Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH …...RING ROAD, ODHAV, AHMEDABAD, GUJARAT ,...

S.No Discipline / Group Materials or Products tested Component, parameter orcharacteristic tested / SpecificTest Performed / Tests or typeof tests performed

Test MethodSpecificationagainst which testsare performed and /or the techniques /equipment used

Permanent Facility

1 CHEMICAL-METALLIC COATINGS& TREATMENTSOLUTIONS

Metal Coating Adhesion Test/ Pull Off Test ASTM D4541: 2017


Metal Coating Bend Test(Conical Mandrel only) ASTM D522: 2017


Metal Coating Bend Test(Conical Mandrel only) ISO 6860 : 2006


Metal Coating Coating Thickness IS 3203:1982 RA: 2016


Metal Coating Coating Thickness ASTM B 499-09: 2014


Metal Coating Drop Impact ASTM D2794-93: 2010


Metal Coating M.E.K. Test ASTM D4752-10: 2015

This is annexure to 'Certificate of Accreditation' and does not require any signature.

Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH AVENUE, VIRATNAGAR CROSS, S. P.RING ROAD, ODHAV, AHMEDABAD, GUJARAT , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number TC-6123 Page No. : 1 / 74

Validity 06/06/2019 to 05/06/2021 Last Amended on 23/08/2019




Metal Coating Mass of Zinc Coating IS: 6745:1972 RA:2016


Metal Coating Mass of Zinc Coating ASTM A 90: 2013


Metal Coating Mass of Zinc Coating BS EN ISO 1461: 2009


Metal Coating Pencil Hardness ASTM D3363-05 e2:2011


Metal Coating Salt Spray Test ASTM B117: 2016


Metal Coating Uniformity of Zn Coating Test IS 2633:1986 RA: 2016

14 CHEMICAL- METALS& ALLOYS

Cast Iron Boron ASTM E 2209: 2013


Cast Iron Cobalt ASTM E 2209: 2013









Cast Iron Copper ASTM E 2209: 2013


Nickel Alloys Carbon W/OPN/01 Issue no.:04: 2018


Nickel Alloys Iron W/OPN/01 Issue no.:04: 2018


Nickel Alloys Manganese W/OPN/01 Issue no.:04: 2018


Nickel Alloys Phosphorus W/OPN/01 Issue no.:04: 2018


Nickel Alloys Silicon W/OPN/01 Issue no.:04: 2018


Nickel Alloys Sulphur W/OPN/01 Issue no.:04: 2018


Nickel Alloys Vanadium W/OPN/01 Issue no.:04: 2018


Stainless Steel Silicon IS 9879:1998 RA: 2015


Aluminum & Aluminum Alloy Cadmium ASTM E1251a: 2017


Aluminum & Aluminum Alloy Chromium ASTM E1251a: 2017


Aluminum & Aluminum Alloy Cobalt ASTM E1251a: 2017


Aluminum & Aluminum Alloy Copper ASTM E1251a: 2017









Aluminum & Aluminum Alloy Iron ASTM E1251a: 2017


Aluminum & Aluminum Alloy Lead ASTM E1251a: 2017


Aluminum & Aluminum Alloy Magnesium ASTM E1251a: 2017


Aluminum & Aluminum Alloy Manganese ASTM E1251a: 2017


Aluminum & Aluminum Alloy Nickel ASTM E1251a: 2017


Aluminum & Aluminum Alloy Silicon ASTM E1251a: 2017


Aluminum & Aluminum Alloy Tin ASTM E1251a: 2017


Aluminum & Aluminum Alloy Titanium ASTM E1251a: 2017


Aluminum & Aluminum Alloy Vanadium ASTM E1251a: 2017


Aluminum & Aluminum Alloy Zinc ASTM E1251a: 2017


Cast Iron Aluminium IS 8811:1998 Ra: 2018


Cast Iron Aluminium ASTM E 415: 2017


Cast Iron Aluminium ASTM E 2209: 2013









Cast Iron Aluminium W/OPN/01 Issue no.:04: 2018


Cast Iron Boron IS 8811:1998 Ra: 2018


Cast Iron Boron ASTM E 415: 2017


Cast Iron Boron W/OPN/01 Issue no.:04: 2018


Cast Iron Carbon IS 8811:1998 Ra: 2018


Cast Iron Carbon ASTM E 415: 2017


Cast Iron Carbon ASTM E 2209 : 2013


Cast Iron Carbon W/OPN/01, Issueno.:03: 2016


Cast Iron Chromium IS 8811 : 1998 Ra:2018


Cast Iron Chromium ASTM E 415: 2017


Cast Iron Chromium ASTM E 2209: 2013


Cast Iron Chromium W/OPN/01 Issue no.:04: 2018


Cast Iron Cobalt IS 8811:1998 Ra: 2018









Cast Iron Cobalt ASTM E 415: 2017


Cast Iron Cobalt W/OPN/01 Issue no.:04: 2018


Cast Iron Copper ASTM E 415: 2017


Cast Iron Copper W/OPN/01 Issue no.:04: 2018


Cast Iron Copper IS 8811:1998 Ra: 2018


Cast Iron Manganese IS 8811:1998 Ra: 2018


Cast Iron Manganese ASTM E 415: 2017


Cast Iron Manganese ASTM E 2209: 2013


Cast Iron Manganese W/OPN/01 Issue no.:04: 2018


Cast Iron Molybdenum IS 8811 : 1998 Ra:2018


Cast Iron Molybdenum ASTM E 415: 2017


Cast Iron Molybdenum ASTM E 2209: 2013


Cast Iron Molybdenum W/OPN/01 Issue no.:04: 2018









Cast Iron Nickel IS 8811 : 1998 Ra:2018


Cast Iron Nickel ASTM E 415: 2017


Cast Iron Nickel ASTM E 2209: 2013


Cast Iron Nickel W/OPN/01 Issue no.:04: 2018


Cast Iron Niobium IS 8811:1998 Ra: 2018


Cast Iron Niobium ASTM E 415: 2017


Cast Iron Niobium W/OPN/01 Issue no.:04: 2018


Cast Iron Niobium ASTM E 2209: 2013


Cast Iron Phosphorous IS 8811 : 1998 Ra:2018


Cast Iron Phosphorous ASTM E 415: 2017


Cast Iron Phosphorous ASTM E 2209: 2013


Cast Iron Phosphorous W/OPN/01 Issue no.:04: 2018


Cast Iron Silicon IS 8811 : 1998 Ra:2018









Cast Iron Silicon ASTM E 415: 2017


Cast Iron Silicon ASTM E 2209: 2013


Cast Iron Silicon W/OPN/01, Issue no. 3:2016


Cast Iron Sulphur IS 8811:1998 Ra: 2018


Cast Iron Sulphur ASTM E 415: 2017


Cast Iron Sulphur W/OPN/01 Issue no.:04: 2018


Cast Iron Sulphur ASTM E 2209: 2013


Cast Iron Titanium ASTM E 2209: 2013


Cast Iron Titanium IS 8811:1998 Ra: 2018


Cast Iron Titanium ASTM E 415: 2017


Cast Iron Titanium W/OPN/01 Issue no.:04: 2018


Cast Iron Tungsten W/OPN/01 Issue no.:04: 2018


Cast Iron Tungsten ASTM E 2209: 2013









Cast Iron Tungsten ASTM E 415: 2017


Cast Iron Tungsten IS 8811:1998 Ra: 2018


Cast Iron Vanadium ASTM E 2209: 2013


Cast Iron Vanadium IS 8811:1998 Ra: 2018


Cast Iron Vanadium ASTM E 415: 2017


Cast Iron Vanadium W/OPN/01 Issue no.:04: 2018


Cast Iron Nitrogen IS 8811 : 1998 Ra:2018


Cast Iron Nitrogen ASTM E 415: 2017


Cast Iron Nitrogen ASTM E 2209: 2013


Cast Iron Nitrogen W/OPN/01 Issue no.:04: 2018


Copper / Copper (Cu) Base Iron W/OPN/01 Issue no.:04: 2018


Copper / Copper (Cu) Base Lead W/OPN/01 Issue no.:04: 2018


Copper / Copper (Cu) Base Manganese W/OPN/01 Issue no.:04: 2018









Copper / Copper (Cu) Base Nickel W/OPN/01 Issue no.:04: 2018


Copper / Copper (Cu) Base Silicon W/OPN/01 Issue no.:04: 2018


Copper / Copper (Cu) Base Tin W/OPN/01 Issue no.:04: 2018


Copper / Copper (Cu) Base Aluminium W/OPN/01 Issue no.:04: 2018


Copper / Copper (Cu) Base Antimony W/OPN/01 Issue no.:04: 2018


Copper / Copper (Cu) Base Phosphorous W/OPN/01 Issue no.:04: 2018


Copper / Copper (Cu) Base Zinc W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Aluminium ASTM E 415: 2017


Low Alloy Steel Aluminium W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Aluminium IS 8811:1998 Ra: 2018


Low Alloy Steel Boron IS 8811:1998 Ra: 2018


Low Alloy Steel Boron ASTM E 415: 2017


Low Alloy Steel Boron W/OPN/01 Issue no.:04: 2018









Low Alloy Steel Carbon IS 8811:1998 Ra: 2018


Low Alloy Steel Carbon ASTM E 415: 2017


Low Alloy Steel Carbon W/OPN/01, Issueno.:03: 2016


Low Alloy Steel Chromium IS 8811 : 1998 Ra:2018


Low Alloy Steel Chromium ASTM E 415: 2017


Low Alloy Steel Chromium W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Cobalt IS 8811:1998 Ra: 2018


Low Alloy Steel Cobalt ASTM E 415: 2017


Low Alloy Steel Cobalt W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Copper IS 8811:1998 Ra: 2018


Low Alloy Steel Copper ASTM E 415: 2017


Low Alloy Steel Copper W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Manganese IS 8811:1998 Ra: 2018









Low Alloy Steel Manganese ASTM E 415: 2017


Low Alloy Steel Manganese W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Molybdenum IS 8811 : 1998 Ra:2018


Low Alloy Steel Molybdenum ASTM E 415: 2017


Low Alloy Steel Molybdenum W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Nickel IS 8811 : 1998 Ra:2018


Low Alloy Steel Nickel ASTM E 415: 2017


Low Alloy Steel Nickel W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Niobium IS 8811:1998 Ra: 2018


Low Alloy Steel Niobium ASTM E 415: 2017


Low Alloy Steel Niobium W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Phosphorous IS 8811 : 1998 Ra:2018


Low Alloy Steel Phosphorous W/OPN/01 Issue no.:04: 2018









Low Alloy Steel Phosphorous ASTM E 415: 2017:2017


Low Alloy Steel Silicon IS 8811 : 1998 Ra:2018


Low Alloy Steel Silicon ASTM E 415: 2017


Low Alloy Steel Silicon W/OPN/01, Issue no. 3:2016


Low Alloy Steel Sulphur ASTM E 415: 2017


Low Alloy Steel Sulphur W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Sulphur IS 8811:1998 Ra: 2018


Low Alloy Steel Titanium IS 8811:1998 Ra: 2018


Low Alloy Steel Titanium ASTM E 415: 2017


Low Alloy Steel Titanium W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Tungsten W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Tungsten ASTM E 415: 2017


Low Alloy Steel Tungsten IS 8811:1998 Ra: 2018









Low Alloy Steel Vanadium ASTM E 415: 2017


Low Alloy Steel Vanadium W/OPN/01 Issue no.:04: 2018


Low Alloy Steel Vanadium IS 8811:1998 Ra: 2018


Low Alloy Steel Nitrogen IS 8811:1998 Ra: 2018


Low Alloy Steel Nitrogen ASTM E 415: 2017


Low Alloy Steel Nitrogen W/OPN/01 Issue no.:04: 2018


Mn Steel Aluminium ASTM E 2209: 2013


Mn Steel Aluminium W/OPN/01 Issue no.:04: 2018


Mn Steel Boron ASTM E 2209: 2013


Mn Steel Boron W/OPN/01 Issue no.:04: 2018


Mn Steel Carbon ASTM E 2209: 2013


Mn Steel Carbon W/OPN/01 Issue no.:04: 2018


Mn Steel Chromium ASTM E 2209: 2013









Mn Steel Chromium W/OPN/01 Issue no.:04: 2018


Mn Steel Cobalt ASTM E 2209: 2013


Mn Steel Cobalt W/OPN/01 Issue no.:04: 2018


Mn Steel Copper ASTM E 2209: 2013


Mn Steel Copper W/OPN/01 Issue no.:04: 2018


Mn Steel Manganese ASTM E 2209: 2013


Mn Steel Manganese W/OPN/01 Issue no.:04: 2018


Mn Steel Molybdenum ASTM E 2209: 2013


Mn Steel Molybdenum W/OPN/01 Issue no.:04: 2018


Mn Steel Nickel ASTM E 2209: 2013


Mn Steel Nickel W/OPN/01 Issue no.:04: 2018


Mn Steel Niobium ASTM E 2209: 2013


Mn Steel Niobium W/OPN/01 Issue no.:04: 2018









Mn Steel Nitrogen ASTM E 2209: 2013


Mn Steel Phosphorous ASTM E 2209: 2013


Mn Steel Phosphorous W/OPN/01 Issue no.:04: 2018


Mn Steel Silicon ASTM E 2209: 2013


Mn Steel Silicon W/OPN/01 Issue no.:04: 2018


Mn Steel Sulphur ASTM E 2209: 2013


Mn Steel Sulphur W/OPN/01 Issue no.:04: 2018


Mn Steel Titanium ASTM E 2209: 2013


Mn Steel Titanium W/OPN/01 Issu no.: 04:2018


Mn Steel Vanadium ASTM E 2209: 2013


Mn Steel Vanadium W/OPN/01 Issue no.:04: 2018


Mn Steel Nitrogen W/OPN/01 Issu no.: 04:2018


Mn Steel Tungsten W/OPN/01 Issue no.:04: 2018









Mn Steel Tungsten ASTM E 2209: 2013


Nickel Alloys Aluminium W/OPN/01 Issue no.:04: 2018


Nickel Alloys Boron W/OPN/01 Issue no.:04: 2018


Nickel Alloys Chromium W/OPN/01 Issue no.:04: 2018


Nickel Alloys Cobalt W/OPN/01 Issue no.:04: 2018


Nickel Alloys Copper W/OPN/01 Issue no.:04: 2018


Nickel Alloys Molybdenum W/OPN/01 Issue no.:04: 2018


Nickel Alloys Niobium W/OPN/01 Issue no.:04: 2018


Nickel Alloys Titanium W/OPN/01 Issue no.:04: 2018


Nickel Alloys Tungsten W/OPN/01 Issue no.:04: 2018


Nickel Alloys Tantalum W/OPN/01 Issue no.:04: 2018


Positive Material Identification Segregation of mix up Alloys(Fe,Cu, Al & Ni base alloys)

ASTM E 1916: 2011


Positive Material Identification Segregation of mix up Alloys (Fe,Cu, Al & Ni base alloys)

W/OPN/12 IssueNo.02: 2016









Stainless Steel Aluminium ASTM E1086: 2014


Stainless Steel Aluminium IS 9879:1998 RA: 2015


Stainless Steel Aluminium W/OPN/01 Issue no.:04: 2018


Stainless Steel Boron ASTM E1086: 2014


Stainless Steel Boron IS 9879:1998 RA: 2015


Stainless Steel Boron W/OPN/01 Issue no.:04: 2018


Stainless Steel Carbon IS 9879:1998 RA: 2015


Stainless Steel Carbon ASTM E1086 : 2014


Stainless Steel Carbon W/OPN/01 Issue no.:04: 2018


Stainless Steel Chromium IS 9879 : 1998 RA:2015


Stainless Steel Chromium ASTM E1086 : 2014


Stainless Steel Chromium W/OPN/01 Issue no.:04: 2018


Stainless Steel Cobalt IS 9879 : 1998: 2015









Stainless Steel Cobalt ASTM E1086: 2014


Stainless Steel Cobalt W/OPN/01 Issue no.:04: 2018


Stainless Steel Copper IS 9879 : 1998 RA:2015


Stainless Steel Copper ASTM E1086 : 2014


Stainless Steel Copper W/OPN/01 Issue no.:04: 2018


Stainless Steel Manganese IS 9879:1998 RA: 2015


Stainless Steel Manganese ASTM E1086 : 2014


Stainless Steel Manganese W/OPN/01 Issue no.:04: 2018


Stainless Steel Molybdenum IS 9879 : 1998 RA:2015


Stainless Steel Molybdenum ASTM E1086 : 2014


Stainless Steel Molybdenum W/OPN/01 Issue no.:04: 2018


Stainless Steel Nickel IS 9879 : 1998 RA:2015


Stainless Steel Nickel ASTM E1086 : 2014









Stainless Steel Nickel W/OPN/01 Issue no.:04: 2018


Stainless Steel Niobium W/OPN/01 Issue no.:04: 2018


Stainless Steel Niobium IS 9879 : 1998 RA:2015


Stainless Steel Niobium ASTM E1086: 2014


Stainless Steel Nitrogen IS 9879 : 1998 RA:2015


Stainless Steel Nitrogen ASTM E1086: 2014


Stainless Steel Nitrogen W/OPN/01 Issue no.:04: 2018


Stainless Steel Phosphorous IS 9879 : 1998 RA:2015


Stainless Steel Phosphorous ASTM E1086 : 2014


Stainless Steel Phosphorous W/OPN/01 Issue no.:04: 2018


Stainless Steel Silicon ASTM E1086 : 2014


Stainless Steel Silicon W/OPN/01 Issue no.:04: 2018


Stainless Steel Sulphur IS 9879:1998 RA: 2015









Stainless Steel Sulphur ASTM E1086 : 2014


Stainless Steel Sulphur W/OPN/01 Issue no.:04: 2018


Stainless Steel Titanium W/OPN/01 Issue no.:04: 2018


Stainless Steel Titanium ASTM E1086: 2014


Stainless Steel Titanium IS 9879:1998 RA: 2015


Stainless Steel Tungsten IS 9879:1998 RA: 2015


Stainless Steel Tungsten ASTM E1086: 2014


Stainless Steel Tungsten W/OPN/01 Issue no.:04: 2018


Stainless Steel Vanadium IS 9879:1998 RA: 2015


Stainless Steel Vanadium ASTM E1086: 2014


Stainless Steel Vanadium W/OPN/01 Issue no.:04: 2018


Tool Steel Aluminium ASTM E 2209 : 2013


Tool Steel Aluminium W/OPN/01 Issueno.:04: 2018









Tool Steel Aluminium IS 8811 : 1998 Ra:2018


Tool Steel Aluminium ASTM E 415: 2017


Tool Steel Boron IS 8811:1998 Ra: 2018


Tool Steel Boron ASTM E 415: 2017


Tool Steel Boron W/OPN/01, Issue no.:04: 2018


Tool Steel Boron ASTM E 2209: 2013


Tool Steel Carbon W/OPN/01 Issueno.:04: 2018


Tool Steel Carbon IS 8811 : 1998 Ra:2018


Tool Steel Carbon ASTM E 415 : 2017


Tool Steel Carbon ASTM E 2209: 2013


Tool Steel Chromium IS 8811 : 1998 Ra:2018


Tool Steel Chromium ASTM E 415: 2017


Tool Steel Chromium W/OPN/01 Issueno.:04: 2018









Tool Steel Cobalt ASTM E 2209: 2013


Tool Steel Cobalt IS 8811 : 1998 Ra:2018


Tool Steel Cobalt ASTM E 415: 2017


Tool Steel Cobalt W/OPN/01, Issueno.:04: 2018


Tool Steel Copper ASTM E 2209: 2013


Tool Steel Copper IS 8811 : 1998 Ra:2018


Tool Steel Copper ASTM E 415: 2017


Tool Steel Copper W/OPN/01 Issueno.:04: 2018


Tool Steel Manganese IS 8811 : 1998 Ra :2018


Tool Steel Manganese ASTM E 415: 2017


Tool Steel Manganese ASTM E 2209: 2013


Tool Steel Manganese W/OPN/01 Issueno.:04: 2018


Tool Steel Molybdenum IS 8811 : 1998 Ra:2018









Tool Steel Molybdenum ASTM E 415: 2017


Tool Steel Molybdenum ASTM E 2209: 2013


Tool Steel Molybdenum W/OPN/01 Issueno.:04: 2018


Tool Steel Nickel IS 8811 : 1998 Ra:2018


Tool Steel Nickel ASTM E 415: 2017


Tool Steel Nickel ASTM E 2209 : 2013


Tool Steel Nickel W/OPN/01 Issueno.:04: 2018


Tool Steel Niobium ASTM E 2209: 2013


Tool Steel Niobium IS 8811 : 1998 Ra:2018


Tool Steel Niobium ASTM E 415: 2017


Tool Steel Niobium W/OPN/01, Issueno.:04: 2018


Tool Steel Phosphorous IS 8811 : 1998 Ra:2018


Tool Steel Phosphorous ASTM E 415: 2017









Tool Steel Phosphorous ASTM E 2209: 2013


Tool Steel Phosphorous W/OPN/01 Issueno.:04: 2018


Tool Steel Silicon IS 8811 : 1998 Ra:2018


Tool Steel Silicon ASTM E 415: 2017


Tool Steel Silicon ASTM E 2209: 2013


Tool Steel Silicon W/OPN/01 Issueno.:04: 2018


Tool Steel Sulphur IS 8811 : 1998 Ra:2018


Tool Steel Sulphur ASTM E 415: 2017


Tool Steel Sulphur W/OPN/01 Issueno.:04: 2018


Tool Steel Sulphur ASTM E 2209: 2013


Tool Steel Titanium ASTM E 2209: 2013


Tool Steel Titanium IS 8811 : 1998 Ra:2018


Tool Steel Titanium ASTM E 415 : 2017









Tool Steel Titanium W/OPN/01 Issueno.:04: 2018


Tool Steel Tungsten IS 8811 : 1998 Ra:2018


Tool Steel Tungsten ASTM E 2209: 2013


Tool Steel Tungsten ASTM E 415: 2017


Tool Steel Tungsten W/OPN/01, Issueno.:04: 2018


Tool Steel Vanadium ASTM E 2209: 2013


Tool Steel Vanadium IS 8811:1998 Ra: 2018


Tool Steel Vanadium ASTM E 415: 2017


Tool Steel Vanadium W/OPN/01, Issueno.:04: 2018


Tool Steel Chromium ASTM E 2209: 2013


Tool steel Nitrogen ASTM E 2209: 2013


Tool Steel Nitrogen W/OPN/01 Issueno.:04: 2018


Tool Steel Nitrogen IS 8811 : 1998 Ra:2018









Tool Steel Nitrogen ASTM E 415: 2017

329 MECHANICAL-BUILDINGSMATERIALS

Coarse Aggregate Abrasion value (by Los angeles) IS 2386 (Part–4) : 1963RA : 2016


Coarse Aggregate Bulk Density IS 2386 (Part–3) : 1963RA : 2016


Coarse Aggregate Sieve analysis / gradation (SieveSize: 80 mm,63 mm,50 mm,40mm,31.5mm,25 mm,20 mm,16mm,12.5 mm,10 mm,6.3 mm,4.75mm)

IS 2386 (Part–1) : 1963RA: 2016


Coarse Aggregate Water absorption IS 2386 (Part–3) : 1963RA: 2016


Fine Aggregate Bulk Density IS 2386 (Part–3) : 1963RA : 2016


Fine Aggregate Specific gravity IS 2386 (Part–3) : 1963RA : 2016


Fine Aggregate Water absorption IS 2386 (Part–3) : 1963RA: 2016


AAC Block Compressive Strength IS 6441 (Part 5) : 1972Ra: 2017









AAC Block Dimension - H IS 2185 (Part 3) :1984RA : 2015


AAC Block Dimension - L IS 2185 (Part 3) :1984RA: 2015


AAC Block Dimension - W IS 2185 (Part 3) 1984RA: 2015


AAC Block Dry Density IS 6441 (Part 1) : 1972RA : 2017


AAC Block Moisture Content IS 6441 (Part 1) : 1972RA: 2017


Bricks Compressive strength IS 3495 (Part–1) :1992: 2016


Bricks Dimensions - H IS 1077 : 1992 RA:2016


Bricks Dimensions - L IS 1077 : 1992 RA:2016


Bricks Dimensions - W IS 1077 : 1992 RA:2016









Bricks Efflorescence IS 3495 (Part–3) :1992: 2016


Bricks Water absorption IS 3495 (Part–2) :1992: 2016


Cement Compressive strength IS 4031 (Part–6) : 1988RA: 2014


Cement Consistency IS 4031 (Part–4): 1988RA: 2016


Cement Final setting time IS 4031 (Part–5) : 1988RA : 2016


Cement Fineness by blaine air permeability IS 4031 (Part–2) : 1999RA: 2013


Cement Fineness by dry sieving IS 4031: 1996,Part–1,Clause No.5 : 2016


Cement Initial setting time IS 4031 (Part–5) : 1988RA: 2016


Cement Soundness by Le–chatelier’smethods

IS 4031 (Part–3) :1988: 2013









Coarse Aggregate Crushing value IS 2386 (Part–4) : 1963RA: 2016


Coarse Aggregate Elongation index IS 2386 (Part–1): 1963RA: 2016


Coarse Aggregate Flakiness index IS 2386 (Part–1) 1963RA: 2016


Coarse Aggregate Impact value IS 2386 (Part–4) : 1963RA: 2016


Coarse Aggregate Specific gravity IS 2386 (Part–3) : 1963RA: 2016


Concrete Compressive strength IS 516 : 1959: 2013


Concrete Flexural Strength of Beam IS 516 : 1959: 2013


Fine Aggregate Fineness modulus by gradation IS 2386 (Part–1) : 1963RA: 2016

363 MECHANICAL-MECHANICALPROPERTIES OFMETALS

Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1: 2016











Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM E 18: 2019






Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586,Part-1: 2018




Ferrous & Non Ferrous Product Rockwell Hardness Test ASTM A 370: 2017













Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586, Part–1: 2018








Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1 :: 2016









Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586 Part–1: 2018






Ferrous & Non Ferrous Product Vickers Hardness Test ASTM E384: 2017




Ferrous & Non Ferrous Product Vickers Hardness Test IS 1501,Part-1:2013Ra: 2018


Ferrous & Non Ferrous Product Vickers Hardness Test IS 1501,Part-1:2013Ra: 2018









Ferrous & Non Ferrous Product Vickers Hardness Test ISO 6507-1: 2018




Ferrous & Non Ferrous Product Vickers Hardness Test IS 1501 Part-1:2013Ra: 2018



















Fillet Weld Joints, Ferrous & NonFerrous Product

Fracture Test IS 3600 Part-8Ra.1985: 2019



Fracture Test IS 7310 Part-1:1974Ra: 2011



Fracture Test AWS D1.1: 2015



Fracture Test API 1104: 2016


Steel Fastners STUDS / BOLTS Size M4 to M39(Tensile Breaking Load)

IS 1608 Part-1: 2018


Welded Coupon Plate andWeldments

Vickers Hardness Test ASTM E384: 2017













Vickers Hardness Test EN ISO 15614-1: 2017






Vickers Hardness Test BS EN ISO 9015-1:2011



Vickers Hardness Test BS EN ISO 9015-1:2011


Ferrous & Non Ferrous Product % Elongation IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product % Elongation ASTM A 370: 2017









Ferrous & Non Ferrous Product % Elongation ISO 6892(P1) : 2016


Ferrous & Non Ferrous Product % Elongation ASTM B 557: 2015


Ferrous & Non Ferrous Product % Elongation IS 16172: 2014


Ferrous & Non Ferrous Product % Elongation IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product % Elongation ASTM A 370: 2017


Ferrous & Non Ferrous Product % Elongation ISO 6892(P1): 2016


Ferrous & Non Ferrous Product % Elongation ASTM B 557: 2015









Ferrous & Non Ferrous Product % Elongation IS 16172: 2014


Ferrous & Non Ferrous Product Bend Test IS 1599:2012 RA :2015


Ferrous & Non Ferrous Product Bend Test IS 1786:2008 RA: 2013


Ferrous & Non Ferrous Product Bend Test ASTM A 370: 2017






Ferrous & Non Ferrous Product Bend Test ASTM A 370: 2017









Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ASTM A 370: 2017


Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ISO 6892(P1): 2016


Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ASTM B 557: 2015


Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL IS 16172: 2014


Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ASTM A 370 : 2017









Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ISO 6892(P1): 2016


Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL ASTM B 557: 2015


Ferrous & Non Ferrous Product Proof Stress / 0.5% EUL IS 16172: 2014


Ferrous & Non Ferrous Product Reduction Area % IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product Reduction Area % ASTM A 370: 2017


Ferrous & Non Ferrous Product Reduction Area % ISO 6892(P1): 2016


Ferrous & Non Ferrous Product Reduction Area % ASTM B 557: 2015









Ferrous & Non Ferrous Product Reduction Area % IS 16172: 2014


Ferrous & Non Ferrous Product Reduction Area % IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product Reduction Area % ASTM A 370: 2017


Ferrous & Non Ferrous Product Reduction Area % ISO 6892(P1): 2016


Ferrous & Non Ferrous Product Reduction Area % ASTM B 557: 2015


Ferrous & Non Ferrous Product Reduction Area % IS 16172: 2014

















Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1 : 2016

















Ferrous & Non Ferrous Product Rockwell Hardness Test IS 1586 Part–1: 2018




Ferrous & Non Ferrous Product Rockwell Hardness Test ISO 6508-1 : 2016






Ferrous & Non Ferrous Product Steel Tube – Flattening Test IS 2328: 2018









Ferrous & Non Ferrous Product Steel Tube – Flattening Test ASTM A 370: 2017


Ferrous & Non Ferrous Product Steel Tube – Flattening Test IS 2328: 2018


Ferrous & Non Ferrous Product Steel Tube – Flattening Test ASTM A 370: 2017


Ferrous & Non Ferrous Product Ultimate Tensile Strenght IS 16172: 2014


Ferrous & Non Ferrous Product Ultimate Tensile Strength IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product Ultimate Tensile Strength ASTM A370: 2017


Ferrous & Non Ferrous Product Ultimate Tensile Strength ISO 6892 Part 1: 2016









Ferrous & Non Ferrous Product Ultimate Tensile Strength ASTM B557: 2015


Ferrous & Non Ferrous Product Ultimate Tensile Strength IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product Ultimate Tensile Strength ASTM A 370: 2017


Ferrous & Non Ferrous Product Ultimate Tensile Strength ISO 6892(P1): 2016


Ferrous & Non Ferrous Product Ultimate Tensile Strength ASTM B 557: 2015


Ferrous & Non Ferrous Product Ultimate Tensile Strength IS 16172: 2014













Ferrous & Non Ferrous Product Vickers Hardness Test ISO 6507-1 : 2018






Ferrous & Non Ferrous Product Vickers Hardness Test ISO 6507-1 : 2018


Ferrous & Non Ferrous Product Yield Stress IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product Yield Stress ISO 6892 PART 1:2016









Ferrous & Non Ferrous Product Yield Stress ASTM B557: 2015


Ferrous & Non Ferrous Product Yield Stress IS 16172: 2014


Ferrous & Non Ferrous Product Yield Stress IS 1608 Part-1: 2018


Ferrous & Non Ferrous Product Yield Stress ASTM A 370: 2017


Ferrous & Non Ferrous Product Yield Stress ISO 6892(P1): 2016


Ferrous & Non Ferrous Product Yield Stress ASTM B 557: 2015


Ferrous & Non Ferrous Product Yield Stress IS 16172: 2014









Ferrous & Non Ferrous Product Yield Stress/0.2% proof stress ASTM A370: 2017


Ferrous Product Through Thickness Test RA ASTM A770-03 e1:2012


Ferrous Product Through Thickness Test RA BS EN 10164: 2018



Fracture Test ASME Sec.IX: 2017


Reinforced steel and Steel Section Weight/meter IS 808 : 1989 RA: 2014


Reinforced steel and Steel Section Weight/meter IS 1786:2008 RA: 2013


Steel Chisel Test ISO 14273: 2016











Steel Chisel Test BS EN ISO 15614:2014




Steel Chisel Test ASME Section-IX: 2017


Steel Hot Tensile Test upto 650°C%Elongation

ASTM E21: 2017


Steel Hot Tensile Test upto 650°C%Elongation

ISO 6892(2): 2018


Steel Hot Tensile Test upto 650°CReduction Area %

ASTM E21: 2017









Steel Hot Tensile Test upto 650°CReduction Area %

ISO 6892(2): 2018


Steel Hot Tensile Test upto 650°CUltimate Tensile Strength

ASTM E21: 2017


Steel Hot Tensile Test upto 650°CUltimate Tensile Strength

ISO 6892(2): 2018


Steel Hot Tensile Test upto 650 °CYieldStress

ASTM E21: 2017


Steel Hot Tensile Test upto 650 °CYieldStress

ISO 6892(2): 2018


Steel Peel Test ASME Section-IX: 2017


Steel Peel Test ISO 14273: 2016











Steel Peel Test BS EN ISO 15614:2014




Steel Shear Test ASME Section-IX: 2017


Steel Shear Test ISO 14273: 2016




Steel Shear Test BS EN ISO 15614:2014











Steel Tube & Tube Sheet Joints (Shearloading)

ASME SEC-VII-Div1(Non mandatoryAppendices Sec A–3):2017


Steel and Weld Product Charpy ”V” Notch Impact Test [Ambient to (-) 196°C ]

ISO 148-1: 2016



ASTM E 23: 2016



ASTM A 370: 2017



IS 1757, Part–1 : 2014


Steel Fastners Nuts Size M4 to M39 (Proof loadtest)

ASTM A 370: 2017









Steel Fastners Nuts Size M4 to M39 (Proof LoadTest)

IS 1367 (Part–6):1994RA : 2015


Steel Fastners STUDS / BOLTS Size M4 to M39(Proof Load test)

IS:1367(Part-3): 2017


Steel Fastners STUDS / BOLTS Size M4 to M39(Proof Load test)

ASTM A 370: 2017


Steel Fastners STUDS / BOLTS Size M4 to M39(Proof load test)

ISO 3506-1: 2009



ISO 3506-1: 2009



IS:1367(Part-3): 2017


Steel Fastners STUDS / BOLTS Size M4 to M39(Wedge Load test )

IS 1367 Part-1: 2017










ASTM A 370: 2017



ISO 3506-1: 2009


Steel Fastners STUDS / BOLTS Size M4 to M39(Wedge Load test)

IS:1367(Part-3),: 2017


Steel Fastners STUDS / BOLTS Size M4 toM39(Tensile Breaking Load)

ASTM A 370: 2017


Steel Fastners Nuts M4 to M39 (Proof Load Test) ISO 3506-2: 2009


Steel tubes / Sockets Flaring Test / Drift Expansion Test IS 2335 : 2005 RA:2017


Steel tubes / Sockets Flaring Test / Drift Expansion Test EN ISO 8493: 2004









Steel tubes / Sockets Flaring Test / Drift Expansion Test ASTM A 370: 2017


Steel tubes / Sockets Flaring Test / Drift Expansion Test ASTM A 1016: 2018


Steel tubes / Sockets Ring Tensile Test ISO 8496: 2013


Steel wire For Prestressed Concrete 1 % Extension IS 14268: 2017


Steel wire For Prestressed Concrete Breaking Load IS 14268 : 2017


Steel wire For Prestressed Concrete Elongation IS 14268: 2017


Steel wire For Prestressed Concrete Lay Length IS 14268: 2017









Steel wire For Prestressed Concrete Modulus Elasticity IS 14268: 2017


Steel wire For Prestressed Concrete Nominal Diameter IS 14268: 2017


Steel wire For Prestressed Concrete Weight per Meter IS 14268: 2017


TMT Reinforced Steel bar Re–bend IS 1786 : 2008 RA:2013


TMT Reinforced Steel bar Re–bend IS 1599 : 2012 RA:2017



Transverse and Longitudinal BendTest

ASME Sec.IX: 2017




IS 3600 Part-5: 2018











ISO 5173: 2009




ISO 5173: 2009




AWS D1.1: 2015




API 1104 : 2016









Vickers Hardness Test ASTM E384, EN ISO15614-1, BS EN ISO9015-1 : 2011









Welded Steel Coupon Plate andWeldments

Nick Break test API 1104: 2016



Nick Break test IS 3600(8):1985 RA:2019



Transverse Tensile Strength API 1104: 2016



Transverse Tensile Strength ASME Sec.IX: 2017



Transverse Tensile Strength ISO 4136 (BS EN):2012



Transverse Tensile Strength IS 3600 Part-3: 2018



Transverse Tensile Strength IS 3600 Part-4:1984Ra: 2011










Transverse Tensile Strength DIN EN ISO 5178:2015



Transverse Tensile Strength AWS D 1.1: 2015

562 MECHANICAL-METALLOGRAPHYTEST

CORROSION TEST AusteniticStainless Steel

Inter Granular Corrosion - A Microstructure Method-A ASTM A262: 2015



Inter Granular Corrosion - F Microstructure Method-F ASTM A262: 2015 :2015


Ferritic Stainless Steel Inter Granular Corrosion - X Weight loss - X ASTMA763: 2015


Ferritic Stainless Steel Inter Granular Corrosion - Y Weight loss - Y ASTMA763: 2015


Nickel base and chromium bearingalloys

Corrosion test - A Method A, ASTM G28-02: 2015


Nickel base and chromium bearingalloys

Corrosion test - B Method B ASTM G28-02: 2015


Case hardened steel Case depth measurement IS 6416-1988 RA: 2018









Cast iron Distribution IS 7754 : 1975 RA :2018


Cast iron Distribution ASTM E1245-03: 2016


Cast iron Graphite Type IS 7754:1975 RA: 2018


Cast iron Graphite Type ASTM E1245-03: 2016


Cast iron Nodularity IS 7754:1975 RA: 2018


Cast iron Nodularity ASTM E1245-03: 2016


Cast iron Nodule count IS 7754:1975 RA: 2018


Cast iron Nodule count ASTM E1245-03: 2016


Cast iron Size IS 7754:1975 RA: 2018









Cast iron Size ASTM E1245-03: 2016


Copper Alloy Stress Corrosion Cracking inCopper Alloys

ASTM B858: 2018


Copper Alloy Stress Corrosion Cracking inCopper Alloys

NACE TM 0177: 2016



Inter Granular Corrosion - C Microstructure Method-C ASTM A262: 2015



Inter Granular Corrosion - E Microstructure Method-E ASTM A262: 2015


CORROSION TESTAusteniticStainless Steel

Inter Granular Corrosion - B Microstructure Method-B ASTM A262: 2015


Duplex Stainless Steel Crevice Pitting Corrosion test ASTM G48-11 : 2015


Duplex Stainless Steel Detection of inter Productlic phasesMethod C

ASTM A 923: 2014


Duplex Stainless Steel Detection of inter ProductlicphasesMethod A

ASTM A 923: 2014









Ferritic / austenitic and duplexStainless Steel

IGC Test Method-C IS 10461(Part-2):1994RA: 2016



Huey Test ISO 3651(Part 1): 1998



Huey Test IS 10461(Part-1):1994RA: 2016



IGC Test Method-A (MonypennyStrauss Test)

IS 10461(Part-2):1994RA: 2016



IGC Test Method-A (MonypennyStrauss Test)

ISO 3651(Part 2): 1998



IGC Test Method-B IS 10461(Part-2):1994RA: 2016



IGC Test Method-B ISO 3651(Part 2): 1998



IGC Test Method-C ISO 3651(Part 2): 1998


Ferritic Stainless Steel Inter Granular Corrosion Microstructure Method-W, Z ASTM A763:2015









Ferrous and Non-Ferrous Product Grain Size ASTM E112: 2013


Ferrous and Non-Ferrous Product Grain Size IS 4748:2009 Ra: 2017


Ferrous and Non-Ferrous Product Grain Size ISO 643: 2012


Ferrous and Non-Ferrous Product Grain Size ASTM E112: 2013


Ferrous and Non-Ferrous Product Grain Size IS 4748:2009 Ra: 2017


Ferrous and Non-Ferrous Product Grain Size ISO 643: 2012


Ferrous and Non-Ferrous Product Macro Examination IS 7307(1):1974 RA:2019


Ferrous and Non-Ferrous Product Macro Examination ASME Sec.IX: 2017











Ferrous and Non-Ferrous Product Macro Examination BS EN ISO 17639:2013




Ferrous and Non-Ferrous Product Macro Examination ASME Sec.IX: 2017




Ferrous and Non-Ferrous Product Macro Examination BS EN ISO 17639:2013


Ferrous and Non-Ferrous Product Microstructure ASM Handbook Sec.IX: 2004


Ferrous and Non-Ferrous Product Microstructure ASTM E407-2007 e1:2015


Ferrous and Non-Ferrous Product Microstructure EN 287-1: 2011


Ferrous and Non-Ferrous Product Microstructure ASM Handbook Sec.IX: 2004









Ferrous and Non-Ferrous Product Microstructure ASTM E407-2007 e1:2015


Ferrous and Non-Ferrous Product Microstructure EN 287-1: 2011


Ferrous and Non-Ferrous Product Microstructure-Iron and Iron Alloy IS 7739 Part-5:1976Ra: 2018


Ferrous and Non-Ferrous Product Microstructure- Nickel and NickelAlloy

IS 7739 Part-8:1975Ra: 2018


Ferrous and Non-Ferrous Product Microstructure-Alluminium andAlluminium alloy

IS 7739 Part-3:1975Ra: 2018


Ferrous and Non-Ferrous Product Microstructure-Copper and CopperAlloy

IS 7739 Part-4:1975Ra: 2018


Ferrous Metal & Alloys Hydrogen Induced Cracking NACE TM 0284: 2016


Ferrous Metal & Alloys Hydrogen Induced Cracking NACE TM 0284: 2016


Ferrous Metals & Alloys Chloride Stress Corrosion CrackingTest

ASTM G 36: 2018









Ferrous Metals & Alloys Chloride Stress Corrosion CrackingTest

ASTM G36: 2018


Stainless steel Inclusion or Second-PhaseConstituent Content of Metals byAutomatic Image Analysis

ASTM E1245: 2016


Stainless steel Volume Fraction by SystematicManual Point Count

ASTM E 562: 2011


Steel Depth of decarburization IS 6396 : 2000 RA:2018


Steel Inclusion rating IS 4163:2004 RA :2017


Steel Inclusion rating ASTM E 45 : 2018


Steel Inclusion rating DIN 50602 : 1985 RA:2009


Super Duplex Stainless Steel &Duplex Stainless Steel, StainlessSteel, Ferrous Metals and Its Alloys

Sulphide Stress Cracking & StressCorrosion Cracking -Method A,B,C

NACE TM 0177: 2016


Super Duplex Stainless Steel &Duplex Stainless Steel, StainlessSteel, Ferrous Metals and Its Alloys

Sulphide Stress Cracking & StressCorrosion Cracking -Method A,B,C

W/OPN/48 Issue. No.1: 2018








632 MECHANICAL-PLASTICS ANDPLASTIC PRODUCTS

Plastic and Plastic Products Melt Flow Index 13360 Part 4 Sec-1 Ra.2000: 2013


Plastic and Plastic Products Water Absorption IS 13360 Part 8 Sec 1Ra.1997: 2013


Plastic and Plastic Products Ash Content & Sulphate AshContent

IS 12235 (Part-17):2004 Ra: 2014


Plastic and Plastic Products Compression test ASTM D4280: 2015


Plastic and Plastic Products Density & Specific Gravity ASTM D792: 2013


Plastic and Plastic Products Density & Specific Gravity IS 12235 Part-14:2004Ra: 2014


Plastic and Plastic Products DimensionsNominal diameter/Outside diameter

IS 12235(Part-1):2004Ra: 2014


Plastic and Plastic Products Elongation, Elongation at Break,Elongation at Yield

ASTM D638: 2014


Plastic and Plastic Products Flattening Test IS 12235 (Part19):2004 Ra: 2014









Plastic and Plastic Products Flexural Strength ASTM D4280: 2015


Plastic and Plastic Products High Temp. Test IS 12235(Part-16):2004Ra: 2014


Plastic and Plastic Products Izod Impact ASTM D256-e1: 2010


Plastic and Plastic Products Longitudinal Reversion IS 12235(Part-5):2004Ra: 2014


Plastic and Plastic Products Melt Flow Index ASTM D1238: 2013


Plastic and Plastic Products Resistance to Dichloromethane IS 12235(Part-11):2004Ra: 2014


Plastic and Plastic Products Resistance to Sulphuric Acid IS 12235(Part-7):2004Ra: 2014


Plastic and Plastic Products Stress Relief Test IS 12235(Part-6): 2004


Plastic and Plastic Products Tensile Strength ASTM D638: 2014









Plastic and Plastic Products Tensile Strength IS 12235 Part-13:2004Ra: 2014


Plastic and Plastic Products Wall thickness/ ThicknessVisualappearance / Workmanship

IS 12235(Part-1):2004Ra: 2014


Plastic and Plastic Products Water Absorption ASTM D570-98: 2010

653 MECHANICAL-RUBBER ANDRUBBER PRODUCTS

Rubber and Rubber Products Hardness (Shore A) AST MD2240: 2015


Rubber and Rubber Products Hardness (Shore A) IS 3400 (Part 23):2002RA: 2017


Rubber and Rubber Products Hardness (Shore A) ISO 48 Part 4: 2018


Rubber and Rubber Products Hardness (Shore D) ASTM D2240: 2015


Rubber and Rubber Products Hardness (Shore D) IS 3400 (Part 23):2002RA: 2017


Rubber and Rubber Products Hardness (Shore D) ISO 48 Part 4: 2018









Rubber and Rubber Products Density IS 3400 (Part 9) : 2014


Rubber and Rubber Products Density IS 3400 (Part 9) : 2014


Rubber and Rubber Products Elongation at Break IS 3400(Part 1):2012Ra: 2017


Rubber and Rubber Products Elongation at Break ISO 37: 2011


Rubber and Rubber Products Elongation at Break ASTM D 412 : 2016


Rubber and Rubber Products Elongation at Break IS 3400(Part 1):2012:2017


Rubber and Rubber Products Elongation at Break ISO 37: 2011


Rubber and Rubber Products Elongation at Break ASTM D 412 : 2016


Rubber and Rubber Products Hardness(Shore A) ASTM D2240 : 2015









Rubber and Rubber Products Hardness(Shore A) IS 3400 (Part 23):2002RA: 2017


Rubber and Rubber Products Hardness(Shore A) ISO 48 Part 4: 2018


Rubber and Rubber Products Hardness(Shore A) ASTM D2240 : 2015


Rubber and Rubber Products Hardness(Shore A) IS 3400 (Part 23):2002RA: 2017


Rubber and Rubber Products Hardness(Shore A) ISO 48 Part 4: 2018


Rubber and Rubber Products Hardness(Shore D) ASTM D2240: 2015


Rubber and Rubber Products Hardness(Shore D) IS 3400 (Part 23):2002RA: 2017


Rubber and Rubber Products Hardness(Shore D) ISO 48 Part 4: 2018


Rubber and Rubber Products Hardness(Shore D) ASTM D2240: 2015









Rubber and Rubber Products Hardness(Shore D) IS 3400 (Part 23):2002RA: 2017


Rubber and Rubber Products Hardness(Shore D) ISO 48 Part 4: 2018


Rubber and Rubber Products Tensile Strength IS 3400(Part 1):2012Ra: 2017


Rubber and Rubber Products Tensile Strength ISO 37: 2011


Rubber and Rubber Products Tensile Strength ASTM D 412 : 2016


Rubber and Rubber Products Tensile Strength IS 3400(Part 1):2012Ra: 2017


Rubber and Rubber Products Tensile Strength ISO 37: 2011


Rubber and Rubber Products Tensile Strength ASTM D 412 : 2016

685 MECHANICAL- SOILAND ROCK

Soil California Bearing Ratio IS 2720 (Part–16):1987 RA: 2016


Soil Grain size analysis IS 2720 (Part–4): 1985RA : 2015









Soil Liquid Limit IS 2720 (Part–5): 1985RA: 2015


Soil Plastic limit IS 2720 (Part–5): 1985RA : 2015


Soil Proctor test (by Light compaction)MDD

IS 2720 (Part–7):1980Ra: 2016


Soil Proctor test (by Light compaction)OMC

IS 2720 (Part–7):1980Ra: 2016


Soil Proctor test (by Heavy compaction)MDD

IS 2720 (Part–8): 1983RA : 2015


Soil Proctor test (by Heavy compaction)OMC

IS 2720 (Part–8) 1983RA: 2015


Soil Specific gravity IS 2720 (Part–3,Sec–1) : 1980: 2016

694 NON-DESTRUCTIVE-BUILDINGMATERIALS -REINFORCEDCONCRETESTRUCTURES

Non Destructive Testing Rebound Hammer Test IS 13311 (Part–2) :1991: 2013


Non Destructive Testing Ultrasonic Pulse Velocity Tests IS 13311 (Part–1) :1991 RA: 2013








Site Facility


Metal Coating Adhesion Test/ Pull Off Test ASTM D4541: 2017


Metal Coating Coating Thickness IS 3203:1982 RA: 2016


Metal Coating Coating Thickness ASTM B 499-09: 2014


Positive Material Identification Segregation of mix up Alloys(Fe,Cu, Al & Ni base alloys)

ASTM E 1916: 2011


Positive Material Identification Segregation of mix up Alloys (Fe,Cu, Al & Ni base alloys)

W/OPN/12 IssueNo.02: 2016


Reinforced Concrete structure Pile integrity ASTM D 5882: 2016






Date post:	11-Mar-2020
Category:	Documents
Upload:	others
View:	11 times
Download:	0 times

Laboratory Name METALAB ENTERPRISE, 25-26, NILKANTH …...RING ROAD, ODHAV, AHMEDABAD, GUJARAT ,...

Documents