LASE 2018 CALL FOR PAPERS - SPIEspie.org/Documents/ConferencesExhibitions/LASE17-Call...Alan H....

LASE

CA

LL F

OR

PA

PE

RS

www.spie.org/LASE18call

27 January-1 February 2018The Moscone Center San Francisco

CALL FORPAPERS

LASE 2018

Submit abstracts by 17 July 2017

Present your work at LASE 2018The industrial laser, laser source, and laser application conference

Technologies• Micro/Nano Applications

• Macro Applications


Conferences and Courses 27 January–1 February 2018

Two Exhibitions BIOS EXPO: 27–28 January 2018 Photonics West: 30 January–1 February 2018

The Moscone Center San Francisco, California, USA

Submit abstracts by 17 July 2017

• Laser Sources

• Nonlinear Optics and Beam Guiding

Symposium Chairs:

Symposium Co-Chairs:

SPIE LASE has developed into the main forum and meeting place for not only laser science and laser scientists, but also for novel laser applications and laser process engineers. The main communities participating in LASE are technology innovators reporting their latest developments and research discoveries.

Participation from academia is stable, and we have seen increasing participation from benefiting industries like microelectronics, computers, machine tools, and classical industries including automotive and manufacturing. LASE increasingly addresses business closer to the end user, closing the gap from bottom up competency oriented novelties and new science to market driven visions of new societal benefits from the point of view of the end user.

Consequently, we seek scientific contributions, new research results, and presentations that include perspectives for applications or even direct applicability to existing and new industries. The more the authors accept and fulfill this request, the more successful LASE will become because the impact of new science on innovation and new markets will be visible and become directly feasible.

We reach out to scientists to showcase their latest additions in the ever-growing toolbox of laser capabilities and to the representatives of the industrial R&D sector to help communicate to fundamental scientists the demands of emerging industrial and social applications.

We look forward to innovating LASE by disseminating relevant research contributions for more effective impact on our everyday life in the societies around the world.

Present your research at SPIE LASE 2018.

Koji Sugioka RIKEN (Japan)

Reinhart PopraweFraunhofer-Institut für Lasertechnik (Germany)

Xianfan Xu Purdue Univ. (USA)

Plan to Participate

Beat NeuenschwanderBerner Fachhochschule Technik und Informatik (Switzerland)

EXECUTIVE ORGANIZING COMMITTEE

LASE, THE INDUSTRIAL LASER, LASER SOURCE, AND LASER APPLICATION CONFERENCE

Udo Klotzbach, Fraunhofer IWS Dresden (Germany)Alexis V. Kudryashov, Institute of Atmospheric

Optics (Russian Federation)Paul O. Leisher, Lawrence Livermore National Lab.

(USA)Jian Liu, PolarOnyx, Inc. (USA)Tetsuya Makimura, Univ. of Tsukuba (Japan)Ecole Polytechnique de Montréal (Canada)Beat Neuenschwander, Berner Fachhochschule

Technik und Informatik (Switzerland)Roberto Osellame, CNR-Istituto di Fotonica e

Nanotecnologie (Italy)Alan H. Paxton, Air Force Research Lab. (USA)Alberto Piqué, U.S. Naval Research Lab. (USA)Gediminas Račiukaitis, Ctr. for Physical Sciences

and Technology (Lithuania)Kenneth L. Schepler, CREOL, The College of Optics

and Photonics, Univ. of Central Florida (USA)J. Thomas Schriempf, Naval Sea Systems

Command (USA)Ramesh K. Shori, SPAWAR Systems Ctr. (USA)Daniel R. Solli, Univ. of California, Los Angeles

(USA) and Georg-August-Univ. Göttingen (Germany)

Günter Steinmeyer, Max Born Institute for Nonlinear Optics and Short Pulse Spectroscopy (Germany)

Konstantin L. Vodopyanov, CREOL, The College of Optics and Photonics, Univ. of Central Florida (USA)

Kunihiko Washio, Paradigm Laser Research Ltd. (Japan)

Mark S. Zediker, Nuburu Inc. (USA)

Lutz Aschke, TRUMPF Lasertechnik GmbH (Germany)John Ballato, Clemson Univ. (USA)Don M. Boroson, MIT Lincoln Lab. (USA)Linyou Cao, North Carolina State Univ. (USA)Adrian L. Carter, Nufern (USA)Juan L. Chilla, Coherent, Inc. (USA)W. Andrew Clarkson, Univ. of Southampton

(United Kingdom)Steven J. Davis, Physical Sciences Inc. (USA)Jan J. Dubowski, Univ. de Sherbrooke (Canada)Corey M. Dunsky, Aeos Consulting, Inc. (USA)David B. Geohegan, Oak Ridge National Lab.

(USA)Alexei L. Glebov, OptiGrate Corp. (USA)Costas P. Grigoropoulos, Univ. of California,

Berkeley (USA)Bo Gu, Bos Photonics (USA)Ingmar Hartl, Deutsches Elektronen-Synchrotron

(Germany)Michael C. Heaven, Emory Univ. (USA)Stefan W. Heinemann, TRUMPF Photonics (USA)Henry Helvajian, The Aerospace Corp. (USA)Hamid Hemmati, Facebook Inc. (USA)Guido Hennig, Daetwyler Graphics AG

(Switzerland)Peter R. Herman, Univ. of Toronto (Canada)Vladimir S. Ilchenko, OEwaves, Inc. (USA)Bahram Jalali, Univ. of California, Los Angeles (USA)Andrei V. Kabashin, Aix-Marseille Univ. (France)Stefan Kaierle, Laser Zentrum Hannover e.V.

(Germany)Rainer Kling, ALPhANOV (France)

www.spie.org/proceedings

GET LASTING VISIBILITY FOR YOUR RESEARCH

Present and publish with SPIE.When you share your research at an SPIE conference and publish in the SPIE Digital Library, you are opening up opportunities for networking, collaborating, and promoting your work.

Proceedings of SPIE are covered by major scientific indexes and search services, including Web of Science, Scopus, Inspec, Ei Compendex, Astrophysical Data Service (ADS), CrossRef, and Google Scholar.

Your paper becomes globally available to the research community.

2 SPIE PHOTONICS WEST 2018 • www.spie.org/lase18call

CALL FOR PAPERS

ContentsLASER SOURCESProgram Chairs: Kunihiko Washio, Paradigm Laser Research Ltd. (Japan); John Ballato, Clemson Univ. (USA)

LA101 Solid State Lasers XXVII: Technology and Devices (Clarkson, Shori) . . . . . . . . . . . 4

LA102 Fiber Lasers XV: Technology and Systems (Hartl, Carter) . . . . . . . . . . . . . . . . 5

LA103 High Energy/Average Power Gas and Free Electron Lasers 2018 (Davis, Heaven, Schriempf) . . . . . . . . . . . . . 6

LA104 Components and Packaging for Laser Systems IV (Glebov, Leisher) . . . . . . .7

LA105 High-Power Diode Laser Technology XVI (Zediker) . . . . . . . . . . . . . . 8

LA106 Vertical External Cavity Surface Emitting Lasers (VECSELs) VIII (Chilla) . . . . . . . . . . 9

NONLINEAR OPTICS AND BEAM GUIDINGProgram Chairs: Vladimir Ilchenko, OEwaves, Inc. (USA); Paul O. Leisher, Rose-Hulman Institute of Technology (USA)

LA201 Nonlinear Frequency Generation and Conversion: Materials and Devices XVII (Vodopyanov, Schepler) . . . . . . . . . . . . . . . .10

LA202 Real-time Measurements, Rogue Phenomena, and Single-Shot Applications III (Jalali, Solli, Steinmeyer) . 11

LA203 Laser Resonators, Microresonators, and Beam Control XX (Kudryashov, Paxton, Ilchenko, Aschke) . . . . . . . . . . . . . . . . . . . . . 12

MICRO/NANO APPLICATIONSProgram Chairs: Henry Helvajian, The Aerospace Corp. (USA); Guido Hennig, Daetwyler Graphics AG (Switzerland)

LA301 Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII (Neuenschwander, Grigoropoulos, Makimura, Račiukaitis) . . . . . . . . . . . . . . . . . 13

LA302 Laser-based Micro- and Nanoprocessing XII (Klotzbach, Washio, Kling) . . . . . . . . . . . . . . . . . . . . . . . . 14

LA303 Synthesis and Photonics of Nanoscale Materials XV (Dubowski, Kabashin, Cao, Geohegan) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

LA304 Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVIII (Herman, Meunier, Osellame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

LA401 Laser 3D Manufacturing V (Gu, Helvajian, Piqué, Dunsky, Liu) . . . . . . . 17

MACRO APPLICATIONSProgram Chairs: Bo Gu, Bos Photonics (USA); Stefan Kaierle, Laser Zentrum Hannover e.V. (Germany)

LA401 Laser 3D Manufacturing V (Gu, Helvajian, Piqué, Dunsky, Liu) . . . . . . . 17

LA402 Free-Space Laser Communication and Atmospheric Propagation XXX (Hemmati, Boroson) . . . . . . . . . . . . . . . . . . . 18

LA403 High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII (Kaierle, Heinemann) . . . . . . . 19

Photonics West Applications Tracks (TRANSLATIONAL RESEARCH, BRAIN, AND 3D PRINTING) . . . . . . . . . . . . . . . . . . . 20

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Submission of Abstracts . . . . . . . . . . . . . . . . . . . . . . 22

SPIE Photonics West Exhibition . . . . . . . . . . . . . . . . 23

Submit your abstract today: www.spie.org/lase18call

Tel: +1 360 676 3290 • [email protected] • #SPIEPhotonicsWest 3


LASER SOURCE ENGINEERING

Solid State Lasers XXVII: Technology and Devices (LA101)Conference Chairs: W. Andrew Clarkson, Univ. of Southampton (United Kingdom); Ramesh K. Shori, SPAWAR Systems Ctr. (USA)

Program Committee: Patrick A. Berry, Air Force Research Lab. (USA); Marc Eichhorn, Institut Franco-Allemand de Recherches de Saint-Louis (France); Dennis G. Harris, MIT Lincoln Lab. (USA); Norman Hodgson, Coherent, Inc. (USA); Helena Jelínková, Czech Technical Univ. in Prague (Czech Republic); Christian Kränkel, Univ. Hamburg (Germany); Jacob I. Mackenzie, Univ. of Southampton (United Kingdom); Markus Pollnau, KTH Royal Institute of Technology (Sweden); Narasimha S. Prasad, NASA Langley Research Ctr. (USA); Bojan Resan, Lumentum (Switzerland), Univ. of Applied Sciences and Arts Northwestern (Switzerland); Deyuan Shen, Fudan Univ. (China)

The primary purpose of this conference is to highlight the development of new laser sources, advanced technologies, components, and laser system designs that can benefit the development, commercializa-tion, and fielding of new laser platforms based on solid state media and associated frequency conver-sion techniques. As the field matures, this conference provides a forum for the discussion of challenges and advances in materials research, applied science, and design innovations that are fundamental to the op-eration and applications of solid state lasers. Devel-opments in the IR, visible, and UV will be presented, with emphasis on new materials, components, fabri-cation techniques, and design alternatives that can enhance laser performance, reduce foot-print and/or increase device efficiency, lifetime, and reliability while reducing life-cycle costs. Descriptions of ad-vances necessary to better meet the needs of the many industrial, biomedical, life sciences, commu-nications, lidar, sensing, space and military systems, and applications in which solid state lasers play a sig-nificant role are especially solicited.

Key topics include diode-pumped lasers, novel gain materials and gain geometries, ceramic materials, alternative power scaling and resonator design ap-proaches, hybrid fiber/solid state lasers, seed lasers for solid state/fiber amplifiers, and recent develop-ments in tuning, Q-switching, ultrafast pulse genera-tion, and frequency conversion technologies. Papers describing new modeling tools, measurement tech-niques, and system miniaturization efforts are also welcome.

Several sessions in the area of lasers utilizing thin disk gain media are planned. Contributions on solid state disk lasers, disk laser gain materials including ceramics, and applications of disk lasers are especial-ly solicited.

Papers are again solicited for a series of critical tech-nologies sessions on ‘Challenges and Issues in Field, Flight and Space Qualifying Laser Components & Systems’ addressing the needs of ruggedizing air-borne and space qualifiable platforms for communi-cations, lidar, and sensing applications.

Technical areas include (but not limited to):• high-power solid state lasers and laser systems • visible and UV solid state lasers • eye-safe, mid- and far-IR solid state lasers • disk lasers • slab and rectangular waveguide lasers • single crystal (coilable & cladded) fiber lasers • seed lasers for solid state and fiber amplifiers • Q-switching and mode locking media and

techniques • new gain materials and composites • novel resonator and pumping designs • donut mode and vortex beam lasers • resonantly pumped lasers • single-frequency and narrow line lasers • lasers using ceramic gain media • laser modeling, testing, and characterization

methods • high-power beam delivery and characterization • techniques for improving laser system reliability

and efficiency • compact laser devices and miniaturization

efforts • hybrid fiber/bulk laser systems • intra-cavity and extra-cavity frequency

converted lasers • specially designed solid state lasers for specific

applications including: - photoacoustic imaging - medical, life sciences, and biophotonics - industrial, microelectronic, imaging, and

display - lidar, atmospheric, aerospace, and military

systems.



CALL FOR PAPERS

Fiber Lasers XV: Technology and Systems (LA102)Conference Chairs: Ingmar Hartl, Deutsches Elektronen-Synchrotron (Germany)

Conference Co-Chair: Adrian L. Carter, Nufern (USA)

Program Committee: Thomas Tanggaard Alkeskjold, NKT Photonics A/S (Denmark); Liang Dong, Ctr. for Optical Materials Science + Engineering Technologies (USA); Fabio Di Teodoro, Raytheon Co. (USA); Mark Dubinskii, U.S. Army Research Lab. (USA); Clifford Headley III, OFS Fitel LLC (USA); Stuart D. Jackson, Macquarie Univ. (Australia); Cesar Jauregui-Misas, Friedrich-Schiller-Univ. Jena (Germany); Peter F. Moulton, MIT Lincoln Lab. (USA); Martin H. Muendel, Lumentum (USA); Craig A. Robin, Lockheed Martin Aculight (USA); Lawrence Shah, CREOL, The College of Optics and Photonics, Univ. of Central Florida (USA); L. Brandon Shaw, U.S. Naval Research Lab. (USA); Wei Shi, Tianjin Univ. (China); Akira Shirakawa, The Univ. of Electro-Communications (Japan); Paul Steinvurzel, The Aerospace Corp. (USA); Ji Wang, Corning Incorporated (USA); Pu Wang, Beijing Univ. of Technology (China); Lihmei Yang, Laser-Femto (USA); Yoann Zaouter, Amplitude Systèmes (France); Michalis N. Zervas, Optoelectronics Research Ctr. (United Kingdom)

As research, development, and deployment of fiber lasers continues to expand, the Fiber Lasers Confer-ence at Photonics West has become the preeminent gathering in the field. Drawing leading researchers from universities, laboratories, and industry, it pro-vides a comprehensive update in all areas of fiber lasers and amplifiers. Submissions are solicited in all areas related to fibers and fiber lasers broadly cate-gorized into the following four sub-categories: • Fiber Lasers and Amplifiers • Fiber Laser Materials, Design, Fabrication, and

Characterization • Fiber Laser Devices and Sub-systems• Specially Designed Fiber Lasers for Specific

Applications.

SPECIAL ABSTRACT REQUIREMENTS: PEER REVIEW Submissions to this conference must include the fol-lowing three separate abstracts: • 100-word text abstract (for online program)

•250-word text abstract (for abstract digest) • 2-page extended abstract (for committee review

only) • The extended abstract is limited to two pages,

including tables and figures. • Include author names and affiliations; text; any

figures, tables, or images; and sufficient data to permit peer review (main body text font size at least: 11 pt. Times/Times Roman). •For US letter-size, set margins to .875 in. (2.22 cm) left and right, 1.0 in. (2.54 cm) top and 1.25 in. (3.17 cm) bottom.

• For A4 size, set margins to 1.925 cm left and right, 2.54 cm top, and 4.94 cm bottom.

• Only the extended abstract (PDF file) will be considered by the review committee when scoring submissions to determine acceptance.

• Extended abstracts will be used only for the purpose of peer review, and will not be published.

• Contributions without an extended abstract will be not considered for the conference.

Submissions must be completed by 17 July 2017.

BEST STUDENT PRESENTATION AWARDS A cash prize donated by our cosponsors will be awarded to the best and runner-up student oral presentations. To be eligible for consideration, the student must: • be a graduate or undergraduate full-time

student •have conducted the majority of the work to be presented

• submit their abstract online by the deadline •be the primary author

• select “Yes” when asked if they are a full-time student

• select themselves as the speaker• be accepted to present an oral presentation • submit their manuscript online by the

deadline • make the oral presentation.

Presentations will be judged based on scientific merit, impact, as well as clarity of the student presenter’s talk.

Cosponsors:



High Energy/Average Power Gas and Free Electron Lasers 2018 (LA103)Conference Chairs: Steven J. Davis, Physical Sciences Inc. (USA); Michael C. Heaven, Emory Univ. (USA); J. Thomas Schriempf, Naval Sea Systems Command (USA)

Program Committee: David L. Carroll, CU Aerospace LLC (USA); Jarmila Kodymová, Institute of Physics of the ASCR, v.v.i. (Czech Republic); Timothy Madden, Air Force Research Lab. (USA); Wilson T. Rawlins, Physical Sciences Inc. (USA); Greg A. Pitz, Air Force Research Lab. (USA)

Gas and chemical lasers were the first to be scaled to very high-energies and average-powers includ-ing megawatt class lasers for military applications and tens of kilowatt class lasers for industrial man-ufacturing. Prominent examples include: HF/DF, CO, CO2, and COIL and their applications. This conference solicits papers in all areas of high power lasers and applications. We especially encourage submissions that describe new hybrid systems, such as optical-ly pumped gas phase lasers, including the diode laser pumped alkali laser (DPAL) and the optically pumped rare gas laser.

This conference is envisioned to provide a good cross-section of different aspects of laser develop-ment and applications.• Papers on basic kinetics, thermodynamics,

spectroscopy, modeling, and new designs are solicited.

• Scaling of lasers for high-peak powers, high-average powers and special pulse formatting for specific applications are of interest.

• Applications including lidar, materials cutting, surface treatment and surface modifications and other intense beam applications are especially solicited.

• Papers on current progress of existing systems will be integrated into the conference to show the applications of knowledge generated by break-through technological developments.

• Applications of high-power free electron lasers (FELs).

Save the dateABSTRACTS DUE:

17 July 2017

AUTHOR NOTIFICATION:

25 September 2017The contact author will be notified of acceptance by email.

LASE MANUSCRIPT DUE DATE:

3 January 2018

PLEASE NOTE: Submissions imply the intent of at least one author to register, attend the conference, present the paper as scheduled, and submit a full-length manuscript for publication in the conference proceedings.



CALL FOR PAPERS

Components and Packaging for Laser Systems IV (LA104)Conference Chairs: Alexei L. Glebov, OptiGrate Corp. (USA); Paul O. Leisher, Lawrence Livermore National Lab. (USA)

Program Committee: Igor Anisimov, Air Force Research Lab. (USA); Jens Biesenbach, DILAS Diodenlaser GmbH (Germany); Gunnar Böttger, Fraunhofer-Institut für Zuverlässigkeit und Mikrointegration (Germany); Kristian J. Buchwald, Ibsen Photonics A/S (Denmark); Joseph L. Dallas, Avo Photonics, Inc. (USA); Allen M. Earman, SA Photonics (USA); Martin Forrer, FISBA AG (Switzerland); Manoj Kanskar, nLIGHT Corp. (USA); Alexander V. Laskin, AdlOptica Optical Systems GmbH (Germany); Xingsheng Liu, Xi’an Institute of Optics and Precision Mechanics (China); Christian V. Poulsen, NKT Photonics Inc. (USA); Mark A. Stephen, NASA Goddard Space Flight Ctr. (USA); Takunori Taira, Institute for Molecular Science (Japan); Torsten Vahrenkamp, ficonTEC Service GmbH (Germany); Alexander Yusim, IPG Photonics Corp. (USA); Chungen Zah, Focuslight Technologies, Inc. (China); Arnaud Zoubir, ALPhANOV (France)

Optical components are crucial for laser performance and form a foundation for advances in laser science and technology. All around the globe, vast and con-stantly growing research efforts are dedicated to de-veloping new and more advanced laser components and systems. Along this line, packaging solutions for optical components enable their most efficient and consistent integration in laser systems. Laser com-ponent packaging is decisive for stable and reliable laser operations while not only improving laser char-acteristics but also enabling broader laser usability and applications.

This conference is dedicated to recent achievements and progress made in the field of optical components for lasers and laser systems as well as laser packag-ing solutions. A wide range of topics covers a variety of laser components and packaging technologies for semiconductor lasers, solid state lasers, fiber lasers, gas lasers, CW and pulsed lasers, ultra-short pulsed lasers, and others.

COMPONENTS FOR LASERS• components for high-power and high-energy

laser systems • 2 micron and mid-IR optical components and

packaging • components integration for ultra-short pulsed

laser (USPL) systems • optics for ultrafast lasers • beam transforming components for laser diode

arrays • diffractive optical elements (DOE) and

holographic optical elements (HOE) • lenses and lens arrays • grating components for lasers: volume Bragg

gratings, blazed gratings, holographic phase gratings, and others

• components for laser line narrowing, mode locking, and mode selection

• components for coherent and spectral beam combining of CW and pulsed lasers

• components for laser beam engineering • high-power and high-energy beam delivery

components • frequency generation components: components

integrating nonlinear optics and novel optical designs (e.g. gas-filled fibers, resonant cavities, etc.) for SHG, THG, OPG, Raman shift, etc.

• space qualification of laser components • AR coating of components for high-power laser

applications • UV laser-induced / photochemical contamination

of laser optical components

• polarization optics for lasers • recent advances in isolators, couplers, splitters,

etc. • emerging laser components • advanced cooling components and solutions • theoretical and practical packaging solutions for

fiber coupling • novel optical component design methodologies • modeling of optical components in laser systems • advanced manufacturing techniques for laser

optical components • novel materials for optical components (high

index glasses, polymers, diamond, etc.).

LASER PACKAGING SOLUTIONS• packaging, assembly, and mounting solutions of

optical components in lasers • packaging technologies for high-power lasers • laser array packaging solutions • thermal management of high-power lasers • thermal and structural management for very

narrow linewidth frequency-locked laser systems • materials for laser packaging • materials for component attachment (epoxies,

solders, etc.) • novel active and passive alignment techniques • reliability of laser systems • modeling and design of laser packaging.



High-Power Diode Laser Technology XVI (LA105)Conference Chairs: Mark S. Zediker, Nuburu Inc. (USA)

Program Committee: Friedrich G. Bachmann, FriBa LaserNet (Germany); Stefan W. Heinemann, TRUMPF Photonics (USA); Volker Krause, Laserline GmbH (Germany); Robert Martinsen, nLIGHT Corp. (USA); Erik P. Zucker, Lumentum (USA)

The High-Power Diode Laser Technology conference provides a forum to introduce the latest advance-ments in brightness and power scaling of semicon-ductor laser devices and packages. Innovations in laser architectures based on multi-emitter bars, sin-gle emitters and multi-chip arrays are invited. Tech-nologies of special interest include developments in beam combining – coherent, spatial, spectral, and polarization – wavelength stabilization, high-bright-ness fiber coupling, device-level and package-level reliability, failure mode analysis, high-efficiency oper-ation, high-temperature operation, plus recent prog-ress in power scaling of short wavelength devices.

Papers are solicited on a wide range of topics related to high-power diode lasers, including but not limited to:• high-power diode laser systems for material

processing applications • high power diode lasers for pumping fiber laser

and other solid state laser systems • high-power visible diode lasers for display,

industrial, automotive, and medical applications • low SWaP (Size, Weight and Power

consumption) diode lasers for defense applications

• novel packaging concepts based on new material systems, gratings, coatings, and micro optics

• reliability assessment and failure analysis of high-power diode laser devices and packages

• high-brightness diode laser technology • beam shaping and homogenization optics • near- and far-field beam profile control • device modeling and multi-physics simulation • beam combining of high-power diode laser

arrays • coherent combination of lasers and laser diode

bars • wavelength stabilization with on-chip gratings or

external cavities • high-power and high-brightness fiber coupling • high-power visible diode lasers for cinema and

other projection display applications • fiber lasers pump sources • solid-state laser pump sources • large scale pump arrays for fusion energy

systems • unique high power diode laser systems and

applications • comparison of diode laser performance to other

laser technologies.

SPECIAL ABSTRACT REQUIREMENTS: PEER REVIEWContributions are accepted based on a peer review-ing process. Contributions to this conference must include the following three separate abstracts:• 100-word text abstract (for online program) • 250-word text abstract (for abstract digest) • 2-page extended abstract (for committee review

only) • The extended abstract is limited to two pages,

including tables and figures. • Include author names and affiliations; text; any

figures, tables, or images; and sufficient data to permit peer review (main body text font size at least: 11 pt. Times/Times Roman).

• For US letter-size, set margins to .875 in. (2.22 cm) left and right, 1.0 in. (2.54 cm) top and 1.25 in. (3.17 cm) bottom.

• For A4 size, set margins to 1.925 cm left and right, 2.54 cm top, and 4.94 cm bottom.

• Only the extended abstract (PDF file) will be considered by the review committee when scoring submissions to determine acceptance.

• Extended abstracts will be used only for the purpose of peer review, and will not be published.


Vertical External Cavity Surface Emitting Lasers (VECSELs) VIII (LA106)Conference Chairs: Juan L. Chilla, Coherent, Inc. (USA)

Program Committee: Arnaud Garnache, Univ. Montpellier (France); Mircea Guina, Tampere Univ. of Technology (Finland); Jennifer E. Hastie, Univ. of Strathclyde (United Kingdom); Michael Jetter, Univ. Stuttgart (Germany); Elyahou Kapon, Ecole Polytechnique Fédérale de Lausanne (Switzerland); Ursula Keller, ETH Zürich (Switzerland); Walter Lubeigt, M Squared Lasers Ltd. (United Kingdom); Jerome V. Moloney, College of Optical Sciences, The Univ. of Arizona (USA); Wolfgang Stolz, NAsP III/V GmbH (Germany); Anne C. Tropper, Univ. of Southampton (United Kingdom); Keith G. Wilcox, Univ. of Dundee (United Kingdom)

The purpose of this conference is to highlight current work in the rapidly developing field of optically- and electrically-pumped vertical external cavity surface emitting lasers (VECSELs). These lasers, which are also referred to as optically-pumped semiconductor lasers (OPSLs) or semiconductor disk lasers (SDLs), have gained a strong interest for brightness scaling over a broad range of emission wavelengths. In a VEC-SEL the light is emitted perpendicular to the epitaxial layers, unlike edge-emitting lasers where the beam propagates in the epitaxial layers. In contrast to a VC-SEL (i.e. a vertical cavity surface emitting laser) the external cavity of the VECSEL offers additional mode control for excellent transverse beam quality, even at highest power levels, and enables the integration of el-ements for nonlinear intracavity frequency conversion, wavelength tuning elements, or passive mode-locking.

Since the first demonstration in 1997, we have seen tremendous progress in VECSEL research, operating in both continuous-wave and the ultrafast regime. Optically-pumped VECSELs can convert low-cost, low-beam-quality optical pump beams provided by high-power diode laser bars into a near-diffrac-tion-limited output beam with good efficiency. This has resulted in achieving more than 20 W CW power in single frequency operation, substantially higher than from any other type of semiconductor laser. An important advantage compared to well-established diode-pumped solid-state lasers, is that VECSELs operate in spectral regions not covered by solid-state laser gain materials. To date, direct CW emission from VECSEL has been demonstrated for the entire wavelength range covered by compound semicon-ductors, extending from 640 nm to 2.9 µm, and have been extended even to 4-5 µm. Moreover they allow efficient, low-noise, intra-cavity nonlinear frequency conversion to further broaden spectral coverage, in-cluding visible, ultra-violet, and terahertz emission.

In mode-locked operation, the performance of ul-trafast VECSELs has also surpassed that of other semiconductor lasers. Ultrafast VECSELs have gen-erated average power levels of several watts in sev-eral-hundred-femtosecond pulses. Pulse durations below 100 fs have been achieved, and the repetition rate of fundamentally mode-locked VECSELs has in-creased to tens of GHz. Furthermore the SESAM and the VECSEL gain structure can be integrated into a single semiconductor structure, which is referred to as a mode-locked integrated external-cavity surface emitting laser (MIXSEL). MIXSELs can produce fun-damentally mode-locked trains of sub-picosecond pulses at repetition rates over 100 GHz. Recently, ultrafast VECSELs and MIXSELs have been used to generate gigahertz self-referenceable frequency combs and dual wavelength combs.

Such VECSEL performance should be well-suited for many applications including laser projection, optical clocking, frequency metrology, high resolution non-linear multiphoton microscopy, or laser cooling.

A selection of invited papers will provide a compre-hensive overview of the latest progress in this new field. In addition, contributed papers are solicited for this VECSEL conference with the focus on:• power scaling of VECSELs and MIXSELs • novel wavelength, heat management and optical

pumping schemes • material systems, epilayer design, and epitaxial

fabrication • intracavity nonlinear frequency conversion • numerical modeling of gain, dynamical behavior,

thermal behavior • experimental characterization of semiconductor

components, including ultrafast dynamics • electrical pumping • mode-locked operation • single frequency operation • frequency comb generation and applications • integrated extended cavities and wafer

processing • specially designed VECSELs and MIXELS for

specific applications.

BEST STUDENT PRESENTATION AWARDThe committee is pleased to announce that this year a cash prize of $500, donated by Coherent Inc., will be awarded for the best student presen-tation; judged, by the committee, on the basis of scientific content, impact, and clarity. To be eligible for consideration, the student must:• submit their abstract online by the deadline • be the primary author • select “Yes” when asked if they are a full-time

student • select themselves as the speaker • be accepted to present an oral presentation • make the oral presentation.

CALL FOR PAPERS

Cosponsor:


NONLINEAR OPTICS AND BEAM GUIDING

Nonlinear Frequency Generation and Conversion: Materials and Devices XVII (LA201)Conference Chairs: Konstantin L. Vodopyanov, CREOL, The College of Optics and Photonics, Univ. of Central Florida (USA); Kenneth L. Schepler, CREOL, The College of Optics and Photonics, Univ. of Central Florida (USA)

Program Committee: Darrell J. Armstrong, Sandia National Labs. (USA); Majid Ebrahim-Zadeh, ICFO - Institut de Ciències Fotòniques (Spain); Baldemar Ibarra-Escamilla, Instituto Nacional de Astrofísica, Óptica y Electrónica (Mexico); Rita D. Peterson, Air Force Research Lab. (USA); Peter G. Schunemann, BAE Systems (USA); Wei Shi, Tianjin Univ. (China); Michael Vasilyev, The Univ. of Texas at Arlington (USA)

The purpose of this conference is to provide a forum for discussing advances in nonlinear optics. Areas of emphasis include new devices and techniques for im-proved nonlinear frequency conversion, new effects and demonstrations based on nonlinear optics, as well as novel nonlinear optical materials.

Topics include:

DEVICES AND TECHNIQUES• nonlinear processes in bulk crystals, fibers,

waveguides and thin films • parametric frequency up and down conversion • stimulated Raman and Brillouin scattering • four-wave mixing and other 3rd and higher-

order nonlinear processes • frequency combs and supercontinuum

generation • THz generation based on nonlinear conversion,

THz spectroscopy and imaging.

NONLINEAR MATERIALS• bulk inorganic and organic nonlinear materials • engineered nonlinear materials including

semiconductors • nanostructures, photonic bandgap structures • nonlinear fibers, waveguides and thin films • new measurement techniques of nonlinear

optical properties.

SPIE journals are part of the SPIE Digital Library, the world’s largest collection of

optics and photonics research.

Choose Open Access for your paper and increase its visibility:

www.spie.org/JournalsOA

Join SPIE and get a subscription to one online journal with your membership, or request

access from your librarian.

www.spie.org/journals

SUBMIT YOUR NEXT PAPER TO AN

SPIE JOURNAL


CALL FOR PAPERS

Real-time Measurements, Rogue Phenomena, and Single-Shot Applications III (LA202)Conference Chairs: Bahram Jalali, Univ. of California, Los Angeles (USA); Daniel R. Solli, Univ. of California, Los Angeles (USA), Georg-August-Univ. Göttingen (Germany); Günter Steinmeyer, Max Born Institute for Nonlinear Optics and Short Pulse Spectroscopy (Germany)

Program Committee: Nail Akhmediev, The Australian National Univ. (Australia); Mohammad H. Asghari, Univ. of California, Los Angeles (USA); Serge Bielawski, Univ. des Sciences et Technologies de Lille (France); John M. Dudley, FEMTO-ST, Univ. de Franche - Comté, CNRS (France); Moti Fridman, Bar-Ilan Univ. (Israel); Hideaki Furukawa, National Institute of Information and Communications Technology (Japan); Goëry Genty, Tampere Univ. of Technology (Finland); Georg Herink, Georg-August-Univ. Göttingen (Germany); Takuro Ideguchi, The Univ. of Tokyo (Japan); Dario Polli, Politecnico di Milano (Italy); Claus Ropers, Georg-August-Univ. Göttingen (Germany); Pierre Suret, Lab. de Physique des Lasers, Atomes et Molécules (France); Masayuki Suzuki, Aichi Medical Univ. (Japan); Majid Taki, Univ. des Sciences et Technologies de Lille (France); Paul D. Trinh, Time Photonics, Inc. (USA)

Rogue events, otherwise known as outliers and black swans, are singular, rare events that carry import-ant information about the system from which they emerge. They appear in seemingly unconnected contexts such as ocean waves, finance, evolution, mechanical failures, nonlinear optics, and communi-cation systems. Attempts to understand the under-lying dynamics of complex systems exhibiting dra-matic outcomes are often frustrated by the scarcity of events and by the inability to perform experiments under controlled conditions. In many cases, very large data volumes may be required to encompass the dynamics. Moreover, it may be extremely time consuming to model such dynamics with digital sim-ulations, and accuracies are limited by knowledge of the initial conditions. Ultrafast systems make it possi-ble to collect large data sets, even for rare events, in a relatively short time period. The knowledge gained from observing rare events in ultrafast systems pro-vides valuable insight into extreme value phenomena that occur over much slower timescales, including those that have a closer connection with human experience. However, the real-time measurement of fast single shot events with large record lengths is one of the most challenging problems in the fields of instrumentation and measurement. Notwithstand-ing the sensitivity and speed requirements needed for single-shot real-time measurements, such in-struments also create a big data problem associated with continuous-recording at high data rates. Appli-cations include the study of optical rogue waves, the investigation of nonlinear dynamics and laser tran-sients, photon Doppler velocimetry (PDV) for single shot optical ranging, the detection of rare cancer cells in blood, high-throughput spectroscopy, indus-trial inspection and machine vision.

The aim of this conference is to create a forum for presentation of the latest developments in rogue waves, nonlinear dynamics and real-time instruments and to facilitate the exchange of ideas in this new and promising field of science and technology.

Topics of interest include but are not limited to:• real-time spectroscopy and imaging • time-stretch systems • optical rogue waves • laser transients • nonlinear dynamics • dissipative solitons • soliton molecules • dual comb spectroscopy • instabilities in linear and nonlinear systems • lidar • photon Doppler velocimetry and optical ranging • ultrafast optical signal characterization • high-speed Raman spectroscopy • time-bandwidth engineering • single-shot pulse characterization • real-time optical data analytics • real-time data compression • mathematical and analytical techniques.



NONLINEAR OPTICS AND BEAM GUIDING

Laser Resonators, Microresonators, and Beam Control XX (LA203)Conference Chairs: Alexis V. Kudryashov, Institute of Atmospheric Optics (Russian Federation); Alan H. Paxton, Air Force Research Lab. (USA); Vladimir S. Ilchenko, OEwaves, Inc. (USA)

Conference Co-Chairs: Lutz Aschke, TRUMPF Lasertechnik GmbH (Germany)

Program Committee: Andrea M. Armani, The Univ. of Southern California (USA); Gaurav Bahl, Univ. of Illinois at Urbana-Champaign (USA); Yanne K. Chembo, FEMTO-ST (France); Jean-Claude M. Diels, The Univ. of New Mexico (USA); Hans Joachim Eichler, Technische Univ. Berlin (Germany); Andrew Forbes, Univ. of the Witwatersrand (South Africa); Pierre Galarneau, INO (Canada); Michael L. Gorodetsky, Russian Quantum Ctr. (Russian Federation); Thomas Graf, Univ. Stuttgart (Germany); Tobias J. Kippenberg, Ecole Polytechnique Fédérale de Lausanne (Switzerland); James R. Leger, Univ. of Minnesota, Twin Cities (USA); Andrey B. Matsko, OEwaves, Inc. (USA); Gualtiero Nunzi Conti, Istituto di Fisica Applicata “Nello Carrara” (Italy); Andrew W. Poon, Hong Kong Univ. of Science and Technology (Hong Kong, China); Michael J. Scaggs, Haas Laser Technologies, Inc. (USA); Haiyin Sun, ChemImage Corp. (USA); Yun-Feng Xiao, Peking Univ. (China); Lei Xu, Fudan Univ. (China); Lan Yang, Washington Univ. in St. Louis (USA)

Laser resonators may be considered to be the heart of any laser system and mainly determine the output beam quality of any type of laser. Therefore resona-tor design may be the solution of various scientific and technological problems. Controlling the shape of laser beams is central to all laser applications and is an enabling factor for the application of lasers in new technologies. This conference will explore new and novel approaches to the beam shaping of laser radi-ation with low- and high-power levels and the design of laser resonators with various nonstandard optical elements and systems. Also new criteria for laser beam characterization of lasers and amplifiers, and beam and pulse formation in lasers will be discussed.

Optical microresonators have grown into an expand-ing field of optical science and engineering that has produced a toolkit for a growing number of photon-ics applications including: narrow-linewidth lasers; optical frequency combs; radio-frequency, terahertz oscillators; circuits and signal processors; frequency metrology; high-rate data communication; biochem-ical, inertial and other optical sensors. In this confer-ence we explore the progress in existing microcavity technologies as well as the latest developments in-cluding quantum optics applications in single pho-ton and correlated photon pair sources, microcavity QED, qubits, quantum gates, correlated frequency combs and beyond.

Conference papers are solicited on a wide range of topics related to the conference title, including but not limited to the following:

LASER RESONATORS:• active and adaptive laser resonators • stable and unstable laser resonators for high-

quality laser beams • resonators for gas, solid state, and fiber lasers • high-stability laser resonators.

BEAM SHAPING AND BEAM CONTROL OF SPECIFIC LASERS:• mode shaping and control of diode laser beams • fiber coupling of diode lasers • lasers with phase conjugation • femtosecond lasers: beam and pulse control and

formation • laser beam homogenization • Gauss to top hat conversion • line focus generation • generation of application specific intensity

distributions

• beam shaping of multi KW lasers • new optical elements and systems for lasers • laser-beam characterization and measurement

of laser-beam parameters • spatial stabilization of laser beam shapes • beam delivery systems • feedback and control systems for aiming,

frequency stabilization, or energy absorption • high-power and high-brightness beam delivery

optics, including advanced isolators, connectors, beam switches, etc.

• high-speed beam steering devices, including KTN scanners, etc.

• advanced beam shapers and spatial light modulators for smart laser processing, etc.

• novel polarization and angular momentum state conversion devices and technologies.

OPTICAL MICRORESONATORS: FUNDAMENTAL STUDIES AND PHOTONICS APPLICATIONS• microresonator fundamentals: novel resonator

topologies, coupling methods, materials, dispersion management, and quality-factor limits

• nonlinear optics with microresonators. • microresonators for optical frequency combs,

parametric oscillators and frequency conversion • quantum optics with microresonators.

Microcavities in single-photon and correlated sources, quantum gates and qubits, quantum nondemolition measurements, and cavity QED

• microcavities for lasers: frequency stabilization, gain functionalization, stimulated Raman scattering

• microcavities in microwave and terahertz photonic oscillators, receivers, filters

• microcavity optomechanics: stimulated Brillouin scattering, cooling, phonon lasers, and particle manipulation

• microresonators in biochemical, inertial and other optical sensors

• microcavity fabrication technologies, device integration, packaging and stability factors.


MICRO/NANO APPLICATIONS

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII (LA301)Conference Chairs: Beat Neuenschwander, Berner Fachhochschule Technik und Informatik (Switzerland); Costas P. Grigoropoulos, Univ. of California, Berkeley (USA); Tetsuya Makimura, Univ. of Tsukuba (Japan); Gediminas Račiukaitis, Ctr. for Physical Sciences and Technology (Lithuania)

Program Committee: Craig B. Arnold, Princeton Univ. (USA); J. Thomas Dickinson, Washington State Univ. (USA); Jan J. Dubowski, Univ. de Sherbrooke (Canada); Bo Gu, Bos Photonics (USA); Henry Helvajian, The Aerospace Corp. (USA); Sami T. Hendow, Adaptive Laser Processing (USA); Guido Hennig, Daetwyler Graphics AG (Switzerland); Heinz P. Huber, Hochschule für Angewandte Wissenschaften München (Germany); Michel Meunier, Ecole Polytechnique de Montréal (Canada); Yoshiki Nakata, Osaka Univ. (Japan); Hiroyuki Niino, National Institute of Advanced Industrial Science and Technology (Japan); Alberto Piqué, U.S. Naval Research Lab. (USA); Andrei V. Rode, The Australian National Univ. (Australia); Stephan Roth, BLZ Bayerisches Laserzentrum GmbH (Germany); Klaus Sokolowski-Tinten, Univ. Duisburg-Essen (Germany); Razvan Stoian, Lab. Hubert Curien (France); Koji Sugioka, RIKEN (Japan); Xianfan Xu, Purdue Univ. (USA); Steven M. Yalisove, Univ. of Michigan (USA)

The aim of this conference is to provide a forum for discussion of fundamentals, methods, and tech-niques in laser materials processing and their relation to the applications and manufacturing of micro- and nanoscale electronic, photonic, optical, mechanical, fluidic, energy, and hybrid devices. Topics cover pro-cess development and applications for technical and consumer electronics as well for medical devices.

Papers are solicited on, but not limited to, the follow-ing topics within the broad area of microelectronics and optoelectronics manufacturing:

DYNAMICS OF LASER-MATTER INTERACTION• fundamental aspects of laser-materials

interaction • generation and dynamics of laser ablation

plumes, including gas-dynamic effects, charge generation, and charge transfer

• modeling of laser-materials and laser-plume interactions for quantitative prediction of process parameters

• novel approaches for laser micro-processing including temporal and spatial beam shaping, pulse bursts etc.

• novel analytical methods.

LASER PROCESSES• laser modification of materials (annealing,

doping, intermixing, photosensitivity) • laser cleaning, texturing, bending, and repair • laser nanoscale materials processing and

manufacturing, including near-field nano-optical lithography

• pulsed-laser deposition, laser-assisted thin-film epitaxy, atomic-layer epitaxy, resonant infrared pulsed-laser deposition, thin film and wafer processing

• laser additive manufacturing and rapid prototyping on micro- and nanoscale

• laser-induced modification of glasses or transparent materials for applications in optoelectronic and photonics.

PRODUCTION TECHNOLOGIES• laser processing in microelectronic and

optoelectronic manufacturing • parallel laser manufacturing

• direct write technologies for microelectronic and optoelectronic applications

• digital photonic production • laser manufacture of microsystems (including

microfluidic chips) and photonic and optoelectronic devices (LED, OLED)

• novel systems and sub-systems for microelectronic and optoelectronic materials processing and device fabrication.

JOINT SESSIONS ARE PLANNED WITH: • Laser-based Micro- and Nanoprocessing

(LA302) • Synthesis and Photonics of Nanoscale Materials

(LA303) • Frontiers in ultrafast Optics (LA304) • Laser 3D Manufacturing (LA401)

BEST STUDENT PRESENTATION AWARDSupported by the conference cosponsors, we will offer awards for the best oral and poster presen-tations given by students. Student contributions will be judged based on scientific content and quality of presentation, and the winners will be honored with a cash prize. To be eligible for the awards, you must:• be a graduate or undergraduate full-time

student • have conducted the majority of the work to

be presented • submit your abstract online by the deadline • be the primary author • select “Yes” when asked if you are a full-time

student • select yourself as the speaker • be accepted to present in conference LA301 • submit your manuscript online by the deadline • make the oral/poster presentation.

Note that prior prize holders will not be eligible.

Cosponsors:


Laser-based Micro- and Nanoprocessing XII (LA302)Conference Chairs: Udo Klotzbach, Fraunhofer IWS Dresden (Germany)

Conference Co-Chairs: Kunihiko Washio, Paradigm Laser Research Ltd. (Japan); Rainer Kling, ALPhANOV (France)

Program Committee: Antonio Ancona, CNR-Istituto di Fotonica e Nanotecnologie (Italy); Arkadiusz J. Antonczak, Wroclaw Univ. of Technology (Poland); Craig B. Arnold, Princeton Univ. (USA); Jiyeon Choi, Korea Institute of Machinery & Materials (Korea, Republic of); Francois Courvoisier, Univ. de Franche-Comté (France); Chunlei Guo, Univ. of Rochester (USA); Miguel Holgado Bolaños, Univ. Politécnica de Madrid (Spain); Minghui Hong, National Univ. of Singapore (Singapore); Andrés-Fabián Lasagni, TU Dresden (Germany); Yongfeng Lu, Univ. of Nebraska-Lincoln (USA); Yoshiki Nakata, Osaka Univ. (Japan); Andreas E. H. Oehler, Lumentum (Switzerland); Wilhelm Pfleging, Karlsruhe Institute of Technology (Germany); Martin Sharp, Liverpool John Moores Univ. (United Kingdom); Barbara Stadlober, JOANNEUM RESEARCH Forschungsgesellschaft mbH (Austria); Razvan Stoian, Lab. Hubert Curien (France); Koji Sugioka, RIKEN (Japan); Hong-Bo Sun, Jilin Univ. (China); Jorma Vihinen, Tampere Univ. of Technology (Finland); Akira Watanabe, Tohoku Univ. (Japan); Michael J. Withford, Macquarie Univ. (Australia); Xianfan Xu, Purdue Univ. (USA); Haibin Zhang, Electro Scientific Industries, Inc. (USA); Haiyan Zhao, Tsinghua Univ. (China)

The aim of this conference is to bring together scien-tists and engineers working on laser-based processes on micro- and nano-meter scales for advanced ap-plications. Cutting-edge technological visions and applications are increasingly based on micro- and nano-system technologies. The realization of such devices or functional prototypes is often a new chal-lenge for patterning, structuring, and processing. Scientists and engineers are increasingly confronted with tasks that cannot be accomplished with conven-tional tools.

Demands in high-tech industries are growing for specialized prototypes and high-throughput devic-es with micro- and nano-scaled structures, including fluidic, biologic, chemical, electronic, mechanical, or photonic features. Nano-materials and nano-pattern-ing technologies increasingly coexist with micro-ma-terials and micro-structuring technologies, leading not only to new applications and research fields but also to new challenges for appropriate assembly and processing technologies.

Laser-assisted applications emerge as an increasing-ly important technology which can be established in new technical approaches, in order to overcome apparent process limitations on nearly each material and for different scaling lengths. The conference is an ideal platform for scientists and engineers working on laser-based processes on micro- and nano-meter scales for advanced applications. These include pho-tovoltaics, energy storage systems, MOEMS, MEMS/bio-MEMS, NEMS, micro- and nano-fluidic devices, which, e.g. apply advanced beam source and beam delivery technologies, including high throughput laser processing with high-speed scanners and ad-vanced parallel processing techniques for improving the yield in the laser processes.

Papers are solicited on the following application-ori-ented topics and other laser processing related is-sues:• Fundamental physical and chemical issues

in laser-based micro- and nano-fabrication, processing, 3D laser processing and assembly.

• Laser material processing for metals, polymers, ceramics, semiconductors, or dissimilar materials- laser ablation (cutting, scribing, dicing, drilling,

and cleaving). - laser joining (welding, soldering, bonding,

splicing, and sealing). - laser transformations and modification for

integrated device functionalities (annealing, curing, alloying, doping, metallization, cleaning, polymerization, sintering, cladding, bending, forming change of chemical/physical properties and transferring).

- laser ablation and micro- and nano-machining relevant for device fabrication and processing (drilling, marking, engraving, milling, caving, texturing, trimming, deflashing).

- laser surface structuring in the micro- and nano-meter scales (texturing, interference patterning, laser induced periodic surface patterns).

• Laser processes for alternative energy sources and advanced energy storage systems (e.g. lithium-ion batteries), power-electronics devices, photovoltaics processing, including contact formation, laser-assisted selective metallization, edge isolation, thin film processing, and soldering etc.

• Laser processing and packaging of thin and flexible advanced electronic and photonic components.

• Structuring, packaging, and assembling of components in micro-reaction technology, micro-electronic and photonic devices, MOEMS, MEMS/bio-MEMS, NEMS , micro- and nano-fluidic devices and analytical systems (e.g. lab-on-chip).

• High-speed large area laser processing and High speed laser beam engineering systems, advanced adaptive optics and beam engineering methods for improving laser processes, yields, and throughput.

• Innovative “green photonics” for micro- and nano-processing and assembly.



CALL FOR PAPERS

Synthesis and Photonics of Nanoscale Materials XV (LA303)Conference Chairs: Jan J. Dubowski, Univ. de Sherbrooke (Canada); Andrei V. Kabashin, Aix-Marseille Univ. (France); Linyou Cao, North Carolina State Univ. (USA); David B. Geohegan, Oak Ridge National Lab. (USA)

This conference is dedicated to the use of lasers in nanoscience, and the exploration of their unique capabilities to synthesize, characterize, modify, and manipulate nanostructures and their interaction with their local environment. Lasers are not only power-ful tools for the nonequilibrium synthesis of unique nanostructures by pulsed laser vaporization, depo-sition, and surface processing but they also provide sensitive spectroscopic probes of the novel electronic and vibrational properties of nanoscale materials and energy transfer within their architectures. Coupled with atomistic modeling and atomic-resolution char-acterization available today, the discrete excitation of quantum dots and 2D materials provided by lasers provides a unique testbed to understand optoelec-tronic and thermal phenomena. This fundamental understanding of nanostructure synthesis and prop-erties provides the means to remotely characterize nanomaterials using optical spectroscopy, including in situ remote manipulation and control over their size, shape, orientation, and alignment. Understand-ing the dynamics of laser processing at nanoscale dimensions is essential to explore new laser welding, cutting, doping, alloying, patterning and intermixing methods for nanomaterials to form novel new archi-tectures to enable applications ranging from biode-tectors to photovoltaics and other energy materials. This symposium crosscuts nanoscience research in materials science, chemistry, biology, physics, and engineering to explore new laser-based techniques for synthesis, characterization, manipulation, and control of nanostructures.

Papers are solicited on the following topics:• laser-based synthesis/diagnostics of

nanostructure growth: from 0D and 1D nanomaterials such as nanocrystals, nanoparticles, quantum dots, nanohorns, nanowires, nanotubes, to 2D nanosheets such as graphene, metal chalcogenides, to heterostructures of nanomaterials, including multi-element (semiconductor) materials, polymers and composites

• laser characterization of nanostructures and atomically-thin 2D materials, including electronic excitations and vibrational dynamics by photoluminescence, Raman scattering, transient ultrafast absorption, and nonlinear spectroscopic techniques

• theory and modeling of laser-nanomaterial interactions: optoelectronic and thermal phenomena

• laser photo-control of physical and chemical properties of nanostructures for catalysis, photovoltaics, photonics, plasmonics, biomolecule detection

• laser-control of optical, electrical and magnetic properties of nanostructures and their devices by impurity doping, impurity-free processing and bandgap engineering

• laser-based surface modification and size manipulation of individual nanostructures (i.e. shaping, cutting, melting/recrystallization, doping, welding)

• multiphoton / femtosecond laser energy localization for nanoscale laser processing

• laser-synthesis of nanostructured surfaces, including sub-λ ablation, machining, LIPSS.

JOINT SESSION WITH LA301 AND LA303: LASER MODIFICATION OF NANOMATERIALSThe intent of this session is to present recent research in laser interactions with nanomaterials for the development of new laser-based processing techniques. This includes laser interactions with nanomaterials resulting in physical transformations such as melting, alloying, shaping, welding, sintering, and solidification, laser-induced chemical modifications to nanomaterials, mechanisms of laser-induced defect generation or healing, laser processing techniques to move, self-assemble, or separate nanomaterials, as well as laser-based processing techniques for producing plasmonic nanostructures.



Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVIII (LA304)Conference Chairs: Peter R. Herman, Univ. of Toronto (Canada); Michel Meunier, Ecole Polytechnique de Montréal (Canada); Roberto Osellame, CNR-Istituto di Fotonica e Nanotecnologie (Italy)

Program Committee: Craig B. Arnold, Princeton Univ. (USA); Yves Bellouard, Ecole Polytechnique Fédérale de Lausanne (Switzerland); Adela Ben-Yakar, The Univ. of Texas at Austin (USA); Alexander Heisterkamp, Leibniz Univ. Hannover (Germany); Denise M. Krol, Univ. of California, Davis (USA); Eric Mazur, Harvard Univ. (USA); Eric P. Mottay, Amplitude Systèmes (France); Beat Neuenschwander, Berner Fachhochschule Technik und Informatik (Switzerland); Stefan Nolte, Friedrich-Schiller-Univ. Jena (Germany); Christopher B. Schaffer, Cornell Univ. (USA); Koji Sugioka, RIKEN (Japan); Mitsuhiro Terakawa, Keio Univ. (Japan); Alfred Vogel, Univ. zu Lübeck (Germany); Sascha Weiler, TRUMPF Inc. (USA); Dvir Yelin, Technion-Israel Institute of Technology (Israel)

Recent advances in ultrafast laser technology have resulted in widespread availability of robust, prac-tical laser sources. As a result, useful applications for these sources have emerged in many different fields, from micromachining and THz-imaging to nonlinear microscopy and semiconductor testing to laser surgery and communications. Now in its eigh-teenth year, this conference is the premier venue for discussing the development of new ultrafast laser sources, the manipulation and characterization of ultrashort pulses as well as their use in biomedical, scientific and industrial applications. We anticipate a larger conference than ever that will bring together a multi-disciplinary group consisting of university researchers from diverse fields, as well as scientists and engineers from industry. A program that in-cludes invited and tutorial presentations will provide the context for contributed talks and posters, and for stimulating discussions.

We encourage submission of papers on all aspects of applications of ultrafast lasers and on ultrafast laser technology development. In addition, all graduate and undergraduate students are encouraged to enter their submissions in the Student Competition for best presentation (see below).

General topics include, but are not limited to, the fol-lowing areas:• emerging ultrafast laser technologies and novel

systems • ultrafast laser source engineering for industrial

and biomedical use • characterization and measurement of ultrashort

pulses • ultrashort pulse delivery and beam manipulation • ultrashort pulse propagation and nonlinear

effects in materials • interaction of ultrashort pulses with materials • surface micromachining using ultrafast lasers • ultrafast laser micromachining of transparent

materials • interactions and modification of biological

tissues • tissue and surgical applications of ultrashort

pulse lasers • optical manipulation of biological systems with

ultrashort pulses • micro and nano manipulation of cells and

organelles, optical transfection

• ultrafast lasers in plasmonics, interaction with nanoparticles

• novel medical applications of ultrafast lasers • generation and applications of x-ray ultrashort

pulses.

CONFERENCE HIGHLIGHTSIn addition to the exciting technical program that has been the hallmark of previous years, we plan several highlights this year:• Joint sessions with LA301, addressing the field

of laser processing by ultrashort lasers • Session hosting the best student competition,

awarding the best student paper.

STUDENT COMPETITIONThanks to generous corporate sponsorship, we are happy to announce that a student competition will be held again this year. Due to the great success in previous years, the competition will be a general best student award, taking posters and talks into account. The winner will be announced and awarded a $1000 cash prize to the best student paper with the run-ner-up students receiving a cash prize as well.

Judging and RequirementsContributions submitted by graduate and undergrad-uate students are eligible, both poster or talk. In or-der to ensure a fair evaluation the conference chairs and the program committee will judge the students within a special session held during the conference. Here, the students have to present a brief summary of their original talk or poster presented at our con-ference with a time limit of 5 minutes. Presentations will be judged based on content, scientific impact, organization, quality of presentation, and present-er’s mastery of the subject. Candidates for the award need to be the presenting author, a full-time student, must have conducted the majority of the research presented in the paper.

NominationsTo be considered, submit your abstract online, select “Yes” when asked if you are a full-time student, and select yourself as the speaker. Note that prior first prize holders may participate, but will not be eligible for a cash prize.


Cosponsors:


Laser 3D Manufacturing V (LA401)Conference Chairs:Bo Gu, Bos Photonics (USA); Henry Helvajian, The Aerospace Corp. (USA); Alberto Piqué, U.S. Naval Research Lab. (USA); Corey M. Dunsky, Aeos Consulting, Inc. (USA); Jian Liu, PolarOnyx, Inc. (USA)

Program Committee:John T. Fourkas, Univ. of Maryland, College Park (USA); Youping Gao, Aerojet Rocketdyne (USA); Craig Goldberg, Newport Corp. (USA); Weidong Huang, Northwestern Polytechnical Univ. (China); Yuji Sano, ImPACT (Japan); Michael Thiel, Nanoscribe GmbH (Germany); Paul S. Unwin, Stanmore Implants (United Kingdom); Augustine M. Urbas, Air Force Research Lab. (USA); Martin Wegener, Karlsruher Institut für Technologie (Germany)

Additive manufacturing and 3D printing are revolu-tionizing the way objects can be fabricated. Leading this revolution are laser-based digital fabrication techniques and processes, which offer the greatest versatility and range in terms of feature size (nano to macro), material type (from metals and ceramics to organics), phase (bulk to porous, homogenous to graded compositions), and processing options (from ablative to sintering and physical to chemical modi-fication).

This conference will provide a common forum for various laser-based disciplines that promise to yield advances in manufacturing that will accelerate the mass-customization of products. Examples of these disciplines include laser free-form fabrication which involve additive and subtractive techniques to per-mit the development of solid objects that cannot be manufactured using traditional approaches. Also considered are laser-based materials processing techniques that rely on light-matter interaction phe-nomena to achieve transformative effects. Another example includes the interaction of lasers with func-tional or advanced materials to yield structures with a desired functional property and very high specificity. Many of these materials also have protean (mutable, changeable) properties that could be induced via light-matter interaction “upon command.” Common to all these processes is their operation under com-puter control without requiring part specific tooling or special fixturing. All these and other laser-based processing disciplines are enablers for the revolution in manufacturing offered by direct 3D fabrication.

The primary goal of this conference is to provide a forum for professionals in materials science, laser processing physics/chemistry, mechanical engineer-ing, design tools, software modeling, characteriza-tion and metrology to share and discuss the latest advances in the field of laser-based manufacturing. This gathering will offer a unique opportunity to join the discussion for the development and implementa-tion of next generation laser-based 3D manufactur-ing processes.

JOINT SESSIONSJoint sessions with LAMOM (LA301), Synthesis and Photonics of Nanoscale Materials (LA303) and Ad-vanced Fabrication Technologies for Micro/Nano Optics and Photonics (OE201) are being considered to bridge with other technologies relevant to laser 3D manufacturing such as fundamentals of laser processing, nanoscale processing and fabrication of micro/nano optics. Future joint sessions with material developers will also be planned.

Papers are solicited on the following topics:• applications of laser-based 3D manufacturing • laser-based solid freeform fabrication • selective laser sintering (SLS) • direct metal laser sintering (DMLS) • selective laser melting (SLM) • laser cladding • stereolithography (SLA) • multi-photon polymerization • laser direct-write and laser induced forward

transfer (LIFT) • laser-based bioprinting • bio-inspired processing techniques • biomedical structures and devices generated by

laser digital fabrication • laser manufacturing of materials with graded or

heterogeneous composition • laser induced phase transformations to realize

specific material properties • lasers, materials and process controls for

additive manufacturing • effects of laser processing conditions on

mechanical behavior • scale-up and overcoming product throughput

barriers • development of standards and structure

validation • laser-materials processing interactions,

modeling, and simulation • process-structure-property relationships • development of in situ sensors for all 3D

manufacturing technologies (e.g. SLS, DMLS, SLM and SLA)

• sensors for 3D manufacturing validation • sensors for 3D manufacturing verification.

CALL FOR PAPERS


Cosponsor:


MACRO APPLICATIONS

Free-Space Laser Communication and Atmospheric Propagation XXX (LA402)Conference Chairs: Hamid Hemmati, Facebook Inc. (USA); Don M. Boroson, MIT Lincoln Lab. (USA)

Program Committee: Abhijit Biswas, Jet Propulsion Lab. (USA); Donald M. Cornwell Jr., NASA Goddard Space Flight Ctr. (USA); Olga Korotkova, Univ. of Miami (USA); William S. Rabinovich, U.S. Naval Research Lab. (USA); Zoran Sodnik, European Space Research and Technology Ctr. (Netherlands); Morio Toyoshima, National Institute of Information and Communications Technology (Japan)

This conference will provide a forum for all profes-sionals involved in technologies related to free-space laser communications, and broadband optical com-munications. The conference will cover subjects re-lated to the latest research and technology advances, and provide an overview useful to lasercom special-ists, technology managers, and THz/mm-wave com-munication engineers. Papers are encouraged on ongoing laser communication programs, free-space laser communication system requirements, technol-ogy and subsystem advancements, and in-depth analysis of present status and future trends. Original papers are solicited on, but are not limited to, the fol-lowing topics:

FREE-SPACE LASER COMMUNICATION TECHNOLOGIES AND ATMOSPHERIC PROPAGATION• present and future laser communication

systems; space-based systems, airborne links terrestrial/indoor/commercial links

• next generation lasercom technologies • modulation and error correction encoding • pointing, acquisition, and tracking • atmospheric propagation, transmission effects,

and compensation techniques • transmitters for space, receivers, subsystems,

optical and optoelectronic components • flight qualification, lifetime and reliability • ground receivers, particularly low-cost large

apertures (telescope, dome, gimbal) • optics for electronic module interconnects • quantum communication and cryptography • global communications systems that make use

of wireless-terrestrial, air, and space optical connections

• free-space-laser-based gravitational wave sensing systems.


High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII (LA403)Conference Chairs: Stefan Kaierle, Laser Zentrum Hannover e.V. (Germany); Stefan W. Heinemann, TRUMPF Photonics (USA)

Program Committee: Bo Gu, Bos Photonics (USA); Klaus R. Kleine, Coherent, Inc. (USA); Annett Klotzbach, Fraunhofer IWS Dresden (Germany); Wolfgang Knapp, Cooperation Laser Franco-Allemande (France); Lin Li, The Univ. of Manchester (United Kingdom); Silke Pflueger, Consultant (USA); Stephan Roth, BLZ Bayerisches Laserzentrum GmbH (Germany); Leonardo D. Scintilla, Politecnico di Bari (Italy); Stefaan Vandendriessche, Edmund Optics Inc. (USA); Kunihiko Washio, Paradigm Laser Research Ltd. (Japan)

High-power lasers are used in a multitude of indus-trial settings. There are several key laser technologies employed for materials processing and each laser type, wavelength and architecture has its advantages and key applications where it excels. The laser, how-ever, is only part of the story. Delivering the beam to the work piece, and monitoring both the beam characteristics, as well as the process, are important enablers for any given application.

This conference will explore high-power lasers, how their radiation is shaped and delivered to the work piece, how the process is monitored, and, in general, their use in the world of industrial materials process-ing. Preference will be given to “real world” indus-try-related submissions. Papers are solicited on a wide range of topics related to the conference title, including but not limited to the following:

APPLICATIONS:• all types of laser welding, including remote

welding and hybrid welding • brazing / soldering • joining of non-ferrous and dissimilar materials • laser applications for light-weight materials (e.g.

cutting, structuring, joining) • laser processes for battery manufacturing • laser metal deposition • hardening • cladding • cleaning and structuring • surface treatment • cutting, including remote cutting • drilling • rapid prototyping and manufacturing.

DIAGNOSTICS:• laser-beam characterization and measurement

of laser-beam parameters • laser material interaction • process monitoring • vision systems and tracking • destructive and non-destructive quality testing

methods • surface diagnostics • coupling experiments and simulations • high-speed imaging • particulate diagnostics • systems considerations.

SYSTEMS:• processing heads and accessories for cutting,

welding, material deposition (LMD) and surface treatment

• scanning heads • beam shaping and guiding devices, including

fibers, connectors, and accessories • fibers and components for high peak power

usage • thermal lensing and optics design approaches.

JOINT SESSIONS WITH LA203 LASER RESONATORS, MICRORESONATORS, AND BEAM CONTROL (BEAM SHAPING COMPONENTS) AND LA401 (LASER 3D-MANUFACTURING) Joint sessions may be held to accommodate pre-sentations that cover the aspects of the respective conferences.


17 July 2017




3 January 2018


CALL FOR PAPERS



Get more exposure from your work—include your abstract in a Photonics West Applications TrackIf your BiOS, LASE, or OPTO paper has applications for translational research, 3D printing, environmental or energy solutions, then you are eligible to include your abstract in one of the Photonic West Applications Tracks. See details below on how to submit your abstract.

Translational Research

SPIE Translational Research 2018 will highlight pa-pers that showcase the latest photonics technolo-gies, tools, and techniques with high potential to impact healthcare.• Photonic Therapeutics and Diagnostics• Neurophotonics, Neurosurgery, and

Optogenetics• Tissue Optics, Laser-Tissue Interaction, and

Tissue Engineering• Clinical Technologies and Systems• Biomedical Spectroscopy, Microscopy, and

Imaging• Nano/Biophotonics

SYMPOSIUM CHAIRS:

Bruce TrombergBeckman Laser Institute, Univ. of California, Irvine (USA)

Gabriela ApiouHarvard Medical School, Wellman Ctr. for Photomedicine, Massachusetts General Hospital (USA)

SPIE Brain 2018 will highlight papers that describe the development of innovative technologies that will increase our understanding of brain function.• Clinical and Translational Neurophotonics• Neural Imaging, Sensing, Optogenetics, and

Optical Manipulation• Clinical Technologies, Laser Tissues Interaction,

and Tissue Engineering• Nanobiophotonicss

SYMPOSIUM CHAIRS:

David Boas Martinos Center, Massachusetts General Hospital, Harvard Medical School (USA)

Rafael Yuste Columbia Univ. (USA)

Brain/Neuro Research

SPIE Applications of 3D Printing 2018 highlights papers that showcase innovative ways to apply this multidimensional/multidisciplinary technology.• Additive Manufacturing• Selective Laser Melting, Maser Sintering, Laser

Photopolymerization• Novel Materials, Protean Materials, and Laser

Interactions• Software That Increases Efficiencies and Speed• In-situ Sensors or Probes to Verify and Quantify

Additive Manufacturing Processes in Real Time• Conformal Photonics/Electronics

SYMPOSIUM CHAIR:

Henry Helvajian The Aerospace Corp. (USA)

3D Printing

Steps:

APPLICATIONS TRACKS

* Choose your conference in BiOS, LASE, or OPTO.* When submitting your conference abstract, enter related Applications Track (translational re-

search, 3D printing, or brain/neuro research).* If paper is accepted in the conference, it will be cross-listed in the Applications Track of your

choice in online and printed programs.* To compete for a Best Paper Award in the Applications Track (optional), submit a 1-2-page sum-

mary when prompted by SPIE staff.


GENERAL INFORMATION


17 July 2017




3 January 2018



VENUEThe Moscone Center 747 Howard Street San Francisco, CA 94103-3118 USA

San Francisco is often called “Everybody’s Favorite City,” a title earned by its scenic beauty, cultural attractions, diverse communities, and world-class cuisine. Visitors rate the atmosphere and ambience as their top reason for visiting San Francisco. Mea-suring 49 square miles, this walkable city is dotted with landmarks like the Golden Gate Bridge, cable cars, and Alcatraz.

REGISTRATIONSPIE Photonics West registration will be available October 2017All participants, including invited speakers, con-tributed speakers, session chairs, co-chairs, and committee members, must pay a registration fee. Authors, coauthors, program committee members, and session chairs are accorded a reduced sympo-sium registration fee.

Fee information for conferences, courses, a registra-tion form, and technical and general information will be available on the SPIE website in October 2017.

HOTEL INFORMATIONOpening of the hotel reservation process for SPIE Photonics West 2018 is scheduled for June 2017. SPIE will arrange special discounted hotel rates for SPIE conference attendees.

The website will be kept current with any updates.

STUDENT TRAVEL GRANTSA limited number of SPIE student travel grants will be awarded based on need. Applications must be received no later than 20 November 2017. Eligible applicants must present an accepted paper at this meeting. Offer applies to undergraduate/graduate students who are enrolled full-time and have not yet received their PhD.

CLEARANCE INFORMATIONIf government and/or company clearance is required to present and publish your presenta tion, start the process now to ensure that you receive clearance if your paper is accepted.

IMPORTANT NEWS FOR ALL VISITORS FROM OUTSIDE THE UNITED STATESFind important requirements for visiting the United States on the SPIE Photonics West website. There are new steps that ALL visitors to the United States need to follow.

Online at: www.spie.org/visa

Be part of the world’s largest collection of optics and photonics applied research

SUBMIT YOUR ABSTRACT TODAY


Optics & Astronomy

Biomedical Optics

Optoelectronics & Communications

Defense & Security

Energy

Lasers

Nano/Micro Technologies

Sensors

Search over 460,000 research papers

ABSTRACT SUBMISSION


SPIE International Headquarters PO Box 10 Bellingham, WA 98227-0010 USA Tel: +1 360 676 3290 / Fax: +1 360 647 1445 [email protected] / www.SPIE.org

SPIE Europe Office 2 Alexandra Gate Ffordd Pengam, Cardiff, CF24 2SA UK Tel: +44 29 2089 4747 / Fax: +44 29 2089 4750 [email protected] / www.SPIE.org

By submitting an abstract, I agree to the following conditions:

AN AUTHOR OR COAUTHOR (INCLUDING KEYNOTE, INVITED, ORAL, AND POSTER PRESENTERS) WILL:• Register at the reduced author registration rate (current

SPIE Members receive an additional discount on the registration fee).

• Attend the meeting.• Make the presentation as scheduled in the program.• Submit a manuscript (6 pages minimum for LASE & OPTO;

4 pages minimum for BiOS; 20 pages maximum) for publication in the Proceedings of SPIE in the SPIE Digital Library.

• Obtain funding for registration fees, travel, and accommo-dations, independent of SPIE, through their sponsoring organizations.

• Ensure that all clearances, including government and company clearance, have been obtained to present and publish. If you are a DoD contractor in the USA, allow at least 60 days for clearance.

Submit an abstract and summary online at: www.spie.org/lase18call• Please submit a 250-word text abstract for technical

review purposes that is suitable for publication. SPIE is authorized to circulate your abstract to conference committee members for review and selection purposes.

• Please also submit a 100-word text summary suitable for early release. If accepted, this summary text will be published prior to the meeting in the online or printed programs promoting the conference.

• To provide the research community with enhanced access to information presented at SPIE conferences, SPIE will record the audio plus screen content of oral presenta-tions and, with author permission only, will publish the recordings on the SPIE Digital Library. When submitting an abstract, you will be asked to respond to the permission request.

• Some conferences have additional requirements. Please check the individual call for papers to see if the confer-ence you are submitting to requires a longer abstract, a supplemental file, etc.

• Only original material should be submitted.• Abstracts should contain enough detail to clearly convey

the approach and the results of the research.• Commercial papers, papers with no new research/devel-

opment content, and papers where supporting data or a technical description cannot be given for proprietary reasons will not be accepted for presentation in this conference.

• Please do not submit the same, or similar, abstracts to multiple conferences.

SPECIAL TOPICS HIGHLIGHTED IN PROGRAM• If your submission is related to Translational Research,

Brain, or 3D Printing, please indicate this when prompted during the abstract submission. If your paper is accepted, and you have indicated interest in Translational Research, Brain, or 3D Printing, the contact author will be emailed after we publish the program, and invited to submit a 1-2 page summary explaining how their research is related to that special topic.

• TRANSLATIONAL RESEARCH: If your paper is chosen by the selection committee, your presentation will be cross-listed in the SPIE Translational Research Virtual Program, and you will be eligible to win an SPIE Trans-lational Research Best Paper Award.

• BRAIN: If your paper is selected by the selection com-mittee, your presentation will be cross-listed in the SPIE Brain Virtual Program.

• 3D PRINTING: If your paper is selected by the 3D Printing committee, your presentation will be cross-listed in the SPIE Applications of 3D Printing Virtual Program and you will be eligible to win an SPIE Applications of 3D Printing Award.

REVIEW, NOTIFICATION, AND PROGRAM PLACEMENT INFORMATION• To ensure a high-quality conference, all submissions will

be assessed by the Conference Chair/Editor for technical merit and suitability of content.

• Conference Chair/Editors reserve the right to reject for presentation any paper that does not meet content or presentation expectations.

• The contact author will receive notification of acceptance and presentation details by e-mail the week of 25 Sep-tember 2017.

• Final placement in an oral or poster session is subject to the Chairs’ discretion.

INFORMATION ON THE PROCEEDINGS OF SPIE IN THE SPIE DIGITAL LIBRARYManuscript instructions are available at: www.spie.org/manuscripts• All authors (oral, poster, keynote, and invited) are expect-

ed to submit a manuscript containing at least 6 pages for LASE & OPTO, and at least 4 pages for BiOS.

• Conference Chair/Editors may require manuscript revi-sion before approving publication and reserve the right to reject for publication any paper that does not meet acceptable standards for a scientific publication.

• Conference Chair/Editors’ decisions on whether to allow publication of a manuscript is final.

• Authors must be authorized to transfer copyright of the manuscript to SPIE, or provide a suitable publication license.

• Only papers presented at the conference and received according to publication guidelines and timelines will be published in the conference Proceedings of SPIE in the SPIE Digital Library.

• SPIE partners with relevant scientific databases to enable researchers to find the papers in the Proceedings of SPIE easily. The databases that abstract and index these pa-pers include Astrophysical Data System (ADS), Chemical Abstracts (relevant content), Ei Compendex, CrossRef, Current Contents, DeepDyve, Google Scholar, Inspec, Portico, Scopus, SPIN, and Web of Science Conference Proceedings Citation Index.



Gain visibility at the world’s largest photonics technologies eventJoin us in San Francisco and gain career insights as well as some relaxation time at the Moscone Center. Whether you are presenting to your peers, or are looking to gain further knowledge to enhance your research area, we welcome your participation.

Every year over 20,000 people come to hear the latest research and find the latest devices and systems driving technology markets including state-of-the art medical technologies, the Internet of things, smart manufacturing and “Industry 4.0,” autonomous vehicles, scientific research, communications, displays, and other solutions powered by photonics.

SPIE AND SAN FRANCISCO ARE BRINGING YOU MORE OF WHAT YOU NEED FOR SUCCESS

• Present a paper and participate in the conference

• Meet the top researchers and experts in the field

• Receive feedback from your peers

• Hear the latest research

• Network with your colleagues

• SPIE conference papers are published in the SPIE Digital Library, the world’s largest collection of optics and photonics research

• Publish an accepted paper in one of SPIE Journals

• Walk the floor at two world class exhibitions

SPIE BIOS Expo: 27–28 January 2018, kicks off the Photonics West week. SPIE Photonics West Exhibition: 30 January–1 February 2018, is the flagship event for the photonics industry.

PLAN TO ATTEND SPIE PHOTONICS WEST 2018 IN SAN FRANCISCO

www.spie.org/LASE18callSubmit abstracts by 17 July 2017

Two ExhibitionsBIOS Expo: 27–28 January 2018 Photonics West: 30 January–1 February 2018

Participate in the premier technical event and marketplace for the photonics, biophotonics, and laser industry

Present your work at Photonics West, the premier laser, photonics, biomedical optics conference: two exhibitions, a wide range of papers and courses on biomedical optics, biophotonics, industrial lasers, optoelectronics, microfabrication, MOEMS-MEMS, displays, and more.

BIOS Expo200 CompaniesThe world’s largest biomedical optics and biophotonics exhibition.

If your BIOS, LASE, or OPTO paper has applications in translational research, brain research, or 3D printing, then you are eligible to also submit your abstract to the Photonics West Applications Tracks. Details provided in the online submission webpage.

20,000 ATTENDEES

4,800 PAPERS

3 SYMPOSIA

60 COURSES

Topics include biomedical optics, photonic therapeutics and diagnostics, neurophotonics, tissue engineering, translational research, tissue optics, clinical technologies and systems, biomedical spectroscopy, microscopy, imaging, nano/biophotonics.

Topics include laser source engineering, nonlinear optics and beam guiding, laser manufacturing, laser micro/nano applications, 3D manufacturing, and more.

Topics include optoelectronic materials and devices, photonic integration, displays and holography, nanotechnologies in photonics, advanced quantum and optoelectronic applications, semiconductor lasers and LEDs, MOEMS-MEMS, optical communications: devices to systems.

Photonics West Exhibition1,300 CompaniesThe flagship event for companies in the photonics industry.

Translational Research Brain/Neuro Research3D Printing

Conferences + Courses27 January–1 February 2018The Moscone Center · San Francisco

Non-

Profi

t Org

.U.

S. P

osta

ge

Paid

SPIE

ww

w.s

pie

.org

/LA

SE

call

P.O

. Box

10

Belli

ngha

m, W

A 98

227-

0010

USA

P.O

. Box

10

Belli

ngha

m, W

A 98

227-

0010

USA

CA

LL F

OR

PAP

ER

S

LAS

E20

18

Su

bm

it a

bst

ract

s b

y 17

Ju

ly 2

017

ww

w.s

pie

.org

/LA

SE18

call

Pre

sent

you

r re

sear

ch o

n la

ser

te

chno

log

y an

d in

dus

tria

l ap

plic

atio

ns

27 J

anua

ry-1

Feb

ruar

y 20

18T

he

Mo

sco

ne

Cen

ter

San

Fra

nci

sco

Date post:	27-May-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times