinforced, ++ mm x *++ mm x + mm thic% 37.2+ .34 +.3*4

+* 3)+ >egular concrete bloc%, solid, not reinforced, ++ mm x *++ mm x ++ mm thic% 3.*7+ .- +.*3

+* 3)++ >egular concrete bloc%, solid, not reinforced, ++ mm x *++ mm x 3++ mm thic% *.+ .3 +.32

+* 3)++ >egular concrete bloc%, solid, reinforced, ++ mm x *++ mm x ++ mm thic% 3-.+ .*3- +.34

+* 3)+ >egular concrete bloc%, solid, reinforced, ++ mm x *++ mm x + mm thic% 3.+-+ .- +.*+

+* 3)-++ >egular concrete bloc%, solid, reinforced, ++ mm x *++ mm x ++ mm thic% 7.+7+ .4 +.*2+

042 240

+* *+)+++ (oncrete 5creen $loc%, ++ mm x *++ mm, ++ mm thic% 56M 3.2+ .--2 +.*7

+* *+)+3++ (oncrete 5creen $loc%, ++ mm x *++ mm, ++ mm thic% *.-* . +.2

+* *+)+++ (oncrete 5creen $loc%, 4+ mm x 4+ mm, 4+ mm thic% +.+-* .4 +.-*2

042 24+ #*A>ED COCRETE '*OC; $

+* *2)+++ 56M 3-.-+ .* +.3-

+* *2)++ 3.37+ .-+- +.*+

+* *2)+3++ 7.33+ .4+3 +.*7-

+* *2)+7++ 3.++ .-7- +.*4

+* *2)+7+ 7.*7+ .243 +.*73

+* *2)+2++ 3.2+ .*3 +.-

+* *2)++ !A 33+.+++ +.2 +.+34

+* *2)+ 0M 3.+++ +.34* +.+42

+* *2)+ 44.+++ +. +.3

+* *2)-++ #la"ed (oncrete $loc% for (oe base, ++ mm x *++ mm, +mm thic%,no reinforcing 22.+++ +.4 +.*2

+* *2)-+ 7*.+++ +.7+3 +.7-

>egular bloc%, tooled &oints, sides, hollow not reinforced, ++ mm x *++ mm x ++mm thic%

+.+ 'oreman*.+++ $ric%layers.+++ $ric%layer Belpers+.+ !quip. perator+.+ Mixer +.2 m3+.++ Power Tools+. (rane+. 'or% 0ift+. Truc%+.++ Bodcarrier

>egular bloc%, tooled &oints, sides, hollow not reinforced, ++ mm x *++ mm x +mm thic%

>egular bloc%, tooled &oints, sides, hollow not reinforced, ++ mm x *++ mm x 3++mm thic%

>egular bloc%, no tooled &oints, hollow , non ) reinforced, ++ mm x *++ mm x ++ mm

thic%>egular bloc%, no tooled &oints, hollow , non ) reinforced, ++ mm x *++ mm x + mmthic%

>egular bloc%, no tooled &oints, hollow , non ) reinforced, ++ mm x *++ mm x ++ mmthic%

>egular bloc%, no tooled &oints, hollow , non ) reinforced, ++ mm x *++ mm x + mmthic%

COCRETE SCREE '*OC;$ Including Scaffolding


#la"ed (oncrete $loc%, 5ingle face, ++ mm x *++ mm units, ++ mm thic%,noreinforcing


#la"ed (oncrete $loc%, 5ingle face, ++ mm x *++ mm units, + mm thic%,noreinforcing

#la"ed (oncrete $loc%, 5ingle face, ++ mm x *++ mm units, ++ mm thic%,noreinforcing

#la"ed (oncrete $loc%, Fouble face, ++ mm x *++ mm units, ++ mm thic% ,noreinforcing

#la"ed (oncrete $loc%, Fouble face, ++ mm x *++ mm units, + mm thic%,noreinforcing

#la"ed (oncrete $loc%, Fouble face, ++ mm x *++ mm units, ++ mm thic%,noreinforcing

#la"ed (oncrete $loc% for @ambs, bullnose or square, single, face, ++ mm x *++ mm,++ mm thic%,no reinforcing

#la"ed (oncrete $loc% for (aps, bullnose or square, ++ mm x *++ mm,++ mmthic%,no reinforcing

+.+ 'oreman*.+++ $ric%layers.+++ $ric%layer Belpers

+.+ !quip. perator+.+ Mixer +.2 m3+.++ Power Tools+. (rane+. 'or% 0ift+. Truc%+.++ Bodcarrier

#la"ed (oncrete $loc% for (oe base, ++ mm x *++ mm, ++ mm thic%,no reinforcing

#la"ed (oncrete $loc% for (oe base, ++ mm x *++ mm, ++ mm thic%,no reinforcing


7/12Page 74

ITEM DESCRIPTIO UIT

DI.ISIO 04 $ MASOR!

CSICODE

CRE-STRUCTURE

DAI*!OUTPUT

MA)OURS

E/UIP)OURS

042 2(2

+* )+++ 56M $ric%layer 2+.+++ +.++ +.+++

+* )++ 7+.+++ +.* +.+++

+* )+3++ -+.+++ +.33 +.+++

+* )+++ -+.+++ +.33 +.+++

+* )+++ Perlite insulation fill in bloc% cores, site mix, ++ mm x *++ mm x ++ mm bloc%s 2+.+++ +.+24 +.+++

+* )++ Perlite insulation fill in bloc% cores, site mix, ++ mm x *++ mm x + mm bloc%s +.+++ +.+7 +.+++

+* )2++ Perlite insulation fill in bloc% cores, site mix, ++ mm x *++ mm x ++ mm bloc%s .+++ +.2 +.+++

042 2"0

042 %00 REIORCED UIT MASOR!

042 %04

+* 3+*)+++ 0M 43.37+ +.7 +.34

+* 3+*)++ 7.34+ +.72 +.2

+* 3+*)+++ 42.-4+ +.7 +.3

+* 3+*)++ .34+ +.434 +.3

+* 3+*)+ *3.2++ .27 +.47

+* 3+*)++ 2.4+ +.22 +.

042 %10

+* 3+)+++56M

3.3*+ .-4 +.*

+* 3+)+++ -.*+ .4-- +.*4

+* 3+)++ 3.-*+ .++ +.+

+* 3+)+++ 3*.7+ .+* +.37-

+* 3+)+-++ 4.2+ .72 +.**-

+* 3+)+-+ .*++ .3 +.2+

042 %2(

+* 3)+++ 56M 37.7+ .344 +.3+

+* 3)++ 3.4+ .2+ +.34

+* 3)+3++ 56M 7.72+ .27 +.*-2

+* 3)+++ 37.7+ .344 +.3+

+* 3)++ 3.4+ .2+ +.34

ISU*ATIO See also division 072-108

9nsulation, inserts, styrofoam, plant installed,for bloc% units si"e ++ mm x *++ mm,+ mm thic%

9nsulation, inserts, styrofoam, plant installed,for bloc% units si"e ++ mm x *++ mm,++ mm thic%

9nsulation, inserts, styrofoam, plant installed,for bloc% units si"e ++ mm x *++ mm,+ mm thic%

9nsulation, inserts, styrofoam, plant installed,for bloc% units si"e ++ mm x ++ mm,++ mm thic%

$ric%layer $ric%layer Belper

REIORCI#$ See division 041 -512

COCRETE '*OC; 'OD 'EAM$ Including Scaffolding

(oncrete $loc% $ond $eam, no reinforcement,no grout, regular bloc% ++ mm high,++ mm thic%


(oncrete $loc% $ond $eam, no reinforcement,no grout, regular bloc% ++ mm high,

3++ mm thic%(oncrete $loc% $ond $eam,lightweight, no reinforcement,no grout, regular bloc% ++mm high, ++ mm thic%

(oncrete $loc% $ond $eam, including grout and x + mm bars reinforcing regularbloc% ++ mm high, ++ mm thic%

(oncrete $loc% $ond $eam, including grout and x + bars reinforcing regular bloc%++ mm high, 3++ mm thic%

(oncrete $loc% $ond $eam, including grout and x + bars reinforcing lightweight ++mm high, ++ mm thic%

COCRETE '*OC;6 ETERIOR: Reinforced, ooled !oins 2 sides s"rofoa# insers

!xterior concrete >egular bloc%,reinforced,tooled &oints sides / styrofoam inserts ++

mm x *++ mm x + mm thic%

+.+ 'oreman*.+++ $ric%layers.+++ $ric%layer Belpers+.+ !quip. perator+.+ Mixer +.2 m3

+.++ Power Tools+. (rane+. 'or% 0ift+. Truc%+.++ Bodcarrier

!xterior concrete >egular bloc%,reinforced,tooled &oints sides / styrofoam inserts ++mm x *++ mm x ++ mm thic%

!xterior concrete >egular bloc%,reinforced,tooled &oints sides / styrofoam inserts ++mm x *++ mm x + mm thic%

!xterior concrete lightweight bloc%,reinforced,tooled &oints sides / styrofoam inserts++ mm x *++ mm x + mm thic%

!xterior concrete lightweight bloc%,reinforced,tooled &oints sides / styrofoam inserts++ mm x *++ mm x ++ mm thic%

!xterior concrete lightweight bloc%,reinforced,tooled &oints sides / styrofoam inserts++ mm x *++ mm x + mm thic%

COCRETE '*OC; )I#) STRE#T)$ Including Scaffolding

(oncrete $loc%, Bigh 5trength, Bollow, reinforced, ++ mm x *++ mm units, + -2%Pa, ++ mm thic%


(oncrete $loc%, Bigh 5trength, 5caffolding not included, Bollow, reinforced, ++ mm x*++ mm units, + -2 %Pa, + mm thic%

(oncrete $loc%, Bigh 5trength,Bollow, reinforced, ++ mm x *++ mm units, + -2%Pa, ++ mm thic%

+.+ 'oreman*.+++ $ric%layers

.+++ $ric%layer Belpers+.+ !quip. perator+.+ Mixer +.2 m3+.++ Power Tools+. (rane+. 'or% 0ift+. Truc%+.++ Bodcarrier

(oncrete $loc%, Bigh 5trength,Bollow, reinforced, ++ mm x *++ mm units, 3* *7%Pa, ++ mm thic%

(oncrete $loc%, Bigh 5trength, Bollow, reinforced, ++ mm x *++ mm units, 3* *7%Pa, + mm thic%


8/12Page 2+

ITEM DESCRIPTIO UIT

DI.ISIO 04 $ MASOR!

CSICODE

CRE-STRUCTURE

DAI*!OUTPUT

MA)OURS

E/UIP)OURS

+* 3)+-++ 7.72+ .27 +.*-2

042 %%0

+* 33+)+++ 0M 4.24+ +.-- +.*

+* 33+)++ 2.+ +.- +.3

+* 33+)+*++ -2.++ +.7-* +.4

+* 33+)+*+ -*.+ +.2+- +.+

+* 33+)+++ -4.++ +.73 +.22

+* 33+)+ 4.4+ +.2-2 +.7

+* 33+)++ *.3+ +.47 +.34

+* 33+)-++ -7.*-+ +.77 +.43

042 %%( COCRETE '*OC; CO*UM

+* 33)+-+ 0M .+ *.+ .27

+* 33)+7+ +.2+ .+2 3.+

+* 33)+2+ 4.*7+ .*4 3.*2

+* 33)+4+ 2.-+ -.4 3.44

042 (00

042 ((0 MASOR! .EEER

042 ((4 'RIC; .EEER$

+* *)+++ $ric% ?eneer,5tandard ++ mm x 7 mm x *+ mm, running bond, ? ) Tooled &oints 56M -.42 .7- +.2+3

+* *)+++ $ric% ?eneer, 5tandard ++ mm x 7 mm x *+ mm, 'ull header eery -th course 3.32 3.+ +.4-+

+* *)+7++ $ric% ?eneer, #la"ed face, ++ mm x 7 mm x *+ mm, running bond *.42 .437 +.2-2

+* *)+7+ $ric% ?eneer, #la"ed face, ++ mm x 7 mm x *+ mm, 'ull header eery -th course . 3.* .+32

+* *)+++ $ric% ?eneer, @umbo, + mm x ++ mm x 3++ mm,running bond 3.*2* .27* +.*

+* *)++ $ric% ?eneer, !conomy, ++ mm x ++ mm x ++ mm,running bond 4.-37 .* +.--

+* *)++ .33* 3.22 .*7

+* *)+ +.24 *.77 .-*

+* *)+ 4.4 *.- .3--

042 ?00 #*ASS UIT MASOR!

042 ?04 #*ASS '*OC;$

+* 7+*)+++ 56M 7.4-+ .7- .3

+* 7+*)++ +.7+ 3.4+7 +.237

+* 7+*)+++ .37+ 3.34 +.72

+* 7+*)+3++ 4.+ *.4+ +.42*

+* 7+*)+3+ .3-+ 3.342 +.72

(oncrete $loc%, Bigh 5trength, Bollow, reinforced, ++ mm x *++ mm units, 3* *7%Pa, ++ mm thic%

COCRETE '*OC; *ITE*S$ Scaffolding Included

(oncrete $loc%, 0intels, including grout and reinforcing, ++ mm x ++ mm x ++ mm,x + mm bar


(oncrete $loc%, 0intels, including grout and reinforcing, ++ mm x ++ mm x ++ mm, x+ mm bar

(oncrete $loc%, 0intels, including grout and reinforcing, ++ mm x *++ mm x ++ mm,x+ mm bar

(oncrete $loc%, 0intels, including grout and reinforcing, ++ mm x *++ mm x ++ mm, x+ mm bar

(oncrete $loc%, 0intels, including grout and reinforcing, 3++ mm x ++ mm x ++mm,x+ mm bar

(oncrete $loc%, 0intels, including grout and reinforcing, 3++ mm x ++ mm x ++ mm,x- mm bar

(oncrete $loc%, 0intels,including grout and reinforcing, 3++ mm x ++ mm x ++ mm,x+ mm bar

(oncrete $loc%, 0intels, including grout and reinforcing, 3++ mm x *++mm x ++ mm,x+ mm bar

(oncrete bloc% column or pilaster, including reinforcement / grout,si"e *++ mm x *++ mm. bloc% si"e *++ x ++ x ++ mm

+.+ 0abor foreman+.+ !qp. operator*.+++ $rea% layers.+++ Belpers.+++ $ric% layer helpers+.37 Mixing m


9/12

ITEM DESCRIPTIO UIT

DI.ISIO 04 $ MASOR!

CSICODE

CRE-STRUCTURE

DAI*!OUTPUT

MA)OURS

E/UIP)OURS

+* 7+*)+++ 4.4+ *. +.4+

+* 7+*)++ 3.**+ 3. +.-7+

+* 7+*)+2++ 56M +.7+ 3.4+7 +.237

+* 7+*)+2+ 3.**+ 3. +.-7+

+* 7+*)+++ 7.4-+ .7- .3

+* 7+*)++ +.7+ 3.4+7 +.237

+* 7+*)++ 4.4+ *. +.4+

+* 7+*)+ 3.**+ 3. +.-7+

+* 7+*)*++ #lass $loc%, for cleaning bloc% after installation Cboth sidesD, add 7.+++ +.-+ +.+

042


10/12

Page 2

ITEM DESCRIPTIO UIT

DI.ISIO 04 $ MASOR!

CSICODE

CRE-STRUCTURE

DAI*!OUTPUT

MA)OURS

E/UIP)OURS

+** +*)+++ .73+ 7.33 .4*

044 (0+ *I#)T-EI#)T ATURA* STOE$

+** +2)+++ 56M 7.++ .73 +.*+-

044 ((0 MAR'*E

044 ((4 MAR'*E$

+** *)+++ Marble base, polished, + mm thic%, polished,+ mm high 0M -3.+++ +.--7 +.+74

+** *)+-++ 56M 4.+++ *.--7 +.-

+** *)++ .+++ 3.++ +.*7

+** *)3++ +.++ *.+++ +.*7-

+** *)*++ 4.+++ *.--7 +.-

+** *)++ Marble facing, polished finish, cut to si"e, + mm thic%, mechanical installation aerage 2.+ .+4 +.-+-

+** *)+ 4.+++ *.--7 +.-

+** *)-++ 2.+++ .+ +.-

+** *)++ Marble, indow 5ills, + mm x + mm thic% -.+++ +.-24 +.+2

+** *)+ Marble, 'looring, polished tiles, 3++ mm x 3++ mm x + mm,thin set, Aerage +.+ .73 +.*4*

+** *)7++ Marble, 'looring, polished tiles, 3++ mm x 3++ mm x + mm,mortar bed, Aerage -.++ .--7 +.-+-

+** *)72+ .+++ .433 +.--7

+** *)2++ Marble flooring for patio tile, non)slip, 3 mm thic%,mortar bed, flame finish 2.+++ .*** +.-

+** *)4++ Marble partitions for shower or toilet + mm thic% 2.+++ .*** +.-

+** *)3+ Marble for stair risers + mm thic%, + mm high. 0M 4.+++ .724 +.*

+** *)33-+ Marble stair treads, 3++ mm wide x 3+ mm thic% random lengths ,, 4.+++ .724 +.*

+** *)3++ !A 4.2++ .77 +.*+*

+** *)37++ Marble for window 5tools,polished + mm thic%, 3+ mm wide 0M 2.+++ .224 +.***

044 "00 *IMESTOE

044 "04

+** -+*)++ 0imestone,(oping,smooth finish,top / sides, 3+ mm x ++ mm x - m long. !A .+++ -.2++ .-++

+** -+*)+3+ 0imestone,(oping,smooth finish,top / sides, 3+ mm x ++ mm x 2 m long *.+++ 2.++ .+++

+** -+*)++ 0imestone, (oping, smooth finish, top / sides, 3+ mm x ++ mm x m long .+++ .-7 +.33

+** -+*)3++ 0imestone for steps,extra hard, 3- mm wide, + mm rise 0M +.+++ .7++ +.*++

044 "(0 #RAITE$

044 "(1 #RAITE$

+** -)++ 56M +.++ *.+++ +.*7-

+** -)+3++ #ranite ?eener,polished face, *+ mm to - mm thic%, mechanical installation aerage 2.+ .+4 +.-+-

+** -)+7++ #ranite ?eener,polished face, - mm to ++ mm thic%, mechanical installation aerage 7.++ .-++ +.--7

+** -)+2++ 7.3+ .7* +.-2+

+** -)+2+ .72+ 7.-- +.2-

, , ,x 2++ x + mm, mechanical installation, high rise building oer floors / up to 3+

0ightweight natural stone laa type,eneer,rubble face,or sawed face,sawedbac%,irregular shapes

+. $ric%layer 'oreman*.++ $ric%layer*.++ $ric%layer Belpers.++ !quip. perator+.7 Truc% crane ton+.+ Power Tool+. Mixer

+. 'oreman3.+++ $ric%layers.+++ $ric%layer Belpers+. !quip. perator+.++ Power Tool

Marble facing for (olumns, cornices, mouldings, etc., hand or special machine cut, upto *.++ meter high, aerage

Marble facing, polished finish, cut to si"e, + mm to mm thic% mechanicalinstallation aerage

Marble facing, polished finish, cut to si"e, 3 mm thic%, mechanical installation, aerage

Marble facing, polished finish, cut to si"e, *+ mm thic%, mechanical installation, aerage

Marble, wall facing, cut to si"e, 3++ x 2++ x *+ mm thic% Traentine, scaffolding notincluded,Aerage.

Marble, wall facing, cut to si"e, 3++ x 2++ x *+ mm thic% Traentine,$uilding from - floors up to + floors,scaffolding not included, Aerage.

+.+ $ric%layer 'oreman3.+++ $ric%layer.+++ $ric%layer Belper+. !quip. perator+. Mixer +.2 m3+. (rane Ton+.++ Power Tool+.++ Bodcarrier

Marble, 'looring, polished tiles, 3++ mm x 3++ mm x + mm, Traertine,mortar bed,aerage

+.+ $ric%layer 'oreman.+++ $ric%layer.+++ $ric%layer Belper.+++ !quip. perator.+++ Truc% (rane Ton

Marble for thresholds, 4+ mm 0, + mm thic%, ++ mm to + mm , Plain or $eeled

*IMESTOE$ See also &s'lar (eneer, $ivision 044-504


#ranite ?eener,polished face, + mm to 3+ mm thic%, mechanical installation straight&ob, aerage

+. $ric%layer 'oreman3.+++ $ric%layer.+++ $ric%layer Belpers+. !quip.per.CcraneD+. Truc% (rane, metric ton+.++ Power Tool

#ranite ?eener,polished face + mm thic% to 3+ mm thic%, mechanical installation forcured wall under . m,radius.

#ranite ?eener,polished face *+ mm thic% to -+ mm thic%,for cured wall under .m,radius.


11/12

ITEM DESCRIPTIO UIT

DI.ISIO 04 $ MASOR!

CSICODE

CRE-STRUCTURE

DAI*!OUTPUT

MA)OURS

E/UIP)OURS

+** -)+2*+ .+ 2.+++ +.4

+** -)+2-+ #ranite eneer, cut to si"e, 3++ mm x -++ mm x 3+ mm,mechanical installation. .++ 3.- +.*3

+** -)+22+ #ranite eneer, cut to si"e, *++ mm x *++ mm x 3+ mm,mechanical installation. +.++ *.+++ +.*7-

+** -)+4++ #ranite eneer, cut to si"e, 3++mm x 3++ mm x 3+ mm,mechanical installation. 56M 4.++ *.- +.*3

+** -)+4+ #ranite eneer, cut to si"e, 3++ mm x -++ mm x *+ mm,mechanical installation. 4.+++ *.--7 +.-

+** -)+4*+ #ranite eneer, cut to si"e, *++ mm x *++ mm x *+ mm,mechanical installation. 2.+ .+4 +.-+-

+** -)+4-+ #ranite eneer, cut to si"e, 3++ mm x 3++ mm x *+ mm,mechanical installation. 7.+ .27 +.-43

+** -)+42+ #ranite eneer, cut to si"e, *++ mm x 2++ mm x + mm,mechanical installation. .32+ 3.343 +.*+*

+** -)+++ #ranite eneer, cut to si"e, -++ mm x++ mm x -+ mm,mechanical installation. *.2+ .22 +.337

+** -)+++ 7.+++ -.+++ +.7*

+** -)++ -.+++ 7.+++ +.233

+** -)++ .*+ .77 .47

+** -)+ .+++ .733 +.433

+** -)+ *.+++ -.*3 .+++

+** -)++ #ranite 5tair riser, + mm thic%, + mm high,aerage 0M 3+.+++ .33 +.-7

+** -)+ #ranite 5tair tread, 3+ mm thic%, 3+ mm wide, . meter long, aerage : : 3+.+++ .33 +.-7

+** -)2++ #ranite Paers,++ mm x ++ mm x ++ mm bloc%s,split face and &oints,aerage 56M 3.++ 3. +.4

+** -)*+++ #ranite 5offits, + mm thic%,aerage -.7+ -. .+37

+** -)*++ #ranite 5offits,++ mm thic%,aerage -.7+ -. .+37

+** -)+++ #ranite 'looring,3++ mm x 3++ mm + mm thic%,mortar bed,aerage .+++ .2++ +.*-7

+** -)+++ #ranite 'looring,3++ mm x 3++ mm 3+ mm thic%,mortar bed,aerage 3.+++ 3.3 +.32

044 ?00 SADSTOE

044 ?04

+** 7+*)+++ 56M -.7+ -. +.7*

+** 7+*)++ 7.*3+ .-3 +.-73

+** 7+*)*++ 2.*+ *.42 +.2

+** 7+*)-++ 4.+++ *.--7 +.-

+** 7+*)2++ 4.4++ *.* +.+

+** 7+*)+++ +.++ *.+++ +.*7-

+** 7+*)*++ 4.7+ *.3+2 +.3

+** 7+*)-++ 56M 4.+++ *.--7 +.-

+** 7+*)2++ 2.+ .+4 +.-+-

#ranite ?eener,polished face - mm thic% to ++ mm thic%,for cured wall under .m,radius.

+. $ric%layer 'oreman3.+++ $ric%layer.+++ $ric%layer Belpers+. !quip.per.CcraneD+. Truc% (rane, metric ton+.++ Power Tool

#ranite eneer to high rise building mole C -)+ floorsDH mechanical installationH *+ to-+ mm thic%

#ranite eneer to high rise building mole C -) + floorsDH mechanical installationH - to++ mm thic%

Precast concrete panel with granite eneer,oerall thic%ness, ++ mm, #ranite *++ mm

x 2++ x + mm,mechanical installation, high rise building oer floors.

+. $ric%layer 'oreman*.++ 5teel 5tructure or%ers*.++ $ric%layer.++ $ric%layer Belpers+.+ !quip. perator

+.+ Tower crane + m high, * m boom, ton tip load+. Truc%.++ Power Tool.++ B+dcarrier

, , ,x 2++ x + mm,mechanical installation, high rise building oer floors / up to

, , ,x 2++ x + mm,mechanical installation, high rise building oer floors / up to 3+


+. $ric%layer 'oreman3.+++ $ric%layer.+++ $ric%layer Belper+. !quip. perator+. Mixer +.2 m3+. (rane Ton+.++ Power Tool+. Bodcarrier

SADSTOE OR 'RO-STOE$ &dd for scaffolding

5andstone eneer,cut to si"e, smooth finish, mechanical installation, ++mm x 7+ mmx *+ mm

+. $ric%layer 'oreman3.++ $ric%layer.++ $ric%layer Belper+. !quip. perator+. (rane Ton+.++ Power Tool

5andstone eneer,cut to si"e, smooth finish, mechanical installation, 3++ mm x + mmx *+ mm

5andstone eneer,cut to si"e, smooth finish, mechanical installation, 3++ mm x+ mmx *+ mm

5andstone eneer,cut to si"e, smooth finish, mechanical installation, *++ mm x ++mm x *+ mm

5andstone eneer,cut to si"e, smooth finish, mechanical installation, *++ mm x +mm x *+ mm

5andstone eneer,cut to si"e, smooth finish, mechanical installation, -++ mm x 3++mm x + mm

5andstone eneer,cut to si"e, smooth finish, mechanical installation, -++ mm x 3++mm x *+ mm

5andstone eneer,cut to si"e, smooth finish, mechanical installation, -++ mm x 3++mm x + mm


5andstone eneer,cut to si"e, bush hammered, mechanical installation, -++ mm x 3++mm x -+ mm


12/12

Page 2*

ITEM DESCRIPTIO UIT

DI.ISIO 04 $ MASOR!

CSICODE

CRE-STRUCTURE

DAI*!OUTPUT

MA)OURS

E/UIP)OURS

+** 7+*)3+++ 4.7+ *.3+2 +.3

+** 7+*)3++ 4.+++ *.--7 +.-

+** 7+*)3*++ 56M 2.+ .+4 +.-+-

04( MASOR! RESTORATIO & C*EAI#@RERACTORIES

04( 100 MASOR! C*EAI#

04( 10" C*EA AD POIT$

+* +-)+++ (lean and point smooth bric% 56M $ric%layer 3.+++ +.3*2 +.+++

+* +-)+++ (lean and point rough bric% : : +.+++ +.*++ +.+++

04( 10+ -AS)I# 'RIC;$

+* +2)+++ ashing smooth bric%, acid wash 56M $ric%layer *.+++ +.4+ +.+++

+* +2)+++ ashing rough bric% acid wash 3+.+++ +.-7 +.+++

+* +2)++-+ ashing stone,acid wash *.+++ +.72 +.+++

04( ((0 *UE *IERS

04( ((4 *UE *II#$

+* *)+++ >estoration 'lue 0ining,including mortar &oints 56M 2.+++ +.224 +.+++

5andstone eneer, cut to si"e, bush hammered, mechanical installation, -++ mm x 3++mm x *+ mm

5andstone eneer, cut to si"e, bush hammered, mechanicalinstallation, -++ mm x 3++ mm x + mm

5andstone eneer, cut to si"e, bush hammered, mechanicalinstallation, -++ mm x 3++ mm x-+ mm


$ric%layer $ric%layer Belpers

Date post:	20-Feb-2018
Category:	Documents
Upload:	farhanyazdani
View:	217 times
Download:	0 times

Labor Norms 2

Documents