Laboratory : Material Testing House (India) Limited, VisakhapatnamField : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Sl.No Product/ Specific TestMaterial of PerformedTest
1 Brick including Clay i) Compressive Strength
And* Fly ash Bricks ii) Water Absorption
IS:1077 iii) Efflorescence
IS:12894 iv) Warpage
v) Dimensions
2 Acid Resistance i) Water AbsorptionBricks ii) Compressive strength
3 Concrete Blocks i) Water AbsorptionHollow/Solid/ ii) Compressive StrengthFly ash Blocks iii) Density
iv) Efflorescence
4 Cement Concrete i) Flatness/ plain cement ii) Perpendicularity/ Terrazzo iii) StraightnessTiles iv) Dimensions
v) Water Absorptionvi)Wet transverse strengthvii) Abrasion test
5 Cement Concrete i) Flatness/ Plain cement ii) Perpendicularity/ Terrazzo iii) StraightnessChequered Tiles iv) Dimensions
v) Water Absorptionvi) Wet transverse strengthVii) Abrasion test
6 PCC cable covers i) Impact Strengthii) Transverse strengthiii) Dimensions
7 Cement Concrete i) Compressive strengthCubes ii) Splitting tensile strength
8 Cement Concrete ii) Flexural strengthBeams
9 Concrete Mix design i) Design Mix of concreteii) Self Consolidating Concreteiii) Accelerated curing
For scope of NABL accreditation; See NABL scope The above rates will be revised time to time. Contact the lab for the latest test charges
Material Testing House (India) Limited, VisakhapatnamMechanical TestingBuilding Materials, Steel, Tiles & Miscellaneous
Price List MasterSpecific Test Test Method specification Testing
against which tests are Tax extra @ 12.36%) Chargesperformed extra for sample Preparation
where ever required. Samples sizegiven at side of(Valid from
i) Compressive Strength IS : 3495 – 1992 (Pt-1)
ii) Water Absorption IS : 3495 – 1992 (Pt-2)
iii) Efflorescence IS : 3495 – 1992 (Pt-3)
IS : 3495 – 1992 (Pt-4)
v) Dimensions IS : 1077 Cl 6,2,1 1992
i) Water Absorption IS : 4860 - 1968ii) Compressive strength IS : 4860 - 1968
i) Water Absorption IS : 2185 – 2005 (Pt-1)ii) Compressive Strength IS : 2185 – 2005(Pt-1)
IS : 2185 – 2005 (Pt-1)Efflorescence
IS : 1237 – 2012Perpendicularity IS : 1237 – 2012
iii) Straightness IS : 1237 – 2012iv) Dimensions IS : 1237 – 2012v) Water Absorption IS : 1237 – 2012vi)Wet transverse strength IS : 1237 – 2012vii) Abrasion test IS : 1237 – 2012
IS: 13801-1993ii) Perpendicularity IS: 13801-1993iii) Straightness IS: 13801-1993iv) Dimensions IS: 13801-1993v) Water Absorption IS: 13801-1993vi) Wet transverse strength IS: 13801-1993Vii) Abrasion test
i) Impact Strength IS : 5820 – 1970ii) Transverse strength IS : 5820 – 1970iii) Dimensions IS : 5820 – 1970
i) Compressive strength IS : 516 – 1959ii) Splitting tensile strength IS : 5816 – 1999
ii) Flexural strength IS : 516 – 1959
IS : 456-2000i) Design Mix of concrete IS : 10262- 2009ii) Self Consolidating Concrete ACI 237R-07iii) Accelerated curing IS:9013-1978
For scope of NABL accreditation; See NABL scope -MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Page 1 of 9
Testing charges in Rs. (ServiceTax extra @ 12.36%) Chargesextra for sample Preparationwhere ever required. Samples sizegiven at side of testing charges.(Valid from 24 Oct, 2013)
900/- 5
900/- 5
900/- 5
300/- 5
300/- 20
1200/-1200/-
1500/- 33000/- 8900/- 81500/- 5
250/- 6250/- 6250/- 6250/- 6900/- 63000/- 63000/- 6
250/- 6250/- 6250/- 6250/- 6900/- 63000/- 63000/- 6
3000/- 123000/- 15300/-
900/- per 3 cubes1800/- per 3 cubes
2700/- per 3 beams
18000/- (3 trails)27000/-6000/- per Set
MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Laboratory : Material Testing House (India) Limited, VisakhapatnamField : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Sl.No Product/ Specific TestMaterial of PerformedTest
10 Cement Concrete Non – Destructive testi) Rebound Hammer
ii)UPV test
11 Coarse Aggregate i) Sieve analysisii) Bulk densitya)Looseb)rodediii) Specific gravity
iv) Water Absorption
v) Impact Valuevi) Crushing Valuevii) Elongation indexviii) Flakiness Indexix) Voidsx) Moisture contentxi) Loss Angeles xii) 10 % Fines valuexiii) Soundnessxiv) Impact valuexv) Deleterious Materialxvi) Alkali AggregateReactivity(chemical method)
12 Fine Aggregate i) Sieve analysisii) Bulk Densityiii) Specific gravityiv) Moisture contentv) Soundnessvi) Deleterious vii)Organic imuritiesvii)Ymax & Ymin
13 Rock / Stone i) Water Absorption(Prepared sample to be ii) Specific gravitySubmitted by customer iii) Compressive strengthas per IS) iv) Split Tensile strength*Sample preparation v) Transverse strengthRs.2000/-each vi) Brazilian (Tensile strengthspecimen
vii) Point load strength index*C.S, STS, TS viii)Bulk DensityEach test 12 specimen ix)Porosityrequired x)Slake Durability
xi) Durability(soundness)for Cylinders
For scope of NABL accreditation; See NABL scope The above rates will be revised time to time. Contact the lab for
Material Testing House (India) Limited, VisakhapatnamMechanical TestingBuilding Materials, Steel, Tiles & Miscellaneous
Price List MasterSpecific Test Test Method specification Testing charges in Rs. (Service
against which tests are Tax extra @ 12.36%) Chargesperformed extra for sample Preparation
where ever required. Samples sizegiven at side of testing charges.(Valid from
Destructive testHammer IS: 13311 (part 2)-1992
IS: 13311 (part 1)-1992
i) Sieve analysis IS: 2386 (Pt-1)ii) Bulk density IS: 2386 (Pt-3)
iii) Specific gravity IS : 2386 (Pt-3)
iv) Water Absorption IS : 2386 (Pt-3)
v) Impact Value IS: 2386 (Pt-4)vi) Crushing Value IS : 2386 (Pt-4)vii) Elongation index IS: 2386 (Pt-1)viii) Flakiness Index IS : 2386 (Pt-1)
IS : 2386 (Pt-3)x) Moisture content IS : 2386 (Pt-3)xi) Loss Angeles Abrasion IS : 2386 (Pt-4)xii) 10 % Fines value IS : 2386 (Pt-4)xiii) Soundness IS : 2386 (Pt-5)xiv) Impact value IS : 5640 – 1970xv) Deleterious Material IS : 2386 (Pt-)3)xvi) Alkali Aggregate IS:2386(Part-7)
(chemical method)
i) Sieve analysis IS : 2386 (Pt-1)ii) Bulk Density IS : 2386 (Pt-3)iii) Specific gravity IS : 2386 (Pt-3)iv) Moisture content IS : 2386 (Pt-3)v) Soundness IS : 2386 (Pt-5)vi) Deleterious Material IS : 2386 (Pt-3)vii)Organic imurities IS : 2386 (Pt-3)vii)Ymax & Ymin IS : 2720 (Part-14)
i) Water Absorption IS : 1124 – 1974ii) Specific gravity IS : 1122 – 1974
Compressive strength IS : 1121 –1974 (Pt-1)iv) Split Tensile strength IS: 1121-1974 (Pt-3)v) Transverse strength IS: 1121-1974 (Pt-2)vi) Brazilian (Tensile strength IS: 10082 -1981
Point load strength index IS: 8764 – 1998viii)Bulk Density IS:2386(Pt-3)1963
IS : 1124 – 1974x)Slake Durability IS: 10050 – 1981xi) Durability(soundness) IS: 1126 – 1974
for Cylinders
3500/@ 1 Sq. ft. area 8000/
600/
600/600/600/
600/
900/1500/600/600/900/600/1500/2000/3000/2400/1200/1
600/600/1200/
600/600/600/900/900/900/
900/each 600/1200/
varies
For scope of NABL accreditation; See NABL scope -MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Page 2 of 9
Testing charges in Rs. (ServiceTax extra @ 12.36%) Chargesextra for sample Preparationwhere ever required. Samples sizegiven at side of testing charges.(Valid from 24 Oct, 2013)
3500/- per 10 impacts @ 1 Sq. ft. area 8000/- per point
600/- 80 kg. plus
600/-600/-600/-
600/-
900/-1500/-600/-600/-900/-600/-1500/-2000/-3000/-2400/-1200/-15000/-
600/- 80 kg. Plus 600/-600/-600/-3000 /-1200/-1200/-12000/-
600/-600/-600/- per each 900/- per each 900/- per each 900/- per each
900/- per each 600/-1200/-3000/-
varies
Mechanicalthe latest test charges
Laboratory : Material Testing House (India) Limited, VisakhapatnamField : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Sl.No Product/ Specific TestMaterial of PerformedTest
14 Ceramic Tiles/ i) Dimensions andGlazed Tiles Surface qualityUn-Glazed Tiles/ ii) Water AbsorptionCeramic unglazed iii) Modulus of ruptureVitreous acid (Flexural Strength)Resisting Tiles iv) Resistance ofIS: 4457-1982 Thermal shock
v) Crazing resistancevi) Mohs hardness
15 Bentonite (Soil) i) slurry Densityii) Marsh Funnel viscosityiii) Liquid Limitiv) pH Value
16 Cement i) Specific gravityii) Consistencyiii) Initial settingiv) Final settingv) Fineness/Blain Airvi) Soundness(Le-Chatelier /Autoclave)
Vii) Compressive strength
17 Fly Ash i) Fineness/Blain Airii) Soundness(Le-Chatelier /Autoclave)
iii) Consistencyiv) Initial settingv) Final settingvii) Lime ReactivityVii) Compressive strengthviii) Drying shrinkageix) Specific Gravity
18 Ground granulated i) Fineness/Blain AirBlast Furnace Slag ii) SoundnessGGBS (Le-Chatelier /Autoclave)
iii) Initial settingiv) Final settingv) Compressive strengthvi) Specific Gravityvii) Glass
For scope of NABL accreditation; See NABL scope The above rates will be revised time to time. Contact the lab for the latest test charges
Material Testing House (India) Limited, VisakhapatnamMechanical TestingBuilding Materials, Steel, Tiles & Miscellaneous
Price List MasterSpecific Test Test Method specification Testing charges in Rs. (Service
against which tests are Tax extra @ 12.36%) Chargesperformed extra for sample Preparation
where ever required. Samples sizegiven at side of testing charges.(Valid from
i) Dimensions and IS : 13630 – 1992 (Pt-1)Surface quality
ii) Water Absorption IS : 13630 – 1992 (Pt-2)iii) Modulus of rupture IS : 13630 – 1993 (Pt-6)(Flexural Strength)
iv) Resistance of IS : 13630 – 1992 (Pt-5)Thermal shock
v) Crazing resistance IS : 13630 – 1992 (Pt-9)vi) Mohs hardness IS : 13630 – 1992 (Pt-13)
i) slurry Density ASTM D 6910 – 03ii) Marsh Funnel viscosity ASTM D 6910 – 03iii) Liquid Limit IS : 2720 (part 5) –1985iv) pH Value IS: 6186 : 1986 Cl. A – 3
i) Specific gravity IS: 4031-1988 (Pt-11)ii) Consistency IS : 4031-1988 (Pt-4)iii) Initial setting IS : 4031-1988 (Pt-5)iv) Final setting IS : 4031-1988 (Pt-5)v) Fineness/Blain Air IS : 4031- 1999 (Pt-2)vi) Soundness IS : 4031-1988 (Pt-3)
Chatelier /Autoclave)Vii) Compressive strength IS : 4031-1988 (Pt-6)
i) Fineness/Blain Air IS: 1727 –1967ii) Soundness IS : 1727-1967
Chatelier /Autoclave)iii) Consistency IS: 1727 –1967iv) Initial setting IS : 1727-1967v) Final setting IS: 1727 –1967vii) Lime Reactivity IS: 1727 –1967Vii) Compressive strength IS: 1727 –1967viii) Drying shrinkage IS: 1727 –1967ix) Specific Gravity IS: 1727 –1967
i) Fineness/Blain Air IS : 4031-1988 (Pt-2)ii) Soundness IS : 4031-1988 (Pt-3)
Chatelier /Autoclave) IS : 4031-1988 (Pt-5)) Initial setting IS : 4031-1988 (Pt-5)
v) Final setting IS : 4031- 1999 (Pt-5)) Compressive strength IS : 4031-1988 (Pt-6)
Specific Gravity IS : 4031-1988 (Pt-11)Glass content
Total 6000/
Physical & Chemical
Physical & Chemical
}
For scope of NABL accreditation; See NABL scope -MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Page 3 of 9
Testing charges in Rs. (ServiceTax extra @ 12.36%) Chargesextra for sample Preparationwhere ever required. Samples size
at side of testing charges.(Valid from 24 Oct, 2013)
3000/- 30
2400/- 103000/- 7
4000/- 54000/- 53000/- 3
Total 6000/-
4000/-
Physical & Chemical
} 20000/-
Physical & Chemical
} 220000/-
MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Laboratory : Material Testing House (India) Limited, VisakhapatnamField : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Sl.No Product/ Specific TestMaterial of PerformedTest
19(a) High Strength i) Ultimate Tensile stressDeformed Bars ii) 0.2% proof stressIS: 1786-1985 Reaff 2004 iii) Elongation(8 to 25mm dia only ) iv) Weight per meter &dia
v) Bendvi) Re bend
(b) Structural steel i) YieldIS:2062-1999 ii) Ultimate Tensile
iii) Elongationiv) Bender
20 Galvanized iron i) Mass of Zinc CoatingArticlesi) Barbed wire ii) Diameter of wireii) Zinc coated sheet/ iii) Thickness of sheetCorrugated sheet iv) Adhesioniii) General purpose v) UniformityGI coated strips, flatsRods, wires and pipes
21 Soils i) Grain a) Sieve analysisb) Sieve analysisc) hydro meter
ii) Moisture contentiii) Specific gravityiv) Sand content in soilsv) Atterberg Limitsa) Liquid Limitb) Plastic Limitvi)Heavy compactionvii) Light viii)California bearingratioix) Free swellx) Sand min & maxDensityxi) Density by sandReplacement methodxii) Density by core cuttermethod.xiii) Safe bearing capacityof soils based on shearParameters upto 45
22 Aluminum Extrusions i) Thickness of Anodizingand Sections Coating
For scope of NABL accreditation; See NABL scope The above rates will be revised time to time. Contact the lab for the
Material Testing House (India) Limited, VisakhapatnamMechanical TestingBuilding Materials, Steel, Tiles & Miscellaneous
Price List MasterSpecific Test Test Method specification Testing charges in Rs. (ServicePerformed against which tests are Tax extra @
performed extra for sample Preparationwhere ever required. Samples sizegiven at side of testing charges.(Valid from
i) Ultimate Tensile stress IS : 1608 – 2005ii) 0.2% proof stress IS : 1608 – 2005iii) Elongation IS : 1608 – 2005iv) Weight per meter &dia IS: 1786-1985v) Bend IS : 1599 – 1985vi) Re bend IS: 1786-1985
i) Yieldii) Ultimate Tensileiii) Elongationiv) Bender
i) Mass of Zinc Coating IS : 6745 –1972
ii) Diameter of wire IS : 278 – 1978iii) Thickness of sheet IS : 280 – 1978iv) Adhesion IS : 2629 – 1985v) Uniformity IS : 2633– 1986
i) Grain size analysis IS : 2720 (Pt-4) – 1985a) Sieve analysis Clause 3b) Sieve analysis Clause 4c) hydro meter Clause 5.1
ii) Moisture content IS : 2720 (Pt-2) – 1973iii) Specific gravity IS : 2720 (Pt-3.1) – 1980iv) Sand content in soils IS : 2720 (Pt-3.2) – 1985v) Atterberg Limitsa) Liquid Limit IS : 2720 (Pt-5) – 1985b) Plastic Limit IS : 2720 (Pt-5) – 1985vi)Heavy compaction IS : 2720 (Pt-8) – 1983vii) Light compaction IS : 2720 (Pt-7) – 1980viii)California bearing IS : 2720 (Pt-16) – 1987ratioix) Free swell IS:2720(Pt-40) - 1977x) Sand min & max IS:2720 Part 14Densityxi) Density by sand IS : 2720 (Pt-28)-1974Replacement methodxii) Density by core cutter IS : 2720 (Pt-29)-1975method.xiii) Safe bearing capacity IS : 6403 – 1981of soils based on shear IS : 2720 Part 12 – 1981Parameters upto 45T/sq.m
i) Thickness of Anodizing IS : 5523 – 1983Coating
For scope of NABL accreditation; See NABL scope -MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Page 4 of 9
Testing charges in Rs. (ServiceTax extra @ 12.36%) Charges
extra for sample Preparationwhere ever required. Samples sizegiven at side of testing charges.(Valid from 24 Oct, 2013)
2100/-(3 No.of 1m Each)
5400/-
2400/-
300/-300/-2400/-9000/-
600/-900/-1500/-
300/-600/-600/-1200/-
3000/-3000/-3000/-
1200/-12000/-
2400/-600/-
4000/-
2400/-
Mechanicallatest test charges
Laboratory : Material Testing House (India) Limited, VisakhapatnamField : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Sl.No Product/ Specific TestMaterial of PerformedTest
23 Bitumen i) Marshal stabilityPaving mixes a) StabilityAs per Ministry of b) Flow
Road Transport & ii) Bitumen ExtractionHighways/ IndianRoads Congress iii) Stripping value
24 Bitumen i) Penetrationi) Paving Bitumen(Straight grades) ii) DuctilityIS : 73 – 1992 iii) Specific gravity
iv) Softening pointii) Industrial Bitumen(Blown grades)IS : 702 – 1988
25 Paving Blocks i) Split tensile strengthii) Compressive Strength
26 Modified Bitumen i) PenetrationMembrane/ FeltGlass Fiber Felt ii) Softening point
iii) Pliability
iv) Tensile Strength
v) Elongation
vi) Heat resistance(Loss on heat)vii) Water Absorption
viii) Weight per squareMetre
27 Polyethylene films i) Thickness of filmii) Density
Polyethylene films for iii) ElongationWater proofing roofs iv) Tensile StrengthHDPE films
For scope of NABL accreditation; See NABL scope The above rates will be revised time to time. Contact the lab for the latest test charges
Material Testing House (India) Limited, VisakhapatnamMechanical TestingBuilding Materials, Steel, Tiles & Miscellaneous
Price List MasterSpecific Test Test Method specification Testing charges in Rs. (Service
against which tests are Tax extra @ 12.36%) Chargesperformed extra for sample Preparation
where ever required. Samples sizegiven at side of testing charges.(Valid from
i) Marshal stability ASTM – D 5581 – 1996(Reapproved 2001) 18
ii) Bitumen Extraction ASTM – D 2172 – 05e1 3000/
iii) Stripping value IS : 6241 – 1971 1500/
i) Penetration IS : 1203 –1978 1500/ASTM – D 5 – 05IS : 1208-1978 1500/
) Specific gravity IS : 1202 – 1978 1500/) Softening point IS : 1205 – 1978 1500/
ASTM – D 36 – 1995
i) Split tensile strength BS : 6717 –2001 1200/ii) Compressive Strength BS : 6717 : 1986 3000/
IS:15658-2006i) Penetration IS: 1203 –1978 2400/
ASTM D : 5 – 05ii) Softening point IS : 1205 – 1978 2400/
ASTM – D 36 – 1995(Reapproved 2000)IS : 13826 (Pt-2) –1993 2400/ASTM – D 146 –04
iv) Tensile Strength IS : 13826 (Pt-2) – 1993 2400/ASTM D : 412 – 98 a(Reapproved 2002)
v) Elongation IS : 13826 (Pt-1) – 1993 2400/ASTM D : 412 – 98 a(Reapproved 2002)
vi) Heat resistance IS : 13826 (Pt-5) – 1994 2400/(Loss on heat) ASTM D: 146 - 04vii) Water Absorption IS : 13826 (Pt-6) – 1993 600/
ASTM D : 412 – 98 a
per square ASTM – D 146 –04 Para 9 600/
i) Thickness of film IS:2508-1984 600/IS:2508-1984
iii) Elongation IS: 1969-1985 2400/Strength IS: 1969-1985
For scope of NABL accreditation; See NABL scope -MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Page 5 of 9
Testing charges in Rs. (ServiceTax extra @ 12.36%) Chargesextra for sample Preparationwhere ever required. Samples sizegiven at side of testing charges.(Valid from 24 Oct, 2013)
8000/- one Job Mix
3000/-
1500/-
1500/-
1500/-1500/-1500/-
1200/- each3000/- 8 no
2400/-
2400/-
2400/-
2400/-
2400/-
2400/-
600/-
600/-
600/-
2400/-(i to iv)
MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Laboratory : Material Testing House (India) Limited, Visakhapatnam Page 6 of 9Field : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Price List MasterSl.No Product/ Specific Test Test Method specification Testing charges in Rs. (Service
Material of Performed against which tests are Tax extra @ 12.36%) ChargesTest performed extra for sample Preparation
where ever required. Samples sizegiven at side of testing charges.(Valid from 24 Oct, 2013)
HDPE / PP Woven Sacks with papers Woven sacks packing HDPE / PP
28 Timber /wood
29 Plywood general Purpose Shuttering.
30 Ply wood / Pre-laminated particle Board
31 Wooden door shutter Paneled/flush/ Glazed / Gauzed Skeleton shutter PVC door shutters.
32 Rubber Fenders/ Rubber / Rubber Tiles
33 Tarpaulin
i) Moisture content IS : 11215 – 1991 1200/-(Hot Air Oven Method)ii) Specific gravity 1200/-
i) Density & Moisture IS: 1734 (part1)-1983 1200/-ii) Compressive strength IS: 1734 (part10)-1983 1200/-iii) Impact resistance IS: 1734 (part18)-1983 1200/-
i) Density & Moisture IS : 2380 (part 3) :1977 1200/-ii) water Absorption IS : 2380 (part 16) :1977 900/-iii) Swelling IS : 2380 (part 17) :1977 1200/-iv) Resistance to steam IS : 12823 : 1990 2400/-v) Cigarette burn IS : 12823 : 1990 1200/-vi) Crack IS : 12823 : 1990 1200/-vii) Falling Hammer IS : 2380 (part 10): 1977 1200/-Impact
i) Dimensions IS: 4020 (Pt-2) – 1998
}ii) Square ness IS: 4020 (Pt-2) – 1998 1200/-iii) Thickness IS: 4020 (Pt-2) – 1998iv) Local Plane ness IS: 4020 (Pt-4) – 1998 1200/-v) General flatness IS: 4020 (Pt-3) – 1998 1200/-vii) Impact indentation IS: 4020 (Pt-5) – 1998 2400/-viii) Flexure IS: 4020 (Pt-6) – 1998 2400/-ix) Edge Loading IS: 4020 (Pt-7) – 1998 2400/-x) Shock resistance IS: 4020 (Pt-8) – 1998 2400/-xi) Buckling resistance IS: 4020 (Pt-9) – 1998 2400/-xii) Slamming IS: 4020 (Pt-10) – 1998 2400/-xiii) Misuse IS: 4020 (Pt-11) – 1998 2400/-xiv) End Immersion IS: 4020 (Pt-13) – 1998 4800/-xv) Knife Test IS: 4020 (Pt-14) – 1998 2400/-xvi) Glue Adhesion IS: 4020 (Pt-15) – 1998 2400/-Test
i) Tensile Strength IS: 3400 (Pt-1) –1983 2400/-ii) Hardness – Shore ‘A’ IS: 3400 (Pt-2) – 2003 2400/-
iii) Water Absorption IS: 809 – 1992iv) Dimensions IS: 809 – 1992 300/-v) Density IS: 3400(pt-9)-1977 600/-
i) Breaking Load IS: 1969 – 1985 1200/-ii) Mass IS: 7407(Pt 1 to 3)-1980 300/-
For scope of NABL accreditation; See NABL scope -MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Laboratory : Material Testing House (India) Limited, VisakhapatnamField : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Sl.No Product/ Specific TestMaterial of PerformedTest
34 Foam i) Density
35 Paper i) Densityii) Thicknessiii) Specific gravity
36 Burnt Clay roof Tiles i) Water Absorption
Burnt Clay Hallow ii) Breaking LoadBricks iii) Crushing strength
iv) Compressive strengthBurnt Clay Tiles for v) Flexural Canal Lining andDrainage
37 Textiles i) Breaking loadii) Elongation
38 Builders Hardware i) Dimensionali) Aluminum/Brass requirementsBarrel tower/ skeleton ii) FinishBolts
ii) Aluminum/CI/ MS i) DimensionalDoor handles requirements
ii) Finish
iii) Aluminum alloy/ i) DimensionalMS/ Brass hasp & requirementsStaples of safety type ii) Manufacturing
defectsiii) Finish
iv) Aluminum/Alloy/ i) DimensionalMS/Brass parliament requirementsHinges. ii) Manufacturing defects
iii) Finish
v) MS and hard drawn i) Dimensionalcast brass hooks & requirementsPlates ii) Manufacturing defects
iii) Finish
vi) Aluminum i) Dimensionalalloy/brass sliding door requirementsBolts ii) Manufacturing defects
iii) Finish
vii) Aluminum i) Dimensionalalloy/MS/cast Brass requirementsfanlight catches. ii) Manufacturing defects
iii) Finish
For scope of NABL accreditation; See NABL The above rates will be revised time to time. Contact the lab for the latest test charges
Material Testing House (India) Limited, VisakhapatnamMechanical TestingBuilding Materials, Steel, Tiles & Miscellaneous
Price List MasterSpecific Test Test Method specification Testing charges in Rs. (Service
against which tests are Tax extra @ 12.36%) Chargesperformed extra for sample Preparation
where ever required. Samples sizegiven at side of testing charges.(Valid from
i) Density IS: 7888 – 1976 1200/
i) Density IS: 1060 (Pt-1) – 1966 600/ii) Thickness IS: 1060 (Pt-1) – 1966 600/iii) Specific gravity IS: 1060 (Pt-1) – 1966 600/
Absorption IS : 3952-1988 900/IS: 654-1992
ii) Breaking Load IS: 654-1992 2400/iii) Crushing strength IS: 3952-1988 2400/iv) Compressive strength IS: 3367-1993 2400/v) Flexural Strength IS: 3367-1993 2400/
i) Breaking load IS: 1969-1985ii) Elongation IS: 1670-1991 1200/i) Dimensional IS: 204 (part 2)-1992 p6 300/requirementsii) Finish IS: 204 (part 2)-1992 p7 300/
i) Dimensional IS: 208-1996 P6 300/requirementsii) Finish IS: 204 -1996 P7 300/
i) Dimensional IS: 363-1993 P5 300/requirementsii) Manufacturing IS: 363-1993 P6 300/
iii) Finish IS: 363-1993 P7 300/
i) Dimensional IS: 362-1991 P5 300/requirementsii) Manufacturing defects IS: 362-1991 P6 300/iii) Finish IS: 362-1991 P7 300/
i) Dimensional IS: 207-1964 P6 300/requirementsii) Manufacturing defects IS: 207-1964 P5 300/iii) Finish IS: 207-1964 P7 300/
i) Dimensional IS: 2681-1993 Pg.6 300/requirementsii) Manufacturing defects IS: 2681-1993 Pg.7 300/iii) Finish IS: 2681-1993 Pg.8 300/
i) Dimensional IS: 364-1993 Pg.5 300/requirementsii) Manufacturing defects IS: 364-1993 Pg.6 300/iii) Finish IS: 364-1993 Pg.7 300/
For scope of NABL accreditation; See NABL scope -MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Page 7 of 9
Testing charges in Rs. (ServiceTax extra @ 12.36%) Chargesextra for sample Preparationwhere ever required. Samples sizegiven at side of testing charges.(Valid from 24 Oct, 2013)
1200/-
600/-600/-600/-
900/-
2400/-2400/-2400/-2400/-
1200/-300/-
300/-
300/-
300/-
300/-
300/-
300/-
300/-
300/-300/-
300/-
300/-300/-
300/-
300/-300/-
300/-
300/-300/-
MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Laboratory : Material Testing House (India) Limited, Visakhapatnam Page 8 of 9Field : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Price List MasterSl.No Product/ Specific Test Test Method specification Testing charges in Rs. (Service
Material of Performed against which tests are Tax extra @ 12.36%) ChargesTest performed extra for sample Preparation
where ever required. Samples sizegiven at side of testing charges.(Valid from 24 Oct, 2013)
viii) Drawer/cupboard / i) Dimensions IS: 729-1979 300/-Box locks. ii) Finish IS: 729-1979 300/-
iii) Smooth working IS: 729-1979 300/-
ix) Aluminum i) Dimensional IS: 205-1992 300/-alloy/Steel/Brass butt requirements 300/-hinges iii) Finish IS: 1341-1992 300/-
x) Aluminum i) Dimensional IS: 1823-1980 300/-Floor door stoppers. requirements
iii) Finish IS: 1823-1980 300/-
39 AC Sheets i) Dimensions IS : 459 – 1992 300/-Corrugated & Non ii) Breaking load IS : 5913 – 2003 4000/-Corrugated iii) Impermeability IS : 5913 – 2003 4000/-
iv) Density IS : 5913 – 2003 600/-
40 Clay Roofing Tile i) Dimensions IS : 654 – 1992 300/- 6ii) Water absorption IS : 654 – 1992 900/- 6iii) Permeability test IS : 654 – 1992 6000/- 6iv) Breaking load IS : 654 – 1992 2400/-
41 Clay Ridge tiles i) Dimensions IS: 1464 – 1992 300/- 6ii) Breaking strength IS: 1464 – 1992 2400/ 6iii) Water absorption IS: 1464 – 1992 900/- 6
42 Clay terracing tiles i) War page IS : 2690 (part 1) 1993 600/- 6ii) Water absorption IS : 2690 (part 1) 1993 900/- 6iii) Flexural strength IS : 2690 (part 1) 1993 2400/- 6
43 SWG Pipes i) Dimensions IS : 651 – 1992ii) Crushing strength IS : 651 – 1992iii) Water absorption IS : 651 – 1992 6000/-
iv) Acid resistance IS : 651 – 1992 }v) Alkali resistance IS : 651 – 199244 Manhole Covers i) Dimensions IS:12952-2002
ii)Compressive Strengths IS:12952-2002 3500/- 1NDT (Includes Fiber)
iii) Core cutting(C.S) IS:12952-2002 6000/- 2(Includes Fiber)
45 Granite Slabs i) Water Absorption IS: 1124:1974 600/- 3Marble ii) Hardness (Schmidt) IS: 12608:1989 3500/- 3
IS:14223(Part1)1995/ iii) Compressive Strength IS:1121(part-1):1974 2400/- 6
IS:1130:1969 iv) Scratch Resistance IS:13630(part-13):1993 2400/- 3(Mohs Hardness)
IS:1708(Pt-10):1986 2400/-iv)Hardness underStatic Indentationv)Shear Strength IS:1708(Pt-11):1986 2400/-
Parallel to GrainFor scope of NABL accreditation; See NABL scope -Mechanical
The above rates will be revised time to time. Contact the lab for the latest test charges
Laboratory : Material Testing House (India) Limited, Visakhapatnam Page 9 of 9Field : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Price List MasterSl.No Product/ Specific Test Test Method specification Testing charges in Rs. (Service
Material of Performed against which tests are Tax extra @ 12.36%) ChargesTest performed extra for sample Preparation
where ever required. Samples sizegiven at side of testing charges.(Valid from 24 Oct, 2013)
vi)Tensile Strength IS:1708(Pt-12):1986 2400/-Parallel to Grainvii)Shear Strength IS:1708(Pt-13):1986 2400/-Perpendicular to Grainviii) Nail holding Strength IS:1708(Pt-15):1986 2400/-
47. Ply Wood & i) Density & Moisture Content IS: 1734(Pt.1):1983 600/- & 1200/-Pre laminated Board ii) Resistance Dry Heat IS: 1734(Pt.2):1983 1200/-IS:12893 iii)Glue shear Strength IS:1734(Pt-4):1983 2400/-
iii)Adhesion to file IS:1734(Pt-5):1983 2400/-iv)Water Resistance IS:1734(Pt-6):1983 3600/-v)PH Value IS:1734(Pt-8):1983 2400/-vi)Tensile Strength IS:1734(Pt-9):1983 2400/-vii)Compressive Strength IS:1734(Pt-10):1983 2400/-viii) Static Bending Strength IS:1734(Pt-11):1983 2400/-ix)Long Time Loading Test IS:1734(Pt-17):1983 2400/-x)Impact Resistant Test IS:1734(Pt-16):1983 2400/-xi) Nail & Screw holding IS:1734(Pt-15):1986 2400/-Strengthxii)Flexural strength 2400/-
48. NDT of Concrete i) Probable Compressive IS : 13311(part 2) : 1992 3500/- (10 ImpactsRebound Hammer Strength ( Rebound hammer) for each location)
49. Concrete Cores i) Core Cutting (with Mechanized IS:516, IS:456 & SP-24(Cylidrical) core cutting Machine) and testing
of Compressive Strengtha)70mm Dia up to 140mm height variesb)90mm Dia upto 180mm heightc)115mm Dia upto 230mm heightd)150mm Dia upto 300mm height
50. NDT of Concrete i) UPV IS : 13311(part 1) : 1992 8000/-Ultra Pulse ii)Rebound hammer IS : 13311(part 2) : 1992 3500/-Velocity(UPV)
51. Wet Mix Macadam i) Grading IS: 2386 (Pt-1)IRC-Specification ii)Heavy Compaction IS : 2720 (Pt-8)Table400-11 iii)Impact Value IS: 2386 (Pt-4) 9300/-
iv) Loss Angeles Abrasion IS: 2386 (Pt-4)v)Flakiness & Elongation Indices IS: 2386 (Pt-1)vi)CBR IS : 2720 (Pt-16)
52. Granular Sub-Base i) Grading IS: 2386 (Pt-1)IRC-Specification ii) Grain size analysis IS : 2720 (Pt-4)Table400-01 & 400-02 iii)Heavy Compaction IS : 2720 (Pt-8) 6900/-
iv) Atterberg Limita) Liquid Limit IS : 2720 (Pt-5)b) Plastic Limit IS : 2720 (Pt-5)v)CBR IS : 2720 (Pt-16)
For scope of NABL accreditation; See NABL scope -MechanicalThe above rates will be revised time to time. Contact the lab for the latest test charges
Laboratory : Material Testing House (India) Limited, Visakhapatnam Page 10 of 10
Field : Mechanical TestingGroup : Building Materials, Steel, Tiles & Miscellaneous
Price List MasterSI.No. Product/Ma
terial of Test
Specific Test Performed
Test Method specification against which tests are performed
Testing charges in Rs. (Service Tax extra @ 12.36%) Charges extra for sample Preparation where ever required. Sample size given at side of testing charges.(Valid from 24 Oct, 2013)
53 Job mix (Asphalt design mix)
i).Design mix for all Bituminous paving mixes
MS-2 18000/-
54 Concrete Admixtures(Super plasticisers)
i)Dry materialii)Ash contentiii) Relative desityiv) Chloridesv)pH
IS 9103: 1999IS 9103: 1999IS 9103: 1999IS 6925-1973IS 9103:1999
1200/-2400/-600/-2400/-600/-
55 ConcreteAdmixtures(Super plasticizer)
i)Compatibility(Marsh cone method)
6000/-
56 Bentonite Tests as per is 2911-2010
IS 2911-2010 6000/-