Lampholders - Steven Engineering · Features Lamp-Lock design for quick relamping. Models dedicated...

Lampholders Index

INDEXOverview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S2Incandescent LampholdersOutlet Box, Keyless and Pull Chain . . . . . . . .S3, S4Metal Shell and Interiors . . . . . . . . . . . . . . . . . . .S5Phenolic Cap and Shell . . . . . . . . . . . . . . . . . . . .S5Multi-Lampholder Clusters . . . . . . . . . . . . . . . . .S6Porcelain Par Connectors . . . . . . . . . . . . . . . . . .S6Bayonet Socket–Single Contact . . . . . . . . . . . . . .S6Porcelain Mogul Base . . . . . . . . . . . . . . . . . . . .S7Socket Extensions . . . . . . . . . . . . . . . . . . . . . . . .S8Appliance Heating Receptacle . . . . . . . . . . . . . .S8Porcelain and Phenolic . . . . . . . . . . . . . . . . . . . .S8Porcelain Snap-In . . . . . . . . . . . . . . . . . . . . . . . .S9Porcelain Keyless–Commercial Units . . . . . . . . . .S9Porcelain Keyless Fixture Single Circuit-Medium Base . . . . . . . . . . . . . . . .S9Porcelain Keyless Medium Base–Side Angle Mounted . . . . . . . . . . . . . . . . . . . . .S10Phenolic Keyless Fixture–Medium Base . . . . . .S10Lampholders for Recessed Single Contact Lamps . . . . . . . . . . . . . . . . . . . . . . . . .S10Lampholders for Metal Halide and Quartz Halogen Lamps . . . . . . . . . . . . . . . . . . .S10Candle Sockets . . . . . . . . . . . . . . . . . . . .S10–S12Fluorescent LampholdersCompact Fluorescent Ceiling Lampholder . . . . . .S4Linear Fluorescent . . . . . . . . . . . . . . . . . .S13–S17

Medium Bi-Pin . . . . . . . . . . . . . . . . . . .S13–S15High Output . . . . . . . . . . . . . . . . . . . . .S13, S14Slimline . . . . . . . . . . . . . . . . . . . . . . . . .S13, S14Miniature . . . . . . . . . . . . . . . . . . . . . . . . . . .S16T-8 to T-5 Adapter . . . . . . . . . . . . . . . . . . . . .S16

4-Pin Long Twin Tube with 2G11 Base . . . . . . .S17Lamp Support Clips for Long Twin Tube . . . . . . .S18Compact Fluorescent Lampholders (CFL’s) . . . . . . . . . . . . . . . . .S19–S22For a complete listing of OEM products, see the OEM-100 Catalog.

SECTIONSLampholders

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com

LAMPHOLDERS

To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com

Lam

phol

ders

S2

A VARIETY OF INCANDESCENT AND FLUORESCENT STYLES IN A RANGE OF RATINGS AND MATERIALSLeviton offers a complete selection of outlet box, incandescent, fluorescent and specialty lampholders, in various ratings andmaterials. The following pages offer a variety of types and styles.

OUTLET BOX LAMPHOLDERAvailable in keyless, pull chain andoutlet models, all featuring easytwist-lock mounting.Cat. No. 8827-CW4 shown

PORCELAIN MEDIUM BASELAMPHOLDER With a choice of mounting andwiring options, these lampholdersare ideal for a wide range of commercial and residentialincandescent fixtures. Cat. No. 8101 shown

CANDELABRA BASE LAMPHOLDER Keyless lampholders for chandeliersand other fixtures, featuring varioushickeys or double snap-in spring clips. Cat. No. 10014-800 shown

FLUORESCENT LAMPHOLDER FORMEDIUM BI-PIN LAMPSFeatures Lamp-Lock design for quickrelamping. Models dedicated forenergy-efficient T-8 lamps available.Cat. No. 13653-WP shown

COMPACT FLUORESCENTLAMPHOLDERS Available for all popular 2-pin and4-pin lamp bases, with a variety ofmounting options. Color-coded foreasy wattage identification.Cat. No. 26725-426 shown

PORCELAIN MOGUL BASELAMPHOLDER A complete selection of high-quality porcelain moguls withleads or screw terminals.Pulse-rated models available.Cat. No. 8756 shown

METAL SHELL LAMPHOLDERMedium base, electrolier lampholdersavailable in a variety of attractive finishes.Cat. No. 9346-PG shown

LONG TWIN-TUBE 2G11 BASE LAMPHOLDERSChoice of mounting and wiringoptions to reduce fixtureassembly time.Cat. No. 13453 shown


Ø 1.63 (41.3)

1.52

(38

.5)

Ø 4.50 (114.3)

9875-2

Ø 1.33 (33.9)

2.01

(50

.9)

Ø 4.56 (115.9)

8827-CW2

Incandescent Lampholders

S3For answers to technical questions, call Leviton’s Techline at 1-800-824-3005

660W 600V • 660W 250V

Medium Base Incandescent Lampholders

SPECIFICATIONS AND FEATURES

• Twist-lock mounting• Pull chain models have bell at end of chain on

3 foot cord• Medium base

TESTING AND CODE COMPLIANCE

• UL Listed (File #E-3810)• CSA Certified (File #LR-1863)

Outlet Box Lampholders660 WATT 600V One-Piece Keyless Top Wired URDESCRIPTION/ WHITE UREA OD FITS BOX SIZETERMINALS CAT. NO.2 Terminal Screws 8829-CW1 41⁄2" 31⁄4" or 4"6" Pigtail Leads 8829-CW2 41⁄2" 31⁄4" or 4"4 Terminal Screws 8829-CW4 41⁄2" 31⁄4" or 4"

660 WATT 250V One-Piece Pull Chain Top Wired URDESCRIPTION/ WHITE UREA OD FITS BOX SIZETERMINALS CAT. NO.2 Terminal Screws 8827-CW1 41⁄2" 31⁄4" or 4"6" Pigtail Leads 8827-CW2 41⁄2" 31⁄4" or 4"2 Terminal Screws 8827-CW4 41⁄2" 31⁄4" or 4"with Captive Clamps

660 WATT 250V One-Piece Keyless Top Wired URDESCRIPTION/ PORCELAIN OD FITS BOX SIZETERMINALS CAT. NO.2 Screws� 9874 33⁄4" 31⁄4"2 Screws, no cage lip 9875 41⁄2" 31⁄4" or 4"6" Pigtail Leads, no cage lip 9875-2 41⁄2" 31⁄4" or 4"4 Screws 49875 41⁄2" 31⁄4" or 4"4 Quickwire Push-In� 9883 41⁄2" 31⁄4" or 4"

660 WATT 250V One-Piece Pull Chain Top Wired URDESCRIPTION/ PORCELAIN OD FITS BOX SIZETERMINALS CAT. NO.2 Screws 29816-C 41⁄2" 31⁄4" or 4"6" Pigtail Leads 29816-C2 41⁄2" 31⁄4" or 4"2 Screws w/Captive Clamps 49816-C 41⁄2" 31⁄4" or 4"for 4-Wire TerminalsInterior Mechanism for 29816-CM*2-Piece Outlet Box Lampholders�

*When existing stock is depleted, this item will be DISCONTINUED.CSA Certified except where indicated by�

Ø 1.74 (44.2)

2.01

(50

.9)

Ø 4.50 (115.3)

29816-C


2.50

(63

.5)

Ø 4.56 (115.9)

9726-C

9860

2.50

(63

.5)

Ø 4.56 (115.9)

9716-C

Inca

ndes

cent

and

Flu

ores

cent

Lam

phol

ders

S4

660W 125V — 15 AMP-125V • 120W 250V

Medium Base Incandescent and GU24 Base Fluorescent Lampholders



Outlet Box Incandescent Lampholders• 2-Pole, 2-Wire Outlet; 2-Pole, 3-Wire Outlet• Twist-lock mounting• Pull chain models have bell at end of chain on

3 foot cordFluorescent Ceiling Lampholder*• Installs indoors in closets, garages, basements,

utility rooms and attics• Reduces risk of fire in closets and closed spaces• Built of tough thermoplastic• Use with a standard wall switch• Pigtail leads provide easy installation

• Knockout holes on box enable multiple configurations

* Patent pending


Outlet Box Incandescent Lampholders• UL Listed (File #E-3810; E-7516)• CSA Certified (File #LR-1863)Fluorescent Ceiling Lampholder• cULus Listed• Meets NFPA 70, NEC Section 410.8B Requirements

and Canadian Electric Code Requirements for usein closets with lamp guard

• Backed by a Limited Two-Year Warranty

Outlet Box Lampholders660 WATT 125V Lampholder Outlet 15 AMP-125V One-Piece Pull Chain Side WiredUDESCRIPTION/ PORCELAIN OD FITS BOX SIZE NEMA CONFIG.TERMINALS2 Screws� 9716-C 41⁄2" 31⁄4" or 4"

660 WATT 125V Lampholder Outlet 15 AMP-125V One-Piece Pull Chain Top WiredURDESCRIPTION/ PORCELAIN OD FITS BOX SIZE NEMA CONFIG.TERMINALS2 Screws 9726-C 41⁄2" 31⁄4" or 4"

Ball and Chain AccessoriesDESCRIPTION BRASS FINISH NICKEL FINISHNo. 6 Chain; 1⁄8" Dia. Balls 18302-1 18302-1N

Connector for No. 6 Chain 9820 9820-N

Chain, 3 feet long, End Bell and 6 6-NConnector; use as extension or replacement; 1⁄25" Dia. Balls

DESCRIPTION BROWN WHITEInsulating Link; Thermoplastic 9839 9839-I13⁄4" Total Length

CSA Certified except where indicated by�

GU24 Base Fluorescent LampholderEnergy-Saving Keyless Bi-Pin Compact Fluorescent Ceiling Lampholder for Closets and Closed Spaces 120 WATT 250V AC DESCRIPTION CAT. NO.Lampholder with pigtail leads and knockout holes for multiple configurations 9860Lampholder with pigtail leads and knockout holes for multiple configurations; 9860-Bwith 13W BulbLampholder with pigtail leads and knockout holes for multiple configurations; 9860-BLwith 13W Bulb and Lamp GuardLamp Guard 9860-L13W Replacement Lamp 9865

Note: Not intended for use with incandescent lamps, dimmers or occupancy sensors.

5-15RG

W

1-15R W

18302-1N

9820

6

9839-I


Ø 0.75 (19.1)

Ø 1.94 (49.3)

1.20

(30

.5)

2.68

(68

.2)

2.41

(16

.1)

Ø 1.53 (38.9)

95110

Ø 1.36 (34.5)

Ø 1.38 (34.9)

1.06

(27

.0)

0.28

(7.

1)

2.38

(60

.3)

7080

Ø 1. 38 ( 38. 9)

Ø 1. 36 ( 34. 5)

2.38

(60.

3)1.06

(27.

00)

0.28

(71.

0)

9346



250W 250V • 660W 250V



• Phenolic interior with aluminum screwshell• 2-Circuit lampholders operate dual-filament lamps

in sequence of Low-Medium-High-Off• Cat. No. 7070 (2-Circuit, 3-Terminal) is wired in

series with keyless lampholder


• UL Listed (File #E-3810)• CSA Certified (File #LR-1863)• NOM Certified (File #057), except interiors

*FINISH

A suffix must be added to each basic catalog num-ber to indicate the finish desired. For PolishedGilt/Brass finish, add -PG; for Unfinished Aluminum,add -AL; for Polished Aluminum, add -NI (finishes onaluminum). For bright dip/Brass, add -BR (finish onbrass). CONSULT LEVITON REPRESENTATIVE FORAVAILABILITY OF FINISHES.

Metal Shell LampholdersMedium Base, Choice of Finishes* URDESCRIPTION CAT. NO. RATINGKey—Electrolier; Single Circuit; 1⁄8 IPS Tapped 9346 250W 250VBushing w/Set ScrewRemovable Turn Knob—Electrolier; Single Circuit; 10083-16 250W 250V1⁄8 IPS Tapped Bushing w/Set ScrewRemovable Turn Knob—Electrolier; 2-Circuit; 7070 250W 250V3 Terminal; 1⁄8 IPS Tapped Bushing less Set ScrewRemovable Turn Knob—Electrolier; 2-Circuit; 7090 250W 250V1⁄8 IPS Tapped BushingPull Chain—Electrolier; Single Circuit; 19980 660W 250V1⁄8 IPS Tapped Bushing w/Set ScrewsPush Through—Electrolier; Single Circuit; 7080 660W 250V1⁄8 IPS Tapped Bushing w/Set ScrewKeyless—Electrolier; Single Circuit; 8004 660W 250V1⁄8 IPS Tapped Bushing w/Set ScrewKeyless—Short Electrolier; Single Circuit; 9347 660W 250V1⁄8 IPS Tapped Bushing w/Set Screw

Metal Shell LampholdersInteriors — Medium Base, Phenolic Body, Aluminum Screw Shell‡URLAMPHOLDER CAT. NO. INTERIOR19980 19980-M†10083-16 10083-M†7070 7070-M†7090 7090-M†9346 9346-M†6098 7080-M†8004 8004-M†

Brown Phenolic Cap and Shell LampholdersTwo-Piece, Medium Base Electrolier Interiors URDESCRIPTION CAT. NO. RATING INTERIORS‡Pull Cord (nylon); 2-Circuit, 97092 250W 250V 7092-2M†1⁄8 IPS Threaded Cap w/Set ScrewPush-Through; 1⁄8 IPS Threaded 95110 660W 250V 7080-M†Cap w/Set ScrewKeyless; 1⁄8 IPS Threaded 95080 660W 250V 8004-M†Cap w/Set Screw

†UL Recognized component.NOM Certified except where indicated by‡.

2.38

(60

.3)

1.06

(27

.0)

Ø 1.38 (34.9)

Ø 1.36 (34.5)

0.28

(7.

1)

7090


Inca

ndes

cent

Lam

phol

ders

S6

660W 250V

Medium, Candelabra Base, Par Connectors—Incandescent Lampholders



• Pull chain models have bell at end of chain on 3 foot cord

• Medium and Candelabra bases• Par connectors have white, unglazed porcelain

body


• UL Listed (File #E-13405, E-3810)• CSA Certified (File #LR-5863, LR-1863)• NOM Certified (File #057)

Medium Base Multi-Lampholder ClustersTreated Aluminum Screw Shell URDESCRIPTION CAT. NO. RATING T TA B BA OAH T+B2-Light Twin 1⁄8 IPS 4020-A3A 660W 250V 15⁄16 5⁄16 — — —Male Top Bracket Only2-Light Twin 1⁄8 IPS 4015-D4F 660W 250V 111⁄16 5⁄16 111⁄16 7⁄16 33⁄8Male (top & bottom)2-Light Offset 1⁄8 IPS 4032-E5F 660W 250V 13⁄4 5⁄16 13⁄4 7⁄16 311⁄16Male (top & bottom)3-Light 1⁄8 IPS Male 341-D4U 660W 250V 13⁄4 1⁄2 13⁄4 7⁄16 31⁄2(top & bottom)‡2-Light Offset 1⁄8 IPS 4034-F5A 660W 250V 13⁄4 5⁄16 115⁄16 1⁄2 33⁄4+Male (top); Pullchain 1A 125V TSwitch (bottom) with1⁄2" usable shank�

2-Light Twin 1⁄8 IPS 4017-D2F 660W 250V 11⁄16 5⁄16 111⁄16 3⁄8 213⁄16+Male (top); Pullchain 1A 125V TSwitch (bottom)3⁄8" usable shank�

+Includes nut.Leads are No. 18 AWG 105°C plastic; 9" long, stripped 3⁄4"; untinned and pulled through top bracket.

Porcelain Par ConnectorsURDESCRIPTION CAT. NO. RATINGMedium Base for PAR #46 and #38 lamps. Leads 368-1 660W 125Vare No. 14 AWG 200°C SEW-2 Silicone Rubber Insulated; 18" Long, Stripped 3⁄4". Others available on inquiry‡Mogul Base for PAR #56 and #64 lamps. Leads are 357-8 1000W 125VNo. 14 150°C SEWF-2; 18" Long, Stripped 3⁄4". Others available upon request

Bayonet Socket — Single ContactCandelabra BaseDESCRIPTION CAT. NO. RATINGFlat Bracket. Leads are No. 18 AWG, 105°C Plastic; 905 Low Voltage6" Long, Stripped 3⁄4" (one black, one white)�‡

All devices are UL Listed except Cat. No. 905. Also CSA Certified except where indicated by�, and NOM Certified exceptwhere indicated by‡.

4017-D2F

1.69 (42.8) 1.81 (46.0)

0.31 (7.9) 0.38 (9.5)

BLACK

WHITE

TA

T B

BA

1.75 (44.5) 1.94 (49.2)

0.31 (7.9) 0.50 (12.7)

BLACK

WHITE

TA

T B

BA

4034-F5A

1.75 (44.5) 1.75 (44.5)

0.44 (11.1) 0.31 (7.9)

BLACK

WHITE

BA

B T

TA

4032-E5F

4034-F5A

341-D4U

4032-E5F


1.63

(41

.3)

0.56

(14.

3)

1.75 (44.5)

1.38 (34.9)

1.63 (41.3)

2.25 (57.2)

8806

Ø 2.16 (54.8)

2.61

(66

.3)

8694

2.61

(66

.3)

Ø 2.16 (54.8)

8750

Ø 2.13 (54.0)

3.02

(76

.6)

8746



1500W 600V • 660W 1000V

Mogul Base Incandescent Lampholders


• Cat. No. 8746 – Porcelain body gray glazed withceramic arc shield; Cat. No. 8750 – Porcelainbody yellow glazed; Cat. No. 8751 – Porcelainbody pink glazed

• All other moguls listed have white glazed porcelain body

• Copper-alloy nickel-plated screw shell


• UL Listed (File #E-13402)• CSA Certified (File #LR-1863)• NOM Certified (File #057)• Cat. No. 8751 complies with NFPA 70-2005

requirements for open-rated fixtures

Porcelain Mogul Base LampholdersWith Leads* URDESCRIPTION CAT. NO. RATING OD OHKeyless, Single Circuit. For high pressure 8746 1500W 600V 21⁄8 31⁄64sodium lamps up to 1000 watts. 5KV Pulse-rated8-32 Mounting Screws on 13⁄8" CentersKeyless, Single Circuit. Positon-oriented. 8750 1500W 600V 25⁄32 239⁄64For Super Metalarc HID lamps. 8-32 Mounting Screws on 13⁄8" CentersKeyless, Single Circuit. For high-pressure 8756 1500W 600V 25⁄32 239⁄64sodium lamps up to 400 watts. 4KV Pulse-rated8-32 Mounting Screws on 13⁄8" CentersLow Pressure Sodium. For use with all 8806 660W 1000V 13⁄8 15⁄8single-end bayonet base low pressure sodium lamps�‡Designed for Open-Fixture Shielded Metal 8751 1500W 600V, 25⁄32 239⁄64Halide Lamps. Complies with NFPA 70-2005 4KV Pulse Ratedfor Open-Rated Fixtures. 8-32 Mounting Screws on 13⁄8" Centers

*Leads types, lengths and ratings vary with the end use applications. Standard leads as well as variations available on inquiry.

Screw Terminals URDESCRIPTION CAT. NO. RATING OD OHKeyless; 2-Piece; Single-Pole� 8765 1500W 600V 25⁄16 223⁄64

Keyless;. Single Circuit with 8-32 8694 1500W 600V 25⁄32 239⁄64Lock Nuts on 13⁄8" Centers.Die-cast caps available upon request

CSA Certified except where indicated by�, and NOM Certified except where indicated by‡.


Ø 2.31 (58.7)

1.53

(38

.9)

0.77

(19

.4)

Ø 2.19 (55.6)

9880

1.69

(42

.9)

1.94 (49.3)

1.94 (49.3)

19062

2.19

(55

.5)

Ø 1.63 (41.3)

1.00

(25

.4)

2005

Inca

ndes

cent

Lam

phol

ders

S8

660W 250V • 1500W 600V

Medium, Mogul and Candelabra Base Incandescent Lampholders


Socket Extensions — Single CircuitMedium–Medium URDESCRIPTION CAT. NO. RATING2-Piece Porcelain; Mounting Hole 13⁄8" Dia. 2004 660W 250VExtension 11⁄4"*1-Piece Porcelain; Slotted Mounting Hole 13⁄8" Dia. 2005 660W 250VExtension 11⁄4"*1-Piece Phenolic. Extension 13⁄16"** 2006 660W 250V

*To be used with porcelain sockets only**To be used with phenolic sockets only

Mogul–Mogul URDESCRIPTION CAT. NO. RATING1-Piece Porcelain. Extension 23⁄8"‡ 8647 1500W 600V

Socket AdapterMogul-To-Porcelain Medium URDESCRIPTION CAT. NO. RATING1-piece. Meets Fed. Spec. W-L-142a‡ 8681 660W 250VSame as above, except 4 KV Pulse-Rated‡ 8681-400 660W 250V

4 KV Pulse-Rated

Appliance Heating ReceptaclePorcelain Two-Piece URDESCRIPTION CAT. NO. RATING2-piece Heating Receptacle. Gasket Furnished‡ 8110 660W 250V

Porcelain and Phenolic LampholdersPony Cleat Type URDESCRIPTION CAT. NO. RATING OD OH CCandelabra Base; Plastic. 10028 75W 125V 17⁄16 7⁄8 11⁄8Not UL Listed�‡Miniature Base, Plastic. 10020 75W 125V 15⁄16 7⁄8 31⁄32Not UL Listed�‡Medium Base, Phenolic 9063 660W 250V 17⁄8 11⁄2 115⁄16

Medium Base, Porcelain 19062 660W 250V 17⁄8 11⁄2 115⁄16

Surface Type URDESCRIPTION CAT. NO. RATING OD OH CMedium Base; Porcelain; 9880 660W 250V 25⁄16 11⁄2 13⁄8Low 2-PieceMedium Base; Porcelain; 9882 660W 250V 25⁄16 17⁄8 13⁄8High 2-Piece�‡CSA Certified except where indicated by�, and NOM Certified except where indicated by‡.


• Medium-to-Medium Extenders available in phenolic and porcelain

• Pony Cleat Receptacles have open wiring terminals• Two-piece surface-type lampholders have con-

cealed wiring terminals with wireways for top andcontinuous wiring


• UL Listed (File #E-3810; E-13396)• CSA Certified (File #LR-1863)• NOM Certified (File #057)


1.47

(37

.3)

Ø 1.75 (44.4)

8101

1.52

(38

.5)

Ø 1.38 (34.9)

1.88

(47

.8)

3152

1.69

(42

.9)

0.16

(4.

0)

Ø 1.50 (38.1)

Ø 0.84 (21.4)

10085

Ø 1.69 (42.9)

Ø 1.36 (34.5)

1.64

(41

.6)

8880



660W 250V • 250W 250V



• Suitable for a wide variety of fixtures, signs anddisplays

• Unglazed base and ring on two-piece lampholders

• Gasket supplied with two-piece ring type rated at90°C dry maximum


• UL Listed (File #E-3810)• CSA Certified (File #LR-1863)• NOM Certified (File #057)

Porcelain Snap-In Lampholders — Medium BaseScrew Terminals URDESCRIPTION CAT. NO. RATING OD OH1-Piece, Front Mounted. 1⁄4" Shoulder. 8880 660W 250V 111⁄16 11⁄2Panel Thickness: .025 –.062"1-Piece, Front Mounted. Shallow Back. 8875 660W 250V 111⁄16 111⁄16Panel Thickness: .030 –.062"

Porcelain Keyless Lampholders Commercial Units — Medium BaseSingle Circuit Screw Terminals URDESCRIPTION CAT. NO. RATING OD OHStraight Body with Cap. Screw Terminals. 10045 660W 250V 11⁄2 21⁄8Beaded Body for 11⁄2" Clamp Style 10065 660W 250V Body 11⁄2 21⁄8Shadeholder with Cap. Screw Terminals. Bead 15⁄8Adjustable Glass Retaining Ring with 20070 660W 250V 21⁄4 ringnut —Cap and Ring Nut. Screw Terminals.Straight Body with Leads. No. 18 AWG 10085 660W 250V 11⁄2 111⁄16105°C Plastic; 9" Long, Stripped 3⁄4" with Two 6/32 Mounting Screws

Porcelain Keyless Fixture Single Circuit — Medium BaseScrew Terminals URDESCRIPTION CAT. NO. RATING OD OH1-Piece, Front Mounted for Fixture or 9885 660W 600V 15⁄8 17⁄16Sign Use. Tapped 8-32 Bushings, Mounting Centers 113⁄16".2-Piece, Ring Type 9350 660W 250V 13⁄4 13⁄81-Piece with Removable Strap� 8871 660W 250V 111⁄16 19⁄16

Fixture Pan Lampholder with 3152-8 660W 250V 13⁄8 17⁄161⁄8" IPS Hickey

Leads URDESCRIPTION CAT. NO. RATING OD OH2-Piece Ring Type with Leads: No. 18 AWG, 8101 660W 250V 13⁄4 13⁄8105°C Plastic; 9" Long, Stripped 3⁄4"Angle Pan with Leads: No. 18 AWG Type AF 18315 660W 250V — —150°C Plastic; 9" Long, Stripped 3⁄4"Removable Bracket with Leads 8052-1 660W 250V 13⁄8 17⁄16

Screw-Mount Pulse-Rated Lampholder with 70052-100 660W 600V, 145⁄64 29⁄32Leads for Open-Fixture Lamps; 18 AWG 200ºC 4KV Pulse Rated600V SEW-2 (SF-2) wire; 9" Long, Stripped 1⁄2"

Two-Piece Pull Chain UDESCRIPTION CAT. NO. RATING OD OHRing Type; Screw Terminals; 9814 250W 250V 113⁄16 113⁄16Gasket Furnished�‡CSA Certified except where indicated by�, and NOM Certified except where indicated by‡.


1.16 (29.5)

0.64(16.3)

Ø 0

.96

(24.

5)

560

Ø 1

.50

(38.

1)

3.00 (76.2)

4005

2.22

(56

.4)

1.44

(36

.5)

Ø 1.25 (31.7)

3352-1

Ø 0

.64

(16.

3)

1.56

(39

.7)

0.94 (23.9)

Ø 0.82(20.9)

1.22

(30

.9)

0.08 (2.0)

554

Inca

ndes

cent

Lam

phol

ders

S10

660W 600V • 660W 250V • 250W 250V • 3000W 600V

Medium Base, Metal Halide and Quartz Halogen Incandescent Lampholders



• Cat. No. 3352 lampholder bodies have wireways• Side-Mounted lampholders are white glazed

porcelain with copper-alloy screwshell• Recessed Single-Contact lampholders have

porcelain body with nickel-plated steel housing • Cat. No. 560 has a metal lamp-positioning clip

(patent pending) that maintains lamp seatingposition

• Cat. No. 565 is designed for energy-efficient CDM lamps

• Cat. No. 570 twists in and is fully dimmable


• UL Listed (File #E-3810) Cat. Nos. 560, 565 and570: cULus (File #E-13405)

• CSA Certified (File #LR-1863)• NOM Certified (File #057)

Phenolic Keyless Fixture — Medium BaseScrew Terminals URDESCRIPTION CAT. NO. RATINGPermanent Bracket. Terminal Screws 3352-1 660W 250VBacked Out and StakedSame as 3352-1, with Shorter Bracket 3352-F 660W 250VRemovable Hickey. Terminal Screws Backed 3352-8 660W 250VOut and Staked

Hickeys and brackets are available in various types and sizes. Consult a Leviton representative for more information.

Porcelain Keyless, Side-Mounted — Medium BaseScrew Terminals URDESCRIPTION CAT. NO. RATINGSingle Lampholder w/Side Outlet Bushing—1⁄8 IPS 10091 660W 250VTwin Lampholder w/Bushed Flange—1⁄8 IPS 4010 660W 250VTwin Lampholder w/Single Outlet Bushing—1⁄8 IPS 4005 660W 250VSame as 4005 with 3⁄8 IPS Bushing 4006 660W 250V

All bushings are tapped and have set screw

Candle Sockets, Bottom Turn Knob — Medium BaseScrew Terminals UDESCRIPTION CAT. NO. RATINGThree-light, two-piece phenolic husk. 4063 250W 250V Lighting sequence: LO-MED-HI-OFF�

Lampholders for Recessed Single Contact LampsURDESCRIPTION CAT. NO. RATINGFront Flange Mount. Standard Leads are No. 18 AWG, 554 3000W 600VType SEW-2, 200°C, 18" Long, Stripped 3⁄4"‡Rear Flange Mount. Same Leads and Specs as No. 554‡ 555 3000W 600V

Lampholders for Metal Halide and Quartz Halogen LampsURDESCRIPTION CAT. NO. RATINGSingle-Ended Metal Halide for Lamps with a G8.5 Base. Lead-In Edge 560 660W 600V,on Body Ensures Proper Lamping. Standard Leads (2) are Black 5KV Pulse RatedNo. 18 AWG, Type SEW-2, 200ºC 600V Wire, 9" Long, Stripped .325"‡Single-Ended Metal Halide for Lamps with a GX8.5 Base, such as Philips 565 660W 600V,CDM-R11, rated up to 150W. Standard Leads (2) are Black No. 18 AWG, 5KV Pulse RatedSEW-2, 200ºC 600V Wire, 12" Long, Stripped 1⁄2"‡Twist-In Single-Ended Quartz Halogen for Lamps with a GU10 Base, 570 660W 600Vrated up to 150W. Fully Dimmable; Standard Leads (2) are White, No. 20 AWG Teflon® wire, rated 250ºC 600V, 6" Long, Stripped 1⁄2"‡

CSA Certified except where indicated by �, and NOM Certified except where indicated by‡.


0.77 (19.4)Across Flats

1.22

(31

.0)

10014-800

Ø 0.78 (19.8)

2.09

(53

.1)

10025

Ø 1.16 (29.4)

1.03

(26

.2)

9805

1.75

(44

.5)

3.13

(79

.5)

0.46

(11.

6)

Ø 1.27 (32.1)

4155



660W 250V • 250W 250V • 75W 125V

Candelabra and Medium Base Incandescent Lampholders


• Candle sockets for single-light applications• Fiber Disc Body for use with standard

candle tubes• Spring-tempered steel clip holds Cat. No.

10014-800 socket rigidly in place


• UL Listed (File #E-3810; E-13400)• CSA Certified (File #LR-1863)• NOM Certified (File #057)

Candle Sockets, Bottom Turn Knob — Medium BaseScrew Terminals URDESCRIPTION CAT. NO. RATING1-Piece Phenolic Body; 2 Leg Bracket; Single Light; 4155 660W 250VRemovable Interior; Knurl Nut and Lock Nut2-Piece Phenolic Husk & Removable Interior Husk; 4158 660W 250VSingle Light; Knurl Nut

Candle Sockets, Keyless* — Medium BaseFiber-Disc Body, Screw Terminals URDESCRIPTION CAT. NO. RATINGSolid Hickey, 2" Overall Height‡ 8684 660W 250VAdjustable Hickey. Overall Height: 4–53⁄4" 9800 660W 250

*Insulating paper liner pushes down against hickey projections.NOTE: These items are designed for use with standard socket candle tubes (115/16" dia.) and require a minimum of 13/16" dia. flat bottom of candle cup for clearance.

Candle Sockets, Phenolic — Medium BaseWith Removable Turn Knob, Screw Terminals URDESCRIPTION CAT. NO. RATINGRemovable Knob (Short Type), Adjustable Hickey. 9805* 250W 250VOverall Height: 4–51⁄2"Removable Knob, Removable 1-Leg Hickey. 9805-A* 250W 250VOverall Height: 27⁄16"

NOTE: These items are designed for use with standard socket candle tubes (115/16" dia.) and require a minimum of 13/16" dia. flat at bottom of candle for clearance.

Candelabra Base, Keyless*UR‡

DESCRIPTION CAT. NO. RATINGScrew Terminals; Solid Hickey. Overall Height: 2" 10025 75W 125VScrew Terminals; Solid Hickey. Overall Height: 11⁄2" 10027 75W 125VScrew Terminals; Adjustable Hickey: 31⁄4–43⁄4" 10026 75W 125V Double Snap-In Spring Clips. Height of socket from 10014-800 75W 125Vpanel is 1". Leads are No. 18 AWG 105°C plastic, 24" long, stripped 1⁄2"

*7/8" candle tube. All hickeys tapped 1/8 IPS.NOM Certified except where indicated by‡


Ø 1.64 (41.7)

2.12

(54

.0)

55

1.88

(47

.8)

Ø 1.5 (38.1)

167

Ø 0.75 (19.0)

1.25

(31

.8)

267

Ø 0.78 (19.8)2.

09 (

53.1

)

20025

Inca

ndes

cent

Lam

phol

ders

S12

75W 125V • 660W 250V

Candelabra and Medium Base Incandescent Lampholders


Candle Sockets — PorcelainCandelabra Base Screw Terminals UDESCRIPTION CAT. NO. RATINGSolid Hickey.* Overall Height: 23⁄32"�‡ 20025 75W 125V

*Other hickey sizes available

Keyless Heavy Duty Phenolic Single Circuit LampholdersTwo-Piece Pin Type URDESCRIPTION CAT. NO. RATINGCandelabra Base, Detachable Zinc-Plated Wire Hook. 267** 75W 125VAccepts No. 20 – No. 18 Stranded Insulated WireMedium Base, Detachable Zinc-Plated Wire Hook. 167** 660W 250VAccepts No. 14 – No. 12 Stranded Insulated Wire

Note: Linings assembled.**For temporary lighting — not waterproof.

Pigtail Type Medium Base with LeadsURDESCRIPTION CAT. NO. RATINGVinyl, Phenolic Interior & Screw Shell, Brass Shell 55** 660W 250VContact. Leads are No. 14 AWG, 6" Long, Stripped 3⁄4", Molded into Boots‡Phenolic with Brass Screw Shell. Leads Soldered 157** 660W 250Vand Hot Waxed in Deep Well are No. 14 AWG 6" LongSame as 157 above, with Left-Hand Screw Shell 157-X** 660W 250VRubber, Aluminum Screwshell. Leads are 124-D 660W 250VNo. 16 AWG, 6" Long, Soldered to Terminals and Sealed in Rubber Boot�

**For temporary lighting—not waterproof.All devices are UL Listed except Cat.No. 124-D. Also CSA Certified except where indicated by �, and NOM Certifiedexcept where indicated by‡Note: The listed products may be used at construction sites provided that bulb cages are used and suitable splices aremade. The listing for the products meets the OSHA requirement and is made for open wiring without a separate outlet box.


• Candle socket has white unglazed porcelain bodywith aluminum screw shell

• Choice of Pin-Type or Pigtail Type for temporarylighting applications

• Two-Piece Pin Type automatically pierces wire leads


• UL Listed (File #E-13400) 267**• UL Listed (File #E-3810) 55**, 157**, 157-X**

and 167**• CSA Certified (File #LR-1863)• NOM Certified (File #057)


Fluorescent Lampholders


660W 600V • 660W 1000V • 660W 250V

Medium, High Output and Slimline—Linear Fluorescent Lampholders


• Silver-plated copper alloy contacts• Quickwire terminals accept No. 18 AWG twisted

and tinned, solder-dipped or solid leads • Lampholders are white, starter bases are black


• UL Listed (File #E-5833)• CSA Certified (File #LR-1863; LR-5863;

LR-2200)• NOM Certified (#057)

For High Output Lamps — Recessed Double Contact, Pedestal Type URDESCRIPTION CAT. NO. CAT. NO. RATING

PLUNGER FIXEDScrew Mount, Push-in wiring.* 13464 13465 660W 600VSame as 13464/13465 except with Internal 23464 23465 660W 600VShunt Connection for Electronic Ballasts*Slide-on, Shallow Base, 13550 13551 660W 600VQuickwire Terminals* Slide-on, Shallow Base for Power Groove 13556 13557 660W 600Vand Jacketed Lamps, Quickwire Terminals*

For Slimline, Single Pin Lamps URDESCRIPTION CAT. NO. CAT. NO. RATING

PLUNGER FIXEDButt-On Surface Mounting, 452 — 660W 1000V12" Leads‡ — 453 660W 600VPedestal Base, Slide-On 466 — 660W 1000V

— 467 660W 600VShallow Base, Slide-On or Lock-On 2536 — 660W 1000VMounting, Quickwire Terminals* — 2537 660W 600V

For Medium Bi-Pin LampsURDESCRIPTION CAT. NO. RATING

WHITEThin Body, Quickwire Terminals 431-W 660W 600VAccommodate Rapid-Start CircuitsPedestal type, Straight-in Wiring 390-1W 660W 600VThrough Wireways or Screw Terminals‡Same as above, with Starter Base‡ 391-1W 660W 600V

Starter BasesFor Medium Bi-Pin Lamps URDESCRIPTION CAT. NO. RATINGStarter Base; Screw Terminals, Black‡ 380 660W 250VStarter Base; with Leads, Black‡ 396 660W 250V

NOM Certified except where indicated by‡*Suitable for outdoor applications when properly enclosed

1.14

(29

.0)

2.30

(58

.3)

1.74

(44

.2)

1.66 (42.1) 1.44 (36.5)

13464

1.17

(29

.7)

1.84

(46

.7)

1.31 (33.3)1.28

(32.5)

2536

1.75

(44

.5)

1.17

(29

.7)

0.17

(4.

3)

1.31 (33.3) 1.12 (28.5)

2537

0.47

(11

.9)

0.97 (24.6)

1.25 (31.8) 1.06 (27.0)

396


Fluo

resc

ent

Lam

phol

ders

S14

660W 600V • 660W 1000V • 75W 250V

Medium and Miniature Bi-Pin Lamps—Linear Fluorescent Lampholders


For Medium and Miniature Bi-Pin Lamps — Surface Mount with Leads* URDESCRIPTION CAT. NO. RATING

WHITERapid-Start Medium Bi-Pin, 9" leads 395-W 660W 600VRapid-Start Medium Bi-Pin, Disconnect 389-W 660W 600V(paired with Cat. No. 395-W), 9" leads Miniature Bi-Pin for T5 Lamp, 6" leads 420-W 75W 250V

*Leads are No. 18 AWG, 105°C plastic insulated wire

For Slimline, Medium Bi-Pin, High Output Lamps — Snap-In with Quickwire URDESCRIPTION CAT. NO. CAT. NO. RATING

PLUNGER FIXEDSlimline‡ 516 — 660W 1000V

— 517 660W 600VMedium Bi-Pin, Stainless Steel 13518 — 660W 600VCoverplate & Clip — 13519 660W 600VMedium Bi-Pin, Same as above, 23518 — 660W 600Vwith Internal Shunt for Use with — 23519 660W 600VElectronic BallastsHigh Output 800mA and 1500mA‡ 523 — 660W 600V

— 524 660W 600V

NOM Certified except where indicated by‡

Medium Bi-Pin Spacing

0.64 (16.3)

47.75 (1212.9) FOR 48" LAMPS

0.55 (14.0)

13518PLUNGER STYLE

13519STATIONARY STYLE

Ø1.64 (41.7)

45°

0.18

8(4

.76)

1.52 (38.50)

PANEL OPENING FOR 13518/13519

PANEL THICKNESS 0.035-0.050 (0.89-1.27)

R 0.813 (20.64)

KEY for13518/13519


• Versatile snap-in mounting reduces fixtureassembly time

• Quickwire terminals accept either No. 18 AWG(stranded, twisted or tinned), No. 18 AWG solid orNo. 16 AWG solid.

• Internal Shunt versions stamped “S” on back foreasy identification


• UL Listed (File #E-5833)• CSA Certified (File #LR-5863; LR-1863)• NOM Certified (#057)

1.22

(31

.0)

0.97 (24.6)

0.44 (11.1)

1.25 (31.8)

0.53

(13

.5)

395-W

0.66

(16

.7)

0.75 (19.1)

0.48 (12.3)

1.28 (33.5)

420-W

13518 — see diagram right


1.35

(34

.2)

0.22

(5.

9)

0.98 (24.9)

0.67 (17.0)

13653-WP

2.04

(51

.8)

0.38

(9

.7)

1.25 (31.8) 0.72 (18.3)

0.34 (8.6)

13357-N

1.68

(42

.6)

0.38

(4

.5)

0.72 (18.2)

1.25 (31.8)

0.34 (8.6)

13351-D



660W 600V

Medium Bi-Pin Lamps—Linear Fluorescent Lampholders


Lamp-Lock• Four-position lamp-lock socket

rotates 90°, forward and back, forquick relamping

• Lamp-Lock models have slim, lowprofile silhouette that fits 22 to 25gauge panels

• Chemical-resistant white thermo-plastic body


• UL Listed (File #E-5833)• CSA Certified (File #LR-1863;

LR-5863; LR-2200)• NOM Certified (#057)• Medium Bi-Pin lamps with Snap-

In/Slide-On Design and Lamp-Lockare VDE Certified to IEC

For Medium Bi-Pin Lamps — Turn-Type URDESCRIPTION CAT. NO. RATINGLow Profile, Slide-On, with Captive Nut 13353-N 660W 600VTall Profile, Slide-On, with Captive Nut 13357-N 660W 600VTall Profile without Side Grooves, 13359-N 660W 600VSlide-On, with Captive NutLow Profile Disconnect, Slide-On 13351-D 660W 600VTall Profile Disconnect, Slide-On 13354-D 660W 600VLow-Profile; Shunted, Slide-On 23351 660W 600V

For Medium Bi-Pin Lamps — Straight-In URDESCRIPTION CAT. NO. RATINGLow Profile, Slide-On 13150-UR5 660W 600VSelf-Locking; Slide-In, with Captive Nut. 13451-N 660W 600VFor use with T-8 Lamps

For Medium Bi-Pin Lamps — Snap-In/Slide-On Design and Lamp-Lock URDESCRIPTION CAT. NO. RATINGSnap-In or Slide-On Mounting Featuring Lamp-Lock, 13653-WP 660W 600Vwith Panel Locator Post. For T-8 and T-12 LampsSame as Above, Less Locator Post 13653-NP 660W 600VSame as 13653-WP, Except with Internal Shunt 23653-WP 660W 600VConnection for Electronic BallastsSame as Above, Less Locator Post 23653-NP 660W 600VSnap-In or Slide-On Mounting Featuring Lamp-Lock, 13652-WP 660W 600VOptional Panel Locator Post. Dedicated for Energy-Efficient T-8 Lamps OnlySame as 13652, Except with Internal Shunt 23652-WP 660W 600VConnection for Electronic BallastsSnap-In or Slide-On Mounting Featuring Lamp-Lock, 13652-WWP 600W 600Vfor Energy-Efficient T-8 Lamps Only. Wide-Wing DesignSame as Above, Less Locator Post 13652-WNP 600W 600VSame as 13652-WWP, Except with Internal Shunt Connection 23652-WWP 600W 600Vfor Electronic BallastsSame as Above, Less Locator Post 23652-WNP 600W 600VSnap-In or Slide-On Mounting Featuring Lamp-Lock, 13653-WWP 600W 600Vfor T-8 and T-12 Lamps. Wide-Wing DesignSame as Above, Less Locator Post 13653-WNP 600W 600VSame as 13653-WWP, Except with Internal Shunt Connection 23653-WWP 600W 600Vfor Electronic BallastsSame as Above, Less Locator Post 23653-WNP 600W 600V

NOTE: Also available with bottom push-in wiring. Contact your Leviton representative for further details.

1.02 (25.8)

0.38

(9.5

3)0.

31(7

.90)

1.00 (25.50)

Recommended Panel Thickness

0.02-0.03 (0.53-0.79)

0.18 (4.50)

Recommended Panel Opening for MediumBi-Pin Turn-Type LampholdersThis is only a recommendation —

lampholder will function over a wider range

Recommended Panel Opening for all -WP, -NPMedium Bi-Pin Snap-In/Slide-On Lampholders

0.38

(9.5

3)0.

31(7

.90)

Ø 0.18 (4.50)

1.031 (26.20)

Recommended PanelThickness0-021-0.031 (0.53-0.79)

Recommended Panel Opening for all -WWP, -WNP wide-wing models


Fluo

resc

ent

Lam

phol

ders

S16

120W 600V • 660W 600V

Medium and Miniature Bi-Pin Lamps—Linear Fluorescent Lampholders


For Medium Bi-Pin Lamps — Slide-On Design and Lamp-LockURDESCRIPTION CAT. NO. RATINGMedium Profile 0.91 (23.0) Lamp Center. Slide-On Mounting 13661 660W-600VFeaturing Lamp Lock. For T-8 and T-12 LampsSame as 13661, Except with Internal Shunt Connection 23661 660W-600Vfor Electronic BallastsTall Profile 1.18 (30.0) Lamp Center. Slide-On Mounting 13660 660W-600VFeaturing Lamp Lock. For T-8 and T-12 LampsSame as 13660, Except with Internal Shunt Connection 23660 660W-600Vfor Electronic Ballasts

For Miniature Bi-Pin Lamps — Snap-In/Slide-On Design and Lamp-LockURDESCRIPTION CAT. NO. RATINGLow Profile 0.62 (15.7) Lamp Center, Snap-In or Slide-On 13654-SWP 120W 600VMounting Featuring Lamp-Lock, with Panel Locator Post. For T-5 LampsSame as Above, Less Locator Post 13654-SNP 120W 600VTall Profile 0.98 (24.9) Lamp Center, Snap-In or Slide-On 13654-TWP 120W 600VMounting Featuring Lamp-Lock, with Panel Locator Post. For T-5 LampsSame as Above, Less Locator Post 13654-TNP 120W 600VLow Profile 0.62 (15.7) Lamp Center, Snap-In or Slide-On 23654-SWP 120W 600VMounting Featuring Lamp-Lock, with Panel Locator Post. For T-5 Lamps. Internal Shunt Connection for Electronic BallastsSame as Above, Less Locator Post 23654-SNP 120W 600VTall Profile 0.98 (24.9) Lamp Center, Snap-In or Slide-On 23654-TWP 120W 600VMounting Featuring Lamp-Lock, with Panel Locator Post. For T-5 Lamps. Internal Shunt Connection for Electronic Ballasts.Same as above, Less Locator Post 23654-TNP 120W 600V

T-8 to T-5 AdapterURLong T-8 to T-5 Adapter, converts existing T-8 fixtures to accept 13654-EXL 120W 600Venergy-efficient T-5 lamps; with Lamp Lock. Specify lamp length for proper orderingShort T-8 to T-5 Adapter, converts existing T-8 fixtures to 13654-EXS 120W-600Vaccept energy-efficient T-5 lamps; with Lamp-Lock.Specify lamp length for proper ordering

PANEL CUTOUT20–23 GAUGE PANELS

0.79 (20.0)

0.39

(10.

0)

0.28

(1

7.14

)

0.39 (1O.0)

0.14 (3.71)

Recommended Panel Opening for Miniature Bi-Pin Snap-In/Slide-On Lampholders

1.02 (25.9)

0.37

5(9

.53)

Recommended Panel Opening for T-8 to T-5 Adapter

0.38(9.7)

1.031(26.18)

0.35

0 (8

.89)

Recommended Panel Opening for Medium Bi-Pin Slide-On Lampholders


Lamp-Lock• Four-position lamp-lock socket rotates 90°,

forward and back, for quick relamping• Lamp-Lock models have slim, low profile silhou-

ette that fits 22 to 25 gauge panels• Chemical-resistant white thermoplastic bodyT-8 to T-5 Adapter• Cost-effective solution to incorporate miniature

bi-pin T-5 lamps into existing T-8 configurations


• UL Listed (File #E-5833)• CSA Certified (File #LR-1863; LR-5863;

LR-2200)• NOM Certified (#057)• Medium Bi-Pin Lamps with Slide-On Design and

Lamp-Lock are VDE Certified to IEC

1.11

(28

.2)

0.75 (19.1)0.37 (9.4)

13654-SNP

1.43

(36

.3)

1.19 (30.2)

1.39 (35.3)

0.34

(8.6

)

13654-EXL

1.43

(36

.3)

1.19 (30.2)

1.19 (30.2)

0.34

(8.6

)

13654-EXS




660W 600V

Long Twin Tube with 2G11 Base—Compact Fluorescent Lampholders

4-Pin Long Twin-Tube with 2G11 Base — Slide-In Mounting URDESCRIPTION CAT. NO. RATINGSlide-In for 18-20 Ga. Panels, Quickwire Terminals 13452 660W 600V

4-Pin Long Twin-Tube with 2G11 Base — Bottom or Back Mounting URDESCRIPTION CAT. NO. RATINGVertical Snap-In Mounting, Side Push-In Wiring 13453 660W 600VSame as above, with Internal Shunt Connection for Electronic Ballasts 23453 660W 600VHorizontal Snap-In Mounting, Bottom Push-In Wiring 13454 660W 600VSame as above, with Internal Shunt Connection for Electronic Ballasts 23454 660W 600VHorizontal Screw-Mount. Bottom Push-In Wiring 13455 660W 600VSame as above, with Internal Shunt Connection for Electronic Ballasts 23455 660W 600V

Note: See page S18 for Lamp Support Clips

PANEL-THICKNESS.023-.039 (0.58–0.99) MAX., INCLUDING PAINT0.

524

(13.

31)

1.000 (25.4)

Recommended Panel Opening for13453, 23453, 13454 and 23454

0.95

(24

.1)

0.15

(3.8

)

1.32 (33.5)

0.86 (21.8)

0.39(9.9)

0.69(17.5)

0.86 (21.8)

0.39(9.9)

0.69(17.5)

0.30 (7.6) 0.52

(13.2)

1.94

(49

.3)

0.02

3-0.

040

(0.5

8-1.

02)

1.00

(25

.4)

0.52(13.2)

0.02

3-0.

040

(0.5

8-1.

02)

13453 and 23453 13453 23453

0.02

3-0.

040

(0.5

8-1.

02)

0.52(13.2)

0.26

(6.

6)

Ø 0.146 (3.71)

1.90 (48.3)

0.95 (24.1)

0.30

(7.

6)

13454 and 23454 13454 23454

Ø 0

.146

(3.

71)

Ø 0.174 (4.42)

0.96 (24.4)

0.94

(23

.9)

0.80 (20.3)

0.20 (5.1)

1.87 (47.5)

0.95 (24.1)

1.35

(34

.3)

0.83

(21

.1)

0.30

(7.

6)

R0.078 (1.98)

1.35 (34.3)

13455 and 23455


• Vertical Snap-In model allows wires to berouted on either top or bottom of panel

• Two wiring ports per contact speed harness wiring

• Internal Shunt models eliminate need forextra jumper wire in fixtures designed forelectronic ballasts

• Low-profile design for smaller, more compact fixtures

• Superior metal-spring lamp retainer clips


• UL Listed (File #E-5833)• CSA Certified (File #LR-1863)• NOM Certified (File #057)

13454

13453


Fluo

resc

ent

Lam

phol

ders

S18

LAMP SUPPORT CLIPS

Lamp Support Clips for Long Twin Tube 2G11 Base Fluorescent Lampholders



• Choice of quality lamp support clips in avariety of configurations for long twintube lamps with 2G11 base

• UV stable clear polycarbonate clips forvertical or horizontal mounting

• Stainless steel clips with UV stable clearpolycarbonate base for horizontalmounting only; short or tall versions

• Plastic clips for slide-on or screw-mount

Plastic and Stainless Steel Lamp Support ClipsDESCRIPTION CAT. NO.Plastic Lamp Support Clip, Slide-On 23452-A*Plastic Lamp Support Clip, Screw Mount 23452-B*Horizontal Snap-In Lamp Support Clip for 13454, 23454, 13455 23452-H*and 23455. UV-Stable, Clear PolycarbonateVertical Snap-In Lamp Support Clip for 13453 and 23453. 23452-V*UV-Stable, Clear PolycarbonateStainless Steel Horizontal Lamp Support Clip, Short Version 23452-MTSStainless Steel Horizontal Lamp Support Clip, Tall Version 23452-MTL

*Note: Leviton strongly recommends replacing support clips 23452-A, 23452-B, 23452-V and 23452-H during lamp replacement.

23452-V

23452-H

23452-MTS 23452-MTL

0.43 (10.9)

0.62

(15.

7)0.

17

0.43 (10.9)

0.20 (5.1)

PANEL THICKNESS.023-.039 (0.58-0.99) MAX.INCLUDING PAINT

Ø0.218 (5.54)

SUGGESTED PANEL CUTOUTFOR LAMP SUPPORT CLIPS

Vertical Lamp Support Clip—23452-V

0.78 (19.8)

1.12

(28.

4)

0.83

(21.

1)

0.17

(4.3

)

0.43 (10.9)

RO.37(9.4)

0.20 (5.1)

0.65 (16.5)

Horizontal Lamp Support Clip—23452-H

METAL CLIP

PLASTIC SUPPORT

0.69

(17

.5)

1.31

(33

.3)

0.56 (14.2) Horizontal Lamp Support Clip, Short23452-MTS

0.83

(21

.0)

1.45

(36

.8)

Horizontal Lamp Support Clip, Tall23452-MTL

Horizontal Lamp Support Clips23452-MTS, 234452-MTL




75W 600V

Compact Fluorescent Lampholders (CFLs)

10mm Compact Fluorescent LampholdersFor G23 and G23-2 Lamp Bases — Rating: 75 WATT 600V URMOUNTING CAT. NO. COLOR LAMP PHILIPS OSRAM GE

BASE SYLVANIA LIGHTINGHorizontal Snap-In 26719-100 White G23,

G23-2Horizontal 26719-200 White G23,Screw-Down G23-2Vertical Top Snap-In 26719-300* White G234-Hole Vertical 26719-400 White G23,Screw-Down G23-2Vertical Bottom 26719-500 White G23,Snap-In G23-2

*Not compatible with 9-watt DTT lamps

For GX23 and GX23-2 Lamp Bases — Rating: 75 WATT 600V URMOUNTING CAT. NO. COLOR LAMP PHILIPS OSRAM GE

BASE SYLVANIA LIGHTINGHorizontal Snap-In 26720-100 White GX23,

w/Black GX23-2Horizontal 26720-200 White GX23, Screw-Down w/Black GX23-2Vertical Top Snap-In 26720-300* White GX23

w/Black4-Hole Vertical 26720-400 White GX23,Screw-Down w/Black GX23-2Vertical Bottom 26720-500 White GX23,Snap-In w/Black GX23-2

*Not compatible with 13-watt DTT lamps

PL-S DULUX S BIAX13W 13W 13WPL-C DULUX D DOUBLE 13W 13W BIAX

13W

PL-S DULUX S BIAX,5W, 7W 5W, 7W, 9W 5W, 7W9W DULUX D 9W

9W DOUBLE BIAX9W

26720-400

26720-300

26719-200

26719-100


• “Smart” CFL Lampholders arecolor-coded for easy wattage identi-fication

• Bottom Snap-In versions for easierpanel assembly

• Snap-In versions designed for 16 Ga. panels

• Metal-spring lamp-retainer clip pro-vides positive lamp retention and ismore durable than plastic clips

• Two wiring ports per contact speedharness wiring

• Four screw holes for greatermounting flexibility

• Wire-routing options for top or bot-tom side of mounting panel for easier assembly

• White thermoplastic body


• UL Listed (File #E-5833)• UL Listed for indoor and outdoor

applications when properly enclosed• CSA Certified (File #LR-1863) • NOM Certified (File #057)

1.01(25.65)

0.77-0.79(19.56-20.06)

0.88(22.35)

0.39(9.91)

0.39(9.91)

1.40(35.56)

0.68(17.27)

0.69

(17.

53)

0.13

(3.

30)

NOTE: PUNCH PANEL FROM THE DIRECTIONOF LAMPHOLDER INSERTION.RECOMMENDED PANEL THICKNESS0.023-0.039 (0.58-0.99) MAX INCLUDING PAINT

Horizontal Snap-In CFLs26720-100 Shown

1.00

(25

.4)

1.40

(35

.6)

1.00

(25

.4)

1.20 (30.6)1.09 (27.8)

0.22 (5.5)

NOTE: RECOMMENDED MOUNTINGSELF-THREADING #8 SCREW RECOMMENDED PANEL OPENING

0.81 (20.6)

0.81 (20.6)

Ø 0.19(4.75)

4-Hole Vertical Screw-Down CFLs — 26720-400 Shown

0.41(10.41)

0.56(14.22)

1.39(35.31)

PANEL CUTOUT

0.22(5.59)

R

0.87

(22

.10)

1.22

(30

.99)

1.22

(30

.99)

1.23(31.24)

0.13(3.30)

0.22(5.59)

1.33

(33

.78)

1.22

(30

.99)

1.40(35.56)

0.68(17.27)

NOTE: PUNCH PANEL FROM THE DIRECTIONOF LAMPHOLDER INSERTION.RECOMMENDED PANEL THICKNESS0.023-0.039 (0.58-0.99) MAX INCLUDING PAINT

Vertical Top Snap-In CFLs26720-300 Shown


Fluo

resc

ent

Lam

phol

ders

S20 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com

75W 600V


26725-419

26725-213

10mm Compact Fluorescent LampholdersFor G24d Lamp Bases 2-Pin — Rating: 75 WATT 600V URMOUNTING CAT. NO. COLOR LAMP PHILIPS OSRAM GE

BASE SYLVANIA LIGHTINGBottom Snap-InFor 16 Ga. Panels 26725-201 White G24d-1 PL-C DULUX D DOUBLEFor 18-20 Ga. Panels 26725-221 w/Black 10W, 13W 10W, 13W BIAX 10W, 13W For 16 Ga. Panels 26725-202 Green G24d-2 PL-C DULUX D DOUBLEFor 18-20 Ga. Panels 26725-222 18-W 18W BIAX 18WFor 16 Ga. Panels 26725-203 Orange G24d-3 PL-C DULUX D DOUBLEFor 18-20 Ga. Panels 26725-223 26W 26W BIAX 26WBottom Screw-Down4-Hole 26725-211 White G24d-1 PL-C DULUX D DOUBLE

w/Black 10W, 13W 10W, 13W BIAX4-Hole 26725-212 Green G24d-2 PL-C DULUX D DOUBLE

18W 18W BIAX 18W4-Hole 26725-213 Orange G24d-3 PL-C DULUX D 26W DOUBLE

26W DULUX T 26W BIAX 26W

For G24q and GX24q Lamp Bases 4-Pin — Rating: 75 WATT 600V Suitable for Dimming or Electronic Ballasts URMOUNTING CAT. NO. COLOR LAMP PHILIPS OSRAM GE

BASE SYLVANIA LIGHTINGBottom Snap-InFor 16 Ga. Panels 26725-401 White G24q-1 PL-C DULUX D/E DOUBLE For 18-20 Ga. Panels 26725-421 w/Black 10W, 13W 10W, 13W BIAX 10W, 13WFor 16 Ga. Panels 26725-402 Green G24q-2 PL-C DULUX D/E DOUBLEFor 18-20 Ga. Panels 26725-422 18W 18W BIAX 18WFor 16 Ga. Panels 26725-403 Orange G24q-3, PL-C 26W DULUX D/E DOUBLEFor 18-20 Ga. Panels 26725-423 GX24q-3 PL-T DULUX T/E BIAX

26W, 32W 26W, 32W 26WFor 16 Ga. Panels 26725-404 Yellow GX24q-4 PL-T 42W DULUX T/E PERFORMANCEFor 18-20 Ga. Panels 26725-424 42W BIAX 42WFor Universal ballast only, 26725-429 White G24q-3 PL-T 26W, DULUX T/E TRIPLE BIAX 18-20 Ga. Panels GX24q-4 32W, 42W 26W, 32W, 26W, 32W,

42W 42WBottom Screw-Down4-Hole 26725-411 White G24q-1 PL-C DULUX D/E DOUBLE

w/Black 10W, 13W 10W, 13W BIAX 10W, 13W4-Hole 26725-412 Green G24q-2 PL-C 18W DULUX D/E DOUBLE

18W BIAX 18W4-Hole 26725-413 Orange G24q-3, PL-C 26W DULUX D/E DOUBLE

GX24q-3 PL-T DULUX T/E BIAX 26W, 32W 26W, 32W 26W

4-Hole 26725-414 Yellow GX24q-4 PL-T 42W DULUX T/E PERFORMANCE42W BIAX 42W

4-Hole 26725-419 White G24q-3 PL-T 26W, DULUX T/E TRIPLE BIAX for Universal ballast only GX24q-4 32W, 42W 26W, 32W, 26W, 32W,

42W 42W

Note: Lamp names are trademarked by manufacturers

1.06

3 (2

7.0

)

1.40 (35.6)

0.68(17.3)

1.36 (34.6)

RECOMMENDED MOUNTINGHOLE PATTERN

4-Hole Bottom Screw-Down CFLs26725-213 Shown

0.68(17.27)

1.40(35.56)

1.40(35.56)

0.062(1.57)

0.560(14.22)

1.400(35.56)

0.360(9.14)

1.37(34.80)

0.15(3.81)

KEYWAY

0.267(6.78)

RECOMMENDED PANEL THICKNESS 18–20 GA.

Bottom Snap-In CFLs for 18–20 Ga Panels26725-421 Shown


• “Smart” CFL Lampholders are color-coded for easy wattage identification

• Bottom snap-in versions for easier panelassembly available for 16 Ga. and 18–20Ga. panels

• All 4-pin lampholders have internalrejection feature that prevents insertionof 2-pin lamps

• Metal-spring lamp-retainer clip providespositive lamp retention and is moredurable than plastic clips


• Four screw holes for greater mountingflexibility

• Wire-routing options for top or bottomside of mounting panel for easier assembly

• White thermoplastic body


• UL Listed (File #E-5833)• UL Listed for indoor and outdoor

applications when properly enclosed• CSA Certified (File #LR-1863)• NOM Certified (File #057)

1.29

(32.

7)

0.81

(20.

6)

1.00 (25.4)




75W 600V


1.40 (35.6)

1.51

(38

.4)

1.40

(35

.6)

1.37 (34.8)

0.24 (6.2)

KEYWAY

RECOMMENDED PANELTHICKNESS — 18–20 GA.

0.036-0.04726725-426

26725-416

26725-425

26725-406


• “Smart” CFL Lampholders are color-coded foreasy wattage identification

• Bottom Snap-In versions for easier panel assem-bly available for 16 Ga. and 18–20 Ga. panels

• All 4-pin lampholders have internal rejection feature that prevents insertion of 2-pin lamps

• Metal-spring lamp-retainer clip provides positivelamp retention

• Two wiring ports per contact speed harness wiring• Wire-routing options for top or bottom side of

mounting panel for easier assembly• Bodies are white thermoplastic (with color-coding

as indicated)• Quick-connect push-in wiring terminals accept

No. 18 AWG solid or twisted-and –overtinnedleads, stripped 3/8 inch


• UL Listed (File #E-5833)• UL Listed for indoor and outdoor applications

when properly enclosed• CSA Certified (File #LR-1863)• NOM Certified (#057)

10mm Compact Fluorescent Lampholders for High-Wattage LampsFor GX24q Lamp Bases, 4-Pin — Rating: 75 WATT 600VSuitable for Dimming or Electronic Ballasts URMOUNTING CAT. NO. COLOR LAMP OSRAM GE

BASE SYLVANIA LIGHTINGBottom Snap-In 26725-405 Blue GX24q-5 DULUX T/E BIAX Q/E for 16 Ga. Panels 57W 57W4-Hole Bottom 26725-415 Blue GX24q-5 DULUX T/E BIAX Q/E Screw-Down 57W 57W2-Hole Bottom 26725-4A5 Blue GX24q-5 DULUX T/E BIAX Q/E Screw-Down, 57W 57WRound BodyBottom Snap-In 26725-425 Blue GX24q-5 DULUX T/E BIAX Q/E for 18–20 Ga. Panels 57W 57WBottom Snap-In 26725-406 Red GX24q-6 — BIAX Q/E for 16 Ga. Panels 70W4-Hole Bottom 26725-416 Red GX24q-6 — BIAX Q/E Screw-Down 70W2-Hole Bottom 26725-4A6 Red GX24q-6 — BIAX Q/E Screw-Down, 70WRound BodyBottom Snap-In 26725-426 Red GX24q-6 — BIAX Q/E for 18–20 Ga. Panels 70W

1.40 (35.6)

1.40

(35

.6)

1.12

(28

.6)

0.81

(20

.6)

1.00 (25.4) 1.36 (34.5)

0.68 (17.3 )

KEYWAY

RECOMMENDED MOUNTING SCREW #8 SELF-CUTTING RECOMMENDED HOLE PATTERN

1.00 (25.4)

1.29 (32.7)

4-Hole Bottom Screw-Down CFLs26725-415 Shown

1.40 (35.6)

1.51

(38

.4)

1.40

(35

.6)

1.37 (34.8)

0.24 (6.2)

KEYWAY

RECOMMENDED PANELTHICKNESS — 18–20 GA.

0.036-0.047

Bottom Snap-In CFLs for 18–20 Ga Panels26725-426 Shown

1.40

(35

.6)

0.27 (6.8)

0.56 (14.2)

0.36 (9.1)

0.06 (1.6)

RECOMMENDED PANEL OPENING


Fluo

resc

ent

Lam

phol

ders

S22

75W 600V



1.40

(35

.6)

0.63

(1

5.9) KEYWAY

1.40 (35.6)

1.21

1.0(270.20

(5.2

0.94 (23.8)

Ø 0.14 (3.5)

Ø 0.25 (6.4)

Ø 1.33

(33.8

)

26725-4A5

26725-4A3

26725-4A2

10mm Compact Fluorescent Lampholders with Round BodiesFor G24d Lamp Bases, 2-Pin — Rating: 75 WATT 600VBottom Screw-Down Mounting URCAT. NO. COLOR LAMP PHILIPS OSRAM GE

BASE SYLVANIA LIGHTING26725-2A1 Black G24d-1 PL-C DULUX D DOUBLE BIAX

10W, 13W 10W, 13W 10W, 13W26725-2A2 Green G24d-2 PL-C, 18W DULUX D, 18W DOUBLE BIAX 18W

DULUX T, 18W26725-2A3 Orange G24d-3 PL-C, 26W DULUX D, 26W DOUBLE BIAX 26W

DULUX T, 26W

For G24q and GX24q Lamp Bases, 4-Pin — Rating: 75 WATT 600V Bottom Screw-Down Mounting — Suitable for Dimming or Electronic Ballasts URCAT. NO. COLOR LAMP PHILIPS OSRAM GE

BASE SYLVANIA LIGHTING26725-4A1 Black G24q-1 PL-C DULUX-D DOUBLE BIAX

10W, 13W 10W, 13W 10W, 13W TRIPLE BIAX 13W

26725-4A2 Green G24q-2 PL-C, 18W DULUX D, 18W DOUBLE BIAX, 18WGreen GX24q-2 PL-C, 18W DULUX T/E, 18W TRIPLE BIAX, 18W

26725-4A3 Orange G24q-3 PL-C, 26W DULUX D, 26W DOUBLE BIAX, 26WOrange GX24q-3 PL-T DULUX T/E TRIPLE BIAX

26W, 32W 26W, 32W 26W, 32W 26725-4A4 Yellow GX24q-4 PL-T, 42W DULUX T/E, 42W PERFORMANCE

BIAX 42W26725-4A5 Blue GX24q-5 — DULUX T/E, 57W BIAX Q/E, 57W26725-4A6 Red GX24q-6 — — BIAX Q/E, 70W26725-4A9 No color code G24q-3 PL-T DULUX T/E TRIPLE BIAXUniversal* White body GX24q-4 26W, 32W 26W, 32W, 26W, 32W, 42W

only 42W 42W

*For use with universal ballast onlyNote: Lamp names are trademarked by manufacturers

1.40

(35

.6)

0.63

(1

5.9) KEYWAY

1.40 (35.6)

1.21 (30.8)

1.09 (27.6)0.20

(5.2

0.94 (23.8)

Ø 0.14 (3.5)

Ø 0.25 (6.4)

Ø 1.33

(33.8

)

All Round-Body CFLs26725-4A5 Shown

1.13 (28.6)

0.94 (23.8)

34°

0.63

(1

5.9)

RECOMMENDED PANEL OPENING FOR ALLROUND-BODY CFLs


• “Smart” CFL Lampholders are color-coded for easy wattage identification

• All 4-pin lampholders have internalrejection feature that prevents insertionof 2-pin lamps

• Metal-spring lamp-retainer clip providespositive lamp retention and is moredurable than plastic clips


• Wire-routing options for top or bottomside of mounting panel for easier assembly

• Bodies are white thermoplastic (withcolor-coding as indicated)

• Quick-connect push-in wiring terminalsaccept No. 18 AWG solid or twisted-and–overtinned leads, stripped 3/8 inch


• UL Listed (File #E-5833)• UL Listed for indoor and outdoor appli-

cations when properly enclosed• CSA Certified (File #LR-1863)• NOM Certified (#057)


Date post:	19-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Lampholders - Steven Engineering · Features Lamp-Lock design for quick relamping. Models dedicated...

Documents