Lawn Care Products - Yellow Pages · 2017-05-22 · 2 3 First class lawn care from a first class...

2014 Lawn Care Products

2 3

First class lawn care from a first class range.Our range of dedicated lawn care products ensure you can maintain lawns quickly and easily with first class results, using the right product best suited to the task at hand. Regardless of whether you’re a professional landscaper or just need to maintain your lawn at home, Husqvarna have the machines you need to get the job done!

2 3

Walk-behind Lawnmowers 6

Lawn Tractors 8

Zero Turn Mowers 14

Speciality Products & Protective Equipment 24

Automower® 4

Front Riders 20

Product Accessories 26

IMPORTANT INFORMATION

Husqvarna conducts continuous product development and reserves the right to change designs, specifications and equipment levels without prior notification. Always read the instructions carefully before use, as products with moving parts can be dangerous if used incorrectly. All images in the catalogue are for illustrational purposes only. All technical data was current at the time of printing, however these may change as a result of further product development. All engine power values are as rated by the engine manufacturer. Product availability, standard features and equipment may vary from market to market. Optional equipment may be purchased at an additional cost. Please check with your local authorised Husqvarna Specialist Dealer for products recommended and approved in your market.

H HomeownerMedium Duty - Seasonal or occasional use.

L LandownerHeavy Duty - Frequent or demanding use.

C CommercialExtreme Duty - All day, every day use.

Oils & Lubricants 28

Technical Specifications 30

4

Leading the way in robotic mowing for over 20 years. Inspired by how grazing sheep eat just a little, all the time, in a random pattern, the Husqvarna Automower® robotic lawnmower was designed to deliver optimal cutting results, while you do - nothing. Depending on your requirements and the size of your lawn, you’ll find a robotic mower that’s not only dependable but can handle complex gardens to deliver fantastic results with minimal supervision. In fact, 20 years of engineering and refinements make Husqvarna Automower® robotic lawnmowers best in their class.

Not all features mentioned are applicable for all models. For full technical specifications see page 35.

AUTOMOWER® RANGE

AUTOMATIC CHARGING Automower® knows when it needs to be charged and automatically returns to the charging station.

OPTIMAL CUTTING RESULTSUsing razor blades, Automower® achieves the finest cut to give lawns a lush, green look that ordinary knives cannot achieve. The cut grass fertilises the lawn to give a carpet like finish.

ENVIRONMENTAL CAREBattery powered, Automower® produces no harmful emissions. The low energy consumption means it operates at a fraction of the cost of regular lawn mowers.

5

ANTI-THEFT Equipped with an effective anti-theft system and PIN lock, increasing protection.

WEATHER-PROOF Designed to function properly and unattended regardless of the weather conditions.

CUTTNG HEIGHT Adjusting the cutting height is easily done from above by turning one large knob.

SENSORS The automatic lift and tilt sensors ensures the cutting automatically shuts off. If Automower® meets an obstacle it will stop and redirect itself.

REMOTE GPS Allows you to start, stop and even track your Automower® from anywhere in the world.

CONTROL PANEL The settings panel can be personalised to suit different gardens and preferences.

H 305Working area up to 500m2 - Cutting width/height 17cm/2-5cm Li-ion battery, PIN/Alarm, Timer, Automatic charging, 3 cutting blades, Collision sensors, Easy access control panel.

H 320Working area up to 2200m2 - Cutting width/height 24cm/2-6cm Li-ion battery, PIN/Alarm, Timer, Automatic charging, 3 cutting blades, Collision sensors, Spot cutting mode.

H 330XWorking area up to 3200m2 - Cutting width/height 24cm/2-6cm Li-ion battery, GPS navigation, PIN/Alarm, Timer, Automatic charging, 3 cutting blades, Collision sensors, Spot cutting mode.

L 265ACXWorking area up to 6000m2 - Cutting width/height 32cm/2-6cm Li-ion battery, GPS remote module, Ultrasonic sensors, PIN/Alarm, Timer, Automatic charging, 5 cutting blades.

Scan to see our Automower® in action.

6

Lawnmowers to suit any kind of lawn.All our lawnmowers are efficient machines that deliver excellent results and superior ergonomics. The compact design and easily adjusted controls provide superb manoeuvrability with all models delivering efficient, first-class results, time after time. Change the cutting height to suit the lawn and choose the way you want to cut - with multiple cutting systems that let you collect, mulch or eject the clippings. Features like soft grip handles, double ball-bearing wheels, easy to handle collectors and central cutting height adjustment make mowing efficient and comfortable.


BIOCLIP® CUTTING SYSTEMSpecially developed cutting decks with large volume for fast, efficient BioClip® (mulching) cutting results.

CUTTING HEIGHT ADJUSTMENTThe convenient central cutting height adjustment ensures that the deck height is quick and easy to adjust using a single lever.

HIGH PERFORMANCEHigh specification and reliable engines guarantee superior performance as well as a long operating lifespan.

WALK-BEHIND LAWNMOWER RANGE

NEXT GENERATION

NEXT GENERATION

NEXT GENERATION

7

C LC19APBriggs & Stratton DOV/IC - 2.7kW - Cutting width 48cmReadyStart® engine, Alloy cutting deck, Central cutting height adjustment, 2-in-1 cutting system (BioClip® & collection) Double ball bearing wheels with alloy rims, Front bumper, Side skirts.

L LC19ABriggs & Stratton DOV - 2.7kW - Cutting width 48cmReadyStart® engine, Alloy cutting deck, Central cutting height adjustment, 2-in-1 cutting system (BioClip® & collection) Double ball bearing wheels with alloy rims, Folding comfort handle.

H LC19 - Available in Australia onlyBriggs & Stratton DOV - 2.7kW - Cutting width 48cmReadyStart® engine, Steel cutting deck, Central cutting height adjustment, 2-in-1 cutting system (BioClip® & collection) Double ball bearing wheels, Folding comfort handle.

C WB48SE - Only while stocks lastHonda OHC- 2.8kW - Cutting width 48cmSelf-propelled drive system, Front wheel drive, Anti-vibration side-adjustable handle, Central cutting height adjustment, Cast aluminium deck, 2-in-1 cutting system (BioClip® & rear eject).

C WB53SEHonda OHC- 2.8kW - Cutting width 53cmSelf-propelled drive system, Front wheel drive, Anti-vibration side-adjustable handle, Central cutting height adjustment, Cast aluminium deck, 2-in-1 cutting system (BioClip® & rear eject).

C GX560Honda OHC- 2.8kW - Cutting width 50.5cmAir cushion mowing, BioClip® (mulching) cutting system, Cutting deck made from durable ABS plastic, Working angle up to 45°.

C LB548SEHonda OHC- 2.8kW - Cutting width 48cmSelf-propelled drive system, Front wheel drive, Anti-vibration side-adjustable handle, Central cutting height adjustment, Cast aluminium deck, 2-in-1 cutting system (BioClip® & rear eject).

Visit www.husqvarna.com to read more about our products, view comparison charts, videos, accessories and to locate your local authorised specialist Dealer.

NEXT GENERATION

H LC18Briggs & Stratton DOV - 2.7kW - Cutting width 46cmReadyStart® engine, Steel cutting deck, Central cutting height adjustment, 2-in-1 cutting system (BioClip® & collection) Double ball bearing wheels, Folding comfort handle.

8

LESS UNCUT AREASThe U-Cut™ steering technology provides an extremely tight turning radius of only 20cm, effectively reducing the uncut area of grass by up to 50%.

EASY OPERATION The pedal-operated hydrostatic transmission ensures easy speed and direction control. Separate pedals for forward and reverse.

Cup holder

Headlights

Cast front axle

Powder-coated cutting deck Water hose connection

Ergonomic steering wheel

Fender-mounted cutting height adjustment

Hour meter with service minder

BLADE ENGAGEMENTEasy engagement of the cutting blades thanks to a convenient electric switch on the control panel.

EXPLORE NEW DIMENSIONS IN TRACTOR DEVELOPMENT

Not all features mentioned are applicable for all models. More information can be found in the technical specifications table.

9

YEAR-ROUND USEA wide range of attachments makes our tractors versatile and useful all year round. They can be fitted with trailers, blades and more.

BIOCLIP® FROM SEATEasy switch between collecting and BioClip® (mulching) mode by means of a dashboard-operated central actuation device. Available on models CTH2138R and CTH2642TR only.

ROBUST CUTTING DECKSThe reinforced and powder-coated cutting decks give improved durability and corrosion resistance.

Electric blade engagement

Pedal-operated hydrostatic transmission

Step-through

BioClip® from seat

Cruise control

Adjustable sliding seat

Reinforced cutting deckAir Induction™

Pivoting front axle

U-Cut™ steering technology

Scan to see our Lawn Tractors in action.

Battery indicator with charger connection

10

Efficient machines that get the work done.For homeowners who want an efficient and reliable lawn tractor, this range is the ideal fit. Easy to manoeuvre and powered by efficient engines, these side-ejection mowers come feature packed with everything you could possibly need in a ride-on mower. Easy to drive, Air Induction™ cutting decks with spring-assisted lift for simple cutting height adjustments, deck wash port, ergonomic control layout - the list goes on! With a range of optional accessories, all models can be converted to a range of cutting systems, depending on your needs.

Not all features mentioned are applicable for all models. For full technical specifications see page 30 - 31.

AIR INDUCTION™

A powerful air stream lifts the grass before it is cut, for excellent cutting and collection of both grass and leaves.

CUTTING HEIGHT ADJUSTMENTThe easy and accessible fender-mounted cutting height adjustment and spring-assisted cutting deck makes adjustments easier.

STEP THROUGH DESIGNThe step through design of our lawn tractors ensures simple mounting and dismounting.

LAWN TRACTORS - HOMEOWNER RANGE

11

H LTH19530Husqvarna Endurance Series™ - 11.1kW@3300rpm - Deck 30”Foot-pedal hydrostatic, Air Induction™, Spring-assist cutting height adjustment, Pivoting front axle, Adjustable sliding comfort seat, Hour meter, Deck wash port.

H LTH2038RHusqvarna Endurance Series™ - 11.5kW@3300rpm - Deck 38”Foot-pedal hydrostatic, U-Cut™, Air Induction™, Spring-assist cutting height adjustment, Pivoting cast iron front axle, Adjustable sliding comfort seat, Hour meter, Turf saver tyres.

H CTH19530Husqvarna Endurance Series™ - 11.1kW@3300rpm - Deck 30”Foot-pedal hydrostatic, Air Induction™, Spring-assist cutting height adjustment, Electric blade engagement, Integrated 200L collector, Pivoting front axle, Adjustable sliding comfort seat.

H LT19538R - Available in New Zealand onlyHusqvarna Endurance Series™ - 11.1kW@3300rpm - Deck 38”Manual transmission, U-Cut™, Air Induction™, Spring-assist cutting height adjustment, Pivoting cast iron front axle, Adjustable sliding comfort seat, Hour meter, Turf saver tyres.

H LTH2142DRHusqvarna Endurance Series™ - 12.2kW@3300rpm - Deck 42”Foot-pedal hydrostatic, U-Cut™,Automatic differential lock, Air Induction™, Spring-assist cutting height adjustment, Electric blade engagement, Pivoting cast iron front axle, 2 anti-scalp wheels.

H CTH2138RHusqvarna Endurance Series™ - 12.2kW@3300rpm - Deck 38”Foot-pedal hydrostatic, U-Cut™, Air Induction™, BioClip®/mulch from seat, Spring-assist cutting height adjustment, Electric blade engagement, Integrated 220L collector, 2 andti-scalp wheels.

CUTTING SYSTEMS FOR ALL NEEDS.If you prefer tidy cutting results and want to collect grass clippings, leaves and other debris, choose a CTH Lawn Tractor, or buy a side ejecting Lawn Tractor and add an optional collector accessory.

To fertilise your lawn while mowing, choose the BioClip® cutting mode, which requires somewhat more frequent mowing. On CTH Lawn Tractors, BioClip® is included (excludes model CTH19530). For side ejecting models BioClip® can be added as an optional accessory.

For seldom-cut lawns, a Lawn Tractor with side ejection is the most suitable choice. You can transform CTH Lawn Tractors to ejecting machines, by simply adding the optional deflector accessory for rear ejection (excludes model CTH19530).

12

Sometimes size really does matter.This range consists of our most advanced garden tractors. Equipped with powerful V-Twin engines and the U-Cut™ steering technology – for less uncut areas and more efficient mowing. The easily accessible cutting height adjustment and spring assisted cutting deck ensures excellent ergonomics and easy adjustments. The YTH/GTH models offer side ejection cutting making them ideal for bigger lawns, while the CTH model has integrated collection for those landowners who want to achieve tidy cutting results.


FABRICATED CUTTING DECKSFeatured on selected models, these decks provide increased strength to handle heavy cutting applications.

DIFFERENTIAL LOCKAvailable in both automatic and manual versions, the differential lock improves traction and performance in a wider range of mowing applications.

V-TWIN ENGINESThese workhorses feature powerful, V-Twin engines with full pressure lubrication, oil pump and oil filter.

LAWN TRACTORS - LANDOWNER RANGE

13

L YTH2246TDRHusqvarna Endurance Series™ V-Twin - 12.8kW@3300rpm - Deck 46”Foot-pedal hydrostatic, U-Cut™, Automatic differential lock, Air Induction™, Electric blade engagement, Cruise control, Adjustable sliding premium seat, 2 anti-scalp wheels.

L YTH2242TDRFHusqvarna Endurance Series™ V-Twin - 12.8kW@3300rpm - Deck 42”Foot-pedal hydrostatic, U-Cut™, Automatic differential lock, Fabricated deck, Electric blade engagement, Cruise control, Adjustable sliding premium seat, 2 anti-scalp wheels.

L CTH2642TRHusqvarna Endurance Series™ V-Twin - 15.3kW@3300rpm - Deck 42”Foot-pedal hydrostatic, U-Cut™, Air Induction™, BioClip®/mulch from seat, Spring-assist cutting height adjustment, Electric blade engagement, Integrated 320L collector, 4 anti-scalp wheels.

L YTH2648TDRFHusqvarna Endurance Series™ V-Twin - 15.3kW@3300rpm - Deck 48”Foot-pedal hydrostatic, U-Cut™, Automatic differential lock, Fabricated deck, Electric blade engagement, Cruise control, Adjustable sliding premium seat, arm rests, 4 anti-scalp wheels.

L GTH3052TDFHusqvarna Endurance Series™ V-Twin - 17.2kW@3300rpm - Deck 52”Foot-pedal hydrostatic, Manual differential lock, Fabricated deck, Electric blade engagement, Cruise control, Adjustable sliding premium seat, arm rests, 4 anti-scalp wheels.


U-CUT™ STEERING ELECTRIC BLADE ENGAGEMENT BIOCLIP® FROM SEAT

14

EFFICIENT MOWINGThe efficient cutting decks combined with outstanding manoeuvrability means these machines deliver unequalled, fast and easy mowing.

NO UNCUT CIRCLESThe zero turn steering system offers individual, hydraulic wheel-drive, which provides precise manoeuvring and allows the mower to rotate around on its own axle, leaving no uncut circles.

EASY-ACCESS SERVICEOil and filter maintenance, hydraulic drive system component/adjustments, electrical system and battery are all within easy reach so you can quickly get back to being productive.

EXPLORE NEW DIMENSIONS IN ZERO TURN MOWER DEVELOPMENT

Collector available as an accessory

Hour meter with service minder

Electric blade engagementZero-turn steering system


15

LOW CENTRE OF GRAVITYTo ensure operator safety and increased stability, our zero turn mowers feature a wide stance in combination with a low centre of gravity resulting in a smooth ride.

COMFORTABLE OPERATIONErgonomic driver’s position with an excellent overview of the working area and easy-access control panel, putting you in total control.

RUGGED FRAME & CASTORSBuilt to withstand the toughest applications, the heavy-duty welded steel uni-body frame and rugged front castor wheels provide increased strength, durability and reduced chassis flexing.

Scan to see our Zero Turn Mowers in action.

Armrests

Commercial drive systemHeavy-duty fabricated deck

Hands-free deck lift

Rugged frame

Heavy-duty front castors

16

Mowers without any cutting limits.When it comes to manoeuvrability, efficiency and convenience, our compact RZ series mowers really hit the mark. Delivering true zero turn performance, with powerful engines and high capacity cutting decks, providing superior results. The rugged frame, heavy-duty front castors and unbeatable deck strength ensure these mowers can be depended on for years to come. User-friendly features include easy deck lift systems, water hose connection for easy cleaning of the deck, a convenient control layout, foam padded steering levers and comfortable seats.


ERGONOMIC STEERING LEVERSDual, adjustable levers with foam-padded hand grips are ergonomically designed and angled inwards to create the correct alignment of wrists and elbows, reducing operator fatigue

CONTROL PANELThe control panel is ergonomically designed and within easy reach of the operators seat.

V-TWIN ENGINESSelected models feature powerful, V-Twin engines with full pressure lubrication, oil pump and oil filter.

ZERO TURN MOWERS - HOMEOWNER RANGE

17

H RZ4221Husqvarna Endurance Series™ - 12.3kW@3350rpm - Deck 42”Productivity* 2.2 acres/hr, Ergonomic adjustable steering levers, Air Induction™ deck, Maintenance free transmission, Removable foot pan, Electric blade engagement, Convenient control panel.

H RZ4222TFHusqvarna Endurance Series™ V-Twin - 12.9kW@3350rpm - Deck 42”Productivity* 2.2 acres/hr, Ergonomic adjustable steering levers, Fabricated deck, Maintenance free transmission, Removable foot pan, Electric blade engagement, Digital hour meter.

H RZ5424TKawasaki FR Series V-Twin - 17.9kW@3600rpm - Deck 54”Productivity* 2.8 acres/hr, Ergonomic adjustable steering levers, Air Induction™ deck, Maintenance free transmission, Removable foot pan, Electric blade engagement, Digital hour meter.

H RZ4622THusqvarna Endurance Series™ V-Twin - 12.9kW@3350rpm - Deck 46”Productivity* 2.4 acres/hr, Ergonomic adjustable steering levers, Air Induction™ deck, Maintenance free transmission, Removable foot pan, Electric blade engagement, Digital hour meter.

H RZ4824TF - Available in Australia only.Husqvarna Endurance Series™ V-Twin - 14.8kW@3350rpm - Deck 48”Productivity* 2.5 acres/hr, Ergonomic adjustable steering levers, Fabricated deck, Maintenance free transmission, Removable foot pan, Electric blade engagement, Digital hour meter.


*Productivity will vary dependant on attainable ground speed, mowing conditions and height of cut. Productivity (80% efficiency) is calculated by width of cut X ground speed/120 = Acres per hour.

REMOVABLE FOOT-PAN REAR BUMPER MAINTENANCE FREE TRANSMISSON

18

Advanced mowers with no compromises.Designed for extremely large property owners and commercial mowing operators, these mowers take performance, productivity and comfort to a whole new level. Featuring a rugged, commercial construction, welded steel tube frame, heavy-duty castors with tapered roller bearings and sturdy deck lift to withstand the toughest applications. The heavy-duty cutting decks, with high performance blades and optimised deck design, deliver exceptional cut quality, while careful consideration of components and design not only provide extended durability but unprecedented ease of service.


*Productivity will vary dependant on attainable ground speed, mowing conditions and height of cut. (80% efficiency) is calculated by width of cut X ground speed/120 = Acres per hour.

FABRICATED CUTTING DECKSHigh performance, steel fabricated cutting decks provide increased strength to handle heavy cutting applications.

HANDS-FREE DECK LIFTThe convenient hands-free deck lift utilises heavy-duty components supported by maintenance free composite bushings, for smooth function and increased durability (excludes model EZ4824TF).

ROLL OVER PROTECTIONPractical, foldable Roll Over Protection System (ROPS) provides added protection for the operator and can be lowered to 90o in areas of low-hanging branches or for transportation.

ZERO TURN MOWERS - LANDOWNER & COMMERCIAL RANGE

1918

L EZ4824TFHusqvarna Endurance Series™ V-Twin - 14.8kW@3500rpm - Deck 48”Productivity* 2.5 acres/hr, Ergonomic adjustable steering levers, Fabricated deck, Hand-operated deck lift, Durable drive system, Removable foot pan, Digital hour meter.

L MZT61Husqvarna Endurance Series™ Commercial - 16.5kW@3600rpm - Deck 61”Productivity* 4.9 acres/hr, Ergonomic adjustable steering levers, Fabricated deck, Hands-free deck lift, Commercial drive system, Removable foot pan, Digital hour meter, ROPS.

C PZ29Kawasaki FX Series V-Twin - 19.0kW@3600rpm - Deck options 54-61”Productivity* 4.8-5.3 acres/hr, Hydro drive system, Hands-free deck lift, Heavy-duty canister air filter, Over-sized fuel tank, Easy-access service points, Vibration-isolated platform, Flat-free castors, ROPS.

L MZ5226Husqvarna Endurance Series™ V-Twin - 15.4kW@3500rpm - Deck 52”Productivity* 3.5 acres/hr, Ergonomic adjustable steering levers, Fabricated deck, Hands-free deck lift, Durable drive system, Removable foot pan, Digital hour meter, ROPS available as accessory.

C PZT54Kawasaki FX Series V-Twin - 18.3kW@3600rpm - Deck 54”Productivity* 4.2 acres/hr, Commercial duty chassis, Fabricated deck, Hands-free deck lift, Heavy-duty canister air filter, Over-sized fuel tank, Easy-access service points, Vibration-isolated platform, ROPS.

C PZ34Kawasaki FX Series V-Twin - 23.1kW@3600rpm - Deck options 60-72”Productivity* 4.8-5.3 acres/hr, Hydro drive system, Hands-free deck lift, Heavy-duty canister air filter, Over-sized fuel tank, Easy-access service points, Vibration-isolated platform, Flat-free castors, ROPS.

EASY-ACCESS SERVICE POINTS EASY-ACCESS CONTROLS COMBI DECK OPTION - PZ29/PZ34

20

EXPLORE NEW DIMENSIONS IN RIDER DEVELOPMENT

MOWING ACCESSIBILITYThe front-mounted cutting deck gives excellent overview of the working area, allowing you to trim edges and reach into corners and under bushes with ease.

VERSATILE CUTTING SYSTEMSThe Combi cutting deck offers the versatility of two different cutting systems. You can choose between BioClip® for lawn fertilisation and rear ejection for efficient mowing on areas with long thick grass.

SUPERIOR MANOEUVRABILITYThe unique articulated steering system allows the rear wheels to swing in underneath the machine. The result is superior manoeuvrabilty and intuitive operation, which means that you can easily handle driving around obstacles like trees and bushes.

Four equally-sized wheels

Pedal-operated hydrostatic transmission

12 V socket outlet

Easy-access controls

Robust chassis

All-Wheel-Drive

Articulated steering

Pivoting rear axle

Easy-access service points

Engine behind driver

Hour meter

Comfort high-back seat


21

EASY-ACCESS CONTROLSAll controls are ergonomically located and easy to reach from the driver’s seat. The cutting blades are engaged automatically when the cutting deck is lowered.

DRIVER’S POSITIONWith a Rider you get safety, stability and traction on both flat grounds and hillsides. The Rider’s low gravity centre contributes to extra good traction as well as a comfortable “sit-in” feeling for the user.

SERVICE POSITIONA clean cutting deck always gives the best cutting results. The cutting deck is easily tilted up into service position, which makes it easy to clean and service.

Attachment frame

External fuel cap with big diameter

Storage compartment

Transparent fuel tank

Power steering

Headlights

Automatic blade engagement

Bottle holder

Front-mounted cutting deck

Combi cutting deck

Scan to see our Riders in action

22

Even the biggest of lawns will seem small.Lawn mowing can be tough and time consuming, especially if the lawn is large or if you have many obstacles in the way. With the help of a Husqvarna Front Rider with its articulated steering and front-mounted cutting deck, the combination of control, comfort and efficiency will make your ride extremely enjoyable. With features like All Wheel Drive, it’s hard to find places where these machines aren’t able to reach.


REAR-WHEEL DRIVEThe efficient rear-wheel drive system ensures excellent traction when mowing on undulating terrain.

ENGINE BEHIND DRIVERThanks to the rear-mounted engine, you get better overview of the mowing and less noise and emissions in the driver’s area.

ALL WHEEL DRIVEAutomatically adjusts the traction on all wheels depending on the situation and ground condition.

FRONT RIDER RANGE

23

H R120CHusqvarna Endurance Series™ - 10.2kW@2900rpm - Deck 95cmArticulated steering, Foot-pedal hydrostatic, Rear wheel drive, Combi deck/BioClip® cutting system, Single-lever cutting height adjustment, Easy-access service points, External fuel cap.

L R322TAWDHusqvarna Endurance Series™ V-Twin - 12.6kW@3000rpm - Deck 112cmAll Wheel Drive, Articulated steering, Foot-pedal hydrostatic, Combi deck/BioClip® cutting system, Single-lever cutting height adjustment, Easy-access service points, External fuel cap.

C P524Kawasaki FX Series V-Twin - 13.9kW@3000rpm - Deck options 112-122cmAll Wheel Drive, Articulated steering, Hydraulic power steering, Commercial graded transmission, Durable ladder frame, Combi Turf cutting deck options, Quick coupling, Easy-access service points.

L R220THusqvarna Endurance Series™ V-Twin - 12.6kW@3000rpm - Deck 103cmArticulated steering, Foot-pedal hydrostatic, Rear wheel drive, Combi deck/BioClip® cutting system, Single-lever cutting height adjustment, Easy-access service points, External fuel cap.

C R422TSAWDHusqvarna Endurance Series™ V-Twin - 12.6kW@3000rpm - Deck 112/122cmAll Wheel Drive, Articulated power steering, Hydraulic equipment lift, Pivoting support wheels, Combi Turf cutting deck options, Quick coupling, Easy-access service points.

C P525DKubota Diesel - 18.7kW@3000rpm - Deck options 132-155cmAll Wheel Drive, Articulated steering, Hydraulic power steering, Commercial graded transmission, Durable ladder frame, Shaft PTO, Low profile cutting decks, Flat-free support wheels, Quick coupling.

FOUR LARGE WHEELS AUTOMATIC BLADE ENGAGEMENT

PEDAL-OPERATED HYDROSTATIC TRANSMISSION

2524

Speciality products that make light work of your day.Our commercial speciality maintenance products have a range of unique features designed to help you work more efficiently, with less effort. Driven by powerful Honda engines, with solutions that significantly lower noise as well as emissions, they combine smart functions and heavy-duty design ensuring easy service and years of reliable use.


AR19: FREE-WHEELING OUTER TINE SYSTEM

DT22H: ROBUST DESIGN

SG13: ADJUSTABLE HANDLE

SPECIALITY PRODUCTS & PERSONAL PROTECTIVE EQUIPMENT

SC18: ALL WHEEL DRIVE

25

FM RADIO EARMUFF Designed to centralise the pressure on the headband, reducing pressure on the ears. Audio input 3.5mm (AUX). Noise reduction - SNR - 27dB(A). Meets requirements of EN352-3:2002, EN352-6:2002 and EN352-8:2008.

578 27 49-01 FM Radio Earmuff

FUNCTIONAL FOREST HELMET Made in Australia and supplied with the hearing protection, sun peak, neck guard and now includes the new UltraVision visor - which offers a 20 % light reduction giving a clearer view. Certified to AS/NZS 1801:1997,Type 2.

579 24 40-01 Functional Forest Helmet

PREMIUM EARMUFF & VISORFitted with a cover between the visor and headband to prevent debris from entering above. Protectors made from impact resistant ABS plastic. Meets requirements of EN 352-1, EN166 and EN 1731.

505 66 53-48 with Perspex Visor

505 66 53-58 with Mesh Visor

GARDEN EARMUFF & VISORComplete with visor holder and perspex or mesh visor. Protectors made from impact resistant ABS plastic. Meets requirements of EN 352-1 and EN 166.

505 66 53-60 with Perspex Visor

505 66 53-61 with Mesh Visor

PREMIUM EARMUFFPadded headband design allows for 20% adjustment of pressure for a comfortable fit. Protectors made from impact resistant ABS plastic. Meets requirements of EN 352-1.

505 66 53-04 Premium Earmuff, single

579 03 56-01 Premium Earmuff, helmet

GARDEN EARMUFFExtra wide headband for a secure, comfortable fit with less pressure on the head. Protectors made from impact resistant ABS plastic. Meets requirements of EN 352-1 and EN 166.

510 19 95-01 Garden Earmuff, single

505 69 90-12 Garden Earmuff, 10 pack

PROTECTIVE EYEWEARProtective eyewear with scratch resistant lenses. Meets requirements of EN 166, ANSI Z87+.544 96 37-01 Clear X Glasses

544 96 37-02 Yellow X Tinted Glasses

544 96 37-03 Grey X Tinted Sunglasses

544 96 39-01 Goggles, Anti-fog

PERSONAL PROTECTIVE EQUIPMENT

CLASSIC LIGHT GLOVESA slim fit and comfortable glove made with a goat leather palm with jersey fabric on the back.579 38 00-06 Classic Light Gloves, Size 6

579 38 00-08 Classic Light Gloves, Size 8



C SG13 STUMP GRINDERHonda GX Series - 8.7kW @ 3600rpm - Working depth 30cmCarbide-tooth grinding disk, Compact design, Adjustable handle.

C SC18 TURF CUTTERHonda GX Series - 3.2kW @ 3000rpm - Working depth/width 6.5/46cmAWD design, 4 forward and 1 reverse gear, Vibration dampened handle.

C AR19 AERATORHonda GX Series - 2.6kW @ 3600rpm - Working depth/width 7.6/48cmPatented free-wheeling outer tine system, Foldable handle.

C DT22H DETHATCHERHonda GX Series - 3.6kW @ 3600rpm - Working depth/width 2.5/56cmSold as platform and motor unit only, Fit up options sold separately.

26 27

ROAD KITComplete road kit designed for safe transport on public roads to and from work sites. Kit includes control box, rotating beacon light, position and touring lights (front and rear) and number plate light kit.

585 31 87-01 Road Kit - P525D

HYDRAULIC KITKit necessary for adaption of front-mounted attachments with hydraulic function.

966 75 45-01 Hydraulic Kit - P525D

BRUSHRotating brush attachment for model P525D. Shaft driven with bevel gear and chain drive. Two rear solid support wheels for ground following. Requires hydraulic kit.

966 75 44-01 Brush - P525D

FLAIL MOWERRobust, reliable flail mower for rough areas with over-grown grass and low brushwood. Hard-wearing mitre gear for maximum product life. Suits models R422TSAWD, P524.

966 79 65-01 Flail Mower - Cutting width 100cm.

BRUSH Special order via indent only.Rotating brush attachment for professional Riders. Adjustable support wheels. Suits models R422TSAWD, P524.

966 79 63-01 Brush - Working width 114-120cm.

UTILITY BUCKETPractical utility bucket in welded high-tensile steel. Hydraulic adjustment of angling and emptying. Requires hydraulic kit and counter weight.

965 99 74-01 Utility Bucket - P525D

COUNTER WEIGHTRear counterweight, must be used when operating front-mounted attachments. Total weight 62kg. Suits model P525D.

966 75 49-01 Counter weight

FLAIL MOWERProductive and robust flail mower for rough areas with overgrown grass and brushwood. Shaft driven with bevelgear. Requires counter weight. Suits model P525D.

967 02 43-01 Flail mower - P525D

SWEEPER/COLLECTORFor Riders. A spacious, handy collector that is easily emptied from the driver’s seat. Adjustable height setting. Working width 42”/107cm.

581 53 81-01 Sweeper/Collector

AERATOR Special order via indent only. Efficient tow-behind aerator. Productivity 2.9 acres/hr. Weight units sold separately. Suits models R422TSAWD.

540 00 00-73 Aerator - 36” Width968 99 92-36 Aerator - 48” Width

SPREADERTow-behind spreader with a working width of 120-240cm and a capacity of 30kg.

954 12 00-46 Spreader

PRODUCT ACCESSORIES


26 27

SUN SHADEDurable and effective sun shade designed to reduce your exposure to the sun. Available for all Tractor models. Adapter kits available for earlier models.

531 30 83-22 Sun Shade While stocks last

SEAT COVERWater resistant fabric, cushioned for extra comfort, with rear storage pockets for tools and gear. Protects the seat against weather and UV damage. Suits all homeowner/landowner ride-on mowers.

531 30 82-28 Seat cover

COVER Full size covers made in water resistant nylon.

505 63 08-70 Rider Cover (S) - Suits 100 series

504 98 13-82 Rider Cover (L) - Suits 400 series

505 63 08-80 Tractor Cover (S) - Suits LT

505 63 08-82 Tractor Cover (L) - Suits YT/GT/CT

BIOCLIP® / MULCHING KITConverts standard cutting deck to BioClip® (mulch-ing). Suits selected lawn tractors and zero turns.

Ask instore for fit up options and ordering details.

TRAILERRugged, steel, dump trailer with fold down tailgate. Capacity: 227kg. Size: 177.8 x 76.2 x 73.6 cm

967 02 71-01 Trailer

TRACTOR SCOOPConvenient scoop recommended for transporting small / lightweight items, such as bark or leaves.

576 21 73-01 Tractor Scoop - YT/GT models

TRACTOR BLADEEfficient 48” blade recommended for clearing gravel and debris from paths.

576 21 74-01 Tractor Blade - GT models only.

DEFLECTORConverts CTH2138R, CTH2642TRE and CTH2642TR to rear ejection with a deflector.

960 71 00-40 Deflector - CTH2138R/CTH2642TRE

960 71 00-42 Deflector - CTH2138R/CTH2642TR

COLLECTORSA range of spacious collectors available, with two or three bin compartments. Capacity - 210 L or 315 L.

Ask instore for fit up options and ordering details.

AUTOMOWER® HOUSEProtects charging station and Automower® from exposure to sun and rain.

504 82 14-01 Automower® house

SIGNAL BOOSTERIncreases the signal strength to a sufficient level in long loop wire installations.

522 42 58-01 Signal booster - Automower®

SOFT CARRY BAGA special carry bag, making it easy to transport the Automower® between lawns.

505 69 99-91 Soft carry bag - Automower®

2928

The smart combi can.This unique combi can holds 6 litres of petrol and 2.5 litres of oil. The fuel container has an efficient overfill protection. Approved in accordance with UN recommendations.

505 69 80-00 Combi Can

The combi can has a smart design. The fuel and oil containers can be separated from each other, and between them there’s space for files and other tools.

The flow stops automatically when the machine’s tank is full, which means you can lift the combi can without spilling fuel.

With 325 years of engineering excellence behind us, Husqvarna is the brand you can trust.The strength of the Husqvarna brand has been forged by a history that goes all the way back to 1689, when Husqvarna first laid the foundation for the engineering expertise that has led us to develop world class outdoor powerequipment today. Husqvarna aims to provide you total satisfaction with product performance, reliability and safety.

With this in mind, Husqvarna offers a 5 year Domestic Warranty* period when you buy genuine Husqvarna oil with your new Husqvarna product.

* Conditions apply, ask instore for full details or visit www.husqvarna.com

2928

Regular 2-stroke oils leave deposits on the pistons causing damage at high temperatures.

Two-stroke oil comparison.A laboratory test made with a Husqvarna 346XP® chainsaw under very heavy load, clearly shows the difference between reference oil and our 2-stroke oils. Cylinder and piston comparison ran under the same circumstances but with different engine oil. The cylinder ran on the same engine block. The result was that our oils give better protection against lean and carbon related piston seizures.

Husqvarna oils have been proven to leave less deposits on the pistons. Reducing damage at high temperatures.

The Husqvarna crown on the cap ensures that the product is authentic and that it will deliver the protection and lubrication promised by Husqvarna.

The oils are developed, and continually tested, to keep the right temperature and to ensure that your engine gets the lubrication needed.

Oils that give good performance.

AIR FILTER OILSEffectively traps particles in the filter, keeping the engine cleaner and reducing wear.

555 50 00-81 HD Foam filter oil, 250ml

502 71 89-01 Air filter spray - Motorex 655, Aue - 750ml / NZ - 400ml (ctn 12)

504 70 53-01 Air filter spray - Motorex 655, Aue - 750ml / NZ - 400ml (ctn 4)

531 00 92-48 Biodegradable foam filter oil, 1 Litre

OILS AND LUBRICANTS

HP TWO-STROKE OILDesigned to meet all the tough challenges a two-stroke engine oil can encounter. It lowers high temperature caused by low-quality fuel and reduces the coating and wear and tear on the bearings and cylinder walls. The oil is a mix of mineral and synthetic oils, and the additives are of the highest quality. HP is designed for use with all Husqvarna two-stroke products. Complies with JASO FB / ISO EGB.544 01 58-09 1 Litre dosage bottle

544 01 58-10 4 Litres

LS+ TWO-STROKE OILVery low smoke emissions - clean engine, clean environment! The Husqvarna LS+ two-stroke oils feature a unique additive that lowers the smoke levels and at the same time increases the lubricating ability, protects against seizure and lowers the engine temperature. Complies with JASO FB / ISO EGD.

578 18 03-02 0.1 Litre

578 03 70-02 1 Litre dosage bottle

578 03 71-02 4 Litres

578 18 00-02 10 Litres

HUSQVARNA 4-STROKE OIL, 10W/30Husqvarna SAE10W/30 4-Stroke Engine Oil is a premium, multi-grade engine oil and has been specially compounded and approved for use with Husqvarna Endurance Series engines, and other 4-Stroke, air-cooled engines. Specification: SAE 10W30 - API SM (Petrol), API CF-4 (Diesel).

576 90 19-01 1 Litre (ctn 12)

576 90 19-02 4 Litre (ctn 4)

576 90 19-03 20 Litre

GREASE AND SHARPENING PASTE A range of premium quality greases for bevel gear and driveshaft lubrication. Sharpening paste aids in sharpening mower and edger blades. 503 62 12-01 Grease Sachet 40g

503 97 64-01 Eco.Bevel Gear Grease 100g

295 64 13-01 Sharpening Paste 100g (ctn 20)

30

LAWN TRACTORS LTH19530 LT19538RAvailable in New Zealand only

LTH2038R LTH2142DR YTH2246TDR YTH2242TDRF YTH2648TDRF GTH3052TDF CTH19530 CTH2138R CTH2642TRE

Article Number 960410169 960410282 960410283 960410236 960410272 960410237 960410264 960410285 960510119 - AU960510055 - NZ

960510120 960510121

Engine Husqvarna Endurance Series™

Husqvarna Endurance Series™










Engine type Single Single Single Single V-Twin V-Twin V-Twin V-Twin Single Single V-Twin

Net power @ preset rpm 11.1kW @ 3300rpm 11.1kW @ 3300rpm 11.5kW @ 3300rpm 12.2kW @ 3300rpm 12.8kW @ 3300rpm 12.8kW @ 3300rpm 15.3kW @ 3300rpm 17.2kW @ 3300rpm 11.1kW @ 3300rpm 12.2kW @ 3300rpm 15.3kW @ 3300rpm

Alternator, A 5/3 5/3 5/3 9 16 16 16 16 5/3 9 16

Battery capacity, Ah 20 28 28 28 28 28 28 28 28 28 28

Fuel tank capacity, litres 5.7 5.7 5.7 5.7 15.1 15.1 15.1 15.1 5.7 5.7 9.5

Transmission manufacturer Hydro-Gear Peerless Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Hydro-Gear Tuff Torq Tuff Torq

Transmission type Hydrostatic Manual Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic

Foot-pedal hydro • – • • • • • • • • •Speed forward, min-max, km/h 0-8.4 0-8.9 0-8.4 0-8.4 0-8.4 0-8.4 0-8.4 0–12.6 0-8.4 0-8.4 0-8.4

Speed reverse, km/h 0-4.7 0-2.7 0-4.7 0-4.7 0-4.7 0-4.7 0-4.7 0–4.7 0-4.7 0-4.7 0-4.7

Tyre size, front / rear, inches 13x5 / 16x6.5 15x6 / 18x9.5 15x6 / 20x10 15x6 / 20x10 15x6 / 20x10 15x6 / 20x10 15x6 / 20x10 16.5x6 / 23x10.5 13x5-6 / 16x6.5-8 15x6-6 / 18x9.5-8 15x6-6 / 18x9.5-8

Turning radius, inches / cm 16 / 41 8 / 20 8 / 20 8 / 20 8 / 20 8/ 20 8 / 20 18 / 46 16 / 41 8 / 20.3 8 / 20.3

Wheelbase, cm 119 121.9 121.9 121.9 124 124 124 124 119 119 119

Cutting width, inches / cm 30 / 77 38 / 97 38 / 97 42 / 107 46 / 117 42 / 107 48 / 122 52 / 132 30 / 77 38 / 97 42 / 107

Cutting height (min-max), mm 38 - 102 38 - 102 25–89 38–102 38 - 102 38 - 102 38 - 102 38 - 102 38 - 102 26–102 38 - 102

Number of cutting blades 1 2 2 2 2 3 3 3 1 2 2

Collector volume, litres – – – – – – – – 200 220 320

Fast transmission – – – – – • • • – – –

Automatic differential lock – – – • • • • • – – –

U-Cut™ steering system – • • • • • • – – • •Full oil pressure-lubricated engine • • • • • • • • • • •Oil pump / Oil filter • /• • /• • /• • /• • /• • /• • /• • /• • /• • /• • /•Adjustable, sliding seat • • • • • • • • • • •Premium seat, with arm rests / no arm rests – – – – – / • – / • • / – • / – – – –

Comfort seat • • • • – – – – • • •Step-through design • • • • • • • • • • •Thick, padded steering wheel – – • • • • • • – – –

Cruise control – – – – • • • • – – •12 volt outlet – – – – • • • • – – –

Large, turf-saver rear tyres – • • • • • • • – – –

Pivoting front axle / cast iron front axle • / – • /• • /• • /• • /• • /• • /• • /• • / – • /• • /•Extra large fuel tank, with reserve – – – – • • • • – – –

Fuel level window – – – – • • • • – – –

Cup holder • • • • • • • • • • •Hour meter with service minder • • • • • • • • • • •Headlights • • • • • • • • • • •Bumper / Brushguard (•) / – • / – • / – • / – – / • – / • – / • – / • (•) / – • / – – / •Fabricated cutting deck – – – – – • • • – – –

Air Induction™ cutting deck • • • • • – – – • • •Electric cutting blade engagement – – – • • • • • • • •Spring-assist cutting height adjustment • • • • • • • • • • •Deck wash port • • • • • • • • • • •Anti-scalp wheels – – – 2 2 2 4 4 – 2 4

Anti-scalp front roller – – – – • • • • – – –

Collector / Deflector – / • – / • (•) / • (•) / • (•) / • (•) / • (•) / • (•) / • • / – • / (•) • / (•)

Mulching kit / Mulching plug (CTH) (•) / – (•) / – (•) / – (•) / – (•) / – (•) / – (•) / – (•) / – – / (•) – –

Mulch from seat – – – – – – – – – • •

TECHNICAL SPECIFICATIONS - LAWN TRACTORS

TABLE KEY: • = Standard (•) = Optional – = Not applicable

31

LAWN TRACTORS LTH19530 LT19538RAvailable in New Zealand only

LTH2038R LTH2142DR YTH2246TDR YTH2242TDRF YTH2648TDRF GTH3052TDF CTH19530 CTH2138R CTH2642TRE

Article Number 960410169 960410282 960410283 960410236 960410272 960410237 960410264 960410285 960510119 - AU960510055 - NZ

960510120 960510121












Engine type Single Single Single Single V-Twin V-Twin V-Twin V-Twin Single Single V-Twin


Alternator, A 5/3 5/3 5/3 9 16 16 16 16 5/3 9 16

Battery capacity, Ah 20 28 28 28 28 28 28 28 28 28 28

Fuel tank capacity, litres 5.7 5.7 5.7 5.7 15.1 15.1 15.1 15.1 5.7 5.7 9.5

Transmission manufacturer Hydro-Gear Peerless Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Tuff Torq Hydro-Gear Tuff Torq Tuff Torq

Transmission type Hydrostatic Manual Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic

Foot-pedal hydro • – • • • • • • • • •Speed forward, min-max, km/h 0-8.4 0-8.9 0-8.4 0-8.4 0-8.4 0-8.4 0-8.4 0–12.6 0-8.4 0-8.4 0-8.4

Speed reverse, km/h 0-4.7 0-2.7 0-4.7 0-4.7 0-4.7 0-4.7 0-4.7 0–4.7 0-4.7 0-4.7 0-4.7

Tyre size, front / rear, inches 13x5 / 16x6.5 15x6 / 18x9.5 15x6 / 20x10 15x6 / 20x10 15x6 / 20x10 15x6 / 20x10 15x6 / 20x10 16.5x6 / 23x10.5 13x5-6 / 16x6.5-8 15x6-6 / 18x9.5-8 15x6-6 / 18x9.5-8

Turning radius, inches / cm 16 / 41 8 / 20 8 / 20 8 / 20 8 / 20 8/ 20 8 / 20 18 / 46 16 / 41 8 / 20.3 8 / 20.3

Wheelbase, cm 119 121.9 121.9 121.9 124 124 124 124 119 119 119

Cutting width, inches / cm 30 / 77 38 / 97 38 / 97 42 / 107 46 / 117 42 / 107 48 / 122 52 / 132 30 / 77 38 / 97 42 / 107

Cutting height (min-max), mm 38 - 102 38 - 102 25–89 38–102 38 - 102 38 - 102 38 - 102 38 - 102 38 - 102 26–102 38 - 102


Collector volume, litres – – – – – – – – 200 220 320

Fast transmission – – – – – • • • – – –

Automatic differential lock – – – • • • • • – – –

U-Cut™ steering system – • • • • • • – – • •Full oil pressure-lubricated engine • • • • • • • • • • •Oil pump / Oil filter • /• • /• • /• • /• • /• • /• • /• • /• • /• • /• • /•Adjustable, sliding seat • • • • • • • • • • •Premium seat, with arm rests / no arm rests – – – – – / • – / • • / – • / – – – –

Comfort seat • • • • – – – – • • •Step-through design • • • • • • • • • • •Thick, padded steering wheel – – • • • • • • – – –

Cruise control – – – – • • • • – – •12 volt outlet – – – – • • • • – – –

Large, turf-saver rear tyres – • • • • • • • – – –

Pivoting front axle / cast iron front axle • / – • /• • /• • /• • /• • /• • /• • /• • / – • /• • /•Extra large fuel tank, with reserve – – – – • • • • – – –

Fuel level window – – – – • • • • – – –

Cup holder • • • • • • • • • • •Hour meter with service minder • • • • • • • • • • •Headlights • • • • • • • • • • •Bumper / Brushguard (•) / – • / – • / – • / – – / • – / • – / • – / • (•) / – • / – – / •Fabricated cutting deck – – – – – • • • – – –

Air Induction™ cutting deck • • • • • – – – • • •Electric cutting blade engagement – – – • • • • • • • •Spring-assist cutting height adjustment • • • • • • • • • • •Deck wash port • • • • • • • • • • •Anti-scalp wheels – – – 2 2 2 4 4 – 2 4

Anti-scalp front roller – – – – • • • • – – –

Collector / Deflector – / • – / • (•) / • (•) / • (•) / • (•) / • (•) / • (•) / • • / – • / (•) • / (•)

Mulching kit / Mulching plug (CTH) (•) / – (•) / – (•) / – (•) / – (•) / – (•) / – (•) / – (•) / – – / (•) – –

Mulch from seat – – – – – – – – – • •

NOMINAL POWERA new machinery directive (2006 / 42 / EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power rating of the engines indicated is the average net power output during a normal working situations and fulfilling applicable noise regulations (at specified rpm, see owners manual) of a typical production engine for the engine model measured to SAE standard J 1349 / ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and other variables.

32

ZERO TURN MOWERS RZ4221 RZ4622T RZ4222TF RZ5424T RZ4824TFAvailable in Australia only

EZ4824TF MZ5226 MZT61 PZT54 PZ29 PZ34

Article Number 967176101 967176201 967036501 967003702 967003803 966659502 966690503 967177009 966613403 966553801 966553901



Husqvarna Endurance Series™ Kawasaki FR Series Husqvarna Endurance

Series™Husqvarna Endurance


Series™Husqvarna Endurance Series™ Commercial Kawasaki FX Series Kawasaki FX Series Kawasaki FX Series

Engine type Single V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin


Air filter Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Heavy-Duty Canister Heavy-Duty Canister Heavy-Duty Canister

Cutting width, inches 42 46 42 54 48 48 52 61 54 54 - 61 60 - 72

Adjustable cutting height, mm 38.0 – 102.0 38.1 – 102.0 38.1 – 101.6 38.1 – 114.3 38.0 – 102.0 38.1 – 114.3 38.1 – 114.3 38.1 – 114.3 38.1 - 139.7 25.0 – 127.0 25.0 – 127.0

Deck lift system Hand-operated Hand-operated Hand-operated Hand-operated Hand-operated Hand-operated Foot-activated Foot-activated Foot-activated Foot-activated Foot-activated

Anti-scalp wheels – 3 – 4 2 2 2 2 2 4 - 5 5 - 6

Deck type Stamped 13 Gauge Stamped 13 Gauge Fabricated 11 Gauge Stamped 12 Gauge Fabricated 11 Gauge Fabricated 11 Gauge Fabricated 11 Gauge Fabricated 11 Gauge Fabricated 10 Gauge Fabricated 7 Gauge / COMBI Fabricated 7 Gauge / COMBI


Electric clutch, ft/lb – 105 105 90 105 105 200 200 150 250 250

Hydro pumps - wheel motors, cu.in. / cc EZT EZT EZT EZT EZT ZT2800 ZT3100 ZT3400 ZT3400 12/197 - 18/295 16/262 - 18/295

Speed min, max (fwd / rev), km/h 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0-13.7 / 0-8.0 0-16.1 / 0-8.1 0-16.1 / 0-8.0 0–19.3 / 0–9.7 0–19.3 / 0–9.7

Front caster tires, inches 11 x 4-5 11 x 4-5 11 x 4-5 11 x 6-5 11 x 6-5 11 x 6-5 13 x 6.5-6 13 x 6.5-6 13 x 6.5-5 13 x 6.5-6 flat free 13 x 6.5-6 flat free

Rear drive tires, inches 18 x 7.5-8 18 x 8.5-8 18 x 8.5-8 18 x 9.5-8 18 x 9.5-8 20 x 8-8 22 x 10-10 23 x 10.5-12 23 x 10.5-12 23 x 10.5-12 24 x 12-12

Fuel capacity, litres 11.4 11.4 13.3 13.3 11.4 13.3 18.9 18.9 41.6 41.6 41.6

Hydraulic reservoir, litres – – – – – – – – – 5.7 5.7

Weight, kgs 195 263.1 263.1 290.3 269.9 290 335.7 358.3 485.4 572 - 599 599 - 635

Base machine width (chute up), cm 109.2 121.9 109.2 144.8 123.2 123.2 137.2 158.2 135.9 Subject to deck type fitted Subject to deck type fitted

Base machine length/height, cm 190.5 / 111.7 190.5 / 101.6 190.5 / 101.6 190.5 / 101.6 190.5 / 101.6 189.2 / 119.4 191.8 / 106.7 191.8 / 115.6 205.7 / 116.8 209.5 / 120.6 209.6 / 120.7

Productivity, acres / hr* 2.2 2.4 2.2 2.8 2.5 2.5 3.5 4.9 4.2 4.8 - 5.3 5.8 - 7.0

Seat type Standard Standard Standard Standard Standard High-back, arm rests High-back, arm rests PZT Premium, arm rests PZT Premium, arm rests PZ Premium Suspension PZ Premium Suspension

Digital hour meter – • • • • • • • • • •Oil cooler – – – – – – – – – – –

Ergonomic, adjustable steering levers • • • • • • • • • • •Heavy-duty dampeners – – – – – – – – • • •Foldable ROPS – – – – – – (•) • • • •Drink holder • • • • • • • • • • •ACCESSORIES

Mulch Kit (•) (•) (•) (•) (•) (•) (•) (•) (•) (•) (•)

Collection system (•) (•) (•) (•) (•) (•) (•) (•) (•) (•) (•)

Optional blades (•) (•) (•) (•) (•) (•) (•) (•) (•) (•) (•)

Suspension seat – – – – – – – (•) (•) • •*Productivity will vary dependant on attainable ground speed, mowing conditions and height of cut. Productivity (80% efficiency) is calculated by width of cut X ground speed/120 = Acres per hour.

TECHNICAL SPECIFICATIONS - ZERO TURN MOWERS

33

ZERO TURN MOWERS RZ4221 RZ4622T RZ4222TF RZ5424T RZ4824TFAvailable in Australia only

EZ4824TF MZ5226 MZT61 PZT54 PZ29 PZ34

Article Number 967176101 967176201 967036501 967003702 967003803 966659502 966690503 967177009 966613403 966553801 966553901



Husqvarna Endurance Series™ Kawasaki FR Series Husqvarna Endurance



Series™Husqvarna Endurance Series™ Commercial Kawasaki FX Series Kawasaki FX Series Kawasaki FX Series

Engine type Single V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin V-Twin


Air filter Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Standard OEM Heavy-Duty Canister Heavy-Duty Canister Heavy-Duty Canister

Cutting width, inches 42 46 42 54 48 48 52 61 54 54 - 61 60 - 72

Adjustable cutting height, mm 38.0 – 102.0 38.1 – 102.0 38.1 – 101.6 38.1 – 114.3 38.0 – 102.0 38.1 – 114.3 38.1 – 114.3 38.1 – 114.3 38.1 - 139.7 25.0 – 127.0 25.0 – 127.0

Deck lift system Hand-operated Hand-operated Hand-operated Hand-operated Hand-operated Hand-operated Foot-activated Foot-activated Foot-activated Foot-activated Foot-activated

Anti-scalp wheels – 3 – 4 2 2 2 2 2 4 - 5 5 - 6

Deck type Stamped 13 Gauge Stamped 13 Gauge Fabricated 11 Gauge Stamped 12 Gauge Fabricated 11 Gauge Fabricated 11 Gauge Fabricated 11 Gauge Fabricated 11 Gauge Fabricated 10 Gauge Fabricated 7 Gauge / COMBI Fabricated 7 Gauge / COMBI


Electric clutch, ft/lb – 105 105 90 105 105 200 200 150 250 250

Hydro pumps - wheel motors, cu.in. / cc EZT EZT EZT EZT EZT ZT2800 ZT3100 ZT3400 ZT3400 12/197 - 18/295 16/262 - 18/295

Speed min, max (fwd / rev), km/h 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0–10.5 / 0–5.6 0-13.7 / 0-8.0 0-16.1 / 0-8.1 0-16.1 / 0-8.0 0–19.3 / 0–9.7 0–19.3 / 0–9.7

Front caster tires, inches 11 x 4-5 11 x 4-5 11 x 4-5 11 x 6-5 11 x 6-5 11 x 6-5 13 x 6.5-6 13 x 6.5-6 13 x 6.5-5 13 x 6.5-6 flat free 13 x 6.5-6 flat free

Rear drive tires, inches 18 x 7.5-8 18 x 8.5-8 18 x 8.5-8 18 x 9.5-8 18 x 9.5-8 20 x 8-8 22 x 10-10 23 x 10.5-12 23 x 10.5-12 23 x 10.5-12 24 x 12-12

Fuel capacity, litres 11.4 11.4 13.3 13.3 11.4 13.3 18.9 18.9 41.6 41.6 41.6

Hydraulic reservoir, litres – – – – – – – – – 5.7 5.7

Weight, kgs 195 263.1 263.1 290.3 269.9 290 335.7 358.3 485.4 572 - 599 599 - 635

Base machine width (chute up), cm 109.2 121.9 109.2 144.8 123.2 123.2 137.2 158.2 135.9 Subject to deck type fitted Subject to deck type fitted

Base machine length/height, cm 190.5 / 111.7 190.5 / 101.6 190.5 / 101.6 190.5 / 101.6 190.5 / 101.6 189.2 / 119.4 191.8 / 106.7 191.8 / 115.6 205.7 / 116.8 209.5 / 120.6 209.6 / 120.7

Productivity, acres / hr* 2.2 2.4 2.2 2.8 2.5 2.5 3.5 4.9 4.2 4.8 - 5.3 5.8 - 7.0

Seat type Standard Standard Standard Standard Standard High-back, arm rests High-back, arm rests PZT Premium, arm rests PZT Premium, arm rests PZ Premium Suspension PZ Premium Suspension

Digital hour meter – • • • • • • • • • •Oil cooler – – – – – – – – – – –

Ergonomic, adjustable steering levers • • • • • • • • • • •Heavy-duty dampeners – – – – – – – – • • •Foldable ROPS – – – – – – (•) • • • •Drink holder • • • • • • • • • • •ACCESSORIES

Mulch Kit (•) (•) (•) (•) (•) (•) (•) (•) (•) (•) (•)

Collection system (•) (•) (•) (•) (•) (•) (•) (•) (•) (•) (•)

Optional blades (•) (•) (•) (•) (•) (•) (•) (•) (•) (•) (•)

Suspension seat – – – – – – – (•) (•) • •*Productivity will vary dependant on attainable ground speed, mowing conditions and height of cut. Productivity (80% efficiency) is calculated by width of cut X ground speed/120 = Acres per hour.



34

FRONT RIDERS R120C R220T R322TAWD R422TSAWD P524 P525D

Article Number 967178601 967189401 967189601 966772901 966607201 966607401

Engine manufacturer Husqvarna Endurance Series™



Husqvarna Endurance Series™ Kawasaki FX Series Kubota Diesel

Engine type Single Cylinder V-Twin V-Twin V-Twin V-Twin

Net power @ preset rpm 10.2kW @ 2900 rpm 12.6 kW @ 3000 rpm 12.6 kW @ 3000 rpm 12.6kW @ 2900rpm 13.9kW @ 3000rpm 18.7kW @ 3000rpm

Alternator, A 3 16 16 16 20 40

Battery capacity, V/Ah 12 / 21 12 / 24 12 / 24 12/24 12/24 12 / 62

Fuel tank capacity, litres 7 12 12 17 24 25

Transmission Hydrostatic Hydrostatic Hydrostatic AWD Hydrostatic AWD Hydrostatic AWD Hydrostatic AWD

Transmission manufacturer Tuff Torq Tuff Torq Tuff Torq Kanzaki K664 Kanzaki KTM23 Kanzaki KTM23

Tyre size, front and rear 165/60-8 165/60-8 165/60-8 195/65-8 18x8.58" 20x10-10"

Cutting width, cm 95 103 112 112 - 122 112 - 122 132 - 155

Cutting height, mm 25 - 75 25 - 75 25 - 75 25 - 75 25 - 75 25 - 127

Number of cutting blades 2 3 3 3 3 3

Wheel base, cm 84.5 88.7 88.7 100 100 106

Noise power, dB(A)/rpm TBA TBA TBA <102/3000 104 105

Width/height/length, base machine, cm 126*/108/229 89/107/190 89/115/202 90/166/207 98/115/205 114/133/211

Weight excl. cutting deck, kg 221* 235.9 259 330 385 675

Air filter type Heavy-duty canister Heavy-duty canister

Seat type Standard Standard Comfort high back Premium w/ arm rests Premium w/ arm rests Full suspension w/ arm rests

Power steering – • • •All-Wheel-Drive (AWD) – – • • • •Oil Cooler – • •Hydraulic equipment lift – – – • • •Service position – • • • • •Roll-Over-Protection (ROPS) – – – – – •Headlights – – • • • •Quick connection – • • • • •Hour meter – • • •12V outlet – • • •CUTTING DECK OPTIONS

BioClip® 95 • – – – – –

CombiClip® 103 – • – – – –

CombiClip® 112 – – • – – –

Combi Turf 112 / Combi Turf 122 – – – (•) / (•) (•) / (•) –

Combi Turf 132 / Combi Turf 155 – – – – – (•) / (•)

LAWN MOWERS LC18 LC19Available in Australia only

LC19A LC19AP WB48SE While stocks last

WB53SE LB548SE GX560

Article Number 967257201 967257301 967257401 967257501 966440902 966441002 967256901 964000699

Engine Briggs & Stratton DOV

Briggs & Stratton DOV

Briggs & Stratton DOV

Briggs & Stratton DOV I/C Honda OHC Honda OHC Honda OHC Honda OHC

Power, kW 2.7 2.7 2.7 2.7 2.8 2.8 2.8 2.8

Fuel tank capacity, litres 1.05 1.05 1.05 1.05 1.1 1.1 1.1 0.93

Drive system Push Push Push Push Self-propelled, single speed

Self-propelled, single speed

Self-propelled, single speed Hover

Drive wheels – – – – Front Front Front –

Speed, km/h – – – – 0-4 0-4 0-4 –

Cutting deck material Steel Steel Alloy Alloy Aluminium Aluminium Aluminium ABS Plastic

Cutting methods BioClip® / Collect BioClip® / Collect BioClip® /

CollectBioClip® / Collect

BioClip® / Rear eject

BioClip® / Rear eject

BioClip® / Rear eject BioClip®

Cutting width, cm / Cutting height, mm 46 / 15-80 48 / 15-80 48 / 15-55 48 / 15-55 48 / 30-60 53 / 30-60 48 / 30-60 50.5 / 10-30

Sound level, dB(A) 75 75 75 75 76 78 76 86

Weight, kg 31.5 33.5 34.0 34.0 32.5 34 32.5 15

ReadyStart® engine • • • • – – – –

Collector • • • • – – – –

Anti-vibration handle – – – – • • • –

Tilting handle/Folding handle – / • – / • – / • – / • • / – • / – • / – – / •Double ball-bearing wheels • • • • • • • –

TECHNICAL SPECIFICATIONS - FRONT RIDERS & LAWNMOWERS

35

TURF CUTTER SC18

Article Number 968999533

Engine Honda GX Series

Displacement, cc 163

Net power @ preset rpm 3.2kW @ 3000rpm

Air filter Two-stage

Gearbox, forward / reverse 4 / 1

Fuel tank capacity, litres 3.6

Tyre size, front / rear, inches 10 / 10

Working depth / width, cm 6.5 / 46

Weight, kg 149

Four-wheel drive •Automatic decompression •Electronic ignition system •Automatic oil guard •Drive wheel •

AERATOR AR19





Air filter Two stage

Removable weights, number / kg 2 / 16.3

Fuel capacity, litres 2.5

Tyre size, front / rear, inches 10x6 / 8x2


Weight, kg 131

Stable, pneumatic front wheel •Automatic decompression •Electronic ignition system •Automatic oil guard •Drive wheel •

DETHATCHER DT22H





Air filter Two stage

Central height adjustment •Fuel tank capacity, litres 3.6

Tyre size, front / rear, inches 8x1.75 / 10x1.75


Weight excl. accessories, kg 65

Permanently-lubricated ball bearings •Ergonomic handlebar •Belt drive with disengagement bar •Automatic oil guard •Drive wheel •


AUTOMOWER® 305 320 330X 265 ACX

Article Number 966761506 967167906 967168206 966747606

Recommended working area 0-500m2 +/-20% 0-2200m2 +/-20% 0-3200m2 +/-20% 0-6000m2 +/-20%

Area capacity per hour 31m2 90m2 135m2 230m2

Battery type/capacity, Ah Li-ion / 1.6 Li-ion / 3.2 Li-ion / 6.4 Li-ion / 7.5

Battery voltage, V 18 18 18 22

Charging system Automatic Automatic Automatic Automatic

Charging current, A 1.0 2.0 4.0 8.0

Average charging time, min 90 60 60 40

Average mowing time per charge, min 60 80 150 80

Cutting system 3 pivoting razor blades 3 pivoting razor blades 3 pivoting razor blades 5 pivoting razor blades

Cutting height/width, mm 20-50 / 170 20-60 / 240 20-60 / 240 20-60 / 320

Sound level, dB(A) 61 58 58 65

Weight, kg 6.7 11.5 13.2 12.9

INSTALLATION ACCESSORIES

Loop wire, m 150 250 400 500

Cramps, pcs 200 300 400 200

Extra blades, pcs 9 9 9 30


STUMP GRINDER SG13



Engine Honda OHV


Air filter Cyclone

Fuel tank capacity, litres 6.5

Tyre size, rear, inches 12

Grinding disc, cm/inches Vertical, 35.6 / 14

Working depth, mm 300

Weight, kg 113

Adjustable handlebar •Automatic decompression •Electronic ignition system •Carbide-tooth grinding disk •Indicator for low oil level •

TECHNICAL SPECIFICATIONS - AUTOMOWER® & SPECIALITY PRODUCTS

Part

Num

ber:

586

74 5

2-01

Com

m R

ef: 2

014L

AWN

Husqvarna is a registered trademark. Copyright © 2014 HUSQVARNA. All rights reserved.

Husqvarna Australia Pty Ltd. ABN 45 115 475 619 Locked Bag 5, Central Coast BC NSW 2252. Phone: 02 4352 7400. Fax: 02 4352 7499

Husqvarna New Zealand Ltd. Company No. 111 861.PO Box 76-437, Manukau City, Auckland 2241. Phone: 09 920 2410. Fax: 09 920 2429.

www.husqvarna.com

Date post:	07-Apr-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Lawn Care Products - Yellow Pages · 2017-05-22 · 2 3 First class lawn care from a first class...

Documents