LaserJet 4SI MX

LaserJet 4Si MXHP Parts Reference Guide™

www.hp.com/go/hpparts

AccessoriesCleaning Supplies

5090-3379 Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for clening up toner spills

KitC2087-69001 Maintenance kit - Replacement parts after 200K pages (240V) includes, transfer roller & clip, 6 pickup separation rollers,

duplex roller, and (240V) fusing assemblyNO LONGER SUPPLIEDREQUIRES RETURN OF DEFECTIVE PART

C2087-67902 New Part for C2087-69001

C2801A Output StackerArm

3 C2801-40001 Height sensor arm

Brake4 C2801-80024 Paper brake - Paper stop for elevator module

NO LONGER SUPPLIED

Cable5 C2801-60003 Interface cable which connects the optional output stacker and the printer sensor board

C2801-80014 Output stacker elevator module ribbon cable

C2801-80026 Phone cable assembly - 4 pin (F) RJ-11 connector to 2 pin (F) connector - 22.1cm (8.7 inches) long

Caster1492-0167 Caster (without brake)

NO LONGER SUPPLIED1492-0168 Caster (with brake)

NO LONGER SUPPLIED

CoverC2801-40002 Left cover of transport module - Of optional output stacker

C2801-40003 Right cover (on electronic box) of transport module - Is part of optional output stacker

DiskC2801-80025 Non-skid disks - Keeps printer in place on cabinet (8 disk per package) - For optional output stacker

DoorC2801-80012 Cabinet door - For C2801A Output Stacker

NO LONGER SUPPLIED

Electronic BoxC2801-60001 Electronic box (120v)

NO LONGER SUPPLIEDC2801-60002 Electronic box (240v)

Elevator16 C2801-80008 Elevator module - Includes rails and ribbon cable - Mounted in output stacker cabinet

NO LONGER SUPPLIEDC2801-60001 New Part for C2801-80008

GuideC2801-80017 Paper exit guide - Provides a smooth paper path from the printer to the transport assembly (Includes installation

instructions)NO LONGER SUPPLIED

RB1-0557-040CN Paper guide - Attaches to the delivery cover on the printer

Holder19 C2801-80022 Power module holder - Holds power module for paper feeder

NO LONGER SUPPLIED

© 2004 Hewlett-Packard Development Company, L.P. venerdì 30 luglio 2004 1



C2801A Output StackerLatch

C2801-80013 Latch - For door of optional output stacker

ManualC2801-90003 C2801A output stacker user's manual

NO LONGER SUPPLIED

Motor22 C2801-80006 Transport module stepper motor23 C2801-80009 Elevator motor

Shelf24 C2801-80021 Paper feeder support shelf

ShieldC2801-80007 Decurler roller wrap shield

Solenoid26 C2801-80019 Solenoid for elevator drawer of optional output stacker

NO LONGER SUPPLIED

Switch27 C2801-80015 Door interlock switch28 C2801-80020 Stacker full switch

Transport Module29 C2801-69004 Transport module of optional output stacker - Does NOT include height sensor arm, electrical box, or left & right covers

C2920/1A Paper FeederDoor

30 5042-0302 Rear door - Of paper feeder assemblyNO LONGER SUPPLIED

Holder31 C2801-80022 Power module holder - Holds power module for paper feeder

NO LONGER SUPPLIED

ManualC2921-90003 C2920A/21A paper feeder service manual

NO LONGER SUPPLIEDC2921-90004 C2920A/21A paper feeder user's manual

NO LONGER SUPPLIED

Motor5181-8774 Elevator motor

5181-8775 Feed roller motorNO LONGER SUPPLIED

Nosepiece36 5181-8721 Nosepiece assembly - Inserts into printer - P/O paper feeder - For letter size (8.5 x 11 inches) and serial prefix <&=

H2108818NO LONGER SUPPLIED

37 5063-1261 Nosepiece assembly - Inserts into printer - P/O paper feeder - For letter size (8.5 x 11 inches) and serial prefix =&> H3100001NO LONGER SUPPLIED

38 5181-8711 Nosepiece assembly - Inserts into printer - P/O paper feeder - For A4 size (210mm x 297mm) and serial prefix <&= H2004726NO LONGER SUPPLIED

39 5063-1260 Nosepiece assembly - Inserts into printer - P/O paper feeder - For A4 size (210mm x 297mm) and serial prefix >&= H3000001NO LONGER SUPPLIED




C2920/1A Paper FeederPC Board

41 5063-1219 Paper feeder main logic boardNO LONGER SUPPLIED

42 5063-1249 Paper feeder main logic boardNO LONGER SUPPLIED

Paper FeederC2921-63001 Paper input feeder assembly - Holds 1500 sheets

Pedestal5181-8710 Printer pedestal - Used with paper feeder assembly

NO LONGER SUPPLIED

Power Cord8120-1378 Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in USA, Canada, Latin

America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)

Power Module5181-8759 Power module - Supplies power to paper feeder assembly

NO LONGER SUPPLIED

Roller Kit5181-8708 Replacement feed roller kit - Includes two rollers, retainer clips and instructions

Sensor5181-8719 Nosepiece Sensor

NO LONGER SUPPLIED48 5181-8763 Nosepiece Sensor

Shelf49 C2801-80021 Paper feeder support shelf

Duplexing Assembly PartsCable

50 RG5-0109-000CN Cable assembly - From DC controller to duplex board

Duplexer51 C2061-69001 Duplexer assembly - For 2 sided printing

NO LONGER SUPPLIED

Guide5181-8709 Duplex paper guide - In paper feeder assembly - Large curved metal piece that guides paper back into duplexer

NO LONGER SUPPLIED

Motor53 RH7-1102-000CN Horizontal registration motor54 RH7-1103-000CN Switchback motor

PC Board55 RG5-0052-060CN Duplex drive board - In (Optional) duplexing unit

Roller56 RF5-0081-000CN Duplex roller (D-shaped) - In (Optional) duplexing unit

Electronic AccessoriesCable (Interface)

24540-80010 Centronics (parallel) cable - 36 pin (M) to 25 pin (M) - 2.0m (6.6ft) long

5063-1256 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1257 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2950A IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1256 New Part for C2950A




Electronic AccessoriesCable (Interface)

C2951A IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2990A IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36 pin (M) Centronics (type B) - 1.8m (6ft) longNO LONGER SUPPLIED

C2991A IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36 pin (M) Centronics (type B) - 3.0m (10ft) longNO LONGER SUPPLIED

Envelope FeederC2060-69001 Automatic envelope feeder - Holds 100 envelopes

NO LONGER SUPPLIED

Memory (Product)C2065A 4MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX

NO LONGER SUPPLIEDC2066A 8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX

Memory (SIMM)D2150-69001 1MB, 80nS, 36-bit SIMM memory module

NO LONGER SUPPLIEDD2152-69001 8MB, 80nS, 36-bit SIMM memory module

REQUIRES RETURN OF DEFECTIVE PARTD2152-63001 New Part for D2152-69001D2156-69001 4MB, 80nS, 36-bit SIMM memory module

REQUIRES RETURN OF DEFECTIVE PARTD2156-63001 New Part for D2156-69001D2381-63001 2MB, 80nS, 36-bit SIMM memory module

Upgrade KitC2018-67901 Upgrade kit - If printer is non-Energy Star Compliant, this kit makes it compliant - Includes SIMM for formatter board

NO LONGER SUPPLIED

External Case PartsArm

72 RG5-0070-000CN Bin full sensor arm - 'T' shaped arm with rollers on top cover output binNO LONGER SUPPLIED

Button73 RG5-0128-000CN Power switch button

NO LONGER SUPPLIED

Cover74 RB1-0822-000CN Right side cover - Has built in fan grille75 RB1-0823-000CN Right rear cover

NO LONGER SUPPLIED76 RB1-0824-000CN Lower rear cover77 RB1-0825-000CN Front feeder cover78 RG5-0071-140CN Top cover assembly - Has recess for 'face down' paper output79 RG5-0122-000CN Left side cover - Has cutout for duplex access door

NO LONGER SUPPLIED80 RG5-0163-000CN Front upper cover (L-shaped)81 RG5-0174-000CN Front cover assembly - Has holes for paper trays & control panel

NO LONGER SUPPLIED

Door82 RB1-0732-000CN Font cartridge door (Cover) - Spring loaded - On front panel

NO LONGER SUPPLIED




External Case PartsDoor

83 RB1-0756-000CN Duplex access door - Fold down door on left side of printer

Foot84 RB1-0692-000CN Rubber foot

Holder85 RB1-0485-000CN Top cover output bin full sensor arm holder

NO LONGER SUPPLIED

Latch86 XZ9-0379-000CN Door latch insert (Black)

Plate87 C2009-00006 Lower MIO Cover Plate - For empty MIO slot

NO LONGER SUPPLIED88 C2009-60109 Upper MIO Cover Plate - For empty MIO slot

Spring89 RB1-0734-000CN Torsion spring for font cartridge door

Tray90 RG5-0073-000CN Output tray assembly - Folds down - For rear paper output

Fusing Assembly PartsFusing Assembly

91 33491-69012 Fusing assembly (120V, 60Hz) - Bonds toner to paper by heatREQUIRES RETURN OF DEFECTIVE PART

RG5-0046-530CN New Part for 33491-6901292 33491-69013 Fusing assembly (240V, 50Hz) - Bonds toner to paper by heat

REQUIRES RETURN OF DEFECTIVE PARTRG5-0047-530CN New Part for 33491-69013

93 5181-2254 Fusing assembly (240V, 50Hz) - Bonds toner to paper by heat - In quantity price break packaging (Contains 5 New fusing assemblies)NO LONGER SUPPLIED

94 5181-2255 Fusing assembly (240V, 50Hz) - Bonds toner to paper by heat - In quantity price break packaging (Contains 10 New fusing assemblies)

Hardware95 RB1-0854-020CN Fusing assembly mounting screw

Labels and TransparenciesFilm (Transparency)

92296U LaserJet printer transparency film - A4 size (21.0cm x 29.7cm) - 50 sheets per box

92296T LaserJet printer transparency film - A size (8.5 x 11-inches) - 50 sheets per box

Labels92296A LaserJet printer addressing labels - 2.54cm (1.00in) x 6.67cm (2.63in) labels - 30 per sheet - 100 sheets per box

NO LONGER SUPPLIED92296B LaserJet printer addressing labels - 3.38cm (1.33in) x 10.2cm (4.00in) labels - 14 per sheet - 100 sheets per box

NO LONGER SUPPLIED92296C LaserJet printer addressing labels - 2.54cm (1.00in) x 10.2cm (4.00in) labels - 20 per sheet - 100 sheets per box

NO LONGER SUPPLIED92296D LaserJet printer addressing/shipping labels - 5.08cm (2.00in) x 10.2cm (4.00in) labels - 10 per sheet - 100 sheets per

boxNO LONGER SUPPLIED

92296E LaserJet printer shipping labels - 8.47cm (3.33in) x 10.2cm (4.00in) labels - Six per sheet - 100 sheets per boxNO LONGER SUPPLIED




Labels and TransparenciesLabels

92296F LaserJet printer return address labels - 1.27cm (0.50in) x 4.45cm (1.75in) labels - 80 per sheet - 25 sheets per boxNO LONGER SUPPLIED

92296G LaserJet printer file folder labels - 1.69cm (0.67in) x 8.73cm (3.44in) labels - 30 per sheet - 25 sheets per boxNO LONGER SUPPLIED

92296H LaserJet printer labels for 3.5-inch diskettes - 7.00cm (2.75in) x 7.00cm (2.75in) labels - Nine per sheet - 70 sheets per boxNO LONGER SUPPLIED

92296J LaserJet printer labels for 5.25-inch diskettes - 3.81cm (1.50in) x 10.2cm (4.00in) labels - 12 per sheet - 70 sheets per boxNO LONGER SUPPLIED

92296K LaserJet printer full sheet label - A size (8.5 x 11-inches) label - One per sheet - 100 sheets per boxNO LONGER SUPPLIED

92296L LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 14 per sheet - 100 sheets per boxNO LONGER SUPPLIED

92296M LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.38cm (1.33in) labels on A4 size (21.0cm x 29.7cm) sheet - 16 per sheet - 100 sheets per boxNO LONGER SUPPLIED

92296N LaserJet/DeskJet printer labels - 6.35cm (2.52in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 21 per sheet - 100 sheets per boxNO LONGER SUPPLIED

92296P LaserJet/DeskJet printer labels - 10.0cm (3.94in) x 5.10cm (2.01in) labels on A4 size (21.0cm x 29.7cm) sheet - 10 per sheet - 100 sheets per boxNO LONGER SUPPLIED

92296R LaserJet/DeskJet printer labels - 20.0cm (7.86in) x 28.9cm (11.4in) labels on A4 size (21.0cm x 29.7cm) sheet - One per sheet - 100 sheets per boxNO LONGER SUPPLIED

Logic/Control ElectronicsCable

113 RG5-0130-000CN Cable assembly - From DC controller to formatter board114 RG5-0156-030CN Cable assembly - From formatter board to control panel assembly

Control Panel115 RG5-0162-000CN Control panel assembly - Includes display and keypad

PC Board116 C2009-67901 Formatter (Main logic) board117 C2009-69002 DC controller board

REQUIRES RETURN OF DEFECTIVE PARTRG5-0842-000CN New Part for C2009-69002

PC Board (Interface)J2341-60128 AppleTalk (LocalTalk) interface board - Has DIN-8 connector

J2552-69013 LAN and LocalTalk interface - EtherTwist (10Base-T), ThinLAN (10Base-2), and LocalTalk (DIN-8) connectors

J2553-69003 EtherTwist 10Base-T, ThinLAN 10Base-2, and LocalTalk board

PostScriptC2013-69001 Postscript SIMM (Level 2) - With 35 adobe fonts

Optional InterfacesBulkhead

C2009-60111 MIO slot bulkhead

J2553-60015 MIO slot bulkheadNO LONGER SUPPLIED




Optional InterfacesInterface (Module)

J4101-61011 External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network - Does NOT include power module - (J4101A, J4101B)

Interface (Product)J2552B LAN & LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors

NO LONGER SUPPLIEDJ2556B EtherTwist (10Base-T) or 100Base-TX LAN interface board - Has an RJ-45 connector

NO LONGER SUPPLIEDJ2590A External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3

parallel (DB-25) output connectorsNO LONGER SUPPLIED

J2591A External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectorsNO LONGER SUPPLIED

J3258B External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

J3264A External JetDirect 500X token ring interface module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN

J3265A External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

J4100A JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors

J4105A JetDirect 400N modular input/output (MIO) internal print server - Provides token ring network connection using RJ45 or DB9 connectors

J4106A JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector

ModuleJ2382-69003 External JetDirect LAN interface module with ethertwist (10Base-T) and ThinLAN (10BASE-2) connectors

J2383-61005 External token ring interface module - Has DB-9 connector

J2590-69001 External JetDirect LAN interface module with RJ-45 connector for ethertwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectorsREQUIRES RETURN OF DEFECTIVE PART

J2590-61011 New Part for J2590-69001J2591-69001 External JetDirect LAN interface module with ethertwist (10Base-T) and ThinLAN (10BASE-2) connectors

J2592-69001 External JetDirect LAN interface module with ethertwist (10Base-T) connectorREQUIRES RETURN OF DEFECTIVE PART

J2592-61001 New Part for J2592-69001J2593-69001 External JetDirect LAN interface module with Ethertwist (10Base-T) and ThinLAN (10BASE-2) input connectors and 3

parallel (DB-25) output connectors - (part of J2593A)J2594-69001 External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and 3 parallel (DB-25) output

connectors - (part of J2594A)REQUIRES RETURN OF DEFECTIVE PART

J2594-61011 New Part for J2594-69001J3258-61011 External JetDirect LAN interface module with EtherTwist (10Base-T) connector - (J3258A, J3258B)

J4102-69011 External JetDirect LAN interface module with EtherTwist (10Base-T) connector - (J4102A, J4102B)REQUIRES RETURN OF DEFECTIVE PART

J4102-61011 New Part for J4102-69011

Module (Product)J4101B External JetDirect LAN interface module with EtherTwist (10Base-T/Base-TX) connector

J4102B External JetDirect LAN interface module with EtherTwist (10Base-T) connector




Optional InterfacesPC Board (Interface)

J2341-60128 AppleTalk (LocalTalk) interface board - Has DIN-8 connector

J4100-69001 JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors - (J4100A)REQUIRES RETURN OF DEFECTIVE PART

J4100-61001 New Part for J4100-69001J4106-69001 Replacement JetDirect 400N modular input/output (MIO) internal print server

REQUIRES RETURN OF DEFECTIVE PARTJ4106-61001 New Part for J4106-69001J2552-69013 LAN and LocalTalk interface - EtherTwist (10Base-T), ThinLAN (10Base-2), and LocalTalk (DIN-8) connectors

J2553-69003 EtherTwist 10Base-T, ThinLAN 10Base-2, and LocalTalk board

Power Cord8120-1351 Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V in the UK, Hong Kong,

Singapore, Malaysia, and Brunei)8120-1369 Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 240V in Australia, New Zealand,

and China)8120-1378 Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in USA, Canada, Latin

America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)8120-1689 Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh,

Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)8120-2104 Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Switzerland)

8120-2956 Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Denmark)

8120-4753 Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 100V in Japan)

8120-6302 'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output

Power Module0950-2372 Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts - For

J2382/83A/B0950-3169 Wall mount power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA (USA, Canada) - For use

with the J2592A external JetDirect LAN interface module0950-3170 Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 300mA (Europe, Israel) - For use with the J2592A

external JetDirect LAN interface module0950-3171 Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U.K., Hong Kong) - For use with the

J2592A external JetDirect LAN interface module0950-3172 Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia) - For use with the J2592A external

JetDirect LAN interface module0950-3348 Wall mount power supply module (MEI-AH ED12006) - 110-127VAC input, 57-63Hz - 13VDC output, 800mA, 10.4 watts

(for use in the United States and Canada) - For models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B

0950-3349 Wall mount power supply module (MEI-AH ED12007) - 230VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (for use in Europe and Israel) - For JetDirect/infrared interface models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B

0950-3350 Wall mount power supply module (MEI-AH ED12008) - 220-240VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (for use in the United Kingdom) - For JetDirect/infrared interfaces J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B

0950-3351 Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in South Korea) - For JetDirect/infrared interface models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B

0950-3352 Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan) - For JetDirect/infrared interface models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B

0950-3354 Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (for use in South Africa) - For JetDirect/infrared interface models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B




Optional InterfacesPower Module

9100-5176 Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong) - For JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B

0950-3350 New Part for 9100-5176

Optional Paper TraysCover

RG1-2802-000CN Tray top cover - Includes manual feed guide arms172 RG5-0171-000CN Replacement top cover173 RG5-0172-000CN Replacement top cover

Tray174 92291B HP LaserJet IIISi Letter Paper input tray - Holds 500 sheets of 8.5in x 11in letter size paper175 92291C HP LaserJet IIISi Legal Paper input tray - Holds 500 sheets of 8.5in x 14in legal size paper176 92291D HP LaserJet IIISi A4 Paper input tray - Holds 500 sheets of 8.3in x 11.6in A4 size paper177 92291E HP LaserJet IIISi Executive Paper input tray - Holds 500 sheets of 7.25in x 10.5in Executive size paper

NO LONGER SUPPLIED

Other AccessoriesBrush

178 FB1-0733-000CN Brush - For cleaning antistatic teeth by transfer rollerNO LONGER SUPPLIED

CabinetC2917A Printer cabinet - Has support shelf for paper feeder assembly

NO LONGER SUPPLIED

Cartridge180 92291A Black toner (EP) cartridge

KitC2062-69001 Maintenance kit - Replacement parts after 200K pages (120V) includes, transfer roller and clip, 6 pickup separation

rollers, duplex roller, and (120V) fusing assemblyNO LONGER SUPPLIED

C2062A Maintenance kit - Replacement parts after 200K pages (120V) includes, transfer roller & clip, 6 pickup separation rollers, duplex roller, and (120V) fusing assemblyNO LONGER SUPPLIED

C2087-67902 Maintenance kit - Replacement parts after 200K pages (240V) includes, transfer roller & clip, 6 pickup separation rollers, duplex roller, and (240V) fusing assemblyNO LONGER SUPPLIED


ManualC2010-90901 LaserJet 4Si/4Si MX printer user's reference manual

NO LONGER SUPPLIEDC2010-90939 33491A/C2010A LaserJet IIISi/4Si combined service manual

C2011-90915 C2011A LaserJet 4Si MX 'Getting Started' manual (English)NO LONGER SUPPLIED

5021-8943 LaserJet quick reference guide - Volume 1 of 2 volume set

5090-3390 LaserJet quick reference guide - Volume 2 of 2 volume set

Manual Kit5021-0377 HP-GL/2, PCL5 and PJL technical reference manual kit

C2011-99039 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (German)NO LONGER SUPPLIED




Other AccessoriesManual Kit

C2011-99041 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (Danish)NO LONGER SUPPLIED

C2011-99042 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (European English)NO LONGER SUPPLIED

C2011-99043 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (Italian)NO LONGER SUPPLIED

C2011-99044 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (Swedish)NO LONGER SUPPLIED

C2011-99045 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (Dutch)NO LONGER SUPPLIED

C2011-99046 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (French)NO LONGER SUPPLIED

C2011-99047 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (Norwegian)NO LONGER SUPPLIED

C2011-99048 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (Finnish)NO LONGER SUPPLIED

C2011-99049 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (Portuguese)NO LONGER SUPPLIED

C2011-99051 LaserJet 4Si MX manual set - Includes operator's, getting started, user's reference, & 5 quick reference guides - Also includes software application notes & JetDirect manuals (US English)NO LONGER SUPPLIED

Roller KitH3976-60001 Paper pickup repair kit - Contains 6 Feed/Separation rollers - Procedure requires service manual

SoftwareC6072-60301 HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks

(English)C6072-60304 HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks

(German)C6072-60305 HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks

(French)C6072-60306 HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks

(Spanish)C6072-60307 HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)

Training KitC2010-67909 Self paced training kit for LaserJet 3Si, 4Si and 4Simx - Includes service manual, NTSC format video (VHS) and five

testsNO LONGER SUPPLIED

C2010-67910 Self paced training kit for LaserJet 3Si, 4Si and 4Simx - Includes service manual, PAL format video (VHS) and five testsNO LONGER SUPPLIED

Other Internal Parts




Other Internal PartsCable

210 RG5-0103-000CN Cable assembly - From DC controller to laser/scanner assembly211 RH2-5104-000CN Fiber optic cable - From DC controller to fiber optic lens

NO LONGER SUPPLIED

Fan212 RH7-1104-000CN Fusing assembly fan - 24VDC

NO LONGER SUPPLIED213 RH7-1162-000CN Fan assembly214 RH7-1163-000CN Formatter board fan

Laser/Scanner215 C2009-69003 Laser/scanner assembly


Mirror216 RG5-0069-000CN Mirror assembly - Mounted on underside of top cover

NO LONGER SUPPLIED

PC Board217 RG5-0042-000CN Main motor board - With mount218 RG5-0094-000CN Sensor board

Paper Path PartsArm

219 RB1-0260-000CN Arm - Holds right side of transfer rollerNO LONGER SUPPLIED

Block220 RG5-0038-000CN Left block - Side of main structure before fusing assembly

NO LONGER SUPPLIED221 RG5-0039-070CN Right block - Side of main structure before fusing assembly

Cable222 RG5-0108-000CN Cable assembly - From DC controller to paper input board

Clip223 RB1-0818-030CN Transfer roller retaining clip (Blue)

Cover224 RG5-0067-180CN Rear delivery cover assembly - Includes flapper, rollers, and New style paper guide

Flapper225 RF5-0091-000CN Flapper - Directs paper path - To top or rear output tray

Guide226 RB1-0221-000CN Upper paper transfer guide227 RB1-0472-030CN Upper delivery guide228 RG5-0045-000CN Transfer guide - Ribbed plastic plate behind transfer roller

NO LONGER SUPPLIED

Job Offset229 C2009-69008 Job offset assembly

NO LONGER SUPPLIED

KitC2062-69001 Maintenance kit - Replacement parts after 200K pages (120V) includes, transfer roller and clip, 6 pickup separation

rollers, duplex roller, and (120V) fusing assemblyNO LONGER SUPPLIED





Paper Path PartsKit

C2087-67902 Maintenance kit - Replacement parts after 200K pages (240V) includes, transfer roller & clip, 6 pickup separation rollers, duplex roller, and (240V) fusing assemblyNO LONGER SUPPLIED


Motor234 RG5-0027-000CN Motor assembly - Drive for paper pickup roller

NO LONGER SUPPLIED235 RG5-0040-060CN Main motor assembly

PC Board238 RG5-0034-100CN Paper input board

Paper Input Unit236 C2009-69007 Paper input unit - Complete paper feed


Paper Refeed237 RG5-0056-000CN Paper refeed unit

Roller239 RF5-0041-020CN Pickup separation roller - In paper input unit

NO LONGER SUPPLIED240 RG5-0141-000CN Transfer charge roller (Black) - Held in place w/ blue clip

Roller Assembly241 RG5-0161-090CN Registration assembly - Next set of rollers after paper pickup

NO LONGER SUPPLIED

Sensor242 RG5-0116-000CN Output door sensor assembly

NO LONGER SUPPLIED243 WG8-5038-020CN Photo sensor

NO LONGER SUPPLIED

Solenoid244 RG5-0063-000CN Flapper solenoid (SL6) - Controls rear or top paper output

NO LONGER SUPPLIED245 RG5-0064-000CN Duplex deflector (Feed guide) solenoid (SL7) - In job offset246 RG5-0065-060CN Job offset solenoid247 RH7-5031-000CN Clutch solenoid (24VDC) - Engages registration roller clutch

NO LONGER SUPPLIED

Spring248 RS5-2021-000CN Compression spring for arm that holds right side of transfer roller

Power Supplies and PartsCable

249 RG5-0104-000CN Cable assembly which connects the DC controller to the high voltage power supplyNO LONGER SUPPLIED

Power Cord8120-1351 Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V in the UK, Hong Kong,

Singapore, Malaysia, and Brunei)8120-1369 Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 240V in Australia, New Zealand,

and China)




Power Supplies and PartsPower Cord

8120-1689 Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)

8120-2104 Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Switzerland)

8120-2371 Power cord (Black) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA and Canada)

8120-2956 Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Denmark)

8120-4211 Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 240V in South Africa and India)

Power Supply257 RG5-0164-000CN AC power supply/sensor board - 120VAC, 60Hz258 RG5-0165-000CN AC power supply/sensor board - 240VAC, 50Hz259 RG5-0166-060CN AC power supply - 120VAC, 60Hz260 RG5-0167-060CN AC power supply - 240VAC, 50Hz261 RG5-0168-000CN DC power supply assembly - 120VAC, 60Hz262 RG5-0169-000CN DC power supply assembly - 240VAC, 50Hz263 RG5-0170-080CN High voltage power supply assembly (transformer)

Shaft264 RB1-0811-000CN Power switch shaft - From front panel button to power switch

NO LONGER SUPPLIED

Switch265 RG5-0102-030CN Power switch assembly266 RH7-6020-000CN On/off rocker switch for power switch assembly - 250V, 16A

NO LONGER SUPPLIED




Major Assemblies (1 of 2)

_236

_237

_217

_ 235

_180

_220

_ 241

_ 221

_1, 92, 93, 94




Major Assemblies (2 of 2)

_ 116

_ 265

_ 259, 260

_ 115

_263

_261, 262

_117

_215

_229




C2801A Output Stacker Detail

_29

_22

_3

_28

_23

_26

_ 16

_ 27

_4




C2801A Output Stacker Major Components

_ 24, 49_5

_29

_19, 31




C2920/1A Paper Feeder

_ 41, 42

_36, 37, 38, 39

_48_30




Cassette Assembly

|172, 173

|174, 175, 176, 177




Control Panel Assembly

|115




Covers and Panels

/178

\75

/83

\82

/115

|81

|79

|80

\77

\76

\86

\89

|114

/74




Duplexing Assembly

|51

_53_ 56

_ 54

_ 55




Fan Assembly

/213




Fusing Assembly (1 of 2)

|91, 92, 94




Fusing Assembly (2 of 2)

|91, 93, 94




Internal Components (1 of 3)

\226

|249

|240

|228

|217

|242

|50

|91, 92, 93, 94

_220

/221

\263

_ 223

|95





\215

/211

\210

\243

\212





\259, 260

\261, 262

/222

/113

\87

\88

\214

|257, 258

\117

\218

\116




Job Offset Assembly

|245

|244

_229

|246




Left Main Block Assembly

|220




Main Motor Drive Train

|235




Main Switch Assembly

\84

|265

|73

/266

/264




Paper Input Unit (1 of 2)

_236

\239

\239

\239

\239

\239




Paper Input Unit (2 of 2)

\238

\239

_236




Paper Refeed Unit

|237




Pickup Roller Drive Assembly

|234




Registration Assembly

|241




Right Main Block Assembly

_248

_ 247

_219

|221




Top Cover Assembly (1 of 2)

|216

|78

|72

\85

\227




Top Cover Assembly (2 of 2)

\225

|224

|90




HP Parts Reference Guidehttp://www.hp.com/go/parts

HP PartSurferhttp://partsurfer.hp.com

HP Parts Ordering Informationhttp://www.hp.com/go/hpparts

HP Parts Questions/Commentshttp://partsurfer.hp.com/contactus.htm


Date post:	14-Dec-2015
Category:	Documents
Upload:	test
View:	222 times
Download:	0 times

LaserJet 4SI MX

Documents