document.xls, SPECTRALOCK Mini Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)4 1/4 4 1/4 5/16 1/8 17.8

Nominal Tile Size Coverage Calculator

Tile Size (inches) Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

1 1 1/4 10.3 5.3 3.7 2.9 2.4 2.1 1.8 1.72 2 1/4 20.4 10.3 7.0 5.3 4.3 3.7 3.2 2.9

4 1/4 4 1/4 31/99 34.3 17.3 11.6 8.8 7.1 5.9 5.1 4.54 8 1/2 26.9 13.5 9.0 6.8 5.5 4.6 4.0 3.56 6 1/2 30.2 15.2 10.2 7.7 6.2 5.2 4.5 3.98 8 3/8 53.7 26.9 18.0 13.6 10.9 9.1 7.8 6.9

12 12 3/8 80.4 40.3 26.9 20.3 16.2 13.6 11.7 10.213 13 3/8 87.1 43.6 29.1 21.9 17.6 14.7 12.6 11.116 16 3/8 107.1 53.7 35.7 26.9 21.6 18.0 15.5 13.618 18 3/8 120.5 60.3 40.2 30.3 24.2 20.3 17.4 15.224 24 3/8 160.6 80.4 53.5 40.3 32.2 26.9 23.1 20.3

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

LATICRETE SpectraLockTM Grout, Mini Unit

document.xls, SPECTRALOCK Full Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)4 1/4 4 1/4 5/16 1/8 71.2

Nominal Tile Size Coverage Calculator

Tile Size (inches) Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

1 1 1/4 41.4 21.4 14.7 11.5 9.5 8.2 7.3 6.72 2 1/4 81.5 41.4 28.0 21.4 17.4 14.8 12.9 11.5

4 1/4 4 1/4 31/99 137.2 69.1 46.3 35.1 28.2 23.7 20.5 18.14 8 1/2 107.5 54.0 36.1 27.3 21.9 18.4 15.8 14.06 6 1/2 121.0 60.8 40.6 30.7 24.7 20.7 17.8 15.78 8 3/8 214.8 107.8 72.0 54.3 43.6 36.5 31.4 27.6

12 12 3/8 321.7 161.3 107.5 81.1 64.9 54.3 46.6 41.013 13 3/8 348.5 174.7 116.4 87.8 70.3 58.8 50.5 44.316 16 3/8 428.7 214.8 143.1 107.8 86.3 72.2 61.9 54.318 18 3/8 482.2 241.5 160.9 121.2 97.0 81.1 69.5 61.024 24 3/8 642.6 321.7 214.2 161.3 129.0 107.8 92.4 81.1

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

LATICRETE SpectraLockTM Grout, Full Unit

document.xls, SPECTRALOCK Commercial Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)4 1/4 4 1/4 5/16 1/8 284.8

Nominal Tile Size Coverage Calculator

Tile Size (inches) Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

1 1 1/4 165.6 85.5 58.9 45.8 38.0 32.9 29.3 26.72 2 1/4 325.9 165.6 111.9 85.5 69.5 59.0 51.4 45.8

4 1/4 4 1/4 31/99 548.5 276.3 185.1 140.2 112.9 94.9 81.9 72.34 8 1/2 430.0 216.1 144.5 109.2 87.7 73.6 63.3 55.86 6 1/2 483.7 243.1 162.5 122.9 98.7 82.8 71.3 62.88 8 3/8 858.8 431.1 287.8 217.3 174.2 146.0 125.5 110.4

12 12 3/8 1286.6 645.0 430.0 324.2 259.6 217.3 186.5 163.813 13 3/8 1393.5 698.4 465.5 350.9 281.0 235.1 201.8 177.216 16 3/8 1714.3 858.8 572.2 431.1 345.0 288.5 247.5 217.318 18 3/8 1928.1 965.8 643.3 484.6 387.7 324.2 278.0 244.024 24 3/8 2569.7 1286.6 856.5 645.0 515.8 431.1 369.6 324.2

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

LATICRETE SpectraLockTM Grout, Commercial Unit

document.xls, SPECTRALOCK 2000 IG #2 Appendix B Page 7 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

SPECTRALOCK® 2000 IG, #2 Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)4 1/4 4 1/4 5/16 1/8 178.6

Nominal Tile Size Coverage Calculator

Tile Size (inches) Tiles per SF Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 3/8 1/2

0.0625 0.125 0.188 0.25 0.375 0.5

4 8 1/2 4.50 NR NR 91 69 46 354 8 1 16/85 4.50 NR NR 38 29 19 156 6 1/2 4.00 NR NR 102 77 52 39

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

document.xls, SPECTRALOCK 2000 IG #4 Appendix B Page 8 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

SPECTRALOCK® 2000 IG, #4 Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)20 20 5/16 1/8 1624.9

Nominal Tile Size Coverage Calculator

Tile Size (inches) Tiles per SF Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

0.0625 0.125 0.188 0.25 0.313 0.375 0.438 0.5

4 8 1/2 4.50 NR NR 181.2 137.0 110.0 92.3 79.5 70.04 8 1 16/85 4.50 NR NR 76.3 57.7 46.3 38.9 33.4 29.56 6 1/2 4.00 NR NR 203.9 154.1 123.8 103.9 89.4 78.7

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

document.xls, SPECTRALOCK 2000 IG #4 Appendix B Page 8 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

document.xls, PermaColor 25 lb bag Appendix B Page 10 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

LATICRETE PermaColor™ Grout, 25 lb. Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeWidth Length Thickness (inches)

4 4 5/16 1/8 161.7

Nominal Tile Size Coverage Calculator

Tile Size (inches) Tiles per SF Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 3/8 1/2

0.0625 0.125 0.188 0.25 0.375 0.5

1 1 1/4 144.00 100 51 35 28 20 162 2 1/4 36.00 196 100 67 51 36 28

4 1/4 4 1/4 5/16 7.97 331 167 112 85 57 446 6 1/2 4.00 291 146 98 74 50 388 8 3/8 2.25 517 259 173 131 88 66

12 12 3/8 1.00 774 388 259 195 131 9913 13 3/8 0.85 839 420 280 211 141 10716 16 3/8 0.56 1032 517 344 259 174 13118 18 3/8 0.44 1160 581 387 292 195 14724 24 3/8 0.25 1547 774 515 388 259 195

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

Calculated Coverage Per Unit

document.xls, Permacolor 8 lb bag Appendix B Page 9 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

LATICRETE Permacolor Cement Grout, 8 lb. Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)1 1 1/4 1/16 33.8

Nominal Tile Size Coverage Calculator

Tile Size (inches) Tiles per SF Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

0.0625 0.125 0.188 0.25 0.313 0.375 0.438 0.5

1 1 1/4 144.00 32 16 11 9 7 6 6 52 2 1/4 36.00 63 32 22 16 13 11 10 94 4 1/2 9.00 62 31 21 16 13 11 9 86 6 1/2 4.00 93 47 31 24 19 16 14 128 8 3/8 2.25 165 83 55 42 34 28 24 21

12 12 3/8 1.00 248 124 83 62 50 42 36 3213 13 3/8 0.85 268 134 90 68 54 45 39 34

document.xls, Permacolor 8 lb bag Appendix B Page 9 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

document.xls, 2000 #2 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

LATAPOXY® 2000 Industrial Grout, #2 Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)4 1/4 4 1/4 5/16 1/8 146.9

Nominal Tile Size Coverage Calculator

Tile Size (inches) Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

0.0625 0.125 0.188 0.25 0.313 0.375 0.438 0.5

4 8 1/2 NR NR 74.5 56.3 45.2 38.0 32.7 28.84 8 1 16/85 NR NR 31.4 23.7 19.0 16.0 13.8 12.16 6 1/2 NR NR 83.8 63.4 50.9 42.7 36.8 32.4

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

document.xls, 2000 #4 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

LATAPOXY® 2000 Industrial Grout, #4 Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)4 1/4 4 1/4 5/16 1/8 293.8

Nominal Tile Size Coverage Calculator

Tile Size (inches) Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

4 8 1/2 NR NR 149.1 112.7 90.5 75.9 65.4 57.64 8 1 16/85 NR NR 62.7 47.4 38.1 32.0 27.5 24.26 6 1/2 NR NR 167.7 126.8 101.8 85.4 73.5 64.8

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

document.xls, 1500 10 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

LATICRETE 1500 Series Sanded Cement Grout, 10 lb. Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)4 1/4 4 1/4 5/16 1/8 68.5

Nominal Tile Size Coverage Calculator

Tile Size (inches) Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

1 1 1/4 NR 20.6 14.2 11.0 9.1 7.9 7.1 6.42 2 1/4 NR 39.8 26.9 20.6 16.7 14.2 12.4 11.04 4 1/2 NR 39.2 26.3 19.9 16.0 13.5 11.7 10.36 6 1/2 NR 58.5 39.1 29.6 23.7 19.9 17.1 15.18 8 3/8 NR 103.7 69.3 52.3 41.9 35.1 30.2 26.6

12 12 3/8 NR 155.2 103.5 78.0 62.5 52.3 44.9 39.413 13 3/8 NR 168.1 112.0 84.4 67.6 56.6 48.6 42.616 16 3/8 NR 206.7 137.7 103.7 83.0 69.4 59.6 52.318 18 3/8 NR 232.4 154.8 116.6 93.3 78.0 66.9 58.724 24 3/8 NR 309.6 206.1 155.2 124.1 103.7 88.9 78.0

NR = Use in joints smaller than 1/8" Not Reccomended. Use SpectraLock or 1600 Series

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

document.xls, 1500 25 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

LATICRETE 1500 Series Sanded Cement Grout, 25 lb. Unit

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)4 4 1/2 1/8 101.1

Nominal Tile Size Coverage Calculator

Tile Size (inches) Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

1 1 1/4 NR 51.5 35.4 27.6 22.9 19.8 17.6 16.12 2 1/4 NR 99.6 67.3 51.5 41.8 35.5 30.9 27.64 4 1/2 NR 98.1 65.7 49.8 40.1 33.8 29.1 25.76 6 1/2 NR 146.3 97.8 73.9 59.4 49.8 42.9 37.88 8 3/8 NR 259.4 173.2 130.8 104.9 87.9 75.5 66.4

12 12 3/8 NR 388.2 258.8 195.1 156.2 130.8 112.2 98.613 13 3/8 NR 420.3 280.2 211.2 169.1 141.5 121.4 106.616 16 3/8 NR 516.9 344.3 259.4 207.6 173.6 149.0 130.818 18 3/8 NR 581.2 387.1 291.6 233.3 195.1 167.3 146.824 24 3/8 NR 774.3 515.5 388.2 310.4 259.4 222.4 195.1

NR = Use in joints smaller than 1/8" Not Reccomended. Use SpectraLock or 1600 Series

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.

document.xls, 1600 8 Rev 12/2003

LATICRETE® Grout - Coverage in Square Feet per Unit

LATICRETE 1600 Series Unsanded Cement Grout, 8 lb. Unit

Cu In. grout per unit: 188.9

Exact Tile Size Coverage Calculator

Measure exact dimensions of tile

In YELLOW boxes, enter tile dimensions in inches (fraction or decimal is OK)

In GREEN box, enter desired joint width in inches (fraction or decimal is OK)

Tile Size (inches) Grout Joint SizeCalculated Coverage Per Unit

Width Length Thickness (inches)4 1/4 4 1/4 5/16 1/8 74.5

Nominal Tile Size Coverage Calculator

Tile Size (inches) Grout Joint Size (inches)Width Length Thickness 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2

0.0625 0.125 0.188 0.25 0.313 0.375 0.438 0.5

4 8 31/99 179.8 90.4 NR NR NR NR NR NR

4 1/4 4 1/4 31/99 143.6 72.3 NR NR NR NR NR NR

6 6 31/99 202.2 101.6 NR NR NR NR NR NR

8 10 31/99 299.1 150.1 NR NR NR NR NR NR

12 12 3/8 336.7 168.8 NR NR NR NR NR NR

16 16 3/8 448.6 224.8 NR NR NR NR NR NR

NR = Use in joints larger than 1/8" Not Reccomended. Use SpectraLock or 1500 Series

Notes: Calculated coverage indicated is approximate, based on "nominal" tile size and is provided for purposes of estimation only.

Actual coverage will vary depending on jobsite conditions, actual tile size and installed grout joint size. Use of sufficient thin-set reduces grout requirement.

Add 10% for waste, spillage and clean-up with Ceramic Tile and 10%-15% when grouting unglazed quarry tile.