1
Large Rotary Tables Handle large, heavy workpieces with 4 axis versatility High load capacity due to rigid axial radial roller bearings Can be configured for vertical or horizontal usage Can be setup as full 4th axis or as an indexer Item/Model No. DR-1000R DR-1250R DR-1500R DR-2000R DR-1500R Diameter of Table Diameter of Thru-hole Center Height in Vertical Overall Height in Vertical Overall Height in Horizontal Width of T Slot Width of Guide Block Servo Motor Type Total Reduction Ratio MIN. Increment Clamping Torque Indexing Accuracy Repeatability Accuracy N.W. MAX. Work Load MAX. Thrust Load Driving Torque MAX. Rotation Speed(Motor:2000 RPM) Large Rotary Tables Unidirectional Bidirectional Vertical Horizontal F (Axial Force) FxL (Tilting Moment) FxL (Radial Moment) mm / inch mm / inch mm / inch mm / inch mm / inch mm mm FANUC MITSUBISHI SIEMENS HEIDENHAIN deg. RPM kgf•m / ft•lb sec. sec. kg / lbs 2000 / 4410 4000 / 8818 6500 / 14,330 8000 / 17,637 10000 / 22,046 kg / lbs 1000 / 2205 2000 / 4409 3000 / 6614 4000 / 8818 4500 / 9920 6000 / 13,228 8000 / 17,637 10,000 / 22,046 11,000 / 24,250 5000 / 11,023 10,000 / 22,046 15,000 / 33,069 20,000 / 44,092 21000 / 15,189 2600 / 18,805 3500 / 25,315 3500 / 25,315 5000 / 11,023 2800 / 6173 1500 / 10,850 2250 / 16,274 3150 / 22,784 3900 / 28,208 5250 / 37,973 5250 / 37,973 kg / lbs kgf / lbf kgf•m / ft•lb kgf•m / ft•lb kgf•m / ft•lb 400 / 2893 500 / 3617 580 / 4195 700 / 5063 875 / 6329 Hydraulic System:35kg/cm2 Ø1000 / 39.37” Ø1250 / 49.21” Ø1500 / 59.05” Ø2000 / 78.74” Ø2500 / 98.42” Ø400 / 15.74” - - - - 600 / 23.62” 810 / 31.89” 900 / 35.43” 1100 / 43.30” 1375 / 54.13” 1100 / 43.31” 1435 / 56.50” 1650 / 64.96” 2100 / 82.68” 2625 / 103.35” 400 / 15.75” 600 / 23.62” 700 / 27.56” 720 / 28.35” 900 / 35.43” 22 H7 22 H7 α30i α30i α30i α40i α40i HF-453 1FK7103 QSY190C 1:360 1:720 1:720 1:720 1:900 0.001° 5.5 2.7 2.7 2.7 2.7 2600 / 18,805 3030 / 21,916 3700 / 26,762 6200 / 44,844 12,000 / 86,796 10”( w/ RON275 ) 10”( w/ RON275 ) 10”( w/ RON275 ) 10”( w/ RON275 ) 10”( w/ RON275 ) 0.001° 0.001° 0.001° 0.001° QSY190C QSY190C QSY190F QSY190F 1FK7103 1FK7103 1FK7105 1FK7105 HF-453 HF-453 HF-703 HF-703 22 H7 28 H7 36 h7 36 h7 28 H7 28 H7 22 H7 22 H7 Based on Encoder Phone: 513.770.4200 Fax: 513.701.5551 www.CNCIndexing.com [email protected]
