WHEELSET 2014

Cycling LiteTurn a better world

www.laminar-bike.com

ROAD

MTB

ACE

MA

GP30

XC260

INDEX

Rim Diameter: Front 634mm / Rear 634mmO.L.D: Front 100mm / Rear 130mm

Front Wheel Spokes Type: Aero 2/2.2/0.95Rear Wheel Spokes Type: Aero 2/2.2/0.95

Nipples: Black aluminum Weight: (F) 510g / (R) 660g

ACE

LAMINAR ACE – Excellent, lightweight carbon wheels for your road riding experience.

ACE wheels are not only lightweight, but are also technically superior with new ideas to obtain a smooth rotation and sufficient rigidity. For a rigid, lightweight wheel, this is your best choice.

HIGH-PROFILE CABON WHEELSET

Weight: 1170gPrimary Uses: ROAD USD. 11004

ROADHIGH-PROFILE CABON WHEELSET

ACE CARBON TUBULAR RIM

At only 280g, the ACE carbon tubular rim is incredible lightweight.

We not only pursued a balanced light weight rim but also security. We

engineered woven arrangement, and a time trusted molding practice. The achievements are these ACE Carbon Wheels!

Rim material: CARBON Weight: 280g Width: 20.6

DESIGN

Simple but not so simple wheels. We placed the bearings towards the outside of the front wheel to achieve a highly rigid wheel with great rolling inertia.

Water resistant hub design. Because of the two 90-degree turn angles of this design, the air viscosity created through the turning of the wheel

bearings.

SPOKES

Using high-strength lightweight Pillar spokes.Spokes Type: Aero 2/2.2/0.95

QUICK RELEASE

The quick release, by Fourier, weighs only 42g.

The CNC precision crafted curved lines combined with quick release carbon lever provide the perfect combination

Alloy and Carbon bonded Lever Ti Axle Weight: 42g

ACE ALLOY HUB

Simple but not so simple wheels.

Along with its sleek lines, we put high-quality bearings in this front wheel along with a diameter of 17mm axle to achieve an optimal rolling inertia. The rear wheel is 15mm diameter with new high-strength galvanized metal shaft bearings to improve the overall riding life. It sports an internal drive with a four ratcheting pawl system precisely calculated at the best angle to achieve perfectly smooth rotation even after 2,000 km of ride testing!

O.L.D: Front 100mm / Rear 130mm Weight: (F)94.7g (R)250.5g Hole: (F)16/20 (R)20/24

5

Rim diameter: Front 634mm / Rear 634mm

O.L.D: Front 100mm / Rear 130mmFront Wheel Spokes Type: Double Butted 2/1.8/2

Rear Wheel Spokes Type: Double Butted 2/1.8/2Nipples: Black aluminum

Weight: (F) 690g / (R) 870g

GP30

Laminar_GP30 classic wheels

This rigid wheel has proven itself as a long lasting wheel during its 4,000 km machine and ride testing life. Using carbon-wrapped aluminum rims give it a strong aluminum frame base and also sports quality bearings in its hub body. It may not be the lightest in weight, but it is tough enough to provide a long riding life to support those longest distance rides for a basic model wheel.

Weight: 1560gPrimary Uses: ROAD USD. 799

COMFORTABLE CARBON WRAP WHEELSET

6

ROADGP30 RIM

Bring more than just a carbon wrap alloy rim through better technology.

A bit like the pursuit of a better life, we looked at a way to provide more rigid ride to a traditional aluminum rim. We did this by attaching a layer of carbon, not only effectively increasing the rigidity of the rim, but also bringing more of a rims beauty outwards.

Rim material: 27mm Alloy rim + Carbon wrap Weight: 300 Width: 20

DESIGN

Water resistant hub design.

Because of the unique design of the hub body, the air viscosity created through the turning of the wheel generates pressure to prevent water from easily flowing into the inner bearings.

SPOKES

Using high-strength lightweight Pillar spokes

Spokes Type: Double Butted 2/1.8/2

QUICK RELEASE

The quick release, by Fourier, weighs only 45g.

The CNC precision crafted lightweight alloy lever

CNC Alloy Lever Ti Axle Weight: 45g

GP30 HUB

Sleek styling with powerful four pawl design.

The GP30 hubs smoother exterior design uses a sleek form of design, while also using this design seamlessly to improve the overall bearing life. It sports an internal drive with a four ratcheting pawl system precisely calculated at the best angle to achieve perfectly smooth rotation.

O.L.D: Front 100mm / Rear 130mm Weight: (F)114.5g (R)250.5g Hole: (F)16/20 (R)20/24

COMFORTABLE CARBON WRAP WHEELSET

7

Rim Diameter: 26”/27.5”/29”O.L.D: Front 110mm / Rear 150mm

Axle: Front 20mm / Rear 12mmFront Wheel Spokes Type: Double Butted 2/1.8/2

Rear Wheel Spokes Type: Double Butted 2/1.8/2Nipples: Black aluminum

Weight: (F) 1124g / (R) 1157g

LAMINAR MA DOWNHILL – Built for strength to withstand downhill riding

To withstand today’s extreme downhill riding, we had to design these wheels with strength and rigidity in mind, along with the highest standards of safety as well. Not only are these wheels rotationally smooth, but they are able to take high impacts during their brisk performance.

Weight: 2281gPrimary Uses: DOWNHILL USD. 1100

DOWNHILL WHEELSETMAMillion impact

8

MTB

DESIGN

Water resistant hub design.

Because of the two 90-degree turn angles of this design, the air viscosity created through the turning of the wheel generates pressure to prevent

SPOKES

Using high-strength lightweight Pillar spokes.

Spokes Type: Double Butted 2/1.8/2

MA DOWNHILL HUB

MA DOWNHILL RIM

Sleek styling with powerful four pawl design.

Used within the front wheels hub is a 25mm high-strength load bearing (up to 400N). This coupled with two metal rings to improve bearing life with stability, greatly enhances the smooth rotation and the ride life of this and impact resistant hub. The rear wheel has 17mm diameter spindle bearings with high-strength galvanized metal to improve the overall ride life. It sports an internal drive with a four ratcheting pawl system precisely calculated at the best angle to achieve perfectly smooth rotation.

O.L.D: Front 110mm / Rear 150mm Axle: Front 20mm / Rear 12mm Weight: (F)264g (R)297g Hole: (F)32/36 (R)32/36

Stonebreaker! Incredibly rigid!

The high quality alloy rim with its rigid carbon wrap makes these aluminum rims super strong, not only to resist whatever the trail has to offer but also resists small scratches affecting it’s high quality surface.

Rim material: Alloy rim + Carbon wrap Weight: 740g Width: 21 Rim Diameter: 26”/27.5”/29” Hole: 32/36

9

XC260

Feel free to ride anywhere!

The XC260 is a safe and suitable wheelset to use for enduro with standard wheels! Using carbon-wrapped aluminum rims give it a strong aluminum frame base and also sports quality bearings in its hub body to provide great impact resistance and durability. This wheel provides a superior speed and performance in a rigid and durable wheel.

Weight: 1980gPrimary Uses: CROSS COUNTRY ENDURO ALL MOUNTAIN USD. 799

SUPER IMPACT MTB WHEELSET

Rim Diameter: 26”/27.5”/29”O.L.D: Front 100mm / Rear 135mm

Axle: Front QR/15mm / Rear QR/12mmFront Wheel Spokes Type: Double Butted 2/1.8/2

Rear Wheel Spokes Type: Double Butted 2/1.8/2Nipples: Black aluminum

Weight: (F) 940g / (R) 940g

10

MTBMTBSUPER IMPACT MTB WHEELSET

DESIGN

Water resistant hub design.

Because of the two 90-degree turn angles of this design, the air viscosity created through the turning of the wheel generates pressure to prevent water from easily flowing into the inner bearings

SPOKES

Using high-strength lightweight Pillar spokes.

Spokes Type: Double Butted 2/1.8/2

XC-260 HUB

XC-260 RIM

Fast and superior performing hub.

In order to obtain a smooth rotating hub with excellent impact life we manufacture the front hubs using 20mm high strength bearings. In addition to the impact qualities, the hubs can withstand more external rotation forces.

The rear wheels have 17mm diameter spindle bearings with high-strength galvanized metal to improve the overall riding life. It sports an internal drive with a four ratcheting pawl system precisely calculated at the best angle to achieve perfectly smooth rotation.

O.L.D: Front 100mm / Rear 135mm Axle: Front QR/ 15mm / Rear QR 12mm Weight: (F)287g (R)285g Hole: (F)24/28/32 (R)24/28/32

Bring more than just a carbon wrap alloy rim through better technology.

Bring more than just a carbon wrap alloy rim through better technology

A bit like the pursuit of a better life, we looked at a way to provide more rigid ride to a traditional aluminum rim. We did this by attaching a layer of carbon, not only effectively increasing the rigidity of the rim, but also bringing more of a rims beauty outwards.

Rim material: Alloy rim+Carbon wrap Weight: 540g Width: 19 Rim Diameter: 26”/27.5”/29” Hole: 24/28/32

11

WHEELSET 2014

Cycling LiteTurn a better world

www.laminar-bike.com