Landa SJ100A Parts Washer Manual

AUTOMATIC PARTS WASHERS

OPERATORS MANUAL

LANDA, INC. 4275 N.W. Pacific Rim Blvd. Camas, WA 98607 USAFor technical assistance or the Landa Dealer nearest you, call 800-LANDA-4-U (800-526-3248) or (360) 833-9100

or consult our web page at www.landa.com

SJ-100 SJ-150 SJ-250 SJ-350

FRONTLOADMODELSSJ

CONTENTS

3

Model Number ______________________________

Serial Number ______________________________

Date of Purchase ____________________________The model and serial numbers will be found on a decal attached tothe automatic parts washer. You should record both serial numberand date of purchase and keep in a safe place for future reference.

SJ Automatic Parts Washer Manual Form #96-6404 Revised 7/03

Introduction ................................................................................................................................... 4Important Safety Information ......................................................................................................4-5Electrical Safety ............................................................................................................................ 5Standard Safety Features ............................................................................................................. 5Installation .................................................................................................................................5-6Pre-Start Checklist ........................................................................................................................ 6Operating Instructions ................................................................................................................... 6Operations Diagram ...................................................................................................................... 7Options Identification .................................................................................................................8-9Maintenance ............................................................................................................................... 10Options ..................................................................................................................................10-11Exploded View, Left Side (SJ-100, SJ-150, SJ-250, SJ-350) ...................................................... 12Exploded View, Right Side (SJ-100, SJ-150, SJ-250, SJ-350) .................................................... 13Exploded View, Parts List (SJ-100, SJ-150, SJ-250, SJ-350) ................................................14-18Oil Skimmer Breakdown & Parts List .......................................................................................... 19Control Panel .............................................................................................................................. 20Control Panel Parts List .............................................................................................................. 21Vertical Seal-less Pump & Parts List ........................................................................................... 22Troubleshooting .....................................................................................................................23-24Specifications ............................................................................................................................. 25Warranty ..................................................................................................................................... 26

4 SJ AUTOMATIC PARTS WASHER OPERATORS MANUAL

LANDA SJ 100,150,250,350 96-6404 REV. 7/03

INTRODUCTIONThank you for purchasing a LANDA SJ Automatic PartsWasher.This manual covers the operation and maintenance ofthe SJ-100A, SJ-100B, SJ-100C, SJ-150A, SJ-150B,SJ-150C, SJ-250B, SJ-250C, SJ-350B and SJ-350CParts Washer. All information in this manual is basedon the latest product information available at the time ofprinting.LANDA, Inc. reserves the right to make changes at anytime without incurring any obligation.

Owner/User Responsibility:The owner and/or user must have an understanding ofthe manufacturers operating instructions and warningsbefore using this LANDA machine. Warning informationshould be emphasized and understood. If the operatoris not fluent in English, the manufacturers instructionsand warnings shall be read to and discussed with theoperator in the operators native language by the pur-chaser/owner, making sure that the operator compre-hends its contents.Owner and/or user must study and maintain for futurereference the manufacturers instructions.

This manual should be considered a permanentpart of the machine and should remain with it ifmachine is resold.

When ordering parts, please specify model andserial number.

IMPORTANT SAFETYINFORMATION

CAUTION: To reduce the risk of in-jury, read operating instructionscarefully before using.

1. Read the owner's manual thor-oughly. Failure to follow instruc-tions could cause a malfunctionof the parts washer and resultin death, serious bodily injuryand/or property damage.

WARNING: This is a heated partscleaner. Use only nonflammable,non-combustible, water-basedcleaning compounds in thismachine. Do not fill or contami-nate with any flammable or com-bustible material such as gaso-line, alcohol, mineral spirits, etc.Drain parts to be cleaned of anycombustible or flammable mate-

rial before placing inside cabinet. Failure to observethis warning will create an extremely hazardous con-dition.2. All installations must comply with local codes. Con-

tact your electrician, plumber, utility company or theselling distributor for specific details.

3. To protect the operator from electrical shock, the ma-chine must be electrically grounded. It is the respon-sibility of the owner to connect this machine to agrounded receptacle of proper voltage and amper-age ratings. Do not touch machine with wet handsor while standing in water. Always disconnect powerbefore servicing.

4. Never make adjustments on the machine while it isin operation, except those prescribed in this manual.

WARNING: Use extreme cautionwhen opening the door. Hot wa-ter/detergent vapors will be emit-ted. Stand Back!

5. Do not allow high concentra-tions of flammable fluids, acids,or caustics to be introduced intothis machine.

WARNING: Flammable liquidscan create fumes which can ignitecausing property damage or se-vere injury.

6. Do not locate this machine inthe vicinity of any flammablevapors, liquids or solids.

7. Before servicing the machine,refer to all MSDSs on the

material identified in the waste stream. You must com-ply with all warnings and wear all protective clothingstated on the MSDS.

8. When the machine is working, do not cover or placein a closed space where ventilation is insufficient.Avoid installing machines in small confined areas.

9. This parts washer will freeze if not in operation andmust be located in a heated enclosure in coldclimates.

WARNING

RISK OF EXPLOSION:DO NOT SPRAY

FLAMMABLE LIQUIDS.

WARNING

EXTREMELY HOT:USE CAUTION WHEN

OPENING LID.

WARNING

RISK OF EXPLOSION:DO NOT SPRAY

FLAMMABLE LIQUIDS.

WARNING

READ OPERATORSMANUAL THOROUGHLY

PRIOR TO USE.

CAUTION

SJ AUTOMATIC PARTS WASHER OPERATORS MANUAL 5

LANDA SJ 100,150,250,350 96-6404 REV. 7/03

10. Running this machine without water will damage theheating elements and will void the warranty.

WARNING: Eye protection, glovesand foot protection must be wornwhile loading and unloadingparts.11. Eye protection, gloves, foot pro-

tection and other safety devicesmust be worn when loading andunloading parts to be cleaned.

12. Use caution when lifting itemsin and out of parts basket to prevent back injuries.

13. Always ensure that your parts washer is clean. Pumpand heating elements could be damaged by contin-ued buildup of sludge.

14. Check water level daily. Never allow water level todrop below pump inlet screen or heating elements.

15. Before discarding the spent washing solution, checkwith your local EPA or sewer district for disposal regu-lations.

ELECTRICAL SAFETYWARNING: Ground equipmentbefore connecting to the electri-cal power supply. Failure toground equipment could result ina severe or fatal electrical shock.WARNING: Do not ground to agas supply line.WARNING: To avoid dangerous orfatal electric shock, disconnect

the power to the equipment before working on anyelectrical connection or making any repairs.WARNING: Supply voltage must be within 10% ofthe nameplate voltage. Incorrect voltage can causea fire or seriously damage the equipment and voidthe warranty. If in doubt, consult a licensed electri-cian.WARNING: Only connect the equipment to a dedi-cated circuit with no other equipment on it.Read electrical safety instructions thoroughly beforeoperating. Failure to follow this warning could cause se-vere injury or damage to personal property.

STANDARD SAFETY FEATURESThe SJ Parts Washer uses electricity to operate. Thiscan be fatal if not handled properly. For this reason, theSJ has been designed with safety in mind. The followingare standard safety features you will find.

1. One Hour Wash Timer and Indicator LightThis switch insures that the parts washer will turnoff the pump at a specific elapsed time.

2. Low Water Float Switch and Indicator LightThis float switch insures that there is water coveringthe heating element. Before the water level dropsand begins to expose the heating element, the lowwater float switch turns off the heaters and washpump and turns on the low water indicator light.

3. 7-Day Programmable Heater TimerConserves energy by turning heating elements onand off at operator set times, when machine is not inuse. Allows 3 hours for the machine to come up totemperature.

4. Spray Arm StopWhen the wash timer turns off, a hinged stop willdrop down to prevent the spray arm from spinningwhen the door is opened.

5. Temperature ControlThe high temperature control monitors the internaltemperature of the parts washer and maintains wa-ter temperature at prescribed set point.

INSTALLATION 1. Location-Locate the SJ Parts Washer on a level con-

crete surface in a room that is well ventilated. Pro-tect from damaging environments such as wind, rain,sun and freezing temperatures.

2. Electrical-This parts washer is designed for indooroperation. Refer to the serial plate for proper voltageand amp requirements. All electrical lines must betested with a voltage meter for proper voltage beforeconnecting.NOTE: Correct Rotation of Pump Motor - After con-necting electrical power to parts washer check forproper rotation of pump motor. Correct rotation isclockwise looking from the fan end of the motor. Fail-ure to check rotation and having the motor operatein a counterclockwise rotation will damage the pump.Damage will consist of the impeller coming loosefrom the motor shaft damaging the impeller, shaftseals and pump housing.CAUTION: All electrical lines must be installedonly by qualified personnel. All installations mustbe electrically grounded and conform to all localand National Electrical codes.The electrical connection is located on the rear ofthe control panel using a 1" knock-out. Electrical con-duit must be run all the way to the connection pointin accordance with local codes.

WARNING

PROTECTIVEEYEWEAR AND

CLOTHING MUSTBE WORN.

WARNING

HAZARDOUS VOLTAGECAN SHOCK, BURNOR CAUSE DEATH.GROUND SYSTEM

BEFORE CONNECTINGTO POWER SUPPLY.


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

3. Level the SJ Parts Washer by placing steel shims atcorners until level. Once level elevate front of ma-chine 1/4" to aid in draining top of door.

4. Obtain a detergent that is designed for parts washerapplications and that will be suitable for the partsbeing cleaned. The detergent must have anti-rustinhibitors added to keep the parts washer fromrusting.

5. Fill water tank just below the chip tray. Dissolve andmix the recommended detergent before pouring intowater tank.NOTE: The detergent must be thoroughly mixed be-fore adding to tank. To ensure detergent mixes prop-erly and does not foam, make sure machine is up tooperating temperature before adding any detergent.

6. Because of the amount of water/detergent vaporsemitted from this machine, an exhaust stack shouldbe attached to the top of the machine and ventedoutside. The stack is 6" flanged. A 6" vent, in a singlepiece design, should be installed in compliance withall local codes. If the stack has seams, the seamsmust be sealed with sealant to prevent moistureleaks.

PRE-START CHECKLISTFollow all pre-start procedures before attempting tostart the SJ-100A, B, C; SJ-150A, B, C; SJ-250B, Cand the SJ-350B, C. 1. Level the machine. Once level, elevate front of

machine 1/4". Anchor to floor. 2. Verify the voltage, then connect the electrical lines

to the machine. 3. Detergent and water have been added to water tank.

OPERATING INSTRUCTIONS 1. Voltage light should be illuminated if power supply is

connected. Low water light should be off when tankwater level is correct.

2. Push heater switch to timer position. The heaterswitch ON position will override the timer switch.Turn the heating element on by setting the 7-day pro-grammable heater timer. Set the timer by pulling outtrippers on dial to set desired heating element ON

times. Turn dial clockwise until the time of day is ad-jacent to time arrow. Heater light will illuminate whenheater element is ON. Allow about three hours forwater to reach operating temperature. In case ofpower failure, reset clock on timer.

3. Set adjustable thermostat (Optional) to the desiredtemperature. Suggested operating range is between130 to 170. The surface thermostat behind the con-trol panel is set at 170.NOTE: Most soaps work best between 140 to 165.

4. Push door latch down to open door and place theitems to be cleaned into the parts basket. Then closethe door and hook the latch to lock the door. To pre-vent lifting injuries, use caution when lifting parts inor out.

5. Rotate the wash timer dial to the desired time setpoint (numbers on the face of the timer are in minuteintervals). The wash cycle light will illuminate. Thissetting will vary with the degree and type of clean-ing.

6. To operate the optional skimmer, push the oil skim-mer switch to the timer position. Set timer on back ofcontrol panel by pulling out trippers on dial to setskimmer to come ON when heating elements areOFF. Oil will separate from water better as tem-perature cools.

7. The exhaust fan option is operated by turning theexhaust fan switch ON when the machine is oper-ating. This will prevent steam vapors from enteringthe room when the door is opened and increasingthe evaporation rate which requires fresh watermakeup that keeps wash water cleaner.


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

SJ-150/250OPERATIONS DIAGRAM

7 Day HeaterTimer

ChipBasket

Safety DoorSwitch

Indicator Light

Hour Meter

DoorLatch

Temperature Gauge(optional)

Auto Water Fill(optional)

DiscOil Skimmer

Steam Exhaust Fan(optional)

AdjustableThermostat

ExhaustFan

(optional)

24-Hour OilSkimmer Timer

(optional)

Drain Port

Water InletHose


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

SJ-100, SJ-150, SJ-250, SJ-350OPTIONS IDENTIFICATION

#21-242 (SJ-150)#21-246 (SJ-250/350)

Double BasketParts Option

Intermediate Spray BarUsed w/Double Basket

#21-281 (SJ-150)#21-283 (SJ-250)

PressureGaugeOption#21-290

Pressure Gauge0-100 PSI

Filtration SystemBag 36"

#21-249 (SJ-100)#21-232 (SJ-150)#21-233 (SJ-250)#21-225 (SJ-350)

Steam Exhaust Fan 200CFM#21-285

AdjustableHeight Spray Bar#21-280 (SJ-150)#21-283 (SJ-250)

Temperature Gauge50-500 Option

#21-522

Parts Tree 30"#21-272

#21-273 (SS)

AdjustableThermostat Option

#21-135


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

SJ-100, SJ-150, SJ-250, SJ-350OPTIONS IDENTIFICATION

Disc Oil Skimmer#21-204

#21-205 w/Timer#21-2051 w/Timer (SS)

#21-206

Small PartsBasket w/Lid

#21-140

Hour Meter#21-515

SJ-150

SJ-150

10" Additional LoadHeight Option(SJ-150/250XT) Scrub Tub & Bath

21-220

Waste Drum Evaporator#21-190

(Drum Not Included)


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

MAINTENANCECAUTION: Use protective gloves, goggles and anyother protective clothing required by law for chemi-cals mixed with the waste stream.This machine does not require a lot of maintenance, butit does require consistent maintenance. The frequencyof maintenance will vary depending on what is in thewater.General maintenance will consist of removal of sludgefrom the bottom of the wash tank and removal of anyfloating oil in the wash tank.WARNING: Shut down the parts washer and allow itto cool before performing any maintenance. Do notallow pump to run longer than 5 minutes withoutwater. Disconnect all hoses to allow water to drain.

Oil Removal:If you have floating oil in the wash tank that needs to beremoved, shut down the machine and let the oil float tothe top. Set oil skimmer timer to come on automaticallyor turn on oil skimmer manually. Let run for 30 minutes.

Sludge Removal:Remove the lower 3" pipe plug on the side of the ma-chine allowing all of the water to escape. Use a smallshovel to remove the residual sludge from the bottom ofthe tank. Removing the sludge and cleaning the floor ofthe SJ Parts Washer will greatly increase the life of theheating elements.CAUTION: Disposal of contaminated water mustcomply with local and federal EPA regulations.

Spray Arm:The spray nozzles should be checked regularly for ob-struction and cleaned by removing and inserting a probe.The spray arm nozzle angle on both spray arms shouldbe mounted in the same direction.

Filters:With the tank empty, clean the suction pump strainer. Ifyou have the strainer filter, turn off the parts washer andtwist the strainer basket off, remove the filter screen.Clean when pressure gauge shows a 10 PSI decreasefrom start up pressure.

OPTIONSAutomatic Water Fill #21-110The auto fill option consists of two float switches electri-cally connected to a solenoid valve, which is connectedto a fresh water supply line to add water automatically tomaintain the water level.

Polyester Bag Filtration System#21-249 (SJ-100) #21-232 (SJ-150)#21-233 (SJ-250) #21-225 (SJ-350)A 30 micron bag collects particles from recirculating washwater to keep wash water clean for a longer period oftime.

Small Parts Basket #21-140This basket is 12" x 6" x 5" and comes equipped with alid to accommodate small parts that would fall throughthe holes of the standard basket.

18KW, 3 Phase Heating Element #21-254460V, #21-258 230VFor continuous washing cycles where hot water tempera-tures must be maintained or faster heat up time is needed.

Wastewater Drum Evaporator #21-190The wash water will eventually have to be removed anddisposal must meet local regulations. If the regulationsrequire costly disposal then the wash solution can beplaced in a metal 55 gallon drum (not provided) and thisoption is attached to evaporate the water to decreasethe amount of waste water being disposed.

Automatic Oil Skimmer#21-205 w/Timer #21-204 w/o TimerWhen oily parts are cleaned the oil floats on top of thewash water and should be removed to improve cleaning.A stainless steel disc attracts this floating oil and scrapesit off into a customer supplied bucket. A 24 hour timerturns the skimmer on when water is calm.

Scrub Tub Option #21-220Scrub tub draws solution from the SJ-Tank. Which meansonly one solution tank needs to be maintained.

Double Basket with Spray Arm# 21-242 (SJ-150) #21-246 (SJ-250)Small parts can be cleaned in this double basket with aspray arm adjusted for close contact.Parts Tree, 25" #21-272 #21-273 (SS)Used to hold parts in place.


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

OTHER OPTIONS:#21-522 Temperature Gauge 50 - 500 F#21-2901 Pressure Gauge#21-515 Hour Meter#21-285 Steam Exhaust Fan, 200 CFM#21-249 (SJ-100) Polyester Bag Filtration System -

10 - 150 micron bags available#21-253 (SJ-100) Door, Stainless Steel#21-278 (SJ-100) Spray Bar, Adjustable Height#21-279 (SJ-100) Spray Bar, Intermediate Height#21-280 (SJ-150) Spray Bar, Adjustable Assy.#21-282 (SJ-250) Spray Bar, Adjustable Assy.#21-281 (SJ-150) Spray Bar, Intermediate Assy.#21-283 (SJ-250) Spray Bar, Intermediate Assy.#21-193 (SJ-350) Waste Water Evaporation System

(built-in feature 20,800W)#21-225 (SJ-350) Polyester Bag Filtration System -

10 to 150 micron bags available#21-259 (SJ-350) Door, Stainless Steel#21-276 (SJ-350) Spray Bar, Adjustable Height#21-277 (SJ-350) Spray Bar, Intermediate Height


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

14

2

10 11

4

12

54

5

7

7 6

9

8

87

1516

17

17 17

87

1

15

52

50

41

46

4543

4442

32

313040

39

55

38

3736

35

3334

333

1351

47

50

19

48

49

29

26

25

24

22

23

22

2021

33 53

33

27

28

18

SJ-100, SJ-150, SJ-250, SJ-350EXPLODED VIEWLEFT SIDE


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

For DetailSee Control

PanelIllustration

SJ-350Models

Only

59

63

60

62

61

64

6566

68

67

69

58

57

71

72

70

56

49

79

73

77

74

76

78

75

86

85

84

83

82

8180

SJ-100, SJ-150, SJ-250, SJ-350EXPLODED VIEWRIGHT SIDE


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

ITEM PART NO. DESCRIPTION QTY1 95-07701101 Assy, Door, SJ-100 1

95-077011011 Assy, Door, SJ-100 304S.S. (Opt.) 1

95-07701010 Assy, Door, SJ-150 195-07701038 Assy, Door, SJ-150, 304

S.S. (Opt.) 195-07701032 Assy, Door, SJ-150

50" (Opt.) 195-07701040 Assy, Door, SJ-150

50", S.S. (Opt.) 195-07702010 Assy, Door, SJ-250 195-07702065 Assy, Door, SJ-250, S.S. (Opt.) 195-07702056 Assy, Door, SJ-250, 50" (Opt.) 195-07702066 Assy, Door, SJ-250, 50"

S.S. (Opt.) 195-0770303 Assy, Door, SJ-350 195-07703031 Assy, Door, SJ-350, S.S. (Opt.) 1

2 95-07701029 Bracket, Door Switch Striker 195-077010291 Bracket, Door Switch Striker

S.S. (Opt.) 13 90-19984 Screw, 1/4"-20 x 3/4" NC, S.S. 84 10-5058 Label, Warning/Operating Inst. 15 90-50040 Clamp, Heavy Duty Latch 16 2-01199 Handle, Black, Door 17 90-19924 Screw 3/8" x 1-1/2" SOC, S.S. 28 90-40020 Washer 3/8" SAE,

Rubber Backed 29 90-2002 Nut, 3/8" ESNA 2

10 95-07701105 Assy, Side Wall Parts BasketSJ-100 1

95-077011051 Assy, Side Wall Parts BasketSJ-100 S.S. (Opt.) 1

95-07701028 Assy, Side Wall Parts BasketSJ-150 1

95-077010281 Assy, Side Wall Parts BasketSJ-150 S.S. (Opt.) 1

95-07702046 Assy, Side Wall Parts BasketSJ-250 1

95-077020461 Assy, Side Wall Parts BasketSJ-250 S.S. 1

SJ-100, SJ-150, SJ-250, SJ-350EXPLODED VIEW PARTS LIST

ITEM PART NO. DESCRIPTION QTY10 95-0770312 Assy, Side Wall Parts Basket

SJ-350 195-07703121 Assy, Side Wall Parts Basket

SJ-350 S.S. (Opt.) 111 95-07701104 Assy, Parts Basket, SJ-100 1

95-077011041 Assy, Parts Basket, SJ-100S.S. (Opt.) 1

95-07701027 Assy, Parts Basket, SJ-150 195-077010271 Assy, Parts Basket, SJ-150

S.S. (Opt.) 195-07702045 Assy, Parts Basket, SJ-250 195-077020451 Assy, Parts Basket, SJ-250

S.S. (Opt.) 195-0770305 Assy, Parts Basket, SJ-350 195-07703051 Assy, Parts Basket, SJ-350

S.S. (Opt.) 112 95-07701115 Seal, Mechanical, Door, SJ-1001

95-077011151 Seal, Mechanical, Door, SJ-100S.S. (Opt.) 1

95-07702023 Seal, Mechanical, DoorSJ-150/250 1

95-077020231 Seal, Mechanical, DoorSJ-150/250, S.S. (Opt.) 1

95-07702061 Seal, Mechanical, Door, 50"SJ-150/250 (Opt.) 1

95-077020611 Seal, Mechanical, Door, 50"SJ-150/250, S.S. (Opt.) 1

95-0770318 Seal, Mechanical, Door, SJ-350195-07703181 Seal, Mechanical, Door, SJ-350

S.S. (Opt.) 113 90-200412 Collar, 2-3/4" Bore, Split Clamp 1

90-2004121 Collar, 2-3/4" Bore, Split ClampS.S. (Opt.) 1

14 5-7009 Bearing, Door, All Models 215 2-011042 Trim, Molded w/Wiper Edge 1216 95-07701111 Bezel Tank, SJ-100 1

95-07701012 Bezel Tank, SJ-150 195-07702020 Bezel Tank, SJ-250 195-0770307 Bezel Tank, SJ-350 1


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

SJ-100, SJ-150, SJ-250, SJ-350EXPLODED VIEW PARTS LIST CONT.

ITEM PART NO. DESCRIPTION QTY17 95-07701123 Assy, Chip Tray, SJ-100 4

95-077011231 Assy, Chip Tray, SJ-100S.S. (Opt.) 4

95-07701024 Assy, Chip Tray, SJ-150 495-077010241 Assy, Chip Tray, SJ-150

S.S. (Opt.) 495-07702036 Assy, Chip Tray, SJ-250 495-077020361 Assy, Chip Tray, SJ-250

S.S. (Opt.) 495-0770320 Assy, Chip Tray, SJ-350 495-07703201 Assy, Chip Tray, SJ-350

S.S. (Opt.) 418 95-07701006 Assy, Tank, SJ-100 1

95-077010061 Assy, Tank, SJ-100 S.S. (Opt.) 195-07701054 Assy, Tank, SJ-150 195-077010541 Assy, Tank, SJ-150 S.S. (Opt.) 195-07702054 Assy, Tank, SJ-250 195-077020541 Assy, Tank, SJ-250 S.S. (Opt.) 195-07703502 Assy, Tank, SJ-350 195-077035021 Assy, Tank, SJ-350 S.S. (Opt.) 1

19 6-1015 Heater, 4500W, 240VSJ-100/150A 2

6-1015 Heater, 4500W, 240VSJ-150/250B,C 3

6-1017 Heater, 4500W, 480VSJ-100/150/250C 3

6-1020 Heater, 6000W, 240V, SJ-350B 36-1022 Heater, 6000W, 480V, SJ-350C 3

20 2-10942 Swivel, 1/2" MP x 3/4" GHF,w/Strainer 1

21 2-1024 Elbow, 1/2" Street Brass 122 2-10812 Bushing, 1" x 1/2" Black Poly 223 6-14018 Solenoid, Valve 120V 124 2-1024 Elbow, 1/2" Street 1

2-1006 Nipple, Close, 1/2" 125 2-004985 Cap, 2" Black Pipe 126 21-204 Disc Skimmer On/Off, (Opt.) 1

21-205 Disc Skimmer w/Timer, (Opt.) 121-2051 Disc Skimmer w/Timer

S.S. (Opt.) 1

ITEM PART NO. DESCRIPTION QTY26 21-206 Disc Skimmer On/Off, S.S. (Opt.)127 95-07702031 Assy, Basket, Strainer 1

95-077020311 Assy, Basket, StrainerS.S. (Opt.) 1

28 95-07701127 Assy, Cover, Strainer, SJ-100 195-077011271 Assy, Cover, Strainer, SJ-100

S.S. (Opt.) 195-07702035 Assy, Cover, Strainer

SJ-150/250/350 195-077020351 Assy, Cover, Strainer

SJ-150/250/350, S.S. (Opt.) 129 4-0505 Gauge, Therm., 50-500 (Opt.) 130 95-07701120 Assy, Spray Arm, SJ-100 2

95-077011201 Assy, Spray Arm, SJ-100S.S. (Opt.) 2

95-07701016 Assy, Spray Arm, SJ-150 295-077010161 Assy, Spray Arm, SJ-150

S.S. (Opt.) 295-07701036 Assy, Spray Arm, SJ-150

50", (Opt.) 295-077010361 Assy, Spray Arm, SJ-150

50", S.S. (Opt.) 295-07702030 Assy, Spray Arm, SJ-250 295-077020301 Assy, Spray Arm, SJ-250

S.S. (Opt.) 295-07702057 Assy, Spray Arm, SJ-250

50", (Opt.) 295-077020571 Assy, Spray Arm, SJ-250

50", S.S. (Opt.) 295-0770313 Assy, Spray Arm, SJ-350 295-07703131 Assy, Spray Arm, SJ-350

S.S. (Opt.) 231 4-01810050 Nozzle, 1/8", 5010, SJ-100 24

4-01810051 Nozzle, 1/8", 5010, SJ-100(Opt.) 24

4-01315050B Nozzle, 5015, Zip Tip, SJ-150 264-01315050S Nozzle, 5015, Zip Tip, SJ-150

S.S. (Opt.) 264-10330050B Nozzle, 5030, Zip Tip, SJ-250 264-10330050S Nozzle, 5030, Zip Tip, SJ-250

S.S. (Opt.) 26


LANDA SJ 100,150,250,350 96-6404 REV. 7/03


ITEM PART NO. DESCRIPTION QTY31 4-01350050 Nozzle, 5055, Zip Tip, SJ-350 36

4-01350050S Nozzle, 5055, Zip Tip, SJ-350S.S. (Opt.) 36

32 4-0139100 Holder, Nozzle, 1/8"SJ-100 (Opt.) 26

4-0139101S Holder, Nozzle, Zip Tip, 1/4"SJ-150/250, S.S. (Opt.) 26

4-0139101 Holder, Nozzle, Zip Tip, 1/4"SJ-350 36

4-0139101S Holder, Nozzle, Zip Tip, 1/4"SJ-350, S.S. (Opt.) 36

33 2-4042 Gasket, Spray Arm, SJ-100 42-4051 Gasket, Spray Arm

SJ-150/250/350 434 2-1208 Rotory Union Assy, SJ-100 1

2-4056 Quad Rings, Viton 22-1234 Rotory Union Assy

SJ-150/250/350 12-4062 O-Ring, Viton, SJ-150/250/350 1

35 2-11031 Adapter, 1/4" x 1/8", SJ-100 44-0139110 Adapter, Zip Tip, 1/4" Brass 4

36 4-02100005 Hose, 3/8" x 3" Wrap Coil1/4" Ends 2

37 95-07702006 Washer, Bearing, Large 138 5-7014 Bearing, Thrust, S.S. Balls 139 2-1233 Adapter, Bearing 416, S.S. 140 90-19984 Screw, 1/4"-20 x 3/4", S.S. 241 95-07701121 Assy, Spray Arm, Adjustable

SJ-100 (Opt.) 195-01701023 Assy, Spray Arm, Adjustable



SJ-350 (Opt.) 142 90-10211 Bolt, 3/8" x 2-1/2", Carriage

(Opt.) 243 95-07701128 Plate, Pump Pipe, SJ-100 1

95-077011281 Plate, Pump Pipe, SJ-100S.S. (Opt.) 1

95-0770325 Plate, Pump Outlet 1

ITEM PART NO. DESCRIPTION QTY43 95-07703251 Plate, Pump Outlet, S.S. (Opt.) 144 2-01040 Grommet, 2-5/16" Rubber 145 2-001364 Bushing, 2" x 1-1/2" 146 90-50037 Knob, 3/8" Adjustable

Spray Arm (Opt.) 247 2-4048 Gasket, Pump, 3/16", Neoprene 148 2-00147 Nipple, 1-1/4" x 6", Black Pipe 149 2-4058 Gasket, Cabinet, SJ-100 1

2-4046 Gasket, Cabinet, SJ-150 12-4047 Gasket, Cabinet, SJ-250 12-4059 Gasket, Cabinet, SJ-350 1

50 90-1802 Screw, 1/4"-20 x 3/4" Phil, S.S. 4651 2-01036 Washer Bearing Door 152 90-20056 Nut, 1/4"-20 Keps, S.S. 4653 95-07701018 Hub, Spray Arm Bearing 1

95-077010181 Hub, Spray Arm BearingS.S. (Opt.) 1

54 5-2388 Pump, Scot, 2 HP, 208/230V1 PH, SJ-100A 1

5-2388S Pump, Scot, 2 HP 208/230V1 PH, SJ-100, S.S. (Opt.) 1

5-2389 Pump, Scot, 2 HP, 230/460V3 HP, SJ-100B,C 1

5-2389S Pump, Scot, 2 HP, 230/460V3 HP, SJ-100, S.S (Opt.) 1

5-2390 Pump, Scot, 3 HP, 208/230V1 PH, SJ-150A 1

5-2390S Pump, Scot, 3 HP, 208/230V1 PH, SJ-150A, S.S. (Opt.) 1

5-2391 Pump, Scot, 3 HP, 230/460V3 PH, SJ-150B,C 1

5-2391S Pump, Scot, 3 HP, 230/460V3 PH, SJ-150B,C, S.S. (Opt.) 1

5-2392 Pump, Scot, 5 HP, 230/460V3 PH, SJ-250B,C 1

5-2392S Pump, Scot, 5 HP, 230/460V3 PH, SJ-250B,C, S.S. (Opt.) 1

5-2393 Pump, Scot, 7-1/2 HP, 230/460V3 PH, SJ-350 1


LANDA SJ 100,150,250,350 96-6404 REV. 7/03


ITEM PART NO. DESCRIPTION QTY54 5-2393S Pump, Scot, 7-1/2 HP, 230/460V

3 PH, SJ-350, S.S. (Opt.) 190-20056 Nut, 1/4" - 20 Keps, S.S. 4

55 90-20056 Nut, 1/4" - 20 NC Keps 456 95-07701103 Assy, Cabinet, SJ-100 1

95-077011031 Assy, Cabinet, SJ-100, 304S.S., (Opt.) 1

95-07701013 Assy, Cabinet, SJ-150 195-077010131 Assy, Cabinet, SJ-150

S.S. (Opt.) 195-07701033 Assy, Cabinet, SJ-150, 50" (Opt.)195-077010331 Assy, Cabinet, SJ-150, 50"

S.S. (Opt.) 195-07702015 Assy, Cabinet, SJ-250 195-077020151 Assy, Cabinet, SJ-250, S.S. 195-07702055 Assy, Cabinet, SJ-250, 50" (Opt.)195-077020551 Assy, Cabinet, SJ-250, 50"

S.S. (Opt.) 195-0770304 Assy, Cabinet, SJ-350 195-07703041 Assy, Cabinet, SJ-350

S.S. (Opt.) 157 2-1225 Pin, Spin, SJ-100, 416, S.S. 1

2-12251 Pin, Spin, SJ-100, 303S.S. (Opt.) 1

2-1235 Pin, Spin, SJ-150/250/350, 416S.S. 1

2-12351 Pin, Spin, SJ-150/250/350, 303S.S. (Opt.) 1

58 2-4041 O-Ring Spin Pin, SJ-100 12-4055 O-Ring Spin Pin

SJ-150/250/350 159 2-00295 Elbow, 1" x 3/4" Reducing

Black, SJ-100 195-03161055 Elbow, 1.5" Pipe, 90, Black

SJ-150/250 12-00305 Elbow, 2" FT x 1-1/2" MT

SJ-350 160 95-07702050 Stack Assy Exhaust Fan 161 90-102702 Bolt, 1/2" x 1-1/2" NC, Zinc 862 90-4004 Washer, 1/2" Flat SAE 1663 90-20082 Nut, 1/2" Hex, NC 8

ITEM PART NO. DESCRIPTION QTY64 2-4039 Gasket, Flange Exhaust 165 5-1511 Fan, Draft Inducer, D-3 166 4-02190090 Hose, 1" x 46" OAL, SJ-100 1

4-02190100 Hose, 1-1/2" x 53" OAL, SJ-15014-02190102 Hose, 1-1/2" x 60" OAL, SJ-25014-0219109 Hose, 2" x 67" OAL, SJ-350 1

67 6-0802 Switch Micro w/Roller 168 90-126 Screw, 10/32" x 2-1/2" 269 95-07701114 Bezel, Top, SJ-100 1

95-07701014 Bezel, Top, SJ-150 195-07702022 Bezel, Top, SJ-250 195-07703 Bezel, Top, SJ-350 1

70 90-1802 Screw, 1/4"-20 x 3/4", Phil 1271 90-18101 Screw, 5/16"-24 x 3/8"

Soc. Set, S.S. 472 95-07701117 Bracket, Gasket Holder

SJ-100 Only 173 2-011042 Trim, Molded w/Wiper Edge 774 95-07701116 Mechanical Seal, SJ-100 1

95-077011161 Mechanical Seal, SJ-100S.S. (Opt.) 1

75 95-07701113 Bezel, Front, Left, SJ-100 195-07701015 Bezel, Front, Left, SJ-150 195-07701034 Bezel, Front, Left, SJ-150

50" (Opt.) 195-07702021 Bezel, Front, Left, SJ-250 195-07702059 Bezel, Front, Left, SJ-250

50" (Opt.) 195-0770310 Bezel, Front, Left, SJ-350 1

76 95-07701060 Retainer, Latch, SJ-Cab 177 95-07702011 Assy, Bracket & Brush, SJ-Cab 1


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

ITEM PART NO. DESCRIPTION QTY78 95-07701112 Bezel, Front, Right, SJ-100 1

95-07701021 Bezel, Front, Right, SJ-150 195-07701035 Bezel, Front, Right, SJ-150

50" (Opt.) 195-07702025 Bezel, Front, Right, SJ-250 195-07702058 Bezel, Front, Right, SJ-250

50" (Opt.) 195-0770309 Bezel, Front, Right, SJ-350 1

79 90-1996 Screw, 3/8" x 3/4", Whiz Loc 1280 2-001306 Nipple, 1-1/2" x Close, Blk. Pipe 1

2-008011 Nipple, 2" x CloseBlack Pipe, SJ-350 1

81 2-10641 Nipple, 1" Male JIC x 1" MPTSJ-100 1

2-10638 Nipple, 1-1/2" Male JIC x1-1/2" MPT, SJ-150/250 1

82 2-003672 Tee, 1-1/2" FM, Black PipeSJ-100/150/250 1

2-003675 Tee, 2" FM, Black Pipe,SJ-350 1


ITEM PART NO. DESCRIPTION QTY83 21-290 Pressure Gauge Assy. Option 1

2-001365 Bushing, 1 1/2" x 1/2" 14-05042 Gauge, Pressure, 0-100 PSI 1

84 2-00304 Elbow, 2" Street, Black PipeSJ-350 1

85 2-1960 Strainer, 1-1/2" 30 MeshSJ-100/150/250 1

2-1961 Strainer, 2" 30 Mesh, SJ-350 186 2-002001 Nipple, 1-1/2" x 10" Black Pipe

SJ-100/150/250 12-001446 Nipple, 2" x 36" Black Pipe

SJ-350 187 5-7013 Bearing, Spray Arm,

SJ-100,150,250,350 1


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

ITEM PART NO. DESCRIPTION QTY1 90-1991 Screw, 10/32" x 1/2"

BH, SOC, Blk 290-19996 Screw, 10/32" x 1/2"

BH, SOC, SS 22 95-0749201 Cover, Motor, Disc Skimmer 1

95-07492011 Cover, Motor,Disc Skimmer SS Opt. 1

3 90-100010 Screw, 10/32" x 1/2"Slot Pan MS, SS 4

90-100010 Screw, 10/32" x 1/2"Slot Pan SS 4

4 95-0749204 Blade, Wiper, Disc Skimmer SS 2

ITEM PART NO. DESCRIPTION QTY5 90-200012 Nut, 1/4" Flange, ZN 46 95-0749200 Assy, Frame, Disc Skimmer 1

95-07492001 Assy, Frame,Disc Skimmer SS Opt. 1

7 90-2018 Nut, Cage, 10/32" x 16 GA 28 6-05159 Connector, 1/2" L/T Strt Blk 29 6-0128 Conduit, WTR, Tight, Flex, 1/2" 6

10 5-1097 Motor, Disc Skimmer 111 95-0749203 Hub, Disc Mount, Disc Skimmer112 90-500342 Pin, Roll 1/8" x 1" Steel 113 95-0749202 Disc, Disc Skimmer SS 1

1

2

43

3

5

77

68

5 5

9

10

10

Box WeldedTo Rear OfMain Tank

12

11

13

3

OIL SKIMMER BREAKDOWN


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

SJ-100, SJ-150, SJ-250, SJ-350CONTROL PANEL

3

5

428

11

24

22

2326

25

6

19

21

2018

9

3

7

6

27 8

2

1

3

10

10

15

13

14

12

17

16


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

SJ-100, SJ-150, SJ-250, SJ-350CONTROL PANEL PARTS LIST

ITEM PART NO. DESCRIPTION QTY1 6-020530 Light, Indicator, Green, 125V 72 6-020253 Switch, Curvette, On-Off-On 43 4-05090 Thermostat, Gen. 175 (Opt.) 14 6-03731 Timer, 7 Day Pin 120V, 60 HZ

(A,B,C) 15 6-0373 Timer, 24 Hr. Pin 120V (Opt.)6 6-0379 Timer, Spring Wound 60 min. 1

6-037910 Knob, 1 Hour Timer 17 4-050822 Hour Meter 115V (Optional) 18 6-0507 Terminal Grounding Lug 19 6-1015 Heater 4500 Watt 230V, SJ-

100A,B, SJ-150A,B, SJ-250B(A Models) 2(B Models) 3

6-1017 Heater 4500 Watt 460VSJ-100, SJ-150, SJ-250 3

6-1020 Heater, 6000 Watt 240VSJ-350B 3

6-1022 Heater 6000 Watt 480VSJ-350C 3

10 6-0393 Switch, Liquid Level 211 6-021595 Din Rail 10"12 90-2006 Nut, 5/16" Hex NC 1213 95-07701125 Cover, Elec. Box SJ-100 1

95-077011251 Cover, Elec. Box SS SJ-100 195-07702040 Cover, Elec. Box SJ-150,

SJ-250, SJ-350 195-077030502 Cover, Elec. Box SS SJ-150,

SJ-250, SJ-350 114 2-01198 Handle, Elec. Box, Cover 215 90-1991 Screw, 10/32" x 1/2" Blk 1216 90-2018 Nut, Cage, 10/32" x 16 GA 1417 6-021612 Block, Power Distr. 118 6-4007 Contactor, CH 120V, SJ-100A,

150A, 250B 16-4000 Contactor, CH 120V,

SJ-100B,C, SJ-250C 1

ITEM PART NO. DESCRIPTION QTY18 6-4010 Contactor, CH 120V, SJ-350B 1

6-4004 Contactor, CH 120V, SJ-350CSJ-150B 1

19 6-5007 Overload Relay, 4.5-6.5 Amps,CH, SJ-100B, SJ-150C,SJ-250C 1

6-5005 Overload Relay. 2.8 - 4.0 Amps,CH, SJ-100C 1

6-5009 Overload Relay, 7.5-11 Amps,CH, SJ-150B, SJ-350C 1

6-5010 Overload Relay, 10-14 Amps,CH, SJ-250B

6-5012 Overload Relay, 18-24 Amps,CH, SJ-350B 1

20 6-4013 Contactor, CH, 120VAll Models 1

21 6-60051 Transformer, 240/460 - 120/240,200 KVA (A,B,C) 1

22 6-03621 Relay, 120V RH2B -UL -AC120 123 6-03541 Base, Relay Idec 124 6-0504 Block, Terminal 4 Pole 125 6-03565 Block, Fuse, GE 126 6-02320 Fuse, FNM, 2.5 Amp SJ-100,

SJ-150, SJ-250, SJ-350 16-022992 Fuse, ATMR 4 Amp 600V

All Models 227 10-5084 Label, Control Panel SJ-100 1

10-5070 Label, Control Panel SJ-150,SJ-250, SJ-350 1

28 6-0515582 Strain Relief, Liquid Tite Small 1


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

ITEM PART NO. DESCRIPTION QTY4 88-113000867 Motor, 5 HP, 208/230/460V,

3PH 188-113000886 Motor, 7.5 HP, 208/230/460V,

3 PH 15 88-118000111A Impeller Retainer 16 88-102000102 Key 17 88-132000290 Adapter 18 88-101000244 Lip Seal 19 88-110000348 Throttle Bushing 1

10 88-132000292 Mounting Plate, Cast Iron 188-110000545 Repair Kit

Included in Repair Kit

VERTICAL SEAL-LESS PUMP#5-2388 (2 HP 1 PH) #5-2389 (2 HP 3 PH) #5-2390 (3 HP 1 PH)#5-2391 (3 HP 3 PH) #5-2392 (5 HP 3 PH) #5-2393 (7.5 HP 3 PH)

ITEM PART NO. DESCRIPTION QTY1 88-130000181X Case, Cast Iron, 3 HP 1

88-130000344 Case, Cast Iron, 5/7.5 HP 12 88-137000127 Impeller, 5.5" Cast Iron, 3 HP 1

88-137000135 Impeller, 5.38" Cast Iron,5/7.5 HP 1

88-137000135X Impeller, 5.63" Cast Iron,7.5 HP 1

3 90-2007 Nut 3/8" Hex NC 44 88-113001338 Motor TCV, 3 HP 115/230V,

1PH 188-137000547 Motor, 3 HP, 208/230/460V,

3 PH 1

2

10

1

6

5

7

8

94

3


TROUBLESHOOTING

LANDA SJ 100,150,250,350 96-6404 REV. 7/03

PROBLEM POSSIBLE CAUSE SOLUTION

HEATER ELEMENTSWON'T HEAT UP/ORHEATS UP TOOSLOWLY

Line voltage too low Check with power company; install heavierwire. See wiring instructions.

Low water level Add water.Sludge buildup on floor of tank Scrape sludge and remove from tank.Heater lead wire does not have goodconnection

Reattach heater lead wires.

Heater element burned out Check ohms at element - replace if necessaryHEATER MAGNETICSTARTER/RELAYWON'T ENGAGE

Recheck timer for proper setting andoperation

Reset timer.

Low water level Add water.Temperature controller setting too low Increase temperature controller setting.Fuse blown on transformer Replace fuse.Low water switch not working Replace or clean.Starter/Relay defective Replace starter/relay.

HEATING ELEMENTSWON'T SHUT DOWN ATLOW WATER

Low water switch does not shut downheater magnetic starter/relay Check low water switch for proper operation.

PUMP MOTOR WILLNOT RUN

Wash timer switch is off Be sure switch is on.Overload switch tripped Allow 15 minutes for motor to cool down.

Overload will automatically reset.Low water switch. Add water check low water switch.Wash timer switch is defective Replace switch.Door open, not depressing safetyswitch

Close door.

Wires at motor are loose,disconnected, or wired incorrectly

Refer to instructions on wiring. Check andtighten all wiring.

Coil on magnetic starter/relaydefective

Check power to coil and replace magneticstarter/relay.

Door safety switch defective Replace switch.No power Check incoming power.Low line voltage If voltage under recommended minimum,

check size of wiring from main switch to partswasher. If OK, contact power company.

Defective motor Replace motor.PUMP MOTOR RUNSHOT AND OVERLOADKICKS OFF

Motor is wired incorrectly Refer to instructions on wiring.Voltage is too low Check with power company; install heavier

wiring if wire size is too small. See wiringinstructions.

Pump cycles too frequently Check door safety switch for properdepression, readjust if needed for properoperation.


TROUBLESHOOTING

LANDA SJ 100,150,250,350 96-6404 REV. 7/03

PROBLEM POSSIBLE CAUSE SOLUTION

PUMP MOTOR RUNSBUT NO WATER ISDELIVERED

Air lock. Pump has lost its prime Re-prime (3 or 4 times may be needed) bystopping and starting motor several times.

Air leaks Check all connections on suction line andshaft seal.

Water level below suction of pump Fill tank with water.Jet or impeller is plugged Clean jet or impeller, see Maintenance.Pump inlet strainer plugged Clean or remove sludge from strainer.Hoses are frozen Thaw out hoses.

SPRAY ARM WON'TSPIN

Low water temperature Allow water to heat to operating temperature.

Strainer clogged Clean strainer screen.Spin pin out of alignment Re-align spin pins.

PUMP STARTS ANDSTOPS TOO OFTEN

Low line voltage If voltage under recommended minimum,check size of wiring from main switch to partswasher. If OK, contact power company.

Clogged impeller Remove housing, unclog.Faulty motor overload protector Replace overload.

PUMP OPERATING,BUT DELIVERS LITTLEOR NO WATER

Low line voltage If voltage under recommended minimum,check size of wiring from main switch to partswasher. If OK, contact power company.

Fouled suction screen Clean, repair or replace as needed.Worn or defective pump parts orplugged impeller

Replace worn parts or entire pump. Cleanparts if required.

Pump air locked Turn pump On-Off several times, fill hosemanually with water.

Spray bar nozzles plugged Clean or replace.IMPELLER Impeller is loose on shaft Tighten impeller set screw.

Impeller rubs housing Realign impeller.Impeller wobbles or is damaged Replace impeller.Pump motor rotation is in the wrongdirection

Change rotation by following the wiringdiagram on the motor and changing wires tochange rotation.

VOLTAGE LIGHT FAILSTO COME ON

No power to parts washer Check circuit breaker supplying power towasher.

Fuse blown on transformer Replace fuse.Transformer defective Replace transformer.


LANDA SJ 100,150,250,350 96-6404 REV. 7/03

SPECIFICATIONS

MODEL SJ-100A, B, C SJ-150A, B, C SJ-250B, C SJ-350B, C

Load Capacity 1,000 lbs. (454 kg) 1,500 lbs. (681 kg) 1,500 lbs. (681 kg) 2,000 lbs. (909 kg)

Load Height 36" (91 cm) 40" (102 cm) 40" (102 cm) 60' (152 cm)

Basket Dimensions 24" Dia. (61 cm) 30" Dia. (76 cm) 36" Dia. (91 cm) 42" Dia. (107 cm)

Tank Capacity 85 gal. (321 L) 104 gal. (393 L) 140 gal. (529 L) 175 gal. (662 L)

Water Pump 2 hp VerticalSeal-less Cast Iron30 gpm 45 psi(113 lpm 3 bar)See Options

3 hp VerticalSeal-less Cast Iron50 gpm 50 psi(289 lpm 4 bar)See Options

5 hp VerticalSeal-less Cast Iron100 gpm 50 psi(378 lpm 3 bar)See Options

7.5 hp VerticalSeal-less Cast Iron125 gpm 45 psi(473 lpm 3 bar)See Options

Water Heater 9 KW Incoloy Alloy 9 KW 1 ph 45 amps.See Options

13.5 KW incoloy alloy.See Options

18 KW Incoloy Alloy

Operating Temperature 180 F (82o C) Max. 180 F (82o C) Max 180 F (82o C) Max 180 F (82o C) Max

Electrical 230V 1 PH 23 AmpSee Options

230V 1 PH 45 Amps.See Options

230V 3 PH 42 Amps.See Options

230V 3 PH 60 AmpSee Options

Cabinet DimensionsW x H x D

41" x 72" x 52"(104 x 182 x 132 cm)

47" x 80" x 57"(119 x 203 x 144 cm)

54" x 80" x 63"(137 x 203 x 160 cm)

62" x 100" x 72"(157 x 254 x 182 cm)

Dry Weight 900 lbs. (409 kg) 1150 lbs. (522 kg) 1250 lbs. (568 kg) 2075 lbs. (943 kg)

Shipping Weight 1050 lbs. (477 kg) 1225 lbs. (556 kg) 1325 lbs. (602 kg) 2150 lbs. (977 kg)

Amperage Conversion

Watts

Volts Single PhaseVolts 3 Phase

Balanced Load

Watts120 240 480 240 480

4500 37.5 18.8 9.38 10.84 5.42 4500

5000 41.7 20.8 10.42 12.1 6.1 5000

6000 50.0 25.0 12.50 14.50 6.1 6000

Ratings of Listed Heater VoltagesOperated On Other Voltages

KwRating

ofHeater

120 Volts 240 Volts 480 Volts

Output Kw of Heater When Operated On:

110Volts

115Volts

208Volts

220Volts

230Volts

440Volts

460Volts

4.5 3.78 4.13 3.38 3.78 4.14 3.78 4.14

5.0 4.20 4.59 3.5 4.2 4.6 4.2 4.6

7.5 6.30 6.89 5.6 6.3 6.9 6.3 6.9

Kilowatt Hours to Heat WaterAmount of Liquid Temperature Rise oF

20o 40o 60o 80o 100o 120o 140o

Cubic Ft. Gallons Kilowatts to heat in one hour 4.0 30 1.6 3.2 4.8 6.4 8 9.6 12 5.3 40 2.1 4 6.4 8.5 11 13 15

6.7 50 2.7 5.4 8 10.7 13 16 19

8.0 60 3.3 6.4 9.6 12.8 16 19 22

9.4 70 3.7 7.5 11.2 15 19 22 26

10.7 80 4.3 8.5 13 17 21 26 30

12.0 90 5 10 14.5 19 24 29 34

13.4 100 5.5 11 18 21 27 32 37

16.7 125 7 13 20 27 33 40 47


AUTOMATIC PARTS WASHERS

LANDA LIMITED NEW PRODUCT WARRANTYSJ AUTOMATIC PARTS WASHERS (SJ Series)

WHAT THIS WARRANTY COVERSAll LANDA SJ automatic parts washers are warranted by LANDA, INC. to the original purchaser to be free from defects inmaterials and workmanship under normal use, for the periods specified below. This Limited Warranty, subject to the exclusionsshown below, is calculated from the date of the original purchase, and applies to the original components only. Any partsreplaced under this warranty will assume the remainder of the parts warranty period.

ONE YEAR PARTS AND ONE YEAR LABOR WARRANTY:All components and accessories excluding normal wear items as described below.

WARRANTY PROVIDED BY OTHER MANUFACTURERS:Motors, which are warranted by their respective manufacturers, are serviced through these manufacturers local authorizedservice centers. LANDA cannot provide warranty on these items.

WHAT THIS WARRANTY DOES NOT COVERThis warranty does not cover the following items:

1. Normal wear items, such as nozzles, seals, filters, gaskets, O-rings, fuses, oil-skimmer belts, calrods.2. Damage or malfunctions resulting from accidents, abuse, modifications, alterations, incorrect installation, improper

servicing, failure to follow manufacturers maintenance instructions, or use of the equipment beyond its stated usagespecifications as contained in the operators manual.

3. Damage due to freezing, chemical deterioration, scale buildup, rust, or corrosion.4. Damage to components from fluctuations in electrical or water supply.5. Normal maintenance service, including adjustments, system cleaning, and clearing of obstructions.6. Transportation to service center, field labor charges, or freight damage.

WHAT YOU MUST DO TO OBTAIN WARRANTY SERVICEWhile not required for warranty service, we request that you register your LANDA Product by returning the completed registra-tion card. In order to obtain warranty service on items warranted by LANDA, you must return the product to your AuthorizedLANDA Dealer, freight prepaid, with proof of purchase, within the applicable warranty period. If the product is permanentlyinstalled, you must notify your Authorized LANDA Dealer of the defect. Your Authorized LANDA Dealer will file a claim withLanda, who must subsequently verify the defect. In most cases, the part must be returned to LANDA freight prepaid with theclaim. For warranty service on components warranted by other manufacturers, your Authorized LANDA Dealer can help youobtain warranty service through these manufacturers local authorized service centers. If you are unable to resolve the warrantyclaim satisfactorily, write to LANDA at 4275 N.W. Pacific Rim Blvd., Camas, WA 98607, ATTN: Warranty Dept., detailing thenature of the defect, the name of the Authorized LANDA Dealer, and a copy of the purchase invoice.

LIMITATION OF LIABILITYLANDAS liability for special, incidental, or consequential damages is expressly disclaimed. In no event shall LANDAS liabilityexceed the purchase price of the product in question. LANDA makes every effort to ensure that all illustrations and specifica-tions are correct, however, these do not imply a warranty that the product is merchantable or fit for a particular purpose, or thatthe product will actually conform to the illustrations and specifications. THE WARRANTY CONTAINED HEREIN IS IN LIEU OFALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS FOR A PAR-TICULAR PURPOSE. LANDA does not authorize any other party, including authorized LANDA Dealers, to make any represen-tation or promise on behalf of LANDA, or to modify the terms, conditions, or limitations in any way. It is the buyers responsibilityto ensure that the installation and use of LANDA products conforms to local codes. While LANDA attempts to assure that itsproducts meet national codes, it cannot be responsible for how the customer chooses to use or install the product.

LANDA SJ 100,150,250,350 96-6404 REV. 7/03

4275 NW Pacific Rim Blvd. Camas, WA 98607 USA

Form #96-6404 Revised 7/03 Printed in U.S.A. by Landa, Inc., Camas, WA 98607

WATER CLEANING SYSTEMS

Date post:	22-Sep-2015
Category:	Documents
Upload:	neal-bratt
View:	297 times
Download:	11 times

Landa SJ100A Parts Washer Manual

Documents